View
1
Download
0
Category
Preview:
Citation preview
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 1
BL67 – Table of Contents
BL67 – GatewaysDeviceNet™ 14PROFIBUS®-DP 16
BL67 – Electronic and Base ModulesPower Feeder Module 18Digital Input Modules 20Digital Output Modules 24Analog Input Modules 28Resistive Thermal Device Input Module 30Thermocouple Input Module 32Analog Output Modules 34Serial Interface Module 36
BL67 – AccessoriesI/Oassistant Software 38BL67 – Labels 39BL67 – Manuals 39BL67 – Programming Cable 39
BL67 – System Concept 2BL67 – Module Key 4Quick Selection Guide 5
BL67 – GeneralSystem Description – BL67 and PROFIBUS®-DP 6System Description – BL67 and DeviceNet™ 8BL67 – Power Distribution 10BL67 – Dimensions 12BL67 – Environmental Conditions 13
2
3
1
5 Installations 105
Flexlife®10 Performance 106Cable Bundling Techniques 107Cable Installation 108
Cable and AccessoriesDeviceNet™ 41Power Cordsets for DeviceNet™ 72Power Field Wireables for DeviceNet™ 75PROFIBUS®-DP 77Power Cordsets for PROFIBUS®-DP 89Power Field Wireables for PROFIBUS®-DP 91I/O Cordsets 93Cable Characteristics 103
4
Index of Components 110
Warranty Statement 112
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-58802
The BL67 Concept
The BL67 modular concept is a very flexibleapproach to connectorized I/O; the gateway,base, and electronic module combine manybenefits. I/O modules are not dependent on thefieldbus protocol with the BL67 gateway. Thegateway provides communication between thefieldbus and the I/O modules. The DIN-rail, orframe mountable base modules, are availablewith eurofast®, minifast® and picofast® connec-tors. The electronic modules are hotswappable. The power distribution module (24VDC) supplies the connected I/O with therequired voltage. The system supports multiplenetworks and a wide variety of I/O signals in acompact and rugged housing. The BL67’sstrengths are its openness, flexibility,connectorization and ruggedness.
Gateway
• Interface between the BL67 station and the fieldbus
• Supports PROFIBUS®-DP and DeviceNet™
• Coordinates the entire I/O data exchange
• Generates detailed diagnostic information for the PLC
• Provides I/Oassistant configuration and monitoring software interface
• Provides rotary switches for setting network address
• The I/O modules are independent of the bus system
DeviceNet™
Address Window
The BL67 Solution
BL67 combines all the flexibility of in the cabinet PLC I/O systems, with modularity,ruggedness, and connectorization. BL67 is a complementary product to the AIM™,BL20, and piconet® product families to meet the needs of unique applications such assmall machine or conveyor systems requiring IP67 protection.
Gateway
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 3
Connectorized Base Modules
• Available in eurofast®, minifast® or picofast® connectors
• Eliminates wiring errors
• Greatly reduces wiring time and cost
Electronic Modules
• Available in digital, analog, temperature, RS232/485 and more
• Communicate with the gateway via an internal bus
• Independent of the higher-level fieldbus
• Replaceable without removing I/O wiring
• Available with 2, 4 or 8 channels
• Color coded for easy identification
Software I/Oassistant
• Project planning
• Documentation
• Configuring BL67 Station
• Monitoring I/O data
• Error logging
Mechanical Key
• Keys an electronic module to a particular base module
• Prevents insertion of incorrect electronic module
Power Feeder Modules
• Supplies isolated 24VDC to electronic modules
• Create isolated groups of I/O
Base Module
Electronic ModuleLED’s
1
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-58804
BL67 – Module Key
BL67 – Gateways
BL67 – Base Modules
B L 6 7 – 2 A I
Signal Number
Signal Type:AI = Analog InputAO = Analog OutputDI = Digital InputDO = Digital Outputetc.
– P
Additional Information:V = VoltageI = CurrentPT = Pt100, Pt1000, Ni100 etc.TC = ThermocoupleP = Paired
BL67 – Electronic Modules
B L 6 7 – B – 2 M 1 2
B Base Module
Connector Number:2/4/8
Connector Type:M8 = picofast®M12 = eurofast®
RSM = minifast®
– P
Wiring:P Paired8 8-pin
B L 6 7 – G W – DP
G W Gateway DP PROFIBUS®-DPDN DeviceNet™
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 5
1
BL67 – Quick Selection Guide
BL67 – Electronic modules andcorresponding bases
BL6
7-B
-4M
8
BL6
7-B
-8M
8
BL6
7-B
-1R
SM
BL6
7-B
-1M
12
BL6
7-B
-1M
12-8
BL6
7-B
-2M
12
BL6
7-B
-2M
12-P
BL6
7-B
-4M
12
BL6
7-B
-4M
12-P
Bas
e M
od
ule
s
Pag
e
Digital Input Modules
BL67-4DI-P 20
BL67-8DI-P 22
Analog Input Modules
BL67-2AI-I 28
BL67-2AI-V 28
BL67-2AI-PT 30
BL67-2AI-TC 32
Digital Output Modules
BL67-4DO-0.5A-P 24
BL67-4DO-2A-P 24
BL67-8DO-0.5A-P 26
Analog Output Modules
BL67-2AO-I 34
BL67-2AO-V 34
Serial Interface Module
BL67-1RS232 36
Power Feeder Module
BL67-PF-24VDC 18
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-58806
BL67 and PROFIBUS®-DP
System Description
PROFIBUS®, or “Process Field Bus”, is a standardized, open communication network. It complies with the DIN 19 245 standard andconsists of three different protocol profiles:
PROFIBUS®-FMS (Fieldbus Message Specification) is designed to handle the data exchange between PLC’s or PC-based controllers.InterlinkBT® stations are designed to support PROFIBUS®-DP, not FMS.PROFIBUS®-PA (Process Automation) is an intrinsically safe network for the process industry. InterlinkBT I/O stations do not supportPA.PROFIBUS®-DP (Decentralized Periphery) is designed to handle the data exchange between PLC’s and their I/O. InterlinkBT stationssupport PROFIBUS®-DP.PROFIBUS®-DP operates as a master slave system. It usually consists of a single Master (PLC) and from 4 to 30 or more slaves (I/OBlocks). When the system is running, the master simply polls each slave in sequence. It is possible to have multiple masters on anetwork. The masters then share the network by passing a token.PROFIBUS®-DP uses an industrially proven physical layer based on the RS-485 standard. It is a two-wire differential system that isextremely resistant to electrical interference. At 12 Mbps it’s the fastest in its class.PROFIBUS®-DP can accommodate a large number of I/O points. With up to 126 addressable nodes, systems may have thousandsof analog and digital I/O points per network.Every PROFIBUS®-DP device has a Device Master File (GSD File) associated with it. This file contains detailed information about thedevice, including: I/O data size, comm rates supported, revision, etc. To configure a station within a PROFIBUS®-DP system a GSD Filefor that station is required. GSD files are available at www.interlinkbt.com.InterlinkBT stations and cordsets are certified by the Profibus Trade Organization (PTO).
Maximum System Extension without Repeaters
A PROFIBUS®-DP bus line consists of at least a master anda slave. Without a repeater, a PROFIBUS®-DP bus line canconsist of up to 31 slaves.
Maximum System Extension with Repeaters
Repeaters can be used within a PROFIBUS®-DP structure.This increases the number of possible slaves to 122. Do notexceed the maximum number of 125 bus stations. ThePROFIBUS®-DP addresses 000, 126 and 127 are reservedand cannot be used for BL67.
A maximum of 32 devices can be connected on aPROFIBUS®-DP segment. A repeater allows 31 more devicesto be connected (32-1: the repeater itself is a device). Up to 4repeaters can be used on any network. In some cases,master timing characteristics may need to be adjusted.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 7
2
PROFIBUS®-DP
Maximum Size of the BL67 Station
A BL67 station consists of a gateway for PROFIBUS®-DP anda maximum of 32 modules (approximately 1 meter of din rail).
When using mixed systems (digital, analog, and serial modules together in one system), determining the number of modules thatare supported can become complicated. Maximum system size depends on a number of factors, such as : overall I/O data size,diagnostic data size, parameterization (or configuration) data size, and power requirements.
To determine exactly if a given system will work:1) Build the system using the I/Oassistant software2) Click on “Station” and then “Verify”The I/Oassistant will return “No Error” if the configuration is within total limits.
To quickly estimate if a system will work:Add up the fractional usage of each module. For example, consider a system with the following: 10 of the 8 DI modules 2 of the 1 RS232 modules 8 of the 2 AI-TC modules
- For the 8 DI we are using 10 out of 32 possible or 31.2 % of the total system resources- For the 1 RS232 we are using 2 out of 15 possible or 13.3% of the total system resources- For the 2 AI-TC modules we are using 8 out of 30 possible or 26.6% of the total system recources
Adding all the percentages together equals 71.1% which is less than 100%; this system will work.
Note: This simple aproach is a worst case approximation. Often you can build a system slightly larger than shown by this “esti-mate”. Use the I/Oassistant to determine the exact system limitations.
Maximum Station Extension,Based on Diagnostic Data Limits
Digital inputs, 8 DIDigital outputs, 8 DOAnalog inputs, 2 AIAnalog inputs, 2 AI-PTAnalog inputs, 2AI-TCAnalog outputs, 2 AO1RS232
Module TypeChannelMaximum
ModuleMaximum
2562566046603215
32323023301615
Maximum Station Extension,Based on I/O Data Limits
Digital inputs, 8 DIDigital outputs, 8 DOAnalog inputs, 2AIAnalog inputs, 2 AI-PTAnalog inputs, 2 AI-TCAnalog outputs, 2 AO1RS232
2562566446643215
32323223321615
Module TypeChannelMaximum
ModuleMaximum
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-58808
BL67 and DeviceNet™
System Description
DeviceNet is a low-cost communications link to connect industrial devices such as limit switches, photoelectric sensors, valvemanifolds, motor starters, process sensors, bar code readers, variable frequency drives, panel displays and operator interfacesto a network and eliminate hard wiring. The direct connectivity provides improved communication between devices as well asimportant device-level diagnostics not easily accessible or available through hard-wired I/O interfaces.
DeviceNet is based on a broadcast-oriented communication architecture - the Controller Area Network (CAN). CAN uses theCSMA/BA bus arbitration method. CSMA/BA assures that the highest priority message always gets transmitted. TheDeviceNet protocol further defines message priorities such that I/O messages are given top priority and configuration mes-sages have lower priority.
A DeviceNet network supports up to 64 nodes and an unlimited amount of I/O. The bus uses a trunkline-dropline topology. Buspower and communication are supplied on a single cable. Bus power is 24 VDC and supplies current to operate the node aswell as current to power input devices. Some InterlinkBT® stations require an additional 24 VDC auxiliary power to supplycurrent for the outputs.
DeviceNet allows for Peer-to Peer data exchange (in which a DeviceNet product can produce and consume messages) andMaster/Slave operation (called the Predefined Master/Slave Connection Set).
Maximum System Extension
The branches can be up to 6 meters (20 ft) long, but thetotal length of all branches depends on the baud rate.A DeviceNet bus line consists of a scanner and at leastanother device. Do not exceed the maximum number of 64devices (including the scanner).
Mixed Operation with Other Devices
Within a DeviceNet structure, BL67 can be used in conjunc-tion with standardized DeviceNet fieldbus devices fromvarious manufacturers.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 9
2
DeviceNet™
Maximum size of the BL67 station
A BL67 station consists of a gateway forDeviceNet and a maximum of 32 electronicmodules (approximately 1 meter of din rail,including end bracket and end plate).
When using mixed systems (digital, analog, and serial modules together in one system), determining the number of modules thatare supported can become complicated. Maximum system size depends on a number of factors, such as : overall I/O data size,diagnostic data size, parameterization (or configuration) data size, and power requirements.
To determine exactly if a given system will work:1) Build the system using the I/Oassistant software2) Click on “Station” and then “Verify”The I/Oassistant will return “No Error” if the configuration is within total limits.
To quickly estimate if a system will work:Add up the fractional usage of each module. For example, consider a system with the following: 10 of the 8 DI modules 2 of the 1 RS232 modules 8 of the 2 AI-TC modules
- For the 8 DI we are using 10 out of 32 possible or 31.2 % of the total system resources- For the 1 RS232 we are using 2 out of 15 possible or 13.3% of the total system resources- For the 2 AI-TC modules we are using 8 out of 32 possible or 25% of the total system recources
Adding all the percentages together equals 69.5% which is less than 100%; this system will work.
Note: This simple aproach is a worst case approximation. Often you can build a system slightly larger than shown by this “esti-mate”. Use the I/Oassistant to determine the exact system limitations.
Digital inputs, 8 DIDigital outputs, 8 DOAnalog inputs, 2 AIAnalog outputs, 2 AO-IAnalog outputs, 2 AO-V1RS232
Module TypeChannelMaximum
ModuleMaximum
25625664645015
323232322515
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588010
BL67 Power Distribution
Power Overview
The power supply to a BL67 station is fed via the powerconnector on the PROFIBUS® gateway or directly from thenetwork on the DeviceNet™ gateway.Power feeder modules can be added to the system at anypoint. Power feeder modules will provide a fresh isolated supplyof power to all I/O connected to their right.
Internal Power Consumption Via Module Bus
The number of BL67 modules that can be supplied via theinternal module bus depends on the respective nominalcurrent IMB of the individual modules on the module bus. Thesum total of the nominal current inputs of the connected BL67modules must not exceed 1.5 A. If the I/Oassistant softwareis used, an error message is generated automatically via the<Station - Verify> as soon as the system supply via themodule bus is no longer sufficiently guaranteed.
1) The sum of these currents must be less than 1.5 amps. This is only a concern when using the 1RS232 electronic module.2) The sum of these currents is drawn from DeviceNet, or VI on the PROFIBUS® gateway.3 & 4) The sum of these currents are drawn from the gateway or power feeding module.
Nominal Current Consumption
The following table offers an overview of the nominal internal current consumption of the different BL67 types on the module bus:
To calculate current draw on DeviceNet:-Add IMB(24) for all modules, then add VI and VO for electronic modules to the left of the first power feed module.-Then add the current draw of the I/O devices.
To calculate current draw on PROFIBUS® Gateway power connector for VI:-Add IMB for all modules, then add VI current for all modules to the left of the first power feed module.-Then add the current draw of the input devices.
For VO add the VO current for all modules to the left of the first power feed module.-Then add the current draw of output devices themselves.
VMB = Module Bus PowerVI = Input PowerVO = Output PowerIMB = Module Bus CurrentIMB(24) = Effective Current Draw from Gateway at 24 VDC Supply
Module Nominal 1)Current at 5 V IMB
Gateway PROFIBUS®-DPGateway DeviceNet™
BL67-PF-24VDCBL67-4DI-PBL67-8DI-PBL67-4DO-0.5A-PBL67-4DO-2A-PBL67-8DO-0.5A-PBL67-2AI-VBL67-2AI-IBL67-2AI-TCBL67-2AI-PTBL67-2AO-IBL67-2AO-VBL67-1RS232
- -< 30 mA< 30 mA< 30 mA< 30 mA< 30 mA< 30 mA< 35 mA< 35 mA< 35 mA< 45 mA< 40 mA< 60 mA< 100 mA
Effective Draw 2)from Gateway at 24VDC IMB (24)
Nominal 3)Current from VI
Nominal 4)Current from VO
<150 mA<100 mA< 9 mA< 9 mA< 9 mA< 9 mA< 9 mA< 9 mA< 10 mA< 10 mA< 10 mA< 13 mA< 12 mA< 17 mA< 28 mA
< 12 mA< 12 mA< 30 mA< 45 mA
< 50 mA
< 100 mA< 100 mA< 100 mA
< 40 mA< 40 mA
< 50 mA< 50 mA
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 11
2
BL67 Power Distribution
DeviceNet™ System
System Power
Field Power
PROFIBUS® System
System Power
Field Power
A power feeder module provides a newisolated power segment for all modules toits right.
VI, Vo, VMB from Poweron Gateway
VMB(5V)
VI Vo
4A
VOVI
4A
Isolation of Field Power VI, VO
VMB(24V)
IMB(5V)
IMB(24V)II
IO
II
IO
VI, VO, VMBfrom DeviceNet
VI Vo
4A
VoVI
4A
Isolation of Field Power VI, VO
A power feeder module provides a newisolated power segment for all modules toits right.
VMB(5V)
VMB(24V)
IMB(5V)
IMB(24V) II
IO
II
IO
VMB = Module Bus PowerVI = Input PowerVO = Output Power
IMB(5V) < 1.5AII < 4A (protected)
IO < 8A
VMB = Module Bus PowerVI = Input PowerVO = Output Power
IMB(5V) < 1.5AII < 4A (protected)
IO < 8A
Isolation
Isolation
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588012
Dimensions
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 13
2
Environmental Conditions
General Environmental
via optocoupler32 °F to +131 °F (0 to +55 °C)-13 °F to +185 °F (-25 to +85 °C)5 to 95 % (indoor), noncondensing1.0g 5-100Hz15gIP 67, NEMA 1, 3, 4, 12, 13according to EN 61131-2PC-V0 (Lexan), Nickel plated brass
Potential isolationOperating temperatureStorage temperatureRelative humidityVibrationShockProtection classElectromagnetic compatibility (EMC)Housing Material
Not Intended for these Environments
• Continuous submersion
• 100 percent humidity
• Outdoors
• High pressure washdown
Intended Application Environments
• The BL67 does not need an enclosure
• Mount directly on machine or conveyor
• Rugged design provides protection against dirt, dust, and liquids
CEUL (Pending)CSA (Pending)
Approvals
NOTE: For higher levels of protection consider fully potted AIM™ stations
14 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - GatewaysDeviceNet™
Gateway overview
• The gateway connects the BL67 station to DeviceNet• The gateway exchanges data between the BL67 station and the DeviceNet scanner• The connection to DeviceNet is made via a 5-pin minifast® connector• LEDs indicate supply voltage, group diagnostics and bus errors• End plate included
BL67 DeviceNet™ Gateway BL67-GW-DN
Supply voltagePermissible rangeNominal current consumptionService interfaceConnection technology fieldbusTransmission speedDeviceNet address set usingDeviceNet address range
24 VDC (from DeviceNet)11-26 VDC100 mA (see page 10 for details)PS/2 socketminifast® IP67 connector125/250/500/kBits/s2 rotary switches0 to 63
15InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - GatewaysDeviceNet™ - Pinout and Accessories
Cordset: Male and Female minifast®
connectors use RSM RKM 579-*M
Tee: Male and Female minifast®
connectors use RSM 2RKM 57
1= Shield2 = V+3 = V -4 = CAN_H5 = CAN_L
5-pin minifast®
Male Female
Through Bus
Gateway Pinout Accessories
* indicates length in meters
• Set-button: press to learn existing configuration
• Service-interface for I/Oassistant: cable part number is XN-PS2-CABLE• Rotary address switch
• Data rate switch: 125/250/500/Auto kBits/s
Settings-I/Oassistant, transfer rate, addressing
BL67-GW-DN
16 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - GatewaysPROFIBUS®-DP
Gateway Overview
• The gateway connects the BL67 station to PROFIBUS®-DP• The gateway exchanges data between the BL67 station and the PROFIBUS®-DP master• The connection to PROFIBUS®-DP is made via 2 eurofast® connectors• 3 rotary switches for setting the PROFIBUS®-DP station address (001-125)• LEDs indicate supply voltage, group or bus errors• End plate included
24 VDC via 5-pin minifast® connector18-30 VDCaccording to EN 61131-2<150 mA (see page 10 for details)PS/2 socketeurofast® IP67 connectorsmax. 12 MBit/s3 rotary switchesvia eurofast® connectors5 Bytes3 Bytes001 to 125
BL67 PROFIBUS®-DP Gateway BL67-GW-DP
Supply voltagePermissible rangeResidual rippleNominal current consumption from Vinput
Service interfaceConnection technology fieldbusTransmission speedPROFIBUS®-DP addressingPROFIBUS®-DP connectionNumber of parameter bytesNumber of diagnostic bytesAddress range for PROFIBUS®-DP
17InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - GatewaysPROFIBUS®-DP - Pinout and Accessories
Cordset: Male minifast® connector use RKM 50-*M
Tee: Male minifast® connector use RSM 2RKM 50
Wiring diagram for BL67-GW-DP
Cordset: Male and Female eurofast®
connectors use RSSW RKSW 456-*M
Tee: Male and Female eurofast®
connectors use RKSW 2RSSW 45
1 = 5 VDC2 = Bus - A3 = Bus GND4 = Bus - B5 = Shield
1 = GND2 = GND3 = PE4 = Vinputs
5 = Voutpus
5-pin eurofast®
5-pin minifast®
Gateway Pinout Accessories
Male
FemaleMale
* indicates length in meters
Settings-I/Oassistant, transfer rate, addressing
• Service-Interface for I/Oassistant: cable part number is XN-PS2-CABLE• Setting PROFIBUS® address: 1-125
BL67-GW-DN
18 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Power Distribution ModulePower Feeder Module with Diagnostics
Module overview
• Supply the field with 24 VDC• Used to create isolated I/O groups• LEDs indicate system and field supply as well as diagnostics
Power Feeder Module with Diagnostics BL67-PF-24VDC
Electronic moduleNominal voltagePermissible rangeNominal current from module bus IMB
Maximum current Voutput
Maximum current Vinput
Diagnostic data
Base module
24 VDC18 to 30 VDC< 30 mA10 Amps not limited, output electronicsmodules limit this individually4 Amps short circuit protected1 Byte (overcurrent,undervoltage Vinput,undervoltage, Voutput)BL67-B-1RSM
19InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Power Distribution ModuleBase Module, Pinout and Accessories
Cordset: Male minifast® connector use RKM 50-*M
5-pin minifast®
1= GND2= GND3= PE4= Vinputs
5= Voutputs
Male
Pinout AccessoriesBase Module
* indicates length in meters
BL67-B-1RSM
minifast®, 1 Connector
20 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Digital Input Modules4DI, 24 VDC
Module overview
• Digital input for 24VDC PNP 3-wire sensors• 4 channels, positive switching• Electronics galvanically isolated from the field level via optocoupler• LEDs for indicating status and diagnostics
Digital Input Module BL67-4DI-P
424 VDC< 40 mA< 30 mA< 250 mW
< 4.5 V7 to 9 V-20 to 5 mA< 1.5 mA2.1 to 3.7 mA
max. 1000 VDCBL67-B-2M12BL67-B-2M12-PBL67-B-4M12BL67-B-4M8
Electronic moduleNumber of channelsNominal voltage from power feed Vinput
Nominal current from power feed Vinput
Nominal current from module bus IMB
Power loss of the module, typicalInput voltage, nominal value at 24 VDC
Low levelHigh level
Input current IinLow levelHigh level
Isolation voltageUTMB (module bus/field)
Base module
21InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Digital Input ModulesBase Module, Pinout and Accessories
* indicates length in meters
5-pin eurofast® Cordset: Sensor with 2 Signals use RK 4.4T-*-RS 4.4T
Sensor with 2 Signals
Splitter: Splitter with 2 Sensors use VBRS 4.4-2RK 4T-*/*
Splitter and 2 Sensors
1= Vinput
2 = Input B3 = GND4 = Input A5 = PE
Cordset: Single Sensor use RK 4.4T-*-RS 4.4T
1= Vinput
2 = N/C3 = GND4 = Input A5 = PE
Single Sensor
5-pin eurofast®
Cordset: Single Sensor use PKG-3M-*-PSG 3M
1= Vinput
3 = GND4 = Input
3-pin picofast®
Single Sensor
BL67-B-4M8
Pinout AccessoriesBase Module
picofast®, 4 Connectors
Pinout AccessoriesBase Module
eurofast®, 4 Connectors
BL67-B-4M12
PinoutBase Module
eurofast®, 2 Connectors
BL67-B-2M12 -Standard
BL67-B-2M12-P -Paired
Accessories
22 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Digital Input Modules8DI, 24 VDC
824 VDC< 40 mA< 30 mA< 250 mW
< 4.5 V7 to 9 V-20 to 5 mA< 1.5 mA2.1 to 3.7 mA
max. 1000 VDCBL67-B-4M12BL67-B-4M12-PBL67-B-8M8
Module overview
• Digital input for 24 VDC PNP 3-wire sensors• 8 channels, positive switching• Electronics galvanically isolated from the field level via optocoupler• LEDs for indicating status and diagnostics
Digital Input Module BL67-8DI-P
Electronic moduleNumber of channelsNominal voltage from power feed Vinput
Nominal current from power feed Vinput
Nominal current from module bus IMB
Power loss of the module, typicalInput voltage, nominal value at 24 VDC
Low levelHigh level
Input current IinLow level ILHigh level IH
Isolation voltageUTMB (module bus/field)
Base module
23InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Digital Input ModulesBase Module, Pinout and Accessories
1= Vinput
2 = Input B3 = GND4 = Input A5 = PE
Cordset: Sensor with 2 Signals use RK 4.4T-*-RS 4.4T
Sensor with 2 Signals
Splitter: Splitter with 2 Sensors use VBRS 4.4-2RK 4T-*/*
5-pin eurofast®BL67-B-4M12 -Standard
BL67-B-4M12-P -Paired
Splitter and 2 Sensors
eurofast®, 4 Connectors
* indicates length in meters
Cordset: Single Sensor use PKG-3M-*-PSG 3M
1= Vinput
3 = GND4 = Input
3-pin picofast®
Single Sensor
* indicates length in meters
BL67-B-8M8
Pinout AccessoriesBase Module
Pinout AccessoriesBase Module
picofast®, 8 Connectors
24 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Digital Output Modules4 DO, 24 VDC
Digital Output Module BL67-4DO-0.5A-P BL67-4DO-2A-P
WWWWW
424 VDC< 100 mA< 30 mA< 1.5 W
min. L+ (-1 V)
0.5 A0.6 A (acc. to IEC 6 11 31-2)max. 190 m
< 3 ms< 3 ms48 to 1 k100 %
< 4 ms< 10 smin.10 s/max. 60 s
resistive and inductive loadsas well as lamp loadsmin. 483 W
200 Hz2 Hz20 HzShort circuit/per channelBL67-B-2M12BL67-B-2M12-PBL67-B-4M12BL67-B-4M8
WWWWW WWWWW
WWWWW
424 VDC< 100 mA< 30 mA< 1.5 W
min. L+ (-1 V)
2 Amax. 2.4 A (acc. to IEC 6 11 31-2)max. 50 m
< 3 ms< 3 ms12 to 1 k100 %
< 4 ms< 10 smin.10 s/max. 60 s
resistive and inductive loadsas well as lamp loadsmin. 1210 W
200 Hz2 Hz20 HzShort circuit/per channelBL67-B-2M12BL67-B-2M12-PBL67-B-4M12BL67-B-4M8
WWWWW WWWWW
WWWWW
Module overview
• Digital output, 24 VDC• 4 channels, positive switching• 0.5A or 2A rated current• Electronics galvanically isolated from the field level via optocoupler• LEDs indicate status and diagnostics
WWWWW WWWWW
Electronic moduleNumber of channelsNominal voltage from power feed Voutput
Nominal current from power feed Voutput
Nominal current from module bus IMB
Power loss of the module, typicalOutput voltage (loaded)
High levelOutput current
High level IA (nominal value)High level IAMAX
Switch-on resistance RON
Delay at signal changeand resistive load (RLO < 1 k )
from low to high levelfrom high to low levelLoad impedance range
Synchronization factorSwitching off characteristic KA
(for 4DO-0.5A) (for 4DO-0.5A) (for 4DO-0.5A) (for 4DO-0.5A) (for 4DO-0.5A) ( for 4DO-2A)( for 4DO-2A)( for 4DO-2A)( for 4DO-2A)( for 4DO-2A) IOUT > 1.5 A IOUT > 6 A 1.0 A < IOUT < 1.5 A 4 A < IOUT < 6 A 0.6 A < IOUT > 1.0 A 2.4 A < IOUT > 4 A
Load Type
Load impedance, resistive RLO
Lamp load RLL
Switching frequencyResistive loadInductive loadLamp load
Diagnostic DataBase module
25InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Digital Output ModulesBase Module, Pinout and Accessories
* indicates length in meters
Pinout AccessoriesBase Module
eurofast®, 4 Connectors
BL67-B-4M12 Cordset: Single Output use RK 4.4T-*-RS 4.4T
Field Wireable: Single Output use BS8141-0
Single Output
5-pin eurofast®
1 = Vinput
2 = N/C3 = GND4 = Output5 = PE
PinoutBase Module
eurofast®, 2 Connectors
BL67-B-2M12 -Standard
BL67-B-2M12-P -Paired
Accessories
Cordset: Dual Output use RK 4.4T-*-RS 4.4T
Splitter: Dual Output use VB2-RS 4.5T-*/2VAS 22-A528-*/* (“A” Style valve plug, other’s available)
Field Wireable: Dual Output use BS8141-0
1 = Vinput
2 = Output B3 = GND4 = Output A5 = PE
5-pin eurofast®
Dual Output
Cordset: Single Output use PKG-3M-*-PSG 3M
Field Wireable: Single Output use BS5131-0
Pinout AccessoriesBase Module
picofast®, 4 Connectors
1 = Vinput
3 = GND4 = Output
3-pin picofast®BL67-B-4M8
Single Output
26 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Digital Output Modules8 DO, 24 VDC
824 VDC<100 mA< 30 mA< 1.5 W
min. L+ (-1V)
0.5 A0.6 A (according to IEC 61131-2)max. 190 m
< 3 ms< 3 ms48 to 1k100 %
< 4 ms< 10 smin. 10 s/max. 60 sresistive and inductive loadsas well as lamp loadsmin. 48WWWWW3 W
200 Hz2 Hz20 HzShort circuit, per channelBL67-B-4M12BL67-B-4M12-PBL67-B-8M8
Electronic moduleNumber of channelsNominal voltage from power feed Voutput
Nominal current from power feed Voutput
Nominal current from module bus IMB
Power loss of the module, typicalOutput voltage (loaded)
High levelOutput current
High level IA (nominal value)High level IAMAX
Load resistance RON
Delay at signal changeand resistive load (RLO < 1 )
from low to high levelfrom high to low levelLoad impedance range
Synchronization factorSwitching off characteristic KA
IOUT > 1.5 A1.0 A < IOUT < 1.5 A0.6 A < IOUT > 1.0 A
Connectable are
Load impedance, resistive RLO
Lamp load RLL
Switching frequencyResistive loadInductive loadLamp load
Diagnostic DataBase module
Digital Output Module BL67-8DO-0.5A-P
WWWWW
Module overview
• Digital output signals 24 VDC• 8 channels, positive switching• 0.5 A rated current• Electronics galvanically isolated from the field level via optocoupler• LEDs indicate status and diagnostics
WWWWW
WWWWWWWWWW
27InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Digital Output ModulesBase Module, Pinout and Accessories
* indicates length in meters
Pinout AccessoriesBase Module
Cordset: Dual Output use RK 4.4T-*-RS 4.4T
Splitter: Dual Output use VB2-RS 4.5T-*/2VAS 22-A528-*/* (“A” Style valve plug, other’s available)
Field Wireable: Dual Output use BS8141-0
1 = Vinput
2 = Output B3 = GND4 = Output A5 = PE
5-pin eurofast®
Dual Output
Pinout AccessoriesBase Module
picofast®, 8 Connectors
Cordset: Single Output use PKG-3M-*-PSG 3M
Field Wireable: Single Output use BS5131-0
1 = Vinput
3 = GND4 = Output
3-pin picofast®
Single Output
* indicates length in meters
BL67-B-4M12-P -Paired
BL67-B-4M12 -Standard
BL67-B-8M8
eurofast®, 4 Connectors
28 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Analog Input Modules2AI-I (0/4 to 20 mAmps),2AI-V (-10/0 to +10 Volts)
Module overview
• Analog input signals• 2 channel current or voltage• Electronics galvanically isolated from the field level via optocoupler• LEDs indicate diagnostics
224 VDC< 12 mA< 35 mA< 1 W
-10/0 to +10 VDC35 V continuous> 98.5 k> 50 Hz< 0.2 %0.05 %< 150 ppm/°C from end value16 BitDelta sigma16 Bit signed integer /12 Bit signed integer left-justified /1 Byte per channel-16/12 bit data- -10 to +10V/ 0 to 10V-Suppress/enable diagnostics-Activate/deactivate channel1 Byte per channel-over/under voltage
BL67-B-2M12
Analog Input Module BL67-2AI-I
224 VDC< 12 mA< 35 mA< 1 W0/4 to 20 mA50 mA
<125> 50 Hz< 0.2 %0.05 %< 300 ppm/°C from end value16 BitDelta sigma16 Bit signed integer /12 Bit full-range left-justified1 Byte per channel-16/12 bit data- 0 to 20/4 to 20mA-Suppress/enable diagnostics-Activate/deactivate channel1 Byte per channel-Over/under current-Short circuitBL67-B-2M12
BL67-2AI-V
WWWWW W W W W W
Electronic moduleNumber of channelsNominal voltage from power feed Vinput
Nominal current from power feed Vinput
Nominal current from module bus IMB
Power loss of the module, typicalInput currentMax. input currentInput voltageMax. input voltageInput resistance (burden)Cutoff frequency (-3 dB)Basic error at 23 °CRepeat accuracyTemperature coefficientResolution of A/D converterMeasuring principleMeasurement value representation
Parameter data
Diagnostic data
Base module
29InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Analog Input ModulesBase Module, Pinout and Accessories
Cordset: Single Sensor use RK 4.4T-*-RS 4.4T
1 = Vinput
2 = AIN +3 = GND4 = AIN -5 = PE
Single Sensor
5-pin eurofast®
Pinout AccessoriesBase Module
* indicates length in meters
BL67-B-2M12
eurofast®, 2 Connectors
Cordset 4-wire: No Drain, No Shield, Single Sensor use RK 4.4T-*-RS 4.4T
Cordset 5-wire: Drain and Shield, Single Sensor use RK 4.5T-*-RS 4.5T/S653
30 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Resistive Thermal Device (RTD) Input Module2 AI-PT
Module overview
• RTD temperature inputs: Pt100, Pt200, Pt500 and Pt1000 as well as nickel sensors Ni100 and Ni1000• 2- or 3-wire connections• Electronics galvanically isolated from the field level via optocoupler• LEDs indicate diagnostics
RTD Input Module BL67-2AI-PT
224 VDC< 30 mA< 45 mA< 1 W< 1 mA> 30 VDCaccording to DIN IEC 751according to DIN 43 76016 Bit signed integer /12 Bit full-range left-justified< 0.1 %< 0.1 %< 0.2 %0.05 %< 300 ppm/°C from end value< 130 ms per channel
Pt100, Pt200, Pt500, Pt1000Ni100, Ni1000- 50/60 Hz filter- 16/12 bit data- Enable/suppress diagnostics- Activate/deactivate channel- RTD type- 2-wire/3-wire- Over/under range- Open circuit- Short circuitBL67-B-2M12
Electronic moduleNumber of channelsNominal voltage from power feed Vinput
Nominal current from power feed Vinput
Nominal current from module bus IMB
Power loss of the module, typical PMAX
Measurement currentDestruction limitPlatinum sensorsNickel sensorsMeasurement value representation
Offset errorLinearityBasic error at 23 °CRepeat accuracyTemperature coefficient TK
Cycle timeConnectable sensors
Platinum sensorsNickel sensors
Parameter data
Diagnostic data
Base module
31InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Resistive Thermal Device Input ModuleBase Module, Pinout and Accessories
Cordset: Single Sensor use RK 4.4T-*-RS 4.4T
Pinout Accessories
1 = S +2 = AIN +3 = GND4 = AIN -5 = PE
Single Sensor
5-pin eurofast®
Base Module
* indicates length in meters
BL67-B-2M12
eurofast®, 2 Connectors
Cordset 4-wire: No Drain, No Shield, Single Sensor use RK 4.4T-*-RS 4.4T
Cordset 5-wire: Drain and Shield, Single Sensor use RK 4.5T-*-RS 4.5T/S653
32 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Thermocouple Input Module2 AI-TC
Module overview
• Thermocouple input types: B, E, J, K, N, R, S and T• Electronics galvanically isolated from the field level via optocoupler• Internal or remote cold junction compensation• LEDs indicate diagnostics
Thermocouple Input Module BL67-2AI-TC
Electronic moduleNumber of channelsNominal voltage from power feed Vinput
Nominal current from power feed Vinput
Nominal current from module bus IMB
Power loss of the module, typical PMAX
Max. input voltage UMAX (destruction limit)SensorsTemperature ranges
Type BType EType JType KType NType RType SType T
Voltage measurements (resolution)± 50 mV± 100 mV± 500 mV± 1 V
Measurement value representation
Offset errorLinearityBasic error at 23 °CRepeat accuracyTemperature coefficient TK
Cycle time
Parameter data
Diagnostic data
Base module
224 VDC< 30 mA< 35 mA< 1 W> 10 VDC (continuous)according to DIN IEC 584, Class 1, 2, 3
100 to 1820.0 °C-270 to 1000.0 °C-210 to 1200.0 °C-270 to 1370.0 °C-270 to 1300.0 °C-50 to 1760.0 °C-50 to 1540.0 °C-270 to 400.0 °C
< 2 µV< 4 µV< 20 µV< 50 µV16 Bit signed integer /12 Bit full-range left-justified< 0.1 %< 0.1 %< 0.2 %0.05 %< 300 ppm/°C from end valuetemperature: <130 ms per channel;voltage: <70 ms per channel- 50/60 Hz filter- 16/12 bit data- Enable/suppress diagnostics- Activate/deactivate channel- Thermocouple type- Over/under range- Open circuit- no Pt1000-sensor found(cold juntion compensation)BL67-B-2M12
33InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Thermocouple Input ModuleBase Module, Pinout and Accessories
Pinout Accessories
Cordset: Single Sensor use RK 4.4T-*-RS 4.4T
Field Wireable (built in Pt1000): Single Sensor use BL67-WAS5-THERMO
1 = CJ+2 = TC+3 = GND4 = TC-, CJ-5 = PE
Single Sensor
5-pin eurofast®
Base Module
* indicates length in meters
CJ = Cold Junction Compensator Pt1000TC = Thermocouple
eurofast®, 2 Connectors
BL67-B-2M12
Thermoelement can be replaced remotely using this configuration.
Cordset 4-wire: No Drain, No Shield, Single Sensor use RK 4.4T-*-RS 4.4T
Cordset 5-wire: Drain and Shield, Single Sensor use RK 4.5T-*-RS 4.5T/S653
RK 4.5T-*-RS 4.5T/S653 BL67-WAS5-THERMO
* indicates length in meters
BL67-B-2M12
Thermocouple Probe
34 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Technical Data - Analog Output Modules2 AO-I (0/4 to 20 mAmps),2AO-V (-10/0 to +10 Volts)
Analog Output Module BL67-2AO-V
WWWWW
BL67-2AO-I
Module overview
• An analog output signal• 2 channel current or voltage• Electronics galvanically isolated via optocoupler• LEDs indicate diagnostics
WWWWW
Electronic moduleNumber of channelsNominal voltage from power feed Vinput
Nominal current from power feed Vinput
Nominal current from module bus IMB
Power loss of the module, typicalOutput voltage UA
Output currentBurden resistance
Resistive load RLO
Inductive load RLI
Capacitive load RLK
Short-circuit current IKTransmission frequency fT
Basic error at 23 °CRepeat accuracyOutput rippleTemperature coefficientSettling time (maximal)
Resistive loadInductive loadCapacitive load
Interference voltage suppressionCommon modeNormal mode
Interference between channelsData format
Parameter data
Base module
224 VDC< 50 mA< 60 mA< 1 W-10/0 to +10VDC
> 1 k
> 1 µF< 40 mA< 100 Hz0.2 %0.05 %0.02 %< 300 ppm/°C from end value
0.1 ms0.5 ms0.5 ms
> 90 dB> 70 dB> -50 dB16 Bit signed integer /12 Bit signed integer left-justified /12 Bit full-range left-justifiedNegative values are set to 0 when themeasurement range is 0 to +10 VDC.-16/12 bit data- 0 to +10 V/ -10 to +10V-substitute value-activate/deactivate channelBL67-B-2M12
224 VDC< 50 mA< 40 mA< 1 W
0/4 to 20 mA
< 450< 1 mH
< 200 Hz0.2 %0.05 %0.02 %< 150 ppm/°C from end value
0.1 ms0.5 ms
16 Bit signed integer /12 Bit full-range left-justifiedNegative values are set to0 mA or 4 mA.
-16/12 bit data- 0 to 20/4 to 20 mA-substitute value-activate/deactivate channelBL67-B-2M12
35InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Analog Output ModulesBase Module, Pinout and Accessories
Cordset: Single Sensor use RK 4.4T-*-RS 4.4T
Pinout Accessories
Single Sensor
5-pin eurofast®
1= Vinput
2 = AOUT +3 = GND4 = AOUT -5 = PE
Base Module
* indicates length in meters
BL67-B-2M12
eurofast®, 2 Connectors
Cordset 4-wire: No Drain, No Shield, Single Sensor use RK 4.4T-*-RS 4.4T
Cordset 5-wire: Drain and Shield, Single Sensor use RK 4.5T-*-RS 4.5T/S653
36 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Serial Interface Module
Technical Data - Serial Interface Module1RS232
BL67-1RS232
Electronic moduleNumber of channelsVoltage supplyVoltage from module bus UMB
voltage rangeNominal current from power feed Vinput
Nominal current from module bus IMB
In/- Outputs transmission level active (URS1) transmission level inactive (URS0) common mode voltage range (UGL) transmission channels transmission rateRS232 cable lengthIsolation voltage UTMB (module bus/RS232)MemoryParameter data
Diagnostic Data
Base module
1via module bus5 VDC4.75 to 5.25 VDC < 50 mA100 mA
-15 to -3 VDC3 to 15 VDC-7 to 12 VDC2 (1/1) TxD and RxD, full duplex300 to 115200 Baudmax. 15 m
min. 1000 VDC128 Byte receive; 64 Byte transmit-Enable/suppress diagnostics-Data rate-Data bits-Parity-Stop bits-Data flow control-XON character-XOff character-Buffer overflow-Frame error-Data flow control error-Hardware failure-Parameterization errorBL67-B-1M12-8BL67-B-1M12
Module overview
• Transfer of serial RS232 data• Bit Transfer Rate: 300 Bit/s to 115200 Bit/s.• 7 or 8 bit format• Parity: None, even or odd• 1 or 2 stop bits• LEDs indicate data transfer status
37InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
Technical Data - Serial Interface ModuleBase Module, Pinout and Accessories
* indicates length in meters
Cordset: 8-pin eurofast®
use RKC 8T-*-RSC 8T8-pin eurofast®
1 = RxD2 = TxD3 = RTS4 = CTS5 = GND6 = RTS7 = TxD8 = PE
eurofast®, 1 Connector
BL67-B-1M12-8
Pinout AccessoriesBase Module
5-pin eurofast®
1 = GNDMB
2 = TxD3 = GNDIO
4 = RxD5 = PE
Cordset: 4-pin eurofast®
use RS 4.4T-*-RK 4.4T
Pinout AccessoriesBase Module
BL67-B-1M12
eurofast®, 1 Connector
* indicates length in meters
38 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
SoftwareI/Oassistant Software for the BL67 Station
Overview
Diagnostic software for• project planning• configuring BL67 station• monitoring I/O data• error logging
Functions
• Example projects
• Projects can be created on the monitor, structured and extended according to needs
• Selection of the required modules
• Plausibility tests of the station
• Off-line configuration of individual stations
• Detailed project documentation
• On-line help
• On-line configuration and parameterization of individual stations
• Creation of station-specific GSD files
• Commissioning station
• Reading and setting I/O data
• Diagnostic and error correction
• Download of new firmware into the BL67 gateway
• Resetting a BL67 station
• Error logging
Description
The I/Oassistant software package is an integralpart of the BL67 system. At every step in theprocess this software provides helpful informationin a clear, concise and easy to use manner.
During the initial design stages you can build an“off-line” system before you order a single pieceof hardware. The I/Oassistant will guide youthrough choosing the right base and electronicmodules. It will determine if the system is withinpower and data limitations. It will provide detaileddocumentation including: bills of material, overalldimensions, and labels. With real hardware, thesoftware is used to configure the BL67 station. Itcan be used to set any settable parameterincluding: thermocouple types, analog ranges,diagnostic reporting events and more. Once theBL67 system is installed and running, the I/Oassistant can be used to monitor I/O data.
One of the best features of the I/Oassistant is itsability to automatically down load a diagnostic logfrom a running BL67 station. One of the mostpowerful features of the BL67 station is that itautomatically logs all diagnostic messages - witha time and date stamp! This is great for thosehard to find intermittent problems.
Programming Cable
Part no. XN-PS2-CABLE
39InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
3
For labeling electronic modules BL67-LABEL/DIN-A4 50STCK DIN A4 sheets, slice, perforated (laser print)
50 labels
Designation
Labels, Manuals and Programming Cable
Description Type
Labels
BL67 PROFIBUS® ManualBL67 DeviceNet™ ManualBL67 Electronic Modules
Manuals
Description of BL67-Gateway for PROFIBUS®-DPDescription of BL67-Gateway for DeviceNetDescription of fieldbus independent BL67 electronic modules
Programming Cable
For online configuration of BL67 Gateway XN-PS2-CABLE
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588040
Notes
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 41
4
DeviceNet™ Cables and Accessories
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588042
Pre-molded Fieldbus Cables for DeviceNetTM
Standard lengths of pre-molded cordsets and bulk cable are listed below.
Cordsets Bulk Cable
metersmeters feet
0.3
0.5
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
10
15
20
25
30
40
50
1.0
1.6
3.3
4.9
6.6
8.2
9.8
13
16
20
26
33
49
66
82
98
131
164
30
75
150
225
300
- - -
Standard Cable Lengths
+ 4 % (or 50 mm) of length-0% of lengthwhichever is greater
Other lengths available upon request. Contact the factory at 1-888-546-5880.
Unit Conversions:1 meter = 3.28 feet1 meter = 39.8 inches
Tolerances:
feet
98
246
492
738
984
- - -
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 43
4
DeviceNetTM – Thin Cable Specifications
Outer JacketData PairPower Pair BulkCable
Type
572AWM 2464
75°C 300V
PVC Gray7.3 mm(.285 in)
16.5 ΩΩΩΩΩ PE
NEC PLTCCEC AWM-I/II A/B FT4
DCR (/1000 ft) Insulation
AWGColor Code
DCR (/1000ft) Insulation
Material Color Nominal O.D.
RB50603-*M
PVC Gray7.3 mm(.285 in)
PVC Gray8.4 mm(.330 in)
16.5 ΩΩΩΩΩ PE
16.5 ΩΩΩΩΩ PE
2/22 AWGBlue/White
2/22 AWGBlue/White
2/22 AWGBlue/White
16.5 ΩΩΩΩΩ PVC
16.5 ΩΩΩΩΩ PVC
16.5 ΩΩΩΩΩ SR-PVC RB50629-*M
RB50651-*M
Cable that meets the requirements ofODVA Thin or Type 1 cable. This cable iscommonly used as drop cable to amaximum length of 6 meters (20 feet) ortrunk cable in networks up to a maximumlength of 100 meters (328 feet).
†
Foil22 AWG
Shields
TypeDrain Wire
Foil/Braid 22 AWG
Foil/Braid 22 AWG
Approvals
577AWM 2464
75°C 300V
NEC PLTCCEC AWM-I/II A/B FT4
NEC PLTC/CL2CEC CMG
AWGColor Code
2/22 AWGBlack/Red
2/22 AWGBlack/Red
2/22 AWGBlack/Red
578AWM 2464
75°C 300V
PVC Gray6.0 mm(.235 in)
16.5 ΩΩΩΩΩ PE
2/22 AWGBlue/White
16.5 ΩΩΩΩΩ PVC
RB50764-*MFoil (Data Only) 22AWG
NEC AWMCEC AWM-I/II A/B FT1
2/22 AWGBlack/Red
5715AWM 2095
80°C 300V
††
Data Rate MaximumTrunk Length
125 Kbaud
250 Kbaud
500 Kbaud
100M (328FT)
100M (328FT)
100M (328FT)
Drop LengthMaximum Cumulative
156M (512FT)
78M (256FT)
39M (128FT)
6M (20FT)
†
Available on some cable types.†
5724AWM 2464
75°C 300V
NEC AWMCEC AWM-I/II A/B FT1
2/24 AWGBlack/Red
24.9 ΩΩΩΩΩ PVC
2/24 AWGBlue/White
24.9 ΩΩΩΩΩ PE
PVC Light Gray5.7 mm(.224 in)
Foil24 AWG
RB51045-*M† † †
* indicates length in meters.
See page 42 for standard bulk cable lengths.†
† † † Maximum trunk length is 75 meters at all data rates.
† See page 106 for flexlife performance.†
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588044
DeviceNetTM – Mid Cable Specifications
Cable that meets the requirements ofODVA Mid or Type III cable. Itprovides more flexibility when usedas a trunk cable up to a maximumlength of 300 meters (984 feet).
Outer JacketData PairPower Pair Shields
AWGColor Code
DCR (/1000 ft) Insulation
AWGColor Code
DCR (/1000ft) Insulation
Material Color Nominal O.D.
PVC Gray13.5 mm(.530 in)Aluminum Armor
2/18 AWGBlack/Red
6.7 ΩΩΩΩΩ PVC
2/20 AWGBlue/White
10.4 ΩΩΩΩΩ PE†††
Type TypeDrain Wire
Foil/Armor 20 AWG
NEC PLTC/CMCEC CMG
See page 42 for standard bulk cable lengths.†
Approvals
See page 106 for flexlife performance.
* indicates length in meters.
††
Armorfast Cable†††
PVC Gray8.4 mm(.330 in)
10.4 ΩΩΩΩΩ PE
2/20 AWGBlue/White
2/16 AWGBlack/Red
4.1 ΩΩΩΩΩ PVC
Foil 22 AWG
NEC PLTCCEC AWM-I/II A/B FT4
PVC Gray8.4 mm(.330 in)
10.4 ΩΩΩΩΩ PE
2/20 AWGBlue/White
2/17 AWGBlack/Red
5.2 ΩΩΩΩΩ PVC
PUR Gray8.4 mm(.330 in)
10.4 ΩΩΩΩΩ PE
2/20 AWGBlue/White
2/17 AWGBlack/Red
5.2 ΩΩΩΩΩ PVC
Foil22 AWG
Foil22 AWG
NEC AWMCEC AWM-I/II A/B FT1
NEC PLTCCEC AWM-I/II A/B FT4
5721A75°C 300V
5711AWM 2464
75°C 300V
5723AWM 20233
80°C 300V
5722AWM 2464
75°C 300V
Data Rate MaximumTrunk Length
125 Kbaud
250 Kbaud
500 Kbaud
300M (984FT)
250M (820FT)
100M (328FT)
A
RB50859-*M†††
RB50721-*M
†
RB50877-*M
RB50876-*M
††
†
Dwg
B
A
A
A
B
BulkCable PartNumber
†
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 45
4
DeviceNetTM – Thick Cable Specifications
Flat Cable
Cable that meets the requirements ofODVA Thick or Type II cable. It providesthe most power to a network when usedas a trunk cable up to a maximumstandard cable length of 500 meters(1640 feet). Flat cable and TC ratedcables may be used as a trunk cable to amaximum length of 420M (1378FT).
Flat Profile is 19.3 mm (0.760 in) x 5.3 mm (0.210 in).
See page 42 for standard bulk cable lengths.
* indicates length in meters.
†
††
Outer JacketData PairPower Pair Shields
Type
PUR Light Gray10.4 mm(.409 in)
6.9 ΩΩΩΩΩ PE
DCR (/1000 ft) Insulation
AWGColor Code
DCR (/1000ft) Insulation
Material Color Nominal O.D.
PVC Light Gray11 mm(.435 in)
6.9 ΩΩΩΩΩ PE
2/18 AWGBlue/White
2/18 AWGBlue/White
3.2 ΩΩΩΩΩ PVC
3.2 ΩΩΩΩΩ SR-PVC
PVC Light GrayFlat Profile
4.1 ΩΩΩΩΩ PE
2/16 AWGBlue/White
4.4 ΩΩΩΩΩ PVC
PVC Light Gray13 mm (.515)
6.9 ΩΩΩΩΩ PE
2/18 AWGBlue/White
4.9 ΩΩΩΩΩ PVC
††
579AWM 2570
75°C 300V
NEC PLTC/CL2CEC CMB
AWGColor Code
2/15 AWGBlack/Red
2/15 AWGBlack/Red
2/16 AWGBlack/Red
2/16 AWGBlack/Red
TypeDrain Wire
Foil/Braid18 AWG
Foil/Braid 18 AWG
None
Foil/Braid 18 AWG
RB50652-*M
RB50787-*M
Approvals
575AWM20233
80°C 300V
NEC AWMCEC AWM-I/II A/B FT1
RB50633-*M
5720
75°C 600V
5713
75°C 300V
RB50793-*MNEC TC
NEC CL2CEC AWM-I/II A/B FT4
Data RateMaximum Standard Trunk Length
125 Kbaud
250 Kbaud
500 Kbaud
500M (1640FT)
250M (820FT)
100M (328FT)
Maximum TrunkLength (5713, 5720)
420M (1378FT)
200M (656FT)
100M (328FT)
BulkCable PartNumber
†Dwg
A
B
A
B
A
A
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588046
DeviceNet™ Thin, Mid, and Thick Cable and Cordsets
RSM RSM 57x- *M
euro
fast
® (t
hin
, m
id o
nly
)
RSM RKM RSC
RSM
WSM
RKM
WKM
RSC
WSC
RKC
WKC
RSM WSM 57x- *M RSM RKM 57x- *M RSM WKM 57x- *M RSM RSC 57x- *M
WSM WSM 57x- *M WSM RKM 57x- *M WSM WKM 57x- *M WSM RSC 57x- *M
RKM RKM 57x- *M RKM WKM 57x- *M RKM RSC 57x- *M
WKM WKM 57x- *M WKM RSC 57x- *M
RSC RSC 57x- *M
min
ifas
t®
Pin
(M
ale)
So
cket
(Fe
mal
e)P
in (
Mal
e)S
ock
et (
Fem
ale)
minifast®
Pin (Male) Socket (Female) Pin (Male)eurofast® (thin, mid only)
RSM 57x- *M WSM 57x- *M RKM 57x- *M WKM 57x- *M RSC 57x- *M
For stainless steel coupling nut:Change part number (RSM...to RSV, RSC...to RSCV).
Refer to the Cordset Builder on www.interlinkbt.com forassistance with cordset/cable combinations.
x indicates cable type.* indicates length in meters.
Standard cable lengths are 0.3, 0.5, 1.0, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0 ,6.0 ,8.0 ,10 ,15....50M. Consult factory for other lengths.
Armorfast cable is only available with straight minifast® connectors (RSM, RKM).
WSM
Example WSM RSC 57x- *M
1 Meter
WKM
Bare
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 47
4
DeviceNet™ Thin, Mid, and Thick Cable and Cordsets
RSC FKFD 57x- *MRSC FSFD 57x- *MRSC RKFP 57x- *MRSC RSFP 57x- *MRSC WKC 57x- *MRSC RKC 57x- *MRSC WSC 57x- *M
WSC FKFD 57x- *MWSC FSFD 57x- *MWSC RKFP 57x- *MWSC RSFP 57x- *MWSC WKC 57x- *MWSC RKC 57x- *MWSC WSC 57x- *M
RKC FKFD 57x- *MRKC FSFD 57x- *MRKC RKFP 57x- *MRKC RSFP 57x- *MRKC WKC 57x- *MRKC RKC 57x- *M
WKC FKFD 57x- *MWKC FSFD 57x- *MWKC RKFP 57x- *MWKC RSFP 57x- *MWKC WKC 57x- *M
WSC RKC WKC RSFP RKFP FSFD FKFD
minifast® bulkheadPin (Male) Socket (Female) Pin (Male)
eurofast® bulkhead (thin only)Pin (Male) Socket (Female)Socket (Female)
eurofast® (thin and mid only)
WSC 57x- *M RKC 57x- *M WKC 57x- *M RSFP 57x- *M RKFP 57x- *M FSFD 57x- *M FKFD 57x- *M
RSM FKFD 57x- *MRSM FSFD 57x- *MRSM RKFP 57x- *MRSM RSFP 57x- *MRSM WKC 57x- *MRSM RKC 57x- *MRSM WSC 57x- *M
WSM FKFD 57x- *MWSM FSFD 57x- *MWSM RKFP 57x- *MWSM RSFP 57x- *MWSM WKC 57x- *MWSM RKC 57x- *MWSM WSC 57x- *M
RKM FKFD 57x- *MRKM FSFD 57x- *MRKM RKFP 57x- *MRKM RSFP 57x- *MRKM WKC 57x- *MRKM RKC 57x- *MRKM WSC 57x- *M
WKM FKFD 57x- *MWKM FSFD 57x- *MWKM RKFP 57x- *MWKM RSFP 57x- *MWKM WKC 57x- *MWKM RKC 57x- *MWKM WSC 57x- *M
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588048
DeviceNet™ Open Connector Cordsets
x indicates cable type.* indicates length in meters.For stainless steel coupling nut: Change part number (RSM...to RSV, RSC...to RSCV).
Pinouts
RSM CBC5 57x-*M RKM CBC5 57x-*MWSM CBC5 57x-*M WKM CBC5 57x-*M
WSM BK52C 57x-*M WKM BK52C 57x-*MRKM BK52C 57x-*M
CBC5
BK52C
RSM WSMBare RKM WKM RSC
RSC BK52C 57x-*M
minifast® eurofast®
Pin (Male)Socket (Female)Pin (Male)
CBC5 57x-*M
BK52C 57x-*M RSM BK52C 57x-*M
Thin, Mid and Thick Thin & Mid only
RSC CBC5 57x-*M
1 = Black (-Voltage)
2 = Blue (CAN_L)
3 = Bare (Shield Drain)
4 = White (CAN_H)
5 = Red (+Voltage)
CBC5BK52C
1 = Black (-Voltage)
2 = Blue (CAN_L)
3 = Bare (Shield Drain)
4 = White (CAN_H)
5 = Red (+Voltage)
1 = Bare (Shield Drain Wire)
2 = Red (+ Voltage)
3 = Black (-Voltage)
4 = White (CAN_H)
5 = Blue (CAN_L)
Male eurofast®Female minifast® Female eurofast®Male minifast®
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 49
4
See page 47 for bare lead options on bulkheads.
Refer to the Cordset Builder on www.interlinkbt.com for assistance with cordset/cable combinations.
Standard cable lengths are 0.3, 0.5, 1.0, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0 ,6.0 ,8.0 ,10 ,15....50M. Consult factory for other lengths.
Consult factory for daisy chain options.
DeviceNet™ Open Connector Cordsets
eurofast®
WKC CBC5 57x-*M RSFP CBC5 57x-*M RKFP CBC5 57x-*M FSFD CBC5 57x-*M
RKFP BK52C 57x-*MRSFP BK52C 57x-*M FSFD BK52C 57x-*M
RSFP RKFP FSFD FKFD
FKFD CBC5 57x-*M
FKFD BK52C 57x-*M
Socket (Female)Pin (Male) Pin (Male) Socket (Female) Pin(Male)
RKC CBC5 57x-*M
WKC BK52C 57x-*M RKC BK52C 57x-*M
WSC CBC5 57x-*M
WSC BK52C 57x-*M
RKC
eurofast® bulkheadminifast® bulkheadSocket (Female)
Thin and Mid only Thin, Mid and Thick Thin only
WSC WKC
DeviceNet™ Multi-Drop Harnesses
CBC5 VB2
VBRK Mini-Tee
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588050
minifast® Cordset and Receptacle Connector Dimensions/Configuration
RKM
WSM WKM
RSFP Mounting InstallationRKFP
RSM
Pinouts
Male Female
1. Bare (Shield Drain Wire)2. Red ( + Voltage)3. Black ( - Voltage)4. White (CAN_H)5. Blue (CAN_L)
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 51
4
eurofast® Cordset and Receptacle Connector Dimensions/Configuration
WSCWKC
RSC RKC
Mounting InstallationFKFDFSFD
Pinouts
Male Female
1. Bare (Shield Drain Wire)2. Red ( + Voltage)3. Black ( - Voltage)4. White (CAN_H)5. Blue (CAN_L)
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588052
DeviceNetTM Terminating Resistors
eurofast® terminating resistor• internal resistor• male eurofast® connector
RSE 57-TR2
Type Applications Wiring diagram / Pin configuration
nominal voltage: 24 VDCinternal resistance: 120 Ω, 1/4 W
RKM 57-TR2
RKE 57-TR2
eurofast® terminating resistor• internal resistor• female eurofast® connector
nominal voltage: 24 VDCinternal resistance: 120 Ω, 1/4 W
minifast® terminating resistor• internal resistor• female minifast® connector
nominal voltage: 24 VDCinternal resistance: 120 Ω, 1/4 W
minifast® terminating resistor withvoltage monitoring
• internal resistor• male minifast® connector• led indication red-reverse polarity green-okay
nominal voltage: 24 VDCinternal resistance: 120 Ω, 1/4 W
nominal voltage: 24 VDCinternal resistance: 120 Ω, 1/4 W
minifast® terminating resistor• internal resistor• male minifast® connector
RSM 57VM-TR2
RSM 57-TR2
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 53
4
DeviceNetTM Feed Through Connectors
Type ApplicationsFKM FS 57/M12
RSF RKF 57/22
Panel Cutout
minifast® Bulkhead Receptacle
• straight male/female feed-through• for use with DeviceNet minifast® cordsets
Closure Caps
minifast® Closure Cap
• mates to female receptacles• nylon
eurofast® Closure Cap
• mates to female receptacles• nylon
Type Applications
RSFK-BC (10/BAG)
VZ-3 (8/BAG)
eurofast® feed through connection, M 12 x 1
• straight male/female connector• for pre-molded eurofast® cables
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588054
Flat Cable Connectors
eurofast® Flat Cable Connector
Flat cable connector tofemale eurofast® drop
Type Dimensions
FK 57-IDC
For stainless steel: Change part number (FK...to FKV).
FK 57-IDC ET
Includes connector, end termination kit, and splice kit.
minifast® Flat Cable Connector
Flat cable connector tofemale minifast® drop
For stainless steel: Change part number (RKF...to RKFV).
RKF 57-IDC
Type Dimensions
RKF 57-IDC ET
Includes connector, end termination kit, and splice kit.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 55
4
Circuit Board Connectors and Receptacles with Leadseurofast®
FKFD 57 PCB
FSFD 57 PCB
WFS 57 PCB
Panel Cut-out Board Layout (reference only**)
* indicates length in meters.** consult source drawing for board layout.Refer to page 42 for standard cable lengths.
Pinoutsminifast® Female
FKFD 57- *M
FSFD 57- *M
FK 57 PCB KIT
FS 57 PCB KIT
1. Bare2. (+Volt)3. (-Volt)4. (CAN_H)5. (CAN_L)
eurofast® Femaleeurofast® Male
minfast®
RKF 57 PCB KIT
RSF 57 PCB KIT
RKF 57- * M
RSF 57- *M
Panel Cut-out Board Layout (reference only**)
minifast® Male
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588056
DeviceNetTM eurofast® Junction- Standard and with Voltage Monitoring
JBBS-57-E811Type Applications Wiring diagram / Pin configuration
8-port busstop® junction with voltagemonitoring
• bus in/bus out connections (7/8" minifast®)• eight eurofast® connectors for field connections• voltage monitoring provides low voltage (12.9V) and high voltage (25.6V) indication.
LED Indication(Lo) < 12.9V Amber(Ok) 12.9V-25.6V Green(Hi) > 25.6V Amber
JBBS-57-E812
Type Applications Wiring diagram / Pin configuration
8-port busstop® junction
• bus in/bus out connections (7/8" minifast®)• eight eurofast® connectors for field connections
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 57
4
DeviceNetTM eurofast® Junction Tee
Pinouts
eurofast® Female1. Bare (Shield Drain Wire)2. Red (+Voltage)3. Black (-Voltage)4. White (CAN_H)5. Blue (CAN_L)
minifast® Male minifast® Female
Type Applications Wiring diagram / Pin configuration
4-port busstop® junction tee
• minifast ® bus in/bus out connections• four eurofast® device ports• for stainless steel connectors change part number to JTBS 57-E433
JTBS 57-E434
JTBS 57-E634
6-port busstop® junction tee
• minifast® bus in/bus out connections• six eurofast® device ports• for stainless steel connectors change part number to JTBS 57-E633
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588058
DeviceNetTM minifast® Junction Tee
minifast® Male minifast® Female
Pinouts
1. Bare (Shield Drain Wire)2. Red (+Voltage)3. Black (-Voltage)4. White (CAN_H)5. Blue (CAN_L)
Type Applications Wiring diagram / Pin configuration
4-port busstop® junction tee
• minifast® bus in/bus out connections• four minifast® device ports• for stainless steel connectors change part number to JTBS 57-M433
JTBS 57-M434
JTBS 57-M634
6-port busstop® junction tee
• minifast® bus in/bus out connections• six minifast® device ports• for stainless steel connectors change part number to JTBS 57-M633
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 59
4
Pinouts
eurofast® Female1. Bare (Shield Drain Wire)2. Red (+Voltage)3. Black (-Voltage)4. White (CAN_H)5. Blue (CAN_L)
minifast® Male minifast® Female
DeviceNetTM eurofast® Junction Tee with Voltage Monitoring
Type Applications Wiring diagram / Pin configuration
4-port busstop® junction tee withvoltage monitoring
• minifast ® bus in/bus out connections• four eurofast® device ports• for stainless steel connectors change part number to JTBS 57-E433• voltage monitoring provides low voltage (12.9V) and high voltage (25.6) indication.
Led Indication(Lo) < 12.9V Amber(Ok) 12.9-25.6V Green(Hi) > 25.6V Amber
JTBS 57VM-E434
JTBS 57VM-E634
6-port busstop® junction tee with voltagemonitoring
• minifast® bus in/bus out connections• six eurofast® device ports• for stainless steel connectors change part number to JTBS 57-E633• voltage monitoring provides low voltage (12.9V) and high voltage (25.6) indication.
Led Indication(Lo) < 12.9V Amber(Ok) 12.9-25.6V Green(Hi) > 25.6V Amber
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588060
minifast® Male minifast® Female
Pinouts
1. Bare (Shield Drain Wire)2. Red (+Voltage)3. Black (-Voltage)4. White (CAN_H)5. Blue (CAN_L)
DeviceNetTM minifast® Junction Tee with Voltage Monitoring
Type Applications Wiring diagram / Pin configuration
4-port busstop® junction tee with voltagemonitoring
• minifast® bus in/bus out connections• four minifast® device ports• for stainless steel connectors change part number to JTBS 57-M433• voltage monitoring provides low voltage (12.9V) and high voltage (25.6) indication.
Led Indication(Lo) < 12.9V Amber(Ok) 12.9-25.6V Green(Hi) > 25.6V Amber
JTBS 57VM-M434
JTBS 57VM-M634
6-port busstop® junction tee with voltagemonitoring
• minifast® bus in/bus out connections• six minifast® device ports• for stainless steel connectors change part number to JTBS 57-M633• voltage monitoring provides low voltage (12.9V) and high voltage (25.6) indication.
Led Indication(Lo) < 12.9V Amber(Ok) 12.9-25.6V Green(Hi) > 25.6V Amber
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 61
4
DeviceNetTM Conduit Adapter
Conduit BodiesCROUSE - HINDS Hub Size = 3/4
Shape
CCCCC
LBLBLBLBLB
LLLLLLLLLL
LRLRLRLRLR
Style
Form 8Mark 9
Form 8Mark 9
Form 8Mark 9
Form 8Mark 9
Part Number
C28C29
LB28LB29
LL28LL29
LR28LR29
The conduit adapter attaches to a standard conduit body for transition to minifast® or eurofast® connectors.
Gasket and mounting hardware included (8-32 x 1/2”).
Dimensions
Description
Check network layout to see if the terminator should be turned on. Default is to off position.
minifast® eurofast®
1-p
ort
2-p
ort
BCA 57-M123
BCA 57-M223 BCA 57-E223
BCA 57-E123
1 = Black (-Voltage)
2 = Blue (CAN_L)
3 = Bare (Shield Drain)
4 = White (CAN_H)
5 = Red (+Voltage)
Schematic
Trunk
Drop
Trunk
Drop
Drop
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588062
VB2 junction• ready for eurofast®
branch and trunk cordsets• maximum 6 meter drop
DeviceNetTM eurofast® Drop Junctions
Part Number Definition
VB2-RKC57x-*M-FKM FSM
VB2-FKM/RKC RSC57x-*M/*M
VB2 junction with trunk line• reduced power and data branch• maximum 6 meter branch
Type Applications Wiring diagram / Pin configuration
VB2 junction with trunk line• ready for eurofast® trunk line• maximum 6 meter drop
J2
J1 J3
J2
J1 J3
J2
J1 J3
* indicates cable length.x indicates cable type.
C
B
A
x indicates cable type; thin and mid only.* indicates cable length.
x x
VB2-FKM/FKM/FSM 57
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 63
4
DeviceNetTM eurofast® Bus Tees
eurofast® Branch• minifast® (7/8“) to eurofast®
(M12 x 1)• bus power and data branch
eurofast® Cordset Branch• minifast® (7/8“) to eurofast®
(M12 x 1) extension cable• available with all thin cables; limit 6 M branch• for right angle connector, change RKC to WKC
Type Applications Wiring diagram / Pin configuration
eurofast® Tee• eurofast® (M12 x 1) trunk and drop
RSM-FKM-RKM57
RSM RKC 57x-*M RKM 57
RSC 2RKC 57
* indicates cable length.x indicates cable type.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588064
Bus Drop, Power and Diagnostic Tees
For stainless steel coupling nuts: Change part number (RSM 2RKM..to RSV 2RKV..).
RSM 2RKM 57
RSM 2RKM 57-KF
RSM 2RKM 57-KM
Type Applications Wiring diagram / Pin configuration
RSM RKM 57 WSM 40 PST
RSM 2RKM 57 DGT
minifast® Drop Off Bus Line• full power and data drop• maximum 6 meter branch• standard keyway
minifast® Drop Off Bus Line• full power and data drop• maximum 6 meter branch• keyway facing female
minifast® Drop Off Bus Line• full power and data drop• maximum 6 meter branch• keyway facing male
busstop® Power Tee• provides segment power• includes reverse current protection
busstop® Diagnostic Tee• provides easy connection for diagnostic tools• tap protected with cover when not in use (not shown)
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 65
4
Gender Changers and Elbow Connectors
For stainless steel coupling nuts: Change part number (RKM RKM.. to RKV RKV..).
Type Applications
RSM RSM 57
RKM RKM 57
WSM RKM 57
RSM 57-FK 4.5
Male minifast® Gender Changer• changes female cordset to male receptacle
Female minifast® Gender Changer• changes male cordset to female receptacle
minifast® Elbow• right angle male to female connector
minifast® to eurofast® Adapter• minifast male to eurofast female connector
†
not available in stainless steel.†
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588066
FSV 57-*M / 14.75 RSFV 57-*M / 14.75
Device Gland Receptacles
* indicates cable length.Consult factory for availabilityof nickel plated brass.
1. Grey (Shield)2. Red (+ Voltage)3. Black (- Voltage)4. White (CAN_H)5. Blue (CAN_L)
eurofast® minifast®Selection Guide
M20 FSV 57-*M / M20FSV 57-*M / M20FSV 57-*M / M20FSV 57-*M / M20FSV 57-*M / M20 RSFV 57-*M / M20RSFV 57-*M / M20RSFV 57-*M / M20RSFV 57-*M / M20RSFV 57-*M / M20
1/2 - NPT FSV 57-*M / 14.5FSV 57-*M / 14.5FSV 57-*M / 14.5FSV 57-*M / 14.5FSV 57-*M / 14.5 RSFV 57-*M / 14.5RSFV 57-*M / 14.5RSFV 57-*M / 14.5RSFV 57-*M / 14.5RSFV 57-*M / 14.5
3/4 - NPT FSV 57-*M / 14.75FSV 57-*M / 14.75FSV 57-*M / 14.75FSV 57-*M / 14.75FSV 57-*M / 14.75 RSFV 57-*M / 14.75RSFV 57-*M / 14.75RSFV 57-*M / 14.75RSFV 57-*M / 14.75RSFV 57-*M / 14.75
FSV 57-*M / 14.5 RSFV 57-*M / 14.5
Male eurofast®Male minifast®
RSFV 57-*M / M20FSV 57-*M / M20
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 67
4
Panel Mount Receptacles - minifast®, eurofast®
RKF 57 - *MRKF 57 - *MRKF 57 - *MRKF 57 - *MRKF 57 - *M RSF 57 - *MRSF 57 - *MRSF 57 - *MRSF 57 - *MRSF 57 - *M
FK 57 - *MFK 57 - *MFK 57 - *MFK 57 - *MFK 57 - *M FS 57 - *MFS 57 - *MFS 57 - *MFS 57 - *MFS 57 - *Meurofast®
minifast®
eurofast®
minifast® RKF 57x - *MRKF 57x - *MRKF 57x - *MRKF 57x - *MRKF 57x - *M RSF 57x - *MRSF 57x - *MRSF 57x - *MRSF 57x - *MRSF 57x - *M
FK 57x - *MFK 57x - *MFK 57x - *MFK 57x - *MFK 57x - *M FS 57x - *MFS 57x - *MFS 57x - *MFS 57x - *MFS 57x - *M
Selection Guide Female Male
Lea
ds
Cab
le
Panel locknuts: LN 1/2-14/10 (10 pieces) for RSF and RKF styles.
Receptacles also available with DeviceNet cable; see pages 43-45 for cable specifications.
Example: RSF 57x-*Mx indicates cable type (57 only for bare lead option).* indicates cable length.
Parts in photo represent solder cups only. For solder cup only order part number RKF 57, FS 57 etc.
For stainless steel add “V” to housing identifier. Example: RKF...to RKFV or FK...to FKV...
RKF 57 RSF 57
FS 57
Female minifast® Female eurofast®1. Grey (Shield)2. Red (+ Voltage)3. Black (- Voltage)4. White (CAN_H)5. Blue (CAN_L)
1 Meter
FK 57
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588068
Typical Application
eurofast® System Module Junction
Note: See following page for descriptions of part numbers.
* indicates length in meters.
ApplicationsPart Number Schematic
System Module with TwoCircuit Groups• DeviceNet™ Circuit - Supplies DC power - Two Drops• Auxiliary Power - Supplies DC power - Category 2 E-stop - General Purpose M(achine)-stop
JBBS-57-SM01
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 69
4InterlinkBT®
RSC CBC5 572-*M *-meter, DeviceNet™ 5-pin eurofast® connector to 5 combicon connectorRSM RKM 579-*M *-meter, full trunkline (bus line) DeviceNet cable, male/female molded endsRSF RKF 57/22 male/female, 5-pin minifast® through-wall connectorRKC 572-*M *-meter, 5-wire DeviceNet thin cable, female/tinned endsRSC 572-*M *-meter, 5-wire DeviceNet thin cable, male/tinned endsJBBS-57-SM01 System Module
TURCK
RS 4.5T-*M *-meter, 5-wire eurofast cable, male/tinned ends, 20 AWG,gry PVC, ground allRSF RKF 40/22 male/female, 4-pin minifast® through-wall connectorRSM RKM 46-*M *-meter, 4-wire, male/female molded minifast® cable, 16 AWG, yellow PVC jacketRKM 46-*M *-meter, 4-wire, female/tinned ends minifast® cable, 16 AWG, yellow PVC jacketS7-M relay base, DIN and panel mount,with relay locking tabC7-A20DX/24VDC w/S9-N relay, 24 VDC coil with free-wheeling diode, 10A, DPDT
Caution! Install with S9-N blank plug to disable Push-To-Test/Pull-To-Lock functions.
Specifications
* indicates cable length.
Pinouts-minifast®Dimensions
FemaleTrunk Left & Right
Female Aux PowerLeft & Right
MaleBus Power inAux Power in
1 = Shield2 = V+3 = V-4 = CAN_H5 = CAN_L
1 = V+2 = E-Stop +3 = E-Stop-4 = V-
1 = V+Right (Red)2 = V+Left (Green)3 = V-Left (White)4 = V-Right (Black)
RKM 46-*M
FemaleDropline Local
Female Shield
Male E-Stop
1 = Shield2 = Shield3 = Shield4 = Shield5 = Shield
1 = E-Stop -Right2 = E-Stop +Right3 = E-Stop -Left4 = E-Stop +Left
1 = Shield2 = V+3 = V-4 = Can_H5 = CAN_L
Pinouts-eurofast®
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588070
Power Taps
SPTC2
Type Wiring diagram / Pin configuration
SPTT1
busstop® Power Tap with minifast® connectors• minifast® male to female bus connector• minifast® female power connector
busstop Power Tap with minifast® connectors• minifast® female to female bus connector• minifast® female power connector
busstop® Power Tap with terminal connectors• terminal strip bus connectors• terminal strip power connector
SPTC1
Bus Line Auxiliary Power
1. Shield2. + Voltage3. - Voltage4. CAN_H5. CAN_L
1. + Voltage2. - Voltage3. + Voltage4. - Voltage
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 71
4
For stainless steel housing: Change part number (BS 4151...to BSV 4157 or B 4151...to BV 4157...).
minifast® 5-pin Field Wireable Connectors
Female minifast®
Rating: 9 A, 300 VDC
Male minifast®
Rating: 9 A, 300 VDC
Thin CableB 4151-0/9
Thick CableB 4151-0/13.5
Fem
ale
Mal
e
BS 4151-0/9 BS 4151-0/13.5
Accepts 6-8 mm cable. Accepts 10-12 mm cable.
Accepts 6-8 mm cable. Accepts 10-12 mm cable.
eurofast® 5-pin Field Wireable Connectors
Accepts 4-8 mm cable.
Straight Right Angle
Fem
ale
Mal
e
B 8151-0 B 8251-0
BS 8151-0 BS 8251-0
Accepts 4-8 mm cable.
Accepts 4-8 mm cable.Accepts 4-8 mm cable.
Male eurofast®Female eurofast®
Rating: 3 A, 36 VDC Rating: 3 A, 36 VDC
To connect thermocouples use the field wireable with built in cold junction compensation. Part number BL67-WAS5-THERMO.
†
†
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588072
TURCK Power Cordsets for DeviceNet™ - minifast® Connectors
WSM RKM 46-1M
For stainless steel coupling nuts: Change part number (RSM..to RSV..).
minifast®
RSM 46-*M WSM 46-*M RKM 46-*M WKM 46-*M
RSM RSM 46-*M RSM RKM 46-*MRSM WSM 46-*M RSM WKM 46-*M
WSM WSM 46-*M WSM WKM 46-*M
RKM RKM 46-*M RKM WKM 46-*M
WKM WKM 46-*M
Pin (Male) Socket (Female)
Pin
(M
ale)
Soc
ket
(Fem
ale)
min
ifast
®
WSM RKM 46-*M
RSM WSM RKM WKM
RSM
RKM
Example
WKM
WSM
* indicates length in meters.
Standard cable lengths are 0.3, 0.5, 1.0, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0 ,6.0 ,8.0 ,10 ,15....50M.Consult factory for other lengths.
1 Meter
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 73
4
Specifications for DeviceNet™ Systems
Dimensions Cordset Pinouts(per SAE-J-1738 A)
Station Pinouts(per EN 50 044)
Female minifast®
WKM WKM
Female minifast®
Male minifast®
RSMMale minifast®
RSM
RKM
Female minifast®Female minifast®
RKM
WSM
Male minifast® Male minifast®
WSM
Power Pair
NEC STOWCEC STOWFT2
DCR (/1000 ft) Insulation
4.3 ΩΩΩΩΩ PVC
Approvals AWGColor Code
4/16 AWGBk,Wh,Rd,Gn
Cable Type
46 AWM 2464
105°C 300V
Outer Jacket
PVC Yellow11 mm(.435 in)
Material Color Nominal O.D.
None
Shields
TypeDrain Wire
Bulk Cable
RF50538-*M
1. Black (-Voltage)2. White (E-)3. Red (+ Voltage)4. Green (E+)
1. Red (+ Voltage)2. Green (E+)3. White (E-)4. Black (-Voltage)
Color Codes
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588074
TURCK Power Tees for DeviceNet™ - minifast® Connectors
For stainless steel coupling nuts: Change part number ( RSM 2RKM..to RSV 2RKV..).
Part Number Applications
minifast® Power Tee• standard keyway
RSM 2RKM 40
RSM 2RKM 40-KF
RSM 2RKM 40-KM
minifast® Power Tee• keyway facing male
minifast® Power Tee• keyway facing female
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 75
4
TURCK eurofast® 4-pin Field Wireable Connectors
Male eurofast®Female eurofast®
Accepts 4-8 mm cable.
Straight Right Angle
Fem
ale
Mal
e
B 8141-0/PG 9 B 8241-0/PG 9
BS 8141-0/PG 9 BS 8241-0/PG 9
Accepts 4-8 mm cable.
Accepts 4-8 mm cable.Accepts 4-8 mm cable.
Rating: 4 A, 150 VDC Rating: 4 A, 150 VDC
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588076
Notes
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 77
4
PROFIBUS®-DP Cables and Accessories
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588078
Standard lengths of pre-molded cordsets and bulk cable are listed below.
Other lengths available upon request. Contact the factory at 1-888-546-5880.
Unit Conversions:1 meter = 3.28 feet1 meter = 39.8 inches
Tolerances:
Pre-molded Fieldbus Cables for PROFIBUS®-DP
Cordsets Bulk Cable
metersmeters feet
0.3
0.5
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
10
15
20
25
30
40
50
1.0
1.6
3.3
4.9
6.6
8.2
9.8
13
16
20
26
33
49
66
82
98
131
164
30
75
150
225
300
- - -
Standard Cable Lengths
feet
98
246
492
738
984
- - -
+ 4 % (or 50 mm) of length-0% of lengthwhichever is greater
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 79
4
Cable that meets the requirements ofEN50170-2-2:1996 for communicationsup to 12Mbaud.
Data Pair Shields
Type AWGColor Code
DCR (/1000ft) Insulation
Outer Jacket
Material Color Nominal O.D.
TypeDrain Wire
16.5 ΩΩΩΩΩ PE
PUR Purple8.1 mm(0.319 in)
Foil/Braid 22 AWG
2/22 AWGRed/Green
16.5 ΩΩΩΩΩ PE
PUR Purple8.0 mm(0.315 in)
Foil/Braid No Drain
2/22 AWGRed/Green
16.5 ΩΩΩΩΩ PE
2/22 AWGRed/Green
PVC Purple8.1 mm(0.319 in)
Foil/Braid 22 AWG
456AWM 20233 80°C 300V
NEC AWMCEC AWM-I/II A/B FT1
RB50683-*M
RB50708-*M
2/22 AWGRed/Green
16.5 ΩΩΩΩΩ PE
PVC Purple8.1 mm(0.319 in)
Foil/Braid 22 AWG RB50881-*M
458
AWM 20233 80°C 300V
4511
105°C 300V
NEC AWMCEC AWM-I/II A/B FT1
16.5 ΩΩΩΩΩ PE
PUR Plum8.1 mm(0.319 in)
2/22 AWGRed/Green
Foil/Braid 22 AWG
RB50692-*M
NEC PLTCCEC AWM-I/II A/B FT4
457
75°C 100V
NEC CMX
Approvals
455AWM 2464 75°C 300V
NEC PLTCCEC AWM-I/II A/B FT4
RB50672-*M
PROFIBUS®-DP Cable Specifications
* indicates length in meters.
See page 78 for standard bulk cable lengths.†
4510A
105°C 300V
† † See page 106 for flexlife performance.
Armorfast Cable† ††
2/22 AWGRed/Green
NEC PLTCCEC CM-CMG
16.5 ΩΩΩΩΩ PE
Aluminum Armor/PVC Purple 14.2 mm (.560 in)
RB50875-*MArmor Foil/Braid 22 AWG
††
††
† ††
Baud Rate (k baud)
Maximum Trunk Length
9.6 50093.7519.2 187.5 1500 12000
1200m 1200m 1200m 1000m 400m 200m 100m
Dwg†Bulk CablePart Number
A
A
A
A
A
B
B
A
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588080
PROFIBUS®-DP Cables, Extensions, eurofast®
x indicates cable type.* indicates length in meters.Refer to the Cordset Builder on www.interlinkbt.com for assistance with cordset/cable combinations.
RSSW
RSSW
RKSW
RKSW
Pin
(M
ale)
Socket (Female)
So
cket
(Fe
mal
e)
Pin (Male)
euro
fast
®
eurofast®
RKSW 45x-*MRSSW 45x-*M WSSW 45x-*M WKSW 45x-*M
RSSW WSSW 45x-*MRSSW RSSW 45x-*M RSSW WKSW 45x-*MRSSW RKSW 45x-*M
WSSW WSSW 45x-*M
RKSW RKSW 45x-*M RKSW WKSW 45x-*M
WSSW WKSW 45x-*M
WKSW WKSW 45x-*M
WSSW RKSW 45x-*M
1 Meter
Standard cable lengths are 0.3, 0.5, 1.0, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0 ,6.0 ,8.0 ,10 ,15....50M. Consult factory for other lengths.
WSSW WKSW
WSSW
WKSW
Example WSSW RKSW 45x- 1M
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 81
4
PROFIBUS®-DP Dimensions / Configuration
RKSWRSSW
1. N/C2. Green3. N/C4. Red5. Bare (shield drain)
Male Female
FKSDWEFSFDWE
WKSWWSSW
Pinouts
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588082
PROFIBUS®-DP Cables, Extensions, eurofast®
RSSW WSSW
Socket (Female)Pin (Male)
9-P
in S
ub D
Co
nnec
tor
eurofast®
FieldWireable 45x
D9S
D9SM/T
D9S/T
SD9S
Ter
min
ato
rN
ode
Str
aig
htM
aste
r
D9S/T 45x-*M
SD9S 45x-*M
D9SM/T 45x-*M
D9S 45x-*M
WSSW D9S/T 45x-*MRSSW D9S/T 45x-*M
RSSW D9S RSSW 45x-*M-*M RKSW D9S RKSW 45x-*M-*MWSSW D9S WSSW 45x-*M-*M
RSSW D9SM/T 45x-*M WSSW D9SM/T 45x-*M
RSSW SD9S RSSW 45x-*M-*M WSSW SD9S WSSW 45x-*M-*M RKSW SD9S RKSW 45x-*M-*M
RKSW WKSW
RKSW D9S/T 45x-*M WKSW D9S/T 45x-*M
WKSW D9S WKSW 45x-*M-*M
RKSW D9SM/T 45x-*M WKSW D9SM/T 45x-*M
WKSW SD9S WKSW 45x-*M-*M
PROFIBUS-DP D9 Sub Connector
D9SM D9S or D9S/T SD9S
Schematic for RSSW D9S RKSW 45x-*M-*M-with termination switch off
Schematic for RKSW D9S/T 45x-*M-with termination switch on
D9 Sub Connector
x indicates cable type.* indicates length in meters.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 83
4
RSSW/RKSW FSSDWE FKSDWE FSSDWE/FKSDWE
FSSDWE D9S/T 45x-*M FKSDWE D9S/T 45x-*M
WSSW/WKSW
RSSW D9S RKSW 45x-*M-*M WSSW D9S WKSW 45x-*M-*M
RSSW SD9S RKSW 45x-*M-*M WSSW SD9S WKSW 45x-*M-*M FSSDWE SD9S FSSDWE
45x-*M-*M
FKSDWE SD9S FKSDWE
45x-*M-*M
FSSDWE SD9S FKSDWE
45x-*M-*M
FKSDWE D9SM/T 45x-*MFSSDWE D9SM/T 45x-*M
FSSDWE D9S FSSDWE
45x-*M-*M
FKSDWE D9S FKSDWE
45x-*M-*M
FSSDWE D9S FKSDWE
45x-*M-*M
Pin (Male) /Socket (Female)
eurofast® eurofast® bulkhead
Socket (Female)Pin (Male) Pin(Male)/Socket(Female)
PROFIBUS®-DP D9 Sub Connector Examples
x indicates cable type.* indicates length in meters.
FSSDWE D9S FKSDWE 45x-*M-*M
RSSW D9S RKSW 45x-*M-*M
PROFIBUS®-DP Cables, Extensions, eurofast®
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588084
PROFIBUS®-DP Bus Tees
PROFIBUS-DP Bus Y-junction
RKSW 2RSSW 45
fully shielded eurofast® tee
PROFIBUS-DP tee (12 M baud), M 12x1
Dimensions Pin configuration Wiring diagram
S einfügen!eurofast® femaleeurofast® male
Dimensions Wiring diagramPin Configuration
eurofast® femaleeurofast® male
RKSW 2RSSW 45-0001
fully shielded eurofast® tee
PROFIBUS-DP tee (12 M baud), M 12x1
eurofast® femaleeurofast® male
Note: This part must be used when joining two tees together directly. A female terminating resistor will not work with this tee sincethere is no ground and power connection on the male side.
VB2/FSW/FKW/FSW 45
fully shielded eurofast®
PROFIBUS-DP tee (12 M baud), M 12x1
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 85
4
PROFIBUS®-DP -eurofast® Field Wireable Connectors
eurofast® female
rating: 3 A,36 VDC
eurofast® male
rating: 3 A,36 VDC
Straight
BMSWS 8151-8.5
BMWS 8151-8.5
Right Angle
BMWS 8251-8.5
BMSWS 8251-8.5
Fem
ale
Mal
e
Accepts 4-9 mm cable.
Accepts 4-9 mm cable. Accepts 4-9 mm cable.
Accepts 4-9 mm cable.
Assembly
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588086
PROFIBUS®-DP-Field Wireable D9 Connectors
Pinouts
1 - N/C
2 - N/C
3 - Red (Bus_B)
4 - N/C
5 - N/C
6 - N/C
7 - N/C
8 - Green (Bus_A)
9 - N/C
Right Angle Straight
Sta
ndar
dD
iag
nost
ic
PDP-Connector/D9SM
PDP-Connector/SD9SPDP-Connector/D9S
PROFIBUS®-DP – Feed Through Receptacles - type eurofast®
eurofast® feed-through receptacle,M 12 x 1• straight male/female connector• for premolded, reverse-keyed eurofast® cables
Type Applications Recommended Panel Cutout
0.63
15.9
FKW FSW 45/M12
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 87
4
eurofast® terminating resistor(M 12 x 1)• internal resistor• female eurofast® connector• reverse-keyed
PROFIBUS®-DP Terminating Resistors
eurofast® terminating resistor(M 12 x 1)• internal resistor• male eurofast® connector• reverse-keyed
RSSW 45-TR
Type Applications Wiring diagram/pin configuration
nominal voltage: 50 VDCinternal resistance: 330 Ω, 1/4 W (2)
220 Ω, 1/4 W
RKSW 45-TR
nominal voltage: 50 VDCinternal resistance: 330 Ω, 1/4 W (2)
220 Ω, 1/4 W
PROFIBUS®-DP Active Terminating Resistors
Type Wiring diagrams
PDP-TRA
nominal voltage: 50 VDCinternal resistance: 390 Ω, 1/4 W (2)
220 Ω, 1/4 W
The active terminating resistor PDP-TRA is used to terminate a PROFIBUS®-DP segment. Due to its external power supply it ispossible to connect/disconnect any of the bus occupants without causing interferences on the bus. An LED signals the powerstatus.
eurofast® connector
1. N/C2. Bus_A3. N/C4. Bus_B5. N/C
1. N/C2. GND3. N/C4. UI = 24 VDC5. N/C
minifast® connector
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588088
Circuit Board Connectors and OEM Receptacles
eurofast®
FKFDW 45 PCB
FSFDW 45 PCB
Panel Cut-out Board Layout (reference only**)
FKW 45 PCB KIT
FSW 45 PCB KIT
* indicates length in meters.** consult source drawing for board layout.Refer to page 78 for standard cable lengths.
FKFDW 45- *M
FSFDW 45- *M
Pinout 1. N/C2. Bus_A3. N/C4. Bus_B5. Bare
FemaleMale
WFSW 45 PCB
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 89
4
1 Meter
TURCK Power Cordsets for PROFIBUS®-DP-minifast® Connectors and Tees
For stainless steel coupling nuts: Change part number (RSM.... to RSV....).
minifast®
RSM 50-*M WSM 50-*M RKM 50-*M WKM 50-*M
RSM RSM 50-*M RSM RKM 50-*MRSM WSM 50-*M RSM WKM 50-*M
WSM WSM 50-*M WSM WKM 50-*M
RKM RKM 50-*M RKM WKM 50-*M
WKM WKM 50-*M
Pin (Male) Socket (Female)
Soc
ket
(Fem
ale)
WSM RKM 50-*M
RSM
RKM
RSM WSM RKM
Pin
(M
ale)
min
ifast
®
WKM
WKM
WSM
Example
For stainless steel coupling nuts: Change part number (RSM 2RKM.. to RSV 2RKV..).
minifast® Power Tee
RSM 2RKM 50
Schematic Part Number Applications
WSM RKM 50-1M
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588090
Specifications for PROFIBUS®-DP Systems
RSM 2RKM 50
WKMWSM
Pinouts
1. Black2. Blue3. Green/Yellow4. Brown5. White
Female minifast®Male minifast®
Dimensions
RKMRSM
Power Pair
NEC AWMCEC AWMFT1
DCR (/1000 ft) Insulation
6.9 ΩΩΩΩΩ PVC
Approvals AWGColor Code
5/18 AWGBk,Bu,Gn/Ye,Bn, Wh
Cable Type
50 AWM 2517
105°C 300V
Outer Jacket
PVC Yellow7.2 mm(.285 in)
Material Color Nominal O.D.
None
Shields
TypeDrain Wire
BulkCable
RF50549-*M
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 91
4
eurofast® 5-pin Field Wireable Connectors for PROFIBUS®-DP
Male eurofast®Female eurofast®
Rating: 3 A, 36 VDC Rating: 3 A, 36 VDC
Accepts 4-8 mm cable.
Straight Right Angle
Fem
ale
Mal
e
B 8151-0 B 8251-0
BS 8151-0 BS 8251-0
Accepts 4-8 mm cable.
Accepts 4-8 mm cable.Accepts 4-8 mm cable.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588092
Notes
4
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 93
I/O Cordsets
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588094
TURCK Valve Connectors and eurofast® Extensions
Cable
Connector
“A” Style (18 mm)
Without LED Indicator With LED Indicator
Standard Duty PVC
Standard Duty PUR
Standard Duty PUR
Standard Duty PVC
Heavy Duty Rubber
Heavy Duty Rubber
Mal
e eu
rofa
st®
Lead
ed E
nds
Straight
Standard
Automotive
IEC
VAS 22-A653-*M-RS 5.3T
VAS 22-A669-*M-RS 5.3T
VAS 22-A654-*M-RSE 5.3T
VAS 22-B653-*M-RS 5.3T
VAS 22-B669-*M-RS 5.3T
VAS 22-B654-*M-RSE 5.3T
VAS 22-B654-*M-WSE 5.3T
VAS 22-B669-*M-WS 5.3T
VAS 22-B653-*M-WS 5.3T
VAS 22-A654-*M-WSE 5.3T
VAS 22-A669-*M-WS 5.3T
VAS 22-A653-*M-WS 5.3T
VAS 22-A653-*M VAS 22-A669-*M VAS 22-B669-*MVAS 22-B653-*M
VAS 22-A642-*M VAS 22-A587-*M VAS 22-B587-*MVAS 22-B642-*MVAS 22-A654-*M VAS 22-B654-*M
VAY 22-A658-*M VAY 22-B658-*M
Dimensions
Right
For additional options, consult TURCK Tech Support (1-800-544-7769).
* indicates length in meters.
4
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 95
TURCK Valve Connectors and eurofast® Extensions
Cable
Connector
“B” Style (10 mm)
Without LED Indicator With LED Indicator
Standard Duty PVC
Standard Duty PUR
Standard Duty PUR
Standard Duty PVC
Heavy Duty Rubber
Heavy Duty Rubber
Mal
e eu
rofa
st®
Lead
ed E
nds
Straight
Standard
Automotive
IEC
VBS 2-A653-*M-RS 5.3T
VBS 2-A669-*M-RS 5.3T
VBS 2-A654-*M-RS E 5.3T
VBS 2-B653-*M-RS 5.3T
VBS 2-B669-*M-RS 5.3T
VBS 2-B654-*M-RSE 5.3T
VBS 2-B654-*M-WSE 5.3T
VBS 2-B669-*M-WS 5.3T
VBS 2-B653-*M-WS 5.3T
VBS 2-A654-*M-WSE 5.3T
VBS 2-A669-*M-WS 5.3T
VBS 2-A653-*M-WS 5.3T
VBS 2-A653-*M VBS 2-A669-*M VBS 2-B669-*MVBS 2-B653-*M
VBS 2-A642-*M VBS 2-A587-*M VBS 2-B587-*MVBS 2-B642-*MVBS 2-A654-*M VBS 2-B654-*M
VBY 2-B658-*MVBY 2-A658-*M
Dimensions
Right
For additional options, consult TURCK Tech Support (1-800-544-7769).
* indicates length in meters.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588096
TURCK Valve Connectors and eurofast® Extensions
Cable
Connector
“C” Style (8 mm)
Without LED Indicator With LED Indicator
Standard Duty PVC
Standard Duty PUR
Standard Duty PUR
Standard Duty PVC
Heavy Duty Rubber
Heavy Duty Rubber
Mal
e eu
rofa
st®
Lead
ed E
nds
Straight
Standard
Automotive
IEC
TC8S 2-A669-*M-RS 5.3T
TC8S 2-L669-*M-RS 5.3T
TC8S 2-L669-*M-WS 5.3T
TC8S 2-A669-*M-WS 5.3T
Dimensions
TC8S 2-A669-*M TC8S 2-L653-*M
TC8S 2-A653-*M-RS 5.3T
TC8S 2-A653-*M-WS 5.3T
TC8S 2-A653-*M
TC8S 2-A587-*MTC8S 2-A642-*M
TC8S 2-L653-*M-RS 5.3T
TC8S 2-L653-*M-WS 5.3T
TC8S 2-L669-*M
TC8S 2-L587-*MTC8S 2-L642-*M
.45.45.45.45.45
Right
For additional options, consult TURCK Tech Support (1-800-544-7769).
* indicates length in meters.
4
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 97
TURCK Valve Connectors and eurofast® Extensions
Cable
Connector
“I” Style (11 mm)
Without LED Indicator With LED Indicator
Standard Duty PVC
Standard Duty PUR
Standard Duty PUR
Standard Duty PVC
Heavy Duty Rubber
Heavy Duty Rubber
Mal
e eu
rofa
st®
Lead
ed E
nds
Straight
Standard
Automotive
IEC
VIS 2-A653-*M-RS 5.3T
VIS 2-A669-*M-RS 5.3T
VIS 2-A654-*M-RSE 5.3T
VIS 2-B653-*M-RS 5.3T
VIS 2-B669-*M-RS 5.3T
VIS 2-B654-*M-RSE 5.3T
VIS 2-B654-*M-WSE 5.3T
VIS 2-B669-*M-WS 5.3T
VIS 2-B653-*M-WS 5.3T
VIS 2-A654-*M-WSE 5.3T
VIS 2-A669-*M-WS 5.3T
VIS 2-A653-*M-WS 5.3T
VIS 2-A653-*M VIS 2-A669-*M VIS 2-B653-*M VIS 2-B669-*M
VIS 2-A642-*M VIS 2-A587-*M VIS 2-A654-*M VIS 2-B642-*M VIS 2-B587-*M VIS 2-B654-*M
VIY 2-A658-*M VIY 2-B658-*M
Dimensions
Right
For additional options, consult TURCK Tech Support (1-800-544-7769).
* indicates length in meters.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-588098
Turck eurofast® 2-Branch Molded Splitters
• for sensors with complementary outputs, split signal.• branches have picofast®
snap lock.• combines 2 sensors into the input connector.
VBRK 4.4-2ESM 3S
VBRS 4.4-2RK 4T-*/*
• for sensors with complementary outputs, split signal.• combines 2 sensors into 1 input connector.
• combines 2 sensors into 1 input connector.• allows open circuit detection on both inputs.
VBRS 4.5-2RK 4T-*/*/S818
5
Wiring diagramApplicationsType
Turck eurofast® 2-Branch Molded Splitters
For additional options, consult TURCK Tech Support (1-800-544-7769).
* indicates length in meters.
Wiring diagramApplicationsType
YB2-FSM 4.5-2FKM 4.5
• for sensors with complementary outputs, split signal.• branches have eurofast®
connectors.• combines 2 sensors into the input connector.
3
2
5
1
4
4
1
2
3
3
5
5
4
2
1
4
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 99
Dimensions
TURCK picofast® Cable and Connectors
For additional options, consult TURCK Tech Support (1-800-544-7769).
* indicates length in meters.
picofast® Pinouts
Female Male
pico
fast
®
picofast®
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880100
TURCK eurofast® Cable and Connectors
Dimensions
For additional options, consult TURCK Tech Support (1-800-544-7769).
euro
fast
®
eurofast®
* indicates length in meters.Replace 4.4 with 4.5 and add /S653 to the end of part number for 5-pin (4-wire and connected drain) with foil shield.
TURCK eurofast® Cordset, 8-pin
For additional options, consult TURCK Tech Support (1-800-544-7769).
WK
WS
RK RS
eurofast® PinoutsFemale Male
eurofast® Pinouts
Female MaleRKC 8T-*-RSC 8T
* indicates length in meters.
4
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 101
TURCK picofast® 3-pin Field Wireable ConnectorsMale picofast®Female picofast®
Accepts 3-5 mm cable.
Straight Right Angle
Fem
ale
Mal
e
B 5131-0 B 5231-0
BS 5131-0 BS 5231
Accepts 3-5 mm cable.
Rating: 3 A, 75 VDC Rating: 3 A, 75 VDC
Accepts 3-5 mm cable.
Accepts 3-5 mm cable.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880102
Cable Lengths and ConnectorsStandard lengths of pre-molded cordsets and bulk cable are listed below.
Cordsets Bulk Cable
meters feetmeters feet
0.3
0.5
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
10
15
20
25
30
40
50
1.0
1.6
3.3
4.9
6.6
8.2
9.8
13
16
20
26
33
49
66
82
98
131
164
30
75
150
225
300
- - -- - -- - -- - -- - -
Standard Cable Lengths
0-1 meter: +35 / - 0 mm> 1 m +85/-0 mm or +4% of length which ever is greater
Other lengths available upon request. Contact the factory at 1-888-546-5880. Unit Conversions:
1 meter = 3.28 feet1 meter = 39.8 inches
Tolerances:
Leaded End Color Codes and Connectors
1. N/C2. N/C3. Red 24. Red 15. Gray
1. N/C2. N/C3. Blue4. Brown5. Black
1. N/C2. N/C3. Black 24. Black 15. Gn/Yel
AutomotiveIECStandard
4
1
2
3
5
4
1
2
3
5
4
1
2
3
5
98
246
492
738
984
- - -- - -- - -- - -- - -
4
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 103
P=Poor F=Fair G=Good E=Excellent
TURCK Cable Characteristics
104 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Notes
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 105
5
Installations
106 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
PerformancePerformancePerformancePerformancePerformance
Flexlife cables and cordsets are designed to handle theabuse of constant motion and bending. To ensure this,FlexLife® cables undergo a series of rigorous tests to ensurelonger life in industrial settings. The tests exceed ASTM testsand MIL-specs for bend and torsional flex testing. In additionto their flexibility, they meet the signal attenuation require-ments of DeviceNet™ and PROFIBUS® networks.
The Bend Radius Test repeatedly bends the cable back and forth with a6.5 inch radius on a 180 degree plane, at a rate of 30 cycles per minute.During the test all conductors are monitored until a conductor fails. This“tick-tock” motion replicates the strenuous abuse of bending and contactwith industrial machines. Flexlife cables can withstand 10 million cycles ofthe Bend Radius Test.
The Torsional Flex Test repeatedly moves and twists the cable through 360degrees of torsional twisting. Simultaneously, it is rolling 14 inches back andforth over an eight inch diameter sheave, which remains in contact throughoutthe test. This action is continuous (30 cycles per minute) and replicates themost abusive robotic movements for an industrial cable. Again, all conductorsare monitored until a conductor fails. Flexlife cables withstand 10 million cyclesof the Torsional Flex Test.
Cable InstallationCable InstallationCable InstallationCable InstallationCable Installation
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 107
5
Cable Bundling TCable Bundling TCable Bundling TCable Bundling TCable Bundling Techniquesechniquesechniquesechniquesechniques
CorrectCorrectCorrectCorrectCorrect IncorrectIncorrectIncorrectIncorrectIncorrect
When bundling several cables together, always keep the bundle loose enough to move within itself. Tightly tiedbundles create both compression and tension stresses when the bundle is moved.
TTTTTying Cables with Cable Tying Cables with Cable Tying Cables with Cable Tying Cables with Cable Tying Cables with Cable Tiesiesiesiesies
CorrectCorrectCorrectCorrectCorrect IncorrectIncorrectIncorrectIncorrectIncorrect
When tying cable with self locking ties, always leave the ties loose enough for the cables to slide freely under the tie.Over-tightening will create stress concentrations that can cause the conductors to fail prematurely. Never tighten thetie to the point where the cable jacket becomes deformed or pinched.
108 InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880
Proper Bend Radius for Fixed and Moving ApplicationsProper Bend Radius for Fixed and Moving ApplicationsProper Bend Radius for Fixed and Moving ApplicationsProper Bend Radius for Fixed and Moving ApplicationsProper Bend Radius for Fixed and Moving Applications
Fixed ApplicationsFixed ApplicationsFixed ApplicationsFixed ApplicationsFixed ApplicationsMinimum bend radius 5 x cable diameterMinimum bend radius 5 x cable diameterMinimum bend radius 5 x cable diameterMinimum bend radius 5 x cable diameterMinimum bend radius 5 x cable diameter
Moving ApplicationsMoving ApplicationsMoving ApplicationsMoving ApplicationsMoving ApplicationsMinimum bend radius 10 x cable diameterMinimum bend radius 10 x cable diameterMinimum bend radius 10 x cable diameterMinimum bend radius 10 x cable diameterMinimum bend radius 10 x cable diameter
Proper management of cabling systems can mean the difference between a dependable and smooth operatinginstallation and costly recurring down time. The suggestions outlined below illustrate some of the common sources ofproblems and provide simple and effective solutions.
Providing sufficient bend radius will allow the cable to absorb the energy of bending over a greater portion of its length,increasing its effective working life. Small increases in the radius of the bend can produce substantial increases in cablelife.
Cable InstallationCable InstallationCable InstallationCable InstallationCable Installation
Eliminating Stress Points in Cable DressEliminating Stress Points in Cable DressEliminating Stress Points in Cable DressEliminating Stress Points in Cable DressEliminating Stress Points in Cable Dress
Strain ReliefStrain ReliefStrain ReliefStrain ReliefStrain ReliefCorrectCorrectCorrectCorrectCorrect IncorrectIncorrectIncorrectIncorrectIncorrect
Installing cables to allow for adequate stress loops and freedom of motion increases the life of the cables. InterlinkBT®
cordsets incorporate molded strain reliefs that will assist in preventing stress.
InterlinkBT® 3000 Campus Drive Minneapolis, MN 55441 Phone: (01) (763) 694-2300 Fax: (01) (763) 694-2399 Toll Free: 1-888-546-5880 109
5
VVVVVisit us at wwwisit us at wwwisit us at wwwisit us at wwwisit us at www.interlinkbt.com.interlinkbt.com.interlinkbt.com.interlinkbt.com.interlinkbt.com
Check the latest articles, literature updates and product releases.Complete listing of network cables and cordsets, interconnection products, accessories,I/O stations and modules, I/O systems and more.Use keywords and phrases to locate specific information.See page link above.Check out the events in your area.Contains a complete listing of catalogs, brochures, tutorials, CAD drawings and electronicnews releases from InterlinkBT®.
Contains company information and opportunities.The login page is to access the secure area for the InterlinkBT® sales channel.
What’What’What’What’What’s New:s New:s New:s New:s New:Products:Products:Products:Products:Products:
Search:Search:Search:Search:Search:TTTTTech Support:ech Support:ech Support:ech Support:ech Support:Calendar:Calendar:Calendar:Calendar:Calendar:Literature:Literature:Literature:Literature:Literature:
Contacts:Contacts:Contacts:Contacts:Contacts:
About Us:About Us:About Us:About Us:About Us:Login:Login:Login:Login:Login:
Sales - Find reps and distributors in your area.Partners - Lists affiliates and trade associationsIntegrators - Contains integrators business summaries and web site links.Us - Submit requests and comments
Web Site Features:Web Site Features:Web Site Features:Web Site Features:Web Site Features:
Link to support.interlinkbt.comLink to support.interlinkbt.comLink to support.interlinkbt.comLink to support.interlinkbt.comLink to support.interlinkbt.com*
Recommended