View
214
Download
0
Category
Preview:
Citation preview
CAN +1 438 807 0872US +1 650 410 3120
sales@aon3d.com
Choosing the right 3D printer is a complex process. Get in touch with one of our engineers
Looking for more information?
AON-M2High-Temperature Industrial 3D Printer
The AON-M2 was built to work with high-performance thermoplastics such as PEEK, ULTEM®, and much more
Contact
Made in Canada
Technology
Build Volume
Max Speed
Z Layer Height
Max. Temperatures
Materials
Printing
Software & ConnectivitySlicer Control Interface
PhysicalBuild Plate Toolheads
Nozzle Sizes (mm)
Filament Size (mm)
Resolution
Electrical Supply VoltageOutlet
Fused Filament Fabrication (FFF)
454 x 454 x 640 mm, 18 x 18 x 25 in
500 mm/s
≥ 0.05 mm to 0.5 mm
470°C+200°C+120°C+
PEEK, PEKK, PEI (ULTEM®), PPSU, PSU, PPS, Nylon, PC, TPU, TPE, PETs, HIPS, PVA, ASA, ABS, etc.Carbon or other fiber filled variants of the above. Various soluble and breakaway support materials
Simplify3DLCD control screen. WiFi enabled. Ethernet.
Hot End
Heated Bed
Build Chamber
208V-240 V, 20 A, 50/60 Hz, Single PhaseL6-20
ALCA 5 precision aluminum base. Hot-swappable. Multiple build surfaces available.
Dual, fully independent
Hardened Steel: 0.25, 0.3, 0.4, 0.6 (default), 0.8, 1.0, 1.2
1.75
XY: 0.025 mm Z: 0.001 mm
Additional Features
Fully enclosed, activelyheated chamber
Dual Independent Extruders
Automatic bed leveling
Filament run-out detection
Watercooled hot-ends and steppers
Hot-swappable build plate
!
AON-M2 3D PRINTER SPECIFICATIONS
(theoretical)
Recommended