View
225
Download
0
Category
Tags:
Preview:
Citation preview
Analog Layout with tsmc035
• It is better you understand ~wllin/cell_design/celltut.pdf to have the basic layout skill up to chapter 4.
• Tsmc035 files for layout are ~wllin/tsmc035/Virtuoso/{display.drf,035ms.tf}
• Place the two file where you run icfb.• You need to run Calibre DRC and LVS to make sure layo
ut correct. Rule files are in ~wllin/tsmc035/Calibre_DRC/CM35P5_4M.23b.pre ~wllin/tsmc035/Calibre_LVS/cali035pMM5V_2P4M.lvs updated on 5/18/2006 to solve pin/port not found error.
• You need to stream out layout before run “calibre –gui” To stream out: icfb window file export stream
Virtuoso tech file & Calibre
• In icfb window, tools technology file manager new 035ms.tf and tech lib name
• Source /usr/mentor/cic_setup/calibre.csh
• calibre –gui
Technology file manager
New technology library
Layout
Layout
Layout
常用 bindkey
• f --- fit edit
• ^z --- zoom in
• Z --- zoom out
• c --- copy
• m --- move
• s --- stretch
• k --- create ruler
• K --- clear all ruler
• F2 --- save
• F3 --- rotate, mirror ( 需配合 copy, move 使用 )
• 拖曳滑鼠右鍵 --- zoom area
• 單點滑鼠右鍵 --- 1. 重複前一次指令 2.rotate ( 需配合 copy, move 使用 )
Layout
Layout
Layout - contact
Layout - label
Calibre - DRC
DRC
Calibre - LVS
LVS
PEX
• Analog block RC extraction
source /usr/mentor/cic_setup/calibre.csh
load("/usr/mentor/Calibre_ss/cur/shared/pkgs/icv/tools/queryskl/calibre.skl") in icfb window
From a layout window,Calibre run pex rule can be find in
~wllin/tsmc035/RC_Ex
PEX
PEX
Recommended