View
4
Download
0
Category
Preview:
Citation preview
DRUM BOILER PROBES
AT Technical Services & Supply CC PO Box 8141, Edleen, 1625 South Africa.
Tel: +27 11 394 2985 Fax: +27 11 394 5621 Email: atts@atts.co.za
1. A direct replacement for your existing electrode-probes and supplied with approved gasket
2. All attachment options available, clamp plate, captive compression nut and screw-in fixing
3. Advanced sealing method specifically designed for thermal fluctuations when two shifting 4. All probes have been tested to twice their rated pressure for guaranteed reliability in service 5. All boxes have your Part No., Comm Code or Stores No. plus photo for easy identification
Pressure Rating: 207 Bar @ 370ºC (3000psi @ 700ºF)
or: 120 Bar @ 340ºC (1760psi @ 640ºF)
Pressure Test : 420 Bar (6200psi) @ 20ºC for 24 hours
or: 240 Bar (3500psi) @ 20ºC for 24 hours
Insulation Test : Greater than 1000M after all tests
A NEW RANGE OF ELECTRODE-PROBES TO SUIT ALL MANUFACTURERS
Alumina and Zirconia Ceramic Probes Available Across The Range
PROBES PLUS LIMITED
1. A direct replacement for your existing
electrode-probes and supplied with
gasket and full instructions.
2. Advanced patented sealing method
specifically designed for thermal
fluctuations when two shifting.
3. All probes have been tested to twice
their rated pressure for guaranteed
reliability in service.
4. All probes individually tested and serial
numbered for absolute quality control
Technical Specification: Probe Type 411-89-00
Pressure Rating: 207 Bar @ 370ºC (3000psi @ 700ºF)
Pressure Test: 420 Bar (6200psi) @ 20ºC for 24 hours
Insulation Test: Greater than 1000M after all tests.
Fully Guaranteed
THE DAWN OF A NEW ERA, THE NEW RANGE OF ELECTRODE-PROBES
1. Boxes customised for your specific power plant. 2. All boxes include your Part Number, Comm Code or
Stores Number on each end in large text. 3. Your Part Number, our Part Number, Maximum
Pressure Rating, Test Pressure Rating, and individual probe Serial Number all on side flap.
4. Drawing of enclosed probe on every face of box. 5. Full fittings instructions enclosed including any
necessary torque settings. 6. Anti roll foam packaging and easy open reusable
box specifically for use on high or open steelwork.
PROBES PLUS LIMITED
1. A direct replacement for your existing
electrode-probes and supplied with
gasket and full instructions.
2. Advanced patented sealing method
specifically designed for thermal
fluctuations when two shifting.
3. All probes have been tested to twice
their rated pressure for guaranteed
reliability in service.
4. All probes individually tested and serial
numbered for absolute quality control
Technical Specification: Probe Type 541-89-00
Pressure Rating: 207 Bar @ 370ºC (3000psi @ 700ºF)
Pressure Test: 420 Bar (6200psi) @ 20ºC for 24 hours
Insulation Test: Greater than 1000M after all tests.
Fully Guaranteed
THE DAWN OF A NEW ERA, THE NEW RANGE OF ELECTRODE-PROBES
1. Boxes customised for your specific power plant. 2. All boxes include your Part Number, Comm Code or
Stores Number on each end in large text. 3. Your Part Number, our Part Number, Maximum
Pressure Rating, Test Pressure Rating, and individual probe Serial Number all on side flap.
4. Drawing of enclosed probe on every face of box. 5. Full fittings instructions enclosed including any
necessary torque settings. 6. Anti roll foam packaging and easy open reusable
box specifically for use on high or open steelwork.
PROBES
PLUS
PROBES PLUS LIMITED
1. A direct replacement for your existing
electrode-probes and supplied with
gasket and full instructions.
2. Advanced patented sealing method
specifically designed for thermal
fluctuations when two shifting.
3. All probes have been tested to twice
their rated pressure for guaranteed
reliability in service.
4. All probes individually tested and serial
numbered for absolute quality control
Technical Specification: Probe Type 611-89-00
Pressure Rating: 207 Bar @ 370ºC (3000psi @ 700ºF)
Pressure Test: 420 Bar (6200psi) @ 20ºC for 24 hours
Insulation Test: Greater than 1000M after all tests.
Fully Guaranteed
THE DAWN OF A NEW ERA, THE NEW RANGE OF ELECTRODE-PROBES
1. Boxes customised for your specific power plant. 2. All boxes include your Part Number, Comm Code or
Stores Number on each end in large text. 3. Your Part Number, our Part Number, Maximum
Pressure Rating, Test Pressure Rating, and individual probe Serial Number all on side flap.
4. Drawing of enclosed probe on every face of box. 5. Full fittings instructions enclosed including any
necessary torque settings. 6. Anti roll foam packaging and easy open reusable
box specifically for use on high or open steelwork.
PROBES PLUS LIMITED
1. A direct replacement for your existing
electrode-probes and supplied with full
instructions.
2. Advanced patented sealing method
specifically designed for thermal
fluctuations when two shifting.
3. All probes have been tested to twice
their rated pressure for guaranteed
reliability in service.
4. All probes individually tested and serial
numbered for absolute quality control
Technical Specification: Probe Type 621-89-00
Pressure Rating: 207 Bar @ 370ºC (3000psi @ 700ºF)
Pressure Test: 420 Bar (6200psi) @ 20ºC for 24 hours
Insulation Test: Greater than 1000M after all tests.
Fully Guaranteed
THE DAWN OF A NEW ERA, THE NEW RANGE OF ELECTRODE-PROBES
1. Boxes customised for your specific power plant. 2. All boxes include your Part Number, Comm Code or
Stores Number on each end in large text. 3. Your Part Number, our Part Number, Maximum
Pressure Rating, Test Pressure Rating, and individual probe Serial Number all on side flap.
4. Drawing of enclosed probe on every face of box. 5. Full fittings instructions enclosed including any
necessary torque settings. 6. Anti roll foam packaging and easy open reusable
box specifically for use on high or open steelwork.
PROBES PLUS LIMITED
1. A direct replacement for your existing
electrode-probes and supplied with a
gasket and full instructions.
2. Advanced patented sealing method
specifically designed for thermal
fluctuations when two shifting.
3. All probes have been tested to twice
their rated pressure for guaranteed
reliability in service.
4. All probes individually tested and serial
numbered for absolute quality control
Technical Specification: Probe Type 631-69-00
Pressure Rating: 120 Bar @ 340ºC (1740psi @ 650ºF)
Pressure Test: 240 Bar (3500psi) @ 20ºC for 24 hours
Insulation Test: Greater than 1000M after all tests.
Fully Guaranteed
THE DAWN OF A NEW ERA, THE NEW RANGE OF ELECTRODE-
PROBES
1. Boxes customised for your specific power plant. 2. All boxes include your Part Number, Comm Code or
Stores Number on each end in large text. 3. Your Part Number, our Part Number, Maximum
Pressure Rating, Test Pressure Rating, and individual probe Serial Number all on side flap.
4. Drawing of enclosed probe on every face of box. 5. Full fittings instructions enclosed including any
necessary torque settings. 6. Anti roll foam packaging and easy open reusable
box specifically for use on high or open steelwork.
PROBES PLUS LIMITED
1. A direct replacement for your existing
electrode-probes and supplied with a
gasket and full instructions.
2. Advanced patented sealing method
specifically designed for thermal
fluctuations when two shifting.
3. All probes have been tested to twice
their rated pressure for guaranteed
reliability in service.
4. All probes individually tested and serial
numbered for absolute quality control
Technical Specifications:
Probe Type 632-69-00 (120 bar ceramic version) Pressure Rating: 120 Bar @ 340ºC (1740psi @ 650ºF)
Pressure Test: 240 Bar (3500psi) @ 20ºC for 24 hours
Probe Type 632-47-00 (23 bar PTFE version) Pressure Rating: 23 Bar @ 220ºC (330psi @ 430ºF)
Pressure Test: 46 Bar (660psi) @ 20ºC for 24 hours
Insulation Test: Greater than 1000M after all tests.
Fully Guaranteed
THE DAWN OF A NEW ERA, THE NEW RANGE OF ELECTRODE-
PROBES
For other probes visit our Internet web site at: http://www.probesplus.com
1. Boxes customised for your specific power plant. 2. All boxes include your Part Number, Comm Code or
Stores Number on each end in large text. 3. Your Part Number, our Part Number, Maximum
Pressure Rating, Test Pressure Rating, and individual probe Serial Number all on side flap.
4. Drawing of enclosed probe on every face of box. 5. Full fittings instructions enclosed including any
necessary torque settings. 6. Anti roll foam packaging and easy open reusable
box specifically for use on high or open steelwork.
PROBES PLUS LIMITED
1. A direct replacement for your existing
electrode-probes and supplied with full
instructions.
2. Advanced patented sealing method
specifically designed for thermal
fluctuations when two shifting.
3. All probes have been tested to twice
their rated pressure for guaranteed
reliability in service.
4. All probes individually tested and serial
numbered for absolute quality control
Technical Specification: Probe Type 721-89-00
Pressure Rating: 207 Bar @ 370ºC (3000psi @ 700ºF)
Pressure Test: 420 Bar (6200psi) @ 20ºC for 24 hours
Insulation Test: Greater than 1000M after all tests.
Fully Guaranteed
THE DAWN OF A NEW ERA, THE NEW RANGE OF ELECTRODE-PROBES
For other probes visit our Internet web site at: http://www.probesplus.com
1. Boxes customised for your specific power plant. 2. All boxes include your Part Number, Comm Code or
Stores Number on each end in large text. 3. Your Part Number, our Part Number, Maximum
Pressure Rating, Test Pressure Rating, and individual probe Serial Number all on side flap.
4. Drawing of enclosed probe on every face of box. 5. Full fittings instructions enclosed including any
necessary torque settings. 6. Anti roll foam packaging and easy open reusable
box specifically for use on high or open steelwork.
PROBES PLUS LIMITED
AT Technical Services & Supply CC PO Box 8141, Edleen, 1625 South Africa.
Tel: +27 11 394 2985 Fax: +27 11 394 5621 Email: atts@atts.co.za
1. A direct replacement for your existing
electrode-probes and supplied with full
instructions.
2. Advanced patented sealing method
specifically designed for thermal
fluctuations when two shifting.
3. All probes have been tested to twice
their rated pressure for guaranteed
reliability in service.
4. All probes individually tested and serial
numbered for absolute quality control
Technical Specification: Probe Type 821-89-00
Pressure Rating: 207 Bar @ 370ºC (3000psi @ 700ºF)
Pressure Test: 420 Bar (6200psi) @ 20ºC for 24 hours
Insulation Test: Greater than 1000M after all tests.
Fully Guaranteed
THE DAWN OF A NEW ERA, THE NEW RANGE OF ELECTRODE-PROBES
For other probes visit our Internet web site at: http://www.probesplus.com
1. Boxes customised for your specific power plant. 2. All boxes include your Part Number, Comm Code or
Stores Number on each end in large text. 3. Your Part Number, our Part Number, Maximum
Pressure Rating, Test Pressure Rating, and individual probe Serial Number all on side flap.
4. Drawing of enclosed probe on every face of box. 5. Full fittings instructions enclosed including any
necessary torque settings. 6. Anti roll foam packaging and easy open reusable
box specifically for use on high or open steelwork.
Recommended