View
1
Download
0
Category
Preview:
Citation preview
Model No: Model No: Model No: Model No:
Port Townsend Dresser Port Townsend Dresser Port Townsend Dresser Port Townsend Dresser
UPC CODE: UPC CODE: UPC CODE: UPC CODE:
Lot number:(TAKEN FROM CARTON)
_____________________________________
Date of purchase:
_______ / _______ / ______________ / _______ / ______________ / _______ / ______________ / _______ / _______
DPCI#:DPCI#:DPCI#:DPCI#:
030-09-1866
DOREL ASIADOREL ASIADOREL ASIADOREL ASIA
DA6504-1
0-65857-16509-8
DO DO DO DO NOTNOTNOTNOT RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE.If a part is missing or damaged, contact our customer service
department. We will replace the part FREEFREEFREEFREE of charge.
Tel #: 1-800-295-1980E-Mail: das@dorel.comFax #: 514-353-7819
*
*
* Use the wall safety strap provided to secure the unit to the wall.
* A Phillips head screwdriver is not included.
*
*
*
*
*
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTYLIMITED WARRANTYLIMITED WARRANTYLIMITED WARRANTYDorel Asia warrants its product to be free from defects in material and workmanship andagrees to remedy any such defect. This warranty covers 1 year from the date of originalpurchase. This warranty is valid only upon presentation of proof of purchase. This is solelylimited to the repair or replacement of defective furniture components and no assemblylabor is included. This warranty does not apply to any product which has been improperlyassembled, subjected to misuse or abuse or which has been altered or repaired in any way.This warranty gives you specific legal rights and you may also have other rights which varyfrom State to State.
WARNING: Should this product become damaged, and/or WARNING: Should this product become damaged, and/or WARNING: Should this product become damaged, and/or WARNING: Should this product become damaged, and/orcomponents are broken or missing, DO NOT USE.components are broken or missing, DO NOT USE.components are broken or missing, DO NOT USE.components are broken or missing, DO NOT USE.
Estimated assembly time: 60 minutes.
CARE AND CLEANINGCARE AND CLEANINGCARE AND CLEANINGCARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may beused occasionally to clean surface. Dry immediately. Do not use any abrasives that maydamage finish. Excessive exposure to sunlight and extreme changes in temperature andmoisture can damage wood furniture.
MAINTENANCEMAINTENANCEMAINTENANCEMAINTENANCE
DO NOTDO NOTDO NOTDO NOT use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
To avoid unnecessary damage, when levelers have been extended, DO NOTDO NOTDO NOTDO NOT drag acrosssurface when moving. Be sure to lift and carry the item to its location.
E-MAIL: das@dorel.comE-MAIL: das@dorel.comE-MAIL: das@dorel.comE-MAIL: das@dorel.com
NOTESNOTESNOTESNOTESEnsure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to the product finish.
Montreal, QuebecMontreal, QuebecMontreal, QuebecMontreal, Quebec
Canada H1G 3L1Canada H1G 3L1Canada H1G 3L1Canada H1G 3L1
CUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customerservice representative first!
CALL 1-800-295-1980CALL 1-800-295-1980CALL 1-800-295-1980CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the productmodel number, color and a detailed description of the part.
Customer Service Department No. 413Customer Service Department No. 413Customer Service Department No. 413Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 10012345 Albert-Hudon Boulevard, Suite 10012345 Albert-Hudon Boulevard, Suite 10012345 Albert-Hudon Boulevard, Suite 100
HARDWARE LISTHARDWARE LISTHARDWARE LISTHARDWARE LIST
1111 2222 3333 4444
5555 6666 7777 8888
9999 10101010 11111111 12121212
LARGE WOOD DOWEL
42 PCS
Ø5 X 28mm
SMALL CAM LOCK SMALL CAM BOLT
SMALL WOOD DOWEL
22 PCS
HANDLE SHORT BOLT
7 PCS
LARGE CAM BOLT
37 PCS
Ø5/32" x 1/2"
LARGE CAM LOCK
37 PCS
14 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Ø8 X 30mm Ø6 X 20mm Ø7 X 35mm
1 PC
ROUND HEAD SCREW FLAT HEAD SCREW BOLT ALLEN KEY
36 PCS 28 PCS 6 PCS
Ø5/8" x 1-1/4"Ø4mm x 1"
28 PCS 28 PCS
Ø3 X 15mm
PARTS LISTPARTS LISTPARTS LISTPARTS LISTAAAA BBBB CCCC DDDD EEEE
FFFF GGGG HHHH IIII JJJJ
KKKK LLLL MMMM NNNN OOOO
PPPP QQQQ RRRR SSSS TTTT
UUUU VVVV WWWW
2 PCS
SUPPORT PANELBACK LOWER RAIL
1 PC
4 PCS 4 PCS
LARGE DRAWER BACK
1 PC 1 PC
LOWER STAND PANEL FRONT TOP RAIL
LARGE RIGHT DRAWER SIDE
1 PC1 PC
SMALL RIGHT DRAWER SIDE SMALL DRAWER BACK SMALL DRAWER BOTTOM
3 PCS 3 PCS
4 PCS
2 PCS
LARGE DRAWER BOTTOM
3 PCS
3 PCS
4 PCS
SMALL FRONT DRAWER PANEL SMALL LEFT DRAWER SIDE
3 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend DresserDA6504-1DA6504-1DA6504-1DA6504-1
UPPER STAND PANEL
2 PCS
RIGHT SIDE PANEL FIXED SHELF
1 PC
TOP PANEL LEFT SIDE PANEL
1 PC
BACK TOP RAIL FRONT MIDDLE RAIL
LARGE LEFT DRAWER SIDE
4 PCS
BACK PANEL LARGE FRONT DRAWER PANEL
FRONT LOWER RAIL
1 PC1 PC 2 PCS
STEP 1:STEP 1:STEP 1:STEP 1:
1 4 PCS
4 2 PCS
11 4 PCS
Insert large wood dowels (1) and large cam bolts (4) into fixed shelf (D).Attach upper stand panels (E) to fixed shelf (D) with bolts (11).Use Allen key (12) to tighten bolts (11).
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
STEP 2:STEP 2:STEP 2:STEP 2:
3 3 PCS
4 3 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert large cam bolts (4) into back lower rails (K) and front lower rail (J).Insert large cam locks (3) into lower stand panel (F).Attach the rails (K & L) to lower stand panel (F) as shown below and secure by rotatinglarge cam locks (3) 1/2-turn clockwise using a Phillips head screwdriver (not included).
STEP 3:STEP 3:STEP 3:STEP 3:
1 2 PCS
3 2 PCS
4 2 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert large wood dowels (1) and large cam locks (3) into front middle rails (I).Insert large cam bolts (4) into lower stand panel (F) as shown.Secure the front middle rails (I) to lower stand panel (F) by rotating large cam locks (3)1/2-turn clockwise using a Phillips head screwdriver (not included).
STEP 4:STEP 4:STEP 4:STEP 4:
1 2 PCS
3 2 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert large wood dowels (1) into fixed shelf (D).Insert large cam locks (3) into lower stand panel (F).Attach fixed shelf (D) to lower stand panel (F) and secure by rotating large cam locks (3)1/2-turn clockwise using a Phillips head screwdriver (not included).
STEP 5:STEP 5:STEP 5:STEP 5:
4 16 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert large cam bolts (4) into left side panel (B) and right side panel (C).
STEP 6:STEP 6:STEP 6:STEP 6:
1 9 PCS
3 6 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert large wood dowels (1) into left side panel (B).Insert large cam locks (3) into rails (I, J, K) and fixed shelf (D) as shown.Attach the assembled frame as shown to left side panel (B) by rotating large cam locks (3)1/2-turn clockwise using a Phillips head screwdriver (not included).
STEP 7:STEP 7:STEP 7:STEP 7:
1 4 PCS
3 2 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert large wood dowels (1) into left side panel (B).Insert large cam locks (3) into back top rail (H) and front top rail (G).Attach back top rail (H) and front top rail (G) to left side panel (B) by rotating large camlocks (3) 1/2-turn clockwise using a Phillips head screwdriver (not included).
STEP 8:STEP 8:STEP 8:STEP 8:
1 13 PCS
3 8 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert large wood dowels (1) and large cam locks (3) into rails (G, H, I, J & K) and fixed shelf(D).Secure the right side panel (C) to the assembled unit by rotating large cam locks (3) 1/2-turn clockwise using a Phillips head screwdriver (not included).
STEP 9:STEP 9:STEP 9:STEP 9:
1 8 PCS 4 14 PCS
3 14 PCS 11 2 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert large cam bolts (4) into top panel (A) as shown.Insert large wood dowels (1) into left side panel (B), upper stand panels (E) and right side panel(C).Insert large cam locks (3) into side panels (B & C), upper stand panels (E), back top rail (H) andfront top rail (G).Fasten top panel (A) to the assembled unit by rotating large cam locks (3) 1/2-turn clockwiseusing a Phillips head screwdriver (not included).Attach support panel (L) to lower stand panel (F) with bolts (11). Use Allen key (12) to tightenthe bolts.
STEP 10:STEP 10:STEP 10:STEP 10:
9 36 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Attach back panels (M) to the assembled unit with round head screws (9).Use a Phillips head screwdriver (not included) to tighten the screws.
STEP 11:STEP 11:STEP 11:STEP 11:
10 16 PCS 2 16 PCS
8 8 PCS 5 16 PCS
6 16 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert small cam bolts (6) and small wood dowels (2) into large front drawer panel (N).Insert small cam locks (5) into large left drawer side (O) and large right drawer side (P).Attach large drawer sides (O & P) to large front drawer panel (N).Secure the drawer sides by rotating small cam locks (5) 1/2-turn clockwise.Slide the large drawer bottom (R) into the grooves of large drawer sides (O & P) and large front drawer panel(N).Attach large drawer back (Q) to large drawer sides (O & P) with flat head screws (10).Use a Phillips head screwdriver (not included) to tighten screws.Attach handle (7) to small front drawer panel (S) with short bolts (8) and a Phillips head screwdriver (notincluded).Repeat this step to assemble the other large drawers.
4 PCS7
STEP 12:STEP 12:STEP 12:STEP 12:
10 12 PCS 2 12 PCS
8 6 PCS 5 12 PCS
6 12 PCS
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert small cam bolts (6) and small wood dowels (2) into small front drawer panel (S).Insert small cam locks (5) into small left drawer side (T) and small right drawer side (U).Attach small drawer sides (T & U) to small front drawer panel (S) and secure by rotating small cam locks (5) 1/2-turnclockwise.Slide the small drawer bottom (W) into the grooves of small drawer sides (T & U) and small front drawer panel (S).Attach small drawer back (V) to small drawer sides (T & U) with flat head screws (10) and a Phillips head screwdriver(not included).Attach handle (7) to small front drawer panel (S) with short bolts (8) and a Phillips head screwdriver (not included).Repeat this step to assemble the other small drawers.
7 3 PCS
STEP 13:STEP 13:STEP 13:STEP 13:
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Insert all drawers into the assembled unit.
That's it! You've finished assembling your Dresser!
Dorel Asia is an authorized licensee of Eddie Bauer Licensing Services LLC. Eddie Bauer® and the Eddie Bauerlogos are the registered trademarks of Eddie Bauer Licensing Services LLC.
CAUTIONCAUTIONCAUTIONCAUTION: "This unit is intended for use only with theproducts and/or maximum weights indicated. Use with otherproducts and/or products heavier than the maximum weightsindicated may result in instability or cause possible injury."
Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser
DA6504-1DA6504-1DA6504-1DA6504-1
Themaximumweight is30lbs
DO DO DO DO NOTNOTNOTNOT RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE.If a part is missing or damaged, contact our customer service
department. We will replace the part FREEFREEFREEFREE of charge.
Tel #: 1-800-295-1980E-Mail: das@dorel.comFax #: 514-353-7819
Maximumweight perdrawer 15lbs
Furniture Wall Safety StrapFurniture Wall Safety StrapFurniture Wall Safety StrapFurniture Wall Safety Strap1 2 3 4 5
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED. TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED. TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED. TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED. NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED. NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED. NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASEFUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASEFUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASEFUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.
Step 7:Step 7:Step 7:Step 7:
Step 1:Step 1:Step 1:Step 1:
Step 2:Step 2:Step 2:Step 2:
Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).
Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),screw holes approximately 2" below the brackets mounted to the edge of the furniture.screw holes approximately 2" below the brackets mounted to the edge of the furniture.screw holes approximately 2" below the brackets mounted to the edge of the furniture.screw holes approximately 2" below the brackets mounted to the edge of the furniture.
Step 5:Step 5:Step 5:Step 5:
Step 6:Step 6:Step 6:Step 6:
SAFETY WALL STRAP2 PCS
WALL ANCHOR2 PCS
MOUNTING BRACKET4 PCS
SHORT SCREW2 PCS
LONG SCREW2 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITUREWARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITUREWARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITUREWARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITUREMAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHINDMAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHINDMAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHINDMAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHINDTHE FURNITURE TO ENSURE SAFETY.THE FURNITURE TO ENSURE SAFETY.THE FURNITURE TO ENSURE SAFETY.THE FURNITURE TO ENSURE SAFETY.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THETO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THETO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THETO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THELONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.LONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.LONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.LONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
Check to make sure the straps (1) is securely laced and locked to the brackets (3).Check to make sure the straps (1) is securely laced and locked to the brackets (3).Check to make sure the straps (1) is securely laced and locked to the brackets (3).Check to make sure the straps (1) is securely laced and locked to the brackets (3).
Drill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flangeDrill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flangeDrill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flangeDrill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flangeon the anchors is against the wall surface.on the anchors is against the wall surface.on the anchors is against the wall surface.on the anchors is against the wall surface.
Position the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach thePosition the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach thePosition the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach thePosition the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach thebrackets (3) to the wall.brackets (3) to the wall.brackets (3) to the wall.brackets (3) to the wall.
Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.
Lace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together andLace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together andLace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together andLace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together andslide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pullslide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pullslide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pullslide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pulldown on the beaded end until it snap locks into the keyhole slot.down on the beaded end until it snap locks into the keyhole slot.down on the beaded end until it snap locks into the keyhole slot.down on the beaded end until it snap locks into the keyhole slot.
To double lock return the beaded end back through the keyholes as shown.To double lock return the beaded end back through the keyholes as shown.To double lock return the beaded end back through the keyholes as shown.To double lock return the beaded end back through the keyholes as shown.
Step 8:Step 8:Step 8:Step 8:
Step 3:Step 3:Step 3:Step 3:
Step 4:Step 4:Step 4:Step 4:
MODEL #: DA6504-1MODEL #: DA6504-1MODEL #: DA6504-1MODEL #: DA6504-1
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer ServiceCustomer ServiceCustomer ServiceCustomer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: das@dorel.comCustomer Service Phone Number 1-800-295-1980
Recommended