View
233
Download
0
Category
Preview:
Citation preview
A.R.C.
Concrete Reinforcing
Products.
Polythene film-duct tape.
Edgeform (formwork).
Polystyrene Pods and Pod spacers.
Trench Mesh –clips-supports and ligatures.
Reinforcing mesh and reinforcing bars.
Reinforcing support chairs to suit design.
Tie wire.
Other key features.
Takeoff and reinforcing scheduling service.
Crane equipped trucking for unloading direct to sites.
All components to produce a house slab compliant with relevant Australian
standards
The Offer
TYPICAL FLOOR LAYOUT
Slab Components
ARC's black and orange polythene has good mechanical strength,
consistent quality and a resistance to puncture and perforation.
Polythene conforms to Australian Standards AS2870, AS4347.6 and
AS1326.
Available in high and medium impact.
Provides a moisture and vapor barrier for use with slab on ground
construction.
Available in a range of thicknesses and roll sizes.
Can be used as a concrete underlay and as a curing blanket as it
slows the curing process by preventing the escape of heat and
moisture
Resists attacks by acid or alkaline soils and does not deteriorate
when it comes in contact with water.
Polythene Film
Edgeform is Laminated Veneer lumber (LVL), designed specifically for concrete form work
Edgeform is arrised and painted red for moisture protection and ready identification.
Edgeform is light , straight and more uniform than traditional alternatives.
Formwork -Edgeform
Polystyrene Pods
• A lightweight, strong void former made from expanded
polystyrene used in on ground concrete slabs.
• Decrease the amount of concrete required
• Complies to all relevant Australian Building codes and standards
• Made from recyclable materials
Trench mesh & Accessories Trench Mesh
Made from grade D500L ribbed
reinforcing wire, Trench Mesh is
made using a variety of longitudinal
wires up to 12mm diameter.
Wire Trench Mesh Clips
Steel Ligatures fabricated
to support the trench
mesh.
Reinforcing mesh.
All ARC mesh products meet the highest quality standards
and comply with all the requirements of the Australian
construction industry.
ARC Meshes:
- Comply with AS/NZS4671 and AS3600,
- Are ACRS certified,
- Have been manufactured in ISO 9001
accredited facilities.
Are rigorously tested at our in-house NATA accredited
laboratory.
ARC reinforcing steel products are all proudly Australian
made.
Reinforcing support chairs
and tie wire.
Full range of support chairs for both bar and mesh
available ( included in takeoff).
Tie wire available in different quantities and thickness
and also comes is non-coated or Galvanised finish.
Concrete slab pouring.
By others
All slab components supplied are to the relevant
Australian Standard.
The Process.
Email plans to Bunning’s Trade Rep
ARC to complete Takeoff
Bunning’s to price up quote
Bunning’s trade rep to present quotation for review and approval
Builder to raise order with Bunning’s Trade with signed approval
Order is placed
Delivery of order to site as per agreed
date
Can we help?
Bunnings welcome the opportunity to quote your next job.
72 hour quote turnaround.
Please contact your local Bunnings representative or call 133 062.
Recommended