View
221
Download
11
Category
Tags:
Preview:
DESCRIPTION
civil
Citation preview
5252172
140
L
48,5 N x 125
51 N x 60
52,5
37,5
162
120
Form
wor
k C
ompo
nent
Cat
alog
ue
FormworkComponent Catalogue
Important Notes:
Without exception, all current safety regulations must be observed in those countries where our products are used.
The illustrations in this brochure are photographs of real site situations. Safety or formwork anchor details are therefore not to be taken as a definitive guide to the way the equipment is to be used.
Safety precautions and allowable loads are to be strictly observed at all times. Separate structural calculations are required for any deviations from the standard design data.
The information contained herein is subject to tech-nical changes in the interests of progress.
PERI GmbHFormwork Scaffolding EngineeringP.O. Box 126489259 WeissenhornGermanyTel +49 (0)7309.950-0Fax +49 (0)7309.951-0info@peri.comwww.peri.com
Edition 11/2009
Formwork Girders 1 GT 24 Formwork Girder 5 VT 20 Formwork Girder
Wall Formwork 9 MAXIMO Panel Formwork 38 TRIO Panel Formwork 75 TRIO Housing Panel Formwork 93 DOMINO Panel Formwork 111 HANDSET Panel Formwork 126 VARIO GT 24 Girder Wall Formwork 155 RUNDFLEX Circular Formwork 165 GRV Circular Formwork 171 FTF Facade Formwork 179 SB Brace Frame 201 RS and RSS Push-Pull Props 211 Tie System DW 15, 20, 26, B 15, 20 225 Tie System DK, SK, KK 237 ASP Box-Out Form
Column Formwork 243 RAPID Column Formwork 253 QUATTRO Column Formwork 263 TRIO Column Formwork275 LICO Column Formwork 281 VARIO GT 24 Column Formwork 291 SRS Column Formwork
Slab Formwork 299 SKYDECK Panel Slab Formwork 311 GRIDFLEX Grid Element Slab Formwork 319 MULTIFLEX Girder Slab Formwork 329 PERI Table Modules VT, SRU 341 Beam Formwork UZ, AW, UZR
Shoring Systems 347 MULTIPROP System 359 PEP 10, 20, 30 Slab Props 365 ST 100 Stacking Tower 373 PERI UP Rosett Shoring 385 HD 200 Heavy Duty Prop
Climbing Systems 397 FB 180 Folding Platform System 413 ASG 70-100 Platform System 421 CB Climbing System, BR Shaft Platform Scaffolding, Stairs, Working Platforms 445 PERI UP Stairs 458 PERI UP Rosett Modular Scaffolding 479 PERI UP Independent Accessories
Bridge- and Tunnel Formwork 493 Civil Construction Set VARIOKIT (Basic Comp.) 505 GKB Cantilevered Parapet Platform Plywood, System-Independent Accessories 519 Plywood 525 Construction Site Equipment 535 Accessories for Logistics 545 Machines and Tools 556 Bolts, Nails, Pins 571 Accessories
Service578 TRIO Cleaning, Repair (Custom Formwork) 589 DOMINO Cleaning, Repair (Custom Formwork) 593 SKYDECK Cleaning, Repair (Custom Formwork) 597 Technical Planning
PERI 600 Alphabetical Index 622 Numerical Index 646 PERI International
Content
075100 Girder GT 24 l = 0.90 m 2075120 Girder GT 24 l = 1.20 m 2075150 Girder GT 24 l = 1.50 m 2075180 Girder GT 24 l = 1.80 m 2075210 Girder GT 24 l = 2.10 m 2075240 Girder GT 24 l = 2.40 m 2075270 Girder GT 24 l = 2.70 m 2075300 Girder GT 24 l = 3.00 m 2075330 Girder GT 24 l = 3.30 m 2075360 Girder GT 24 l = 3.60 m 2075390 Girder GT 24 l = 3.90 m 2075420 Girder GT 24 l = 4.20 m 2075450 Girder GT 24 l = 4.50 m 2075480 Girder GT 24 l = 4.80 m 2075510 Girder GT 24 l = 5.10 m 2075540 Girder GT 24 l = 5.40 m 2075570 Girder GT 24 l = 5.70 m 2075600 Girder GT 24 l = 6.00 m 2
1
GT 24 Formwork Girder
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sC
limbi
ng S
yste
ms
Sho
ring
Syst
ems
Sla
b Fo
rmw
ork
Col
umn
Form
wor
k W
all F
orm
wor
kFo
rmw
ork
Gird
ers
GT 24 Formwork Girder
2
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
075100075120075150075180075210075240075270075300075330075360075390075420075450075480075510075540075570075600
5,300 7,100 8,900 10,600 12,400 14,200 15,900 17,700 19,500 21,200 23,000 24,800 26,600 28,300 30,100 31,900 33,600 35,400
Girders GT 24 Nominal LengthsGirder GT 24 l = 0.90 mGirder GT 24 l = 1.20 mGirder GT 24 l = 1.50 mGirder GT 24 l = 1.80 mGirder GT 24 l = 2.10 mGirder GT 24 l = 2.40 mGirder GT 24 l = 2.70 mGirder GT 24 l = 3.00 mGirder GT 24 l = 3.30 mGirder GT 24 l = 3.60 mGirder GT 24 l = 3.90 mGirder GT 24 l = 4.20 mGirder GT 24 l = 4.50 mGirder GT 24 l = 4.80 mGirder GT 24 l = 5.10 mGirder GT 24 l = 5.40 mGirder GT 24 l = 5.70 mGirder GT 24 l = 6.00 mUniversal formwork girder made of wood.
L 918 1214 1510 1806 2102 2398 2694 2990 3286 3582 3878 4174 4470 4766 5062 5358 5654 5950 NoteConstruction Approvel No .Z-9.1-157. The common lengths of the GT 24 are colour-coded to allow easy handling.Technical Dataperm. QD = 14.0 kNperm. QZ = 13.0 kNperm. M = 7.0 kNmly = 8000 cm4
QD = perm. shear force Compression StrutQZ = perm. shear force Tension Strut
311 296
163 296
28
80
6012
060
240
L
3 S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sC
limbi
ng S
yste
ms
Sho
ring
Syst
ems
Sla
b Fo
rmw
ork
Col
umn
Form
wor
k W
all F
orm
wor
kFo
rmw
ork
Gird
ers
4 S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
073710 Girder VT 20 l = 1.45 m 6073720 Girder VT 20 l = 2.15 m 6073730 Girder VT 20 l = 2.45 m 6073740 Girder VT 20 l = 2.65 m 6073750 Girder VT 20 l = 2.90 m 6073760 Girder VT 20 l = 3.30 m 6073770 Girder VT 20 l = 3.60 m 6073780 Girder VT 20 l = 3.90 m 6073790 Girder VT 20 l = 4.50 m 6073800 Girder VT 20 l = 4.90 m 6073810 Girder VT 20 l = 5.90 m 6074990 Girder VT 20K l = 1.45 m 6074905 Girder VT 20K l = 2.15 m 6074910 Girder VT 20K l = 2.45 m 6074890 Girder VT 20K l = 2.65 m 6074920 Girder VT 20K l = 2.90 m 6074950 Girder VT 20K l = 3,90 m 6074930 Girder VT 20K l = 3.30 m 6074940 Girder VT 20K l = 3.60 m 6074960 Girder VT 20K l = 4.50 m 6074970 Girder VT 20K l = 4.90 m 6074980 Girder VT 20K l = 5.90 m 6
5
VT 20 Formwork Girder
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sC
limbi
ng S
yste
ms
Sho
ring
Syst
ems
Sla
b Fo
rmw
ork
Col
umn
Form
wor
k W
all F
orm
wor
kFo
rmw
ork
Gird
ers
VT 20 Formwork Girder
6
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
073710073720073730073740073750073760073770073780073790073800073810
8,560 12,700 14,460 15,640 17,110 19,470 21,240 23,010 26,550 28,910 34,810
Girder VT 20 without Steel CapGirder VT 20 l = 1.45 mGirder VT 20 l = 2.15 mGirder VT 20 l = 2.45 mGirder VT 20 l = 2.65 mGirder VT 20 l = 2.90 mGirder VT 20 l = 3.30 mGirder VT 20 l = 3.60 mGirder VT 20 l = 3.90 mGirder VT 20 l = 4.50 mGirder VT 20 l = 4.90 mGirder VT 20 l = 5.90 m
074990074905074910074890074920074930074940074950074960074970074980
8,560 12,700 14,460 15,640 17,110 19,470 21,240 23,010 26,550 28,910 34,810
Girders VT 20K with Steel CapGirder VT 20K l = 1.45 mGirder VT 20K l = 2.15 mGirder VT 20K l = 2.45 mGirder VT 20K l = 2.65 mGirder VT 20K l = 2.90 mGirder VT 20K l = 3.30 mGirder VT 20K l = 3.60 mGirder VT 20K l = 3.90 mGirder VT 20K l = 4.50 mGirder VT 20K l = 4.90 mGirder VT 20K l = 5.90 mFormwork girder made of wood. Webs are roun-ded for reducing damage.
L 1450 2150 2450 2650 2900 3300 3600 3900 4500 4900 5900 NoteConstruction Approvel No .Z-9.1-216.Technical Dataperm. Q = 11.0 kNperm. M = 5.0 kNmly = 4290 cm4
27
80
4012
040
200
100 140 140
100
10022
L
7 S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sC
limbi
ng S
yste
ms
Sho
ring
Syst
ems
Sla
b Fo
rmw
ork
Col
umn
Form
wor
k W
all F
orm
wor
kFo
rmw
ork
Gird
ers
8 S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
023500 Alignment Coupler BFD, galv. 27113847 Anchors MX 15-25 33112387 Anchors MX 20-30 33112464 Anchors MX 30-40 33111850 Articulated Corner MXGA 120 23111872 Articulated Corner MXGA 270 19114607 Articulated Corner MXGA 330 14113246 Articulated Corner MXGI 120 23113203 Articulated Corner MXGI 270 19114583 Articulated Corner MXGI 330 14113255 Bolts SB-MAXIMO, galv. 32023660 Brace Connector TRIO, galv. 29115640 Bulkhead Tie MX DW20 29023640 Bulkhead Tie TS, galv. 28022950 Concreting Platform TRIO 120 x 270 31113018 Cone MX DR 22 35027680 Connector SB-1,2 - MX/TR/D 32025740 Connector SB-A, B, C - MX/TR/D 32112143 Element MX 120 x 120 20112104 Element MX 120 x 240 20112239 Element MX 120 x 30 21112232 Element MX 120 x 45 21112221 Element MX 120 x 60 20112152 Element MX 120 x 90 20112022 Element MX 270 x 120 15112006 Element MX 270 x 240 15112090 Element MX 270 x 30 16112078 Element MX 270 x 45 16112200 Element MX 270 x 60 16112045 Element MX 270 x 90 15112133 Element MX 30 x 240 27114248 Element MX 330 x 120 10114426 Element MX 330 x 240 10116454 Element MX 330 x 270 10114457 Element MX 330 x 30 12114452 Element MX 330 x 45 11114445 Element MX 330 x 60 11114258 Element MX 330 x 90 11112115 Element MX 90 x 240 23112271 Element MX 90 x 30 24112265 Element MX 90 x 45 24112259 Element MX 90 x 60 24112252 Element MX 90 x 90 24112126 Elements MX 60 x 240 25112292 Elements MX 60 x 30 26112286 Elements MX 60 x 45 26112280 Elements MX 60 x 60 25023650 Hook Tie DW 15 l = 400 mm, galv. 28023820 Hook Tie Head DW 15, galv. 28115299 Inside Corner MXI 120 x 50/20 22112689 Inside Corner MXI 120 x 60 21115255 Inside Corner MXI 270 x 50/20 17112419 Inside Corner MXI 270 x 60 17115338 Inside Corner MXI 330 x 50/20 13114470 Inside Corner MXI 330 x 60 12115315 Inside Corner MXI 60 x 50/20 26112726 Inside Corner MXI 60 x 60 26115307 Inside Corner MXI 90 x 50/20 25112715 Inside Corner MXI 90 x 60 25044770 Lifting Gear-3 TRIO 30115168 Lifting Hook MAXIMO 1.5 t 30114797 Magnet Cone Spanner MX 35114036 MAXIMO Waler MAR 170-2 28114034 MAXIMO Waler MAR 85-2 27112850 Multi Panel MXM 120 x 60 21112849 Multi Panel MXM 270 x 60 17114464 Multi Panel MXM 330 x 60 12
112338 Nut Sealing Sleeve MX 16 36112761 Outside Corner MXA 120 x 35 22112830 Outside Corner MXA 120 x 45 22112888 Outside Corner MXA 120 x 90 22112667 Outside Corner MXA 270 x 35 18112806 Outside Corner MXA 270 x 45 18112887 Outside Corner MXA 270 x 90 18114486 Outside Corner MXA 330 x 35 13114478 Outside Corner MXA 330 x 45 13112778 Outside Corner MXA 60 x 35 27112837 Outside Corner MXA 60 x 45 27112822 Outside Corner MXA 60 x 90 26112889 Outside Corner MXA 90 x 90 25116353 Plug MXM 21 34114300 PVC Plug MX 17,5 - 22 34023680 Scaffold Bracket TRG 120 31023670 Scaffold Bracket TRG 80 31112937 Sealing Cone MX 55 35112342 Sealing Sleeve MX 16 35114107 Sleeve SB-MAXIMO, galv. 32113183 Spanner for Sealing Sleeve MX 16 36115058 Stacking Device MAXIMO, galv. 30113019 Stacking Device MX 29114496 Stopper MX 50 MF 34114503 Stopper MX 50 OF 34114509 Stopper MX 84 MF 34114619 Stud Spanner MAXIMO 35115350 Tension and Compression Brace MX 29114290 Tie Rod Spanner MX 34112588 TRIO Stripping Bar 31023551 Waler 85 28114142 Wall Thickness Comp. MX 120 x 10, Alu 23114128 Wall Thickness Comp. MX 270 x 10, Alu 19114212 Wall Thickness Comp. MX 120 x 4 23114165 Wall Thickness Comp. MX 270 x 4 19114191 Wall Thickness Comp. MX 120 x 5 23114186 Wall Thickness Comp. MX 270 x 5 19114181 Wall Thickness Comp. MX 120 x 6 23114174 Wall Thickness Comp. MX 270 x 6 19114394 Wall Thickness Comp. MX 330 x 10, Alu 14114842 Wall Thickness Comp. MX 330 x 4 14114826 Wall Thickness Comp. MX 330 x 5 14114846 Wall Thickness Comp. MX 330 x 6 14112386 Wingnut MX 33
9
MAXIMO Panel Formwork
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sC
limbi
ng S
yste
ms
Sho
ring
Syst
ems
Sla
b Fo
rmw
ork
Col
umn
Form
wor
k W
all F
orm
wor
kFo
rmw
ork
Gird
ers
MAXIMO Panel Formwork
10
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
116454 444,000 Element MX 330 x 270Panel with 18 mm plywood.
600 1500 600
2700
450
1200
1200
450
3300
120
114426 408,000 Element MX 330 x 240Panel with 18 mm plywood.
3300
2400
120
1200
450
1200
450
1320 540540
114248 226,000 Element MX 330 x 120Panel with 18 mm plywood.
3300
450
1200
1200
450
600 600
1200
120
MAXIMO Panel Formwork
11
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
114258 172,000 Element MX 330 x 90Panel with 18 mm plywood.
1200
1200
450
450
3300
900
450 450 120
114445 118,000 Element MX 330 x 60Panel with 18 mm plywood.
300 300
600
450
1200
1200
450
3300
120
114452 99,800 Element MX 330 x 45Panel with 18 mm plywood.
1200
1200
450
450
3300
225225
450
120
MAXIMO Panel Formwork
12
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
114457 79,600 Element MX 330 x 30Panel with 18 mm plywood.
150 150
300
3300
1200
1200
450
450
120
114464 133,000 Multi Panel MXM 330 x 60Panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with33 pc. 116353 Plug MXM 2133 pc. 113998 Sealing MXM 16
3300
600
120
100 10 x 40 = 400 100
1200
1200
450
450
114470 206,000 Inside Corner MXI 330 x 60Panel with 18 mm plywood. For 90 internal corners.
1200
450
1200
450
3300
600
120
480
MAXIMO Panel Formwork
13
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
115338 135,000 Inside Corner MXI 330 x 50/20Panel with 18 mm plywood. For 90 internal corners.
Complete with12 pc. 116353 Plug MXM 2112 pc. 113998 Sealing MXM 16
450
450
3300
200
500
1200
1200
120
114478 175,000 Outside Corner MXA 330 x 45Panel with 18 mm plywood. For 90 external corners.
3300
450
120
114486 154,000 Outside Corner MXA 330 x 35Panel with 18 mm plywood. For 90 external corners.
350
3300
120
MAXIMO Panel Formwork
14
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
114583 86,600 Articulated Corner MXGI 330Made of aluminium, for oblique angles from 75 upwards, internal.
3300
300 300
120
114607 51,100 Articulated Corner MXGA 330Made of aluminium, for oblique angles from 75 upwards, external.
150 15012
0
3300
114842114826114846114394
17,800 18,900 20,200 12,100
Wall Thickness Compensations MX 330Wall Thickness Comp. MX 330 x 4Wall Thickness Comp. MX 330 x 5Wall Thickness Comp. MX 330 x 6Wall Thickness Comp. MX 330 x 10, AluFor adjusting to wall thicknesses.
B 40 50 60 100
3300
B 60
120
100 62
120
MAXIMO Panel Formwork
15
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
112006 336,000 Element MX 270 x 240Panel with 18 mm plywood.
600
1500
600
2700
5401320540
2400
120
112022 186,000 Element MX 270 x 120Panel with 18 mm plywood.
600
1500
600
2700
600 600
1200
120
112045 135,000 Element MX 270 x 90Panel with 18 mm plywood.
600
1500
600
2700
450 450
900
120
MAXIMO Panel Formwork
16
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
112200 104,000 Element MX 270 x 60Panel with 18 mm plywood.
300 300
600
600
1500
600
2700
120
112078 77,600 Element MX 270 x 45Panel with 18 mm plywood.
2700
450
120
1500
600
600
225 225
112090 62,800 Element MX 270 x 30Panel with 18 mm plywood.
2700
300
120
600
1500
600
150 150
MAXIMO Panel Formwork
17
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
112849 101,000 Multi Panel MXM 270 x 60Panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with22 pc. 116353 Plug MXM 2122 pc. 113998 Sealing MXM 16
1500
600
600
2700
600
100 100
120
40010 x 40 =
112419 156,000 Inside Corner MXI 270 x 60Panel with 18 mm plywood. For 90 internal corners.
1500
600
600
2700
120
600
480
115255 102,000 Inside Corner MXI 270 x 50/20Panel with 18 mm plywood. For 90 internal corners.
Complete with8 pc. 116353 Plug MXM 218 pc. 113998 Sealing MXM 16
200
500
600
600
2700
1500
120
MAXIMO Panel Formwork
18
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
112887 294,000 Outside Corner MXA 270 x 90Panel with 18 mm plywood. For 90 external corners.
Complete with24 pc. 116353 Plug MXM 2124 pc. 113998 Sealing MXM 16
600
1500
600
2700
900
120
112806 145,000 Outside Corner MXA 270 x 45Panel with 18 mm plywood. For 90 external corners.
2700
450
120
112667 127,000 Outside Corner MXA 270 x 35Panel with 18 mm plywood. For 90 external corners.
2700
350
120
MAXIMO Panel Formwork
19
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
113203 69,400 Articulated Corner MXGI 270Made of aluminium, for oblique angles from 75 upwards, internal.
2700
300 300
120
111872 41,800 Articulated Corner MXGA 270Made of aluminium, for oblique angles from 75 upwards, external.
2700
120
150 150
114165114186114174114128
14,700 15,700 16,800 10,000
Wall Thickness Compensations MX 270 Wall Thickness Comp. MX 270 x 4Wall Thickness Comp. MX 270 x 5Wall Thickness Comp. MX 270 x 6Wall Thickness Comp. MX 270 x 10, AluFor adjusting to wall thicknesses.
B 40 50 60 100
2700
B 60
120
100 62
120
MAXIMO Panel Formwork
20
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
112104 166,000 Element MX 120 x 240Panel with 18 mm plywood.
600
600
540 1320 540
2400
1200
120
112143 90,700 Element MX 120 x 120Panel with 18 mm plywood.
600
600
600 600
1200
1200
120
112152 67,700 Element MX 120 x 90Panel with 18 mm plywood.
600
600
450 450
900
1200
120
112221 51,200 Element MX 120 x 60Panel with 18 mm plywood.
600
600
1200
300 300
600
120
MAXIMO Panel Formwork
21
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
112232 37,100 Element MX 120 x 45Panel with 18 mm plywood.
600
600
1200
225
450
225 120
112239 27,400 Element MX 120 x 30Panel with 18 mm plywood.
600
600
150 150
1200
300
120
112850 50,400 Multi Panel MXM 120 x 60Panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with11 pc. 116353 Plug MXM 2111 pc. 113998 Sealing MXM 16
600
600
1200
600
100 100
120
40010 x 40 =
112689 80,500 Inside Corner MXI 120 x 60Panel with 18 mm plywood. For 90 internal corners.
600
600
1200
120
600
480
MAXIMO Panel Formwork
22
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
115299 48,500 Inside Corner MXI 120 x 50/20Panel with 18 mm plywood. For 90 internal corners.
Complete with4 pc. 116353 Plug MXM 214 pc. 113998 Sealing MXM 16
600
600
1200
200
500
120
112888 153,000 Outside Corner MXA 120 x 90Panel with 18 mm plywood. For 90 external corners.
Complete with12 pc. 116353 Plug MXM 2112 pc. 113998 Sealing MXM 16
600
600
1200 90
012
0
112830 70,300 Outside Corner MXA 120 x 45Panel with 18 mm plywood. For 90 external corners.
1200
450
120
112761 61,200 Outside Corner MXA 120 x 35Panel with 18 mm plywood. For 90 external corners.
1200 3
5012
0
MAXIMO Panel Formwork
23
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
113246 31,200 Articulated Corner MXGI 120Made of aluminium, for oblique angles from 75 upwards, internal.
1200 300 300
120
111850 19,000 Articulated Corner MXGA 120Made of aluminium, for oblique angles from 75 upwards, external.
1200 150 150
120
114212114191114181114142
6,430 6,990 7,480 4,510
Wall Thickness Comp. MX 120Wall Thickness Comp. MX 120 x 4Wall Thickness Comp. MX 120 x 5Wall Thickness Comp. MX 120 x 6Wall Thickness Comp. MX 120 x 10, AluFor adjusting to wall thicknesses.
B 40 50 60 100
1200 B
120
100
120
112115 121,000 Element MX 90 x 240Panel with 18 mm plywood.
450
450
900
540 1320 540
2400
120
MAXIMO Panel Formwork
24
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
112252 48,900 Element MX 90 x 90Panel with 18 mm plywood.
450
450
450 450
900
900
120
112259 36,600 Element MX 90 x 60Panel with 18 mm plywood.
450
450
900
300 300
600
120
112265 31,200 Element MX 90 x 45Panel with 18 mm plywood.
900
450
225 225
450
450
120
112271 22,000 Element MX 90 x 30Panel with 18 mm plywood.
450
450
150 150
300
900
120
MAXIMO Panel Formwork
25
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
112715 68,100 Inside Corner MXI 90 x 60Panel with 18 mm plywood. For 90 internal corners.
450
450
900
120
600
480
115307 36,600 Inside Corner MXI 90 x 50/20Panel with 18 mm plywood. For 90 internal corners.
Complete with4 pc. 116353 Plug MXM 214 pc. 113998 Sealing MXM 16
450
450
900
200
500
120
112889 133,000 Outside Corner MXA 90 x 90Panel with 18 mm plywood. For 90 external corners.
Complete with12 pc. 116353 Plug MXM 2112 pc. 113998 Sealing MXM 16
450
450
900
900
120
112126 88,100 Elements MX 60 x 240Panel with 18 mm plywood.
300
300 6
00
540 1320 540
2400
120
112280 28,400 Elements MX 60 x 60Panel with 18 mm plywood.
300
300 6
00
600
300 300 120
MAXIMO Panel Formwork
26
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
112286 21,900 Elements MX 60 x 45Panel with 18 mm plywood.
300
300
225 225
450
600
120
112292 16,200 Elements MX 60 x 30Panel with 18 mm plywood.
300
300 6
00
150 150
300
120
112726 45,400 Inside Corner MXI 60 x 60Panel with 18 mm plywood. For 90 internal corners.
300
300 6
00
600
120
600
115315 29,400 Inside Corner MXI 60 x 50/20Panel with 18 mm plywood. For 90 internal corners.
Complete with4 pc. 116353 Plug MXM 214 pc. 113998 Sealing MXM 16
50020
0
300
300
600
120
112822 83,700 Outside Corner MXA 60 x 90Panel with 18 mm plywood. For 90 external corners.
Complete with12 pc. 116353 Plug MXM 2112 pc. 113998 Sealing MXM 16
300
300 6
00
900
120
MAXIMO Panel Formwork
27
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
112837 40,200 Outside Corner MXA 60 x 45Panel with 18 mm plywood. For 90 external corners.
600 450
120
112778 34,900 Outside Corner MXA 60 x 35Panel with 18 mm plywood. For 90 external corners.
600
350
120
112133 52,900 Element MX 30 x 240Panel with 18 mm plywood.
150
150
300
540 1320 540
2400
120
023500 4,350 Alignment Coupler BFD, galv.For all panel connections for MAXIMO, TRIO and RUNDFLEX. Fillers up to 10 cm.
Technical DataPermissible tension force 20.0 kN.
288
164
259
61max 220
114034 13,800 MAXIMO Waler MAR 85-2For longitudinal compensation, height extensions, stopend formwork and special applications with MAXIMO. With captive connecting components.
Technical DataPermissible bending moment 3.9 kNm.
850 30
30
115
264
126
MAXIMO Panel Formwork
28
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
114036 23,000 MAXIMO Waler MAR 170-2For longitudinal compensation, height extensions, stopend formwork and special applications with MAXIMO. With captive connecting components.
Technical DataPermissible bending moment 3.9 kNm.
115
126
1700 30
30
264
023551 8,520 Waler 85Corresponds to Compensation Waler TAR 85 but without mounting hooks.
Technical DataPermissible bending moment 4.4 kNm.
3030
105
850 80
023820 0,375 Hook Tie Head DW 15, galv.For connecting accessories to MAXIMO and TRIO elements. DW 15 thread.
Technical DataPermissible tension force 20.0 kN.
82 30
6815
023650 0,769 Hook Tie DW 15 l = 400 mm, galv.For connecting accessories to MAXIMO and TRIO elements. DW 15 thread.
Technical DataPermissible tension force 20.0 kN.
400
58
20
DW 15
023640 1,140 Bulkhead Tie TS, galv.For force application from the stopend formwork in MAXIMO and TRIO elements. DW 15 thread.
Technical DataPermissible tension force 20.0 kN.
440
140
58
DW 15
MAXIMO Panel Formwork
29
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
115640 6,000 Bulkhead Tie MX DW20For forming wall offsets with MAXIMO in connec-tion with the Multi Panel MXM.
208
255 44
130
023660 3,310 Brace Connector TRIO, galv.For connecting push-pull props and kicker braces to MAXIMO and TRIO elements. Mounted on ver-tical and horizontal struts.
Complete with1 pc. 027170 Bolt 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.
169
222
185
115350 6,430 Tension and Compression Brace MXFor use with foundation formwork up to 1.20 m high and as replacement for the top anchor of the MAXIMO 330.
Complete with1 pc. 115331 Bolt 12 x 65, verz.1 pc. 018060 Cotter Pin 4/1, galv.NoteAdjustable in 0.5 cm increments from 15 to 30 cm and in 1 cm increments from 30 to 40 cm.Technical DataPermissible tension and compressive force 9 kN.
750
174
65
13,2
61
113019 0,068 Stacking Device MXFor easy stacking of MAXIMO panels.
110
50 90
MAXIMO Panel Formwork
30
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
115058 7,490 Stacking Device MAXIMO, galv.For stacking and transportation of 2-5 MAXIMO or TRIO panels of all sizes. Suitable for crane and fork-lift transport. 4 pieces per stack.
Safety InstructionsFollow Instructions for Use at all times!Bearing capacity 500 kg per post, 2 t per stack.
105
810
150
115168 7,740 Lifting Hook MAXIMO 1.5 tFor transporting MAXIMO and TRIO elements.
Safety InstructionsFollow Instructions for Use at all times!Use 2 pieces per transportation unit.Load bearing capacity:Steel elements 1.5 tAlu elements 750 kg
185 110
6032
5
222
11060
044770 15,600 Lifting Gear-3 TRIO For transporting stacks of MAXIMO and TRIO elements.
Safety InstructionsFollow Instructions for Use at all times!
3500
MAXIMO Panel Formwork
31
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
023670023680
12,800 17,000
Scaffold Brackets TRGScaffold Bracket TRG 80Scaffold Bracket TRG 120For assembly of a working and concreting scaffold with MAXIMO and TRIO. Mounted on horizontal and vertical struts.
NoteAutomatically secured when connected.Technical DataPermissible load 150 kg/m2
with maximum width of influence 1.35 m.
165
673
1051
930 / 1297
798 / 1165
159
120
440
3565
022950 129,000 Concreting Platform TRIO 120 x 270Working and concreting platform for MAXIMO and TRIO.
NoteAttached from above to the element, self-secu-ring. Always move with 4-sling lifting gear. Crane lifting gear points are marked in yellow.Technical DataPermissible load 150 kg/m2.
2680
180044099
612
10
1165
123 1330
440
112588 5,520 TRIO Stripping Bar
1180
26
MAXIMO Panel Formwork
32
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
027680 49,600 Connector SB-1,2 - MX/TR/DFor assembly of Brace Frame SB-1.2 on MAXIMO, TRIO and DOMINO elements.
Safety InstructionsLoad-bearing point: capacity 1.0 twith crane sling angle 15.
60
1770
min
1270
max
1650
250
120
490
650
265
160
21
240
027690 027590 113255 114107
0,368 2,400 0,433 1,250
AccessoriesBolt 19 x 165, galv.Hook Strap for SB-1, 2, galv.Bolts SB-MAXIMO, galv.Sleeve SB-MAXIMO, galv.
025740 9,140 Connector SB-A, B, C - MX/TR/DFor connecting MAXIMO, TRIO and DOMINO ele-ments with Brace Frames SB-A0, A, B, C.
Note1 piece per anchor point.
12513
0
120
130
027690 113255 114107
0,368 0,433 1,250
AccessoriesBolt 19 x 165, SB-TRIO, galv.Bolts SB-MAXIMO, galv.Sleeve SB-MAXIMO, galv.
113255 0,433 Bolts SB-MAXIMO, galv.For connecting MAXIMO elements with Brace Frames SB.
127
180
19
Q45
114107 1,250 Sleeve SB-MAXIMO, galv.For connecting MAXIMO elements with Brace Frames SB.
83 54
MAXIMO Panel Formwork
33
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
113847 3,940 Anchors MX 15-25For wall thicknesses 15 - 25 cm.
NoteSpray with release agent before every use to ensure easier striking.Technical DataPermissible tension force 90 kN.
130
196
688
112387 4,060 Anchors MX 20-30For wall thicknesses 20 - 30 cm.
NoteSpray with release agent before every use to ensure easier striking.Technical DataPermissible tension force 90 kN.
130
196
738
112464 4,310 Anchors MX 30-40For wall thicknesses 30 - 40 cm.
NoteSpray with release agent before every use to ensure easier striking.Technical DataPermissible tension force 90 kN.
130
196
838
112386 2,560 Wingnut MXCounter nut for Tie MX.
Technical DataPermissible tension force 90 kN.
141130
196
MAXIMO Panel Formwork
34
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
114290 2,100 Tie Rod Spanner MXFor easy release of the Tie MX.
600
116353 0,004 Plug MXM 21For MAXIMO Multi Panels MXM, Inside Corners 50/20, Outside Corners 90 and Standard Elements for single-sided application.
24 24
15
21
114300 0,017 PVC Plug MX 17,5 - 22For closing MX tie holes in the concrete.
1832
114509 0,057 Stopper MX 84 MFFor closing MX tie holes in the concrete.
NoteWith pressing water (waterproof concrete).Test report available!
17
8230
114496 0,043 Stopper MX 50 MFFor closing MX tie holes in the concrete.
NoteFor use with non-pressing water.
48
30
17
114503 0,036 Stopper MX 50 OFFor closing MX tie holes in the concrete if the flan-ge should not be visible.
NoteFor use with non-pressing water.
50
17
MAXIMO Panel Formwork
35
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
114619 0,037 Stud Spanner MAXIMOFor holding Stopper MX 84 MF and MX 50 MF.
132
36 27
112937 0,183 Sealing Cone MX 55For use with MAXIMO. Use with Anchor MX.
NoteFor use with waterproofed concrete or architectu-ral concrete. Install on both sides.
54
62
114797 0,893AccessoriesMagnet Cone Spanner MX
114797 0,893 Magnet Cone Spanner MXFor removing Sealing Cone MX 55.
560
95
25
113018 0,012 Cone MX DR 22For the use with DW 15 Tie Rods. Fitts for Spacer Tubes DR 22.
63
21
15
112342 0,077 Sealing Sleeve MX 16
52 29
36
16,5
MAXIMO Panel Formwork
36
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
112338 0,011 Nut Sealing Sleeve MX 16
45 16
34
113183 0,556 Spanner for Sealing Sleeve MX 16
200 30
17030
37
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sC
limbi
ng S
yste
ms
Sho
ring
Syst
ems
Sla
b Fo
rmw
ork
Col
umn
Form
wor
k W
all F
orm
wor
kFo
rmw
ork
Gird
ers
38
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
023500 Alignment Coupler BFD, galv. 61023301 Artic. Corner TRIO Structure TSGE 120 61023201 Artic. Corner TRIO Structure TSGE 270 60023200 Articulated Corner TGE 270 48054414 Articulated Corner TGE/4 330 42023300 Articulated Corner TGE120 53106126 Base Spindle TRH 72027690 Bolt 19 x 165, galv. 64023660 Brace Connector TRIO, galv. 63107546 Brace TRP 150-210, compl. 71054511 Brace TRP 240-300, compl. 71054512 Brace TRP 300-360, compl. 71054510 Brace TRP 77-114, compl. 71054528 Bracing TRP 120 71054529 Bracing TRP 240 71023640 Bulkhead Tie TS, galv. 62023550 Compensation Waler TAR 85 61022950 Concreting Platform TRIO 120 x 270 66027680 Connector SB-1,2 - MX/TR/D 64025740 Connector SB-A, B, C - MX/TR/D 64023891 Corner Alu TAE 270/2 59023971 Corner Alu TAE 90/2 60107021 Corner Handrail TRP 70107009 Corner Platform TRP 70022661 Corner TRIO Structure TSE 120 61022581 Corner TRIO Structure TSE 270 60054375 Corner TRIO Structure TSE/4 330 60054519 End Guardrail Frame TRP 73054517 Erection Device TRP 200, 10 kN 72023270 Filler Plate LA 120 x 36 54023170 Filler Plate LA 270 x 36 49054384 Filler Plate LA/4 330 x 36 44101823 Filler Profile TPP 120, Alu 55101813 Filler Profile TPP 270, Alu 50101829 Filler Profile TPP 330, Alu 44023450 Filler Support TPA 120 55023460 Filler Support TPA 270 50054430 Filler Support TPA 330 44023800 Foundation Strap TRIO 67023010 Foundation Tie Clamp TRIO 66101592 Guardrail Post Holder TRIO 66023650 Hook Tie DW 15 l = 400 mm, galv. 63023820 Hook Tie Head DW 15, galv. 63022660 Inside Corner TE 120-2 53022580 Inside Corner TE 270-2 47022840 Inside Corner TE 60-2 57054374 Inside Corner TE/4 330 42103284 Internal Corner TEI 120/135 54103317 Internal Corner TEI 270/135 47054518 Kicker TRP 71107738 Ladder 240-360 72107793 Landing TRP 73106608 Landing w. Ladder TRH 90 72044760 Lifting Gear "Combi"-2 TRIO 67044770 Lifting Gear-3 TRIO 67115168 Lifting Hook MAXIMO 1.5 t 68023690 Lifting Hook TRIO 1.5 t 68023440 Lifting Pin TRIO 68023860 Multi Panel Alu TAM 270 x 72 58023980 Multi Panel Alu TAM 90 x 72 60022630 Multi Panel TRM 120 x 72 53022540 Multi Panel TRM 270 x 72 47054344 Multi Panel TRM/4 330 x 72 42103330 Outside Corner TEA 120/135 54103337 Outside Corner TEA 270/135 48023880 Panel Alu TRA 270 x 30 58023870 Panel Alu TRA 270 x 60 58
023850 Panel Alu TRA 270 x 90 57023900 Panel Alu TRA 90 x 120 59023960 Panel Alu TRA 90 x 30 59023950 Panel Alu TRA 90 x 60 59022600 Panel TR 120 x 120 52022514 Panel TR 120 x 240 51022650 Panel TR 120 x 30 53022640 Panel TR 120 x 60 52022610 Panel TR 120 x 90 52022620 Panel TR 120 x7 2 52022510 Panel TR 270 x 120 45022570 Panel TR 270 x 240 45022560 Panel TR 270 x 30 46022550 Panel TR 270 x 60 46022530 Panel TR 270 x 72 46022520 Panel TR 270 x 90 45022820 Panel TR 60 x 30 57022810 Panel TR 60 x 60 57022800 Panel TR 60 x 72 57022790 Panel TR 60 x 90 56054314 Panel TR/4 330 x 120 40054304 Panel TR/4 330 x 240 40054364 Panel TR/4 330 x 30 41054354 Panel TR/4 330 x 60 41054334 Panel TR/4 330 x 72 41054324 Panel TR/4 330 x 90 40022601 Panel TRIO Structure TS 120 x 120 61022651 Panel TRIO Structure TS 120 x 30 61022641 Panel TRIO Structure TS 120 x 60 61022621 Panel TRIO Structure TS 120 x 72 61022611 Panel TRIO Structure TS 120 x 90 61022511 Panel TRIO Structure TS 270 x 120 60022571 Panel TRIO Structure TS 270 x 240 60022561 Panel TRIO Structure TS 270 x 30 60022551 Panel TRIO Structure TS 270 x 60 60022531 Panel TRIO Structure TS 270 x 72 60022521 Panel TRIO Structure TS 270 x 90 60054315 Panel TRIO Structure TS/4 330 x 120 60054305 Panel TRIO Structure TS/4 330 x 240 60054365 Panel TRIO Structure TS/4 330 x 30 60054355 Panel TRIO Structure TS/4 330 x 60 60054335 Panel TRIO Structure TS/4 330 x 72 60054325 Panel TRIO Structure TS/4 330 x 90 60022631 Panel TRIO Structure TSM 120 x 72 61022541 Panel TRIO Structure TSM 270 x 72 60054345 Panel TRIO Structure TSM/4 330 x 72 60023020 Perforated Foundation Tie, 25 m 66054501 Platform TRP 120 69054506 Platform TRP 120 with Hatch 69054500 Platform TRP 240 69054505 Platform TRP 240 with Hatch 69054504 Platform TRP 60 69054503 Platform TRP 72 69054502 Platform TRP 90 69030300 Plug 20/24 mm 63023560 Projection Waler TVR45/45 62107019 Retainer Corner Platform TRP 70023590 Scaffold Bracket TRG 100/112 65023680 Scaffold Bracket TRG 120 65023670 Scaffold Bracket TRG 80 65026647 Screw Plate DW 15/115, galv. 70105524 Shaft Element TSE 120 55105523 Shaft Element TSE 270 49105525 Shaft Element TSE 330 43750303 Stacking Aid TRIO DW 20 69115058 Stacking Device MAXIMO, galv. 68023030 Stopend Panel TR 120 x 24 55
TRIO Panel Formwork
39
TRIO Panel Formwork
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sC
limbi
ng S
yste
ms
Sho
ring
Syst
ems
Sla
b Fo
rmw
ork
Col
umn
Form
wor
k W
all F
orm
wor
kFo
rmw
ork
Gird
ers
023040 Stopend Panel TR 270 x 24 48023050 Stopend Panel TR/4 330 x 24 43023067 Stopend Panel TRIO AT 120 x 3 56105978 Stopend Panel TRIO AT 120 x 5 56023060 Stopend Panel TRIO AT 270 x 3 51105953 Stopend Panel TRIO AT 270 x 5 51023068 Stopend Panel TRIO MT 120 x 20 56023069 Stopend Panel TRIO MT 120 x 24/25 56023071 Stopend Panel TRIO MT 120 x 30 56023072 Stopend Panel TRIO MT 120 x 35/36 56023061 Stopend Panel TRIO MT 270 x 20 50023062 Stopend Panel TRIO MT 270 x 24/25 50023064 Stopend Panel TRIO MT 270 x 30 50023065 Stopend Panel TRIO MT 270 x 35/36 50023081 Stopend Panel TRIO MTF 120 x 20 56023080 Stopend Panel TRIO MTF 120 x 24/25 56023078 Stopend Panel TRIO MTF 120 x 30 56023079 Stopend Panel TRIO MTF 120 x 35/36 56023074 Stopend Panel TRIO MTF 270 x 20 51023075 Stopend Panel TRIO MTF 270 x 24/25 51023077 Stopend Panel TRIO MTF 270 x 30 51023076 Stopend Panel TRIO MTF 270 x 35/36 51023630 Top Tie Bracket-2 AH, galv. 67112588 TRIO Stripping Bar 63023920 Universal Waler 245 62023551 Waler 85 61023930 Waler Stop 62023990 Wall Thickness Comp. WDA 120 x 10, Alu 54023995 Wall Thickness Comp. WDA 270 x 10, Alu 49023282 Wall Thickness Comp. WDA-2 120 x 5 54023292 Wall Thickness Comp. WDA-2 120 x 6 54023182 Wall Thickness Comp. WDA-2 270 x 5 49023192 Wall Thickness Comp. WDA-2 270 x 6 49054435 Wall Thickness Comp. WDA/4 330 x 10, Alu 43054391 Wall Thickness Comp. WDA/4-2 330 x 5 43054401 Wall Thickness Comp. WDA/4-2 330 x 6 43023281 Wall Thickness Comp. WDAS 120 x 5, Alu 61023291 Wall Thickness Comp. WDAS 120 x 6, Alu 61023181 Wall Thickness Comp. WDAS 270 x 5, Alu 60023191 Wall Thickness Comp. WDAS 270 x 6, Alu 60054395 Wall Thickness Comp. WDAS/4 330 x 5, Alu 60054405 Wall Thickness Comp. WDAS/4 330 x 6, Alu 60
TRIO Panel Formwork
40
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
054304 398,000 Panel TR/4 330 x 240Steel panel with 18 mm plywood.
540 1320 540
2400
575
1075
475
600
575
3300
120
054314 195,000 Panel TR/4 330 x 120Steel panel with 18 mm plywood.
475
1075
600
575
575
3300
1200 120
054324 140,000 Panel TR/4 330 x 90Steel panel with 18 mm plywood.
475
600
575
1075
575
3300
900 120
TRIO Panel Formwork
41
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
054334 119,000 Panel TR/4 330 x 72Steel panel with 18 mm plywood.
1075
575
475
600
575
3300
720 120
054354 107,000 Panel TR/4 330 x 60Steel panel with 18 mm plywood.
600
475
600
575
1075
575
3300
120
054364 74,200 Panel TR/4 330 x 30Steel panel with 18 mm plywood.
300 120
475
600
575
1075
575
3300
TRIO Panel Formwork
42
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
054344 133,000 Multi Panel TRM/4 330 x 72Steel panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with88 pc. 030300 Plug 20/24 mm
575
1075
475
600
575
3300
75 57019 x 30 = 75
720
120
054374 85,800 Inside Corner TE/4 330Steel panel with 18 mm plywood. For 90 internal corners.
575
1075
475
600
575
3300
120
180 3
00
054414 119,000 Articulated Corner TGE/4 330Steel panel with steel formlining. For oblique angles from 75 upwards, used externally and internally.
575
1075
475
600
575
3300
300 300
120
TRIO Panel Formwork
43
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
054391054401054435
20,100 21,400 12,400
Wall Thickness Comp. WDA/4 330Wall Thickness Comp. WDA/4-2 330 x 5Wall Thickness Comp. WDA/4-2 330 x 6Wall Thickness Comp. WDA/4 330 x 10, AluFor adjusting to wall thicknesses.
B 50 60 100
480
480
600
570
600
570
3300
B 60
120
100 62
120
105525 142,000 Shaft Element TSE 330Panel for moving complete shaft internal form-work.
Complete with7 pc. 018060 Cotter Pin 4/1, galv.7 pc. 105400 Bolt 20 x 140, galv.Safety InstructionsLoad-bearing point capacity 2.0 t.
297
1200
1500
3298
300
301
100 600
569
480
1080
569
300
100
450
023050 62,300 Stopend Panel TR/4 330 x 24Steel panel with 18 mm plywood.
240 120
575
1075
475
600
575
3300
TRIO Panel Formwork
44
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
054384 62,200 Filler Plate LA/4 330 x 36For continuous compensations from 6 to 36 cm.
570
5010
3048
060
057
0
400
550
120
3300
24
054430 6,400 Filler Support TPA 330For compensations with 21 mm filler plates.
3260
45
96
101829 9,790 Filler Profile TPP 330, AluFor compensations with 21 mm filler plates.
3300
51
60
98
TRIO Panel Formwork
45
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
022570 329,000 Panel TR 270 x 240Steel panel with 18 mm plywood.
541 1320 539
2400
575
1550
575
2700
120
022510 162,000 Panel TR 270 x 120Steel panel with 18 mm plywood.
2700
1200
575
1550
575
120
022520 115,000 Panel TR 270 x 90Steel panel with 18 mm plywood.
1550
575
575
2700
900 120
TRIO Panel Formwork
46
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
022530 97,200 Panel TR 270 x 72Steel panel with 18 mm plywood.
1550
575
575
2700
120720
022550 87,400 Panel TR 270 x 60Steel panel with 18 mm plywood.
1550
575
2700
575
600 120
022560 60,300 Panel TR 270 x 30Steel panel with 18 mm plywood.
575
1550
575
2700
120300
TRIO Panel Formwork
47
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
022540 102,000 Multi Panel TRM 270 x 72Steel panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with44 pc. 030300 Plug 20/24 mm
1550
575
575
2700
75 57019 x 30 = 75
720
120
022580 69,800 Inside Corner TE 270-2Steel panel with 18 mm plywood. For 90 internal corners.
120
180 3
00
1550
575
575
2700
103317 57,700 Internal Corner TEI 270/135Steel panel with 18 mm plywood. For 135 internal corners.
575
1550
575
2700
189
189
120
135
TRIO Panel Formwork
48
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
103337 75,600 Outside Corner TEA 270/135Steel panel with 18 mm plywood. For 135 exter-nal corners.
575
1550
575
2700
29029
0
135
120
023200 94,900 Articulated Corner TGE 270Steel panel with steel formlining. For oblique angles from 75 upwards, used externally and internally.
2700
300 300
1205
7515
5057
5
023040 50,500 Stopend Panel TR 270 x 24Steel panel with 18 mm plywood.
1550
2700
575
575
240 120
TRIO Panel Formwork
49
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
105523 127,000 Shaft Element TSE 270Panel for moving complete shaft internal form-work.
Complete with7 pc. 018060 Cotter Pin 4/1, galv.7 pc. 105400 Bolt 20 x 140, galv.Safety InstructionsLoad-bearing point capacity 2.0 t.
300
2698
297
900
1200
301
569
1560
569
100
450
100
300
023182023192023995
16,200 17,200 10,100
Wall Thickness Comp. WDA 270Wall Thickness Comp. WDA-2 270 x 5Wall Thickness Comp. WDA-2 270 x 6Wall Thickness Comp. WDA 270 x 10, AluFor adjusting to wall thicknesses.
B 50 60 100
1560
570
570
2700
B 60
120
100 62
120
023170 48,900 Filler Plate LA 270 x 36For continuous compensations from 6 to 36 cm.
570
1510
5057
0
2700
400
120
24
550
TRIO Panel Formwork
50
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
023460 4,710 Filler Support TPA 270For compensations with 21 mm filler plates.
2660
96
45
101813 8,050 Filler Profile TPP 270, AluFor compensations with 21 mm filler plates.
2700
51
98
60
023061023062023064023065
27,500 30,400 37,300 41,300
Stopend Panels TRIO MT w/o waterstop barStopend Panel TRIO MT 270 x 20Stopend Panel TRIO MT 270 x 24/25Stopend Panel TRIO MT 270 x 30Stopend Panel TRIO MT 270 x 35/36Centre piece without waterstop bar installation for stopend formwork.
B 118 158 218 268
2700
120
B
TRIO Panel Formwork
51
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
023074023075023077023076
29,200 33,400 38,600 42,500
Stopend Panel TRIO MTF w waterstop barStopend Panel TRIO MTF 270 x 20Stopend Panel TRIO MTF 270 x 24/25Stopend Panel TRIO MTF 270 x 30Stopend Panel TRIO MTF 270 x 35/36Centre piece with waterstop bar installation for stopend formwork.
B 118 158 218 268
2700
120
B
023060105953
17,200 19,000
Stopend Panel TRIO ATStopend Panel TRIO AT 270 x 3Stopend Panel TRIO AT 270 x 5External piece for stopend formwork.
NoteConcrete cover approx. 30 or 50 mm.
2700
210
120
120
210
AT 270 x 3 AT 270 x 5
022514 163,000 Panel TR 120 x 240Steel panel with 18 mm plywood.
175
2580
017
525
1200
2400
120540 1320 540
TRIO Panel Formwork
52
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
022600 76,100 Panel TR 120 x 120Steel panel with 18 mm plywood.
1200 120
325
850
25
1200
022610 58,200 Panel TR 120 x 90Steel panel with 18 mm plywood.
900 120
325
850
25
1200
022620 48,600 Panel TR 120 x 72Steel panel with 18 mm plywood.
325
850
25
1200
720 120
022640 43,400 Panel TR 120 x 60Steel panel with 18 mm plywood.
850
2532
5
1200
600 120
TRIO Panel Formwork
53
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
022650 28,400 Panel TR 120 x 30Steel panel with 18 mm plywood.
325
850
1200
300 120
25
022630 56,300 Multi Panel TRM 120 x 72Steel panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with44 pc. 030300 Plug 20/24 mm
837
3033
3
1200
720
12019 x 3075 75
022660 33,200 Inside Corner TE 120-2Steel panel with 18 mm plywood. For 90 internal corners.
1200
120
180 3
00
335
830
35
023300 43,600 Articulated Corner TGE120Steel panel with steel formlining. For oblique angles from 75 upwards, used externally and internally.
834
3333
3
1200 300 300
120
TRIO Panel Formwork
54
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
103284 26,900 Internal Corner TEI 120/135Steel panel with 18 mm plywood. For 135 internal corners.
335
830
35
1200
189
189
120
135
103330 34,900 Outside Corner TEA 120/135Steel panel with 18 mm plywood. For 135 exter-nal corners.
335
830
35
1200 290
290
135
120
023282023292023990
7,610 8,090 4,680
Wall Thickness Comp. WDA 120Wall Thickness Comp. WDA-2 120 x 5Wall Thickness Comp. WDA-2 120 x 6Wall Thickness Comp. WDA 120 x 10, AluFor adjusting to wall thicknesses.
B 50 60 100
300
534
3333
3
1200 B
120
100
120
023270 24,500 Filler Plate LA 120 x 36For continuous compensations from 6 to 36 cm.
333
300
534
33
1200
400
550
120
TRIO Panel Formwork
55
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
105524 72,600 Shaft Element TSE 120Panel for moving complete shaft internal form-work.
Complete with5 pc. 018060 Cotter Pin 4/1, galv.5 pc. 105400 Bolt 20 x 140, galv.Safety InstructionsLoad-bearing point capacity 2.0 t.
300
1198
297
600
301
632
566
100
450
300
100
023030 23,100 Stopend Panel TR 120 x 24Steel panel with 18 mm plywood.
240
1200
120
325
850
25
023450 2,060 Filler Support TPA 120For compensations with 21 mm filler plates.
1160
96
45
101823 3,600 Filler Profile TPP 120, AluFor compensations with 21 mm filler plates.
1200
98
51
60
TRIO Panel Formwork
56
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
023067105978
7,780 8,580
Stopend Panel TRIO ATStopend Panel TRIO AT 120 x 3Stopend Panel TRIO AT 120 x 5External piece for stopend formwork.
NoteConcrete cover approx. 30 or 50 mm.
1200 210
120
AT 120 x 3 AT 120 x 5210
120
023068023069023071023072
11,800 13,500 16,300 18,500
Stopend Panels TRIO MT w/o waterstop barStopend Panel TRIO MT 120 x 20Stopend Panel TRIO MT 120 x 24/25Stopend Panel TRIO MT 120 x 30Stopend Panel TRIO MT 120 x 35/36Centre piece without waterstop bar installation for stopend formwork.
B 118 158 218 268
1200 B
120
023081023080023078023079
12,800 14,700 16,800 18,600
Stopend Panels TRIO MTF w. waterstop barStopend Panel TRIO MTF 120 x 20Stopend Panel TRIO MTF 120 x 24/25Stopend Panel TRIO MTF 120 x 30Stopend Panel TRIO MTF 120 x 35/36Centre piece with waterstop bar installation for stopend formwork.
B 118 158 218 268
1200 B
120
022790 34,500 Panel TR 60 x 90Steel panel with 18 mm plywood.
600
900 120
TRIO Panel Formwork
57
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
022800 28,900 Panel TR 60 x 72Steel panel with 18 mm plywood.
600
720 120
022810 25,700 Panel TR 60 x 60Steel panel with 18 mm plywood.
600
600 120
022820 15,600 Panel TR 60 x 30Steel panel with 18 mm plywood.
600
300 120
022840 18,000 Inside Corner TE 60-2Steel panel with 18 mm plywood. For 90 internal corners.
3553
035
120
180 3
00
600
023850 70,200 Panel Alu TRA 270 x 90Aluminium panel with 18 mm plywood.
575
1550
575
2700
900 120
TRIO Panel Formwork
58
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
023870 49,300 Panel Alu TRA 270 x 60Aluminium panel with 18 mm plywood.
2700
1550
575
575
600 120
023880 31,400 Panel Alu TRA 270 x 30Aluminium panel with 18 mm plywood.
2700
1550
575
575
300 120
023860 60,800 Multi Panel Alu TAM 270 x 72Alu panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with44 pc. 030300 Plug 20/24 mm
2700
575
1550
575
75 57019 x 30 = 75
720
120
TRIO Panel Formwork
59
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
ms
Clim
bing
Sys
tem
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
s
023891 42,100 Corner Alu TAE 270/2Alu element with 18 mm plywood. For 90 internal corners.
575
1550
575
2700
120
180 3
00
023900 33,600 Panel Alu TRA 90 x 120Aluminium panel with 18 mm plywood.
25 850 325
1200
900
120
023950 18,000 Panel Alu TRA 90 x 60Aluminium panel with 18 mm plywood.
900
600 120
023960 10,700 Panel Alu TRA 90 x 30Aluminium panel with 18 mm plywood.
900
300 120
TRIO Panel Formwork
60
Item no. Weight kg
S
ervi
ceP
lyw
ood,
Sys
tem
- In
depe
nden
t Acc
esso
ries
Brid
ge- a
nd
Tunn
el F
orm
wor
kS
caff
oldi
ng, S
tairs
, W
orki
ng P
latf
orm
sS
horin
g Sy
stem
sS
lab
Form
wor
kC
olum
n Fo
rmw
ork
Wal
l For
mw
ork
Form
wor
k G
irder
sC
limbi
ng S
yste
ms
023980 23,600 Multi Panel Alu TAM 90 x 72Alu panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with44 pc. 030300 Plug 20/24 mm
3030
900
75 57019 x 30 = 75
720
120
023971 15,200 Corner Alu TAE 90/2Alu element with 18 mm plywood. For 90 internal corners.
3583
035
900 1
2018
0 300
054305054315054325054335054355054365054345054375054395054405
374,000183,000131,000112,000101,000 71,100128,000 80,200 10,800 11,700
Panels TRIO Structure TS/4 330Panel TRIO Structure TS/4 330 x 240Panel TRIO Structure TS/4 330 x 120Panel TRIO Structure TS/4 330 x 90Panel TRIO Structure TS/4 330 x 72Panel TRIO Structure TS/4 330 x 60Panel TRIO Structure TS/4 330 x 30Panel TRIO Structure TSM/4 330 x 72Corner TRIO Structure TSE/4 330Wall Thickness Comp. WDAS/4 330 x 5, AluWall Thickness Comp. WDAS/4 330 x 6, AluPanel with 21 mm base plate.
022571022511022521022531022551022561022541022581023201023181023191
310,000152,000108,000 91,600 82,700 58,100 98,900 65,400 88,700 8,850 9,560
Panels TRIO Structure TS 270Panel TRIO Structure TS 270 x 240Panel TRIO Structure TS 270 x 120Panel TRIO Structure TS 270 x 90Panel TRIO Structure TS 270 x 72Panel TRIO Structure TS 270 x 60Panel TRIO Structure TS 270 x 30Panel TRIO Structure TSM 270 x 72Corner TRIO Structure TSE 270Artic. Corner TRIO Structure TSGE 270Wall Thickness Comp. WDAS 270 x 5, AluWall Thickness Comp. WDAS 270 x 6, AluPanel with 21 mm base plate.
TRIO Panel Formwork
61
Item no. Weight kg
Ser
vice
Ply
woo
d, S
yste
m-
Inde
pend
ent A
cces
sorie
sB
ridge
- and
Tu
nnel
For
mw
ork
Sca
ffol
ding
, Sta
irs,
Wor
king
Pla
tfor
Recommended