Embed Size (px)
Citation preview
My Graduation Project
Cleopatra October
Mall Eiffel Tower
Steel Structural Design &
Shop Drawing
Tekla Modeling
My first steps in the world of BIM
Tekla 3D Model Showing specimen of Cleopatra October Mall Project
General Arrangement Drawing showing one of the steel moment
resistant frames
General Assembly Drawing showing one of the steel box columns
Assembly Drawings included
the material list for each single part
Albabten Antenna Pole: Tekla 3D model of the ring around the palm
tree
Clamp details and BOQ of the rings around the palm
tree
Building Design utilizing Revit-Robot Interoperability
Utilizing Revit-Robot Interoperability enabled me to initialize a quick design and easily check the capacity of the structure
Utilizing the design options in Revit to export many designs and to make a comparison between both of them
Using revit modeling
techniques, collaboration
and clash checking
3 Mega BIM projects using
Autodesk Revit
1.Mecca Holy Mosque Hospital Project
Revit 3D model linking the exterior Archetictural mass file to be coordinated with the structure
Area of parking contains ramps with edge curved beams
Coordination with architectural VL
circulation
Generating quantity take-off schedules
We divided the service building project to 9 central revit files in 3 zones with total 27 central revit files in each discipline
3D view of Zone12 only with all related 9 central
files linked together
2.Service Building Project
3D oriented revit view
showing one longitudinal section of the arch
Two tunnels at zone 15
One of the tunnels at zone 12
Revit 3D oriented view showing the outer Bridge at zone 12
Revit 3D oriented view showing the outer Bridge at zone 15
Different 3D views of different zones showing many aspects of the project with its large scale
My task as part of an Integrated Design Process Team was to initialize a BIM model to validate the design process early before the construction phase and to minimize RFI-s as possible. Extracting the
quantities of concrete. Preparing concrete
dimensions model for shop drawings. Coordinating between
all disciplines using Navisworks Manage. Preparing the clash
reports accordingly.
3. Mataf Expansion Project 3rd phase
Clash detection using Revit Navis interoperability
Coordinating the Reinforcement at the construction joints with plumbing system
Modeling the minarets of King Abdelaziz Gates with steel stairs inside its core.
