View
74
Download
6
Category
Preview:
DESCRIPTION
CSUnitechttp://www.csunitec.com/spanish/concretesaws/sierra.html
Citation preview
Portable Saws & AccessoriesPortable Saws & AccessoriesHeavy-duty Saws… Fast, accurate cutting on the job site!
SPEC
IAL
FEA
TURE
S A
ND
BEN
EFIT
S
2 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
CS Unitec's portable saws and tools are ideal for cutting pipe, structural steel, tanks,bolts, angle iron, concrete and other materials, including plastic and wood. We offerthe widest range of portable pneumatic, electric and hydraulic saws in the industry.
Our saws can be used as hand-held tools or with an assortment of clamps for pipeand other materials. All CS Unitec saws are heavy-duty for use in industry andconstruction. Our complete saw line includes pneumatic-, electric- and hydraulic-powered tools, saw blades and accessories, all available for prompt delivery.
CS Unitec is the industry leader in:• Portable saws for cutting pipe, metal, concrete, etc.• Compact, lightweight, hand-held and clamp-mounted saws• The best power-to-weight ratios• Long-lasting, heavy-duty saw blades for fast cutting of steel, stainless steel,
Inconel, chrome, Hastelloy, aluminum, iron, plastics, masonry, concrete andother materials
We offer:• Pneumatic-, electric- and hydraulic-powered saws• Clamps for 90˚ cutting of pipe, structural steel and other materials• Compact sizes for sawing in confined spaces
Tool and Accessory Index:
Portable Band Saws p. 18-21Pneumatic
4 3/4" capacity p. 197" capacity p. 19
Electric4 3/4" capacity p. 207" capacity p. 20
Hydraulic4 3/4" capacity p. 207" capacity p. 20
Band Saw Blades and Accessories p. 21
Portable Reciprocating Saws p. 4-13Pneumatic – Low Air Volume
PL905 (for high-volume production environments) p. 5CL50/CL75 (for demanding maintenance apps.) p. 6JP901 (for fiberglass and sheet metal production) p. 7
Pneumatic1.3 HP – The CAT p. 101.6 HP – The WOLF p. 11
Hydraulic2 HP – The SHARK p. 12
Electric - The FOX9.5 Amp, 12 Amp p. 12
Reciprocating Saw Blades p. 13
Nibblers p. 30
AirPac p. 29
Lubricants p. 29, 31
Warranty p. 31
Concrete Saws p. 24-28Chain Saws
Pneumatic p. 24-25Hydraulic p. 24-25Accessories p. 26About Diamond Chain Life p. 27
Cut-off14" and 18" Pneumatic Hand-held p. 2820" Pneumatic Walk-behind p. 28
Chain Saws p. 22-234 HP Pneumatic p. 221.2 HP Pneumatic p. 23Saw Chains and Accessories p. 23
Portable Hacksaws p. 14-17Pneumatic, Electric & Hydraulic p. 14-15Hacksaw Accessories p. 16Hacksaw Blades p. 17
Selected air andhydraulic models in our line are ATEXCertified for working in Ex Zones. Contact us for more information.
ATEX CertifiedATEX Certified
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Choose your Power…
Choose your Cutting Method…
Pneumatic-powered Saws• ATEX Certified for
use in hazardous areas (selected models)
• Reliable and require less maintenance• High power-to-weight ratios
Electric-powered Saws• Ideal for heavy-duty cutting applications
in industry and construction• Simple and easy to use• Available in 110 Volt/60Hz or 220 Volt/50Hz
Track-mountedWe offer a variety of clampsfor applications that requirethe saw to be stable.
Hand-heldWe lead the industry in ruggedportable saws that are ideal forfree-hand cutting applications.
90˚ with Pipe ClampsOur portable saws are ideal forright-angle cutting of pipe andstructural steel using chainclamps or vise-on clamps.
Choose your Heavy-duty Blades and Chains…
Heavy-duty Thick90˚ cutting with a clamp is easywhen you use our heavy-dutythick blades.
Chains and BladesWe offer diamond chains, carbidechains and chisel chains, as wellas diamond saw blades, for a widevariety of sawing applications.
Special Features and BenefitsSpecial Features and Benefits
SPEC
IAL
FEA
TURE
S A
ND
BEN
EFIT
S
3
ReciprocatingOur extensive blade lineincludes a complete range ofblades for reciprocating saws.
Hydraulic-powered Saws• Utilized for special cutting
situations, such as underwater• Ideal for professional sawing
and drilling applications wherehydraulic power is the norm
• ATEX Certified (selectedmodels)
ATEX CertifiedATEX Certified
REC
IPRO
CA
TIN
GSA
WS
4 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Reciprocating Air SawsReciprocating Air Saws
PL Saws - For High-volumeProduction Environments p. 5
CL Saws - For DemandingMaintenance Applications p. 6
JP Saws - For Fiberglassand Sheet Metal Production p. 7
Cengar Air Saw Blades
HB300/18HB300/24HB300/32MC220/24MYN150/18MYT150/18
HandHandHandMachineNotched YellowTapered Yellow
18 TPI24 TPI32 TPI24 TPI18 TPI18 TPI
12" L12" L12" L81/2" L6" L6" L
1/2" Wide Bi-metal Blades (for CL50, JP901 and PL905)
MB150/18MB200/10-14MB200/18MB200/24MB250/18MB250/24MB300/10-14MB300/18
MachineMachineMachineMachineMachineMachineMachineMachine
18 TPI10/14 TPI18 TPI24 TPI18 TPI24 TPI10/14 TPI18 TPI
6" L8" L8" L8" L10" L10" L12" L12" L
3/4" Wide Bi-metal Blades (for CL75)
Compact, Quiet & ReliableLow Vibration/Low Air VolumeCut Pipe, Structural Steel, Sheet
Metal, Fiberglass, Plastic and More.
• Piston air motors use low air volume (CFM)while maintaining a fast cutting speed (2000to 10,000 strokes per minute)
• Safe around gas and other flammablematerials; recommended for fire and rescueapplications where high CFM isn't available
• ATEX Certified – for use in hazardous areas• CL and PL saws use standard hand hacksaw
blades; convert to a 3/4" blade size simply bychanging the nosepiece
• Rugged saw bodies constructed of heavy-duty cast steel and aluminum
• Built-in lubrication system automaticallylubricates the motor
• Safety STOP/Isolator button disconnectsair supply
Lubricating Oils (see p. 29)• ProLube™ is a super-premium, low-viscosity
synthetic air tool lubricant
• ProLube-ATL/AF is a special blend preventingfreezing in cold climate conditions
MS Cleaner (MS 9105)• An ideal conditioner for air tools used underwater
ATEX CertifiedATEX Certified
ECO32-T and ECO32-TAKECO32-T and ECO32-TAKReversible motor for drilling and tapping applications
Cuttercapacity 11/4" dia.
REC
IPRO
CA
TIN
G S
AW
S
5• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Reciprocating Air SawsReciprocating Air SawsIdeal for cutting pipe, metals, fiberglass and more
Motor PowerStroke LengthStrokes per Min.WeightLength x Height x WidthAir ConsumptionAir PressureAir ConnectionAir HoseNoise Level (dB)Vibration Level (m/s2)
1 HP7/8"
20005 1/4 lbs.
113/4" x 51/4" x 15/8"4 CFM90 PSI
1/4" NPT1/4" ID
691.73
Model PL905
Low Vibration • Low Noise• Ideal for high-volume production applications
such as cutting steel, repairing wooden pallets,building and repairing truck bodies and cuttingfiberglass
• Also widely used by oil and gas contractors andfire rescue services
• Sturdy cast steel and aluminum saw body
• Low air volume – only 4 CFM
• 7/8" blade stroke, up to2000 strokes per minute
• Fitted with easy-to-useSTOP/Isolator button onthe handle for safety whenchanging blades
• Uses any 1/2" (12mm) wideBi-metal hand, machine oryellow blades
Model PL905Sturdy air saw for continuous use
Standard Equipment:carrying case, fiveMC220/24 saw blades,air tool oil, CD operatingmanual, allen key.
Cengar Saw Blades and Accessories (see page 4)
• 1/2" wide Bi-metal Blades suit a wide range of applications
ATEX CertifiedATEX Certified
Cut Sheet Metal
Cut Nails
REC
IPRO
CA
TIN
G S
AW
S
6 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Reciprocating Air SawsReciprocating Air SawsIdeal for cutting metal, timber and fiberglass
Low Vibration • Low Noise• Workhorses for use in the fabrication,
shipbuilding, ship repair, oil andpetrochemical, boat building andaircraft maintenance fields
• Also utilized by fire and rescueprofessionals
• 13/4" blade stroke, up to 1200 strokesper minute
• Fitted with easy-to-use STOP/Isolatorbutton on the handle for safety whenchanging blades
• CL50 uses any 1/2" (12mm) wide Bi-metal hand or machine blade andcan be easily converted to a CL75 bychanging the nosepiece
• CL75 uses a 3/4" (19mm) wide Bi-metal machine blade
Standard Equipment: carrying case, five MC220/24 saw blades, air tool oil,CD operating manual, allen key.
Motor PowerStroke LengthStrokes per Min.WeightLength x Height x WidthAir ConsumptionAir PressureAir ConnectionAir HoseNoise Level (dB)Vibration Level (m/s2)
1 HP1 3/4"1200
51/2 lbs.153/4" x 51/4" x 15/8"
53/4 CFM90 PSI
1/4" NPT1/4" ID
833.69
Models CL50 & CL75
Models CL50 & CL75Rugged air saws for versatile applications
ATEX CertifiedATEX Certified
Cengar Saw Blades and Accessories (see page 4)
• 1/2" and 3/4" wide Bi-metal Blades suit a widerange of applications
• To fit our 3/4" Bi-metal blades, order 3/4"nosepiece – Part. No. 5075
ECO32-T and ECO32-TAKECO32-T and ECO32-TAKReversible motor for drilling and tapping applications
Cuttercapacity 11/4" dia.
REC
IPRO
CA
TIN
G S
AW
S
7• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Reciprocating Air SawsReciprocating Air SawsIdeal for cutting fiberglass, light-gauge metal & fiberboard
Low Vibration • Low Noise• Ideal for cutting fiberglass,
light-gauge metal and fiberboard up to 3/8" (10mm) thick
• Utilized by boat builders and in theconstruction and repair of car, bus and truck bodies
• Low air consumption – only 4 CFM
• 3/8" blade stroke, up to 10,000 strokesper minute
• Has automatic lubrication and an easy-to-use STOP/Isolator button on thehandle for safety when changing blades
• JP901 uses any 1/2" (12mm) wide Bi-metal hand, machine or yellowblades and can be easily converted to use 3/4" blades by simply changingthe nosepiece
Standard Equipment: carrying case, five MYN150/18saw blades, five MYT150/18 saw blades, air tool oil,CD operating manual, allen key.
Motor PowerStroke LengthStrokes per Min.WeightLength x Height x WidthAir ConsumptionAir PressureAir ConnectionAir HoseNoise Level (dB)Vibration Level (m/s2)
1 HP3/8"
10,00031/2 lbs.
103/4" x 23/4" x 15/8"4 CFM75 PSI
1/4" NPT1/4" ID
691.23
Model JP901
Model JP901Speedy, lightweight air saw for repair and construction environments
ATEX CertifiedATEX Certified
Cengar Saw Blades and Accessories (see page 4)
• 1/2" and 3/4" wide Bi-metal Blades suit a widerange of applications
• To fit our 3/4" Bi-metal blades, order 3/4"nosepiece – Part. No. 5075
REC
IPRO
CA
TIN
G S
AW
S
8
Portable Reciprocating SawsPortable Reciprocating Saws
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
The most powerfulin the industry!
Hand-held or clamp-on cuttingin tough environments
Pneumatic • Hydraulic • Electric Ideal for a wide range of industries,
including subsea, gas utilities,offshore oil, petrochemical, power
generation, industrial plantmaintenance and construction
• Fast cutting of pipe, structural steel,bolts, nails, pallets and other material
• The best power-to-weight ratios in the industry
• Compact size allows cutting inconfined spaces
• ANC gear drive reduces friction andincreases gear life and power output
• Cut steel pipe and channel up to 6" dia. (or plastic pipe up to 8" dia.)
• 90˚ cuts with optional clamps
The CAT - 1.3 HP PneumaticReciprocating Saw p. 10
The WOLF - 1.6 HP PneumaticReciprocating Saw p. 11
The SHARK - 2 HP HydraulicReciprocating Saw p. 12
Pipe Clamps for 90˚ CuttingCut faster by increasing
your leverage 5xwhile safely
securing thesaw with our
Pipe Clamps.
Pipe Clamp for Pipes & Profiles
1/2" - 2" Pipe Vise Clamp – Model No. 259.9832 1/2" - 4" Pipe Vise Clamp – Model No. 563.1001/2" - 6" Pipe Chain Clamp – Model No. 251.259
The FOX - 9.5 and 12 AmpElectric Reciprocating Saws p. 12
Two Models:Spade (below) or D-handle(right) available.
90˚Model No. CP1 Universal Clamp• Easily attaches to recip saws and
portable hacksaws for 90˚ cuts intight spaces
• Self-aligning feet adjust tothe form of the workpiece(round, square and angled)
• 1/2" to 6" capacity with recipsaws – see page 16 for usewith portable hacksaws
ATEX CertifiedATEX Certified
REC
IPRO
CA
TIN
G S
AW
S
9• 1-800-700-5919 • Visit our Web site at www.csunitec.com
The New Generation Gear HeadANC = All-round Needle-bearing Crank Drive
Reciprocating SawsReciprocating Saws
ANC Gear Drive: Low Friction • High TorqueThe new, unique design of the ANC gear:
• reduces friction and wear, resulting in lessheat and longer service life.
• resists dust and water, making the gear headmaintenance free.
• allows for aggressive high-torque cutting,providing good chip flow and long blade life.
CS Unitec's reciprocating saws cut faster and last longerthan other saws in their class.The ANC gear drive and heavy-duty air or electric motor provide the best power-to-weight ratio in the industry.
ANC geardrive
Ergonomicallyshaped
housing grip
Universal 1/2" tang, double-tang or M-Tooth blade moves in aggressive orbital action
Patentedsaw blade
mount
Patentedsquare lift rod
Powerful, heavy-duty pneumatic
or electric motor
Siliconegasket
Pipeclamp
connection
Reciprocating Saw Blades
Extremely versatile, CS Unitec'sreciprocating saws use the universal 1/2" tang or special double-tang saw blades (see page 13).Our extra-thick saw blades resist bending and cut pipe at right angleswith a pipe clamp.
In addition, CS Unitec's Mega SharpM-Tooth saw blades (see page 13) have a unique, patented tooth geometry that allows these blades to cut quickly with each stroke,forward and back, saving timeand money.
Standard BladesAll CS Unitec reciprocating saws can usethe widely available standard reciprocatingblades with the 1/2" universal tang.
Heavy-duty BladesThese blades are much thicker thanstandard blades and have a strongerdouble-tang mount for heavy-dutycutting, either free-hand or with a clamp.
M-Tooth BladesUnique tooth geometry allowsthese blades to cut in bothdirections – twice as fast!
Cut inBoth Directions!
REC
IPRO
CA
TIN
G S
AW
S
10 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
1.3 HP Pneumatic Reciprocating Saw1.3 HP Pneumatic Reciprocating SawIdeal for cutting pipes, structural steel, pallets and more
Saw Kit (5 1217 0060)includes saw, 6" pipe clamp,case and five No. 1001heavy-duty blades.
Model 5 1217 0020 includes carrying caseand two No. 1001 heavy-duty blades.
Reciprocating Saw Blades and Accessories (see page 13)
• Universal saw blades
• Thicker, heavy-duty double-tang blades for 90˚ cuts
• M-Tooth blades to cut onforward and back stroke
Motor PowerStroke LengthStrokes per Min.WeightLengthAir ConsumptionAir PressureAir ConnectionSaw Kit
1.3 HP1 1/8"
0-18009 lbs.15 7/8"
46 CFM90 PSI
1/2" NPT (ID)Order Model 5 1217 0060
Model 5 1217 0020
Model 5 1217 0020Use hand-held or with a clamp
TheCAT
Pipe Clamps for Straight Cutting up to 6" dia.• Increase leverage
5x for faster cutting
• Safely secure thesaw while cutting
• Cuts steel pipe and channel 1/2" to 4" dia., plasticpipe to 8" dia.
• Ideal for the toughest use in refineries, chemicalplants, gas utilities, construction, offshore oil,mining, marine and demolition industries
• 1.3 HP air motor provides more power thanconventional air saws
• 11/8" blade stroke for fast, efficient cutting
• Can be mounted on a pipe clamp to make 90˚ cuts
• Variable speed of 0-1800 strokes per minute
• Accepts universal saw blades or thicker, heavy-duty double-tang saw blades (see page 13)
• Molded rubber boot for ergonomic grip
• One-year warranty
ATEX CertifiedATEX Certified
ECO32-T and ECO32-TAKECO32-T and ECO32-TAKReversible motor for drilling and tapping applications
Cuttercapacity 11/4" dia.
REC
IPRO
CA
TIN
G S
AW
S
11• 1-800-700-5919 • Visit our Web site at www.csunitec.com
1.6 HP Pneumatic Reciprocating Saw1.6 HP Pneumatic Reciprocating SawIdeal for cutting pipe, structural steel and other materials
• Cuts steel pipe and channel 1/2" to 6" dia., plastic pipeto 8" dia.
• Powerful 1.6 HP motor with reciprocating action for steel and long orbital stroke for cutting soft materialsincluding wood, plastic and aluminum
• Can be mounted on a pipe clamp to make 90˚ cuts
• 11/8" blade stroke for fast, efficient cutting
• Selector switch changes stroke setting to eitherstraight or orbital
• Variable speed from 0-2200 strokes per minute
• Accepts universal saw bladesor thicker, heavy-duty double-tang saw blades (see page 13)
• Molded rubber boot for ergonomic grip; sidehandle included
• One-year warranty
Saw Kit (5 6005 0060) includes saw, 6" pipeclamp, case, side handle and five No. 1001 heavy-duty blades.
Motor PowerStroke LengthStrokes per Min.WeightLengthAir ConsumptionAir PressureAir ConnectionSaw Kit
1.6 HP1 1/8"
0-220010 3/4 lbs.
17 3/4" 51 CFM90 PSI
1/2" NPT (ID)Order Model 5 6005 0060
Model 5 6005 0010
TheWOLF
Pipe Clamps for Straight Cutting up to 6" dia.• Increase leverage
5x for faster cutting
• Safely secure thesaw while cutting
Model 5 6005 0010Use hand-held or with a clamp
Reciprocating Saw Blades and Accessories (see page 13)
• Universal saw blades
• Thicker, heavy-duty double-tang blades for 90˚ cuts
• M-Tooth blades to cut onforward and back stroke
Shown with side handle
Selector switch forstraight or orbital stroke
ECO50-T and ECO50-TAKECO50-T and ECO50-TAKReversible motor for drilling and tapping applications
Cuttercapacity 2" dia.
REC
IPRO
CA
TIN
G S
AW
S
12 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Subsea, mining, utility and construction applications
The FOXmini hacksaws –
industry's most powerfulelectric recip saws!
Single Speed5 6002 0000Variable Speed5 6002 6000**5 6002 7000**
* 220 Volt also available ** 5 6002 6000 with speed control dial, 5 6002 7000 with variable-speed trigger.
9.5 Amp, 110V*
12 Amp, 110V*
9.5 Amp, 110V*
Power
2200
0-2200
0-2200
Strokesper Min.
StrokeLength
11/8"
11/8"
11/8"
Spade
Spade
D-handle
19"
19"
19"
Handle Style
6
6
6
Length Weight(lbs.)Model No.
Model 5 6002 7000 with D-handle variable-speed trigger.
Models 5 6002 0000 and 5 6002 6000with spade handle. Model 5 6002 6000has variable-speedcontrol dial.
Hydraulic Reciprocating SawHydraulic Reciprocating Saw
• Cut steel pipe and channel 1/2" to 4" dia., plastic pipe to 8" dia.
• Powerful 9.5 and 12 Amp motors,110 Volt/60Hz (or 220 Volt/50Hz)
• Ideal for plumbing and electricalcontractors as well as demolitionjobs, pallet cutting and more
• 11/8" blade stroke for fast cutting
• 0-2200 variable stroke speed for models 5 6002 6000 and 5 6002 7000
Reciprocating Saw Blades and Accessories (see page 13)
• Universal saw blades
• Thicker, heavy-duty double-tang blades for 90˚ cuts
• M-Tooth blades to cut onforward and back stroke
Standardequipmentincludes 2"pipe clamp(#259.983),
carrying caseand two No.1001 blades
Accept universalsaw blades orthicker, heavy-
duty double-tangsaw blades (see
page 13)
Motor PowerOil PressureOil FlowStrokes per Min.WeightHydraulic ConnectionHose ID*
* Hoses are not included
2 HP2000 PSI
6 GPM (up to 13)1700
13.2 lbs.M 18 x 1.5 Male
1/2" ID with 1/2" FF Couplings
Model 5 1219 0010
• Marine, mining, utility andconstruction applications
• Operate on 2000 PSI / 6 GPM(up to 13 GPM) hydraulic oil
• Cut wood up to 6" dia., metalup to 3/4" dia.
Model 5 1219 0010Use hand-held or with a clamp
Electric Reciprocating SawElectric Reciprocating Saw
The SHARK
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
REC
IPRO
CA
TIN
G S
AW
BLA
DES
13
Reciprocating Saw BladesReciprocating Saw BladesSuper quick and precise for pipe, steel, plastic, etc.**Use ProLube™ Specialty Lubricants with your Reciprocating Saw Blades to help your
tools work cooler, longer and more efficiently. ProLube Lubricants are non-toxic andideal for stainless steel and hard metal cutting applications. See page 31 for details.**
No. 1001No. 1002No. 007D/200** 007D/200 has universal 1/2" tang • Ask for special blades to cut stainless steel.
Cuts pipe up to 2"Cuts pipe up to 4"Cuts pipe up to 4"
8 TPI8 TPIM-Tooth
6" L x 1" W x .060" T8" L x 1" W x .060" T8" L x 1" W x .050" T
Extra-thick Blades for 90˚ Cutting with a Pipe Clamp, Double Shank*
General-purpose Bi-metal Saw Blades with Universal 1/2" Shank
No. 007/150No. 007/200No. 007/280
Metal 1/8" and ThickerM-ToothM-ToothM-Tooth
6" L x 3/4" W x .035" T8" L x 3/4" W x .035" T12" L x 3/4" W x .035" T
No. 006/150No. 006/250
Metal up to 1/8" ThickM-ToothM-Tooth
6" L x 3/4" W x .035" T7" L x 3/4" W x .035" T
Cast Steel, Ductile Iron, Ceramics and Glass Fiber ProductsNo. D12/200 Tungsten Carbide Coarse 8" L x 3/4" W
No. 1005No. 1003No. 1004
10/14 TPI10/14 TPI10/14 TPI
6" L x 1" W x .035" T8" L x 1" W x .035" T12" L x 1" W x .035" T
Heavy-duty HSS-Bi-metal Blades for Freehand Sawing, Double Shank
Made of tough, resilient steel with 10/14 variable tooth pitch. The large blade width and double-shank mountdeliver excellent cutting performance and durability.
Mega Sharp M-Tooth Saw Blades for Freehand Cutting with Standard 1/2" Shank
CUTS TWICE AS FAST!M42 Bi-metal for cutting steel and stainless steel
The patented M-Tooth sawblade cuts 2x faster than ordinaryblades. The teeth are designedto cut on the forward and backstrokes, thereby saving time.
Cuts inBoth Directions!
No. 3013/150No. 3013/200No. 3018/280
Metal 1/8" and Thicker14 TPI14 TPI10 TPI
6" L x 3/4" W x .035" T8" L x 3/4" W x .035" T12" L x 3/4" W x .035" T
No. 3021/150No. 3021/225No. 3021/300
Plastic, Wood, Plasterboard6 TPI6 TPI6 TPI
6" L x 3/4" W x .035" T8" L x 3/4" W x .035" T12" L x 3/4" W x .035" T
No. 810C/150No. 810C/225
All Woods with Steel (i.e. Embedded Nails)8/10 TPI8/10 TPI
6" L x 3/4" W x .035" T9" L x 3/4" W x .035" T
Metal up to 1/8" ThickNo. 3014/150 18 TPI 6" L x 3/4" W x .035" T
Metal up to 1/8" Thick (for Curved Cuts)No. 3017/90 18 TPI 35/8" L x 5/16" W x .035" T
PORT
ABL
E H
AC
KSA
WS
14 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Portable Hacksaws for Tough DutyPortable Hacksaws for Tough DutyOn-site cutting of pipe up to 24" OD and structural steel
Pneumatic • Electric • HydraulicCS Unitec's power hacksaws offer a wide rangeof options for portable cutting of pipe, structuralsteel, tanks and other materials. Our saws aredesigned for the toughest service in refineries,power plants, utilities, offshore oil, constructionand demolition applications and are ideal forshutdowns and turnarounds in process pipingindustries. CS Unitec's pneumatic saws aresafer than cutting with a welding torch inhazardous areas or confined spaces.
• Compact size, ideal for cutting in confined spaces• 2 3/8" blade stroke• Pipe clamps for 90˚ cutting of up to 24" OD pipe• Profile clamps for structural steel• Wide variety of blades and accessories for
cutting steel, stainless steel, aluminum, plastic,wood and ductile iron
• Optional blade guide to ensure right-angle cuts• Automatically cut pipe with our optional self-
feeding, pneumatic-powered pipe clamp system
Heavy-duty sawblades from 8"to 37" long
HSS, HSS-SL,carbide-coatedand Diamond-coated bladesavailable
Pneumatic, electricor hydraulic motor
Twist or lever throttle
Optional saw blade guidefor added blade stability –ensures straight cutting!
Two sizes available (Not required)
Assorted pipe clampsfor pipes up to 24"OD or profile clampsfor structural steel
Manual or automatic feed
Pneumatic:3/4" NPT ConnectionElectric:110 Volt (220V available)Hydraulic:1/2" FF (HTMA) Couplings
PORT
ABL
E H
AC
KSAW
S
15• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Portable Power HacksawsPortable Power HacksawsAir, Electric and Hydraulic for cutting pipe and steel
Model 5 1215 0070with variable speedElectric
Model 5 1220 0050Hydraulic
Model 5 1212 0050 with lever throttlePneumatic
3/4" NPT Air Connection
11 Amps / 110 Volt (220 Volt Available)
1/2" FF Couplings
• HSS (High-speed Steel), HSS-SL (forstainless steel and hard metal), CarbideCoated and Diamond Coated
Accessory Saw Blades(see page 17)
Pneumatic - 3/4" ID NPT Air Connection5 1212 00105 1212 0050Electric - 11 Amps / 110 Volt**5 1215 0070*Hydraulic - 1/2" FF (HTMA) Couplings5 1220 0050
* Model 5 1215 0070 has an electronic speed control dial. **Also available as 220 Volt/50 Hz
1.5 HP
1.5 HP
1.5 HP
3.8 HP
Power
Roll
Lever
Trigger
Lever
Air Consumption: 51 CFM
Air Pressure: 90 PSI
110V/60 Hz (220V/50Hz is available)
Oil Flow: 4 GPM at 2000 PSI
Throttle Motor Specifications
2 3/8"
2 3/8"
2 3/8"
2 3/8"
BladeStroke
15.4
15.4
13
13.5
Weight(lbs.)
100-350
100-350
200-400
100-500
Strokesper Min.
1/2" ID1/2" ID
Cable
1/2" ID
HoseModel
No.
• Pneumatic, electric or hydraulic motor withvariable speeds
• Ideal for cutting pipe, tanks, structural steel,profiles and other materials
• Designed for the toughestservice in refineries, chemicalplants, utilities, pipelines,construction, offshore oil anddemolition applications
• Cut pipe up to 24" OD in one pass
• Chain clamps and profile clamps available foraccurate 90˚ cutting of pipe and structural steel
• 2 3/8" stroke for heavy-duty cutting
• Ideal for cutting in confined spaces
• Accommodate heavy-duty blades up to 37" long
• Optional saw blade guides to increaseblade stability
• Pneumatic pipe clamp system available forautomatically cutting pipe; easily attaches topneumatic hacksaw and shares same air supply(see accessory No. 5 1208 9980 on page 16)
• One-year warranty
Throttle Types for Pneumatic Saws:Roll Throttle (pneumatic model 5 1212 0010 only) – is used only with automatic feed pipe clamp (see page 16)
Lever Throttle (model 5 1212 0050) –provides on/off paddle switch for manual cutting with clamp
Pipe Capacity24" OD
Profile Capacity21 3/4" h x 11 1/2" w
ATEX CertifiedATEX Certified
ATEX CertifiedATEX Certified
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
HA
CKS
AW
AC
CES
SORI
ES
16
Hacksaw AccessoriesHacksaw Accessories
Model No. 5 1208 9980 – Automatic Clamp
• Save time and effort by automatically cuttingpipe up to 12 3/4" OD (up to 24" OD withextension chain)
• Self-feeding device savesoperator time and makes work easier
• Easily attaches to CS Unitec air hacksawand shares same 90 PSI air supply (Pipeclamp for use only with CS Unitec airhacksaw Model No. 5 1212 0010)
• Blade guide is optional (see page 17)
Model No. CP1 – Universal Clamp
• Self-aligning feet adjust to the form of theworkpiece (round, square and angled)
• Accommodates 1/2" to 123/4" OD [up to 24" ODwith extension chain no. CP1/10 (39-3/8" long)]
• CP1 easily attaches to most of ourreciprocating saws for 90˚ cuts in tight spaces
Extension Chains for Pipe ClampsExtension Chains for Pipe Clamps• Extend capacity of pipe clamps up to 24" ODModel No. 5 1201 9010 – 17 3/4" chain extensionModel No. 5 1201 9030 – 39 3/8" chain extension(allows pipe clamp Nos. 5 1202 9960 and 5 1208 9940 to fit 24" OD pipe)
Model No. 5 1207 99102" to 6" OD pipe clamp
Model No. 5 1202 99604" to 12 3/4" OD pipe clamp(up to 24" OD with extensionchain shown below)
Model No. 5 1207 897021 5/8" x 11 3/8" profile clamp
Clamps for Pipes and ProfilesClamps for Pipes and ProfilesEnsure 90˚ cuts through pipe and profiles
Clamps for Pipes and ProfilesClamps for Pipes and Profiles
Large Pipe Clamp,Model 5 1202 9960
Small PipeClamp,Model5 1207 9910
Up to 6"pipe dia.
Profile Clamp,Model 5 1207 8970
Automatic Feed Pipe Clamp for Pneumatic SawsAutomatic Feed Pipe Clamp for Pneumatic Saws
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
HA
CKS
AW
BLA
DES
17
Hacksaw BladesHacksaw Blades - 8" up to 37" long
Z22-9 HSSZ22-10 HSSZ22-11 HSS
Z22-6 HSSZ22-6 HSS-SL*Z22-6 CarbideZ22-31 HSSZ22-71 HSS
Z22-83 DSB
Z22-7 HSSZ22-7 CarbideZ22-29 HSSZ22-32 WSZ22-33 HSS
Z22-86 DSB
Z22-72 HSSZ22-72 Carbide
Z22-30 HSSZ22-30 HSS-SL*Z22-40 HSS
Z22-73 HSSZ22-73 CarbideZ22-74 HSS
Z22-75 HSSZ22-75 HSS-SL*
Z22-37 HSS
Heavy-duty cutting of pipe and structural steel
*Use HSS-SL Blades for best cuttingperformance on stainless steel and hard metal.
HSS or HSS-SL Saw Blade Shown
Order No. Steel andNonferrous Metal
Plasticand Wood
Ductile/Cast Ironand Masonry
Max. Dia.of Cut
DimensionsLength Teeth/Inch Thickness
8"8"8"
12"12"12"12"12"
12"
16"16"16"16"16"
19"
20"20"
21"21"21"
24"24"24"
30"30"
37"
81624
1616
Coated124
Coated
1616846
Coated
14Coated
12124
14Coated
8
1212
12
Steel/AluminumSteel
Sheet Metal
SteelStainless Steel
–Steel
–
–
Steel–
Steel/Aluminum–
Cast Iron
–
Steel–
SteelStainless Steel
–
Steel–
Steel/Aluminum
SteelStainless Steel
Steel
Plastics––
––––
Plastics/Wood
–
––
PlasticsPlastics/Wood
Plastics
–
––
––
Plastics/Wood
––
Plastic
––
–
–––
––
Masonry––
Ductile Iron
–Masonry
––
Cast Iron
Ductile Iron
–Masonry
–––
–Masonry
–
––
–
1/16" 1/16"1/16"1/16"1/16"3/16"1/16"1/16"3/32"1/16"1/16"1/16"1/16"1/16"7/64"5/64"3/16"1/16"1/16"1/16"5/64"3/16"5/64"5/64"5/64"5/64"
31/8" 31/8" 31/8"
65/8" 65/8"65/8"65/8"65/8"
65/8"
105/8"105/8"105/8"105/8"105/8"
13"
145/8"145/8"
155/8"155/8"155/8"
181/2"181/2"181/2"
247/8"247/8"
317/8"
**Use ProLube™ Specialty Lubricants with Hacksaw Blades to help tools work cooler, longer and more efficiently. ProLubeLubricants are non-toxic and ideal for stainless steel and hard metal cutting applications. See page 31 for details.**
Blade GuidesBlade Guides
• Ensure straight cutting through pipe and difficult materialsModel No. 5 1207 9970 for pipes up to 13" (20" min. blade length required)
Model No. 5 1207 8910 for pipes up to 21" (30" min. blade length required)
Optional guides with two roller bearings
Extra thick for 90˚ cutting
PORT
ABL
E BA
ND
SA
WS
18 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Portable Band SawsPortable Band SawsFast, on-site cutting of
pipe and other materialsPneumatic • Electric • Hydraulic
Power for a wide range of industries
• Ideal for the toughest use in refineries, chemical plants, gas utilities, construction, offshore oil, mining, marine and demolitionindustries
• Fast, deep cutting of pipe, conduit,bolts, cable, angle iron, structural steel, chain and more
• Cut steel, stainless steel, Inconel,chrome, Hastelloy, aluminum,copper, iron, fiberglass, plastics,wood and more
p. 19
p. 20
p. 19
p. 20
4 3/4" Electric Band Saw
4 3/4" and 7" Deep Throat ™
Hydraulic Band Saws
7" Deep Throat ™
AirBand Saw
7" Deep Throat ™
Electric Band SawBand Saw AccessoriesWe also offer a full line of Band Saw blades andaccessories, including vise clamps for straightcutting. Please see page 21 for more information.
4 3/4" AirBand ™ Saw
p. 20
ATEX CertifiedATEX Certified
ATEX CertifiedATEX Certified
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
PORT
ABL
E BA
ND
SA
WS
19
• Fast, on-site cutting
• Safer in hazardous atmospheres than electric saws
• Ideal for process shutdowns and turnarounds
• Reduces need for "hot work permits"
• No fear of electric shock or blown circuitry in wet environments
• AirBand™ models with aluminum housing cut up to 43/4" OD
• Deep Throat™ models with planetary gearbox cut up to 7" OD
Vise Clamp for Straight CuttingSecurely clamp to round, square and angular materials for accurate cuts
Model No. 5 6031 9400 – Clamp-on vise for 7" Band Saw(Models 5 6031/5 6041/5 6047)Rounds: 7" (180mm); Squares: 5" (125mm); Angles: 5" (125mm)
Pneumatic Portable Band SawsPneumatic Portable Band Saws
AirBand™5 6003 0010
Deep Throat™ AirBand5 6031 0010
0.7 HP, 90 PSI,20 CFM
1.3 HP, 90 PSI,43 CFM
Motor Powerand Specs.
Variable130-220
Variable240-295
BladeSpeed(RPM)
447/8"
x 1/2"
66"
x 5/8"
BladeSize
Aluminum
StainlessSteel
Housing
211/2"
283/4"
OverallLength
1/4" NPT(ID)
1/2" NPT(ID)
AirConnec-
tion
14
28
Wgt.(lbs.)
3/8"
1/2"
AirHose
41/2" x 43/4"
7" x 7"
Rectangular
43/4"
7"
Round
CapacityModel No.
AirBand™ Model 5 6003 00104 3/4" OD cutting capacityATEX Certified for Ex Zone 2
Ideal for hazardous atmospheres and wet environments
Deep Throat™ AirBand Model 5 6031 00107" OD cutting capacityATEX Certified for Ex Zone 2
7"Cutting Capacity
ATEX CertifiedATEX Certified
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
• Ideal for plumbing and mechanical contractors,as well as demolition and plant maintenance
• Heavy-duty variable-speed motorsoperate on 110VAC; 220V available
• Standard models withaluminum housing cut up to 43/4" OD
• Deep Throat™ modelswith stainless steelhousing and planetarygearbox cut up to 7" OD
• Fast on-site cutting
Hydraulic Band Saws• Heavy-duty mining, utility, marine and construction
applications
• Operate on 2000 PSI / 4 GPM (up to 13 GPM) hydraulic oil
• Standard models cut up to 43/4" OD
• Deep Throat™ models with planetary gearbox cut up to 7" OD
• 1/2" Flush-face (HTMA) couplings and hoses are included
Electric Model 5 6046 0010
Electric Deep Throat™ Model 5 6047 0010cuts a section of rail
Electric5 6046 0010
Deep Throat™ Electric5 6047 0010
5.8 Amp,110VAC
5.8 Amp,110VAC
Motor Powerand Specs.*
Variable100-245
Variable100-245
BladeSpeed(RPM)
447/8" x 1/2"
66" x 5/8"
Blade Size
Aluminum
StainlessSteel
Housing
211/2"
283/4"
OverallLength
14
28
Weight(lbs.)
41/2" x 43/4"
7" x 7"
Rectangular
43/4"
7"
Round
CapacityModel No.
Hydraulic - 1/2" FF (HTMA) Couplings5 6043 0010
Deep Throat™ Hydraulic - 1/2" FF (HTMA) Couplings5 6041 0010
1.6 HP, 2000 PSI,4 GPM
1.6 HP, 2000 PSI,4 GPM
Motor PowerSpecs.
Variable100-256
Variable100-256
BladeSpeed(RPM)
447/8" x 1/2"
66" x 5/8"
Blade Size
StainlessSteel
StainlessSteel
Housing
22"
283/4"
OverallLength
23
28
Weight(lbs.)
41/2" x 43/4"
7" x 7"
Rectangular
43/4"
7"
Round
CapacityModel No.
PORT
ABL
E BA
ND
SA
WS
20
Electric and Hydraulic Portable Band SawsElectric and Hydraulic Portable Band SawsConstruction, utility, marine and demolition applications
Electric Band Saws
1/2" FF Coupling
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
No. 9 2506 0010No. 9 2506 0020No. 9 2506 0030No. 9 2506 0040
Blades for standard saws (Model Nos. 5 6003 0010, 5 6046 0010 and 5 6043 0010)
18 TPI
14 TPI
10/14 TPI*
8/12 TPI*
* Variable tooth pitch (10/14 TPI and 8/12 TPI) saw blades cut faster and last longer than standard pitch blades. Varying tooth size and gullet depth reduce harmonic vibration for quieter, more efficient cutting.
Cuts material 1/8" - 1/4" thick
Cuts material 3/16" - 1/2" thick
Cuts material 3/16" - 1/2" thick
Cuts material 1/2" and thicker
447/8" L x 1/2" W x .025" T
447/8" L x 1/2" W x .025" T
447/8" L x 1/2" W x .025" T
447/8" L x 1/2" W x .025" T
No. 9 2506 0220No. 9 2506 0230No. 9 2506 0240No. 9 2506 0200
14 TPI
10/14 TPI*
8/12 TPI*
8 TPI
Cuts material 3/16" - 1/2" thick
Cuts material 3/16" - 1/2" thick
Cuts material 1/2" and thicker
Cuts material 3/4" and thicker
66" L x 5/8" W x .025" T
66" L x 5/8" W x .025" T
66" L x 5/8" W x .025" T
66" L x 5/8" W x .025" T
Blades for Deep Throat™ saws (Model Nos. 5 6031 0010, 5 6047 0010 and 5 6041 0010)
M42 Cobalt Steel SuperBand™ Saw Blades
CS Unitec's SuperBand™ saw blades are made of tough M42 steel.8% cobalt gives our blades the highest heat resistance and wearresistance of all portable band saw blades. The hardness is Rc 67-69.
SuperBand™ saw blades easily cut most ferrous and nonferrousmetals, including steel, stainless steel, Inconel, chrome, Hastelloy,tool steels, "super" alloys and other materials. Longer life, fewer bladechanges and the fastest cutting rates result in SuperBand™ providingthe lowest cost per cut.
• Securely clamp to round,square and angular materials for straight cutting
• Easily attach to CS UnitecPortable Band Saws, modelnumbers:5 6031 00105 6041 00105 6047 0010
Vise Clamp for Accurate CutsVise Clamp for Accurate Cuts
PORT
ABL
E BA
ND
SA
W B
LAD
ES A
ND
AC
CES
SORI
ES
21
Band Saw Blades and AccessoriesBand Saw Blades and Accessories
Model 5 6031 9400with Band Saw
Model No. 5 6031 9400Clamp-on vise for 7" Deep Throat™ Band SawsMaximum material size – rounds: 7"; squares: 5"; angles: 5"
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Powerful, efficient cutting of wood and plasticUsed successfully for many yearsin polyethylene plants, petrochemicalindustries, utilities, underground minesand marine applications
PNEU
MA
TIC
CH
AIN
SA
WS
22
4 HP Pneumatic Chain Saw4 HP Pneumatic Chain Saw
• Ideal for use in polyethylene plants,petrochemical industries, utilities, undergroundmines and marine applications
• Pneumatic power is safer than gas or electric inhazardous atmospheres and wet environments,including underwater applications
• Low maintenance and easy startup – saw chainand motor are automatically oiled by twoseparate lubricating systems
• Powerful 4 HP motor at 90 PSI air pressureand 92 CFM
• Chain guard to protect operator
• Available with 17", 21" and 25" cutting capacity
• .404 pitch Super Chisel saw chain is standard
• Carbide-tipped and Ripping saw chainare optional
Model 5 1007 004025" cutting capacity
General Use5 1007 00105 1007 00205 1007 0040Underwater Use*5 1008 00305 1008 0040
* Pneumatic Chain Saw with 17" cutting capacity is also available for underwater applications.
4 HP
4 HP
4 HP
4 HP
4 HP
Power CuttingCapacity
17"
21"
25"
21"
25"
92
92
92
92
92
33"
37"
41"
37"
41"
CFM
90
90
90
90
90
PSI
18
19
20
19
20
Lengthwith Bar
Weight(lbs.)
3/4" NPT (ID)3/4" NPT (ID)3/4" NPT (ID)
3/4" NPT (ID)3/4" NPT (ID)
5/8"5/8"5/8"
5/8"5/8"
AirConnection Hose ID
ModelNo.
Underwater chain sawshown with exhaust valve.Model Series 5 1008
Air Tool Line Conditioner forunderwater air tools todisplace moisture. Developedto inhibit rust and corrosion ofair motors. 1 quart/liter, orderpart number MS 9105.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
• Ideal all-purpose air chain saw• Only 5.4 lbs.• 10" capacity• Ideal for use in utilities, mines,
construction and agriculture
• More cutting efficiency with less down time
• Stays sharp 25x longer and lasts 10x longerthan regular-life saw chains
• Efficiently cuts tough materials, includingplastics, railroad ties, utility poles, hardwoodsand soft masonry materials
• Withstands severe cutting conditions thatinclude sand, mud, salvage work, etc.
• Easily resharpened
• Available in 10", 17", 21" and 25" lengths
• For wood and plastics
• Armor Tip available in 10", 17", 21" and 25" lengths
• Sprocket Tip available in 10" length only
Also available: Super Chisel and Ripping saw chain in 10", 17", 21" and 25" lengths
Motor PowerCutting CapacityPSICFMLengthWeightAir Connection
1.2 HP10"903021"
5.4 lbs.1/4" NPT (ID)
Model 5 1005 0010
Carbide-tipped Saw ChainCarbide-tipped Saw Chain
• For use with pneumatic chain saw, model no. 5 1005 0010 (above)
• Trigger on handle allowsaccurate control of speed
Chain Saw Extension Rod – Chain Saw Extension Rod – extends saw reach to 7'
Guide BarsGuide Bars
Close-up of Carbide-tipped ChainPN
EUM
ATI
C C
HA
IN S
AW
S A
ND
AC
CES
SORI
ES
23
Utility Pneumatic Chain SawUtility Pneumatic Chain SawCompact, lightweight and powerful
Part No.0165.0602
Model 5 1005 001010" cutting capacityIncludes built-in chain oiler
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
CO
NC
RETE
CH
AIN
SA
WS
24
Concrete Chain SawsConcrete Chain SawsCut through walls, floors and columns in a single pass
• Specifically designed for the demandingrequirements of professional sawing anddrilling contractors
• Now with AirFORCE F4™ Diamond chain –optimized for use with pneumatic saw
• Deep plunge cuts – up to 15" deep
• Square corners up to 14" with no overcuts
• Cut mechanical openings and irregular shapes
• Easily cut through reinforced concrete, brick,block, concrete pipe and natural stone
• Durable industrial finish on die-cast aluminumbody stands up to harsh environments
• Built-in Wallwalkerprovides leverageadvantage to makecutting easier
Optimized for pneumatic chainsawing
Model CS 536163-26.5 HP Air Motor
Pneumatic • Hydraulic
CS Unitec Offers 2 Types ofConcrete Chain Saws to MeetYour Cutting Requirements:
CS 536163 Pneumatic• High torque output for tough
cutting jobs• Powerful 6.5 HP air motor• No gas or engine fumes –
ideal for confined spacesand indoor use
• Noise level: 88 dB at 3 feet (approx. 1 meter)
• Weight: 29 lbs. (without bar and chain)
CS 526822 Hydraulic• Dependable, powerful
11 HP motor• Hydraulic power for heavy-duty
mining, utility, marine and construction applications
• Weight: 25 lbs. (without bar and chain)
Please see page 26 forConcrete Chain SawAccessories, including:
• Diamond Chains• Guide Bars• SpeedHook®
• And More!
Plunge cut up to 15" deep!
AirFORCE F4™
Diamond Chains
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
CO
NC
RETE
CH
AIN
SA
WS
25
CS 536163-1CS 536163-2
CS 526822-1CS 526822-2
6.5 HP
6.5 HP
11 HP
11 HP
Power
124 CFM @ 90 PSI (6 bar)
124 CFM @ 90 PSI (6 bar)
8 GPM @ 2500 PSI (172 bar)
8 GPM @ 2500 PSI (172 bar)
32
33
28
29
104
104
95
95
88 dB
88 dB
88 dB
88 dB
Motor Specifications
5700 RPM
5700 RPM
5700 RPM
5700 RPM
No LoadSpeed
Weight w/Bar andChain
No LoadTorque(in.-lbs.)
NoiseLevelat 3 ft.
10"
15"
10"
15"
Max.Depthof Cut
Model No.
Concrete Chain SawsConcrete Chain SawsRugged construction for demanding applications
Pneumatic Concrete Chain Saw
Hydraulic Concrete Chain Saw
Above: OptionalSpeedHook ® guidessaw for straightcutting (see page 26).
Model CS 52682211 HP Hydraulic Motor
FORCE F4Diamond Chains
ECO50-T and ECO50-TAKElectric and HydraulicReversible motor for drilling and tapping applications
Cuttercapacity 2" dia.
CO
NC
RETE
CH
AIN
SA
W A
CC
ESSO
RIES
26 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
AirFORCE StandardGeneral-purpose Diamond Chain10" – Part No. 53616615" – Part No. 536167
AirFORCE AbrasivePROFor cutting soft,abrasive material10" – Part No. 53174715" – Part No. 525344
Concrete Chain Saw AccessoriesConcrete Chain Saw AccessoriesMake your concrete chain saw work for you
1.
Three options for cutting
Guide BarsGuide Bars with internal water feed10" Guide BarPart No. 529829• 10" cutting capacity• 9" depth of square cut• Accommodates a 25
segment Diamond Chain
15" Guide BarPart No. 523080• 15" cutting capacity
• 14" depth of square cut
• Accommodates a 29segment Diamond Chain
AirFORCE PremiumFor cutting concretewith steel reinforcement10" – Part No. 53616415" – Part No. 536165
10" chain has 25 segments for 10" max.cutting depth, 9" square corners
15" chain has 29 segments for 15" max.cutting depth, 14" square corners
Match the Diamond Chain tothe material or application:
2. 3.
SpeedHook ®SpeedHook ®
Guides the saw for straight cutsSpeedHook® Complete Kit Part No. CS 70552 (includes SpeedHook® 42" rail,1 saw adapter and 1 axle)• Quickly and easily attaches
to wall with anchors
• Guides saw for straight cuttingthrough reinforced concrete,brick, block and natural stone
• Note: Reduces cutting depth by 3"
AirFORCE F4™
Diamond Chains
ECO32-T and ECO32-TAKECO32-T and ECO32-TAKReversible motor for drilling and tapping applications
Cuttercapacity 11/4" dia.
CO
NC
RETE
CH
AIN
SA
W C
HA
INS
27• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Maximize Diamond Chain life with these hints
The cutting life of the chains is not guaranteed. There aremany variables from job to job, including hardness of concrete,which make it impossible to accurately predict chain life.*These numbers are rough, starting point estimates only, notfor bidding purposes. Please refer to Operator's Manual forproper safety precautions.
Concrete Diamond Chain LifeConcrete Diamond Chain Life
Factors negatively affecting chain life:• Steel reinforcing… many pieces of large diameter rebar cause reduced life• Aggregate hardness… harder aggregates cause reduced life• Operator experience… first-time users generally get less chain life
Cutting tips to improve chain life:• Use minimum of 20 PSI water pressure• Always cut at full throttle – slowly plunge into wall
and push hard enough to cause the RPMs to drop by 25% to 30%• Always apply steady feed force• Slowly rock the bar and chain into the cut using Wallwalker®
as a pry point• Reduce arm motions – hold saw close to body, using legs and body to apply
feed force; always cut with saw between shoulders and knees, preferably at waist height• If saw begins to drift off the intended cut line, pull out and restart cut
Estimated chain life for AirFORCE Premium – 29 segment chain (Part No.CS 536164-15) is approximately 600 in.-ft. in concrete with up to 5/8" rebar.
Wall Thickness
6 inches
8 inches
10 inches
Lineal feet in common wall thickness*:Lineal Cutting Feet
100 feet
75 feet
60 feet
8"
7'
3'How to calculate inch-foot (in.-ft.)An inch-foot (in.-ft.) is equal to the Depth of Cutin inches x Length of Cut in feet. This measurementis used to determine chain or blade life.
For example:Calculate how many in.-ft. are in this doorway.
1. Determine the Depth of Cut in inches.For this example, it is 8 inches.
2. Determine the Length of Cut in feet.3 + 7 + 3 + 7 = 20 feet.
3. Multiply the two numbers.8 in. x 20 ft. = 160 in.-ft.
Note for metric users: 1cm = .3937 inches and 1 meter = 3.2808 ft.
• Removes moisture and dirt from air lines; a float valveautomatically ejects water and dirt
• Includes automatic oiler; prevents tools from freezing incold environments
• Eliminates air motor downtime caused by water and dirt
• Connections for two tools, max. air flow 185 CFM
AirPacAirPac Extends life of pneumatic power tools see page 29 for more information
Model CSAP-2
PNEU
MA
TIC
CU
T-O
FF S
AW
S
28 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Pneumatic Cut-off SawsPneumatic Cut-off Saws - Hand-held and Walk-behind
Cut concrete, asphalt, masonry, steel and more
Hand-held Cut-off Saws, 14" and 18"• Wet or dry cutting of concrete, reinforced
concrete, asphalt, masonry, steel and more• Cut up to 7" deep with no gas or engine fumes• Low maintenance – no belts, pistons, fuel lines
or carburetors• Accept diamond or abrasive blades• Adjustable blade guard with built-in water connection• In-line oiler for motor lubrication• 1" arbor size, 1/2" NPT air connection
Walk-behind Cut-off Saw – 20" Capacity• Wet or dry cutting of concrete, asphalt
and other materials
• Cut up to 7" deep with no gas or engine fumes
• Low maintenance – no belts, pistons,fuel lines or carburetors
• Designed for tough cutting jobs, including jointsawing, floor sawing, trenching, road repair and plant maintenance
• 9.5 HP pneumatic motor with gearbox drive
• Rugged steel construction – yet only 107 lbs.
• Built-in water connection for wet cutting
• Built-in oiler for motor lubrication
• Optional water tank kit
PowerRPM (No Load)Max. Depth of CutMax. Blade CapacityCFM @100 PSIDriveWeight
9.5 HP2900
7"20"92
Gearbox107 lbs.
Model CSR 150
Cut-off Saw with 12" abrasive blade
14" Cut-off Saw with diamond blade
Built-in 3/4" water connection
• 1/2" NPT AirConnection(works onboth left andright side)
Adjustable •crank handleto raise and lower blade
•
High-torqueoutput gear box
• 3/4" WaterConnection
• 1" arbor• Weighs 107 lbs.
Pointer •
CSH 100CSH 125CSH 150
5 HP
9.5 HP
9.5 HP
Power
5250
3200
3200
RPM(No Load)
Max.Depthof Cut
4"
5"
7"
90
92
92
Direct
Gearbox
Gearbox
CFM @100 PSI
14
14
18
Max.Blade
Capacity
22
26
28
Drive Weight(lbs.)
ModelNo.
AIR
TO
OL
AC
CES
SORI
ES
29• 1-800-700-5919 • Visit our Web site at www.csunitec.com
AirPacAirPac
Air Tool Lubricant – Air Tool Lubricant – Non-toxic
• Removes 98% of water andcontaminants from both portableand stationary compressed airsystems to protect pneumatic tools
• Totally automatic – a float valveautomatically ejects theaccumulated water and dirt
• Maintenance-free – no filters orparts to replace or service
• Includes automatic 1/2 pint oiler;prevents tools from freezing in coldenvironments
• Two tool outlets; Chicagocouplings on all connections
• Weighs 40 lbs., max. air 185 CFM
• Use Air Tool Lubricant for bestresults – see below for moreinformation
How it Works:
• Air compressors compress air into smallareas – this causes heat, which containsmoisture
• As heated air travels through air lines, itcools, creating water droplets
• When this air/water mixture enters theAirPac, it travels through a baffle that trapsthe water and dirt and drops it into aholding area
• When enough water is accumulated, a floatallows the water and dirt to beautomatically ejected
• Dry air then enters the lubricator and ismixed with oil and sent to the tool
CS Unitec offers three types:
ProLube-ATL: A super-premiumsynthetic air tool lubricant. Providesmaximum lubrication, cleaning andprotection for portable air tools.
ProLube-ATL/AF (anti-freeze):ProLube-ATL/AF blend that preventsfreezing and is ideal for operating airtools in cold climate conditions.
Air Tool Line Conditioner:For use in underwater air tools.Displaces moisture. Developed toinhibit rust and corrosion of air motors.
Extends life of pneumatic power tools
ProLube-ATL1 gallon bottle
Order No.CS 7043-001
Case (4 bottles)Order No.
CS 7043-002
1 gallon bottleOrder No.
CS 7049-001
Case (4 bottles)Order No.
CS 7049-002
ProLube-ATL/AF
1 quart/liter bottleOrder No.MS 9105
Air Tool Line Conditioner
Model CSAP-2
• Pneumatic or electric power is ideal for cutting sheetmetal, steel plate, weldments and double sheets, as wellas exotic materials and plastics
• Two-speed gearbox (model CS-3400-P or -E)
• Heavy-duty construction
• Head can be rotated to four 90˚ positions (on selected models)
• Cut over 90˚ bends with optional die
• Maximum cutting capacity:Mild Steel: up to .375"Stainless Steel: up to .195"Aluminum: up to .500"
• Ideal for use in underground storage tankremoval, I-beamsplitting, platecutting and more
• Lightweightconstruction withquick-changepunch and die
30 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
NIB
BLER
SPneumatic and Electric NibblersPneumatic and Electric NibblersEasily cut sheet metal and steel up to 3/8" thick
Electric (110 Volt)CS-350-ECS-500-ECS-700-ECS-3400-E*PneumaticCS-350-PCS-500-PCS-700-PCS-3400-P*
* 2-speed gearbox
12 Amp
12 Amp
17.4 Amp
17.4 Amp
1.5 HP/90 PSI
1.5 HP/90 PSI
4 HP/90 PSI
4 HP/90 PSI
Power
–
–
–
–
54
54
100
100
CFM
4
4.5
5
5.2
4
4.5
5
5.2
WorkingSpeed
(ft./min.)
StartHoleDia.
1.25"
1.25"
2.75"
3"
1.25"
1.25"
2.75"
3"
650
600
400
230 / 370
530
530
340
210 / 350
.135"
.197"
.276"
.375"
.135"
.197"
.276"
.375"
.090"
.135"
.197"
.276"
.090"
.135"
.197"
.276"
.135"
.276"
.394"
.500"
.135"
.276"
.394"
.500"
Strokesper
Minute
.280"
3.125"
5.5"
16"
.280"
3.125"
5.5"
16"
Min.Radius
7.5
8.5
26
32
10
10.5
27
32
Mild Steel StainlessSteel
AluminumMax. Sheet Thickness
Weight(lbs.)
ModelNo.
CS-3400 cutsup to 3/8" thicksteel.
LUBR
ICA
NTS
/ W
ARR
AN
TY
31• 1-800-700-5919 • Visit our Web site at www.csunitec.com
LubricantsLubricants
Also Available…Also Available…
WarrantyProducts of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase.This warranty does not apply to normal wear or products which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its Authorized Service Representatives.
If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center, transportation prepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.
CS Unitec, Inc.’s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product.There are no other warranties expressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses excepting only the cost or expense of repair or replacement as described above.
Your cutting tools will work cooler, longer and moreefficiently with ProLube™ Lubricants from CS Unitec.• Improve cutting tool output and performance• Prolong tool life by reducing friction and wear• Unique composition provides
excellent adhesion to cutting tools for maximum lubrication
• Corrosion inhibitor• Ideal for saw blades and drill bits• Non-toxic
ProLube™ProLube™ Ideal for cutting steel,stainless steel and hard metals
ProLube LiquidWater soluble 16:1CS 7010-5041 gal. bottle
ProLube SolidCS 7020-0131.6 oz. push tube
CS 7020-00014.5 oz. push tube
ProLube PasteCS 7030-712
12 oz. tub
High film strength – stays on for the cut!
Non-Sparking &Non-Magnetic Safety ToolsAlBr or CuBe Alloy
• For Ex zones where hazardous,flammable or combustiblematerials may be present
• Hammers, wrenches, sockets and more
AirOperated
• For turning valves, tightening, tapping,reaming, pipe beveling, expanding and more
• Hydraulic models available
Portable Magnetic Drills –Air and Hydraulic
Air NutRunners
AIRBOR™ Drill available withOptional Rack to increasestroke length to 10 1/4"
• Drill up to 21/16" (52mm) dia. holes
• Coolant system reduces risk of sparking
• Lightweight and portable• Electric models to cut holes up to 5" dia. and 4" deep
HB-4400 HydraulicDrill – ideal forsubsea, marine
and constructionapplications
SAFETY & POWER TOOLSCS Unitec has the right tools for working in ATEXand EX zones, as well as in Subsea applications
CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email info@csunitec.com • www.csunitec.com
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2009, CS Unitec, Inc., 04-09-10M
Also available from :CS Unitec, Inc. specializes in electric, pneumatic and hydraulic power tools for construction and industry.
Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company inventedthe first pneumatic portable band saw. CS Unitec has added to its list of industry firsts with the widestrange of portable magnetic drills and hand-held concrete core drills. The line also includes electric,pneumatic and hydraulic portable band saws, reciprocating saws, hacksaws, nut runners, rotary hammerdrills, rolling motors, metal finishing tools, portable mixers, dust extraction tools and vacuum systems.
… the power of innovation!®
For more information, please visit our Web site at www.csunitec.com.
Electric, hydraulic andpneumatic Hand-heldand Rig-mounted Core
Drills for concrete
PneumaticMagnetic Drills
for use inhazardous
environmentsElectric MagneticDrills for cutting up
to 5" holes inmetal
Slow-speed Drive Units for high-torque turning
Nut Runners for turning valves,tightening, tapping, reaming,
beveling and expanding
Air and hydraulic SDS RotaryHammer Drills for concrete
Metal FinishingMachines
Electric, Pneumatic and Hydraulic ToolsElectric, Pneumatic and Hydraulic Tools
View product demonstrations at www.csunitec.com.
Recommended