View
1.972
Download
15
Category
Preview:
DESCRIPTION
Guide to building european cabinetry based upon 32mm processes.
Citation preview
Universal Boring Pattern
Cabinet type Runner system Description Page
34-1/2” base All Line bore pattern for all base cabinets 1
34-1/2” base All Base types with cross rail positions 2
34-1/2” base All Base door and drawer front heights 3
34-1/2” base METABOX Base pattern: all 320M drawers 4
34-1/2” base METABOX Base pattern: 320M & 320H drawers 5
34-1/2” base TANDEM / SOLO Base pattern: 4” & 8” drawers 6
34-1/2” base STANDARD Base pattern: 4” & 8” drawers 7
34-1/2” base TANDEMBOX Base pattern: 358M drawers 8
TANDEMBOX Bottom drawer template instructions 9
32” vanity All Line bore pattern for all vanity cabinets 10
32” vanity All Vanity types with cross rail positions 11
32” vanity All Vanity door and drawer front heights 12
32” vanity METABOX Vanity pattern: 320M drawers 13
32” vanity METABOX Vanity pattern: 320M & 320H drawers 14
32” vanity TANDEM / SOLO Vanity pattern: 4” & 8” drawers 15
32” vanity STANDARD Vanity pattern: 4” & 8” drawers 16
32” vanity TANDEMBOX Vanity pattern: 358M drawers 17
28-1/4” desk All Line bore pattern for all desk cabinets 18
28-1/4” desk All Desk types with cross rail positions 19
28-1/4” desk All Desk door and drawer front heights 20
28-1/4” desk METABOX Desk pattern, 320H, 320M& 320N 21
28-1/4” desk TANDEM / SOLO Desk pattern: 3”, 4”, 8” & 10” drawers 22
28-1/4” desk STANDARD Desk pattern: 3”, 4”, 6” & 10” drawers 23
28-1/4” desk TANDEMBOX Desk pattern: 358M drawers 24
Wall cabinets Wall pattern: 30-1/2”, 28”, 24-3/16” 25
Wall cabinets Wall pattern: 20-7/16”, 16-5/8”, 12-7/8” 26
Standardization for effi cient cabinet production
• One line bore pattern works with all eight of Blum’s
drawer systems.
• Hinge drilling positions are balanced on all doors.
• Drawer front heights are optimized.
• Cross rails can be placed between all drawers.
• 3/4” or 5/8” panel thickness can be used.
• Clearance for BLUMOTION closing mechanisms on
TANDEM and TANDEMBOX drawers is provided.
Table of Contents
Revised 4/12/04
Base 34-1/2"
Vanity32"
Desk 28-1/4"
Wall30-1/2"
Wall28"
Wall24-3/16"
Wall20-7/16"
Wall16-5/8"
Wall12-7/8"
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
93 517
37
610 (24")
46.5
672
(22
hole
s)56
.5
Ø 5 typ.
19 (
3/4"
)
Base bore pattern for all Blum runners 1:8023/25/03 1
19 (
3/4"
)
102
(4")
775
(30
1/2"
)
775
(30
1/2"
)
76 192 37
305 (12")
76 192 37
305 (12")
Standard 24" base cabinet Shallow 12" base cabinet 30-1/2" wall cabinet
32 c
. to
c. ty
p.
224
Center row of holes req'd. for TANDEMBOX
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 Base cabinet types 1:8023/25/04 2
293
161.
516
1.5
159
(D) 4 drawers
283.
5
445
606.
5
(A) 1 door
System hole locations for hinge mounting plate- Measured from bottom of cabinet side
< Reveal dimensions Front dimensions
62.5
640
62.5
765(30-1/8")
< 10 (3/8")
46.578.5
686.5718.5
102
(4")
775
(30
1/2"
)
616
159
(B) 1 drawer, 1 door
606.
5
19 (
3/4"
)
326.
528
9.5
159
(C) 3 drawers
317
606.
5
Cross rail positions
Centerline dimension of cross rails if material other than 3/4" is used
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door
285(11-1/4")
157(6-3/16")
157(6-3/16")
157(6-3/16")
317(12-1/2")
285(11-1/4")
157(6-3/16")
157(6-3/16")
765(30-1/8")
102
(4")
775
(30
1/2"
)
(A) 1 door
Base cabinet door & drawer front heights 1:8012/21/03 3
Reveal dimensions
Cabinet
10 (3/8") 10 (3/8")
3 (1/8")
10 (3/8")
3 (1/8")
10 (3/8")
3 (1/8")
3 (1/8")
3 (1/8")3 (1/8")605
(23-13/16")
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 METABOX base pattern - all 320M 1:8023/25/04 4
317(12-1/2")
285(11-1/4")
(C) 3 drawers
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
3864320M
285(11-1/4")
(D) 4 drawers
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
38
157(6-3/16")
38
157(6-3/16")
3864320M
64320M
64320M
62.5
480
62.5
605(23-13/16")
(B) 1 drawer, 1 door
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
3864320M
C, D -110.5
D - 398.5
D - 558.5
B, C, D - 718.5
C - 430.5
System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole
< Reveal dimensions Front heights
526.5558.5
46.578.5
Optional galleries
Optional galleries
3838
3864320M
6464
64320M
6464
64320M
6464
Optional galleriesOptional galleries
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 METABOX base pattern - 320M & 320H 1:8023/25/04 5
62.5
480
62.5
605(23-13/16")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
38
46.578.5
526.5558.5
64320M
317(12-1/2")
285(11-1/4")
(C) 3 drawers
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
3864320M
285(11-1/4")
(D) 4 drawers
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
38
157(6-3/16")
38
157(6-3/16")
3864320M
64320M
64320M
(B) 1 drawer, 1 door
C, D -174.5
D - 398.5
D - 558.5
B, C, D - 718.5
C - 494.5
System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole
< Reveal dimensions Front heights
64320H
6464320H
64
64320H
6410
2
102
102
Optional galleries
Optional galleries
Optional galleries
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
D - 334.5
D - 494.5
B, C, D - 654.5
C - 366.5
C, D - 46.5
TANDEM / SOLO pattern 1:8023/25/04 6
62.5
480
62.5
605(23-13/16")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")10
2(4
")
24
Use lower holes on bottom drawers only
Upper
Lower
Runner mounting holesSystem hole location for cabinet profile- Measured from bottom of cabinet side
526.5558.5
46.578.5
317(12-1/2")
285(11-1/4")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")10
2(4
")
24
203
(8")
36
203
(8")
24
285(11-1/4")
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
157(6-3/16")
157(6-3/16")
102
(4")
24
102
(4")
24
203
(8")
36
102
(4")
24
Drawer box heightBox to front dimension
(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door
Tilt top drawer slightly toinstall & remove when
using SOLO runners
< Reveal dimensions Front heights
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
D - 334.5
D - 494.5
B, C, D - 654.5
C - 366.5
C, D - 46.5
STANDARD runners base pattern 1:8023/25/04 7
62.5
480
62.5
605(23-13/16")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")10
2(4
")
32
526.5558.5
46.578.5
System hole location for cabinet profile- Measured from bottom of cabinet side- For 430 series use next highest hole
Drawer box heightBox to front dimension
317(12-1/2")
285(11-1/4")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
203
(8")
32
203
(8")
32
102
(4")
32
285(11-1/4")
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
157(6-3/16")
157(6-3/16")
203
(8")
32
102
(4")
32
102
(4")
32
102
(4")
32
(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door
Tilt top drawer slightly to install & remove
< Reveal dimensions Front heights
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
62.5
480
62.5
605(23-13/16")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
61526.5558.5
46.578.5
System hole location for cabinet profile- Measured from bottom of cabinet side
C, D - 58.5
D - 334.5
D - 494.5
B, C, D - 654.5
C - 366.5
TANDEMBOX base pattern 1:8043/25/04 8
317(12-1/2")
285(11-1/4")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
61
285(11-1/4")
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
157(6-3/16")
157(6-3/16")
6161
6132358M
32358M
32358M
32358M32358M
6464
32358M + Gal.
(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door
< Reveal dimensions Front heights
Out of system hole see Pg. 9
7364
6432358M + Gal.
7361
6464
32358M + Gal.
Optional galleries
Optional galleries Optional galleries
Julius Blum, IncStanley, NC 281641-800-438-6788
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
58.5
The lower holes on 358M TANDEMBOX runners are not accessable. Mounting holes must be manually drilled only for the bottom drawer at 58.5mm.For accuracy make the drilling template shown.
224 37
39.5
19 (3
/4")
37224
eq.
eq.
79 (3
1/8
")
42 (1 5/8")
16 (5/8")
13 (1/2")
102
(4")
Ø 5mm (3/16") drill bushing
Drilling Template Side View Section
39.5
Template positioned in cabinet
Template for TANDEMBOX bottom drawers 3/25/03 00 1:5 9
Special drilling for bottom drawer
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
80 453
37
533 (21")
46.5
608
(20
hole
s)56
.5
19 (
3/4"
)
Vanity bore pattern for all Blum runners 1:8003/12/04 10
19 (
3/4"
)
102
(4")
711
(28"
)
357
192 37
457 (18")
Vainty cabinet - 21" deep Vanity cabinet - 18" deep
32 c
. to
c. ty
p.
224
Center row of holesreq'd. for TANDEMBOX
Ø 5 typ. Ø 5 typ.
100
813
(32"
)
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 Vanity cabinet types 1:8013/25/04 11
229
161.
516
1.5
159
(D) 4 drawers(A) 1 door
System hole locations for hinge mounting plate- Measured from bottom of cabinet side
< Reveal dimensions Front dimensions
62.5
576
62.5
701(27-5/8")
< 10 (3/8")
46.578.5
622.5654.5
102
(4")
711
(28"
)
552
159
(B) 1 drawer, 1 door
19 (
3/4"
)
294.
525
7.5
159
(C) 3 drawers
Cross rail positions
285
542.
5
219.
5
381
542.
5
542.
5
Centerline dimension of cross rails if material other than 3/4" is used
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
(C) 3 drawers (D) 4 drawers(B) 1 drawer, 1 door
102
(4")
711
(28"
)
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 METABOX vanity pattern - all 320M 1:8024/12/04 13
253(9-15/16")
285(11-1/4")
(C) 3 drawers
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
3864320M
221(8-11/16")
(D) 4 drawers
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
38
157(6-3/16")
38
157(6-3/16")
38
62.5
416
62.5
541(21-5/16")
(B) 1 drawer, 1 door
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
3864320M
C, D -110.5
C - 398.5
D - 494.5
B, C, D - 654.5
D - 334.5
System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole
< Reveal dimensions Front heights
462.5494.5
46.578.5 64320M
6438
64320M
64320M
64320M
Optional galleries
Optional gallery
64320M
6464
64320M
6464
3838
Optional galleries
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 METABOX vanity pattern - 320M and H 1:8024/12/04 14
253(9-15/16")
285(11-1/4")
(C) 3 drawers
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
3864320M
221(8-11/16")
(D) 4 drawers
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
38
157(6-3/16")
38
157(6-3/16")
38
62.5
416
62.5
541(21-5/16")
(B) 1 drawer, 1 door
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
3864320M
C, D -174.5
C - 398.5
D - 494.5
B, C, D - 654.5
D - 334.5
System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole
< Reveal dimensions Front heights
462.5494.5
46.578.5
64320M
64320M
64320M
64320H
64320H
64320H
102
102
102
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 TANDEM / SOLO vanity pattern 1:8024/12/04 15
253(9-15/16")
285(11-1/4")
(C) 3 drawers
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
221(8-11/16")
(D) 4 drawers
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
157(6-3/16")
62.5
416
62.5
541(21-5/16")
(B) 1 drawer, 1 door
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
C, D - 46.5
C - 334.5
D - 430.5
B, C, D - 590.5
D - 270.5
System hole location for cabinet profile.- Measured from bottom of cabinet side.
< Reveal dimensions Front heights
462.5494.5
46.578.5
157(6-3/16")
203
(8")
36
203
(8")
24
102
(4")
24
102
(4")
24
102
(4")
24102
(4")
24
152
(6")
36
102
(4")
24
Use lower holes on bottom drawers only
Upper
Lower
Runner mounting holes
Tilt top drawer slightly toinstall & remove when
using SOLO runners
Drawer box heightBox to front dimension
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 Standard runners vanity pattern 1:8024/12/04 16
253(9-15/16")
285(11-1/4")
(C) 3 drawers
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
221(8-11/16")
(D) 4 drawers
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
157(6-3/16")
62.5
416
62.5
541(21-5/16")
(B) 1 drawer, 1 door
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
C, D - 46.5
C - 334.5
D - 430.5
B, C, D - 590.5
D - 270.5
< Reveal dimensions Front heights
462.5494.5
46.578.5
157(6-3/16")
Drawer box heightBox to front dimension
102
(4")
32 102
(4")
32 102
(4")
32
102
(4")
32
102
(4")
32
203
(8")
32
203
(8")
32
152
(6")
32
System hole location for cabinet profile- Measured from bottom of cabinet side- For 430 series use next highest hole
Tilt top drawer slightly to install & remove
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 TANDEMBOX vanity pattern 1:8013/25/04 17
253(9-15/16")
285(11-1/4")
(C) 3 drawers
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
221(8-11/16")
(D) 4 drawers
< 3 (1/8")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
157(6-3/16")
62.5
416
62.5
541(21-5/16")
(B) 1 drawer, 1 door
< 3 (1/8")
< 10 (3/8")
157(6-3/16")
C, D - 58.5
C - 334.5
D - 430.5
B, C, D - 622.5
D - 270.5
< Reveal dimensions Front heights
462.5494.5
46.578.5
157(6-3/16")
32358M 32358M 32358M
32358M
32358M
358M + Gal.
6432
73
Out of system hole see Pg. 9
61 61 6161
61
Optional galleries
Optional gallery
Optional galleries
6464
32358M + Gal.
6464
32358M + Gal.
7361
System hole location for cabinet profile- Measured from bottom of cabinet side
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
93 517
37
610 (24")
46.5
608
(20
hole
s)56
.5
19 (
3/4"
)
Desk bore pattern for all Blum runners 1:8003/26/04 18
19 (
3/4"
)
102
(4")
615
(24
3/16
")
Desk cabinet - 24" deep
32 c
. to
c. ty
p.
224
717
(28
1/4"
) Ø 5 typ.
Center row of holesreq'd. for TANDEMBOX
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 Desk cabinet types 1:8003/25/04 19
(A) 1 door
System hole locations for hinge mounting plate- Measured from bottom of cabinet side
< Reveal dimensions Front dimensions
62.5
480
62.5
605(23-13/16")
< 10 (3/8")
46.578.5
102
(4")
615
(24
3/16
")
339.
527
5.5
(B) 2 drawers
349
19 (
3/4"
)
339.
512
814
7.5
(C) 3 drawers34
9
477
Cross rail positions
Centerline dimension of cross rails if material other than 3/4" is used
686.5718.5
147.
516
014
7.5
(C) 4 drawers
157
477
160
317
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788
(C) 3 drawers(B) 2 drawers
253(9-15/16")
605(23-13/16")
102
(4")
615
(24
3/16
")
(A) 1 door
Desk cabinet door & drawer front heights 1:8003/25/04 20
Reveal dimensions
Cabinet
10 (3/8") 10 (3/8")
3 (1/8")
125(4-15/16")
10 (3/8")
3 (1/8")
349(13-3/4")
349(13-3/4")
125(4-15/16")3 (1/8")
(D) 4 drawers
10 (3/8")
3 (1/8")
157(6-3/16")
125(4-15/16")3 (1/8")
157(6-3/16")
157(6-3/16")
3 (1/8")
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 METABOX desk pattern 1:8003/25/04 21
(C) 3 drawers (D) 4 drawers(B) 2 drawers
< 10 (3/8")
D -110.5
C, D - 558.5
C, D - 430.5
System hole location for cabinet profile.- Measured from bottom of cabinet side.- To use 330 full extension versions, use next lowest hole (H and M drawers only)
< Reveal dimensions Front heights
102
64320H
96.5
32
241
< 3 (1/8")
102
64320H
96.5
32
241
32320N125
(4-15/16")
38
125(4-15/16")
3832320N
64320H10
2
349(13-3/4")
253(9-15/16")
< 3 (1/8")
< 3 (1/8")
125(4-15/16")
3864320M
64320M
157(6-3/16")
38
157(6-3/16")
3864320M
157(6-3/16")
38 < 3 (1/8")
< 3 (1/8")
< 10 (3/8") < 10 (3/8")
32320N
B, C -174.5
D -270.5
B - 526.5
349(13-3/4")
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 TANDEM / SOLO desk pattern 1:8003/25/04 22
(C) 3 drawers (D) 4 drawers(B) 2 drawers
< 10 (3/8")
B, C, D -46.5
B, C - 398.5
< Reveal dimensions Front heights
< 3 (1/8")
125(4-15/16")
349(13-3/4")
253(9-15/16")
< 3 (1/8")
< 3 (1/8")
125(4-15/16")
157(6-3/16")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8") < 10 (3/8")
D -206.5
C, D - 526.5
125(4-15/16")
< 3 (1/8")
157(6-3/16")
157(6-3/16")
349(13-3/4")
203
(8")
2425
4(1
0")
36
254
(10"
)
36
76 (3")
24
76 (3")
24 76 (3")
24
102
(4")
24
102
(4")
24
102
(4")
36
D - 366.5
Use lower holes on bottom drawers only
Upper
Lower
Runner mounting holes
Tilt top drawer slightly toinstall & remove when
using SOLO runners
Drawer box heightBox to front dimension
System hole location for cabinet profile.- Measured from bottom of cabinet side.
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 Standard runner desk pattern 1:8003/25/04 23
(C) 3 drawers (D) 4 drawers(B) 2 drawers
< 10 (3/8")
B, C, D -46.5
B, C - 398.5
< Reveal dimensions Front heights
< 3 (1/8")
125(4-15/16")
349(13-3/4")
253(9-15/16")
< 3 (1/8")
< 3 (1/8")
125(4-15/16")
157(6-3/16")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8") < 10 (3/8")
D -206.5
C, D - 526.5
125(4-15/16")
< 3 (1/8")
157(6-3/16")
157(6-3/16")
349(13-3/4")
D - 366.5
Drawer box heightBox to front dimension
102
(4")
32
102
(4")
32
102
(4")
32
76 (3")
32
76 (3")
32
76 (3")
32
254
(10"
)
32
254
(10"
)
32
152
(6")
32
System hole location for cabinet profile- Measured from bottom of cabinet side- For 430 series use next highest hole
Tilt top drawer slightly to install & remove
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 TANDEMBOX desk pattern 1:8003/25/04 24
(C) 3 drawers (D) 4 drawers(B) 2 drawers
< 10 (3/8")
B, C - 398.5
< Reveal dimensions Front heights
< 3 (1/8")
125(4-15/16")
349(13-3/4")
253(9-15/16")
< 3 (1/8")
< 3 (1/8")
125(4-15/16")
157(6-3/16")
< 3 (1/8")
< 3 (1/8")
< 10 (3/8") < 10 (3/8")
D -206.5
C, D - 526.5
125(4-15/16")
< 3 (1/8")
157(6-3/16")
157(6-3/16")
349(13-3/4")
D - 366.5
B, C, D - 58.5
Out of system hole see Pg. 9
3212
8
358M + Gal.
61
32358M
32358M
32358M
32358N32358N
32358N
6161
464646
73 73
358M + Gal.
6432
3296
358M + Gal.
6432
3296
System hole location for cabinet profile- Measured from bottom of cabinet side
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 Wall cabinet patterns 1:8003/29/04 25
775
(30
1/2"
)
76 192 37
305 (12")
30-1/2" wall cabinet
62.5
640
62.5
765(30-1/8")
< 10 (3/8")
46.578.5
686.5718.5
62.5
576
62.5
701(27-5/8")
< 10 (3/8")
46.578.5
622.5654.5
22 h
oles
20 h
oles
711
(28"
)
62.5
480
62.5
605(23-13/16")
< 10 (3/8")
46.578.5
526.5558.5
17 h
oles
615
(24
3/16
")
28" wall cabinet 24-3/16" wall cabinet
Drawing No.Date Author
Subject to technical modifications without noticeDimension in millimeters, inch equivalents as noted
Page No.ScaleIndexDescription
BUS0126MLY
®
Blum, IncStanley, NC 281641-800-438-6788 Wall cabinet patterns 1:8003/29/04 26
20-7/16" wall cabinet 16-5/8" wall cabinet 12-7/8" wall cabinet
62.5
384
62.5
509(20-1/16")
< 10 (3/8")
46.578.5
430.5462.5
14 h
oles
519
(20
7/16
")
62.5
288
62.5
413(16-1/4")
< 10 (3/8")
46.578.5
334.5366.5
11 h
oles
423
(16
5/8"
)
62.5
192
62.5
317(12-1/2")
< 10 (3/8")
46.578.5
238.5270.5
8 ho
les
327
(12
7/8"
)
Recommended