View
22
Download
0
Category
Preview:
Citation preview
DSB 1/3.5
1/6DSB
DSB 1
DSB 1/3.5
DSB 1/6
The DSB 1 Series hydraulic drilling rigs have proventheir performance worldwide in the widest variety ofgeological situations.
They are genuinely universal drilling rigs which canbe equipped for any drilling task thanks to theirmodular design. The DSB 1 rigs have the highestquality components and assemblies which haveexcelled throughout many years of heavy duty use.They ensure that your drilling rig from NORDMEYERSMAG will be fast, reliable and cost-effective for along time to come.
A particular feature of NORDMEYER SMAG drillingrigs is their highly efficient hydraulic system whichhas proven itself in heavy duty construction site use.It is made up of separate hydraulic systems whichwork in closed, open and load sensing circuits. Thismeans that the load placed on one assembly doesnot affect the performance of the other assemblies.
The hydraulic control system is a combination ofmanual hydraulic valves and a dependable CAN Buscontrol. A Process Data Module (PDM) with multi-functional joysticks forms the central display andcontrol unit at the ergonomically designedoperating stand. All of the drilling functions andmotor performance parameters can be controlled,monitored and documented from here.
NORDMEYER SMAG drilling rigs meet the CE, BGUV,TÜV, German Mining Authority and EN16228standards.
DSB 1/3.5
DSB 1/6
• Soil sampling for analysing the groundon building sites
• Geological and hydrologicalinvestigations, e.g. waste deposits orinvestigation of contaminated ground
• Water wells for domestic watersupply, agricultural irrigation or site drainage
• Special tasks, e.g. searching for old munitions• Geothermal
Applications:
Conventional Drilling
up to max. diameter of 640 mm
in front of the mast
Drilling with Casings
for casings dia. 324 mm or max. dia. 419 mm with
hydr. rotary table and cable percussion device
Undisturbed Soil Sampling
with soil sampler BPE, percussion core barrel RKR
or wire line DTH hammer.
Down-The-Hole Hammer Drilling
with stand-by compressor
up to drilling dia. 8½” = dia. 216 mm
Rotary Core Drilling
with single, double or wire line core barrel.
Straight Flush Rotary Drilling
direct flush rotary drilling up toA)
dia. 12¾ ” = dia. 324 mmreverse circulation drilling with sludgeB)
pump or air-lift drilling with compressorup to drilling dia. 640 mm
Nordmeyer SMAG Drilling Technologies GmbH
Werner-Nordmeyer-Straße 3D-31226 PeineGermany
Telefon +49 5171 - 542 - 0Telefax +49 5171 - 542 - 110
www.nordmeyer-smag.de
info@nordmeyer-smag.de
We reserve the right to make changes without notice.State: 04-2016
Recommended