View
212
Download
0
Category
Preview:
Citation preview
Alexis KnippingProf: Kate HartmanGDES 3B44September 17, 2014
Beautiful Circuit Documentation
For this project I wanted to dive right into using the Arduino LilyPad. I
wanted the piece to have LED lights that would fade in and out at different
intervals so that when the lights are off around the piece, the LED’s cast
interesting shadows on the different ridges within the structure of the bodice. My
circuit is completed using conductive thread to attach the components to one
another. The LED’s are sewn in Parallel to one another to ensure each LED
receives enough power (perhaps its overkill but why not). For the structure of the
bodice itself I worked out of the pattern-drafting book Pattern Magic 2 which
allowed me to produce an interesting accordion shape that creates negative
space for the electronics to reside within.
Components. Arduino LilyPad part number: LILYP-398328 2 ply Conductive thread Lillypad battery pack with switch part number:0567-SPF 3 white LED’s with resistors part number: APT3216QWF/D 1.5 metres red cotton fabric One zipper
All electronic components were purchased from Creatron.
Images
Circuit Layout Illustration
Circuit Schematic
Recommended