GROUP A

Tubular arms H.T.R.(High Torsion Resistance)

Drop forged parts

Floating head system

Oil cooler withthermostat (option)

HYDRAULICREACH MOWERS

Cable controls Monolever electric control

HP Tractor 40 50 60 70 Min. tractor weightKg

Min. tractor widthm

T 380D Smart 1700 1,50T 430D Smart 2000 1,70T 430DR Smart 2000 1,70

Working positions (m)T 380D T 430D

A m 3,84 4,33

B m 2,43 2,91

C m 0,88 1,21

D m 2,25 2,55

E m 4,21 4,70

F m 1,15 0,88

G m 1,54 1,71

H m 3,41 3,90

F I

E

D

CG

A

HThe polypropylene oil tank is separated from the frame and allows it to be isolated from any structural stress. Fully recyclable.

Developed in collaboration with:

Mechanical breakaway

Polypropylene oil tank

Mechanical breakaway

Two independenthydraulic systems

Innerlining

Tubular armsH.T.R.

Tubular armsH.T.R.

Reversible rotor by cable

Adjustable rearroller

Drop forged brackets for the arms

HP 20 available to the rotorHP 31 max to hydraulic motor

new

FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - info@ferrisrl.it - www.ferrisrl.itSpare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: parts@ferrisrl.itAfter Sales Service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: service@ferrisrl.it

Equipped with:

IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructionsand warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.

* Reach measured from tractor centre line to head edge.

Technical dataModel Max horizontal

reach*Weight Oil Rotor Pto Flail head

angle

m Kg l Rpm MAX Rpm

T380D Smart 3,84 490 70 3.000 540 235°

T430D Smart 4,33 495 70 3.000 540 235°

Machines with cable controls “Classic”Code Model SM38LSFDO10V T380D Smart with flail head TID100 m 1,00 SM43LSFDO10V T430D Smart with flail head TID100 m 1,00

Machines with electric controls “Electra”Code Model SM38LSCDO10V T380D Smart with flail head TID100 m 1,00 SM43LSCDO10V T430D Smart with flail head TID100 m 1,00

OptionCode Lenght (cm) TST5017 (640-890) Stabilizers to the tractor TD3703 “Delta yoke” for stabilizers TGA4611 (640-890) Stabilizers for “Delta yoke” T43003 Oil cooler with thermostat T43004 Lift float (LFA mechanic)

Flail head TID100

Width (m) 1,00Rotor speed (rpm) 3000Blade tip speed (m/sec) 60Flail head angle 190°Weight (Kg) 129

TID100Direct drive

new

Flails TID100Interchangeable on the same rotor

Multi-use and straight blades for:grass, shrubs, bushes, sticks, woodØ max 3 cm

Articulated “Y“ flails for:grass and bushesØ max 2 cm

Bootie blades for:grass, hedges, bushesØ max 2 cm

Cod. 0901158 + Cod. 0901159 Cod. 0901049 Cod. 0901138

n° 36+18 n° 36 n° 18

Standard

� Flail Head

� FLOATING head system

� Totally independent hydraulic system

� Tubular arms H.T.R. (High Torsion Resistance)

� Drop forged brackets for the arms

� Mechanical breakaway (arm protection in case of obstacles)

� Reversible rotor by cable

� Front and rear abrasion resistant guard for flail head

� Oil and Pto shaft

Warning