View
68
Download
0
Category
Tags:
Preview:
DESCRIPTION
District 8-0 Winter Construction School February 23rd, 2012 PTM 611 Linda A. Atkinson Bureau of Project Delivery (BOPD) Innovation & Support Services Division (ISSD) Construction Quality Assurance Section (CQAS). PTM 611. - PowerPoint PPT Presentation
Citation preview
www.dot.state.pa.us
District 8-0 Winter Construction SchoolFebruary 23rd, 2012
PTM 611
Linda A. AtkinsonBureau of Project Delivery (BOPD)
Innovation & Support Services Division (ISSD)Construction Quality Assurance Section (CQAS)
www.dot.state.pa.us
PTM 611
• PTM 611 Making and Curing Concrete Compression and Flexural Test Specimens in the Field
• Revised December 2011
• Change 5 to the 2003 edition of Publication 19
www.dot.state.pa.us
PTM 611
• Materials Quality Assurance Stewardship Review
– Recommendation
• “Security of field cured cylinders should be improved.”
www.dot.state.pa.us
PTM 611
• Questionnaire to all 50 States• Best Practices• Dissimilar Acceptance and Quality Control
Processes
– Nothing or Not Applicable (20)– Locks on Cure Boxes (2)– Metal Tags (1)
www.dot.state.pa.us
PTM 611
www.dot.state.pa.us
PTM 611
• Metal Tags
>5mm
Saw orGrind into Tolerance
www.dot.state.pa.us
PTM 611
• Destructible Stickers
• Controlled Environment
• Worked Good
www.dot.state.pa.us
PTM 611
• Statewide Pilot Project
– 3 Projects per District– Pre-fab facilities
www.dot.state.pa.us
PTM 611
00001
00251 00002
00252
00253
00003
00254
00004
00256
00006
00255
00005
00001
0025100002
00252
00003
00253
00004
00254
00005
0025500006
00256
www.dot.state.pa.us
www.dot.state.pa.us
PTM 611
• Results…………………….
Some Good
www.dot.state.pa.us
• Some NOT SO GOOD….
www.dot.state.pa.us
PTM 611
• Back to Basics
www.dot.state.pa.us
PTM 611
• Making and Curing Concrete Compression and Flexural Test Specimens in the Field
– Added Section 12
• Identification and Security of Compression Test Specimen Molds and Compression Test Specimens Molded on Construction Projects
www.dot.state.pa.us
PTM 611
• 12.1 Identification of Specimen Molds
– A PENNDOT Representative shall identify each specimen mold with the following info
• Date Molded• Construction Area• Specimen Type• Series Number• Class of Concrete• AND Most Importantly…….
www.dot.state.pa.us
PTM 611
• Each Specimen Mold Must Contain the Signature of a
– PennDOT Representative– Contractor’s Certified Technician
• Technician’s Certification Number
www.dot.state.pa.us
PTM 611
• 12.2 Identification of Specimens
– The PennDOT Representative will transfer the EXACT SAME Info on the Specimens
• Date Molded• Construction Area• Specimen Type• Series Number• Class of Concrete• AND Most Importantly……….
www.dot.state.pa.us
PTM 611
• Each Specimen Must Contain the Signature of a
– PennDOT Representative– Contractor’s Certified Technician
• Certification Number
www.dot.state.pa.us
PTM 611
• Date Molded• Construction Area• Series Number• Class of Concrete• Specimen Type• PennDOT Rep Signature• Concrete Technician• Technician’s Certification #
www.dot.state.pa.us
PTM 611
• TABLE B Section 704
Lot Sizes for Concrete AcceptanceConstruction Areas
Structural Concrete (S)Pavement Concrete (P)Pavement Patching Concrete (PP)Incidental Concrete (M) Pavement Concrete RPS (RPS)
www.dot.state.pa.us
PTM 611
• Specimen Types
– Acceptance Testing (AT)– Quality Control Testing (QC)– Verification Testing (VT)– Independent Assurance Testing (IA)– Quality Assurance Testing (QA)
Recommended