Bassio Portfolio

My Graduation Project

Cleopatra October

Mall Eiffel Tower

Steel Structural Design &

Shop Drawing

Tekla Modeling

My first steps in the world of BIM

Tekla 3D Model Showing specimen of Cleopatra October Mall Project

General Arrangement Drawing showing one of the steel moment

resistant frames

General Assembly Drawing showing one of the steel box columns

Assembly Drawings included

the material list for each single part

Albabten Antenna Pole: Tekla 3D model of the ring around the palm

tree

Clamp details and BOQ of the rings around the palm

tree

Building Design utilizing Revit-Robot Interoperability

Utilizing Revit-Robot Interoperability enabled me to initialize a quick design and easily check the capacity of the structure

Utilizing the design options in Revit to export many designs and to make a comparison between both of them

Using revit modeling

techniques, collaboration

and clash checking

3 Mega BIM projects using

Autodesk Revit

1.Mecca Holy Mosque Hospital Project

Revit 3D model linking the exterior Archetictural mass file to be coordinated with the structure

Area of parking contains ramps with edge curved beams

Coordination with architectural VL

circulation

Generating quantity take-off schedules

We divided the service building project to 9 central revit files in 3 zones with total 27 central revit files in each discipline

3D view of Zone12 only with all related 9 central

files linked together

2.Service Building Project

3D oriented revit view

showing one longitudinal section of the arch

Two tunnels at zone 15

One of the tunnels at zone 12

Revit 3D oriented view showing the outer Bridge at zone 12

Revit 3D oriented view showing the outer Bridge at zone 15

Different 3D views of different zones showing many aspects of the project with its large scale

My task as part of an Integrated Design Process Team was to initialize a BIM model to validate the design process early before the construction phase and to minimize RFI-s as possible. Extracting the

quantities of concrete. Preparing concrete

dimensions model for shop drawings. Coordinating between

all disciplines using Navisworks Manage. Preparing the clash

reports accordingly.

3. Mataf Expansion Project 3rd phase

Clash detection using Revit Navis interoperability

Coordinating the Reinforcement at the construction joints with plumbing system

Modeling the minarets of King Abdelaziz Gates with steel stairs inside its core.

Contact Information

Phone : +2 011 5050 65 23 E-mail : mahmoud.s.bassiony@gmail.com