A.R.C.

Concrete Reinforcing

Products.

Polythene film-duct tape.

Edgeform (formwork).

Polystyrene Pods and Pod spacers.

Trench Mesh –clips-supports and ligatures.

Reinforcing mesh and reinforcing bars.

Reinforcing support chairs to suit design.

Tie wire.

Other key features.

Takeoff and reinforcing scheduling service.

Crane equipped trucking for unloading direct to sites.

All components to produce a house slab compliant with relevant Australian

standards

The Offer

TYPICAL FLOOR LAYOUT

Slab Components

ARC's black and orange polythene has good mechanical strength,

consistent quality and a resistance to puncture and perforation.

Polythene conforms to Australian Standards AS2870, AS4347.6 and

AS1326.

Available in high and medium impact.

Provides a moisture and vapor barrier for use with slab on ground

construction.

Available in a range of thicknesses and roll sizes.

Can be used as a concrete underlay and as a curing blanket as it

slows the curing process by preventing the escape of heat and

moisture

Resists attacks by acid or alkaline soils and does not deteriorate

when it comes in contact with water.

Polythene Film

Edgeform is Laminated Veneer lumber (LVL), designed specifically for concrete form work

Edgeform is arrised and painted red for moisture protection and ready identification.

Edgeform is light , straight and more uniform than traditional alternatives.

Formwork -Edgeform

Polystyrene Pods

• A lightweight, strong void former made from expanded

polystyrene used in on ground concrete slabs.

• Decrease the amount of concrete required

• Complies to all relevant Australian Building codes and standards

• Made from recyclable materials

Trench mesh & Accessories Trench Mesh

Made from grade D500L ribbed

reinforcing wire, Trench Mesh is

made using a variety of longitudinal

wires up to 12mm diameter.

Wire Trench Mesh Clips

Steel Ligatures fabricated

to support the trench

mesh.

Reinforcing mesh.

All ARC mesh products meet the highest quality standards

and comply with all the requirements of the Australian

construction industry.

ARC Meshes:

- Comply with AS/NZS4671 and AS3600,

- Are ACRS certified,

- Have been manufactured in ISO 9001

accredited facilities.

Are rigorously tested at our in-house NATA accredited

laboratory.

ARC reinforcing steel products are all proudly Australian

made.

Reinforcing support chairs

and tie wire.

Full range of support chairs for both bar and mesh

available ( included in takeoff).

Tie wire available in different quantities and thickness

and also comes is non-coated or Galvanised finish.

Concrete slab pouring.

By others

All slab components supplied are to the relevant

Australian Standard.

The Process.

Email plans to Bunning’s Trade Rep

ARC to complete Takeoff

Bunning’s to price up quote

Bunning’s trade rep to present quotation for review and approval

Builder to raise order with Bunning’s Trade with signed approval

Order is placed

Delivery of order to site as per agreed

date

Can we help?

Bunnings welcome the opportunity to quote your next job.

72 hour quote turnaround.

Please contact your local Bunnings representative or call 133 062.