View
25
Download
1
Category
Preview:
Citation preview
Approved Supplier List /
Liste des fournisseurs approuvés
Page 1 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
A&M Aerospace Inc. A&M01U 2332, South Delaware Street Denver CO (Colorado) 80223 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
A&P Grinding A&P01U 1824 Railroad St. Corona CA 92880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
A&P Grinding A&P01U 1824 Railroad St. Corona CA 92880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
A&P Grinding A&P01U 1824 Railroad St. Corona CA 92880 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional Approval HPS-182 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or Over
A&P Grinding A&P01U 1824 Railroad St. Corona CA 92880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval ISO-9001 Quality Management System - Requirements
AAA Plating AAA02U 424, E. Dixon Street Compton CA (California) 90222-1420 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
AAA Plating AAA02U 424, E. Dixon Street Compton CA (California) 90222-1420 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
AAA Plating AAA02U 424, E. Dixon Street Compton CA (California) 90222-1420 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
AAA Plating AAA02U 424, E. Dixon Street Compton CA (California) 90222-1420 USA PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Accurate Ion Technologies Inc. ACC11U 10010 Miller Way South Gate CA (California) 90280 USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/8 Ion NitridingConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Accurate Ion Technologies Inc. ACC11U 10010 Miller Way South Gate CA (California) 90280 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval HPS-202 Solid Film Lubricant Application Conditional approval given to perform Solid Film Lubricant Application per MIL-PRF-46010.
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type I Anodic Coatings for Aluminum and Aluminum Alloys
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type II Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Southwest United Canada Inc. (Advanced Processing Inc.) ADV02C 8201, Keele Street, Unit #9 Concord ON (Ontario) L4K 1Z4 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Advanced Coating Techniques Inc. ADV04U 311 Wyandanch Av. Est Babylon NY (New York) 11704 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Advanced Coating Techniques Inc. ADV04U 311 Wyandanch Av. Est Babylon NY (New York) 11704 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-106 Penetrant Inspection Specify NDT Inspector Levels (2 and/or 3)Advanced Coating Techniques Inc. ADV04U 311 Wyandanch Av. Est Babylon NY (New York) 11704 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-110 Sulfuric Acid Anodizing of Aluminum AlloysConditional to techniques approvalAdvanced Coating Techniques Inc. ADV04U 311 Wyandanch Av. Est Babylon NY (New York) 11704 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-170 General Requirements for painting
Aerospace Welding AER03C 890 Michele-Bohec Blainville QC (Quebec) J7C 5E2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Aerospace Welding AER03C 890 Michele-Bohec Blainville QC (Quebec) J7C 5E2 Canada PSR-0232 Flame Spray CT-Coating H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-869 Flame SprayingConditional to approval of specific and detailed supplier procedure. - Conditional to
techniques approval.Aero Engineering & Mfg Co AER07U 28217, Crocker Avenue Valencia CA (California) 91355-1249 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Aero Engineering & Mfg Co AER07U 28217, Crocker Avenue Valencia CA (California) 91355-1249 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Aero Engineering & Mfg Co AER07U 28217, Crocker Avenue Valencia CA (California) 91355-1249 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Aero Engineering & Mfg Co AER07U 28217, Crocker Avenue Valencia CA (California) 91355-1249 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.
Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Aerospace Welding AER11U 2035, Granville Avenue Los Angeles CA (California) 90025 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing A - Approval HPS-111 Chromic Acid Anodizing of Aluminium Alloys
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1500 Cadmium-Titanium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Aerospace Metal Finishing AMF AER13C 71, Proctor Road Schomberg ON (Ontario) L0G 1T0 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement, Electrodepositon- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. - Limited to steel parts below 200ksi unless usage of this process has been specifically approved by engineering authority.
AeroTek Manufacturing Ltd AER15C 1449, Hopkins Street Whitby ON (Ontario) L1N 2C2 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement L - Limited Approval AMS-2430 Shot Peening Automatic Limited to Glass Bead peening only. For manual application, conditional to approval of specific and detailed supplier procedure.
AeroTek Manufacturing Ltd AER15C 1449, Hopkins Street Whitby ON (Ontario) L1N 2C2 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval AMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.AeroTek Manufacturing Ltd AER15C 1449, Hopkins Street Whitby ON (Ontario) L1N 2C2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
AeroTek Manufacturing Ltd AER15C 1449, Hopkins Street Whitby ON (Ontario) L1N 2C2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
AeroTek Manufacturing Ltd AER15C 1449, Hopkins Street Whitby ON (Ontario) L1N 2C2 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.AeroTek Manufacturing Ltd AER15C 1449, Hopkins Street Whitby ON (Ontario) L1N 2C2 Canada PSR-0229 IVD Aluminum or SputteringCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-83488 Coating, Aluminum, High Purity Conditional per HD ENG MEO -609Eaton Aeroquip Group AER15U P.O. Box 2473, Station A Toronto ON (Ontario) M5W 2K6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Aerometals AER23U 3920 Sandstone Drive, El, Dorado Hills CA (California) 95762 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Aerometals AER23U 3920 Sandstone Drive, El, Dorado Hills CA (California) 95762 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
Aerocraft Heat Treating AER25U 15701, Minnesota Avenue Paramount CA (California) 90723 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw Materials Conditional to pyrometry per PSR-0215.Aero Precision Industries AER27U 30, Lindhergh Avenue Livermore CA (California) 94551 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 2 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Aerosphere AER29C 21, Chemin de l'aviation, suite 100; Pointe-ClairePointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening, AutomaticConditional to Clean Shot Peen per PSR-0187.
Limited to manual Application. Glass Bead Peening not authorized.
SDR approval must be granded.
Aerosphere AER29C 21, Chemin de l'aviation, suite 100; Pointe-ClairePointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal PartsConditional to Clean Shot Peen per PSR-0187.
Limited to manual Application. Glass Bead Peening not authorized.Aerosphere AER29C 21, Chemin de l'aviation, suite 100; Pointe-ClairePointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Aerosphere AER29C 21, Chemin de l'aviation, suite 100; Pointe-ClairePointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Aerosphere AER29C 21, Chemin de l'aviation, suite 100; Pointe-ClairePointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal PartsConditional to Clean Shot Peen per PSR-0187.
Upon approval of SDR.
Aerosphere AER29C 21, Chemin de l'aviation, suite 100; Pointe-ClairePointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to Clean Shot Peen per PSR-0187.
Limited to manual Application. Glass Bead Peening not authorized.Aerocom Inspection Service AER32C 2222 S.Sheridan Way Unit no. 221 Mississauga, ON (Ontario) Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
Aerospace Precision Metals AER32U 2160 N Andrews Avenue Extension Pompano Beach Florida USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
Aerospace Precision Metals AER32U 2160 N Andrews Avenue Extension Pompano Beach Florida USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
AeroControlex Group AER37U 4223 Monticello Blvd South Euclid Ohio 44121 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers with Design
AeroControlex Group AER37U 4223 Monticello Blvd South Euclid Ohio 44121 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS 9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2770 Heat Treatment of Wrought Aluminum Alloy PartsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO code Number S-749
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-DepositionConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.
RBC AeroStructures (formerly A.I.D company) AID01U 123 Commerce Way Westminster SC (South Carolina)29693 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
RBC Aerostructures AID01U 123 Commerce Way Westminster SC 29693 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
RBC Aerostructures AID01U 123 Commerce Way Westminster SC 29693 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
A.T.L.A.S. Aeronautik (Air/Terre Equipment Inc.) AIR04C 420, rue Edouard Granby QC (Quebec) J2G 3Z3 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
A.T.L.A.S. Aeronautik (Air/Terre Equipment Inc.) AIR04C 420, rue Edouard Granby QC (Quebec) J2G 3Z3 Canada NONE - NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-8879 Screw Threads, UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter, General Specification for
A.T.L.A.S. Aeronautik (Air/Terre Equipment Inc.) AIR04C 420, rue Edouard Granby QC (Quebec) J2G 3Z3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
A.T.L.A.S. Aeronautik (Air/Terre Equipment Inc.) AIR04C 420, rue Edouard Granby QC (Quebec) J2G 3Z3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
A.T.L.A.S. Aeronautik (Air/Terre Equipment Inc.) AIR04C 420, rue Edouard Granby QC (Quebec) J2G 3Z3 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
A.T.L.A.S. Aeronautik (Air/Terre Equipment Inc.) AIR04C 420, rue Edouard Granby QC (Quebec) J2G 3Z3 Canada PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsConditional grated based on parts for Eng'r new program
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2772 Heat Treatment of Aluminum Alloy Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6088 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forgings and Castings
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Arconic Forgings & Extrusions ALC01U / ALC05U 1600, Harvard Avenue, PO Box 05900 Cleveland OH (Ohio) 44105-3092 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B594 Aluminum Alloy Wrought Products for Aerospace Applications, Ultrasonic Inspection ofConditional to NDT personnel certification per PSR0310Alcoa Fastening Systems ALC06U 3000 West Lomita Blvd Torrance CA (California) 90505 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Alcoa Fastening Systems ALC06U 3000 West Lomita Blvd Torrance CA (California) 90505 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
ALFA Aviation Services In. ALF01U 3224, avenue Jacques Bureau Laval QC (Quebec) H7P 0A9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Alloys International Inc. ALL01U 85-J, South Hoffman Lane Central Islip (Islandia) NY (New York) 11722 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
All Precision Instrument Inc. ALL19U 6751 Engle Road Middleburg Heights OH (Ohio) 44130 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Allied one Industrial Inc. ALL22U 6225 Danville Road Mississauga ON (Ontario) L5T 2H7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Allied one Industrial Inc. ALL22U 6225 Danville Road Mississauga ON (Ontario) L5T 2H7 Canada PSR-0010 Quality Assurance Systems and Related Systems A - Approval HPS-020 Digital Product Definition / Model Based Definition
Alphacasting Inc. ALP01C 391, avenue Ste-Croix; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4N 2L3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Alphacasting Inc. ALP01C 391, avenue Ste-Croix; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4N 2L3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Alphacasting Inc. ALP01C 391, avenue Ste-Croix; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4N 2L3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemL - Limited Approval HPS-020 Digital Product Definition / Model Based DefinitionWith limitations to P/N: 200-5521-501 castings and monitored by machining house for
machined part 200-521-101.Alp Havacilik San. Ve Tic A.S. ALP06U Organize Sanayi Bölgesi, 8. Cadde, No: 29/1-2Odunpazarı ESKİŞEHİR 26110 Turkey PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Alta Précision Inc. ALT01C / ALT04U 11120 Colbert, Ville d'Anjou Anjou (Montreal) QC (Quebec) H1J 2S1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Alta Précision Inc. ALT01C / ALT04U 11120 Colbert, Ville d'Anjou Anjou (Montreal) QC (Quebec) H1J 2S1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Alta Précision Inc. ALT01C / ALT04U 11120 Colbert, Ville d'Anjou Anjou (Montreal) QC (Quebec) H1J 2S1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Alta Précision Inc. ALT01C / ALT04U 11120 Colbert, Ville d'Anjou Anjou (Montreal) QC (Quebec) H1J 2S1 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requiremetns for Painting
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2772 Heat Treatment of Aluminum Alloy Raw Materials- Conditional to Pyrometry per AMS2750. - Conditional to Operator qualification per ARP1962 for straightening operations.
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6088 Heat Treatment of Aluminum Alloys - Conditional to Pyrometry per AMS2750. - Conditional to Operator qualification per ARP1962 for straightening operations.
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0307 Hardness Inspection MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E10 Standard Test Method for Brinell Hardness of Metallic Materials
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant Testing- Conditional to NDT personnel certification per PSR0310
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 3 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0307 Hardness Inspection MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E3 Standard Practice for Preparation of Metallographic Specimens
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E407 Standard Test Method for Microetching Metals and Alloys
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E8 Standard Test Methods of Tension Testing of Metallic Materials
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Aluminum Precision Products ALU01U 3333, West Warner Avenue Santa Ana CA (California) 92704-5316 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Equipment class 5, instrumentation type D.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per PSR-0215. Conditional to usage with AMS 2759/9. Limited to
Hydrogen embrittlement relief baking related to PSR-0185 and PSR-0171 approvals.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to Pyrometry per PSR-0215. Limited to Hydrogen embrittlement relief baking
related to PSR-0185 and PSR-0171 approvals.AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0505 Corrosion/Salt Spray TestingMTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B117 Standard Practice for Operating Salt Spray (Fog) ApparatusLimited to PSR0185 approval.AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0512 Adhesion Bend Testing (Metallic Coatings)MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B571 Qualitative Adhesion Testing of Metallic CoatingsLimited to PSR0185 approval.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing L - Limited Approval HPS-113 Chemical Film Treament for Aluminium AlloysImmersion method TY I and / or TY II using MIL-DTL-81706 QPD material limited to PSR0185
approval.
Limited to type I, Class 1A only, by immersion only.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment A - Approval HPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR-0215. Limited to Hydrogen embrittlement relief baking
related to PSR-0185 and PSR-0171 approvals.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing A - Approval HPS-171 Stripping of Inorganic coatings
Conditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.
Limited to aluminum plating over steel stripping using Speciality 835 etch from U.S. Speciality
color corp.AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0173 Cleaning CP-Chemical Processing A - Approval HPS-173 Cleaning of inorganic Coating Limited to using oakite NST as Degreaser for PSR0185
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0206 Abrasive Blasting CP-Chemical Processing A - Approval HPS-206 Abrasive BlastingLimited to surface preparation for pure electrodeposited AlumiPlate aluminum using
aluminum oxide 80 to 120 grit in accordance with AlumiPlate spec 2.01.00.008 Process OSB07.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0215 Pyrometry HT-Heat Treatment A - Approval HPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysImmersion method TY I and / or TY II using MIL-DTL-81706 QPD material limited to PSR0185
approval.
Limited to type I, Class 1A only, by immersion only.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0185 Electrodeposition of Aluminum PlatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-83488 Coating, Aluminum, High PurityConditional to techniques approval for TY I & TY II of pure electrodeposited Alumiplate
aluminum. Limited to electrodeposited Alumiplate aluminum.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0206 Abrasive Blasting CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1504 Abrasive BlastingLimited to surface preparation for pure electrodeposited AlumiPlate aluminum using
aluminum oxide 80 to 120 grit in accordance with AlumiPlate spec 2.01.00.008 Process OSB07.
AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.AlumiPlate ALU02U 8960, Springbrook Drive Minneapolis MN (Minnesota) 55433-5874 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
American Gas & Chemical Company Ltd AME05U 220, Pegasus Avenue Northvale NJ (New Jersey) 07647-1977 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
American Stress Technologies AME09U 540 Alpha Dr., Pittsburgh PA (Pennsylvania)15238 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
American Aircraft Parts Manufacturing Company AME25U 44801 Centre Court East Clinton Township Michigan 48038 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
American Aircraft Parts Manufacturing Company AME25U 44801 Centre Court East Clinton Township Michigan 48038 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
American Aircraft Parts Manufacturing Company AME25U 44801 Centre Court East Clinton Township Michigan 48038 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-012 Delegated Supplier Inspection Program
Anaheim Precision ANA02U 409 W. Blueridge Orange CA (California) 92865 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Anaheim Precision ANA02U 409 W. Blueridge Orange CA (California) 92865 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Anaheim Precision ANA02U 409 W. Blueridge Orange CA (California) 92865 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Anachem Ltee ANA06C 255, rue Norman Lachine QC (Quebec) H8R 1A3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Angle Calibration ANG02U 40 South Lane Troy OH (Ohio) 45373 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Angle Calibration ANG02U 40 South Lane Troy OH (Ohio) 45373 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-17025 General requirements for the competence of testing and calibration laboratories
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2416 Plating, Nickel-Cadmium Diffused
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I.Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing A - Approval HPS-111 Chromic Acid Anodizing of Aluminium Alloys
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing C - Conditional Approval MIL-A-8625, Type II Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.
Anillo Industries ANI01U 2090, North Glassell Streel Orange CA (California) 92865-5566 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Anoroc Precision Sheet Metal Inc ANO05U 14831, S. San Pedro Street Gardena CA (California) 90248-2030 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Apexx Omni-Graphic APP03U 58-29 64TH Street Maspeth NY (New York) 11378-2836 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Applus RTD Formerly Staverly APP06C 71, Proctor road Schomberg ON (Ontario) L01 1T0 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval ASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Specify inspesctor Level (2 and/or 3)
Applus RTD Formerly Staverly APP06C 71, Proctor road Schomberg ON (Ontario) L01 1T0 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval ASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Applus RTD Formerly Staverly APP06C 71, Proctor road Schomberg ON (Ontario) L01 1T0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Applus RTD Formerly Staverly APP06C 71, Proctor road Schomberg ON (Ontario) L01 1T0 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR-0310.
Applus RTD Formerly Staverly APP06C 71, Proctor road Schomberg ON (Ontario) L01 1T0 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Subject to techniques approval.
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 4 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Applus RTD Formerly Staverly APP07C 5305, John Lucas Road, Unit 1 Burlington ON (Ontario) L7I 6A8 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.ASC0 Industries n.v. ASC02U Weideldlaan 2. B-1930 Zaventem Phoenix Belgium Belgium PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Asko Processing Inc. ASK01U 434 North 35th Seattle WA (Washington)98103 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Asko Processing Inc. ASK01U 434 North 35th Seattle WA (Washington)98103 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Astro Manufacturing & Design AST01U 34459, Curtis Blvd. Eastlake OH (Ohio) 44095 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Asturies MFG AST02U 310 Cessna Circle Corona CA (California) 92880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Asturies MFG AST02U 310 Cessna Circle Corona CA (California) 92880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Astro Aluminum Treating Co. Inc. AST03U 11040 Palmer Ave, South Gate CA (California) 90280 USA PSR-0256 Quality Assurance Systems and Related SystemsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2772 Heat Treatment of Aluminum Alloy Raw MaterialsConditional to Pyrometry per AMS2750. -- Conditional to Operator qualification per ARP1962 for straightening operations.
Astro Aluminum Treating Co. Inc. AST03U 11040 Palmer Ave, South Gate CA (California) 90280 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
A-Tech Instruments LTD ATE08C PO box 252 Scarborough ON (Ontario) M1E 4R5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Atlantic Aero ATL01U 1322, South Park Drive Kernersville NC (North Carolina)27284-3151 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Aubert & Duvall AUB02O 75 boul. de la Libération; BP 173 Pamiers - F09102 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Auger Industries AUG01U 390 Crowther Avenue Placentia CA (California) 92870 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Auger Industries AUG01U 390 Crowther Avenue Placentia CA (California) 92870 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
Aurora Bearing Company AUR01U 970, South Lake Street Aurora IL (Illinois) 60506-5954 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Arnprior Aerospace Montreal Inc. (Aviation Lemex) AVI02C 4861, Chemin de la Savane Saint-Hubert QC (Quebec) J3Y 9G1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Arnprior Aerospace Montreal Inc. (Aviation Lemex) AVI02C 4861, Chemin de la Savane Saint-Hubert QC (Quebec) J3Y 9G1 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting Restriction Drying oven not to be used (not Certified).Arnprior Aerospace Montreal Inc. (Aviation Lemex) AVI02C 4861, Chemin de la Savane Saint-Hubert QC (Quebec) J3Y 9G1 Canada PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsConditional grated based on parts for Eng'r new programArnprior Aerospace Montreal Inc. (Aviation Lemex) AVI02C 4861, Chemin de la Savane Saint-Hubert QC (Quebec) J3Y 9G1 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Arnprior Aerospace Montreal Inc. (Aviation Lemex) AVI02C 4861, Chemin de la Savane Saint-Hubert QC (Quebec) J3Y 9G1 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Avion Technologies Inc. AVI15C 1203 Lorimar Dr Mississauga ON (Ontario) L5S 1M9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Avion Technologies Inc. AVI15C 1203 Lorimar Dr Mississauga ON (Ontario) L5S 1M9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Avion Technologies Inc. AVI15C 1203 Lorimar Dr Mississauga ON (Ontario) L5S 1M9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-020 Digital Product Definition /model Based Definition
CanRep Inc. AVT01C 12912 Brault, Mirabel Quebec J7J 0W4 canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemL - Limited Approval HPS-010 Quality Assurance Requirements for SuppliersR&O Maintenance Only
AvtechTyee AVT04U 6500 Merrill Creek Pkwy; Everett WA (Washington)98203 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
AvtechTyee AVT04U 6500 Merrill Creek Pkwy; Everett WA (Washington)98203 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
AvtechTyee AVT04U 6500 Merrill Creek Pkwy; Everett WA (Washington)98203 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-9001 Quality Management System - Requirements
AW-Lake Co. AWC01U 2440 W. Corporate Preserve Dr. # 600 Oak Creek WI (Wisconsin) 53154 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
AW-Lake Co. AWC01U 8809 Industrial Drive Franksville WI (Wisconsin) 53126 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Bearing Bronze Ltd. BEA03C / BEA03U 360, Sheldon Dr. Cambridge ON (Ontario) N1T 1A9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Bearing Bronze Ltd. BEA03C / BEA03U 360, Sheldon Dr. Cambridge ON (Ontario) N1T 1A9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Bertrand Products Inc. BER03U 2323 Foundation Dr. South Bend IN 46628 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Bertrand Products Inc. BER03U 2323 Foundation Dr. South Bend IN 46628 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Betatronix LLC BET03U 110, Nicon Court Hauppauge NY (New York) 11788 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Betatronix LLC BET03U 110, Nicon Court Hauppauge NY (New York) 11788 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels Conditional to approval of specific and detailled supplier procedure.
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0215 Pyrometry HT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 PyrometrySpecify equipment classes and instrumentation types for each furnace and/or oven 975 Class
5 Type D
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to pyrometry per PSR-0215. Conditional to usage with AMS 2759/9 and AMS-
2759/11.B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to pyrometry per PSR-0215.B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems- Conditional to approval of specific and detailled supplier procedure. - Specify method and type used.
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Brush, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Brush, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Immersion, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Immersion, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
B-G Detection Service Inc. BGD01U 9235 Glenoaks Blvd Sun Valley CA (California) 91352-2625 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Treatments for Corrosion-Resistant steels (Superseded by AMS-QQ-P-35)Conditional to approval of specific and detailled supplier procedure.Blue Aerospace BLU01U 6211 Nob Hill Road Tamarac FL (Florida) 33321 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
Blue Aerospace BLU01U 6211 Nob Hill Road Tamarac FL (Florida) 33321 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Exova (Bodycote) - Pointe-Claire BOD01C 121 Hymus Blvd Pointe-Claire (Montreal) QC (Quebec) H9R 1E6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel Parts
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel Parts
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a Vacuum
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA NONE - HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2774 Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw Materials
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Bodycote Thermal Processing BOD02U 9921, Romandel Avenue Santa Fe Springs CA (California) 90670 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Bodycote Thermal Processing BOD04U 710 Burns Street Cincinnati OH (Ohio) 45204 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat treatment Precipitation Hardening Corrosion Resistant and Maraging steel partsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.Bodycote Thermal Processing BOD04U 710 Burns Street Cincinnati OH (Ohio) 45204 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Bodycote (Mclean) BOD05U 1019 McLean Blvd, Wichita KS (Kansas) 67213 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Steels; CL-A.
Bodycote (Mclean) BOD05U 1019 McLean Blvd, Wichita KS (Kansas) 67213 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote (Mclean) BOD05U 1019 McLean Blvd, Wichita KS (Kansas) 67213 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote (Mclean) BOD05U 1019 McLean Blvd, Wichita KS (Kansas) 67213 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Bodycote (Mclean) BOD05U 1019 McLean Blvd, Wichita KS (Kansas) 67213 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote (Mclean) BOD05U 1019 McLean Blvd, Wichita KS (Kansas) 67213 USA PSR-0268 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/7 Carburizing and Heat Treatment of Carburizing Grade Steel PartsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Bodycote (Mclean) BOD05U 1019 McLean Blvd, Wichita KS (Kansas) 67213 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Exova (Bodycote) - Mississauga BOD06C Unit 11, 1440 Graham's Lane, Burlington ON (Ontario) L7S 1W3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 5 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0254 Heat Treatment HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment A - Approval HPS-216 Heat Treatment of Corrosion - Resistant SteelConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Thermal Processing BOD08U 4008 Clay Ave. Suite 200 Haltom City TX (Texas) 76117 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0307 Hardness Inspection MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAC-7102/5 Nadcap Audit Criteria for Hardness Testing for Heat Treating
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0251 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0255 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements- Conditional to Pyrometry per AMS 2750.
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of steel parts, General Requirements- Conditional to Pyrometry per AMS 2750.
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0251 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0251 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0255 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/6 Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts- Conditional to Pyrometry per AMS 2750.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/7 Carburizing and Heat Treatment of Carburizing Grade Steel Parts- Conditional to Pyrometry per AMS 2750.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/8 Ion Nitriding - Conditional to Pyrometry per AMS 2750.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw Materials - Conditional to Pyrometry per AMS 2750.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-6090 Steels used in Aircraft Carburizing and Nitriding, Process for- Conditional to Pyrometry per AMS 2750.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0307 Hardness Inspection MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E10 Standard Test Method for Brinell Hardness of Metallic Materials
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0307 Hardness Inspection MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0504 Microhardness MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E384 Standard Test Method For Microindentation Hardness of Materials
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Supplier - Conditional to Pyrometry per AMS 2750.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875 Heat Treatment of Steel, Raw Material - Conditional to Pyrometry per AMS 2750.Bodycote Worcester BOD14U 284 Grove St. Worcester Massachusetts 01605 USA PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-6090 Steels used in Aircraft Carburizing and Nitriding, Process for- Conditional to Pyrometry per AMS 2750.Voestapline Bohler Aerospace BOH01C Mariazeller Strasse 25 Kapfenberg Austria A8605 Austria PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Voestapline Bohler Aerospace BOH01C Mariazeller Strasse 25 Kapfenberg Austria A8605 Austria PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Voestapline Bohler Aerospace BOH01C Mariazeller Strasse 25 Kapfenberg Austria A8605 Austria PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Bourdelais Grinding Co. Inc. BOU10U 4550 Runway Street Simi Valley CA 93063 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Bourdelais Grinding Co. Inc. BOU10U 4550 Runway Street Simi Valley CA 93063 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Bourdelais Grinding Co. Inc. BOU10U 4550 Runway Street Simi Valley CA 93063 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Bourdelais Grinding Co. Inc. BOU10U 4550 Runway Street Simi Valley CA 93063 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional Approval HPS-182 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or Over
Bourdelais Grinding Co. Inc. BOU10U 4550 Runway Street Simi Valley CA 93063 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval ISO-9001 Quality Management System - Requirements
Bourdelais Grinding Co. Inc. BOU10U 4550 Runway Street Simi Valley CA 93063 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional Approval MIL-STD-866 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or Over
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0482 CMSP-Conventional Machining as a Special ProcessCMSP-Conventional Machining as a Special ProcessC - Conditional Approval AMS-2440 Inspection of Ground. Chromium Plated Parts-Conditional to Techniques approal and acceptance of Barkhausen Noise Inspection by P/N for First Production Batch
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0215 Pyrometry HT-Heat Treatment C - Conditional Approval AMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to pyrometry per PSR-0215. Conditional to usage with AMS 2759/9 and AMS-
2759/11.Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to pyrometry per PSR-0215.Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0505 Corrosion/Salt Spray TestingMTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B117 Standard Practice for Operating Salt Spray (Fog) ApparatusLimited to PSR0185 approval.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113 Chemical Film Treament for Aluminium Alloys-Conditional to Annual operator Qualification for Brush Operation; - Specify method used
(immersion and/or brush) and type used (I: with Cr6+; II; without Cr6+)
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to pyrometry per PSR-0215.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-135 Cadmium Plating Low EmbrittlementConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0175 Chromium Plating CP-Chemical Processing A - Approval HPS-175 Chromium Plating (electrodeposited Low Embritlement)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
chrome plating on low-alloy steels and/or nickel plating & Conditional to techniques approval.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0190 Cadmium Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless SteelConditional to approval of specific and detailed supplier procedure. Specify method and type
used.Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0215 Pyrometry HT-Heat Treatment C - Conditional Approval HPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing A - Approval HPS-306 Pre-penetrant Etch of Low Alloy Steels & corrosion resistant steels & aluminum alloys & titanium alloys
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing A - Approval HPS-306 Pre-penetrant etch of corrosion resistant steels
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type I Anodic Coatings for Aluminum and Aluminum AlloysType I.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, Immersion, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, Immersion, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Immersion, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Immersion, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 6 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
chrome plating on low-alloy steels and/or nickel plating & Conditional to techniques approval.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0107 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating chromiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Brampton Processing BRA07C 171, Advance Blvd. #19 & 20 Brampton ON (Ontario) L6T 4Z6 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320, Class 2 Chromium Plating (Electroeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Bramden Precision BRA11C 1-200 Pony Drive Newmarket ON (Ontario) L3Y 7B6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Broad View Instrumentation Services Inc. BRO02U 7632 Hub Parkway Valley View OH (Ohio) 44125 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Broad View Instrumentation Services Inc. BRO02U 7632 Hub Parkway Valley View OH (Ohio) 44125 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Buehler Canada BUE01C 10, Carlow Court #2 Whitby ON (Ontario) L1N 9T7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Buehler Canada BUE01C 10, Carlow Court #2 Whitby ON (Ontario) L1N 9T7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2770 Heat Treatment of Wrought Aluminum Alloy PartsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Steels; CL-A.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless and PH Stainless Steels; CL-D.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Stainless Steels; CL-B.Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0527 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0527 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E8 Standard Test Methods of Tension Testing of Metallic Materials
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0504 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E384 Standard Test Methods for Microidentation Hardness of
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0307 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E110 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0307 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0257 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0257 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-7199 Heat treatment of Wrough Copper-Beryllium alloys, process for (C17000, C17200, C17300, C17500, and C17510).Conditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2771 Heat Treatment of Aluminum Alloy CastingsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2772 Heat Treatment of Aluminum Alloy Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6088 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6088 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0253 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-216 Heat Treatment of Corrosion - Resistant SteelConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, Class D Heat Treatment of Steel, Process forConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0215 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0215 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0010 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0010 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0122 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-122 Cold stabilization of ferrous alloyrs - Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0122 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0122 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion-Resistant Steel Parts- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0122 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel, Raw Materials- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0122 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875 Heat Treatment of Steel, Raw Material - Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0251 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0251 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, Class A Heat Treatment of Steel Raw Materials Conditional to pyrometry per AMS-2750. Class A.
Burton industries BUR01U 243, Wyandanch avenue West Babylon NY (New York) 11704-1593 USA PSR-0251 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS A Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to operator
qualification per ARP-1962 for straightening operationsBurbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0307 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAC-7102/4 Nadcap Audit Criteria for Hardness Testing for Heat Treating
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0215 Heat Treatment HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2755 Nitriding, Molten Salt BathConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to pyrometry per PSR-0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless and PH Stainless Steels; CL-D.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless and PH Stainless Steels; CL-D.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0255 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements- Conditional to Pyrometry per AMS 2750.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 7 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress Relief of Steel Parts Conditional to pyrometry per PSR-0215. limited to stress relief only.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel Parts- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0255 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/6 Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts- Conditional to Pyrometry per AMS 2750.Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to pyrometry per PSR-0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0254 Heat Treatment HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0255 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0257 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2801 Heat Treatment of Titanium Alloy PartsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel, Raw Materials- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw Materials - Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class A Heat Treatment of Steel Raw Materials - Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class B Heat Treatment of Steel Raw Materials - Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class C Heat Treatment of Steel Raw Materials - Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class D Heat Treatment of Steel Raw Materials - Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0257 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-7199 Heat treatment of Wrough Copper-Beryllium alloys, process for (C17000, C17200, C17300, C17500, and C17510).Conditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekCryogenic Treatments (AC7102) Nadcap Audit Criteria for Heat Treating
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-129 Stress Relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR0215. Conditional to usage with ams2759/9 and/or
AMS2759/11Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-9001 Quality Management System - Requirements
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875 Heat Treatment of Steel, Raw Material - Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875 Heat Treatment of Steel, Raw Materials- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, Class A Heat Treatment of Steel, Raw Materials- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875. Class B Heat Treatment of Steel, Raw Materials- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875. Class C Heat Treatment of Steel, Raw Materials- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875. Class D Heat Treatment of Steel, Raw Materials- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Burbank Steel Treating Inc. BUR13U 415 South Varney Street Burbank CA 91502 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Busby Metals Inc. BUS01U 55 Davids Drive Hauppauge NY (New York) 11788 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
Busby Metals Inc. BUS01U 55 Davids Drive Hauppauge NY (New York) 11788 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Busby Metals Inc. BUS01U 55 Davids Drive Hauppauge NY (New York) 11788 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
California Drop Forge CAL05U 1033, Alhambra Ave. Los Angeles CA (California) 90012 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
California Drop Forge CAL05U 1033, Alhambra Ave. Los Angeles CA (California) 90012 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
California Drop Forge CAL05U 1033, Alhambra Ave. Los Angeles CA (California) 90012 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
California Drop Forge CAL05U 1033, Alhambra Ave. Los Angeles CA (California) 90012 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Caledon Laboratories CAL06C 40, Armstrong Avenue Georgetown ON (Ontario) L7G 4R9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Caledon Laboratories CAL06C 40, Armstrong Avenue Georgetown ON (Ontario) L7G 4R9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
CAL Tech Process Management LLC CAL08U 1400 Grance Hall Road Suite 500 Beavercreek OH (Ohio) 45430 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
CAL Tech Process Management LLC CAL08U 6000 Webster Street Dayton OH (Ohio) 45414 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Cambridge Material Testing Ltd. CAM15C 1177, Franklin Blvd Cambridge ON (Ontario) N1R 7W4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Cambridge Material Testing Ltd. CAM15C 1177, Franklin Blvd Cambridge ON (Ontario) N1R 7W4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Cametoid Technologies Inc. CAM21U 150 Colonial Road Manchester CT (Connecticut) 06040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Cametoid Technologies Inc. CAM21U 150 Colonial Road Manchester CT (Connecticut) 06040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Cametoid Technologies Inc. CAM21U 150 Colonial Road Manchester CT (Connecticut) 06040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Cametoid Technologies Inc. CAM21U 150 Colonial Road Manchester CT (Connecticut) 06040 USA PSR-0229 IVD Aluminum or SputteringCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-83488 Coating, Aluminum, High Purity
Cantwell Cullen and Company Inc. CAN02U 10 Artisans, Cr London ON (Ontario) Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Cantwell Cullen and Company Inc. CAN02U 10 Artisans, Cr London ON (Ontario) Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Canton Drop Forge Inc. CAN03U 4575, Southway Street, P.O. Box 6902 Canton OH (Ohio) 44706-0902 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Canton Drop Forge Inc. CAN03U 4575, Southway Street, P.O. Box 6902 Canton OH (Ohio) 44706-0902 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Canton Drop Forge Inc. CAN03U 4575, Southway Street, P.O. Box 6902 Canton OH (Ohio) 44706-0902 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Canada Forgings Inc (Can Forge) CAN04C 130, Hagar Street Welland ON (Ontario) L3B 5P8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Canada Forgings Inc (Can Forge) CAN04C 130, Hagar Street Welland ON (Ontario) L3B 5P8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Canadian Measurement Metrology Inc. CAN05U/CAN14C 2433, Meadowvale Blvd. Mississauga ON (Ontario) L5N 5S2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Canadian Measurement Metrology Inc. CAN05U/CAN14C 2433, Meadowvale Blvd. Mississauga ON (Ontario) L5N 5S2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
The Canadian Plastics Group CAN24C 265 Pony Drive Newmarket ON (Ontario) Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Carpenter Technology (Canada) Ltd CAR04U 6114, Edwards Mississauga ON (Ontario) L5T 2V7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content Deposit- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. - Limited to steel parts below 200ksi unless usage of this process has been specifically approved by engineering authority.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0175 Chromium Plating (Electrodeposited, Low Embrittlement)CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Plating, Chromium Hard Deposit Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed Deposit Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0175 Chromium Plating (Electrodeposited, Low Embrittlement)CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, Chromium Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to NDT personnel certification per ARP 1923 or training per PSR0310.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels- Conditional to approval of specific and detailled supplier procedure. - Specify method and type used.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, (Electrodeposited) - Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. - Limited to steel parts below 200ksi unless usage of this process has been specifically approved by engineering authority.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0231 Application of HVOF CoatingsCT-Coating A - Approval HPS-231 Applications of HVOFConditional to approval of specific and detailled supplier procedure. Conditional to
techniques approval.Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1500 Cadmium - Titanium Plating, Low Embrittlement, Electrodeposition
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0175 Chromium Plating (Electrodeposited, Low Embrittlement)CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 8 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement, Electrodepositon- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. - Limited to steel parts below 200ksi unless usage of this process has been specifically approved by engineering authority.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic Finishes- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129 for embrittling strippers. - Conditional to approval of stripping solutions and any subsequent change. - Specify PSR coating/plating which can be stripped.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0483 Superfinishing NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-483 Superfinishing
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0483 Superfinishing NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2452 Superfinishing of HVOF applied Tungsten Carbide Coatings
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR0215.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels Parts- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress Relief of Steel Parts - Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Ceel Limited (SouthWest) CEE01C 85, Stafford Drive Brampton ON (Ontario) L6W 1L3 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
CE Machine Company Inc. CEM01U 1741 S. Leonine Wichita KS (Kansas) 67213 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
Kellstrom Defense Aerospace Inc. (Certified Aircraft Parts) CER01U 3701 Flamingo Road Miramar FL (Florida) 33027 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
Kellstrom Defense Aerospace Inc. (Certified Aircraft Parts) CER01U 3701 Flamingo Road Miramar FL (Florida) 33027 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Kellstrom Defense Aerospace Inc. (Certified Aircraft Parts) CER01U 3701 Flamingo Road Miramar FL (Florida) 33027 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
CFN Precision CFN02C / CFN02U 1000, Creditstone Road Concord ON (Ontario) L4K 4P8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
CFN Precision CFN02C / CFN02U 1000, Creditstone Road Concord ON (Ontario) L4K 4P8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
CFN Precision CFN02C / CFN02U 1000, Creditstone Road Concord ON (Ontario) L4K 4P8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
CFN Precision CFN02C / CFN02U 1000, Creditstone Road Concord ON (Ontario) L4K 4P8 Canada PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted Bushings
CFN Precision CFN02C / CFN02U 1000, Creditstone Road Concord ON (Ontario) L4K 4P8 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
CFN Precision CFN02C / CFN02U 1000, Creditstone Road Concord ON (Ontario) L4K 4P8 Canada PSR-0212 Installation of Lube Fitting NONE A - Approval HPS-212 Installation of Lube Fitting
chem. Processing CHE06U 3910 Linden Oacks Dr. Rockford IL (Illinois) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
chem. Processing CHE06U 3910 Linden Oacks Dr. Rockford IL (Illinois) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
chem. Processing CHE06U 3910 Linden Oacks Dr. Rockford IL (Illinois) USA PSR-0012 Manganese phosphate on Steel H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc Base- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Specify heavy and/or light zinc phosphate is used.China Erzhoong Deyang Wanhang Die Forging Company CHI05U 460 W.Zhujiang Road Deyang City China China PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating cadmium- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steel parts below 200ksi unless usage of this process has been specifically
approved by engineering authority.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening Automatic Conditional to clean Shot Peen per PSR0187. For manual application, conditional to approval of specific and detailed supplier procedure.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to Techniques approval and acceptance of barkhausen noise inspection P/N for
First Production Batch
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451 Plating, Brush, General Requirements- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451/4 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating Chromium Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to pyrometry per PSR-0215.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress Relief of Steel Parts Conditional to pyrometry per PSR-0215. limited to stress relief only.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to pyrometry per PSR-0215.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel, Raw MaterialsConditional to pyrometry per PSR-0215. limited to stress relief only.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320, Class 2 Chromium Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, (Electrodeposited)
- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steel parts below 200ksi unless usage of this process has been specifically
approved by engineering authority.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0010 Quality Assurance Systems and Related Systems H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR-0310. Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-110 Sulfuric Acid Anodizing of Aluminum AlloysConditional to techniques approval
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-118 Temper Etch Inspection Conditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-126 Shot Peening of Metal PartsConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-129 Stress Relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR0215. Conditional to usage with ams2759/9 and/or
AMS2759/11
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-135 Cadmium Plating Low Embrittlement- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steel parts below 200ksi unless usage of this process has been specifically
approved by engineering authority.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-170 General Requirements for painting
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-171 Stripping of Inorganic Coating Conditional to approval of stripping solutions and any subsequent change. Specify PSR coating/plating which can be stripped.
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0173 Cleaning CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-173 Cleaning
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-175 Chromium Plating (Electrodeposited, Low EmbrittlementConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-180 Brush Plating Electrodeposition- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-182 Grinding of High Strength Steels and of Chrome plate (180,000 PSI and over)Conditional to Techniques approval and acceptance of barkhausen noise inspection P/N for
First Production BatchChrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0187 Acid Cleaning of Aluminum and Aluminum Alloys after Shot PeeningCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-187 Acid Cleaning of Aluminium and Aluminium Alloys after Shot PeeningConditional to approval of specific and detailled supplier procedure.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-202 Solid Film Lubricant Application
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0206 Abrasive Blasting CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-206 Abrasive BlastingLimited to aluminum oxide and subject technique approved by HD. Aluminum oxyde grit 120
need to be used.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-211 Application of Wet Wipe Primer
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-306 Pre-penetrant etch of low alloys steelspre-penetrant etch prior to penetrant inspection; pre-penetrant etch of low alloy steels; of
corrosion resistant steels; of aluminum alloys; of titanium alloysChrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0483 Superfinishing None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-483 Superfinishing
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type II Anodic Coatings for aAluminum and Aluminum AlloysConditional to techniques approval.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875 Heat Treatment of Steel Raw Materials Conditional to pyrometry per PSR-0215. limited to stress relief only.Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129Chrome Plus International Inc. CHR03U 3939 West 29th St. S. Wichita KS (Kansas) USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.Cincinnati Precision Instruments Inc. CIN09U 253 Circle Freeway Drive Cincinnati OH (Ohio) 45246 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Cincinnati Precision Instruments Inc. CIN09U 253 Circle Freeway Drive Cincinnati OH (Ohio) 45246 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Circor Aerospace CIR01U 2301 Wardlow Circle Corona CA (California) 92880-2881 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Circor Aerospace CIR01U 2301 Wardlow Circle Corona CA (California) 92880-2881 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Cleeve Technology Inc CLE02C / CLE03U 716 Colonel Sam Drive Oshawa ON (Ontario) L1H 7Y2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Cleeve Technology Inc CLE02C / CLE03U 716 Colonel Sam Drive Oshawa ON (Ontario) L1H 7Y2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Cleeve Technology Inc CLE02C / CLE03U 716 Colonel Sam Drive Oshawa ON (Ontario) L1H 7Y2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-011 Quality Assurance Requirements for Suppliers
Click Bond Inc. CLI02U 2151 Lockheed Way Carson City NV (Nevada) 89706 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Click Bond Inc. CLI02U 2151 Lockheed Way Carson City NV (Nevada) 89706 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
CMC Electronique Inc. CMC01C 600, boul. Frederick-Phillips; Saint-LaurentSaint-Laurent (Montreal) QC (Quebec) H4M 2S9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 9 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
CMC Électronique Inc. CMC01C 600, boul. Frederick-Phillips; Saint-LaurentSaint-Laurent (Montreal) QC (Quebec) H4M 2S9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
CM Manufacturing Inc. CMM01U 6333, Butler Creek Road Missoula MT (Montana) 59802 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
CM Manufacturing Inc. CMM01U 6333, Butler Creek Road Missoula MT (Montana) 59802 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
CM Manufacturing Inc. CMM01U 6333, Butler Creek Road Missoula MT (Montana) 59802 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Code Source COD06U 4115 Mesa Dr. Denton TX (Texas) 76207 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Colinear Machine & Design COL08U 7 Wilson Dr. Sparta NJ (New Jersey) 07871 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Colinear Machine & Design COL08U 7 Wilson Dr. Sparta NJ (New Jersey) 07871 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Complete Comparator Calibration COM53C 14 Alexander Avenue Paris Ontario N3L 2V7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Complete Comparator Calibration COM53C 14 Alexander Avenue Paris Ontario N3L 2V7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the competence of testing and
Consolidated Industries Inc. CON01U 677 Mixville Road Cheshire CT (Connecticut) 06410-0280 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Consolidated Industries Inc. CON01U 677 Mixville Road Cheshire CT (Connecticut) 06410-0280 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Continental Forge CON04U 412, E. El Segundo Blvd Compton CA (California) 90222-2399 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Continental Forge CON04U 412, E. El Segundo Blvd Compton CA (California) 90222-2399 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Continental Forge CON04U 412, E. El Segundo Blvd Compton CA (California) 90222-2399 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Continental Forge CON04U 412, E. El Segundo Blvd Compton CA (California) 90222-2399 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Continental Forge CON04U 412, E. El Segundo Blvd Compton CA (California) 90222-2399 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Continental Forge CON04U 412, E. El Segundo Blvd Compton CA (California) 90222-2399 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Continental Forge CON04U 412, E. El Segundo Blvd Compton CA (California) 90222-2399 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Continental Forge CON04U 412, E. El Segundo Blvd Compton CA (California) 90222-2399 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0215 Pyrometry HT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0122 Stabilization Cold, for Corrosion Resistant and Steel PartsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements- Conditional to usage with AMS 2759/5. - Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0122 Stabilization Cold, for Corrosion Resistant and Steel PartsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel Parts- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0268 Carburizing HT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/7 Gas and Vacuum Carburizing and Heat Treatment of Carburizing Grade Steel PartsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0268 Carburizing HT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2762 Heat Treatment of Parts in VacuumConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0122 Stabilization Cold, for Corrosion Resistant and Steel PartsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel, Raw Materials- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS B Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0307 Hardness Inspection MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E10 Standard Test Method for Brinell Hardness of Metallic Materials
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0307 Hardness Inspection MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods for Rockwell Hardness & Rockwell Superficial Hardness of Metallic Materials
Continental Heat Treating Inc. CON62U 10643 S.Norwalk blvd Santa Fe Springs CA (California) 90670 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
PRC-DeSoto International [now PPG Aerospace (formerly Courtaulds Aerospace)]COU01C 5676, Timberlea Blvd. Mississauga ON (Ontario) L4W 4M6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
PRC-DeSoto International [now PPG Aerospace (formerly Courtaulds Aerospace)]COU01C 5676, Timberlea Blvd. Mississauga ON (Ontario) L4W 4M6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
C.P.S. Industries Inc. CPS01C 30, Chemin de l'aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5M6 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 Grinding
C.P.S. Industries Inc. CPS01C 30, Chemin de l'aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5M6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
C.P.S. Industries Inc. CPS01C 30, Chemin de l'aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5M6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
C.P.S. Industries Inc. CPS01C 30, Chemin de l'aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5M6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design
C.P.S. Industries Inc. CPS01C 30, Chemin de l'aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5M6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
C.P.S. Industries Inc. CPS01C 30, Chemin de l'aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5M6 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional Approval HPS-182 Grinding of High Strength Steels and of Chrome plate (180,000 PSI and over)Conditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
C.P.S. Industries Inc. CPS01C 30, Chemin de l'aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5M6 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional Approval MIL-STD-806 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or OverConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 Grinding of High Strength Steels and of Chrome plate (180,000 PSI and over)Conditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Limitation: Base metal only
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed Deposit
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval AMS-2430 Shot Peening Automatic Conditional to process AuditPraxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel Parts
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for Parts
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2469 Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance Requirements
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed Coating
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2473 Chemical Film Treatment for Aluminum Alloys General Purpose Coating
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2474 Chemical Treatment for Aluminum Alloys Low Electrical Resistance Coating
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0122 Stabilization Cold, for Corrosion Resistant and Steel PartsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0122 Stabilization Cold, for Corrosion Resistant and Steel PartsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Heat Treatment Martensitic Corrosion-Resistant Steel Parts
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0122 Stabilization Cold, for Corrosion Resistant and Steel PartsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Heat Treatment Martensitic Corrosion-Resistant Steel Parts
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-26074 (MIL-C-26074) Coatings, Electroless Nickel Requirements for
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290, Class 2 Nickel Plating (Electrodeposited)
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant Steels
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0107 Cadmium Plating (Electro-deposited){Bright Cadmium}CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium (Electrodeposited)
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 (MIL-S-13165) Shot Peening of Metal Parts
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant Testing
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle Testing
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing A - Approval HPS-102 Nickel Electro Plating
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodize
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing A - Approval HPS-111 Chromic Acid Anodizing of Aluminium Alloys
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113, Brush Chemical Film Treament for Aluminium Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing L - Limited Approval HPS-113, Immersion Chemical Film Treament for Aluminium AlloysLimited to Type I, Class 1A only.
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval HPS-118 Temper Etch Inspection
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal Parts
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT A - Approval HPS-129 Stress Relief and Hydrogen Embrittlement Relief
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-135 Cadmium Plating low embrittlement
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing A - Approval HPS-143 Hard Anodize of Aluminium alloys
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0187 Acid Cleaning of Aluminum and Aluminum Alloys after Shot PeeningCP-Chemical Processing A - Approval HPS-187 Acid Cleaning of Aluminium and Aluminium Alloys after Shot Peening
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type I Anodic Coatings for Aluminum and Aluminum Alloys
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type II Anodic Coatings for Aluminum and Aluminum Alloys
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 10 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type III Anodic Coatings for Aluminum and Aluminum Alloys
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-46168 Coating, Aliphatic Polyurethane, Chemical Agent Resistant
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-8514 Coating Compound, Metal Pretreatment
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0112 Manganese Phosphate on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc Base
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541) Brush, Class 1AChemical Conversion Coatings on Aluminum and Aluminum AlloysConditional to Annual Operator Qualification for Brush operation.Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541) Brush, Class 3Chemical Conversion Coatings on Aluminum and Aluminum AlloysConditional to Annual Operator Qualification for Brush operation.Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541) Immersion, Class 1AChemical Conversion Coatings on Aluminum and Aluminum Alloys
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-8937 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-81329 (MIL-L-81329) Lubricant, Solid Film, Extreme Environment, NATO Code Number S-1737
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and Weldments
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and Weldments
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 (MIL-I-6866) Inspection, Liquid Penetrant
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-Deposition
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection
Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0310 Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Praxair Surface Technologies (Formely CP Tech) CPT01C 2300, rue Cohen Saint-Laurent (Montreal) QC (Quebec) H4R 2N8 Canada PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekTT-C-490 Chemical Conversion Coatings and Pretreatments for Ferrous Surfaces
Crane Aerospace &Electronics - ELDEC CRA04U 10 rue de Lombardie. 69800 Saint- Priest France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Crane Aerospace &Electronics - ELDEC CRA04U 10 rue de Lombardie. 69800 Saint- Priest France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Crane Aerospace &Electronics - ELDEC CRA04U 10 rue de Lombardie. 69800 Saint- Priest France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-011 Quality Assurance Requirements for Suppliers with Design
Crissair Inc. CRI01U 28909 Avenue Williams Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Crissair Inc. CRI01U 28909 Avenue Williams Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Cromac CRO01C 80, Sommerlea Road Brampton ON (Ontario) LT6 4X3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Cromac CRO01C 80, Sommerlea Road Brampton ON (Ontario) LT6 4X3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Crouzet Automatismes CRO01O 2, rue du Docteur Henri Abel; BP 59 Valence - - France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Crouzet Automatismes CRO01O 2, rue du Docteur Henri Abel; BP 59 Valence - - France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilities
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2402 Plating, Zinc
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0104 Shot Peening of Metal Parts CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2403 Plating, Nickel General Purpose Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0105 Electroless Nickel CP-Chemical Processing L - Limited Approval AMS-2404 Electroless Nickel Plating Limited to Mid-Phos solution.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0175 Chromium Plating CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2406 Chromium Plating, Hard DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2408 Plating, Tin
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2409 Plating, Immersion Tin, for Aluminum Alloys
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2410 Plating, Siver Nickel Strike, High Bake
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2411 Plating, Silver for High Temperature Applications
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2412 Plating, Silver, Copper Strike, Low Bake
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2414 Lead Plating
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2415 Plating, Lead and Indium
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2416 Plating, Nickel-Cadmium Diffused
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0138 Alkaline Zinc-Nickel Plating, Low EmbrittlementCP-Chemical Processing A - Approval AMS-2417 Plating, Zinc-Nickel Alloy Types 1 and 2; grade B, on copper alloys, Stainless Steel Alloys and Steel Alloys substrates.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2418 Plating, Copper
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2419 Cadmium-Titanium Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2420 Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2422 Plating, Gold
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0104 Shot Peening of Metal Parts CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2423 Plating, Nickel, Hard Deposit Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2424 Plating, Nickel Low-Stressed DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2425 Plating, Gold for Thermal Control
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening, AutomaticConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2432 Shot Peening, Computer Monitored Conditional to clean shot peen per PSR0187.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Level 2. Limited to chrome plating inspection & Conditional to techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310.
Level 2. Conditional to techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0175 Chromium Plating CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2460 Plating, ChromiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2480 Phosphate Treatment Paint Base Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2481 Phosphate Treatment Antichafting Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2485 Coating, Black Oxide
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0114 Conversion Coatings on Titanium and Titanium AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2486 Conversion Coating of Titanium Alloys Fluoride-Phosphate TypeConditional to approval of specific and detailled supplier procedure.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0319 Structural Examination of Titanium Alloys Inspection ProcedureCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2643 Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to generic technique approval.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to generic technique approval.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing L - Limited Approval AMS-2700 Passivation of Corrosion Resistant SteelsConditional Approval. Limited to Method 1, type 8.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Class ±25°F, Type D.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment L - Limited Approval AMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per PSR-0215. Limited to Stress Relief at or Below 375°F, except
furnace Blue M#2 at or below 675°F and Hydrogen Embrittlement Relief only.
Conditional to usage with AMS2759/9 and/or AMS2759/11.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2759/11 Stress Relief of Steel PartsConditional to Pyrometry per PSR-0215. Limited to Stress Relief at or below 375°F, except
furnace Blue M#2 at or below 675°F.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to Pyrometry per PSR-0215.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0105 Electroless Nickel CP-Chemical Processing L - Limited Approval AMS-C-26074 Coatings, Electroless Nickel Requirements forLimited to Mid-Phos solution.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-P-81728 Plating, Tin Lead (Electrodeposited) [Superseded by SAE-AMS-P-81728]
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0175 Chromium Plating CP-Chemical Processing L - Limited Approval AMS-QQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and hydrogen embrittlement relief per PSR-0129.
Limited to steel parts below 200ksi unless usage of this process has been specifically
approved by engineering authority & Conditional to techniques approval for steel parts.
Class 2.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 11 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-QQ-N-290 Nickel Plating (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Class 2.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B339 Standard Specification for Pig Tin
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B488 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B545 Electrodeposited Coating Thickness by the Beta Back Scatter
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0174 Cleaning Methods for Aircrafts Landing Gear and ComponentsCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy SurfacesFor repair and overhaul process only.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B700 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Level 2. Limited to chrome plating inspection & Conditional to techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310.
Level 2. Conditional to techniques approval.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing L - Limited Approval HPS-102 Nickel Electro PlatingConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0105 Electroless Nickel CP-Chemical Processing L - Limited Approval HPS-105 Electroless Nickel Plating Limited to Mid-Phos solution.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing L - Limited Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Level 2. Limited to chrome plating inspection & Conditional to techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing L - Limited Approval HPS-117 Magnetic Particle InspectionConditional to NDT personnel certification per PSR-0310.
Level 2. Conditional to techniques approval.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval HPS-118 Temper Etch Inspection Conditional to generic technique approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement L - Limited Approval HPS-126 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment L - Limited Approval HPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR-0215. Limited to Stress Relief at or Below 375°F, except
furnace Blue M#2 at or below 675°F and Hydrogen Embrittlement Relief only.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing L - Limited Approval HPS-135 Cadmium Plating low embrittlementConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0173 Cleaning CP-Chemical Processing L - Limited Approval HPS-173 Cleaning of inorganic CoatingVapor degreasing with N-propyl bromide. Electrocleaning with Oakite 90 for PSR0102,
Electrocleaning with Enprep 214 for PSR0135.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0175 Chromium Plating CP-Chemical Processing L - Limited Approval HPS-175 Chromium Plating (electrodeposited Low Embritlement)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing L - Limited Approval HPS-202 Solid Film Lubricant Application With Everlube 620C product only.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0206 Abrasive Blasting CP-Chemical Processing L - Limited Approval HPS-206 Abrasive BlastingAluminum oxide, grit 100 and grit 180 for surface preparation & Glass bead for stripping of
PSR0135.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0215 Pyrometry HT-Heat Treatment A - Approval HPS-215 Pyrometry Class ±25°F, Type D.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-14550 Copper Plating (Electrodeposited)
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0105 Electroless Nickel CP-Chemical Processing L - Limited Approval MIL-C-26074 Requirements for Coatings, Electroless NickelLimited to Mid-Phos solution.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-46168 Coating, Aliphatic Polyurethane, Chemical Agent Resistant
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-8514 Coating Compound, Metal Pretreatment
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-13924 (MIL-C-13924) Coating, Oxide, Black, For Ferrous Metals
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-13924 (MIL-C-13924) Coating, Oxide, Black, For Ferrous Metals
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0112 Manganese Phosphate on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc BaseConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc BaseConditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53022 (MIL-P-53022) Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53030 (MIL-P-53030) Primer Coating, Epoxy, Water Based, Lead and Chromate Free
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysConditional to Annual Operator Qualification for Brush operation.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysConditional to Annual Operator Qualification for Brush operation.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-G-45204 Gold Plating, Electrodeposited
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Level 2. Limited to chrome plating inspection & Conditional to techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310.
Level 2. Conditional to techniques approval.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-13808 Lead Plating (Electrodeposited)
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-P-81728 Plating, Tin Lead (Electrodeposited) (SUPERSEDED by SAE-AMS-P-81728)
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738With Everlube 620C product only.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1500 Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition (Inactive for New Design)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0175 Chromium Plating CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0206 Abrasive Blasting CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-STD-1504 Abrasive Blasting Aluminum oxide, grit 100 and grit 180 for surface preparation.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Level 2. Limited to chrome plating inspection & Conditional to techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310.
Level 2. Conditional to techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310.
Level 2. Conditional to techniques approval.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 12 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-STD-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Level 2. Limited to chrome plating inspection & Conditional to techniques approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessA - Approval MIL-STD-866 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or OverConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to generic technique approval.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-STD-868 Nickel Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-T-10727 Tin Plating: Electrodeposited or Hot-Dipped, for Ferrous and Nonferrous Metals
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT: Level 2 and PT: Level 2.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0175 Chromium Plating CP-Chemical Processing L - Limited Approval QQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsQQ-N-290 Nickel Plating (Electrodeposition )Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Class 2.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing L - Limited Approval QQ-P-35 Passivation Conditional Approval. Limited to type VIII.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-Z-325 Zinc Coating, Electrodeposited
DCI Aerotech DCI01U 7515, Lyndon Detroit MI (Michigan) 48238 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekTT-C-490 Chemical Conversion Coatings and Pretreatments for Ferrous SurfacesConditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.DCM AERONAUTIQUE DCM01U 519 RUE PAPINEAU Boisbriand Quebec J7G 2B7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
DCM AERONAUTIQUE DCM01U 519 RUE PAPINEAU Boisbriand Quebec J7G 2B7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemL - Limited Approval HPS-010 Quality Assurance Requirements for SuppliersConditional approval to part number listed: 200-7031-101, 200-7031-102,200-6058-101
DCM AERONAUTIQUE DCM01U 519 RUE PAPINEAU Boisbriand Quebec J7G 2B7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System Requirements
Deane & Company DEA01C 190, avenue Oneida; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 1A8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Dearborn Precision Tubular (Hunting Dearborne) DEA01U 6, Dearborn Drive; PO Box 126 Fryeburg ME (Maine) 04037-0126 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Dearborn Inc. DEA02U 678 Front St. Berea OH (Ohio) 44017 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Deburex Aviation Inc. DEB01C 80, rue du Parc Industriel Lanoraie QC (Quebec) J0K 1E0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Deburex Aviation Inc. DEB01C 80, rue du Parc Industriel Lanoraie QC (Quebec) J0K 1E0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Deburex Aviation Inc. DEB01C 80, rue du Parc Industriel Lanoraie QC (Quebec) J0K 1E0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Delta Sales DEL03U 8171 Main Street Williamsville NY (New York) 14221 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Delta Sales DEL03U 8171 Main Street Williamsville NY (New York) 14221 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Derco Aerospace Inc. DER01U 8000 W. Tower Avenue Milwaukee WI (Wisconsin) 53223 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Derco Aerospace Inc. DER01U 8000 W. Tower Avenue Milwaukee WI (Wisconsin) 53223 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Derco Aerospace Inc. DER01U 8000 W. Tower Avenue Milwaukee WI (Wisconsin) 53223 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Chromium Plating, Hard DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Chromium Plating, Hard DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0138 Alkaline Zinc-Nickel Plating, Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2417 Plating, Zinc-Nickel Alloy Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0138 Alkaline Zinc-Nickel Plating, Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2417 Plating, Zinc-Nickel Alloy Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2419 Cadmium-Titanium PlatingConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2419 Cadmium-Titanium PlatingConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2438 Plating, Chromium Thin, Hard, Dense DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2438 Plating, Chromium Thin, Hard, Dense DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, ChromiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, ChromiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-26074 Coatings, Electroless Nickel Requirements forConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-26074 Coatings, Electroless Nickel Requirements forConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 13 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing A - Approval HPS-102 Nickel Electro PlatingConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0105 Electroless Nickel CP-Chemical Processing A - Approval HPS-105 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment A - Approval HPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to pyrometry per PSR-0215.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-135 Cadmium Plating low embrittlementConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-140 Cadmium - Titanium alloy plating Low EmbrittlementConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing A - Approval HPS-171 Stripping of Inorganic coatingsConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing A - Approval HPS-175 Chromium Plating (electrodeposited Low Embritlement)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0206 Abrasive Blasting CP-Chemical Processing A - Approval HPS-206 Abrasive Blasting Aluminum Oxyde need to be used per HPS-206.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-26074 Requirements for Coatings, Electroless NickelConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-26074 Requirements for Coatings, Electroless NickelConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-DepositionConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-DepositionConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-868 Nickel Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-868 Nickel Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290 Nickel Plating (Electrodeposition )Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290 Nickel Plating (Electrodeposition )Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Diamond Chrome Plating Inc. DIA01U 604, South Michigan Avenue, P.O.Box 557Howell MI (Michigan) 48843 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Dipsol of America Inc. DIP02U 34005, Schoolcraft Road Livonia MI (Michigan) 48150-1313 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0307 Heat Treatment of Martensitic Corrosion Resistant SteelsMTL H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAC-7101/5 Nadcap Audit Criteria for Materials Testing Laboratories - Hardness
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A262 Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0307 Heat Treatment of Martensitic Corrosion Resistant SteelsMTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E10 Standard Test Method for Brinell Hardness of Metallic Materials
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1077 Test Method for Estimating the Depth of Decarburization of Steel Specimens
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0307 Heat Treatment of Martensitic Corrosion Resistant SteelsMTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E110 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0307 Heat Treatment of Martensitic Corrosion Resistant SteelsMTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E23 Notched Bar Impact Testing of Metallic Materials
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0512 Adhesion Bend Testing (Metallic Coatings)MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E290 Bend Testing of Material for Ductility
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E3 Standard Practice for Preparation of Metallographic Specimens
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0504 Microhardness MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E384 Standard Test Method For Microindentation Hardness of Materials
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E45 Steel, Setermination the Inclusion Content of
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0527 Room Temperature Tensile MTL H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E8 Standard Test Methods of Tension Testing of Metallic Materials
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0530 Chemical Testing MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekChemical Testing Chemical Testing
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the competence of testing and
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0521 MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMechanical Testing Mechanical Testing
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 14 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMetallography Metallography
Dirats Laboratories DIR01U 41 Airport Rd, Westfield MA 01085 1085 USA PSR-0522 MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekTensile Specimen Testing Tensile Specimen Testing
Dishon Limited DIS02U/DIS10C 40 Citation Drive Vaughan ON (Ontario) L4K 2W9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Dishon Limited DIS02U/DIS10C 40 Citation Drive Vaughan ON (Ontario) L4K 2W9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
DLM DLM01C 13265, rue Huntington Pierrefonds QC (Quebec) H8Z 1G3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Donlee Precision DON01C 9, Fenmar Drive Toronto ON (Ontario) M9L 1L5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Donlee Precision DON01C 9, Fenmar Drive Toronto ON (Ontario) M9L 1L5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sargent Aerospace Airtomic DOV01U 129 Norte Guyamas Guyamas Mexico Sonora 85400 MX PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sargent Aerospace Airtomic DOV01U 129 Norte Guyamas Guyamas Mexico Sonora 85400 MX PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hypercoat-Downing Ltd. DOW01C 3750B, Laird Road, Unit 6 Mississauga ON (Ontario) L5L 0A6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
DOW Hydraulic Systems DOW03U 1835, Wright Street La Verne CA (California) 91750 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Drill O Max DRI03C 9851 Lausanne Terrebonne QC (Quebec) H1H 5A6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Duncan Industries DUN01U 12110, Clark Street Santa Fe Springs CA (California) 90670-3711 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
E2B Teknologies E2B01U 521, 5th Ave. Chardon OH (Ohio) 44024 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
E2B Teknologies E2B01U 521, 5th Ave. Chardon OH (Ohio) 44024 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Eaglemaster inc. EAG04U 15500 28th Ave. N. Plymouth MN (Minnesota) 55447 USA PSR-0206 Abrasive Blasting CP-Chemical Processing L - Limited Approval HPS-206 Abrasive Blasting Conditional approval on Alumiplate techniques for CH-53 program onlyEarle M. Jorgensen Co. EAR01U 601, Redna Terrace Cincinnati OH (Ohio) 45215 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Eaton Aerospace EAT02U 24 East Glenolden Ave. PA PA (Pennsylvania)19036 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Eaton Aerospace EAT02U 24 East Glenolden Ave. PA PA (Pennsylvania)19036 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Eaton Aerospace EAT02U 24 East Glenolden Ave. PA PA (Pennsylvania)19036 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
Eaton Corporation - Kentwood EAT03U 3675 Patterson Avenue SE Kentwood MI (Michigan) 49512 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilities
Eaton Corporation - Kentwood EAT03U 3675 Patterson Avenue SE Kentwood MI (Michigan) 49512 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilities
Eaton Corporation - Kentwood EAT03U 3675 Patterson Avenue SE Kentwood MI (Michigan) 49512 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilities
Eaton Aeroquip EAT05U 300, S. East Avenue Jackson MI (Michigan) 49203-1972 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Eaton Aeroquip EAT05U 300, S. East Avenue Jackson MI (Michigan) 49203-1972 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Eaton Corp. EAT06U 90 Clary Connector Eastanolle GA (Georgia) 30538 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Eaton Corp. EAT06U 90 Clary Connector Eastanolle GA (Georgia) 30538 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Eaton Corp. EAT06U 90 Clary Connector Eastanolle GA (Georgia) 30538 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-011 Quality Assurance Requirements for Suppliers with Design
Eaton Aerospace EAT08U Av. Santa Rosalia 9707 Parque Industrial Tijuana Mexico PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Eaton Aerospace EAT08U Av. Santa Rosalia 9707 Parque Industrial Tijuana Mexico PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
ECE Groupe Zodiac ECE01U 13 Rue Lafayette Besancon Cedex 25043 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
ECE Groupe Zodiac ECE01U 13 Rue Lafayette Besancon Cedex 25043 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design
ECE Groupe Zodiac ECE01U 13 Rue Lafayette Besancon Cedex 25043 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Elastoproxy ELA02C 4035 Rue Lavoisier Boisbriand QC (Quebec) J7H 1N1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Crane Aerospace & Electronics (formerly Eldec corporation) ELD01U 16700 13th avenue West Lynnwood WA (Washington)98037-8597 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Crane Aerospace & Electronics (formerly Eldec corporation) ELD01U 16700 13th avenue West Lynnwood WA (Washington)98037-8597 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Design Suppliers
Electro-Kut Inc. ELE03C 2105, rue Michelin Laval QC (Quebec) H7L 5B8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Electro-Kut Inc. ELE03C 2105, rue Michelin Laval QC (Quebec) H7L 5B8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Electro-Kut Inc. ELE03C 2105, rue Michelin Laval QC (Quebec) H7L 5B8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Electro-Kut Inc. ELE03C 2105, rue Michelin Laval QC (Quebec) H7L 5B8 Canada PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted Bushings
Electro-Kut Inc. ELE03C 2105, rue Michelin Laval QC (Quebec) H7L 5B8 Canada PSR-0212 Installation of Lube Fitting NONE A - Approval HPS-212 Installation of Lube Fitting
Electro-Kut Inc. ELE03C 2105, rue Michelin Laval QC (Quebec) H7L 5B8 Canada PSR-0211 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Element Materials Technology Antwerpen ELE04U 2600 Berchem, Antwerp, Belgium Antwerp Belgium PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesA - Approval ASTM-E8 Standard Test Methods of Tension Testing of Metallic Materials
Element Materials Technology Antwerpen ELE04U 2600 Berchem, Antwerp, Belgium Antwerp Belgium PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Element Materials Technology Antwerpen ELE04U 2600 Berchem, Antwerp, Belgium Antwerp Belgium PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-17025 General requirements for the competence of testing and calibration laboratories
Electron Beam Industries Inc. ELE15U 961 Via Rodeo Placentia CA (California) 92870 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Elimetal Inc. ELI01C 1515, Boul. Pitfield Montreal QC (Quebec) H4S 1G3 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 Grinding of High Strength Steels and of Chrome plate (180,000 PSI and over)
Elimetal Inc. ELI01C 1515, Boul. Pitfield Montreal QC (Quebec) H4S 1G3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Elimetal Inc. ELI01C 1515, Boul. Pitfield Montreal QC (Quebec) H4S 1G3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Elimetal Inc. ELI01C 1515, Boul. Pitfield Montreal QC (Quebec) H4S 1G3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Elimetal Inc. ELI01C 1515, Boul. Pitfield Montreal QC (Quebec) H4S 1G3 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessA - Approval HPS-182 Grinding of High Strength Steels and of Chrome plate (180,000 PSI and over)Conditional to Techniques approval and acceptance of Barkhausen Noise Inspection by P/N
for first production batchEllwood Texas Forge ELL04U 10908 County Road 419 Navasota TX (Texas) 77868-1030 USA PSR-0711 Forging, Low Alloy Steel None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2375 Control of Forgings Requiring First Article Approval
Ellwood Texas Forge ELL04U 10908 County Road 419 Navasota TX (Texas) 77868-1030 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw Materials
Ellwood Texas Forge ELL04U 10908 County Road 419 Navasota TX (Texas) 77868-1030 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Ellwood Texas Forge ELL04U 10908 County Road 419 Navasota TX (Texas) 77868-1030 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle Testing
Ellwood Texas Forge ELL04U 10908 County Road 419 Navasota TX (Texas) 77868-1030 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ellwood Texas Forge ELL04U 10908 County Road 419 Navasota TX (Texas) 77868-1030 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General requirements for Forgings and Castings
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2403 Plating, Nickel General PurposeConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2405 Electroless Nickel Plating Low PhosphorusConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Chromium Plating, Hard DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2408 Plating, Tin
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2409 Plating, Immersion Tin, for Aluminum Alloys
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2410 Plating, Siver Nickel Strike, High Bake
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2411 Plating, Silver for High Temperature Applications
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2412 Plating, Silver, Copper Strike, Low Bake
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2416 Plating, Nickel-Cadmium Diffused
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0138 Alkaline Zinc-Nickel Plating, Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2417 Plating, Zinc-Nickel Alloy Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2418 Plating, Copper
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2419 Cadmium-Titanium PlatingConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2433 Plating, Nickel-Thallium-Boron or Nickel-Boron Electroless DepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2438 Plating, Chromium Thin, Hard, Dense DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451/4 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen EmbrittlementConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451/5 Plating, Brush, Chromium Hard Deposit, TrivalentConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, ChromiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2468 Hard Coating - AluminumConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2469 Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance RequirementsConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 15 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2472 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Dyed CoatingConditional to techniques approval.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2473 Chemical Film Treatment for Aluminum Alloys General Purpose CoatingLimited to type I, class 1A only, by immersion only.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2474 Chemical Treatment for Aluminum Alloys Low Electrical Resistance CoatingLimited to type I, class 1A only, by immersion only.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2480 Phosphate Treatment Paint Base Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2480 Phosphate Treatment Paint Base Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2481 Phosphate Treatment Antichafting Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2482 Hard Coating Treatment of Aluminum Alloys Teflon-Impregnated or CodepositedConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2485 Coating, Black Oxide
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0115 Anodic Treatment of Titanium and Titanium AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2488 Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or HigherConditional to approval of specific and detailled supplier procedure.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0319 Structural Examination of Titanium Alloys Inspection ProcedureCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2642 Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0319 Structural Examination of Titanium Alloys Inspection ProcedureCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2643 Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to generic technique approval.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment C - Conditional Approval AMS-2759/11 Stress Relief of Steel Parts Conditional to pyrometry per PSR-0215.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-26074 Coatings, Electroless Nickel Requirements forConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B339 Standard Specification for Pig Tin
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B545 Electrodeposited Coating Thickness by the Beta Back ScatterTin PlatingEmbee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B700 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B733 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on MetalConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-63576 Aluminum Oxide Coatings, Lubricative, for Aluminum and Aluminum Alloys
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-14550 Copper Plating (Electrodeposited)
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-26074 Requirements for Coatings, Electroless NickelConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-46168 Coating, Aliphatic Polyurethane, Chemical Agent Resistant
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-83286 Coating, Urethane, Aliphatic Isocyanate, for Aerospace Applications
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-8514 Coating Compound, Metal Pretreatment
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0112 Manganese Phosphate on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc BaseConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53022 (MIL-P-53022) Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53030 (MIL-P-53030) Primer Coating, Epoxy, Water Based, Lead and Chromate Free
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0229 IVD Aluminum or SputteringCP-Chemical Processing A - Approval MIL-DTL-83488 Coating, Aluminum, High PurityConditional to techniques approval for TY I & TY II of Ion Vapor Deposited aluminum. Limited
to Ion Vapor Deposited (IVD) aluminum.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-495 Finish, Chemical, Black, for Copper Alloys
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-7179 Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO code Number S-749
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46147 Lubricant, Solid Film, Air Cured, Corrosion Inhibiting
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-8937 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-P-18317 Plating, Black Nickel (Electrodeposited) on Brass, Bronze, or SteelConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-P-27418 Plating, Soft Nickel (Electrodeposited, Sulfamate bath)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-P-47226 Plating, Copper, Electroless (For Non-Conducting Material)
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-81329 (MIL-L-81329) Lubricant, Solid Film, Extreme Environment, NATO Code Number S-1737
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1500 Cadmium-Titanium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 16 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-DepositionConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to generic technique approval.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-868 Nickel Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-T-10727 Tin Plating: Electrodeposited or Hot-Dipped, for Ferrous and Nonferrous Metals
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290 Nickel Plating (Electrodeposition )Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-S-365 General Requirements for Silver Plating Electrodeposited
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekTT-C-490 Chemical Conversion Coatings and Pretreatments for Ferrous SurfacesConditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0129 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekTT-C-490 Chemical Conversion Coatings and Pretreatments for Ferrous SurfacesConditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional approval AMS-2453 Low Stress Grinding of Steel Parts Heat Treated to 180 KSI or over, and Low Stress Grinding of Chrome Plating applied to Steel Parts Heat Treated to 180 KSI or over
Embee EMB05U 2136, South Hathaway Street Santa Ana CA (California) 92705 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing C - Conditional approval HPS-170 General Requirements for Painting
EM Coatings EMC01U 1 John Downey Dr. New Britain CT (Connecticut) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
EM Coatings EMC01U 1 John Downey Dr. New Britain CT (Connecticut) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Empire Buff Cie Ltée EMP01C 1485, boul. St-Elzéar Ouest Laval QC (Quebec) H7L 3N6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
ES3 ENG08U Building E4, Section 4A, Freeport West Clearfield UT (Utah) 84016 USA PSR-0231 Application of HVOF CoatingsCT-Coating C - Conditional Approval AMS-2448 Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel Process-6 months conditional approval granted on expectation that ES3 will obtain Nadcap
accreditation within that time.ES3 ENG08U Building E4, Section 4A, Freeport West Clearfield UT (Utah) 84016 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
ES3 ENG08U Building E4, Section 4A, Freeport West Clearfield UT (Utah) 84016 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
ES3 ENG08U Building E4, Section 4A, Freeport West Clearfield UT (Utah) 84016 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
ES3 ENG08U Building E4, Section 4A, Freeport West Clearfield UT (Utah) 84016 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
Enthone Inc. (Western Union Business sol.) ENT32C 350 Frontage Road West Haven CT (Connecticut) 06515 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
E.T.M. Industries Inc. ETM01C 310, Hall Avenue E. Renfrew ON (Ontario) K7V 4E7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
E.T.M. Industries Inc. ETM01C 310, Hall Avenue E. Renfrew ON (Ontario) K7V 4E7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts- Conditional to Pyrometry per AMS2750.- Conditional to techniques approval for parts above
180ksi.- Specify atmosphere used.- Conditional to Operator qualification per ARP1962 for
raightening operations.
Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0122 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for SuppliersConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0122 Heat Treatment of Martensitic Corrosion Resistant Steels H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-6875
Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)
Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and Higher
Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class B Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, Class B Heat Treatment of Steel, Process forConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0307 MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods to Rockwell Hardness of Metallic
Exactatherm EXA04C 2381, Anson Drive Mississauga ON (Ontario) L5S 1G1 Canada PSR-0504 MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E384 Standard Test Methods for Microidentation Hardness of
Fastener Tool and Supply Inc. FAS01U 30350 Bruce Industrial Pkwy Sodon OH (Ohio) 44139 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Faxon Machining FAX01U 11101 Adwood Dr. Cincinnati OH (Ohio) 45240 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Faxon Machining FAX01U 11101 Adwood Dr. Cincinnati OH (Ohio) 45240 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Faxon Machining FAX01U 11101 Adwood Dr. Cincinnati OH (Ohio) 45240 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Final Finish FIN03U 596, E Highland Rd Macedonia OH (Ohio) 44056 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Finishers Inc. FIN06U 1718 Commerce Dr. Piqua Ohio 45356 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Firth Rixson Forgings Ltd - River Don FIR04U Milford Street Sheffield South YorkshoreS9 2LD UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Firth Rixson Forgings Ltd - River Don FIR04U Milford Street Sheffield South YorkshoreS9 2LD UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Fischer Technology Inc. FIS01U 750 Marshall Phelps Rd Windsor CT (Connecticut) 06095 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Fischer Technology Inc. FIS01U 750 Marshall Phelps Rd Windsor CT (Connecticut) 06095 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the competence of testing and
Foorest City Packaging FOR02U 3607 w 56ST. Cleveland OH (Ohio) 44102 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Fountain Plating Co. FOU01U 492 Prospect Avenue West Springfield MA (Massachusetts)01089-4596 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Fountain Plating Co. Inc. FOU01U 492, Prospect Avenue West Springfield MA (Massachusetts)01089-1804 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Fratelli Angelini Sud SRL FRA01U Corso Salvatore D'Amato 69 Arzano Napoli (NA) [Campania]80022 Italy PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating Chromium
Fratelli Angelini Sud SRL FRA01U Corso Salvatore D'Amato 69 Arzano Napoli (NA) [Campania]80022 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Fratelli Angelini Sud SRL FRA01U Corso Salvatore D'Amato 69 Arzano Napoli (NA) [Campania]80022 Italy PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, Electrodeposition
Fratelli Angelini Sud SRL FRA01U Corso Salvatore D'Amato 69 Arzano Napoli (NA) [Campania]80022 Italy PSR-0105 Electroless Nickel CP-Chemical Processing C - Conditional Approval AMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129Frazier Aviation FRA02U 445N Fox Street San Fernando, CA (California) 91340 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Frank J Cox Sales Ltd (formerly Canadian Central Gauge Laboratory) FRA04C 40, West Drive Brampton ON (Ontario) L6T 3T6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Fredon Corporation FRE01U PO BOX 600 Mentor OH (Ohio) 44061-0600 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Fredon Corporation FRE01U PO BOX 600 Mentor OH (Ohio) 44061-0600 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Friend Metals Co Inc. FRI01U 1160, North Cosby Way Anaheim CA (California) 92806 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Friend Metals Co Inc. FRI01U 1160, North Cosby Way Anaheim CA (California) 92806 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Friend Metals Co Inc. FRI01U 1160, North Cosby Way Anaheim CA (California) 92806 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Saint-Gobain Performance Plastics (Furon Company) FUR01U 386 METACOM AVE Bristol Rhode Island NY (New York) 02809 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Saint-Gobain Performance Plastics (Furon Company) FUR01U 386 METACOM AVE Bristol Rhode Island NY (New York) 02809 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilityscd for 200-2516, 200-3556, 200-3599G&N Rubicon Gear dba as Rubicon Gear G&N01U 225 Citation Circle Corona CA (California) 92880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
G&N Rubicon Gear dba as Rubicon Gear G&N01U 225 Citation Circle Corona CA (California) 92880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
G&N Rubicon Gear dba as Rubicon Gear G&N01U 225 Citation Circle Corona CA (California) 92880 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or OverConditional to Techniques approval and acceptance of Barkhausen Noise Inspection by P/N
for First Production Batch. Conditional to SDR approval for each grinding technique
G&N Rubicon Gear dba as Rubicon Gear G&N01U 225 Citation Circle Corona CA (California) 92880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment ofr Aluminum Alloys Sulfuric Acid ProcessConditional to techniques approvalGalvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2472 Anodic Treatment for Aluminum Alloys Sulfuric Acid ProcessConditional to techniques approval
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2473 Chemil Film Treatment for Aluminum Alloys General Purpose Conditional to Annual Operator Qualification for Brush Operation. Specify method used
(immersion and/or brush) and type used(I:with Cr6+, II: without Cr6+)
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to pyrometry per PSR-0215. Conditional to usage with AMS 2759/9 and AMS-
2759/11.Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to pyrometry per PSR-0215.Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 17 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodizing of Aluminum AlloysConditional to techniques approval
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113, Brush Chemical Film Treament for Aluminium AlloysConditional to Annual Operator Qualification for Brush Operation. Specify method used
(immersion and/or brush) and type used(I:with Cr6+, II: without Cr6+)
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113, Immersion Chemical Film Treament for Aluminium AlloysConditional to Annual Operator Qualification for Brush Operation. Specify method used
(immersion and/or brush) and type used(I:with Cr6+, II: without Cr6+)
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to pyrometry per PSR-0215.Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0173 Cleaning CP-Chemical Processing A - Approval HPS-173 Cleaning of inorganic Coating
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-C-320, Class 2 Chromium Plating (Electrodeposited) (Superseded by AMS-QQ-Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Galvair SRL GAL03U Via Edison 10 Barberino Di Mugello Florence (FI) [Tuscany]50031 Italy PSR-0102 Nickel Electro Plating CP-Chemical Processing C - Conditional Approval QQ-N-290, Class 2 Nickel Plating (Electrodeposition ) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.SAF Industries, LLC (dba Gar-Kenyon Technlogies) GAR01U 238, Water Street Naugatuck CT (Connecticut) 06770-0559 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
SAF Industries, LLC (dba Gar-Kenyon Technlogies) GAR01U 238, Water Street Naugatuck CT (Connecticut) 06770-0559 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2315 Determination of Delta Ferrite Content M - Metallography - GeneralGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-T-9046 Titanium & Titanium Alloy, Sheet, Strip & PlateM - Metallography - Alpha case: Wrought
Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A262 Detecting Susceptibility to Intergranular Attack in Austenitic Stainless SteelsM - Carbide Network; Practice A.
M - Metallography - Intergranular Attack; Practice A&E.
Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A370 Standard Test Methods and Definitions for Mechanical Testing of Steel ProductsM - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B487 Measuring Metal and Oxide Coating Thickness by Microscopic Examination of Cross SectionM - Metallograpy - Measurement of Metal and Oxide Coating Thickness by Microscopial
Examination of a Cross SectionGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum - and Magnesium Alloy ProductsM - Room temperature TensileGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0504 Microhardness MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B578 Standard Test Method for Microhardness of Electroplated CoatingsM - MicrohardnessGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada NONE - MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by various combustion and Fusion TechniquesCH-Elemental Analysis (Combustion or Fusion) - Carbon/Nitrogen/Oxygen/SulfurGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1077 Test Method for Estimating the Depth of Decarburization of Steel SpecimensM - Carbide Network - DecarburizationGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E112 Standard Specification for Thermocouple ConnectorsM- Metallography - General/Grain Size/ Grain Size (Nickel Alloys)Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1181 Standard Test Methods for Characterizing Duplex Grain SizesM- Metallography - Grain Size
Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada NONE - MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1409 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titenium Alloys by the Inert Gas Fusion Technique.CH- Elemental Analysis (Combustion or Fusion) - Nitrogen/Oxygen
CH - Fusion Method for Oxygen in titaniumGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada NONE - MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1479 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers.CH- Atomic Emission Spectroscopy - Inductively Coupled Plasma (ICP)Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0307 Hardness Inspection MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods for Rockwell Hardness & Rockwell Superficial Hardness of Metallic MaterialsM- Hardness Testing - Rockwell HardnessGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E190 Standard Test Method for Guided Bend Test for Ductility of WeldsM- Guided Bend Test for Ductility of WeldsGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada NONE - MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1937 Standard Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the inert gas fusionCH- Elemental Analysis (Combustion or Fusion) - NitrogenGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada NONE - MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1941 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis.CH- Elemental Analysis (Combustion or Fusion)Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E23 Notched Bar Impact Testing of Metallic MaterialsM- Charpy ImpactGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0512 Adhesion Bend Testing (Metallic Coatings)MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E290 Bend Testing of Material for Ductility M- Bend Testing
Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E3 Standard Practice for Preparation of Metallographic SpecimensM- IGA and End Grain Pitting
M - Metallography - Alpha case/Decarburizartion/MacroetchingGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E340 Standard Test Method for Macroetching Metals and AlloysM- Metallography - Macroetching
Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0504 Microhardness MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E384 Standard Test Method for Microindentation Hardness of MaterialsM- Metallography - Decarburization/Effective Case Depth
M - Microhardness Testing Knoop/VickersGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E407 Standard Practice for Microetching Metals and AlloysM- Metallography - Alpha Case/MicroetchingGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E45 Standard Test Methods for Determining the Inclusion Content of SteelM- Metallography - General/Inclusion Rating/MicrocleanlinessGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E8 Tension Testing of Metallic Materials M- Room Temperature TensileGenitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0307 Hardness Inspection MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E92 Standard Test Methods for Vickers Hardness of Metallic MaterialsM- Hardness Testing - Vickers (Macro)Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0503 Metallography MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E930 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)M- Metallography - Grain Size/Grain Size (Nickel Alloys)Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada NONE - MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekSAE-J422 Microscopic Determination of Inclusions in SteelsM - Metallography - Microscopic Determination of Inclustions in Steels.Genitest GEN04C 3472, rue Frontenac Montreal QC (Quebec) H2K 3A5 Canada NONE - MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekSAE-J423 Methods of Measuring Case Depth M - Metallography - Measuring Case Depth
Triumph Gear Systems - Torongo ULC GEN07C 11, Fenmar Drive Weston (Toronto) ON (Ontario) M9L 1L5 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Triumph Gear Systems - Torongo ULC GEN07C 11, Fenmar Drive Weston (Toronto) ON (Ontario) M9L 1L5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Triumph Gear Systems - Torongo ULC GEN07C 11, Fenmar Drive Weston (Toronto) ON (Ontario) M9L 1L5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Triumph Gear Systems - Torongo ULC GEN07C 11, Fenmar Drive Weston (Toronto) ON (Ontario) M9L 1L5 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 GrindingLimited to grind gears only. Conditional to Techniques approval and, for low alloy steels heat
treated above 180ksi, when required, acceptance of Barkhausen Noise Inspection by P/N for
First Production Batch.General Metal Heat Treating GEN15U 941 Addison Road Cleveland OH (Ohio) 44103 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
GGB LLC GGB01U 700 MID Atlantic Parkway Thoroface NJ (New Jersey) 08086 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
GGB LLC GGB01U 700 MID Atlantic Parkway Thoroface NJ (New Jersey) 08086 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Global Calibration Services LLCOCS Technology, Inc. GLO05U 502 S. Lucile Street Seattle WA (Washington)98108 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Global Calibration Services LLCOCS Technology, Inc. GLO05U 502 S. Lucile Street Seattle WA (Washington)98108 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
GMAIR GMA01U 3705, N.W. 115th Avenue; Bay #3 Doral FL (Florida) 33178 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space
GMAIR GMA01U 3705, N.W. 115th Avenue; Bay #3 Doral FL (Florida) 33178 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Greene, Tweed & Co Inc. GRE01U 2075, Detwiler Road Kulpsville PA (Pennsylvania)19443-0305 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Greene, Tweed & Co Inc. GRE01U 2075, Detwiler Road Kulpsville PA (Pennsylvania)19443-0305 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design
Grover Gundrilling, LLC GRO04U 59 Industrial Dr., Orford ME (Maine) 4270 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
GRTT S.r.i. Traitement Termici GRT01U Via Maritima 5700 Pontinia LT 04014 Italy PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements
GRTT S.r.i. Traitement Termici GRT01U Via Maritima 5700 Pontinia LT 04014 Italy PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Strength 220 KSI (1517 Mpa) and Higher
GRTT S.r.i. Traitement Termici GRT01U Via Maritima 5700 Pontinia LT 04014 Italy PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steels Parts Minimum
GRTT S.r.i. Traitement Termici GRT01U Via Maritima 5700 Pontinia LT 04014 Italy PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel, Raw Materials- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
GRTT S.r.l. Traitement Termici GRT01U Via Maritima 5700 Pontinia LT 04014 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hadd-Co Inspection Lab HAD01U 2420 Amsler St Torrance CA (California) 90505 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval ASTM-E1417 Stard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR0310
Hadd-Co Inspection Lab HAD01U 2420 Amsler St Torrance CA (California) 90505 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval ASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hadd-Co Inspection Lab HAD01U 2420 Amsler St Torrance CA (California) 90505 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hadd-Co Inspection Lab HAD01U 2420 Amsler St Torrance CA (California) 90505 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR0310
Hadd-Co Inspection Lab HAD01U 2420 Amsler St Torrance CA (California) 90505 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hadd-Co Inspection Lab HAD01U 2420 Amsler St Torrance CA (California) 90505 USA PSR-0310 Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Haerterei VTN Witten GMBH HAE01U Ruesbergstrasse 75, Witten, Germany Witten Germany Germany PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT C - Conditional Approval AMS-2759/11 Stress Relief of Steel Parts Conditional to Pyrometry per PSR0215.
Haerterei VTN Witten GMBH HAE01U Ruesbergstrasse 75, Witten, Germany Witten Germany Germany PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and Higher- Conditional to Pyrometry per AMS2750. - Conditional to techniques approval for parts
above 180ksi. - Specify atmosphere used and quench media used. - Conditional to Operator
Limited to P/N: 200-4051-103 for Fokker (Vacuum HT/Gas Quench)
Haerterei VTN Witten GMBH HAE01U Ruesbergstrasse 75, Witten, Germany Witten Germany Germany PSR-0122 Stabilization Cold, for Corrosion Resistant and Steel PartsHT-Heat Treatment C - Conditional Approval AMS-H-6875 Heat Treatment of Steel Raw Materials- Conditional to Pyrometry per AMS 2750.- Conditional to Operator qualification per ARP1962
for straightening operations.- Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Haerterei VTN Witten GMBH HAE01U Ruesbergstrasse 75, Witten, Germany Witten Germany Germany PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hager Mfg. Inc. HAG01U 14610, Industry Circle La Mirada CA (California) 90638 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Hager Mfg. Inc. HAG01U 14610, Industry Circle La Mirada CA (California) 90638 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Harrington Tool & Die HAR04C 2555, boul. Matte Brossard QC (Quebec) J4Y 2H1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Badger Meter HED01U 4545 W. BROWN DEER RD. Milwaukee WI 53224 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Heiplex Inc. HEI01C 11350, 54th avenue Rivière-des-Prairies (Montréal)QC (Quebec) H1E 2J1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Heinz Engineering HEI04U 1345 WEST 166th Street; Gardena, CA (California) 90247 USA PSR-0010 Quality Assurance Systems and Related Systems H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Heinz Engineering HEI04U 1345 WEST 166th Street; Gardena, CA (California) 90247 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Helical Products Company Inc. HEL03U 901 West McCoy lane Santa Maria CA (California) 93456 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Helical Products Company Inc. HEL03U 901 West McCoy lane Santa Maria CA (California) 93456 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Helical Products Company Inc. HEL03U 901 West McCoy lane Santa Maria CA (California) 93456 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Henkel Canada Corp B9421 HEN01C 6200 Millcreek Drive Mississauga ON (Ontario) L5N 0B5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Henkel Canada Corp B9421 HEN01C 6200 Millcreek Drive Mississauga ON (Ontario) L5N 0B5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Hentzen Coating HEN07U 6937 West Mill Road Milwaukee WI (Wisconsin) 53218-1225 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Hentzen Coating HEN07U 6937 West Mill Road Milwaukee WI (Wisconsin) 53218-1225 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 18 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0122 Stabilization Cold, for Corrosion Resistant and Steel PartsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion-Resistant Steel Parts- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/7 Gas and Vacuum Carburizing and Heat Treatment of Carburizing Grade Steel Parts- Conditional to Pyrometry per AMS2750. - Conditional to Operator qualification per ARP1962 for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0254 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in Vacuum - Conditional to Pyrometry per AMS2750. - Conditional to techniques approval for parts above 180ksi. - Specify atmosphere used and quench media used. - Conditional to Operator qualification per ARP1962 for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0257 Heat Treatment of Beryllium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in Vacuum - Conditional to Pyrometry per AMS2750. - Conditional to Operator qualification per ARP1962 for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2770 Heat Treatment of Wrought Aluminum Alloy PartsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2771 Heat Treatment of Aluminum Alloy CastingsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2772 Heat Treatment of Aluminum Alloy Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2801 Heat Treatment of Titanium Alloy PartsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6088 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Steels; CL-A.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS B Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Stainless Steels; CL-B.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS C Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless Steels; CL-C.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS D Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless and PH Stainless Steels; CL-D.Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0257 Heat Treatment of Beryllium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-7199 Heat Treatment of Wrought Copper-Beryllium Alloys (Copper Alloys: C17000, C17200, C17300, C17500, C17510)- Conditional to Pyrometry per AMS2750. - Conditional to Operator qualification per ARP1962 for straightening operations.
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0307 Hardness Inspection MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E10 Standard Test Method for Brinell Hardness of Metallic Materials
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0307 Hardness Inspection MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E110 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E112 Estimating the Average Grain Size of Metals
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0307 Hardness Inspection MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E3 Standard Practice for Preparation of Metallographic Specimens
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E407 Standard Test Method for Microetching Metals and Alloys
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hercules HER02U 101-113, Classon Avenue Brooklyn NY (New York) 11205 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Cesa Aerospace HER14U 28906, Paseo John Lennon, 4, Madrid Espagne 2890 Getafe Espagne PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hess Aerospace & Defense LTD HES01C 801 William Road Hemmingford QC (Quebec) J0L 1H0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hexagon Metrology Inc. HEX02U 250 Circuit Drive North Kingstown RI (Rhode Island)02852 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hexagon Metrology Inc. HEX02U 250 Circuit Drive North Kingstown RI (Rhode Island)02852 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-17025 General requirements for the competence of testing and calibration laboratories
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing C - Conditional Approval AMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval AMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing C - Conditional Approval AMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0114 Conversion Coatings on Titanium and Titanium AlloysCP-Chemical Processing C - Conditional Approval AMS-2486 Conversion Coating of Titanium Alloys Fluoride-Phosphate TypeConditional to approval of specific and detailled supplier procedure.HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing C - Conditional Approval AMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment L - Limited Approval AMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to pyrometry per AMS2750. Conditional to techniques approval for parts above
180KSI. Conditional to Operator qualification per ARP1962 for straightening operations.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Limited to Type II (sulfuric acid anodizing).HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing C - Conditional Approval AMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing C - Conditional Approval AMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing C - Conditional Approval ASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing C - Conditional Approval ASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval ASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing C - Conditional Approval ASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing C - Conditional Approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing C - Conditional Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment C - Conditional Approval HPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to pyrometry per PSR-0215.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 19 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-135 Cadmium Plating low embrittlementConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing C - Conditional Approval HPS-171 Stripping of Inorganic coatingsConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing C - Conditional Approval HPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval HPS-202 Solid Film Lubricant Application
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0206 Abrasive Blasting CP-Chemical Processing C - Conditional Approval HPS-206 Abrasive Blasting Aluminum Oxyde need to be used per HPS-206.HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-216 Heat Treatment of Corrosion - Resistant Steel-Conditional to pyrometry per ASM2750. - Conditional to techniques approval for parts above 180 ksi. Specify atmosphere used. - Conditional to operator qualification per ARP 1962 for straightening operations.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Limited to Type II (sulfuric acid anodizing).HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing C - Conditional Approval MIL-C-46168 Coating, Aliphatic Polyurethane, Chemical Agent Resistant
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing C - Conditional Approval MIL-C-8514 Coating Compound, Metal Pretreatment
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing C - Conditional Approval MIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing C - Conditional Approval MIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval MIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing C - Conditional Approval MIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing C - Conditional Approval MIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing C - Conditional Approval MIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing C - Conditional Approval MIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing C - Conditional Approval MIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing C - Conditional Approval MIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing C - Conditional Approval MIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval MIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing C - Conditional Approval MIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing C - Conditional Approval MIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval MIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing C - Conditional Approval MIL-STD-867 Temper Etch Inspection Conditional to NDT personnel certification per ARP 1923 or training per PSR0310.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing L - Limited Approval MIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement relief per PSR0129. Limited to steel
parts below 200KSI unless usage of this process has been specifically approved by
Engineering authority.HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing C - Conditional Approval NAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing C - Conditional Approval QQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing C - Conditional Approval QQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
HI-Tech Metal Finishing / Mayday HIT01U 3100 Jim Christal Road Denton TX (Texas) 76207 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.Advanced Engineering Technologies HIT02U 915, Ray Avenue Croydon PA (Pennsylvania)19021 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Hitemco HIT04U 160 Sweet Hollow Rd Old Bethpage NY (New York) USA PSR-0231 Application of HVOF CoatingsCT-Coating H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2447 Coating, Thermal Spray High Velocity Oxygen/ Fuel ProcessConditional to approval of specific and detailed supplier procedure. Conditional to
Techniques approval
Hitemco HIT04U 160 Sweet Hollow Rd Old Bethpage NY (New York) USA PSR-0231 Application of HVOF CoatingsCT-Coating H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2448 Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel ProcessConditional to approval of specific and detailed supplier procedure. Conditional to
Techniques approval
Hitemco HIT04U 160 Sweet Hollow Rd Old Bethpage NY (New York) USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2449 Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength SteelsConditional to technique approval and acceptance of Barkhausen Noise Inspection by P/N:
for first production batchHitemco HIT04U 160 Sweet Hollow Rd Old Bethpage NY (New York) USA PSR-0483 Superfinishing None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2452 Superfinishing of HVOF applied Tungsten Carbide Coatings
Hitemco HIT04U 160 Sweet Hollow Rd Old Bethpage NY (New York) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and ServicingConditional to approval of specific and detailed supplier procedure. Conditional to
Techniques approval
Hitemco HIT04U 160 Sweet Hollow Rd Old Bethpage NY (New York) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - RequirementsConditional to approval of specific and detailed supplier procedure. Conditional to
Techniques approvalHixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, Cadmium Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2403 Plating, Nickel General Purpose Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2405 Electroless Nickel Plating Low PhosphorusConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2412 Plating, Silver, Copper Strike, Low Bake
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed Deposit Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2468 Hard Coating - AluminiumConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2469 Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance RequirementsConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2472 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Dyed CoatingConditional to techniques approval.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2473 Chemical Film Treatment for Aluminum Alloys General Purpose CoatingConditional to Annual Operator Qualification for Brush operation.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2474 Chemical Treatment for Aluminum Alloys Low Electrical Resistance CoatingConditional to Annual Operator Qualification for Brush operation.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsLimited to type 6 only.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType II.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I and IB.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-26074 Coatings, Electroless Nickel Requirements forConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA NONE - NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-27725 Coating, Corrosion Preventative, Polyurethane for Aircraft Integral Fuel Tanks for Use to 250 Degrees F (121 Degrees C)-FSC 8030
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0184 Cadmium Plating, Vacuum DepositCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-8837 Coating, Cadmium (Vacuum Deposited)Conditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, Electrodeposited Type I and II.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0505 Corrosion/Salt Spray TestingMTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B117 Standard Practice for Operating Salt Spray (Fog) ApparatusInternal Support OnlyHixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B733 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on MetalConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingLimited to type I. Level 2 & 3.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing L - Limited Approval HPS-106 Penetrant InspectionConditional Approval granted. A compliance audit is required for full approval. Conditional to
NDT personnel certification per PSR-0310. Conditional to use of an approved source for pre-
penetrant etching to HPS-306 (PSR-0106), when applicable.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing L - Limited Approval HPS-117 Magnetic Particle InspectionConditional Approval graned. A compliance audit is required for full approval. Conditional to
NDT personnel certification per PSR-0310.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType II.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I and IB.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-26074 Requirements for Coatings, Electroless NickelConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA NONE - NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-27725 Coating, Corrosion Preventive, for Aircraft Integral Fuel Tanks
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0184 Cadmium Plating, Vacuum DepositCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-8837 Coating, Cadmium (Vacuum Deposited)Conditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-13924 (MIL-C-13924) Coating, Oxide, Black, For Ferrous MetalsClass 1 and 4 only.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to Type I, Class 1A only.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to Class 1A. Immersion application only.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 20 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to Type I, Class 1A. Immersion application only.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing A - Approval NAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290 Nickel Plating (Electrodeposition) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited) Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.
Hixson Metal Finishing HIX01U 829, Production Place Newport Beach CA (California) 92663 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-S-365 General Requirements for Silver Plating ElectrodepositedLimited to Processes with approved SMPP (Supplier Material Processing Procedure). For RSS
hardware only. SMPP HPS 900, rev J, 6/28/97.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2402 Plating, Zinc
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2403 Plating, Nickel General PurposeConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2405 Electroless Nickel Plating Low PhosphorusConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Chromium Plating, Hard DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2408 Plating, Tin
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2409 Plating, Immersion Tin, for Aluminum Alloys
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2410 Plating, Siver Nickel Strike, High Bake
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2411 Plating, Silver for High Temperature Applications
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2412 Plating, Silver, Copper Strike, Low Bake
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2416 Plating, Nickel-Cadmium Diffused
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0138 Alkaline Zinc-Nickel Plating, Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2417 Plating, Zinc-Nickel Alloy Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2418 Plating, Copper
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2420 Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, ChromiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2469 Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance RequirementsConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2472 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Dyed CoatingConditional to techniques approval.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2473 Chemical Film Treatment for Aluminum Alloys General Purpose CoatingLimited to type I, class 1A only, by immersion only.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2475 Protective Treatments Magnesium Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2480 Phosphate Treatment Paint Base Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2481 Phosphate Treatment Antichafting Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2485 Coating, Black Oxide
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-26074 Coatings, Electroless Nickel Requirements forConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B545 Electrodeposited Coating Thickness by the Beta Back ScatterTin PlatingHohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B700 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-14550 Copper Plating (Electrodeposited)
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-26074 Requirements for Coatings, Electroless NickelConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-13924 (MIL-C-13924) Coating, Oxide, Black, For Ferrous Metals
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-13924 (MIL-C-13924) Coating, Oxide, Black, For Ferrous Metals
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0112 Manganese Phosphate on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc BaseConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-14072 Finishes for Ground Based Electronic Equipment
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO code Number S-749
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-M-3171 Magnesium Alloy, Processes For Pretreatment and Prevention of Corrosion On
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-M-7866 Molybdenum Disulfide, Technical, Lubrication Grade
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-81329 (MIL-L-81329) Lubricant, Solid Film, Extreme Environment, NATO Code Number S-1737
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-T-10727 Tin Plating: Electrodeposited or Hot-Dipped, for Ferrous and Nonferrous Metals
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290 Nickel Plating (Electrodeposition )Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-S-365 General Requirements for Silver Plating Electrodeposited
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 21 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Hohman Plating HOH01U 814, Hillrose Avenue Dayton OH (Ohio) 45404-1132 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-Z-325 Zinc Coating, Electrodeposited
Honeywell HON04U 375 N.Lake St.Boyne City MI (Michigan) 49712 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Honeywell HON04U 375 N.Lake St.Boyne City MI (Michigan) 49712 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Qualisy Assurance Requirements for Suppliers
Hydralogie Inc. HYD02C 4005, rue Lavoisier Boisbriand QC (Quebec) J7H 1N1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Hydromach inc. HYD08U 20400 Prairie Street Chatsworth CA (California) 91311 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
HYDREP HYD09U Aeroport de Dinard-Pleurfuit Batiment 20Saint-Malo Dinard 35801 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9110 Quality Maintenance Systems-Aerospace - Requirements
HYDREP HYD09U Aeroport de Dinard-Pleurfuit Batiment 20Saint-Malo Dinard 35801 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval AMS-2430 Shot Peening Automatic Automated peening only HD SQA is required to visit facility and look at process.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, ChromiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2469 Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance RequirementsConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0252 Heat Treatment HT-Heat Treatment A - Approval AMS-2759/11 Stress Relief of Steel Parts Conditional to Pyrometry per AMS2750. - Conditional to Techniques approved for parts above 180ksi. - Specify atmosphere used. - Conditinoal to operator qualification arp1982 for straighteninr operations.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-26074 Coatings, Electroless Nickel Requirements forConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-M-3171 Magnesium Alloy, Processes For Pretreatment and Prevention of Corrosion On
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B339 Standard Specification for Pig Tin
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0174 Cleaning Methods for Aircrafts Landing Gear and ComponentsCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy SurfacesFor repair and overhaul process only.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-170 General Requirements for Painting
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-63576 Aluminum Oxide Coatings, Lubricative, for Aluminum and Aluminum Alloys
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-26074 Requirements for Coatings, Electroless NickelConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0112 Manganese Phosphate on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc BaseConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53022 (MIL-P-53022) Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53030 (MIL-P-53030) Primer Coating, Epoxy, Water Based, Lead and Chromate Free
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-M-3171 Magnesium Alloy, Processes For Pretreatment and Prevention of Corrosion On
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1500 Cadmium-Titanium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-DepositionConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to generic technique approval.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 22 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-C-320 Chromium Plating (Electrodeposited)
Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Class 2.Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Hytek Finishes HYT01U 8127, South 216th Kent WA (Washington)98032-1996 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekTT-C-490 Chemical Conversion Coatings and Pretreatments for Ferrous SurfacesConditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Icore International Inc. ICO02U 3780 Flightline Drive, Santa Rosa CA (California) 95403 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Idenco Canada IDE03C 95 Rue J.-A.-Bombardier #1 Boucherville QC (Quebec) J4B 8P1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Markem-Imaje Inc. IMA02C 1856, rue Onésime-Gagnon Lachine QC (Quebec) H8T 3M6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Imaginetics LLC IMA06U 3410 A ST SE Arburn WA (Washington)98002 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Imaginetics LLC IMA06U 3410 A ST SE Arburn WA (Washington)98002 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Imaginetics LLC IMA06U 3410 A ST SE Arburn WA (Washington)98002 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Imaginetics LLC IMA06U 3410 A ST SE Arburn WA (Washington)98002 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Imaginetics LLC IMA06U 3410 A ST SE Arburn WA (Washington)98002 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR-0310. Imaginetics LLC IMA06U 3410 A ST SE Arburn WA (Washington)98002 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Imaginetics LLC IMA06U 3410 A ST SE Arburn WA (Washington)98002 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Indiana Precision Grinding IND31U 3101 Bertha Street Indianapolis IN (Indiana) 46222 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemT - Temporary Approval HPS-010 Quality Assurance Requirements for SuppliersSupplier is approved for One-Timer PO.IN-LHC Aircraft Systems INL02U Route de Jallans Châteaudun - 28200 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
IN-LHC Aircraft Systems INL02U Route de Jallans Châteaudun - 28200 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilities
IN-LHC Aircraft Systems INL02U Route de Jallans Châteaudun - 28200 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-14000 Environmental Management Systems
IN-LHC Aircraft Systems INL02U Route de Jallans Châteaudun - 28200 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Inspirnetics INS01U 9390, 7th St., Unit B Rancho Cucamonga CA (California) 91730 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Inspirnetics INS01U 9390, 7th St., Unit B Rancho Cucamonga CA (California) 91730 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC Supplier
General Dynamics Ordnance Tactical System INT04U 1200 North Glendbrook Dr. Garland TX (Texas) 75040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
General Dynamics Ordnance Tactical System INT04U 1200 North Glendbrook Dr. Garland TX (Texas) 75040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
General Dynamics Ordnance Tactical System INT04U 1200 North Glendbrook Dr. Garland TX (Texas) 75040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forgings and Castings
General Dynamics Ordnance Tactical System INT04U 1200 North Glendbrook Dr. Garland TX (Texas) 75040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Intertrade Logistics (Intertrade Aviation Corporation) INT06U 5722, Buckhingham Drive Huntington Beach CA (California) 92649-1130 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Intertrade Logistics (Intertrade Aviation Corporation) INT06U 5722, Buckhingham Drive Huntington Beach CA (California) 92649-1130 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Intertrade Logistics (Intertrade Aviation Corporation) INT06U 5722, Buckhingham Drive Huntington Beach CA (California) 92649-1130 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Integral Aerospace INT07U 2040 East Dyer Road Santa Ana CA (California) 92705 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
International Precision Inc. INT10U 9526, Vassar Avenue; PO Box 4839 Chatsworth CA (California) 91313-4839 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
International Precision Inc. INT10U 9526, Vassar Avenue; PO Box 4839 Chatsworth CA (California) 91313-4839 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
International Precision Inc. INT10U 9526, Vassar Avenue; PO Box 4839 Chatsworth CA (California) 91313-4839 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
International Precision Inc. INT10U 9526, Vassar Avenue; PO Box 4839 Chatsworth CA (California) 91313-4839 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC Supplier
Intertechnology, Inc. INT16C 19 Waterman Ave. Site 102 Toronto Ontario M4B 1Y2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Intertechnology, Inc. INT16C 19 Waterman Ave. Site 102 Toronto Ontario M4B 1Y2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Intempco Controls Inc. INT17C 880, ave Selkirk; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 3S3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Interface Welding INT21U 20722, Belshaw Avenue Carson CA (California) 90746 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Interface Welding INT21U 20722, Belshaw Avenue Carson CA (California) 90746 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Interface Welding INT21U 20722, Belshaw Avenue Carson CA (California) 90746 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Interface Welding INT21U 20722, Belshaw Avenue Carson CA (California) 90746 USA PSR-0434 Friction Welding WLD-Welding A - Approval MIL-STD-1252 Inertia Friction Welding Process, Procedure and Performance Qualification
Integrated Procurement Technologies INT31U 320 Storke Rd. Goleta CA (California) 93117 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9120 Quality Management Systems - Requirements for Aviation, Space
Integrated Procurement Technologies INT31U 320 Storke Rd. Goleta CA (California) 93117 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
ITM Instruments ITM01C 20800, boul. Industriel Ste-Anne-de-Bellevue QC (Quebec) H9X 0A0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Jamaica Bearing Co Inc. JAM01U 1700, Jericho Turnpike New Hyde Park NY (New York) 11040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
Jamaica Bearing Co Inc. JAM01U 1700, Jericho Turnpike New Hyde Park NY (New York) 11040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Jamaica Bearing Co Inc. JAM01U 1700, Jericho Turnpike New Hyde Park NY (New York) 11040 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Jamco Aerospace JAM02U 121, East Industry Ct. Deer Park NY (New York) 11729 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Jamco Aerospace JAM02U 121, East Industry Ct. Deer Park NY (New York) 11729 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Jamco Aerospace JAM02U 121, East Industry Ct. Deer Park NY (New York) 11729 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Jay-Em Aerospace JAY01U 75, Marc Drive Cuyahoga Falls OH (Ohio) 44223 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Jay-Em Aerospace JAY01U 75, Marc Drive Cuyahoga Falls OH (Ohio) 44223 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Jay-Em Aerospace JAY01U 75, Marc Drive Cuyahoga Falls OH (Ohio) 44223 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
JMD Étiquettes JMD01O 7, rue Henri-Dunant Bondoufle France 91070 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
JMD Étiquettes JMD01O 7, rue Henri-Dunant Bondoufle France 91070 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Johnson Gage Company JOH04U 534, Cottage Grove Road Bloomfield CT (Connecticut) 06002-3032 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0115 Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or HigherCP-Chemical Processing C - Conditional Approval AMS-2488 Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher Type IIHéroux Must be present during the first batch prior final approval
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per PSR-0215. Conditional to usage with AMS 2759/9 and/or
AMS2759/11.Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0269 Nitriding HT-Heat Treatment C - Conditional Approval AMS-2759/10 Automated Gaseous Nitriding by Nitriding PotentielConditional upon Nadcap AC7102/4 scope of approvalKale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress Relief of Steel Parts
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to Pyrometry per PSR-0215.Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant Testing
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval ASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-020 Digital Product Definition / Model Based DefinitionMust be followed-up with on-site review 20-11-2014
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodizing of Aluminium AlloysApproved for Class 2, Grade 2 only. Conditional to techniques approval. Conditional to
approval of specific and detailed supplier procedure.
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113 Chemical Film Treatment for Aluminium AlloysConditional to Annual Operator Qualification for Brush operation. Approved by Type 1, Class
1A with Alodine 1200S only.
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal PartsConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0143 Stripping of Inorganic CoatingCP-Chemical Processing A - Approval HPS-143 Hard Anodizing - AluminiumConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing A - Approval HPS-171 Stripping of Inorganic coatingsConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0187 Acid Cleaning of Aluminum and Aluminum Alloys after Shot PeeningCP-Chemical Processing A - Approval HPS-187 Acid Cleaning of Aluminium and Aluminium Alloys after Shot PeeningConditional to approval of specific and detailled supplier procedure.Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval HPS-202 Solid Film Lubricant Application
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted Bushings
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0213 Staking Procedure NONE A - Approval HPS-213 Staking Procedure
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment A - Approval HPS-216 Heat Treatment of Corrosion - Resistant SteelConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionAQS-Aerospace Quality SystemA - Approval HPS-306 Pre-Penetrant etch of aluminum alloys Conditional to approval of detailed supplier procedureKale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval MIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT Level 2 and 3Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E8 Standard Test Methods of Tension Testing of Metallic Materials
Kale Aero (Kale Havacilik Sanayi S.A.) KAL02U Derive Endustri Serbest Bolgesi 117/123 Aydinli-Tuzla Istanbul - 34295 Turkey PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts"- Conditional to Pyrometry per AMS2750.- Conditional to techniques approval for parts
above 180ksi.- Specify atmosphere used.- Conditional to Operator qualification per ARP1962
for straightening operations."Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 23 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Method 1 (Nitric) Only.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Method 1 (Nitric) Only.Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0270 Liner and Bearing NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-81820 Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed OscillationKamatics is on the QPL for both AS81820 and 81934.Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0270 Liner and Bearing NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-81934 Bearing, Sleeve, Plain, Self-Lubricating, -65 °F to 325 °FKamatics is on the QPL for both AS81820 and 81934.Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsNADCAP approved for Passivation Cert #124287-D exp 4/30/2011. Method 1 (Nitric) Only.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.
Method 1 (Nitric) Only.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing L - Limited Approval HPS-106 Penetrant Inspection
Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).*- The supplier deviation request for
HPS 106 section 8.2.3.1a has been accepted by the responsible level 3. Penetrant brightness
test can be done quarterly instead of monthly.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing L - Limited Approval HPS-113 Chemical Film Treament for Aluminium AlloysConditional to annual operator Certification for Brush operation. Limited to Type I, Class 1A
only, by Methods B (Brush) and C (Immersion) only.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle InspectionLimitation: We can not comply with the test block specimens cited in sections 8.4.3 and 8.4.4.
We perform system verification by using a different specimen.Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0187 Acid Cleaning of Aluminum and Aluminum Alloys after Shot PeeningCP-Chemical Processing A - Approval HPS-187 Acid Cleaning of Aluminium and Aluminium Alloys after Shot PeeningConditional to approval of specific and detailled supplier procedure.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless SteelConditional to approval of specific and detailled supplier procedure.
Method 1 (Nitric) Only.Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0214 Spherical bearing installation by roller SwageNONE A - Approval HPS-214 Spherical Bearing Installation by Roller SwageTT-P-1757A primer not used at Kamatics, would have to find a suitable substitute.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing L - Limited Approval HPS-306 Pre-penetrant EtchingLow alloy steels, Corrosion Resistant Steels, Aluminum alloys, Titanium alloys, Copper alloys,
Beryllium alloys and Magnesium alloys.Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - RequirementsCertificate Number FM41099, registrar: BSI, expiration date 29-Nov-2012.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysApplication: Brush, Method: With hex chrome.
Limited to type I, Class 1A only, by immersion only.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II. NDT personnel are certified to NAS.
Kamatics KAM01U 1330, Blue Hills Avenue Bloomfield CT (Connecticut) 06002-5303 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 PassivationConditional to approval of specific and detailled supplier procedure.
Method 1 (Nitric) Only.Kanawha Scales & Systems Inc. KAN03U 35 Haas Dr. Englewood OH (Ohio) 45322 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Kanawha Scales & Systems Inc. KAN03U 35 Haas Dr. Englewood OH (Ohio) 45322 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Kanawha Scales & Systems Inc. KAN03U 35 Haas Dr. Englewood OH (Ohio) 45322 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Kavlico Corporation KAV01U 14401 Princeton Avenue Moonpark CA (California) 93021-9738 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Kavlico Corporation KAV01U 14401 Princeton Avenue Moonpark CA (California) 93021-9738 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilities
Kavlico Corporation KAV01U 14401 Princeton Avenue Moonpark CA (California) 93021-9738 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Kirkhill- TA Company KIR01U 28065 Franklin Parkway Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Kit Pack Co, Inc. KIT05U 285 East Thorpe Road Las Cruces NM (New Mexico)88007 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Kollmorgen Corporation KOL01U 201 Rock Road Radford Virginia USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Steels; CL-A.
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI. Stainless and PH Stainless Steels; CL-D.
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Kropp forge KRO01U 5301, West Roosevelt Road Cicero IL (Illinois) 60804-1270 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Kurt Manufacturing KUR01U 5280 Main Street NE Minneapolis MN (Minnesota) 55421 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Kurt Manufacturing KUR01U 5280 Main Street NE Minneapolis MN (Minnesota) 55421 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Laboratoire Mat Inc. LAB03C 610, rue Adanac; bureau 300 Beauport QC (Quebec) G1C 7B7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Laboratoire Mat Inc. LAB03C 610, rue Adanac; bureau 300 Beauport QC (Quebec) G1C 7B7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
ATI Ladish Forging LAD02U 5481, S. Packard Ave. Cudahy WI (Wisconsin) 53110 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
ATI Ladish Forging LAD02U 5481, S. Packard Ave. Cudahy WI (Wisconsin) 53110 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
LATelec LAT01U 1076 Route du Muret 40410 Liposthey 40410 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
LATelec LAT01U 1076 Route du Muret 40410 Liposthey 40410 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
LATelec LAT01U 1076 Route du Muret 40410 Liposthey 40410 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-011 Quality Assurance Requirements for Suppliers with design
Latrobe Specialty Steel Company LAT03U 2626, S. Ligonier ST Latrobe PA (Pennsylvania)15650-3294 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Latrobe Specialty Steel Company LAT03U 2626, S. Ligonier ST Latrobe PA (Pennsylvania)15650-3294 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content Deposit
- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steel parts below 200ksi unless usage of this process has been specifically
approved by engineering authority. Note: This approbation is conditinoal to MIL-STD-870
approvalMagellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2418 Plating, Copper
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2419 Cadmium-Titanium PlatingConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 24 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening AutomaticConditional to clean shot peen per PSR-0187. For manual application, conditional to approval
of specific and detailed supplier proceddure.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2473 Chemical Film Treatment for Aluminum Alloys General Purpose CoatingLimited to type I, class 1A only, by immersion only.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0114 Conversion Coatings on Titanium and Titanium AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2486 Conversion Coating of Titanium Alloys Fluoride-Phosphate TypeConditional to approval of specific and detailled supplier procedure.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0174 Cleaning Methods for Aircrafts Landing Gear and ComponentsCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy SurfacesFor repair and overhaul process only.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysType I.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-14550 Copper Plating (Electrodeposited)
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-46168 Coating, Aliphatic Polyurethane, Chemical Agent Resistant
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-83286 Coating, Urethane, Aliphatic Isocyanate, for Aerospace Applications
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-8514 Coating Compound, Metal Pretreatment
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53022 (MIL-P-53022) Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53022 (MIL-P-53022) Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53030 (MIL-P-53030) Primer Coating, Epoxy, Water Based, Lead and Chromate Free
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53030 (MIL-P-53030) Primer Coating, Epoxy, Water Based, Lead and Chromate Free
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-14072 Finishes for Ground Based Electronic Equipment
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO code Number S-749
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46147 Lubricant, Solid Film, Air Cured, Corrosion Inhibiting
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-8937 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46147 Lubricant, Solid Film, Air Cured, Corrosion Inhibiting
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-81329 (MIL-L-81329) Lubricant, Solid Film, Extreme Environment, NATO Code Number S-1737
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1500 Cadmium-Titanium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-DepositionConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to generic technique approval.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA NONE - CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-W-5044 Walkway Compound, Nonslip and Walkway Matting, Nonslip
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.
Magellan Aerospace LAW02U 165, Field Street West Babylon NY (New York) 11704-1299 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Ledford Gage Lab Inc. LED01U 227 Industrial Drive Mulvane KS (Kansas) 67110 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ledford Gage Lab Inc. LED01U 227 Industrial Drive Mulvane KS (Kansas) 67110 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Leesta Industries Ltd LEE01C 6, Avenue du Plateau, Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5W2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Leesta Industries Ltd LEE01C 6, Avenue du Plateau, Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5W2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Leesta Industries Ltd LEE01C 6, Avenue du Plateau, Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 5W2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Lee Company (The) LEE01U 2, Pettipaug Road Westbrook CT (Connecticut) 06498-0424 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Lee Company (The) LEE01U 2, Pettipaug Road Westbrook CT (Connecticut) 06498-0424 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Lee Company (The) LEE01U 2, Pettipaug Road Westbrook CT (Connecticut) 06498-0424 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Lefell Manufacturing LEF02U 13700 Firestone Boulevard Santa Fe Springs CA (California) 90670 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Lefell Manufacturing LEF02U 13700 Firestone Boulevard Santa Fe Springs CA (California) 90670 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Lefell Manufacturing LEF02U 13700 Firestone Boulevard Santa Fe Springs CA (California) 90670 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
DCM Group Inc. (Les Industries Trident) LES04C 8277 Boul. Henri-Bourassa E. Montreal QC (Quebec) H1E 1P4 Canada PSR-0010 Quality Assurance Systems and Related Systems H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
DCM Group Inc. (Les Industries Trident) LES04C 8277 Boul. Henri-Bourassa E. Montreal QC (Quebec) H1E 1P4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 25 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
DCM Group Inc. (Les Industries Trident) LES04C 8277 Boul. Henri-Bourassa E. Montreal QC (Quebec) H1E 1P4 Canada PSR-0010 Quality Assurance Systems and Related Systems A - Approval HPS-020 Digital Product Definition / Model Based Definition
Groupe LG Cloutier LGC02C 303, boul. Nilus-Leclerc L'islet QC (Quebec) G0R 2C0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Groupe LG Cloutier LGC02C 303, boul. Nilus-Leclerc L'islet QC (Quebec) G0R 2C0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Groupe LG Cloutier LGC02C 303, boul. Nilus-Leclerc L'islet QC (Quebec) G0R 2C0 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-46168 Coating, Aliphatic Polyurethane, Chemical Agent Resistant
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO code Number S-749
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Lord Corporation LOR01U 1635, W. 12th Street Erie PA (Pennsylvania)16514-0039 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.Luvak Inc. LUV01U 722, Main Street; PO Box 597 Boylston MA (Massachusetts)01505 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Lynch Fluid Controls Inc. LYN02C 1799 Argentia Road Mississauga ON (Ontario) L5N 3A2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Lynch Fluid Controls Inc. LYN02C 1799 Argentia Road Mississauga ON (Ontario) L5N 3A2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Abipa Canada Inc. MAC02C 3700 Avenue des Grandes Tourelles Boisbriand QC (Quebec) J7H 0A1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Abipa Canada Inc. MAC02C 3700 Avenue des Grandes Tourelles Boisbriand QC (Quebec) J7H 0A1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Abipa Canada Inc. MAC02C 3700 Avenue des Grandes Tourelles Boisbriand QC (Quebec) J7H 0A1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Machine Specialaties MAC06U 6511 Franz Warner Parkway Whitsett North Carolina 27377 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
MAC Calibrations LLC MAC07U 13500 Pearl Rd. # 139 Strongsville OH (Ohio) 44136 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
MAC Calibrations LLC MAC07U 13500 Pearl Rd. # 139 Strongsville OH (Ohio) 44136 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Machining Logistics Inc. MAC25U 6640 View Park Court Riverside CA (California) 92503 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Magchem Inc. MAG01C 1271, rue Ampère Boucherville QC (Quebec) J4B 5Z5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Magchem Inc. MAG01C 1271, rue Ampère Boucherville QC (Quebec) J4B 5Z5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Magna Stainless div. of CSM ULC MAG02C / MAG02U 5775, rue Kieran Saint-Laurent (Montreal) QC (Quebec) H4S 0A3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Magna Stainless div. of CSM ULC MAG02C / MAG02U 5775, rue Kieran Saint-Laurent (Montreal) QC (Quebec) H4S 0A3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Héroux-Devtek Inc. Magtron Division MAG06U 1480 Birchmount Road Toronto ON (Ontario) M1P 2E3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Héroux-Devtek Inc. Magtron Division MAG06U 1480 Birchmount Road Toronto ON (Ontario) M1P 2E3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Héroux-Devtek Inc. Magtron Division MAG06U 1480 Birchmount Road Toronto ON (Ontario) M1P 2E3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Magnetic Inspection Laboratory. MIL MAG10U 1401, Greenleaf Avenue Elk Grove Village IL (Illinois) 60007-5522 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Manoir Aerospace MAN01O Service Commercial; Avenue Général LeclercBar sur Aube - 10200 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Manoir Aerospace MAN01O Service Commercial; Avenue Général LeclercBar sur Aube - 10200 France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Matrix Technology MAT01C / MAT01U 280 Hillmount Rd, Unit #6 Markham ON (Ontario) L6C 3A1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Matrix Technology MAT01C / MAT01U 280 Hillmount Rd, Unit #6 Markham ON (Ontario) L6C 3A1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Montreal Environmental Services Laborartory MAX01C 889, montée de Liesse Saint-Laurent (Montreal) QC (Quebec) H4T 1P5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Mayday Manufacturing Co (HI-TechMetal Finishing) MAY01U 1500, Interstate 35 West Denton TX (Texas) 76207 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Mayday Manufacturing Co (HI-TechMetal Finishing) MAY01U 1500, Interstate 35 West Denton TX (Texas) 76207 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Mayday Manufacturing Co (HI-TechMetal Finishing) MAY01U 1500, Interstate 35 West Denton TX (Texas) 76207 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
McCann Equipement Ltee MCC01C 10255, chemin Côte-de-Liesse Dorval QC (Quebec) H9P 1A3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Measurement Specialities Inc. MEA01U 10522 Success Lane Dayton OH (Ohio) 45458 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Measurement Specialities Inc. MEA01U 10522 Success Lane Dayton OH (Ohio) 45458 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-17025 General requirements for the competence of testing and calibration laboratories
Mecaer America Inc. MEC09C 5555 rue William-Price Laval QC (Quebec) H7L 6C4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Meggitt Aircraft Braking Systems MEG06U 1204, Massillon Road Akron OH (Ohio) 44306 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Meggitt Aircraft Braking Systems MEG06U 1204, Massillon Road Akron OH (Ohio) 44306 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Merrill Aviation and Defense MER02U 1023 S. Wheeler Saginaw Michigan 48602 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Merrill Aviation and Defense MER02U 1023 S. Wheeler Saginaw Michigan 48602 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekLGPVC LGPVC supplier
Mesotec MES05C 4075, Portland Sherbrooke QC (Quebec) J1L 0H3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Mesotec MES05C 4075, Portland Sherbrooke QC (Quebec) J1L 0H3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Mesotec MES05C 4075, Portland Sherbrooke QC (Quebec) J1L 0H3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Mesotec MES05C 4075, Portland Sherbrooke QC (Quebec) J1L 0H3 Canada PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE C - Conditional Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNew facility to be reapproved.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 26 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Mesotec MES05C 4075, Portland Sherbrooke QC (Quebec) J1L 0H3 Canada PSR-0212 Installation of Lube Fitting NONE C - Conditional Approval HPS-212 Installation of Lube Fitting New facility to be reapproved.Mesotec MES05C 4075, Portland Sherbrooke QC (Quebec) J1L 0H3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress Relief of Steel Parts
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and Higher
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel Parts
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel Parts
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/7 Carburizing and Heat Treatment of Carburizing Grade Steel Parts
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in Vacuum
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2770 Heat Treatment of Wrought Aluminum Alloy Parts
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2771 Heat Treatment of Aluminum Alloy Castings
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6088 Heat Treatment of Aluminum Alloys
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS A Heat Treatment of Steel Raw Materials
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS B Heat Treatment of Steel Raw Materials
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS C Heat Treatment of Steel Raw Materials
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS D Heat Treatment of Steel Raw Materials
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Metcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT A - Approval HPS-129 Stress Relief and Hydrogen Embrittlement ReliefRestrict to performed stress relief on the following materials: Austenitic corrosion resistant
steels; precipitation-hardening corrosion resistant and maraging steels; Martensitic corrosion
resistant steels; Aluminum AlloysMetcor MET02C / MET07U 560, boul. Arthur-Sauvé Saint-Eustache QC (Quebec) J7R 5A8 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment A - Approval HPS-216 Heat Treatment of Corrosion - Resistant Steel
Metal Improvement MET03C 105, Alfred Kuehne Blvd Brampton ON (Ontario) L6T 4K3 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval AMS-2430 Shot Peening, Automatic6 MONTHS CONDITIONAL APPROVAL GRANTED. PERMANENT APPROVAL WILL BE GRANTED
AFTER COMPLETION OF ONSITE AUDIT/VERIFICATION OF PROCESS
Metal Improvement MET03C 105, Alfred Kuehne Blvd Brampton ON (Ontario) L6T 4K3 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.Metal Improvement MET03C 105, Alfred Kuehne Blvd Brampton ON (Ontario) L6T 4K3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Metal Improvement MET03C 105, Alfred Kuehne Blvd Brampton ON (Ontario) L6T 4K3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Metal Improvement MET03C 105, Alfred Kuehne Blvd Brampton ON (Ontario) L6T 4K3 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal Parts6 MONTHS CONDITIONAL APPROVAL GRANTED. PERMANENT APPROVAL WILL BE GRANTED
AFTER COMPLETION OF ONSITE AUDIT/VERIFICATION OF PROCESS
Metal Improvement MET03C 105, Alfred Kuehne Blvd Brampton ON (Ontario) L6T 4K3 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.Metal Improvement MET05U 103 s.41ST Ave. Phoenix AZ (Arizona) 85009 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Metal Improvement MET14U 1450, Avenue S Grand Prairie TX (Texas) 75050 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening, Automatic6 months approval based on NADCAP accreditation for AC117/2 to automated peening and
letter received stating Metal Improvement fully meets all requirements of AMS 2430
Metal Improvement MET14U 1450, Avenue S Grand Prairie TX (Texas) 75050 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.Metal Improvement MET14U 1450, Avenue S Grand Prairie TX (Texas) 75050 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Metal Improvement MET14U 1450, Avenue S Grand Prairie TX (Texas) 75050 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.
Metal Improvement MET14U 1450, Avenue S Grand Prairie TX (Texas) 75050 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.
Metal Improvement MET14U 1450, Avenue S Grand Prairie TX (Texas) 75050 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.Metal Improvement Company (Everlube Products Division) MET16U 100 Cooper Circle Peachtree City GA (Georgia) 30269-7969 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Metal Improvement Company (Everlube Products Division) MET16U 100 Cooper Circle Peachtree City GA (Georgia) 30269-7969 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Metal Improvement Company (Everlube Products Division) MET16U 100 Cooper Circle Peachtree City GA (Georgia) 30269-7969 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Mettis Aerospace MET18O Windsor Road Redditch Worcestershire - B97 6EF UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Metal Improvement Co. MET19U 1652 East Highland Road Twinsburg OH (Ohio) 44087 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval AMS-2430
Conditional to clean Shot peen per
PSR0187. For manual application,
conditional to approval of specific
adn detailed supplier procedure.
Conditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Metal Improvement Co. MET19U 1652 East Highland Road Twinsburg OH (Ohio) 44087 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval AMS-S-13165
Conditional to clean Shot peen per
PSR0187. For manual application,
conditional to approval of specific
adn detailed supplier procedure.
Conditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Metal Improvement Co. MET19U 1652 East Highland Road Twinsburg OH (Ohio) 44087 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Metal Improvement Co. MET19U 1652 East Highland Road Twinsburg OH (Ohio) 44087 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Metal Improvement Co. MET19U 1652 East Highland Road Twinsburg OH (Ohio) 44087 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval HPS-126
Conditional to clean Shot peen per
PSR0187. For manual application,
conditional to approval of specific
adn detailed supplier procedure.
Conditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Metal Improvement Co. MET19U 1652 East Highland Road Twinsburg OH (Ohio) 44087 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval MIL-S-13165
Conditional to clean Shot peen per
PSR0187. For manual application,
conditional to approval of specific
adn detailed supplier procedure.
Conditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Metal Improvement Co. MET21U 2151 S. Hathaway Santa Ana CA (California) 92705 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval AMS-2430 Shot Peening Automatic
Metal Improvement Co. MET21U 2151 S. Hathaway Santa Ana CA (California) 92705 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Metal Improvement Co. MET21U 2151 S. Hathaway Santa Ana CA (California) 92705 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Metal Improvement Co. MET21U 2151 S. Hathaway Santa Ana CA (California) 92705 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to pyrometry per PSR-0215. Conditional to usage with AMS 2759/9 and AMS-
2759/11.Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress Relief of Steel Parts Conditional to Pyrometry per PSR-0215.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to Pyrometry per PSR-0215.Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw Materials Conditional to pyrometry per PSR-0215. Limited to stress relief only.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval ASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Inspector level 2 and 3 only. Limited
to pre-penetrant etch, when required, at an approved supplier to HPS-306 (PSR-0106).
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval ASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Inspector level 2 and 3 only. Subject
to all techniques approval and manufacturing plan review.Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Inspector level 2 and 3 only. Limited
to pre-penetrant etch, when required, at an approved supplier to HPS-306 (PSR-0106).
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle InspectionConditional to NDT personnel certification per PSR-0310. Inspector level 2 and 3 only. Subject
to all techniques approval and manufacturing plan review.Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP-Chemical Processing A - Approval HPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR-0215.Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-170 General Requirements for Painting
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0206 Abrasive Blasting CP-Chemical Processing A - Approval HPS-206 Abrasive BlastingLimited to aluminum oxide and subject technique approved by HD. Aluminum oxyde grit 120
need to be used.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0215 Pyrometry HT-Heat Treatment A - Approval HPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, CLASS A Heat Treatment of Steel, Process forConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0206 Abrasive Blasting CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1503 Preparation of Aluminum Alloys for surface Treatment and Inorganic CoatingLimited to aluminum oxide and subject technique approved by HD. Aluminum oxyde grit 120
need to be used.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 27 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0206 Abrasive Blasting CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1504 Abrasive BlastingLimited to aluminum oxide and subject technique approved by HD. Aluminum oxyde grit 120
need to be used.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval MIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Inspector level 2 and 3 only. Subject
to all techniques approval and manufacturing plan review.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval MIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Inspector level 2 and 3 only. Limited
to pre-penetrant etch, when required, at an approved supplier to HPS-306 (PSR-0106).
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing C - Conditional approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing C - Conditional approval HPS-171 Stripping of Inorganic coatingsConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0173 Cleaning CP-Chemical Processing C - Conditional approval HPS-173 Cleaning
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0175 Chromium Plating CP-Chemical Processing C - Conditional approval HPS-175 Chromium Plating (electrodeposited Low Embritlement)
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional approval HPS-126 Shot Peening of Metal PartsConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment C - Conditional approval HPS-216 Heat Treatment of Corrosion - Resistant SteelConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Metal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional approval HPS-182 Grinding of High Strength Steels and of Chrome plate (180,000 PSI and over)Conditional to Techniques approval and acceptance of barkhausen noise inspection P/N for
First Production BatchMetal Finishing Company MET69U 1423, S. Mclean Blvd Wichita KS (Kansas) 67213 USA CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2418 Plating Copper Type 2: Masking Conditional so Streff Relief and Hydrogen Embrittlement Relief per PSR0129 MHD-Rockland MHD01C_MHD01U 205, Brunswick Blvd., Suite 100 Pointe-Claire (Montreal) QC (Quebec) H9R 1A5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
MHD-Rockland MHD01C_MHD01U 205, Brunswick Blvd., Suite 100 Pointe-Claire (Montreal) QC (Quebec) H9R 1A5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Michigan Spline & Gage Company MIC02U 1626 East Nine Mile Road Hazel Park MI (Michigan) 48030 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Michigan Spline & Gage Company MIC02U 1626 East Nine Mile Road Hazel Park MI (Michigan) 48030 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-17025 General requirements for the competence of testing and calibration laboratories
Micro Laboratories Inc. MIC03U 7158 Industrial Part Blvd, Mentor OH (Ohio) 44060 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Micro Laboratories Inc. MIC03U 7158 Industrial Part Blvd, Mentor OH (Ohio) 44060 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Microfinish MIC04U 865 Scholz Drive Vandale OH (Ohio) 45377 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Mitutoyo MTI Canada Ltd MIT02C 2121, Meadowvale Blvd Mississauga ON (Ontario) L5N 5N1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
MIT Distributor MIT02U 205 Hembree Park Drive Suite 105 Roswell GA (Georgia) 30076 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation
MIT Distributor MIT02U 205 Hembree Park Drive Suite 105 Roswell GA (Georgia) 30076 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Molle Industriali Conte Srl MOL02U Strada Cebrosa 22A Settimo Torino Italy PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Molle Industriali Conte Srl MOL02U Strada Cebrosa 22A Settimo Torino Italy PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless and PH Stainless Steels; CL-D.
Molle Industriali Conte Srl MOL02U Strada Cebrosa 22A Settimo Torino Italy PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Molle Industriali Conte Srl MOL02U Strada Cebrosa 22A Settimo Torino Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Molle Industriali Conte Srl MOL02U Strada Cebrosa 22A Settimo Torino Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Moncar Precision Inc. MON03C 1740, boul. Dagenais Ouest Laval QC (Quebec) H7L 5C7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Moncar Precision Inc. MON03C 1740, boul. Dagenais Ouest Laval QC (Quebec) H7L 5C7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Moncar Precision Inc. MON03C 1740, boul. Dagenais Ouest Laval QC (Quebec) H7L 5C7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Moovinv Aerospace Defense MOO06C 166 Rue Cowie # 101, Granby QC J2G 3V3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management System - Requirements for Aviation
Moovinv Aerospace Defense MOO06C 166 Rue Cowie # 101, Granby QC J2G 3V3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Moovinv Aerospace Defense MOO06C 166 Rue Cowie # 101, Granby QC J2G 3V3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Morgan Bronze Products Inc. MOR01U 340 East IL-22 Lake Zurich IL (Illinois) 60047 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerosapce - Model for Quality Assurance in
Morgan Bronze Products Inc. MOR01U 340 East IL-22 Lake Zurich IL (Illinois) 60047 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Morgan Bronze Products Inc. MOR01U 340 East IL-22 Lake Zurich IL (Illinois) 60047 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
Motech Distributeur Inc. MOT01C 255 boul Montcalm Nord Candiac QC (Quebec) J5R 3L6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Nalco Canada Co NAL01C C.P. 11522, succ. Centre-ville Montreal QC (Quebec) H3C 5N7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Air-Industries Machining Corp-Nassau Tool Works NAS02U 1479 North Clinton Avenue Bay Shore New York NY (New York) 11706 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Air-Industries Machining Corp-Nassau Tool Works NAS02U 1479 North Clinton Avenue Bay Shore New York NY (New York) 11706 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Air-Industries Machining Corp-Nassau Tool Works NAS02U 1479 North Clinton Avenue Bay Shore New York NY (New York) 11706 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Management System - Requirements
Nasco Aerospace and Electronics LLC NAS03U 150 2nd Ave. N. Suite 550 St.Petersburg Florida 33701 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
National Peening NAT04U 23800 Corbin Drive Unit B Bedford Heights OH (Ohio) OH (OHIO) 44128 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval AMS-2430 Shot Peening, Automatic
National Peening NAT04U 23800 Corbin Drive Unit B Bedford Heights OH (Ohio) OH (OHIO) 44128 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval AMS-2432 Shot Peening, Computer Monitored
National Peening NAT04U 23800 Corbin Drive Unit B Bedford Heights OH (Ohio) OH (OHIO) 44128 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
National Calibration Inc. NAT10C 2380, Wyecroft Road; Unit #11 Oakville ON (Ontario) L6L 6W1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
National Calibration Inc. NAT10C 2380, Wyecroft Road; Unit #11 Oakville ON (Ontario) L6L 6W1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
National Machine Company NAT11U 4880, Hudson Drive Stow OH (Ohio) 44224-1708 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
National Machine Company NAT11U 4880, Hudson Drive Stow OH (Ohio) 44224-1708 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
National Machine Company NAT11U 4880, Hudson Drive Stow OH (Ohio) 44224-1708 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
National Technical Systems Inc. NAT12C 2425 blvd Industriel Chambly QC (Quebec) J3L 4W3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
National Technical Systems Inc. NAT12C 2425 blvd Industriel Chambly QC (Quebec) J3L 4W3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
National Peening NAT17U 1902, Weinig Street Statesville NC (North Carolina)28677 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval AMS-2430 Shot Peening, AutomaticConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.National Peening NAT17U 1902 Weinig Street Statesville NC (North Carolina)28677 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
National Peening NAT17U 1902, Weinig Street Statesville NC (North Carolina)28677 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
National Technical System SLTM inc NAT22C 150 Trillium Drive, Kitchener Ontario N2E 2C4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
National Technical System SLTM inc NAT22C 150 Trillium Drive, Kitchener Ontario N2E 2C4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO 17025 General requirements for the competence of testing and calibration laboratories
Nelson Nameplate Co. (Nelson-Miller) NEL61U 2800, Casitas Avenue Los Angeles CA (California) 90039-2942 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Nelson Nameplate Co. (Nelson-Miller) NEL61U 2800, Casitas Avenue Los Angeles CA (California) 90039-2942 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Nelson Nameplate Co. (Nelson-Miller) NEL61U 2800, Casitas Avenue Los Angeles CA (California) 90039-2942 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2770 Heat Treatment of Wrought Aluminum Alloy PartsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-8937 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 28 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-81329 (MIL-L-81329) Lubricant, Solid Film, Extreme Environment, NATO Code Number S-1737
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.New Hampshire Ball Bearing NEW02U 155, Lexington Drive Laconia NH (New Hampshire)03246-2993 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.
Nitrex Métal Technologies NIT01C 3474, boul. Poirier Saint-Laurent (Montreal) QC (Quebec) H4R 2J5 Canada PSR-0215 Pyrometry HT-Heat Treatment L - Limited Approval AMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Nitrex Métal Technologies NIT01C 3474, boul. Poirier Saint-Laurent (Montreal) QC (Quebec) H4R 2J5 Canada PSR-0269 Nitriding HT-Heat Treatment L - Limited Approval AMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Nitrex Métal Technologies NIT01C 3474, boul. Poirier Saint-Laurent (Montreal) QC (Quebec) H4R 2J5 Canada PSR-0269 Nitriding HT-Heat Treatment L - Limited Approval AMS-2759/10 Automated Gaseous Nitriding by Nitriding PotentielConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Nitrex Métal Technologies NIT01C 3474, boul. Poirier Saint-Laurent (Montreal) QC (Quebec) H4R 2J5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Nitrex Métal Technologies NIT01C 3474, boul. Poirier Saint-Laurent (Montreal) QC (Quebec) H4R 2J5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemL - Limited Approval HPS-010 Quality Assurance Requirements for SuppliersLimited to commercial contracts only. Military contracts (CGP, ITAR) are not authorized.
Nitrex Operations - Nevada NIT03U 201 Mayflower Ave. North Las Vegas NE (Nevada) USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements
Nitrex Operations - Nevada NIT03U 201 Mayflower Ave. North Las Vegas NE (Nevada) USA PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/10 Automated Gaseous Nitriding by Nitriding PotentielConditional to Pyrometry per AMS 2750
Nitrex Operations - Nevada NIT03U 201 Mayflower Ave. North Las Vegas NE (Nevada) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Nitrex Operations - Nevada NIT03U 201 Mayflower Ave. North Las Vegas NE (Nevada) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Nitrex Operations - Nevada NIT03U 201 Mayflower Ave. North Las Vegas NE (Nevada) USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress relief of Steel Parts Conditional to Pyrometry per PSR0215.
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, Chromium Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2461 Plating Brush General Requirements -Conditional to usage with one of the ASM 2451/1 to AMS2451/13. - Conditional to Annual Operator Qualification. - Conditional to Stress relief and Huydrogen Embrittlement Relief per PSR 0129 to embrittling plating conditions. - Specify approved Brush deposit and substrate.
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels Conditional to approval of specific and detailled supplier procedure. Specify method and type
used.
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320, Class 2 Chromium Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0107 Cadmium Plating (Electro-deposited){Bright Cadmium} H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium (Electrodeposited)- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steels below 180ksi.
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, (Electrodeposited)- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. - Limited to
steel parts below 200ksi unless usage of this process has been specifically approved by
engineering authority.NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type I Anodic Coartings for Aluminum and Aluminum Alloys
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type II Anodic Coatings for aAluminum and Aluminum AlloysConditional to techniques approval.
NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type III Anodic Coatings for Aluminum and Aluminum Alloys- Conditional to techniques approval. - Conditinal to approval of specific and detailed supplier
procedure.
- Conditional to approval of specific and detailled supplier procedure.NMB-Minebea UK Ltd NMB01U Doddington Road Doddington Lincoln LN6 3RA UK (United Kingdom)PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Sonaca NMF Canada Inc. NMF01C 13075, rue Brault, Saint-Janvier Mirabel QC (Quebec) J7J 1P3 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.Sonaca NMF Canada Inc. NMF01C 13075, rue Brault, Saint-Janvier Mirabel QC (Quebec) J7J 1P3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Sonaca NMF Canada Inc. NMF01C 13075, rue Brault, Saint-Janvier Mirabel QC (Quebec) J7J 1P3 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Sonaca NMF Canada Inc. NMF01C 13075, rue Brault, Saint-Janvier Mirabel QC (Quebec) J7J 1P3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sonaca NMF Canada Inc. NMF01C 13075, rue Brault, Saint-Janvier Mirabel QC (Quebec) J7J 1P3 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Method A only.
Sonaca NMF Canada Inc. NMF01C 13075, rue Brault, Saint-Janvier Mirabel QC (Quebec) J7J 1P3 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.
Sonaca NMF Canada Inc. NMF01C 13075, rue Brault, Saint-Janvier Mirabel QC (Quebec) J7J 1P3 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.NMT Specialized Machining Inc. NMT01C / NMT01U 290, Shoemaker Street Kitchener ON (Ontario) N2E 3E1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
NMT Specialized Machining Inc. NMT01C / NMT01U 290, Shoemaker Street Kitchener ON (Ontario) N2E 3E1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada MULTIPLE Multiple CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAC-7108 Nadcap Audit Criteria for Chemical Processing
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113, Brush Chemical Film treatment for Aluminium alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113, Immersion Chemical Film treatment for Aluminium alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted Bushings
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0213 Staking Procedure NONE A - Approval HPS-213 Staking Procedure
Noranco Manufacturing NOR07C / NOR07U 1842, Clements Road Pickering ON (Ontario) L1W 3R8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
NSL Analytical Services Inc. NSL01U 4450 Cranwood Parkway Cleveland OH (Ohio) 44128 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
NSL Analytical Services Inc. NSL01U 4450 Cranwood Parkway Cleveland OH (Ohio) 44128 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0107 Cadmium Plating (Electro-deposited){Bright Cadmium}CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, Cadmium- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steels below 180ksi.
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, Cadmium
- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steel parts below 200ksi unless usage of this process has been specifically
approved by engineering authority.
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401Plating, Cadmium, Low Hydrogen
Content Deposit
- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steel parts below 200ksi unless usage of this process has been specifically
approved by engineering authority.Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2403 Plating, Nickel General Purpose Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Plating, Chromium Hard Deposit Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2407 Plating, Chromium, Porous Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2438Plating, Chromium Thin, Hard, Dense
DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, Chromium Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2469
Hard Anodic Coating Treatment of
Aluminum and Aluminum Alloys
Processing and Performance
Requirements
- Conditional to techniques approval.
- Conditional to approval of specific and detailled supplier procedure.
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470Anodic Treatment of Aluminum
Alloys, Chromic Acid Process
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471Anodic Treatment for Aluminum
Alloys Sulfuric Acid Process, Undyed
Coating
Conditional to techniques approval.
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2472Anodic Treatment for Aluminum
Alloys Sulfuric Acid Process, Dyed
Coating
Conditional to techniques approval.
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0114 Conversion Coatings on Titanium and Titanium AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2486Conversion Coating of Titanium Alloys
Fluoride-Phosphate TypeConditional to approval of specific and detailled supplier procedure.
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-5541Chemical Conversion Coatings on
Aluminum and Aluminum Alloys
- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 29 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0220 CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-81769Chemical Milling of Metals,
Specification forConditional to approval of specific and detailled supplier procedure
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320, Class 2 Chromium Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290, Class 2 Nickel Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, (Electrodeposited)
- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Limited to steel parts below 200ksi unless usage of this process has been specifically
approved by engineering authority.
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100
Quality Systems - Aerospace - Model
for Quality Assurance in Design,
Development, Production, Installation
and Servicing
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0505 Corrosion/Salt Spray TestingMTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B117 Corrosion/Salt Spray Testing
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0513 Coating Weight Testing MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B137
Standard Test Method for
Measurement of Coating Mass Per
Unit Area on Anodically Coated
Aluminum
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0516 Thickness Verification of Magnetic, Eddy Current and XRF MachinesMTL/CP/CT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B244
Standard Test Method for
Measurement of Thickness of Anodic
Coatings on Aluminum and Other
Nonconductive Coatings on
Nonmagnetic Basis Metals with Eddy-
Current Instruments
Specify techniques used
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0516 Thickness Verification of Magnetic, Eddy Current and XRF MachinesMTL/CP/CT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B499
Standard Test Method for
Measurement of Coating Thickness
by the Magnetic Method:
Nonmagnetic Coatings on Magnetic
Basis Metals
Specify techniques used
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0504 Microhardness MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B578Standard Test Method for
Microhardness of Electroplated
Coatings
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0173 Cleaning CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B600Standard Guide for Descaling and
Cleaning Titanium and Titanium Alloy
Surfaces
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0512 Adhesion Bend Testing (Metallic Coatings)MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B751Standard Specification for General
Requirements for Nickel and Nickel
Alloy Welded Tube
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0510 Adhesion Tape Testing MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-D3359Standard Test Method for Measuring
Adhesion by Tape Test
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1004Electrical Conductivity, Using the
Electromagnetic (Eddy-Current)
Method, Determining
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417Standard Practice for Liquid
Penetrant TestingConditional to NDT personnel certification per PSR0310
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0317 Magnetic Particle InspectionMTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444Standard Practice for Magnetic
Particle TestingConditional to NDT personnel certification per PSR0310
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0512 Adhesion Bend Testing (Metallic Coatings)MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E290 Bend Testing of Material for Ductility
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E3Standard Practice for Preparation of
Metallographic Specimens
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0504 Microhardness MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E384Standard Test Method For
Microindentation Hardness of
Materials
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010Quality Assurance Requirements for
Suppliers Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Nu-Pro Limited NUP01O Eagle Works London Rd. Thrupp Stroud Gloucester GL5 2BA UK (United Kingdom)PSR-0509 MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekPSR-0509 Taber Wear Testing
Chemetall USA (NDT Testing Lab) OAK01C 1100 Technology Drive Jackson Michigan 49201 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Chemetall USA (NDT Testing Lab) OAK01C 1100 Technology Drive Jackson Michigan 49201 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO 17025 General requirements for the competence of testing and calibration laboratories
Chemetall USA (NDT Testing Lab) OAK01C 1100 Technology Drive Jackson Michigan 49201 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO 9001 Quality Management System - Requirements
Chemetall USA (NDT Testing Lab) OAK01C 1100 Technology Drive Jackson Michigan 49201 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO 14000 Environmental Management Systems
OCS Technology Inc. OCS01U 14901 Emery Avenue Cleveland OH (Ohio) 44135 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
OCS Technology Inc. OCS01U 14901 Emery Avenue Cleveland OH (Ohio) 44135 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
O Fallon Castin OFA01U 600 Cannonball Lane O'Fallon MO 63366 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
O Fallon Castin OFA01U 600 Cannonball Lane O'Fallon MO 63366 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ohio Gasket and Shim (OGS industries) OHI10U 9763 Evans Avenue Akron OH (Ohio) 44305 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Ohio Gasket and Shim (OGS industries) OHI10U 9763 Evans Avenue Akron OH (Ohio) 44305 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ohio Gasket and Shim (OGS industries) OHI10U 9763 Evans Avenue Akron OH (Ohio) 44305 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-14001 Environmental Management Systems - Requirements with Guidance for use / Systèmes de management environnemental - Exigences et lignes directrices pour son utilisation
Ohio Gasket and Shim (OGS industries) OHI10U 9763 Evans Avenue Akron OH (Ohio) 44305 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Olympic Scientific Inc. OLY01U 4246 24th Avenue West Seattle WA (Washington)98199-1216 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing L - Limited Approval AMS-2700 Passivation of Corrosion Resistant SteelsLimited to Method 1, type 2 and Type 8 only.OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0215 Pyrometry HT-Heat Treatment L - Limited Approval AMS-2750 Pyrometry Limited to Furnace "F".
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment L - Limited Approval AMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to usage with AMS2759/3. Conditional to Pyrometry per AMS2750. Conditional to
techniques approval for parts above 180 KSI. Limited to furnace "F". Conditional to operator
qualification per ARP1962 for straightening operations.
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment L - Limited Approval AMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS2750. Conditional to techniques approval for parts above
180 KSI. Limited to furnace "F". Conditional to operator qualification per ARP1962 for
straightening operations.OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval ASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR0310.
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval ASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR0310. Subject to techniques approval.
Inspectors Level 2 and 3.OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR0310. Inspector Level 2 and 3. OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing L - Limited Approval HPS-113 Chemical Film Treatment for Aluminum AlloysLimited to type I, class 1A only, by immersion only.
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle InspectionConditional to NDT personnel certification per PSR0310. Subject to techniques approval.
Inspectors Level 2 and 3.OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0173 Cleaning CP-Chemical Processing A - Approval HPS-173 Cleaning Limited to Type 4 (Alkaline degreasing), by immersion only.OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval HPS-202 Solid, Film lubricant, Application
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted Bushings
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0212 Installation of Lube Fitting NONE A - Approval HPS-212 Installation of Lube Fitting
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0213 Staking Procedure NONE A - Approval HPS-213 Staking Procedure
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0214 Spherical bearing installation by roller SwageNONE A - Approval HPS-214 Spherical Bearing Installation by Roller Swage
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing L - Limited Approval HPS-306 Pre-penetrant Etching Limited to Class 3 (Corrosion Resistant Steels) and Class 6 (Aluminum Alloys).OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-14000 Environmental Management Systems
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval MIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High Solids
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval MIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings: Epoxy, Waterborne
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval MIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR0310.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 30 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval MIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR0310. Subject to techniques approval.
Inspectors Level 2 and 3.OMA (Officine Meccaniche Aeronautiche) S.p.A. OMA02U Via Cagliari 20 Foligno Perugia (PG) [Umbria]06034 Italy PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing A - Approval NAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Levels 2 and 3.Omni Machine Corp. OMN01U 9722, Jordan Circle Santa Fe Springs CA (California) 90670 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Omni Machine Corp. OMN01U 9722, Jordan Circle Santa Fe Springs CA (California) 90670 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Omni Metal Finishing OMN05U 11665, Coley River Circle Fountain Valley CA (California) 92708 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290, Class 2 Nickel Plating (Electrodeposition ) Class 2
Omni Metal Finishing OMN05U 11665, Coley River Circle Fountain Valley CA (California) 92708 USA PSR-0104 Shot Peening of Metal Parts CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290, Class 2 Nickel Plating (Electrodeposition ) Class 2
Omni Metal Finishing OMN05U 11665, Coley River Circle Fountain Valley CA (California) 92708 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Omni Metal Finishing OMN05U 11665, Coley River Circle Fountain Valley CA (California) 92708 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Omni Metal Finishing OMN05U 11665, Coley River Circle Fountain Valley CA (California) 92708 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Omni Metal Finishing OMN05U 11665, Coley River Circle Fountain Valley CA (California) 92708 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290, Class 2 Nickel Plating (Electrodeposition ) Class 2
Omni Metal Finishing OMN05U 11665, Coley River Circle Fountain Valley CA (California) 92708 USA PSR-0104 Shot Peening of Metal Parts CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290, Class 2 Nickel Plating (Electrodeposition ) Class 2
Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)NONE C - Conditional Approval HPS-182 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE L - Limited Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsLimited to Procedure or Techniques for Bushing Installation.Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0212 Installation of Lube Fitting NONE A - Approval HPS-212 Installation of Lube Fitting
Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0213 Staking Procedure NONE L - Limited Approval HPS-213 Staking Procedure Limited approval to Procedure or Techniques for Assembly by staking.Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0214 Spherical bearing installation by roller SwageNONE L - Limited Approval HPS-214 Spherical Bearing Installation by Roller SwageLimited approval to Procedure or Techniques for Bearings Installation.
Onamac Industries Inc. ONA01U 6300 Merril Creek Pkwy Everrett WA (Washington)98203 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-866 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or OverConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0302 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-STD-2154 Inspection, Ultrasonic, Wrought Metals, Process for Conditional to NDT personnel certification per PSR0310
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0303 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1742 Standard Practice for Radiographic Examination Conditional to NDT personnel certification per PSR0310
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0302 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E2375 Standard Practice for Ultrasonic Tesitng of Wrought ProductsConditional to NDT personnel certification per PSR0310
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Mistras Services (Inc.) OPT01C 915, rue St-Charles Saint-Lambert QC (Quebec) J4P 2A2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Mistras Services (Cudahy) OPT07U 8427 Atlantic Ave. Cudahy CA (California) 90201 USA PSR-0319 Structural Examination of Titanium Alloys Inspection ProcedureCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2643 Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
Mistras Services (Cudahy) OPT07U 8427 Atlantic Ave. Cudahy CA (California) 90201 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels Conditional to approval of specific and detailled supplier procedure.
Mistras Services (Cudahy) OPT07U 8427 Atlantic Ave. Cudahy CA (California) 90201 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.
- Specify method and type used.Mistras Services (Cudahy) OPT07U 8427 Atlantic Ave. Cudahy CA (California) 90201 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Mistras Services (Cudahy) OPT07U 8427 Atlantic Ave. Cudahy CA (California) 90201 USA PSR-0173 Cleaning CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
Mistras Services (Cudahy) OPT07U 8427 Atlantic Ave. Cudahy CA (California) 90201 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Mistras Services (Cudahy) OPT07U 8427 Atlantic Ave. Cudahy CA (California) 90201 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Mistras Services (Cudahy) OPT07U 8427 Atlantic Ave. Cudahy CA (California) 90201 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval HPS-118 Temper Etch Inspection Conditional to generic technique approval.
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to NDT personnel certification per ARP 1923 or training per PSR-0310.
Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Orbit Industries Inc. ORB01U 6840, Lake Abram Drive Middleburg Heights (Cleveland)OH (Ohio) 44130 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B594 Aluminum Alloy Wrought Products for Aerospace Applications, Ultrasonic Inspection ofConditional to NDT personnel certification per PSR0310
Orbit NDT - Bedford ORB03U 23800 Corbin Dr. Bedford Heights OH (Ohio) 44128 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval ASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Orbit NDT - Bedford ORB03U 23800 Corbin Dr. Bedford Heights OH (Ohio) 44128 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Orbit NDT - Bedford ORB03U 23800 Corbin Dr. Bedford Heights OH (Ohio) 44128 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle InspectionSpecify Inspector Level (2 and/or 3) Conditional to NDT personnel certification per PSR-0310.
Subject to techniques approval.Orbit NDT - Bedford ORB03U 23800 Corbin Dr. Bedford Heights OH (Ohio) 44128 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval HPS-118 Temper Etch Inspection Conditional to NDT personnel certification per ARP 1923 or training per PSR0310.Orbit NDT - Bedford ORB03U 23800 Corbin Dr. Bedford Heights OH (Ohio) 44128 USA PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT A - Approval HPS-129 Stress Relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR0215.Orbit NDT - Bedford ORB03U 23800 Corbin Dr. Bedford Heights OH (Ohio) 44128 USA PSR-0173 Cleaning CP-Chemical Processing A - Approval HPS-173 Cleaning
OTTO Excellence OTT02U 2, East Main Street Carpentersville IL (Illinois) 60110 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Consolidated Precision Products PAC02U 705, Industrial Avenue Port Hueneme CA (California) 93041 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Consolidated Precision Products PAC02U 705, Industrial Avenue Port Hueneme CA (California) 93041 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Pacific Forge Inc. PAC03U 10641, Etiwanda Avenue Fontana CA (California) 92337 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Pacific Forge Inc. PAC03U 10641, Etiwanda Avenue Fontana CA (California) 92337 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 31 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat treatment Precipitation Hardening Corrosion Resistant and Maraging steel partsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington 98032 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Pacific Metallurgical Inc. PAC09U 925 5th Avenue South Washington NY (New York) 98032 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-216 Heat Treatment of Corrosion - Resistant SteelConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to Operator
qualification per ARP 1962 for straightening operations.Pankl Aerospace Systems PAN02U 16615, Edwards Road Cerritos CA (California) 90703 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Parker-Hannifin - Irvine PAR04U 14300 Alton Parkway Irvine CA (California) 92618-1898 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Parker Aerospace - Aircraft & Brake - Avon PAR05U 1160, Center Road Avon OH (Ohio) 44011-1297 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Parker Aerospace - Aircraft & Brake - Avon PAR05U 1160, Center Road Avon OH (Ohio) 44011-1297 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Parker Aerospace - Aircraft & Brake - Avon PAR05U 1160, Center Road Avon OH (Ohio) 44011-1297 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design
Parker Aerospace - Aircraft & Brake - Avon PAR05U 1160, Center Road Avon OH (Ohio) 44011-1297 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Parker-Hanafin Corp PAR06U 1425, West 2675 North Ogden UT (Utah) 84404 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Parker-Hanafin Corp PAR06U 1425, West 2675 North Ogden UT (Utah) 84404 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Parker-Hannifin - Parflex Division (Texloc operations) PAR11U 4700 Lone Star Blvd. Fort Worth TX (Texas) 76106 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Parker-Hannifin - Parflex Division (Texloc operations) PAR11U 4700 Lone Star Blvd. Fort Worth TX (Texas) 76106 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Parker-Hannifin - Parflex Division (Texloc operations) PAR11U 4700 Lone Star Blvd. Fort Worth TX (Texas) 76106 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Pattonair (formerly Abscoa) PAT02U 1900, Robotics Place Fort Worth TX (Texas) 76118-7128 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Paulo Products PAU06U 4827 Chelsea ave. Kansas City MO (Missouri) 64130 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Steels; CL-A.
Paulo Products PAU06U 4827 Chelsea ave. Kansas City MO (Missouri) 64130 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Paulo Products PAU06U 4827 Chelsea ave. Kansas City MO (Missouri) 64130 USA PSR-0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Paulo Products PAU06U 4827 Chelsea ave. Kansas City MO (Missouri) 64130 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Paulo Products PAU06U 4827 Chelsea ave. Kansas City MO (Missouri) 64130 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Paulo Products PAU06U 4827 Chelsea ave. Kansas City MO (Missouri) 64130 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Perez Machine PER11U 1501 W. 134th St. Gardena CA (California) 90249 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Perez Machine PER11U 1501 W. 134th St. Gardena CA (California) 90249 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC Supplier
Pervi Precision PER13U 220 Knickerbocker ave. Bohemia NY (New York) 11716 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Plasma Technologies Inc. PLA01U 1754 Crenshaw Blvd. Torrance CA (California) 90501 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Plasma Coating Corp. PLA02U 13309 S. Western Ave. Gardena CA (California) 90249 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Platco / OMS Division PLA13U 33501 Lake Road Suite #1 Avon Lake OH (Ohio) 44012 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Platco / OMS Division PLA13U 33501 Lake Road Suite #1 Avon Lake OH (Ohio) 44012 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Plating Perceptions Inc PLA14U 8815 Herrick Road Twinsburg OH (Ohio) 44087-0081 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, Chromium Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Plating Perceptions Inc PLA14U 8815 Herrick Road Twinsburg OH (Ohio) 44087-0081 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels- Conditional to approval of specific and detailled supplier procedure. - Specify method and type used.
Plating Perceptions Inc PLA14U 8815 Herrick Road Twinsburg OH (Ohio) 44087-0081 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, (Electrodeposited) - Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. - Limited to steels below 180ksi.
Plating Perceptions Inc PLA14U 8815 Herrick Road Twinsburg OH (Ohio) 44087-0081 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Plating Perceptions Inc PLA14U 8815 Herrick Road Twinsburg OH (Ohio) 44087-0081 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129
Plating Perceptions Inc PLA14U 8815 Herrick Road Twinsburg OH (Ohio) 44087-0081 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-Deposition- Conditional to Annual Operator Qualification. - Conditional to Stress relied and Hydrogen Embrittlement Relied per PSR0129 for embrittling plating conditions. - Specify approved brush deposit and substrate.
Plating Perceptions Inc PLA14U 8815 Herrick Road Twinsburg OH (Ohio) 44087-0081 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement, Electrodepositon- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. - Limited to steel parts below 200ksi unless usage of this process has been specifically approved by engineering authority.
Pneudraulics Inc. PNE05U 8575 Helms Ave. Rancho Cucamonga CA (California) 91730 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Pneudraulics Inc. PNE05U 8575 Helms Ave. Rancho Cucamonga CA (California) 91730 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Design Suppliers
Pneudraulics Inc. PNE05U 8575 Helms Ave. Rancho Cucamonga CA (California) 91730 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Polylab Experts POL04C 450, boul. Industriel Asbestos QC (Quebec) J1T 4X1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Powell Electronics Inc. POW01U 4, Mount Royal Avenue; Suite 210 Marlboro MA (Massachusetts)01752 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-46168 Coating, Aliphatic Polyurethane, Chemical Agent Resistant
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53022 (MIL-P-53022) Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53030 (MIL-P-53030) Primer Coating, Epoxy, Water Based, Lead and Chromate Free
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-53039 (MIL-C-53039) Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO code Number S-749
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
PPI Aerospace PPI01U 23514, Groesbeck Highway Warren MI (Michigan) 48089 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Praxair Surface Technologies PRA01U PO Box 100424 Atlanta GA (Georgia) 30384-0424 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Praxair Surface Technologies PRA01U 1366 Tolland Turnpike Manchester CT (Connecticut) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Praxair Surface Technologies PRA07U 1500 Polco Street Indianapolis IL (illinois) 46222 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0231 Application of HVOF CoatingsCT-Coating H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2447 Coating, Thermal Spray High Velocity Oxygen/ Fuel Process
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0231 Application of HVOF CoatingsCT-Coating A - Approval AMS-2448 Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel Process
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessA - Approval AMS-2449 Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0483 Superfinishing None A - Approval AMS-2452 Superfinishing of HVOF Applied Tungsten Carbide Coatings
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing A - Approval HPS-171 Stripping of Inorganic coatingsConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0173 Cleaning CP-Chemical Processing A - Approval HPS-173 Cleaning of inorganic Coating
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0206 Abrasive Blasting CP-Chemical Processing A - Approval HPS-206 Abrasive BlastingLimited to aluminum oxide and subject technique approved by HD. Aluminum oxyde grit 120
need to be used.Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessA - Approval HPS-230 Grinding and Inspection of HVOF Coatings
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing A - Approval HPS-235 Stripping of WC-Co-Cr HVOF CoatingConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0483 Superfinishing None A - Approval HPS-483 Superfinishing
Praxair Surface Technologier srl. PRA09U Via Fleming 3 Novara Novara (NO) [Piedmont]28100 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Precisions Rings PRE02U 5611, Progress Road, P.O. Box 421189 Indianapolis IN (Indiana) 46242 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Precisions Rings PRE02U 5611, Progress Road, P.O. Box 421189 Indianapolis IN (Indiana) 46242 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Precisions Rings PRE02U 5611, Progress Road, P.O. Box 421189 Indianapolis IN (Indiana) 46242 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Precisions Rings PRE02U 5611, Progress Road, P.O. Box 421189 Indianapolis IN (Indiana) 46242 USA NONE - HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2774 Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts
Precisions Rings PRE02U 5611, Progress Road, P.O. Box 421189 Indianapolis IN (Indiana) 46242 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Precisions Rings PRE02U 5611, Progress Road, P.O. Box 421189 Indianapolis IN (Indiana) 46242 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Precisions Rings PRE02U 5611, Progress Road, P.O. Box 421189 Indianapolis IN (Indiana) 46242 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Precision Coil Spring Company PRE05U 10107, Rose Avenue El Monte CA (California) 91731 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Precision Coil Spring Company PRE05U 10107, Rose Avenue El Monte CA (California) 91731 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Precision Coil springs PRE05U 10107, Rose Avenue El Monte CA (California) 91731 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Precision Coil springs PRE05U 10107, Rose Avenue El Monte CA (California) 91731 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Precision Coil springs PRE05U 10107, Rose Avenue El Monte CA (California) 91731 USA NONE - HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2774 Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 32 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Precision Coil springs PRE05U 10107, Rose Avenue El Monte CA (California) 91731 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Precision Coil springs PRE05U 10107, Rose Avenue El Monte CA (California) 91731 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Precision Metal Products, Inc. PRE06U 850, West Bradley Avenue El Cajon CA (California) 92020 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Precision Metal Products, Inc. PRE06U 850, West Bradley Avenue El Cajon CA (California) 92020 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Precision JRN PRE11C 2291, rue Louis-Veuillot Montreal QC (Quebec) H1N 2N5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers Approbation conditional to audit of processPrecision JRN PRE11C 2291, rue Louis-Veuillot Montreal QC (Quebec) H1N 2N5 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional Approval HPS-182 Grinding of High Strength Steels and of Chrome plate (180,000) Approbation conditional to audit of processPrécision S.F. Tech Inc. PRE13C / PRE13U 1098 rue des Forges Terrebonne QC (Quebec) J6Y 0P6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Précision S.F. Tech Inc. PRE13C / PRE13U 1098 rue des Forges Terrebonne QC (Quebec) J6Y 0P6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Précision S.F. Tech Inc. PRE13C / PRE13U 1098 rue des Forges Terrebonne QC (Quebec) J6Y 0P6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Precision Gear Company PRE14U 1900 Midway Drive Twinsburg OH (Ohio) 44087 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Precision Swaging PRE15U 7012 Motz Street Paramount CA (California) 90723 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Pressco Products PRE16U 22617 85th PL S Kent WA (Washington)98031 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Pressco Products PRE16U 22617 85th PL S Kent WA (Washington)98031 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Precision Grinding Co. (PGC) PRE18U 1019 W. Briardale Ave. Orange CA 92865 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Precision Grinding Co. (PGC) PRE18U 1019 W. Briardale Ave. Orange CA 92865 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Precision Grinding Co. (PGC) PRE18U 1019 W. Briardale Ave. Orange CA 92865 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessC - Conditional Approval HPS-182 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or Over
Precision Grinding Co. (PGC) PRE18U 1019 W. Briardale Ave. Orange CA 92865 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval ISO-9001 Quality Management System - Requirements
Trescal Inc. PRI01C 4407, rue Charleroi Montreal-Nord QC (Quebec) H1H 1T6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Trescal Inc. PRI01C 4407, rue Charleroi Montreal-Nord QC (Quebec) H1H 1T6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the competence of testing and calibration laboratories
Progressive Alloy Steel Unlimited PRO05U 2217, Blvd. Newsome Hwy Hartsville SC (South Carolina)29551 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Progressive Alloy Steel Unlimited PRO05U 2217, Blvd. Newsome Hwy Hartsville SC (South Carolina)29551 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Produits d'Acier Unic / Unic Steel Products PRO26C 425, boul. Guimond Longueuil QC (Quebec) J4G 1L8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Production Paint Stripping (PPS) PRO38C/PRO38U 11-A, McLachlan Dr. Etobicoke ON (Ontario) M9M 1E3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
PSI Bearings PSI01U 2175 Union Place Simi Valley CA (California) 93065 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
PTI Industries Inc. PTI01U 2 Peerless Way Enfield CT (Connecticut) 6082 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
PTI Industries Inc. PTI01U 2 Peerless Way Enfield CT (Connecticut) 6082 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-106 Penetrant Inspection Specify NDT Inspector Levels (2 and/or 3)Pylon Electronics Incorporated PYL01C 147 Colonnade Rd. Ottawa ON (Ontario) K2E 7L9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Pylon Electronics Incorporated PYL01C 147 Colonnade Rd. Ottawa ON (Ontario) K2E 7L9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
QCS Technology Inc. QCS01U 14901 Emery Avenue Cleveland OH (Ohio) 44135 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
QCS Technology Inc. QCS01U 14901 Emery Avenue Cleveland OH (Ohio) 44135 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Q-Lab Corporation QPA01U 800, Canterbury Rd. Westlake OH (Ohio) 44145 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Q-Lab Corporation QPA01U 800, Canterbury Rd. Westlake OH (Ohio) 44145 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
QRP Incorporated QRP01U 2307 Mercantile Dr. N.E. Leland NC 28451 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
Qualitech Associates QUA01U 11324, Brookpark Rd. Cleveland OH (Ohio) 44130 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Qualitech Associates QUA01U 11324, Brookpark Rd. Cleveland OH (Ohio) 44130 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAC-7114/1 Nadcap Audit Criteria for NonDestructive Testing Facility Penetrant Survey
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2772 Heat Treatment of Aluminum Alloy Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6088 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forgings and Castings Quality Systems - Aerospace - Model for Quality Assurance in Design.
Quality Aluminum forge (Sifco) QUA05U 820/794 North Cypress Strut Orange CA (California) 92867 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9110 Quality Maintenance Systems-Aerospace - Requirements
Queloz & Associes Inc. QUE01C 4100, rue Jean-Marchand, Parc Armand ViauQuebec QC (Quebec) G2C 1Y6 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Queloz & Associes Inc. QUE01C 4100, rue Jean-Marchand, Parc Armand ViauQuebec QC (Quebec) G2C 1Y6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Queloz & Associes Inc. QUE01C 4100, rue Jean-Marchand, Parc Armand ViauQuebec QC (Quebec) G2C 1Y6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Queloz & Associes Inc. QUE01C 4100, rue Jean-Marchand, Parc Armand ViauQuebec QC (Quebec) G2C 1Y6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing L - Limited Approval HPS-113 Chemical Film Treament for Aluminium AlloysLimited to type I, class 1A only, by immersion only.
Queloz & Associes Inc. QUE01C 4100, rue Jean-Marchand, Parc Armand ViauQuebec QC (Quebec) G2C 1Y6 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Queloz & Associes Inc. QUE01C 4100, rue Jean-Marchand, Parc Armand ViauQuebec QC (Quebec) G2C 1Y6 Canada PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted Bushings
Queloz & Associes Inc. QUE01C 4100, rue Jean-Marchand, Parc Armand ViauQuebec QC (Quebec) G2C 1Y6 Canada PSR-0212 Installation of Lube Fitting NONE A - Approval HPS-212 Installation of Lube Fitting
Questek Innovations QUE06U 1820, Ridge Rd. Evanston IL (Illinois) 60201 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
RAH Industries RAH01U 4800 Avenue Rockefeller Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related Systems H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
RAH Industries RAH01U 4800 Avenue Rockefeller Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Randolph Products Company RAN01U 33, Haynes Circle Chicopee MA (Massachusetts)01020-3712 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Randack Spezialschrauben RAN08O Delserner Str 148 E Hagen Nordrhein-WestfalenD-58091 Germany PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Randack Spezialschrauben RAN08O Delserner Str 148 E Hagen Nordrhein-WestfalenD-58091 Germany PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-14001 Environmental Management Systems - Requirements with Guidance for use / Systèmes de management environnemental - Exigences et lignes directrices pour son utilisation
Randack Spezialschrauben RAN08O Delserner Str 148 E Hagen Nordrhein-WestfalenD-58091 Germany PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Rapid Precision Eng RAP01O Unit 16 Brickfield Business Liverpool Liverpool England L366HY England PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria For PartsConditional to NDT personnel certification per PSR0310Rapid Precision Eng RAP01O Unit 16 Brickfield Business Liverpool Liverpool England L366HY England PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Rapid Precision Eng RAP01O Unit 16 Brickfield Business Liverpool Liverpool England L366HY England PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Rapid Precision Eng RAP01O Unit 16 Brickfield Business Liverpool Liverpool England L366HY England PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Rapid Precision Eng RAP01O Unit 16 Brickfield Business Liverpool Liverpool England L366HY England PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Rapid Precision Eng RAP01O Unit 16 Brickfield Business Liverpool Liverpool England L366HY England PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Rapid Precision Eng RAP01O Unit 16 Brickfield Business Liverpool Liverpool England L366HY England PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Rapid Precision Eng RAP01O Unit 16 Brickfield Business Liverpool Liverpool England L366HY England PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Ray Precision Threadrolling RAY05U 515 Frederick Street Waukesha WI (Wisconsin) 53187 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 33 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.RBC transport dynamic RBC02U 3131, W. Segerstrom Avenue, P.O.Box 1953 Santa Ana CA (California) 92704-9998 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.RBC Transport Dynamic Inc. RBC02U 3131 W. Segerstrom Ave. Santa Ana CA (California) 92704 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
RBC Transport Dynamic Inc. RBC02U 3131 W. Segerstrom Ave. Santa Ana CA (California) 92704 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Renton Coil Springs REN03U 425, S. 7th Steet Renton WA (Washington)98057-0880 USA PSR-0252 Heat Treatment HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3Heat Treatment Precipitation-
Hardening Corrosion-Resistant and
Maraging Steel Parts
- Conditional to Pyrometry per AMS2750.
- Conditional to techniques approval for parts above 180ksi.
- Specify atmosphere used.
- Conditional to Operator qualification per ARP1962 for straightening operations.
Renton Coil Springs REN03U 425, S. 7th Steet Renton WA (Washington)98057-0880 USA PSR-0258 Heat Treatment HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2801Heat Treatment of Titanium Alloy
Parts
- Conditional to Pyrometry per AMS2750.
- Conditional to Operator qualification per ARP1962 for straightening operations.
Renton Coil Springs REN03U 425, S. 7th Steet Renton WA (Washington)98057-0880 USA PSR-0258 Heat Treatment HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200Heat Treatment of Titanium and
Titanium Alloys
- Conditional to Pyrometry per AMS2750.
- Conditional to Operator qualification per ARP1962 for straightening operations.Renton Coil Springs REN03U 425, S. 7th Steet Renton WA (Washington)98057-0880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Renton Coil Springs REN03U 425, S. 7th Steet Renton WA (Washington)98057-0880 USA PSR-0307 MTL/HT MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18Standard Test Methods for Rockwell
Hardness of Metallic Materials
Renton Coil Springs REN03U 425, S. 7th Steet Renton WA (Washington)98057-0880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Renton Coil Springs REN03U 425, S. 7th Steet Renton WA (Washington)98057-0880 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011Quality Assurance Requirements for
Suppliers with Design Responsability
Renishaw Canada REN05C 2196, Dunwin Dr. Mississauga ON (Ontario) L5L 1C7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
RFM (Resources For Manufacturing) RES08U 7644, McEwen Rd. Dayton OH (Ohio) 45459 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
RFM (Resources For Manufacturing) RES08U 7644, McEwen Rd. Dayton OH (Ohio) 45459 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Rexnord Industries Inc. REX02U 2400 Curtis St. Downers Grove IL (Illinois) 60515 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Rexnord Industries Inc. REX02U 2400 Curtis St. Downers Grove IL (Illinois) 60515 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Rexnord Industries LLC REX02U 2400, Curtiss Street Downers Grove IL (Illinois) 60515-4037 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
REXEL REX05U 18601, Cleveland Parkway Cleveland OH (Ohio) 44111 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Control Products Corporation RHE01U 1513, W. Jefferrson Street Grand Prairie TX (Texas) 75051-1443 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Riepert Salt and Supplies RIE01C 66 Schaefer St. Waterloo ON (Ontario) N2L 4C5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Rimeco Products RIM01U 38198, Willoughby Parkway Willoughby OH (Ohio) 44094 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Rimeco Products RIM01U 38198, Willoughby Parkway Willoughby OH (Ohio) 44094 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
Ring Masters LLC RIN01U 240, 6th Street N.W. Massillon OH (Ohio) 44647 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Riverside Machine & Automation RIV01U 1240, N. Genoa Clay Center Rd Genoa OH (Ohio) 43430 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Mitchell Aerospace Inc. [Robert Mitchell] ROB02C 350, boul. Décarie Saint-Laurent (Montreal) QC (Quebec) H4L 3K5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Mitchell Aerospace Inc. [Robert Mitchell] ROB02C 350, boul. Décarie Saint-Laurent (Montreal) QC (Quebec) H4L 3K5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Mitchell Aerospace Inc. [Robert Mitchell] ROB02C 350, boul. Décarie Saint-Laurent (Montreal) QC (Quebec) H4L 3K5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Robert Stuart Ltd ROB11U 10/11 EDINBURGH WAY ESSEX , CM20 2DH UNITED KINGDOM UNITED KINGDOM PSR-0175 Chromium Plating CP-Chemical Processing A - Approval AMS-2460 Plating Chromium Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129Robert Stuart Ltd ROB11U 10/11 EDINBURGH WAY ESSEX , CM20 2DH UNITED KINGDOM UNITED KINGDOM PSR-0175 Chromium Plating CP-Chemical Processing A - Approval AMS-QQ-C-320, Class 2 Chromium Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129Robert Stuart Ltd ROB11U 10/11 EDINBURGH WAY ESSEX , CM20 2DH UNITED KINGDOM UNITED KINGDOM PSR-0102 Nickel Electro Plating CP-Chemical Processing A - Approval AMS-QQ-N-290, Class 2 Nickel Plating (Electrodeposition ) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Robert Stuart Ltd ROB11U 10/11 EDINBURGH WAY ESSEX , CM20 2DH UNITED KINGDOM UNITED KINGDOM PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Robert Stuart Ltd ROB11U 10/11 EDINBURGH WAY ESSEX , CM20 2DH UNITED KINGDOM UNITED KINGDOM PSR-0102 Nickel Electro Plating CP-Chemical Processing A - Approval QQ-N-290, Class 2 Nickel Plating (Electrodeposition ) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Roller Bearing Company of America [RBC Bearings] ROL02U 400, Sullivan Way West Trenton NJ (New Jersey) 08628 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Roller Bearing Company of America [RBC Bearings] ROL02U 400, Sullivan Way West Trenton NJ (New Jersey) 08628 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Roller Bearing Company of America [RBC Bearings] ROL02U 400, Sullivan Way West Trenton NJ (New Jersey) 08628 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Rose Integration ROS02C / ROS02U 41, Bruce Crescent Carleton ON (Ontario) K7C 3T3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Rose Integration ROS02C / ROS02U 41, Bruce Crescent Carleton ON (Ontario) K7C 3T3 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Rosebank Engineering Pty Ltd ROS03U 836, Mountain Highway Bayswater VIC (Victoria) 03153 Australia PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ryerson Canada RYE01C / RYE01U 200, rue du Cheminot Vaudreuil-Dorion QC (Quebec) J7V 5V5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
S&L Aerospace Metals LLC S&L01U 120-12 28th avenue Flushing NY (New York) 11354 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sargent Controls & Aerospace SAR01U 12818 collection centre Drive Tucson AZ (Arizona) 85743-9453 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sargent Controls & Aerospace SAR01U 12818 collection centre Drive Tucson AZ (Arizona) 85743-9453 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilities
Sensata Technologies SEN01U 529 Pleasant Street Attleboro MA (Massachusetts)02703 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Sensata Technologies SEN01U 529 Pleasant Street Attleboro MA (Massachusetts)02703 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sensata Technologies SEN01U 529 Pleasant Street Attleboro MA (Massachusetts)02703 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Sensordata Technologies Inc. SEN02U 50207 Hayes Rd Shelby Township MI (Michigan) 48315 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Senior Operations LLC SEN03U 1075 Providence Highway Sharon Sharon MA (Massachusetts)02067 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Senior Operations LLC SEN03U 1075 Providence Highway Sharon Sharon MA (Massachusetts)02067 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sermatech Power solutions (d.b.a. Praxair Surface Technologies) SER25C 10300, avenue Ryan Dorval QC (Quebec) H9P 2T7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Sermatech Power solutions (d.b.a. Praxair Surface Technologies) SER25C 10300, avenue Ryan Dorval QC (Quebec) H9P 2T7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sermatech Power solutions (d.b.a. Praxair Surface Technologies) SER25C 10300, avenue Ryan Dorval QC (Quebec) H9P 2T7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Praxair Surface Technologies SER46U 18502 Laurel Pk Rod Compton CA (California) USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sey Tec SEY01U 8825 BLVD Jensen Drive North Richland TX (Texas) 76180 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Sey Tec SEY01U 8825 BLVD Jensen Drive North Richland TX (Texas) 76180 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated PartsConditional to NDT personnel certification per PSR0310SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria For PartsConditional to NDT personnel certification per PSR0310SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR0310
SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR-0310.
SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection- Specify Inspector Level (2 and/or 3).
- Conditional to NDT personnel certification per PSR0310SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR0310SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR0310SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR0310SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR0310SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR0310SGS Canada Inc. SGS01C 3420 Boulevard St-Joseph Est Montreal QC (Quebec) H1X 1W6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR0310Shellcast Foundries Inc. SHE06C 10645, avenue Lamoureux Montreal QC (Quebec) H1G 5L4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Shellcast Foundries Inc. SHE06C 10645, avenue Lamoureux Montreal QC (Quebec) H1G 5L4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Shellcast Foundries Inc. SHE06C 10645, avenue Lamoureux Montreal QC (Quebec) H1G 5L4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forgings and Castings Quality Systems - Aerospace - Model for Quality Assurance in Design.
Shimco North America Inc. SHI01C 75 Heroux Devtek Dr Cambridge ON (Ontario) N3E 0A7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Shimco North America Inc. SHI01C 75 Heroux Devtek Dr Cambridge ON (Ontario) N3E 0A7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Shimco North America Inc. SHI01C 75 Heroux Devtek Dr Cambridge ON (Ontario) N3E 0A7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Shultz Steel Company SHU01U 5321, Firestone Blvd. South Gate CA (California) 90280-3629 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Shultz Steel Company SHU01U 5321, Firestone Blvd. South Gate CA (California) 90280-3629 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Shultz Steel Company SHU01U 5321, Firestone Blvd. South Gate CA (California) 90280-3629 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Shultz Steel Company SHU01U 5321, Firestone Blvd. South Gate CA (California) 90280-3629 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Shur-Lok Company SHU05U 2541 White Road Irvine CA (California) 92614 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Shur-Lok Company SHU05U 2541 White Road Irvine CA (California) 92614 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
A.T.L.A.S Aeronautik (S.I.D.O. Ltée) SID02C 855, rue Vadnais Granby QC (Quebec) J2J 1H8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
A.T.L.A.S Aeronautik (S.I.D.O. Ltée) SID02C 855, rue Vadnais Granby QC (Quebec) J2J 1H8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
A.T.L.A.S Aeronautik (S.I.D.O. Ltée) SID02C 855, rue Vadnais Granby QC (Quebec) J2J 1H8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Sierra Alloys Company SIE01U 5467, Ayon Avenue Irwindale CA (California) 91706 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Sierra Spray Painting Ltd SIE03C 640, Hardwick Road, Unit # 4 Bolton ON (Ontario) L7E 5R1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Sierra Spray Painting Ltd SIE03C 640, Hardwick Road, Unit # 4 Bolton ON (Ontario) L7E 5R1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 34 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Sierra Spray Painting Ltd SIE03C 640, Hardwick Road, Unit # 4 Bolton ON (Ontario) L7E 5R1 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Sierra Spray Painting Ltd SIE03C 640, Hardwick Road, Unit # 4 Bolton ON (Ontario) L7E 5R1 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Sifco ASC (Applied Surface Concepts) SIF01U 5708, E. Schaaf Road Independence OH (Ohio) 44131-1394 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Sifco ASC (Applied Surface Concepts) SIF01U 5708, E. Schaaf Road Independence OH (Ohio) 44131-1394 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sifco ASC (Applied Surface Concepts) SIF01U 5708, E. Schaaf Road Independence OH (Ohio) 44131-1394 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2801 Heat Treatment of Titanium Alloy PartsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Steels; CL-A.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless and PH Stainless Steels; CL-D.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless Steels; CL-C.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Stainless Steels; CL-B.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).SIFCO Forge Group (SIFCO Industries Inc.) SIF02U 970, E. 64th Street Cleveland OH (Ohio) 44103-1694 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval HPS-202 Solid, Film Lubricant, Application Restricted to the application of Lubribond 220 & Everlube 9002Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO Code Number S-749
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel - Conditional to approval of specific and detailled supplier procedure. - Specify method and type used
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels- Conditional to approval of specific and detailled supplier procedure. - Specify method and type used
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant Steels- Conditional to approval of specific and detailled supplier procedure. - Specify method and type used
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems- Conditional to approval of specific and detailled supplier procedure. - Specify method and type used
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts- Conditional to approval of specific and detailled supplier procedure. - Specify method and type used
Signature Aerospace Ltd SIG03C 6190, rue Vanden-Abeele; Saint-Laurent Saint-Laurent (Montreal) QC (Quebec) H4S 1R9 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Treatments for Corrosion-Resistant Steel (Superseded by AMS-QQ-P-35)- Conditional to approval of specific and detailled supplier procedure. - Specify method and type used
Sigco Industries Inc. SIG08C 107, Manitou drive, Unit #16 Kitchener ON (Ontario) N2C 1L4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sinters America Inc. SIN04C 95 Chemin du Tremblay Boucherville QC (Quebec) J4B 7K4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Leonardo Airborne SIR01O Via Della Lama 13 Montevarchi Arezzo Arezzo 52025 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Leonardo Airborne SIR01O Via Della Lama 13 Montevarchi Arezzo Arezzo 52025 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Leonardo Airborne SIR01O Via Della Lama 13 Montevarchi Arezzo Arezzo 52025 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-011 Quality Assurance Requirements for Suppliers with Design
SKF Aerospace (Clevedon, UK) SKF02O 108 Strode Road Clevedon North SommersetBS21 6QQ UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
SKF Aerospace (Clevedon, UK) SKF02O 108 Strode Road Clevedon North SommersetBS21 6QQ UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
SKF Aerospace (Clevedon, UK) SKF02O 108 Strode Road Clevedon North SommersetBS21 6QQ UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
SKF Sealing Solutions SKF02U 900, North State Street Elgin IL (Illinois) 60123-2193 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
SKF Sealing Solutions SKF02U 900, North State Street Elgin IL (Illinois) 60123-2193 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
SKF Sealing Solutions SKF02U 900, North State Street Elgin IL (Illinois) 60123-2193 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Managemetn System - Requirements
Smalley Steel Ring Company SMA01U 555, Oakwood Road Lake Zurich IL (Illinois) 60047 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Smalley Steel Ring Company SMA01U 555, Oakwood Road Lake Zurich IL (Illinois) 60047 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Snowline Aviation SNO01U 4261 Business Drive Cameron Park CA (California) 95682 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Snowline Aviation SNO01U 4261 Business Drive Cameron Park CA (California) 95682 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Snowline Aviation SNO01U 4261 Business Drive Cameron Park CA (California) 95682 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-9001 Quality Management System - Requirements
Solar Atmospheres SOL16U 8606 Live Oak Avenue Fontana CA (California) 92335 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to operator
qualification per ARP-1962 for straightening operations
Solar Atmospheres SOL16U 8606 Live Oak Avenue Fontana CA (California) 92335 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, CLASS A Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI. Specify atmosphere used and quench media used. Conditional to operator
qualification per ARP-1962 for straightening operationsSolar Atmospheres SOL16U 8606 Live Oak Avenue Fontana CA (California) 92335 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Solar Atmospheres SOL16U 8606 Live Oak Avenue Fontana CA (California) 92335 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Solar Atmospheres SOL16U 8606 Live Oak Avenue Fontana CA (California) 92335 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Sonic Ind. - Sargent Aerospace SON02N 20030 S.Normandie Ave Torrance CA (California) 980502 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Sonic Ind. - Sargent Aerospace SON02N 20030 S.Normandie Ave Torrance CA (California) 980502 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0107 Cadmium Plating (Electro-deposited){Bright Cadmium}CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating CadmiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. Limited to steel
parts below 180 ksi
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2403 Plating, Nickel General PurposeConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 35 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2405 Electroless Nickel Plating Low PhosphorusConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Chromium Plating, Hard DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2407 Plating, Chromium, PorousConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2419 Cadmium-Titanium Plating
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2438
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0231 Application of HVOF CoatingsCT-Coating A - Approval AMS-2448 Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel ProcessConditional to approval of specific and detailled supplier procedure. Conditional to
techniques approval.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2449 Grinding of HVOF Sprayed Tungsten Carbide applied to high strength steelsConditional to Techniques approval and acceptance of Barkhausen Noise Inspection by P/N
for First Production Batch.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451 Plating, Brush, General Requirements
- Conditional to Usage with one of the AMS 2451/1 to AMS 2451/13.
- Conditional to Annual Operator Qualification.
- Conditional to Stress relied and Hydrogen Embrittlement Relied per PSR0129 for embrittling
plating conditions.
- Specify approved brush deposit and substrate.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451/4 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
- Conditional to Annual Operator Qualification.
- Conditional to Stress relied and Hydrogen Embrittlement Relied per PSR0129 for embrittling
plating conditions.
- Specify approved brush deposit and substrate.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, ChromiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2469 Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance RequirementsConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2472 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Dyed CoatingConditional to techniques approval.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2473 Chemical Film Treatment for Aluminum Alloys General Purpose CoatingLimited to type I, class 1A only, by immersion only.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2475 Protective Treatments Magnesium Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2480 Phosphate Treatment Paint Base Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2481 Phosphate Treatment Antichafting Conditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0114 Conversion Coatings on Titanium and Titanium AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2486 Conversion Coating of Titanium Alloys Fluoride-Phosphate TypeConditional to approval of specific and detailled supplier procedure.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to NDT personnel certification per ARP 1923 or training per PSR0310.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625, Type II Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Type II.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, ElectrodepositedConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0107 Cadmium Plating (Electro-deposited){Bright Cadmium}CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. Limited to steel
parts below 180 ksiSouthwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B650 Substrates, Ferrous, Electrodeposited Engineering Chromium Coatings onConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant InspectionConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval HPS-118 Temper Etch Inspection Conditional to generic technique approval.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal PartsConditional to clean shot peen per PSR-0187. Limited to automatic and/or computer
monitored shot peening.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-140 Cadmium - Titanium alloy plating Low EmbrittlementConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to steel
parts below 240 KSI unless usage of this process has been specifically approved by
engineering authority.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0175 Chromium Plating CP-Chemical Processing A - Approval HPS-175 Chromium Plating (electrodeposited Low Embritlement)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0231 Application of HVOF CoatingsCT-Coating A - Approval HPS-231 Applications of HVOFConditional to approval of specific and detailled supplier procedure. Conditional to
techniques approval.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-306 Pre-penetrant Etching Limited to Aluminum Alloys.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type I Anodic Coatings for Aluminum and Aluminum Alloys
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type III Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0192 Coating, Metallic - Ceramic CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-81751 Coating, Metallic Ceramic Conditional to approval of specific and detailed supplier procedure.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-8514 Coating Compound, Metal Pretreatment
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0112 Manganese Phosphate on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc BaseConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-16232 Phosphate Coating, Heavy, Manganese or Zinc Base- Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.
- Specify heavy and/or light zinc phosphate is used.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-32119 Coatings, Electroless Nickel, Special applicationsConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Immersion, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum AlloysLimited to type I, class 1A only, by immersion only.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO code Number S-749
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46147 Lubricant, Solid Film, Air Cured, Corrosion Inhibiting
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1500 Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 36 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-DepositionConditional to Annual Operator Qualification. Conditional to stress relief and Hydrogen
Embrittlement Relief per PSR-0129 for embrittling plating conditions.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to NDT personnel certification per ARP 1923 or training per PSR0310.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-868 Nickel Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129. Limited to steel
parts below 220 KSI unless usage of this process has been specifically approved by
engineering authority & conditional to techniques approval for steel parts.
Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0165 Coating, Conversion, Zinc, Phosphate, for Paint Base on SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekTT-C-490 Chemical Conversion Coatings and Pretreatments for Ferrous SurfacesConditional to Stress Relief and Hydrogen Embrittlement relief per PSR-0129.Southwest United Ind Inc. SOU06U 422, S. St-Louis Avenue Tulsa OK (Oklahoma) 74120-3499 USA PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekTT-P-28 Paint, Aluminum, Heat Resisting.
Specline SPE01U 2230, Mouton drive Carson City NV (Nevada) 89706 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Specline SPE01U 2230, Mouton drive Carson City NV (Nevada) 89706 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and HigherConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0268 Carburizing HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/7 Carburizing and Heat Treatment of Carburizing Grade Steel PartsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Steels; CL-A.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless and PH Stainless Steels; CL-D.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Stainless Steels; CL-C.
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Stainless Steels; CL-B.Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Speciality Steel Treating SPE05U 34501, Commerce Dr Fraser MI (Michigan) 48026-1692 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Speciality Steel Treating SPE08U 12 Kripes Road East Granby CT (Connecticut) 06026-0455 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Speciality Steel Treating SPE08U 12 Kripes Road East Granby CT (Connecticut) 06026-0455 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Speciality Steel Treating SPE08U 12 Kripes Road East Granby CT (Connecticut) 06026-0455 USA PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)Conditional to techniques approval for parts above 180 ksi.
Speciality Steel Treating SPE08U 12 Kripes Road East Granby CT (Connecticut) 06026-0455 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Speciality Steel Treating SPE08U 12 Kripes Road East Granby CT (Connecticut) 06026-0455 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Spirol International Corp. SPI02U 321 Remington Road Cuyahoga Falls Ohio 44224 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval LGPVC LGPVC supplier
SSA - Service Steel Aerospace Corp. SSA01U 175 Wetmore S.E. Massillon OH (Ohio) 44646 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Senior Aerospace STE07U 4 Peerless Way Enfield CT (Connecticut) 06082 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Senior Aerospace STE07U 4 Peerless Way Enfield CT (Connecticut) 06082 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Senior Aerospace STE07U 4 Peerless Way Enfield CT (Connecticut) 06082 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Steico Industries Inc. STE08U 1814, Ord Way Oceanside CA (California) 92056-1502 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Steico Industries Inc. STE08U 1814, Ord Way Oceanside CA (California) 92056-1502 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Steico Industries Inc. STE08U 1814, Ord Way Oceanside CA (California) 92056-1502 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Element Material Technologies STO01U 5405 East Schaaf Road Cleveland OH (Ohio) 44131 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Element Material Technologies STO01U 5405 East Schaaf Road Cleveland OH (Ohio) 44131 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-17025 General requirements for the competence of testing and calibration laboratories
Sullivan Precision Metal Finishing SUL02U 995 North Service Road West, Sullivan MO (Missouri) 63080 USA PSR-0114 Conversion Coatings on Titanium and Titanium AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2486 Conversion Coating of Titanium Alloys Fluoride-Phosphate TypeConditional to approval of specific and detailled supplier procedure.Sullivan Precision Metal Finishing SUL02U 995 North Service Road West, Sullivan MO (Missouri) 63080 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Sullivan Precision Metal Finishing SUL02U 995 North Service Road West, Sullivan MO (Missouri) 63080 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard pratice for liquid penetrant Conditional to NDT personnel certification per PSR-0310. Sullivan Precision Metal Finishing SUL02U 995 North Service Road West, Sullivan MO (Missouri) 63080 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Sullivan Precision Metal Finishing SUL02U 995 North Service Road West, Sullivan MO (Missouri) 63080 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval HPS-106 Penetrant Inspection- Specify NDT Inspector Levels (2 and/or 3).
- Conditional to NDT personnel certification per PSR0310SUNNEN Products Co. SUN62U 7910 Manchester rd. St-Louis MO (Missouri) 63143 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Superior Thread Rolling SUP04U 12801, Wenworth Street Arleta CA (California) 91331-4332 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Superior Thread Rolling SUP04U 12801, Wenworth Street Arleta CA (California) 91331-4332 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Superior Thread Rolling SUP04U 12801, Wenworth Street Arleta CA (California) 91331-4332 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2403 Plating, Nickel General PurposeConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Chromium Plating, Hard DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0104 Shot Peening of Metal Parts CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2423 Plating, Nickel, Hard Deposit Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed DepositConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, ChromiumConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0104 Shot Peening of Metal Parts CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290, Class 2 Nickel Plating (electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing A - Approval HPS-102 Nickel Electro PlatingConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0105 Electroless Nickel CP-Chemical Processing A - Approval HPS-105 Electroless Nickel Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing A - Approval HPS-171 Stripping of Inorganic coatingsConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 37 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0175 Chromium Plating CP-Chemical Processing A - Approval HPS-175 Chromium Plating (electrodeposited Low Embritlement)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Limited to chrome plating on low-alloy steels and/or nickel plating & Conditional to
techniques approval.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-868 Nickel Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129. Limited to
nickel plating on Low-alloy steels & Conditional to techniques approval for steel parts.
Superior Plating Co. SUP06U 2, Lacey Place Southport CT (Connecticut) 06890-1241 USA PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid PenetrantConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Limited to pre-penetrant etch, when
required, at an approved supplier to HPS-306 (PSR-0106).Tactair TAC01U 4806, West Taft Road LiverPool NY (New York) 13088-4810 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelAt least Level II.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening, Automatic- Conditional to clean Shot Peen per PSR0187.
- For manual application, conditional to approval of specific and detailed supplier procedure.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2432 Shot Peening, Computer Monitored- Conditional to clean Shot Peen per PSR0187.
- For manual application, conditional to approval of specific and detailed supplier procedure.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel Parts'Conditional to NDT personnel certification per PSR0310Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chromic Acid Process
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2472 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Dyed CoatingConditional to techniques approval.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2473 Chemical Film Treatment for Aluminum Alloys General Purpose Coating- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2474 Chemical Treatment for Aluminum Alloys Low Electrical Resistance Coating- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2475 Protective Treatments Magnesium Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to NDT personnel certification per ARP 1923 or training per PSR0310.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-5541 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal Parts- Conditional to clean Shot Peen per PSR0187.
- For manual application, conditional to approval of specific and detailed supplier procedure.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAN-4179 Qualification and approval of personnel for Non-Destructive TestingMT and PT, Level 2 & 3.Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant Testing'Conditional to NDT personnel certification per PSR0310Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing C - Conditional Approval HPS-106 Penetrant Inspection- Specify NDT Inspector Levels (2 and/or 3).
- Conditional to NDT personnel certification per PSR0310Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodizing of Aluminum AlloysConditional to techniques approval.Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing A - Approval HPS-111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing C - Conditional Approval HPS-113, Brush Chemical Film Treatment for Aluminium Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing C - Conditional Approval HPS-113, Immersion Chemical Film Treatment for Aluminium Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing C - Conditional Approval HPS-118 Temper Etch Inspection Conditional to NDT personnel certification per ARP 1923 or training per PSR0310.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement C - Conditional Approval HPS-126 Shot Peening of Metal Parts- Conditional to clean Shot Peen per PSR0187.
- For manual application, conditional to approval of specific and detailed supplier procedure.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing A - Approval HPS-306 Pre-penetrant Etch prior to Penetrant Inspection
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type I Anodic Coatings for Aluminum and Aluminum Alloys (Superseded by MIL-A-8625)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type II Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, Brush, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, Brush, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, Immersion, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, Immersion, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Brush, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Brush, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Immersion, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 38 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Immersion, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer coatings, high-solids
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings: Epoxy, Waterborne
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-9954 Glass Beads: For Cleaning and Peening- Conditional to clean Shot Peen per PSR0187.
- For manual application, conditional to approval of specific and detailed supplier procedure.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-13165 Shot Peen of Metal Parts- Conditional to clean Shot Peen per PSR0187.
- For manual application, conditional to approval of specific and detailed supplier procedure.
Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and Weldments'Conditional to NDT personnel certification per PSR0310Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to NDT personnel certification per ARP 1923 or training per PSR0310.Taylor Certified Processing TAY02C 101B, Devon Road Brampton ON (Ontario) L6T 5A4 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Avior Integrated Products Inc. (formerly Technimeca Int'l.) TEC01C 380, montée de Liesse Saint-Laurent (Montreal) QC (Quebec) H4T 1N8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Avior Integrated Products Inc. (formerly Technimeca Int'l.) TEC01C 380, montée de Liesse Saint-Laurent (Montreal) QC (Quebec) H4T 1N8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Avior Integrated Products Inc. (formerly Technimeca Int'l.) TEC01C 380, montée de Liesse Saint-Laurent (Montreal) QC (Quebec) H4T 1N8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2400 Plating, CadmiumLimited to steel parts below 200 ksi unless usage of this process has been specifically
approved by engineering authority.
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositLimited to steel parts below 200 ksi unless usage of this process has been specifically
approved by engineering authority.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2404 Electroless Nickel Plating
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2405 Electroless Nickel Plating Low Phosphorus
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Chromium Plating, Hard Deposit
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0138 Zinc-Nickel Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2417 Plating, Zinc-Nickel Alloy
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2419 Cadmium-Titanium Plating
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0104 Shot Peening of Metal Parts CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2423 Plating, Nickel, Hard Deposit
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening, Automatic
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2438 Plating, Chromium Thin, Hard, Dense Deposit
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for Parts
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0231 Application of HVOF CoatingsCT-Coating A - Approval AMS-2447 Coating, Thermal Spray High Velocity Oxygen Fuel Process
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0171 Stripping of Inorganic CoatingCT-Coating A - Approval AMS-2448 Striping of WC-Co-Cr HVOF Coating
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0231 Application of HVOF CoatingsCT-Coating A - Approval AMS-2448 Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel Process
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0482 Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength SteelsCMSP-Conventional Machining as a Special ProcessA - Approval AMS-2449 Grinding
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451 Plating, Brush, General Requirements- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451/4 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0483 Superfinishing None A - Approval AMS-2452 Superfinishing of HVOF Applied Tungsten Carbide Coatings
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessA - Approval AMS-2453 Grinding
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2460 Plating, Chromium
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant Steels
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to pyrometry per PSR-0215.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress Relief of Steel Parts Conditional to pyrometry per PSR-0215.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to pyrometry per PSR-0215.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-26074 Coatings, Electroless Nickel Requirements for
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw Materials Limited TO Stress Relief only.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320 Chromium Plating (Electrodeposited)
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposition )
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant Steels
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant Testing
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle Testing
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing A - Approval HPS-102 Nickel Electro Plating
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0104 Shot Peening of Metal Parts CP-Chemical Processing A - Approval HPS-104 Hard nickel low embrittlement
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0105 Electroless Nickel CP-Chemical Processing A - Approval HPS-105 Electroless Nickel Plating
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval HPS-118 Temper Etch Inspection Conditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal PartsConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment A - Approval HPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to pyrometry per PSR-0215.
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-135 Cadmium Plating low embrittlementLimited to steel parts below 200 ksi unless usage of this process has been specifically
approved by engineering authority.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-140 Cadmium - Titanium alloy plating Low Embrittlement
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing A - Approval HPS-171 Stripping of Inorganic coatingsConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0175 Chromium Plating CP-Chemical Processing A - Approval HPS-175 Chromium Plating (electrodeposited Low Embritlement)
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing A - Approval HPS-180 Brush Plating Electrodeposition- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessA - Approval HPS-182 Grinding
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0187 Acid Cleaning of Aluminum and Aluminum Alloys after Shot PeeningCP-Chemical Processing A - Approval HPS-187 Acid Cleaning of Aluminium and Aluminium Alloys after Shot Peening
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval HPS-202 Solid, Film Lubricant, Application
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0206 Abrasive Blasting CP-Chemical Processing A - Approval HPS-206 Abrasive Blasting Limited to aluminum oxide and/or plastic media.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0215 Pyrometry HT-Heat Treatment A - Approval HPS-215 Pyrometry
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0231 Application of HVOF CoatingsCT-Coating A - Approval HPS-231 Applications of HVOF
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing A - Approval HPS-306 Pre-penetrant Etch of Low Alloy Steels & corrosion resistant steels & aluminum alloys & titanium alloys
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0105 Electroless Nickel CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-26074 Requirements for Coatings, Electroless Nickel
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-83286 Coating, Urethane, Aliphatic Isocyanate, for Aerospace Applications
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid Penetrant
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-L-23398 Lubricand, Solid film, Air Cured, Corrosion inhibiting, NATO Code Number S-479
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46147 Lubricant, Solid Film, Air Cured, Corrosion inhibiting
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165 Shot Peening of Metal PartsConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1500 Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, Electrodeposition
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and Weldments
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and Weldments
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 39 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-Deposition- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessA - Approval MIL-STD-866 Grinding of chrome plated steel and steel Parts Heat Treated to 180,000 PSI or Over
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-867 Temper Etch Inspection Conditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-868 Nickel Plating, Low Embrittlement, Electrodeposition
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionLimited to steel parts below 200 ksi unless usage of this process has been specifically
approved by engineering authority.
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-C-320 Chromium Plating (Electrodeposited)
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290 Nickel Plating (Electrodeposition )
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited)Limited to steel parts below 200 ksi unless usage of this process has been specifically
approved by engineering authority.
Tecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to Techniques approval and acceptance of barkhausen noise inspection P/N for
First Production BatchTecnickrome Aéronautique Inc. TEC02C 12264, rue April Montreal QC (Quebec) H1B 5N5 Canada PSR-0483 Superfinishing None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-483 Superfinishing of HVOF Applied Tungsten Carbide Coatings
Techniprodec Ltée TEC04C 11865, avenue Adolphe Caron Montreal QC (Quebec) H1E6J8 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Techniprodec Ltée TEC04C 11865, avenue Adolphe Caron Montreal QC (Quebec) H1E6J8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Techniprodec Ltée TEC04C 11865, avenue Adolphe Caron Montreal QC (Quebec) H1E6J8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Techniprodec Ltée TEC04C 11865, avenue Adolphe Caron Montreal QC (Quebec) H1E6J8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Techniprodec Ltée TEC04C 11865, avenue Adolphe Caron Montreal QC (Quebec) H1E6J8 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Technical Maintenance Inc. TEC06U 4613 Northeast Pkwy Hilliard OH (Ohio) 43026 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Technical Maintenance Inc. TEC06U 4613 Northeast Pkwy Hilliard OH (Ohio) 43026 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
PCM Innovation (Techfab) TEC10C/TEC10U 171 Marien Montreal-Est QC (Quebec) H1B 5V1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
PCM Innovation (Techfab) TEC10C/TEC10U 171 Marien Montreal-Est QC (Quebec) H1B 5V1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
PCM Innovation (Techfab) TEC10C/TEC10U 171 Marien Montreal-Est QC (Quebec) H1B 5V1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
TECO Precision TEC20C 5841, chemin St-Francois Saint-Laurent (Montreal) QC (Quebec) H4S 1B6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
TECO Precision TEC20C 5841, chemin St-Francois Saint-Laurent (Montreal) QC (Quebec) H4S 1B6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tect Aerospace (Kent) TEC32U 19420, 84th Ave. S. Kent WA (washington)98032 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Tect Aerospace (Kent) TEC32U 19420, 84th Ave. S. Kent WA (washington)98032 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tect Aerospace (Kent) TEC32U 19420, 84th Ave. S. Kent WA (washington)98032 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-9001 Quality Management System - Requirements
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2401 Plating, Cadmium, Low Hydrogen Content DepositConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2403 Plating, Nickel General Purpose Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2406 Chromium Plating, Hard Deposit Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2424 Plating, Nickel Low-Stressed Deposit Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening, AutomaticConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2432 Shot Peening, Computer MonitoredConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0175 Chromium Plating CP-Chemical Processing A - Approval AMS-2438 Plating, Chromium Thin, Hard, Dense Deposit
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2442 Magnetic Particle Acceptance Criteria for PartsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2451/1 Plating, Brush, Nickel General Purpose- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0482 Low stress grinding of steel parts heat treated 180 ksi or over and low stress grinding of chrome plating applied to CMSP-Conventional Machining as a Special ProcessL - Limited Approval AMS-2453 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0175 Chromium Plating CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-2460 Plating, Chromium Class 2 only Subject to Techniques Approval when required.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2469 Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance RequirementsConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2649 Etch Inspection of High Strength Steel PartsConditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum Alloys
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-C-320 Chromium Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-N-290 Nickel Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-416 Plating Cadmium, Electrodeposited Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-S-13165 Shot Peening of Metal PartsConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing A - Approval HPS-102 Nickel Electro Plating Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR-0310. Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing A - Approval HPS-111 Chromic Acid Anodizing of Aluminium Alloys
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing L - Limited Approval HPS-113 Chemical Film Treament for Aluminium Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval HPS-118 Temper Etch Inspection Conditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal PartsConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing A - Approval HPS-135 Cadmium Plating low embrittlement Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing A - Approval HPS-143 Hard Anodize of Aluminium alloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing L - Limited Approval HPS-171 Stripping of Inorganic coatingsConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0175 Chromium Plating CP-Chemical Processing A - Approval HPS-175 Chromium Plating (electrodeposited Low Embritlement)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing L - Limited Approval HPS-180 Brush Plating Electrodeposition- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessL - Limited Approval HPS-182 GrindingConditional to Techniques approval and, for low alloy steels heat treated above 180ksi, when
required, acceptance of Barkhausen Noise Inspection by P/N for First Production Batch.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0187 Acid Cleaning of Aluminum and Aluminum Alloys after Shot PeeningCP-Chemical Processing A - Approval HPS-187 Acid Cleaning of Aluminium and Aluminium Alloys after Shot PeeningConditional to approval of specific and detailled supplier procedure.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0206 Abrasive Blasting CP-Chemical Processing A - Approval HPS-206 Abrasive BlastingLimited to aluminum oxide and subject technique approved by HD. Aluminum oxyde grit 120
need to be used.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 40 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum Alloys
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625 Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-S-13165
Conditional to clean Shot peen per
PSR0187. For manual application,
conditional to approval of specific
adn detailed supplier procedure.
Conditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1501 Chromium Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0180 Brush Plating ElectrodepositionCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-865 Selective Brush Plating, Electro-Deposition- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-868 Nickel Plating, Low Embrittlement, ElectrodepositionConditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-870 Cadmium Plating, Low Embrittlement ElectrodepositionConditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0175 Chromium Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-C-320 Chromium Plating (Electrodeposited) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0102 Nickel Electro Plating CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-N-290 Nickel Plating (Electrodeposition ) Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0135 Cadmium Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-416 Plating, Cadmium (Electrodeposited) Conditional to Stress Relief and Hydrogen embrittlement relief per PSR-0129.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR0215.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0140 Cadmium - Titanium Alloy Plating Low EmbrittlementCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-140 Cadmium - Titanium alloy plating Low Embrittlement
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0173 Cleaning CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-173 Cleaning
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-215 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0231 Application of HVOF CoatingsCT-Coating A - Approval HPS-231 Applications of HVOFConditional to approval of specific and detailled supplier procedure. Conditional to
techniques approval.Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0305 H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-119 Barkausen Noise Inspection
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0483 Superfinishing None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-483 Superfinishing of HVOF Applied Tungsten Carbide Coatings
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0231 Application of HVOF CoatingsCT-Coating H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2447 Coating, Thermal Spray High Velocity Oxygen Fuel ProcessConditional to approval of specific and detailled supplier procedure. Conditional to
techniques approval.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0231 Application of HVOF CoatingsCT-Coating H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2448 Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel ProcessConditional to approval of specific and detailled supplier procedure. Conditional to
techniques approval.
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2449 Grinding of HVOF sprayed Tungsten Carbide Coatings Applied to High Strength SteelsConditional to techniques approval and acceptance of Barkhausen Noise Inspection by P/N
for First Production BatchTekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0483 Superfinishing NONE H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2452 Superfinishing of HVOF applied Tungsten Carbide Coatings
Tekalia Aeronautik TEK03C 3900, boul. Tricentenaire Montreal QC (Quebec) H1B 5L6 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress relief of Steel Parts Conditional to Pyrometry per PSR0215.
Tempo Aerospace Inc. TEM01C 205, Fenmar Dr. Toronto ON (Ontario) M9L 2X4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tempo Aerospace Inc. TEM01C 205, Fenmar Dr. Toronto ON (Ontario) M9L 2X4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Tensile Testing Metallurgical Laboratory TEN01U 4520 Willow Parkway Cleveland OH (Ohio) 44125 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tensile Testing Metallurgical Laboratory TEN01U 4520 Willow Parkway Cleveland OH (Ohio) 44125 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Texstars Inc. TEX04U 802 Avenue J. East Grand Prairies TX (Texas) 76011 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Texstars Inc. TEX04U 802 Avenue J. East Grand Prairies TX (Texas) 76011 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Texstars Inc. TEX04U 802 Avenue J. East Grand Prairies TX (Texas) 76011 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemL - For Limited Approval HPS-010 Quality Assurance Requirements for Suppliers
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemL - For Limited Approval AS 9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT L - For Limited Approval AMS 2759 Heat Treatment of Steel Parts, General Requirements- Conditional to usage with AMS2759/9 and/or AMS2759/11. - Conditional to Pyrometry per
PSR0215. - Restriction: Not approved to HT Designated parts per MP-107
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT L - For Limited Approval AMS 2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to Pyrometry per PSR0215.
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0129 Stress Relief and Hydrogen Embrittlement ReliefCP/HT L - For Limited Approval AMS 2759/11 Stress Relief of Steel PartsConditional to Pyrometry per PSR0215. - Restriction: Not approved to HT Designated parts per
MP-107
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsL - For Limited Approval AMS 2759 Heat Treatment of Steel Parts, General Requirements- Conditional to Pyrometry per AMS2750. - Conditional to techniques approval for parts
above 180ksi. - Furnaces Nadcap approved only. - No straightening operations. - Restriction:
Not approved to HT Designated parts per MP-107
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0251 Heat Treatment of Low Alloy SteelsHeat Treatment of Low Alloy SteelsL - For Limited Approval AMS 2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)- Conditional to Pyrometry per AMS2750. - Conditional to techniques approval for parts
above 180ksi. - Furnaces Nadcap approved only. - No straightening operations.- Restriction:
Not approved to HT Designated parts per MP-107
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment L - For Limited Approval AMS 2759 Heat Treatment of Steel Parts, General Requirements- Conditional to Pyrometry per AMS2750. - Conditional to techniques approval for parts
above 180ksi.(REF.HPS-010). - Furnaces Nadcap approved only.
- No straightening operations. - Restriction: Not approved to HT Designated parts per MP-107
Thermetco THE24C 217 boul. Industriel, Châteauguay QC (Quebec) J6J 4Z2 Canada PSR0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment L - For Limited Approval AMS 2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts- Conditional to Pyrometry per AMS2750.- Conditional to techniques approval for parts above
180ksi (REF.HPS-010).- Furnaces Nadcap approved only.
- No straightening operations.- Restriction: Not approved to HT Designated parts per MP-107
Thomas Instrument THO02U 3440 1ST ST BROOKSHIRE TX (Texas) 77423 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Thomas Instrument THO02U 3440 1ST ST BROOKSHIRE TX (Texas) 77423 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Thyssenkrupp Matériaux NA THY01C / THY01U 4700, chemin du Bois Franc; Saint-LaurentSaint-Laurent (Montreal) QC (Quebec) H4S 1A7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Thyssenkrupp Matériaux NA THY01C / THY01U 4700, chemin du Bois Franc; Saint-LaurentSaint-Laurent (Montreal) QC (Quebec) H4S 1A7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
TIMET SAVOIE S.A. TIM05O 62 avenue Paul Girod Ugine France PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
Tiodize TIO01U 15701 Industry Lane Huntington Beach CA (California) 92649 USA PSR-0115 Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or HigherCP-Chemical Processing A - Approval AMS-2488 Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher Type II
Conditional to approval of specific and detailled supplier procedure. Speciy type used (1 as a
coating to elevated temperature forming. 2 as in anti-galling coating or as pretreatment to
improving adherence of film lubricants) and in application where increased resistance to
galvanic corrosion is required.Tiodize TIO01U 15701 Industry Lane Huntington Beach CA (California) 92649 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Tiodize TIO01U 15701 Industry Lane Huntington Beach CA (California) 92649 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Titan Spring Inc. TIT03U 11679N Warren St. Hayden Idaho 83835 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Titan Spring Inc. TIT03U 11679N Warren St. Hayden Idaho 83835 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Timet-North Amerian Service Centers TIT04U 1250 Interstate Drive Wentzville Missouri 63385 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval AS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Timet-North Amerian Service Centers TIT04U 1250 Interstate Drive Wentzville Missouri 63385 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
TLK Dba Thomas CNC Machining TLK01U 23650, Via Del Rio Yorba Linda CA (California) 92887 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
TLK Dba Thomas CNC Machining TLK01U 23650, Via Del Rio Yorba Linda CA (California) 92887 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625, Type I Anodic Coatings for Aluminum and Aluminum Alloys
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625, Type II Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 41 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard pratice for liquid penetrant
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard pratice for Magnetic Particle Testing
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR-0310. TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing A - Approval HPS-111 Chromic Acid Anodizing of Aluminium Alloys
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113, Brush Chemical Film Treament for Aluminium Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113, Immersion Chemical Film Treament for Aluminium Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing C - Conditional Approval HPS-117 Magnetic Particle Inspection Conditional to a process AuditTNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment A - Approval HPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to pyrometry per PSR-0215.TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0187 Acid Cleaning of Aluminum and Aluminum Alloys after Shot PeeningCP-Chemical Processing L - Limited Approval HPS-187 Acid Cleaning of Aluminium and Aluminium Alloys after Shot Peening Flow Chart # 1 Method A OnlyTNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel Conditional to approval of specific and detailled supplier procedure.TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP - Chemical Processes A - Approval HPS-306 Pre-penetrant etch on aluminum Alloys
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type I Anodic Coatings for Aluminum and Aluminum Alloys
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type II Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum Alloys - Approved by Type I, Class 1A with Alodine 1200S only.TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP - Chemical Processes H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46147 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings, Epoxy, Waterborne
TNM Anodizing & Paint TNM01C 21, chemin de l'Aviation; Pointe-Claire Pointe-Claire (Montreal) QC (Quebec) H9R 4Z2 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.Total Lubrifiants Canada Inc. TOT03C 220, avenue Lafleur Ville LaSalle QC (Quebec) H8R 4C9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Trelleborg Sealing Solutions TRE07U 43 Voyager Ct N. Toronto ON (Ontario) M9W 4Y2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Trelleborg Sealing Solutions TRE07U 43 Voyager Ct N. Toronto ON (Ontario) M9W 4Y2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
Trelleborg Sealing Solutions TRE07U 43 Voyager Ct N. Toronto ON (Ontario) M9W 4Y2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Trelleborg Sealing Solutions TRE12U 3400 e Coliseum Blvd Ste 300 Fort Wayne IN 46805 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Trikon Technologies Inc. TRI01C 389, rue Joseph Carrier; Porte No.6 Vaudreuil-Dorion QC (Quebec) J7V 5V5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Trikon Technologies Inc. TRI01C 389, rue Joseph Carrier; Porte No.6 Vaudreuil-Dorion QC (Quebec) J7V 5V5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Tri-Tec Manufacturing TRI02U 6915, South 234th Street Kent WA (Washington)98032-2920 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Triumph Gear Systems Inc. TRI06U 6125, Silver Creek Drive Park City UT (Utah) 84098-6242 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Triumph Gear Systems Inc. TRI06U 6125, Silver Creek Drive Park City UT (Utah) 84098-6242 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Triumph Gear Systems Inc. TRI06U 6125, Silver Creek Drive Park City UT (Utah) 84098-6242 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Triumph Actuation Systems -Connecticut LLC TRI09U 175 Addison Road Windsor CT (Connecticut) 08095 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Triumph Actuation Systems -Connecticut LLC TRI09U 175 Addison Road Windsor CT (Connecticut) 08095 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Triumph Actuation Systems -Clemmons TRI11U 4520, Hampton Road Clemmons NC (North Carolina)27012-9456 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Triumph Actuation Systems -Clemmons TRI11U 4520, Hampton Road Clemmons NC (North Carolina)27012-9456 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Triumph Actuation Systems -Clemmons TRI11U 4520, Hampton Road Clemmons NC (North Carolina)27012-9456 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-011 Quality Assurance Requirements for Suppliers with Design Responsabilities
Triumph Actuation Systems -Clemmons TRI11U 4520, Hampton Road Clemmons NC (North Carolina)27012-9456 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Desch (Trio Tech Inc.) TRI14C 6490, Van Deemter Court Mississauga ON (Ontario) L5T 1S1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Desch (Trio Tech Inc.) TRI14C 6490, Van Deemter Court Mississauga ON (Ontario) L5T 1S1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Desch (Trio Tech Inc.) TRI14C 6490, Van Deemter Court Mississauga ON (Ontario) L5T 1S1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
Desch (Trio Tech Inc.) TRI14C 6490, Van Deemter Court Mississauga ON (Ontario) L5T 1S1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Trinity Aero TRI16U 1935w. Walker st. Wichita KS (Kansas) 67213 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Trinity Aero TRI16U 1935w. Walker st. Wichita KS (Kansas) 67213 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tube-Fab TUB02C 1020 Brevik Place # 11 Mississauga ON (Ontario) L4W 4N7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Tube-Fab TUB02C 1020 Brevik Place # 11 Mississauga ON (Ontario) L4W 4N7 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Tube-Fab TUB02C 1020 Brevik Place # 11 Mississauga ON (Ontario) L4W 4N7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Tube-Fab TUB02C 1020 Brevik Place # 11 Mississauga ON (Ontario) L4W 4N7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Tube-Fab TUB02C 1020 Brevik Place # 11 Mississauga ON (Ontario) L4W 4N7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsMIL-DTL-5541 (MIL-C-5541 / AMS-C-5541)Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
TECT-Power TUR04U 23555 Euclid Avenue Cleveland Ohio 44117 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
TW Metals Inc. TWM01U 1 Wright Avenue Leroy NY (New York) 14482 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
TW Metals Inc. TWM01U 1 Wright Avenue Leroy NY (New York) 14482 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Uba Inc. (Groupe Somavrac) UBA01C 2605, Royal Windsor Drive Mississauga ON (Ontario) L5J 1K9 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Uline ULI60U 2105, S. Lakeside Drive Waukegan IL (Illinois) 60085 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ulrich Metrology Inc. ULR01C 9912, chemin Côte-de-Liesse Lachine QC (Quebec) HST 1A1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ulrich Metrology Inc. ULR01C 9912, chemin Côte-de-Liesse Lachine QC (Quebec) HST 1A1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General Requirements for the Competence of Testing and Calibration Laboratories
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR-0310. Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2470 Anodic Treatment of Aluminum Alloys, Chrome Acid Process
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2471 Anodic Treatment for Aluminum Alloys Sulfuric Acid Process, Undyed CoatingConditional to techniques approval.
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2473 Chemical Film Treatment for Aluminum Alloys General Purpose Coating- Conditional to Annual Operator Qualification for Brush Operation
- Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625, Type I Anodic Coatings for Aluminum and Aluminum Alloys (Superseded by MIL-A-8625)
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0110 Quality Assurance Systems and Related SystemsCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-A-8625, Type II Anodic Coatings for Aluminum and Aluminum Alloys (Superseded by MIL-A-8625)Conditional to techniques approval.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-C-5541 Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant SteelsConditional to approval of specific and detailled supplier procedure.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A380 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsConditional to approval of specific and detailled supplier procedure.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel PartsConditional to approval of specific and detailled supplier procedure.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310. Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0317 Magnetic particle inspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR0310
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR-0310. Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval HPS-110 Sulfuric Acid Anodize Conditional to techniques approval.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing A - Approval HPS-111 Chromic Acid Anodizing of Aluminium Alloys
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-113, Brush Chemical Film treatment for Aluminium alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsHPS-113, Immersion Chemical Film treatment for Aluminium alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0317 Magnetic particle inspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection - Specify Inspector Level (2 and/or 3). - Conditional to NDT personnel certification per PSR0310
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-143 Hard Anodize of Aluminium alloysConditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing A - Approval HPS-190 Chemical Passivation of Stainless Steel
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval HPS-202 Solid Film Lubricant Application
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0211 Application of Wet Wipe PrimerCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing A - Approval HPS-306 Pre-penetrant Etching of low alloy steels
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0111 Chromic Acid Anodizing of Aluminum and Aluminium Alloys CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type I Anodic Coatings for Aluminum and Aluminum Alloys
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type II Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0143 Hard Anodizing of Aluminum AlloysCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-A-8625, Type III Anodic Coatings for Aluminum and Aluminum Alloys (SUPERSEDED BY MIL-A 8625)Conditional to techniques approval. Conditional to approval of specific and detailled supplier
procedure.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, Brush, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, Brush, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-C-5541, IMMERSION, CLASS 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Brush, Class 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, Brush, Class 3 Chemical Conversion Coatings on Aluminum and Aluminum Alloys
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 42 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-DTL-5541, IMMERSION, CLASS 1A Chemical Conversion Coatings on Aluminum and Aluminum Alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-F-18264 Finishes Organic, Weapons Systems, Application & Control of
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0317 Magnetic particle inspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6868 Inspection Process, Magnetic Particle
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-22750 (MIL-C-22750) Coating, Epoxy, High Solids
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0170 General Requirements for PaintingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-85582 (MIL-P-85582) Primer Coatings : Epoxy, Waterborne
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0317 Magnetic particle inspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle Soundness
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0317 Magnetic particle inspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1949 Inspection, Magnetic Particle
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310.
Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0171 Stripping of Inorganic CoatingCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-871 Electro-Chemical Stripping of Inorganic FinishesConditional to stress relief and hydrogen embrittlement relief per PSR-0129 for
embrittlement strippers. Conditional to approval of stripping solutions and any subsequent
change.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing A - Approval NAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Ultraspec Inc. ULT01C 2600, rue de Miniac Saint-Laurent (Montreal) QC (Quebec) H4S 1L7 Canada PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekQQ-P-35 Passivation Conditional to approval of specific and detailled supplier procedure.United Metal Fabricators Inc. UNI13U 14301, South Industrial Avenue Maple Heights OH (Ohio) 44137 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
United Metal Fabricators Inc. UNI13U 14301, South Industrial Avenue Maple Heights OH (Ohio) 44137 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
United Springs Ltd UNI21O Mandale Park, Norman Road Rochdale Lancashire OL11 4HP UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
United Springs Ltd UNI21O Mandale Park, Norman Road Rochdale Lancashire OL11 4HP UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
United Springs Ltd UNI21O Mandale Park, Norman Road Rochdale Lancashire OL11 4HP UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-14001 Environmental Management Systems - Requirements with Guidance for use / Systèmes de management environnemental - Exigences et lignes directrices pour son utilisation
United Springs Ltd UNI21O Mandale Park, Norman Road Rochdale Lancashire OL11 4HP UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Usinage Netur Ltée USI01C 3460, rue Richelieu Saint-Hubert QC (Quebec) J3Y 7B1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Usinage Netur Ltée USI01C 3460, rue Richelieu Saint-Hubert QC (Quebec) J3Y 7B1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Outillage & Usinage B.C. USI05C 9220, Robert-Armour Montreal QC (Quebec) H1E 2H1 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Usinage Feeley (Services RQC) USI11C 639, rue Laurent Granby QC (Quebec) J2G 8P4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Usinage Feeley (Services RQC) USI11C 639, rue Laurent Granby QC (Quebec) J2G 8P4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Usinage Feeley (Services RQC) USI11C 639, rue Laurent Granby QC (Quebec) J2G 8P4 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
UTC Aerospace Systems - dba Goodrich Landing Gear UTC02U 1400 South Service Rd Oakville ON (Ontario) L6L 5Y7 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and Higher
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion-Resistant Steel Parts- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0269 Nitriding HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/6 Gas Nitriding and Heat Treatment of Low-Alloy Steel PartsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in Vacuum - Conditional to Pyrometry per AMS2750. - Conditional to techniques approval for parts above 180ksi. - Specify atmosphere used and quench media used. - Conditional to Operator qualification per ARP1962 for straightening operations.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0258 Heat Treatment of Aluminum AlloysHT-Heat Treatment A - Approval AMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2770 Heat Treatment of Wrought Aluminum Alloy PartsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2771 Heat Treatment of Aluminum Alloy CastingsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0258 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2801 Heat Treatment of Titanium Alloy PartsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6088 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class D Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw Materials - Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel, Raw Materials- Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0258 Heat Treatment of Aluminum AlloysHT-Heat Treatment A - Approval AMS-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment A - Approval HPS-122 Cold stabilization of ferrous alloyrs - Conditional to Pyrometry per AMS 2750. - Conditional to Operator qualification per ARP1962 for straightening operations. - Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment A - Approval HPS-216 Heat Treatment of Corrosion - Resistant SteelConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, Class D Heat Treatment of Corrosion - Resistant SteelConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-129 Stress Relief and Hydrogen Embrittlement Relief- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/11 Stress Relief of Steel Parts - Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General Requirements- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels Parts- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Vac Aéro International Inc. VAC04C 7450, rue Vérité Saint-Laurent (Montreal) QC (Quebec) H4S 1C5 Canada PSR-0129 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875 Heat Treatment of Steel, Raw Materials- Limited to Stress Relief only. - Conditional to Pyrometry per PSR0215.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759 Heat Treatment of Steel Parts, General RequirementsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/1 Heat Treatment of Carbon and Low Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 Mpa)
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 KSI (1517 Mpa) and Higher
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/3 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/4 Heat Treatment Austenitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2759/5 Heat Treatment Martensitic Corrosion Resistant Steel PartsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2801 Heat Treatment of Titanium Alloy PartsConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0251 Heat Treatment of Low Alloy SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 43 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875 Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Vac Aéro International Inc. VAC05C 1371, Speers Road Oakville ON (Ontario) L6L 2X5 Canada PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment A - Approval HPS-216 Heat Treatment of Corrosion - Resistant SteelConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.Vac Aéro International Inc. VAC06C 1366, rue Newton Boucherville QC (Quebec) J4B 5H2 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Vac Aéro International Inc. VAC06C 1366, rue Newton Boucherville QC (Quebec) J4B 5H2 Canada PSR-0232 Flame Spray CT-Coating H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-869 Flame Spraying Conditional to approval of specific and detailed supplier procedure.Vahl Inc. VAH01U 34 Kennedy Blvd East Brunswick NJ (New Jersey) 08816 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Vahl Inc. VAH01U 34 Kennedy Blvd East Brunswick NJ (New Jersey) 08816 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Vahl Inc. VAH01U 34 Kennedy Blvd East Brunswick NJ (New Jersey) 08816 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Vandergriff Technologies VEN02U 4209 Murray Ave. Ft Worth TX (Texas) 76117 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing C - Conditional Approval AMS-STD-2154 Inspection, Ultrasonic, Wrought Metals, Process for Conditional to NDT personnel certification per PSR0310Vandergriff Technologies VEN02U 4209 Murray Ave. Ft Worth TX (Texas) 76117 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B594 Aluminum Alloy Wrought Products for Aerospace Applications, Ultrasonic Inspection ofConditional to NDT personnel certification per PSR0310Vandergriff Technologies VEN02U 4209 Murray Ave. Ft Worth TX (Texas) 76117 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing C - Conditional Approval ASTM-E2375 Standard Practice for Ultrasonic Testing of Wrought Products Conditional to NDT personnel certification per PSR0310Vandergriff Technologies VEN02U 4209 Murray Ave. Ft Worth TX (Texas) 76117 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Vandergriff Technologies VEN02U 4209 Murray Ave. Ft Worth TX (Texas) 76117 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing C - Conditional Approval MIL-STD-2154 Inspection, Ultrasonic, Wrought Metals, Process for Conditional to NDT personnel certification per PSR0310Verify Inc. VER04U 2525 Main St., Suite 100 Irvine CA (California) 92614 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Vital Signs VIT01O Unit 2 Oldens Lane Ind est. Stonedale rd. Stonehouse Gloucestershire GL103RQ UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Vital Signs VIT01O Unit 2 Oldens Lane Ind est. Stonedale rd. Stonehouse Gloucestershire GL103RQ UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening, AutomaticConditional to clean shot peen per PSR0187. For manual application conditional to approval of
specific and detailed supplier procedure
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessA - Approval AMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to Techniques approval and acceptance of barkhausen noise inspection P/N for
First Production BatchV. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval AMS-2649 Etch Inspection of High Strength Steel PartsConditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0190 Chemical Passivation of Stainless SteelCP-Chemical Processing H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2700 Passivation of Corrosion Resistant SteelsConditional to approval of specific and detailled supplier procedure.V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment A - Approval AMS-2759/11 Stress Relief of Steel Parts Conditional to pyrometry per PSR-0215.V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment A - Approval AMS-2759/9 Hydrogen Embrittlement Relief (Baking) of Steels PartsConditional to pyrometry per PSR-0215.
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0107 Cadmium Plating (Electro-deposited){Bright Cadmium}CP-Chemical Processing H(L) - Approval or Accreditation by Third Party recognized by HD with LimitationsAMS-QQ-P-416 Plating Cadmium, (Electrodeposited)Conditional to Stress Relief and Hydrogen Embrittlement Relief per PSR0129. Limited to steel
parts below 180 ksiV. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard pratice for liquid penetrant Conditional to NDT personnel certification per PSR-0310.
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval ASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-020 Digital Product Definition / Model Based Definition
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval HPS-106 Penetrant Inspection Conditional to NDT personnel certification per PSR-0310. V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-110 Sulfuric Acid Anodizing of Aluminum AlloysConditional to Techniques approval.
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0113 Chemical Film treatment for AluminiumCP-Chemical Processing A - Approval HPS-113, Brush Chemical Film treatment for Aluminium alloys- Conditional to Annual Operator Qualification for Brush Operation - Specify method used (immersion and/or brush) and type used (I: with Cr6+, II: without Cr6+)
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval HPS-117 Magnetic Particle Inspection Conditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement A - Approval HPS-126 Shot Peening of Metal PartsConditional to clean Shot peen per PSR0187. For manual application, conditional to approval
of specific adn detailed supplier procedure.V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0129 Stress Relief and Hydrogen Embrittlement ReliefHT-Heat Treatment A - Approval HPS-129 Stress relief and Hydrogen Embrittlement ReliefConditional to Pyrometry per PSR0215.
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval HPS-170 General Requirements for Painting
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0173 Cleaning CP-Chemical Processing A - Approval HPS-173 Cleaning
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0482 Grinding of High Strength Steels and of Chrome Plate (180,000 PSI and Over)CMSP-Conventional Machining as a Special ProcessA - Approval HPS-182 Grinding of High Strength Steels and of Chrome plate (180,000 PSI and over)Conditional to Techniques approval and acceptance of barkhausen noise inspection P/N for
First Production BatchV. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing A - Approval HPS-202 Solid Film Lubricant Application
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0206 Abrasive Blasting CP-Chemical Processing A - Approval HPS-206 Abrasive BlastingLimited to aluminum oxide and subject technique approved by HD. Aluminum oxyde grit 120
need to be used.V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0210 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsNONE A - Approval HPS-210 Installation and Sealing of Temperature Differential Shrink-Fitted Bushings
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0211 Installation and Sealing of Temperature Differential Shrink-Fitted BushingsCP-Chemical Processing A - Approval HPS-211 Application of Wet Wipe Primer
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0212 Installation of Lube Fitting NONE A - Approval HPS-212 Installation of Lube Fitting
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0213 Staking Procedure NONE A - Approval HPS-213 Staking Procedure
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0214 Spherical bearing installation by roller SwageNONE A - Approval HPS-214 Spherical Bearing Installation by Roller Swage
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0106 Pre-penetrant Etch prior to Penetrant InspectionCP-Chemical Processing A - Approval HPS-306 Pre-Penetrant etch of corrosion resistant steelsConditional to approval of detailed supplier procedureV. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0110 Sulfuric Acid Anodize CP-Chemical Processing A - Approval MIL-A-8625, Type II Anodic Coatings for Aluminum and Aluminum AlloysConditional to techniques approval.V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval MIL-PRF-23377 (MIL-P-23377) Primer Coatings: Epoxy, High-Solids
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0202 Solid, Film Lubricant, ApplicationCP-Chemical Processing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0170 General Requirements for PaintingCP-Chemical Processing A - Approval MIL-PRF-85285 (MIL-C-85285) Coating: Polyurethane, Aircraft and Support Equipment
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing A - Approval MIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0306 Penetrant Inspection NDT-Non Destructive Testing A - Approval MIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR-0310. V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0318 Temper Etch Inspection CP-Chemical Processing A - Approval MIL-STD-867 Temper Etch Inspection Conditional to NDTpersonnel certificaiton per ARP1923 or training per PSR0310.V. La Gatta S.r.l. VLA01U Via Ex Aeroporto, Pomigliano d'arco Napoli Napoli (NA) [Campania]80038 Italy PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing A - Approval NAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Voss Industries Inc. VOS01U 2168 West 25th Street Cleveland OH (Ohio) 44113-4172 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Voss Industries Inc. VOS01U 2168 West 25th Street Cleveland OH (Ohio) 44113-4172 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200 Heat Treatment of Titanium and Titanium Alloys- Conditional to Pyrometry per AMS2750.- Conditional to Operator qualification per ARP1962
for straightening operations.VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-STD-2154 Inspection, Ultrasonic, Wrought Metals, Process for Conditional to NDT personnel certification per PSR0310VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR0310VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0528 Fracture Toughness MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E399 Plane-Strain Fracture Toughness of Metallic MaterialsConditional to DQR (Die Qualification Report) approal for each part number.VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forgings and Castings- Conditional to physical Audit
VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-81200 Heat Treatment of Titanium and Titanium Alloys- Conditional to Pyrometry per AMS2750.- Conditional to Operator qualification per ARP1962
for straightening operations.VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-2154 Inspection, Ultrasonic, Wrought Metals, Process for Conditional to NDT personnel certification per PSR0310VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0310 Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3VSMPO - Avisma Corporation VSM01U 401, Riverport Drive Leetsdale PA (Pennsylvania)15056 USA PSR-0718 Forging Titanium Alloy none H(C) - Conditional Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekPSR-0718 Forging, Titanium Alloy Conditional on DQR (Die Qualification Report) approval for each part numberW&G Machine W&G01U 4 Hamden Park Drive Hamden CT (Connecticut) 06517 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
W&G Machine W&G01U 4 Hamden Park Drive Hamden CT (Connecticut) 06517 USA PSR-0301 Dimensional Inspection NONE A - Approval Dimensional Inspection Dimensional Inspection
W&G Machine W&G01U 4 Hamden Park Drive Hamden CT (Connecticut) 06517 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
W&G Machine W&G01U 4 Hamden Park Drive Hamden CT (Connecticut) 06517 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System Requirements
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2440 Inspection of Ground, Chromium Plated Steel PartsConditional to NDT personnel certification per PSR0310
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2772 Heat Treatment of Aluminum Alloy Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6088 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-STD-2154 Inspection, Ultrasonic, Wrought Metals, Process for Conditional to NDT personnel certification per PSR0310Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and ServicingConditional to physical auditWeber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-B594 Aluminum Alloy Wrought Products for Aerospace Applications, Ultrasonic Inspection ofConditional to NDT personnel certification per PSR0310Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E112 Estimating the Average Grain Size of Metals
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR0310Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0307 Hardness inspection MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E3 Standard Practice for Preparation of Metallographic Specimens
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 44 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E407 Standard Test Method for Microetching Metals and Alloys
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0527 Room Temperature Tensile MTL-Material Test LaboratoriesH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E8 Standard Test Methods of Tension Testing of Metallic Materials
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for SuppliersConditional to physical auditWeber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & CastingsConditional to physical auditWeber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements Conditional to physical audit
Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6868 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-I-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR0310Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR0310Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0302 Ultrasonic Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-2154 Inspection, Ultrasonic, Wrought Metals, Process for Conditional to NDT personnel certification per PSR0310Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-6866 Inspection, Liquid Penetrant Conditional to NDT personnel certification per PSR0310Weber Metals Inc. WEB01U 16706, Garfield Avenue; PO Box 318 Paramount CA (California) 90723-0318 USA PSR-0310 NAS Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Wesco Aircraft Hardware Corp WES01U 27727 Scott Avenue Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Wesco Aircraft Hardware Corp WES01U 27727 Scott Avenue Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
Wesco Aircraft Hardware Corp WES01U 27727 Scott Avenue Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Wesco Aircraft Hardware Corp WES01U 27727 Scott Avenue Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-17025 General requirements for the competence of testing and calibration laboratories
Wesco Aircraft Hardware Corp WES01U 27727 Scott Avenue Valencia CA (California) 91355 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Westmoreland Mechanical Testing WES07U 221 Westmoreland Drive Youngstown PA (Pennsylvania)15696 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Westmoreland Mechanical Testing WES07U 221 Westmoreland Drive Youngstown PA (Pennsylvania)15696 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval ISO-17025 General Requirements for the competence of testing and
Westbrook Technologies WES09C 440 Passmore Avenue Scarborough ON (Ontario) M1V 5J8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Westbrook Technologies WES09C 440 Passmore Avenue Scarborough ON (Ontario) M1V 5J8 Canada PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Western Professional Inc. WES13U 3460 Brady Ct, Ne Salem OR (Oregon) 97303 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Wheelabrator DBA Impact Finishers WHE01O 107-109 Whitby Road Slough UK UK (United Kingdom)PSR-0226 Shot Peening of Metal Parts SE-Surface Enhacement H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2430 Shot Peening Automatic Conditional to clean Shot Peen per PSR0187. For manual application, conditional to approval of specific and detailed supplier procedure.
Wheelabrator DBA Impact Finishers WHE01O 107-109 Whitby Road Slough UK UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Wheelabrator DBA Impact Finishers WHE01O 107-109 Whitby Road Slough UK UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemC - Conditional Approval HPS-010 Quality Assurance Requirements for Suppliers
Wheelabrator DBA Impact Finishers WHE01O 107-109 Whitby Road Slough UK UK (United Kingdom)PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
EDR Industries Inc. DBA WIL-NIC WIL05U 100 Commercial Street Freeport NY (New York) 11520 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
EDR Industries Inc. DBA WIL-NIC WIL05U 100 Commercial Street Freeport NY (New York) 11520 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
EDR Industries Inc. DBA WIL-NIC WIL05U 100 Commercial Street Freeport NY (New York) 11520 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0257 Heat Treatment of Parts in VacuumHT-Heat Treatment C - Conditional Approval AMS-2769 Heat Treatment of Parts in a VacuumConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment C - Conditional Approval AMS-2770 Heat Treatment of Wrought Aluminum Alloy PartsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment C - Conditional Approval AMS-2772 Heat Treatment of Aluminum Alloy Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0256 Heat Treatment of Aluminum AlloysHT-Heat Treatment C - Conditional Approval AMS-H-6088 Heat Treatment of Aluminum AlloysConditional to Pyrometry per AMS-2750. Conditional to operator qualification per ARP 1962
for straightening operations.
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0122 Heat Treatment of Ferritic Corrosion Resistant SteelsHT-Heat Treatment C - Conditional Approval AMS-H-6875 Heat Treatment of Steel Raw Materials- Conditional to Pyrometry per AMS 2750.- Conditional to Operator qualification per ARP1962
for straightening operations.- Specify Cryogenic Madia used (ex.: Dry ice, liquid Nitrogen…).
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310.
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0306 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
MW Crow (d.b.a. W. Pat Crow Forgings) WPA01U 200, Luxton Street Fort Worth TX (Texas) 76101-1720 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
WS Wilson WSW01U 24, Harbor Park Drive Port Washington NY (New York) 11050 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9120 Quality Management Systems - Requirements for Aviation, Space and Defense Distributors
WS Wilson WSW01U 24, Harbor Park Drive Port Washington NY (New York) 11050 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
WS Wilson WSW01U 24, Harbor Park Drive Port Washington NY (New York) 11050 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0215 Pyrometry HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0711 Forging, Low Alloy Steel None C - Conditional Approval AMS-F-7190 Forging, Steel, For Aircraft/ Aerospace Equipment and Special Ordnance Applications
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class B Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class C Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-6875, Class D Heat Treatment of Steel Raw MaterialsConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9000 Aerospace Basic Quality System Standard (superseded by SAE AS 9100)
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0307 Hardness Inspection MTL/HT H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E10 Standard Test Method for Brinell Hardness of Metallic Materials
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E112 Estimating the Average Grain Size of Metals
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1417 Standard Practice for Liquid Penetrant TestingConditional to NDT personnel certification per PSR-0310.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E1444 Standard Practice for Magnetic Particle TestingConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E3 Standard Practice for Preparation of Metallographic Specimens
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E340 Standard Test Method for Macroetching Metals and Alloys
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0503 Metallography MTL/CP H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekASTM-E407 Standard Test Method for Microetching Metals and Alloys
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710 General Requirements for Forging & Castings
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0255 Heat Treatment of Martensitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, Class B Heat Treatment of Steel, Process forConditional to Pyrometry per AMS-2750. Conditional to Techniques approval for parts above
180 KSI.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0253 Heat Treatment of Austenitic Corrosion Resistant SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, Class C Heat Treatment of Steel, Process forConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0252 Heat Treatment of Precipitation-Hardening Corrosion Resistant and Maraging SteelsHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-6875, Class D Heat Treatment of Steel, Process forConditional to Pyrometry per AMS-2750. Conditional to techniques approval for parts above
180 KSI.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0258 Heat Treatment of Titanium AlloysHT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-H-81200 Heat Treatment of Titanium and Titanium AlloysConditional to Pyrometry per AMS2750. Conditional to operator qualification ARP1962 for
straightening operations.Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0306 Penetrant Inspection NDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0317 Magnetic Particle InspectionNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekMIL-STD-1907 Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and WeldmentsConditional to NDT personnel certification per PSR-0310. Conditional to techniques approval.
Wyman-Gordon Company WYM02U 244, Worcester Street; PO BOX 7999 North Grafton MA (Massachusetts)01536-8001 USA PSR-0310 Certification and Qualification of Nondestructive Test PersonnelNDT-Non Destructive Testing H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekNAS-410 NAS Certification and Qualification of Nondestructive Test PersonnelMT and PT, Level 2 & 3.Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0711 Forging, Low Alloy Steel None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2375 Control of Forgings Requiring First Article Approval
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0712 Forging, Corrosion Resistant SteelNone H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2375 Control of Forgings Requiring First Article Approval
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0718 Forging, Titanium Alloy None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2375 Control of Forgings Requiring First Article Approval
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0711 Forging, Low Alloy Steel None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2376 Qualification, Approval and Control of Premium-QualityForgings Alloy Steels and Heat-Treatable Corrosion and Heat Resistant Steels and Alloys
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0712 Forging, Corrosion Resistant SteelNone H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2376 Qualification, Approval and Control of Premium-QualityForgings Alloy Steels and Heat-Treatable Corrosion and Heat Resistant Steels and Alloys
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0718 Forging, Titanium Alloy None H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2376 Qualification, Approval and Control of Premium-QualityForgings Alloy Steels and Heat-Treatable Corrosion and Heat Resistant Steels and Alloys
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0215 Heat Treatment HT-Heat Treatment H - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAMS-2750 Pyrometry Specify equipment classes and instrumentation types for each furnace and/or oven
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekAS-9100 Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-010 Quality Assurance Requirements for Suppliers
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemA - Approval HPS-710
Wyman-Gordon Forgings - Texas WYM04U Telge Rd Houston TX (Texas) 77095-5038 USA PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekISO-9001 Quality Management System - Requirements
Zodiac Interconnect dba ICORE ZOD01U Av. Ishikawa # 1200 Plant 3 Supra Industrial ParkChihuahua Chihuahua 31183 Mexico PSR-0010 Quality Assurance Systems and Related SystemsAQS-Aerospace Quality SystemH - Approval based on Approval or Accreditation by Third Party recognized by Héroux-DevtekHPS-010 Quality Assurance Requirements for Suppliers
General Requirements for Forging & Castings
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 45 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 46 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Approved Supplier List /
Liste des fournisseurs approuvés
Page 47 of 47
Supplier name /
Nom du fournisseur
Supplier Code /
Code fournisseur
Address /
Adresse
City /
Ville
State /
Province
Postal Code /
Code Postal
Country /
Pays
Process Code /
Code procédé
(PSR-#)
Process Description /
Description Procédé
NADCAP Commodity /
Commodité NADCAP
Approval Code /
Code Approbation
Specification /
Spécification
Specification Title /
Titre spécification
Limitations and Conditions /
Limitations et Conditions
Document revision: 241
Revised Date: 2020-04-08
Suppliers must insure use of customers approved sources as per HD PO clauses
Supplier must ensure to use ITAR/CGP certified sources.
Recommended