View
232
Download
0
Category
Preview:
Citation preview
AIRCRAFT CABLE • WIRE ROPE •RIGGING HARDWARE
CHAIN •LIFTING SLINGS •TIE-DOWNS
Peak Trading Corporation does not make any warranties of merchantability or fitness for any particular purpose or any other warranty, express or implied. Unless specifically stated, products are of commercial quality and standards. Buyer must determine suitability for the products particular use or purpose and will assume any and all risk and liability what-soever resulting from the use of all products, whether used singly or in combination with other products or components. If requested and/or applicable, manufacturer’s material certifications may be provided with no representations made as to their accuracy.
ORDERING INFORMATIONOrdering hours are 8:00 AM to 5:00 PM, EST, Monday through Friday. If faxing an order, please include a daytime phone number.
PRICING We will do our best to maintain current prices. However, due to fluctuating prices of raw materials, pricing is subject to change without notice.
CREDIT CARDSWe accept the following major credit cards: VISA, MasterCard, Discover and American Express.
INVOICE TERMSBilling terms are net 30 days from the date of invoice for approved credit accounts. The minimum invoice amount is $50.00.
SALES TAX New York State sales tax is required on all orders picked up or delivered in New York unless your New York State tax exemption certificate is on file with our office. All other applicable taxes are the purchaser’s responsibility.
RETURNED CHECKSA $20.00 fee will be charged for any check returned to Peak Trading.
FREIGHT CHARGESAll materials are sold F.O.B. Shipping Point. Freight prepaid on orders over 1,000 lbs. Peak Trading reserves the right to ship by the carrier of its choice. Any damage in transit or loss of freight is the responsibility of the carrier. Claims should be made directly to the freight carrier.
TERMS & CONDITIONS LATE CHARGESA finance charge of 1.5% per month will be added to all past due accounts. Accounts with a past due balance are ineligible for additional shipments until the outstanding balance and finance charges are paid in full.
NOTICE OF DEFECT OR DAMAGEBuyer is responsible to inspect all products upon receipt of order. Claims for damages, shortages or defects must be made within 30 days of original receipt of goods. All claims not made, in writing to Peak Trading Corporation within 30 days of original receipt of goods shall be deemed waived.
Peak Trading Corporation will not pay any claim for labor, delays, or damage by reason of their use. No products shall be returned without prior consent and Return Authorization Number (RA Number).
To request a Return Authorization Number by phone, please call 800.952.7325 or 845.338.1325 between 8:30 am – 5:00 pm EST. To contact us by email, be sure to include your order number, account number, and the item number(s) for the item(s) you want to return.
RETURNED MERCHANDISEOur goal is 100% customer satisfaction. If merchandise needs to be returned, it must have an RGA number. Merchan-dise cannot be returned without prior approval from Peak Trading. Requests for returns must be made within 30 days of original receipt of goods. All returns must be in salable condition. If the merchandise is being returned as a result of customer error, we will charge a 15% restocking fee plus any outbound and inbound freight charges. Custom assemblies and custom lengths of cable, wire rope, and chain are not returnable.
2 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Table of Contents
Aircraft CableAircraft Cable-Galvanized ������������������������������������ 3Aircraft Cable-Galvanized Vinyl Coated �������������� 3Aircraft Cable-SS �������������������������������������������������� 4
BlocksSnatch Blocks ����������������������������������������������������� 30Wire Rope Blocks (Small)����������������������������������� 28Wood Shell Blocks ���������������������������������������������� 31
ChainG100 Lifting Chain ��������������������������������������������� 19G30 Proof Coil Chain ������������������������������������������ 19G30 Proof Coil Chain SS ������������������������������������� 19G70 Transport Chain YC ������������������������������������� 19Jack Chain, Single-Double ��������������������������������� 19Loop Chain, Single-Double ��������������������������������� 19
Lifting SlingsChain Slings �������������������������������������������������������� 16Roundslings ��������������������������������������������������������� 17Synthetic Web Slings ������������������������������������������ 17Wear Pads ����������������������������������������������������������� 18Wire Rope Bridles ����������������������������������������������� 15Wire Rope Slings ������������������������������������������������� 14
Rigging HardwareBeam Clamps ������������������������������������������������������ 31Clevis Grab Hooks ����������������������������������������������� 23Clevis Slip Hooks ������������������������������������������������ 24Cold Shuts ����������������������������������������������������������� 25Connecting Links ������������������������������������������������ 25Eye Hoist Hooks �������������������������������������������������� 23Eye Bolts �������������������������������������������������������������� 27Eye Nuts ��������������������������������������������������������������� 25Fist Grips ������������������������������������������������������������� 10Forged Links �������������������������������������������������������� 24Hammerlocks ������������������������������������������������������ 25Lag Eye Screws ��������������������������������������������������� 28Lap Links ������������������������������������������������������������� 25Quick Links ���������������������������������������������������������� 25Quick Links - SS �������������������������������������������������� 26S Hooks ���������������������������������������������������������������� 26Shackles �������������������������������������������������������������� 22Spring Hooks ������������������������������������������������������� 25Swage Fittings ���������������������������������������������������� 11Swage Stops �������������������������������������������������������� 12Swivels ����������������������������������������������������������������� 29Thimbles �������������������������������������������������������������� 12Turnbuckles ��������������������������������������������������������� 20Wire Rope Clips ��������������������������������������������������� 10
Rope3-Strand Rope ����������������������������������������������������� 36
StrandStrand - Galvanized ����������������������������������������������� 5
Tie Down EquipmentBinder Chains ������������������������������������������������������ 35Load Binders ������������������������������������������������������� 35Ratchet Straps ���������������������������������������������������� 35
Tools-Cutting & SwagingBolt-Chain Cutters ���������������������������������������������� 34Swaging Tools ����������������������������������������������������� 32Wire Rope Cutters ���������������������������������������������� 34
Wire RopeWire Rope-Bright General Purpose ��������������������� 5Wire Rope-Galvanized General Purpose ������������� 7Wire Rope-Stainless Steel ������������������������������������ 9
Our MissionWe at Peak Trading Corporation are 100% committed to exceeding your expectations in pricing, service and satisfaction. Understanding our customers’ needs and responding to them promptly are the cornerstone of our company philosophy. You will always be greeted by our friendly and knowledgeable staff who will help in any way they can. We carry a substantial amount of stock for immediate shipment. If you don’t see what you are looking for in this catalog, please ask and we will be happy to fulfill your request. Our commitment to you is sincere. Our purpose is to create opportunity, enrichment and extraordinary achievement for everyone we touch.
VISIT OUR WEBSITE...www.peaktrading.comTo find our complete line of
PRODUCTS
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
3
Aircraft Cable-Galvanized
7x7 Galvanized Aircraft Cable�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
106-GAC7/062-XXXX 1/16” 480 250’, 500’, 1000’, 5000’
106-GAC7/093-XXXX 3/32” 920 250’, 500’, 1000’, 5000’
106-GAC7/125-XXXX 1/8” 1700 250’, 500’, 1000’, 5000’
106-GAC7/156-XXXX 5/32” 2600 250’, 500’, 1000’, 5000’
106-GAC7/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’
106-GAC7/250-XXXX 1/4” 6100 250’, 500’, 1000’, 5000’
7x7 Galvanized Aircraft Cable Korean�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
106K-GAC7/062-XXXX 1/16” 1700 250’, 500’, 1000’, 5000’
106K-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’
106K-GAC7/125-XXXX 1/8” 480 250’, 500’, 1000’, 5000’
106K-GAC7/156-XXXX 5/32” 2600 250’, 500’, 1000’, 5000’
106K-GAC7/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’
106K-GAC7/250-XXXX 1/4” 6100 250’, 500’, 1000’, 5000’
7x19 Galvanized Aircraft Cable�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
106-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’
106-GAC9/125-XXXX 1/8” 2000 250’, 500’, 1000’, 5000’
106-GAC9/156-XXXX 5/32” 2800 250’, 500’, 1000’, 5000’
106-GAC9/187-XXXX 3/16” 4200 250’, 500’, 1000’, 5000’
106-GAC9/218-XXXX 7/32” 5600 250’, 500’, 1000’, 5000’
106-GAC9/250-XXXX 1/4” 7000 250’, 500’, 1000’, 5000’
106-GAC9/312-XXXX 5/16” 9800 250’, 500’, 1000’, 5000’
106-GAC9/375-XXXX 3/8” 14,400 250’, 500’, 1000’, 5000’
7x19 Galvanized Aircraft Cable�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
106K-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’
106K-GAC9/125-XXXX 1/8” 2000 250’, 500’, 1000’, 5000’
106K-GAC9/156-XXXX 5/32” 2800 250’, 500’, 1000’, 5000’
106K-GAC9/187-XXXX 3/16” 4200 250’, 500’, 1000’, 5000’
106K-GAC9/218-XXXX 7/32” 5600 250’, 500’, 1000’, 5000’
106K-GAC9/250-XXXX 1/4” 7000 250’, 500’, 1000’, 5000’
106K-GAC9/312-XXXX 5/16” 9800 250’, 500’, 1000’, 5000’
106K-GAC9/375-XXXX 3/8” 14,400 250’, 500’, 1000’, 5000’
7x7 Vinyl Coated Galvanized Aircraft Cable Clear�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
107-VGAC7047/062-XXXX 3/64-1/16 270 250’, 500’, 1000’, 5000’
107-VGAC7062/093-XXXX 1/16-3/32” 480 250’, 500’, 1000’, 5000’
107-VGAC7062/125-XXXX 1/16-1/8” 480 250’, 500’, 1000’, 5000’
107-VGAC7093/125-XXXX 3/32-1/8” 920 250’, 500’, 1000’, 5000’
107-VGAC7093/187-XXXX 3/32-3/16” 920 250’, 500’, 1000’, 5000’
107-VGAC7125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’
7x7 Vinyl Coated Galvanized Aircraft Cable Black�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
107-VGAC7B062/093-XXXX 1/16-3/32” 480 250’, 500’, 1000’, 5000’
107-VGAC7B062/125-XXXX 1/16-1/8” 480 250’, 500’, 1000’, 5000’
107-VGAC7B093/125-XXXX 3/32-1/8” 920 250’, 500’, 1000’, 5000’
107-VGAC7B093/187-XXXX 3/32-3/16” 920 250’, 500’, 1000’, 5000’
107-VGAC7B125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’
4 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Aircraft Cable
7x19 Vinyl Coated Galvanized Aircraft Cable Clear • Made in accordance with E3:H15h Federal Specification�RR-W-410G
• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
107-VGAC9125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’
107-VGAC9187/250-XXXX 3/16-1/4” 3700 250’, 500’, 1000’, 5000’
107-VGAC9250/312-XXXX 1/4-5/16” 6400 250’, 500’, 1000’, 5000’
107-VGAC9312/375-XXXX 5/16-3/8” 5400 250’, 500’, 1000’, 5000’
107-VGAC9375/437-XXXX 3/8-7/16” 14,400 250’, 500’, 1000’, 5000’
7x19 Vinyl Coated Galvanized Aircraft Cable Black�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
107-VGAC9B125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’
107-VGAC9B187/250-XXXX 3/16-1/4” 3700 250’, 500’, 1000’, 5000’
107-VGAC9B250/312-XXXX 1/4-5/16” 6400 250’, 500’, 1000’, 5000’
107-VGAC9B312/375-XXXX 5/16-3/8” 5400 250’, 500’, 1000’, 5000’
107-VGAC9B375/437-XXXX 3/8-7/16” 14,400 250’, 500’, 1000’, 5000’
7x7 Stainless Steel Aircraft Cable T304�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
109-SSAC7/304/062-XXXX 1/16” 480 250’, 500’, 1000’, 5000’
109-SSAC7/304/093-XXXX 3/32” 920 250’, 500’, 1000’, 5000’
109-SSAC7/304/125-XXXX 1/8” 1700 250’, 500’, 1000’, 5000’
109-SSAC7/304/156-XXXX 5/32” 2400 250’, 500’, 1000’, 5000’
109-SSAC7/304/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’
7x19 Stainless Steel Aircraft Cable T304�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
109-SSAC9/304/125-XXXX 1/8” 1760 250’, 500’, 1000’, 5000’
109-SSAC9/304/156-XXXX 5/32” 2400 250’, 500’, 1000’, 5000’
109-SSAC9/304/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’
109-SSAC9/304/218-XXXX 7/32” 5000 250’, 500’, 1000’, 5000’
109-SSAC9/304/250-XXXX 1/4” 6400 250’, 500’, 1000’, 5000’
109-SSAC9/304/312-XXXX 5/16” 9000 250’, 500’, 1000’, 5000’
109-SSAC9/304/375-XXXX 3/8” 12,000 250’, 500’, 1000’, 5000’
7x7 Stainless Steel Aircraft Cable T316�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
109-SSAC7/316/062-XXXX 1/16” 360 250’, 500’, 1000’, 5000’
109-SSAC7/316/093-XXXX 3/32” 700 250’, 500’, 1000’, 5000’
109-SSAC7/316/125-XXXX 1/8” 1360 250’, 500’, 1000’, 5000’
7x19 Stainless Steel Aircraft Cable T316�•��Made�in�accordance�with�Federal�Specification�
RR-W-410G• Available in a variety of put-ups
Item ID Size MBS (lbs) Available Put Ups
109-SSAC9/316/125-XXXX 1/8” 1300 250’, 500’, 1000’, 5000’
109-SSAC9/316/187-XXXX 3/16” 2900 250’, 500’, 1000’, 5000’
109-SSAC9/316/250-XXXX 1/4” 4900 250’, 500’, 1000’, 5000’
109-SSAC9/316/312-XXXX 5/16” 7600 250’, 500’, 1000’, 5000’
109-SSAC9/316/375-XXXX 3/8” 11,000 250’, 500’, 1000’, 5000’
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
5
Strand / Wire Rope
1x7 Common Strand • Our 1x7 Common Grade Galvanized Strand (Guy
Strand) is very pliable and great for splicing. This common strand is used for many of the same applications as our Extra High Strength Galvanized Strand, but it is easily manipulated by hand. When bending, common grade strand will�stay�bent.�Galvanized�finish�provides�strength and corrosion protection over time. We stock 1x7 common strand in 1/8, 3/16, 1/4, 5/16 and 3/8 inch diameters. Sold in custom lengths and coil form. Meets ASTM A-475-03 Class�A�specification.
Item ID Size MBS (lbs) Available Put Ups
112-GSTR7/125-XXXX 1/8” 540 250’, 500’
112-GSTR7/187-XXXX 3/16” 1150 250’, 500’
112-GSTR7/250-XXXX 1/4” 1900 250’, 500’
112-GSTR7/312-XXXX 5/16” 3200 250’, 500’
112-GSTR7/375-XXXX 3/8” 4250 250’, 500’
1x7 EHS Strand • Our 1x7 Extra High Strength (EHS) Galvanized
Strand (Guy Strand) is commonly used by arborists and linemen for bracing and tensioning applications because it has excellent tensile strength�and�very�little�stretch.�Galvanized�finish�provides strength and corrosion protection over time. For use with Tree Grips or Cable Clips or other Guy Grip Products. Cannot be spliced. Sold in custom lengths and coil form. Meets ASTM A-475-03�Class�A�specification.
Item ID Size MBS (lbs) Available Put Ups
112-GSTR7EHS187-XXXX 3/16” 3990 250’, 500’
112-GSTR7EHS250-XXXX 1/4” 6650 250’, 500’
112-GSTR7EHS312-XXXX 5/16” 11,200 250’, 500’
112-GSTR7EHS375-XXXX 3/8” 15,400 250’, 500’
6x25 Fiber Core Bright Wire Rope• Made in accordance with Federal Specification�RR-W-410D
• It is available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
140-F19IPS0250-0000 1/4” 2.74 Per ft
140-F25IPS0312-0000 5/16” 4.26 Per ft
140-F25IPS0375-0000 3/8” 6.1 Per ft
140-F25IPS0437-0000 7/16” 8.3 Per ft
140-F25IPS0500-0000 1/2” 10.7 Per ft
140-F25IPS0562-0000 9/16” 13.5 Per ft
140-F19IPS0625-0000 5/8” 16.7 Per ft
140-F25XIP0750-0000 3/4” 23.8 Per ft
140-F25XIP0875-0000 7/8” 32.2 Per ft
6x25 IWRC Bright Wire Rope• Made in accordance with Federal Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
140-S19XIP0250-0000 1/4” 3.4 Per ft
140-S25XIP0312-0000 5/16” 5.27 Per ft
140-S25XIP0375-0000 3/8” 7.55 Per ft
140-S25XIP0437-0000 7/16” 10.2 Per ft
140-S25XIP0500-0000 1/2” 13.3 Per ft
140-S25XIP0562-0000 9/16” 16.8 Per ft
140-S25XIP0625-0000 5/8” 20.6 Per ft
140-S25XIP0750-0000 3/4” 29.4 Per ft
140-S25XIP0875-0000 7/8” 39.8 Per ft
6x25 Fiber Core Bright Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
140K-F25XIP0250-0000 1/4” 2.74 Per ft
140K-F25XIP0312-0000 5/16” 4.26 Per ft
140K-F25XIP0375-0000 3/8” 6.1 Per ft
140K-F25XIP0437-0000 7/16” 8.27 Per ft
140K-F25XIP0500-0000 1/2” 10.7 Per ft
140K-F25XIP0562-0000 9/16” 13.5 Per ft
140K-F25XIP0625-0000 5/8” 16.7 Per ft
140K-F25XIP0750-0000 3/4” 32.2 Per ft
140K-F25XIP0875-0000 7/8” 32.2 Per ft
We Make Custom Assemblies!Wire Rope Winchlines / Slings / Assemblies
Aircraft Cable Winchlines / Slings / Assemblies Synthetic Rope Winchlines / Slings / Assemblies
Chain Slings / Assemblies
6 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Wire Rope-Bright General Purpose
6x25 IWRC Bright Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G
• Extra Improved plow steel
Item ID Size MBS (tons) Put Up (ft)
140K-S25XIP0250-0000 1/4” 3.4 Per ft
140K-S25XIP0312-0000 5/16” 5.27 Per ft
140K-S25XIP0375-0000 3/8” 7.55 Per ft
140K-S25XIP0437-0000 7/16” 7.55 Per ft
140K-S25XIP0500-0000 1/2” 13.3 Per ft
140K-S25XIP0562-0000 9/16” 16.8 Per ft
140K-S25XIP0625-0000 5/8” 20.6 Per ft
140K-S25XIP0750-0000 3/4” 29.4 Per ft
140K-S25XIP0875-0000 7/8” 32.2 Per ft
140K-S25XIP1000-0000 1” 51.7 Per ft
140K-S25XIP1125-0000 1-1/8” 65 Per ft
140K-S25XIP1250-0000 1-1/4” 79 Per ft
140K-S25XIP1375-0000 1-3/8” 96 Per ft
140K-S25XIP1500-0000 1-1/2” 114 Per ft
6x37 Fiber Core Bright Wire Rope• Made in accordance with Federal Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
140-F37IPS0250-0000 1/4” 2.74 Per ft
140-F37IPS0312-0000 5/16” 4.26 Per ft
140-F37IPS0375-0000 3/8” 6.1 Per ft
140-F37IPS0437-0000 7/16” 8.27 Per ft
140-F37IPS0500-0000 1/2” 10.7 Per ft
140-F37IPS0562-0000 9/16” 13.5 Per ft
140-F37IPS0625-0000 5/8” 16.7 Per ft
140-F37IPS0750-0000 3/4” 23.8 Per ft
140-F37IPS0875-0000 7/8” 32.2 Per ft
6x37 Fiber Core Bright Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
140K-F37XIP0250-0000 1/4” 2.74 Per ft
140K-F37XIP0312-0000 5/16” 4.26 Per ft
140K-F37XIP0375-0000 3/8” 6.1 Per ft
140K-F37XIP0437-0000 7/16” 8.27 Per ft
140K-F37XIP0500-0000 1/2” 10.7 Per ft
140K-F37XIP0562-0000 9/16” 13.5 Per ft
140K-F37XIP0625-0000 5/8” 20.9 Per ft
140K-F37XIP0750-0000 3/4” 29.4 Per ft
140K-F37XIP0875-0000 7/8” 29.8 Per ft
6x37 IWRC Bright Wire Rope• Made in accordance with Federal Specification�RR-W-410G
• Extra Improved plow steel
Item ID Size MBS (tons) Put Up (ft)
140-S37XIP0250-0000 1/4” 3.4 Per ft
140-S37XIP0312-0000 5/16” 5.27 Per ft
140-S37XIP0375-0000 3/8” 7.55 Per ft
140-S37XIP0437-0000 7/16” 10.2 Per ft
140-S37XIP0500-0000 1/2” 13.3 Per ft
140-S37XIP0562-0000 9/16” 16.8 Per ft
140-S37XIP0625-0000 5/8” 20.9 Per ft
140-S37XIP0750-0000 3/4” 29.4 Per ft
140-S37XIP0875-0000 7/8” 29.8 Per ft
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
7
Wire Rope
6x37 IWRC Bright Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G
• Extra Improved plow steel
Item ID Size MBS (tons) Put Up (ft)
140K-S37XIP0250-0000 1/4” 3.4 Per ft
140K-S37XIP0312-0000 5/16” 5.27 Per ft
140K-S37XIP0375-0000 3/8” 7.55 Per ft
140K-S37XIP0437-0000 7/16” 10.2 Per ft
140K-S37XIP0500-0000 1/2” 13.3 Per ft
140K-S37XIP0562-0000 9/16” 16.8 Per ft
140K-S37XIP0625-0000 5/8” 20.6 Per ft
140K-S37XIP0750-0000 3/4” 29 Per ft
140K-S37XIP0875-0000 7/8” 39.8 Per ft
140K-S37XIP1000-0000 1” 51.7 Per ft
140K-S37XIP1125-0000 1-1/8” 65 Per ft
140K-S37XIP1250-0000 1-1/4” 79.9 Per ft
140K-S37XIP1375-0000 1-3/8” 96 Per ft
140K-S37XIP1500-0000 1-1/2” 114 Per ft
140K-S37XIP1625-0000 1-5/8” 132 Per ft
140K-S37XIP1750-0000 1-3/4” 153 Per ft
140K-S37XIP2000-0000 2” 198 Per ft
6x25 Fiber Core Galv Wire Rope• Made in accordance with Federal Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
141-F19IPS0375-0000 3/8” 5.49 Per ft
141-F19IPS0437-0000 7/16” 7.4 Per ft
141-F19IPS0500-0000 1/2” 9.63 Per ft
141-F19IPS0562-0000 9/16” 12 Per ft
141-F19IPS0625-0000 5/8” 15 Per ft
141-F19IPS0750-0000 3/4” 21.4 Per ft
141-F19IPS0875-0000 7/8” 29 Per ft
6x25 Fiber Core Galv Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
141K-F25XIP0375-0000 3/8” 6.8 Per ft
141K-F25XIP0437-0000 7/16” 9.2 Per ft
141K-F25XIP0500-0000 1/2” 12 Per ft
141K-F25XIP0625-0000 5/8” 18.5 Per ft
141K-F25XIP0562-0000 9/16” 15 Per ft
141K-F25XIP0750-0000 3/4” 26.5 Per ft
141K-F25XIP0875-0000 7/8” 35.8 Per ft
141K-F25XIP1000-0000 1” 46.5 Per ft
141K-F25XIP1125-0000 1-1/8” 58.5 Per ft
141K-F25XIP1250-0000 1-1/4” 71.9 Per ft
141K-F25XIP1375-0000 1-3/8” 102 Per ft
141K-F25XIP1500-0000 1-1/2” 118.8 Per ft
6x25 IWRC Galv Wire Rope• Made in accordance with Federal Specification�RR-W-410G
• Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
141-S25XIP0375-0000 3/8” 6.8 Per ft
141-S25XIP0437-0000 7/16” 9.2 Per ft
141-S25XIP0500-0000 1/2” 12 Per ft
141-S25XIP0562-0000 9/16” 15.1 Per ft
141-S25XIP0625-0000 5/8” 18.5 Per ft
141-S25XIP0750-0000 3/4” 26.5 Per ft
141-S25XIP0875-0000 7/8” 35.8 Per ft
8 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Wire Rope-Galvanized General Purpose
6x25 IWRC Galv Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G
• Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
141K-S25XIP0375-0000 3/8” 6.8 Per ft
141K-S25XIP0437-0000 7/16” 9.2 Per ft
141K-S25XIP0500-0000 1/2” 12 Per ft
141K-S25XIP0562-0000 9/16” 15.1 Per ft
141K-S25XIP0625-0000 5/8” 18.5 Per ft
141K-S25XIP0750-0000 3/4” 26.5 Per ft
141K-S25XIP0875-0000 7/8” 35.8 Per ft
141K-S25XIP1000-0000 1” 46.8 Per ft
141K-S25XIP1125-0000 1-1/8” 58.5 Per ft
141K-S25XIP1250-0000 1-1/4” 71.9 Per ft
141K-S25XIP1375-0000 1-3/8” 86.4 Per ft
141K-S25XIP1500-0000 1-1/2” 102.6 Per ft
6x37 Fiber Core Galv Wire Rope• Made in accordance with Federal Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
141-F37XIP0250-0000 1/4” 2.47 Per ft
141-F37XIP0312-0000 5/16” 3.83 Per ft
141-F37XIP0375-0000 3/8” 5.49 Per ft
141-F37XIP0437-0000 7/16” 7.4 Per ft
141-F37XIP0500-0000 1/2” 9.6 Per ft
141-F37XIP0562-0000 9/16” 12.2 Per ft
141-F37XIP0625-0000 5/8” 15 Per ft
141-F37XIP0750-0000 3/4” 21.4 Per ft
141-F37XIP0875-0000 7/8” 29 Per ft
6x37 Fiber Core Galv Wire Rope Korean• Our Wire Rope is made in accordance with�Federal�Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
141K-F37XIP0250-0000 1/4” 2.47 Per ft
141K-F37XIP0312-0000 5/16” 3.83 Per ft
141K-F37XIP0375-0000 3/8” 5.5 Per ft
141K-F37XIP0437-0000 7/16” 7.4 Per ft
141K-F37XIP0500-0000 1/2” 9.63 Per ft
141K-F37XIP0562-0000 9/16” 12.2 Per ft
141K-F37XIP0625-0000 5/8” 15 Per ft
141K-F37XIP0750-0000 3/4” 21.4 Per ft
141K-F37XIP0875-0000 7/8” 29 Per ft
6x37 IWRC Galv Wire Rope• Made in accordance with Federal Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (tons) Put Up (ft)
141-S37XIP0250-0000 1/4” 3.1 Per ft
141-S37XIP0312-0000 5/16” 4.7 Per ft
141-S37XIP0375-0000 3/8” 6.8 Per ft
141-S37XIP0437-0000 7/16” 9.2 Per ft
141-S37XIP0500-0000 1/2” 12 Per ft
141-S37XIP0562-0000 9/16” 15 Per ft
141-S37XIP0625-0000 5/8” 18.5 Per ft
141-S37XIP0750-0000 3/4” 26.5 Per ft
141-S37XIP0875-0000 7/8” 35.8 Per ft
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
9
Wire Rope
6x37 IWRC Galvanized Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G
• Extra Improved plow steel
Item ID Size MBS (tons) Put Up (ft)
141K-S36XIP0250-0000 1/4” 3.1 Per ft
141K-S37XIP0312-0000 5/16” 4.7 Per ft
141K-S37XIP0375-0000 3/8” 6.8 Per ft
141K-S37XIP0437-0000 7/16” 9.2 Per ft
141K-S37XIP0500-0000 1/2” 12 Per ft
141K-S37XIP0562-0000 9/16” 12 Per ft
141K-S37XIP0625-0000 5/8” 15.1 Per ft
141K-S37XIP0750-0000 3/4” 18.5 Per ft
141K-S37XIP0875-0000 7/8” 26.5 Per ft
141K-S37XIP1000-0000 1” 46.5 Per ft
141K-S37XIP1125-0000 1-1/8” 58.5 Per ft
141K-S37XIP1250-0000 1-1/4” 71.9 Per ft
141K-S37XIP1375-0000 1-3/8” 86.4 Per ft
141K-S37XIP1500-0000 1-1/2” 102.6 Per ft
6x25 IWRC SS T304 Wire Rope• Our Wire Rope is made in accordance with�Federal�Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (lbs) Put Up (ft)
142-S25/304/0437-0000 7/16” 16,300 Per ft
142-S25/304/0500-0000 1/2” 22,800 Per ft
142-S25/304/0562-0000 9/16” 28,500 Per ft
142-S25/304/0625-0000 5/8” 35,000 Per ft
142-S25/304/0750-0000 3/4” 49,600 Per ft
142-S25/304/0875-0000 7/8” 66,500 Per ft
142-S25/304/1000-0000 1” 85,400 Per ft
6x37 IWRC SS T304 Wire Rope• Our Wire Rope is made in accordance with�Federal�Specification�RR-W-410G
• Available in Improved Plow Steel and Extra Improved Plow Steel
Item ID Size MBS (lbs) Put Up (ft)
142-S37/304/0437-0000 7/16” 16,300 Per ft
142-S37/304/0500-0000 1/2” 22,800 Per ft
142-S37/304/0562-0000 9/16” 28,500 Per ft
142-S37/304/0625-0000 5/8” 35,000 Per ft
142-S37/304/0750-0000 3/4” 49,600 Per ft
142-S37/304/0875-0000 7/8” 58,000 Per ft
142-S37/304/1000-0000 1” 85,400 Per ft
INCORRECT CORRECT
To Properly measure wire rope, measure the greatest distance of the outer circle. It is very important to
measure wire rope correctly to an accurate rope size.
Measuring Wire Rope
10 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Wire Rope Clips
Malleable Wire Rope Clips• High-Quality Electro-Galvanized Steel
Item ID Size Min Clips Weight
115-WRCM0062 1/16” 2 0.02 lbs
115-WRCM0125 1/8” 2 0.03 lbs
115-WRCM0187 3/16” 2 0.06 lbs
115-WRCM0250 1/4” 2 0.11 lbs
115-WRCM0312 5/16” 2 0.14 lbs
115-WRCM0375 3/8” 2 0.21 lbs
115-WRCM0500 1/2” 3 0.36 lbs
115-WRCM0437 7/16” 4 0.44 lbs
115-WRCM0562 9/16” 4 0.59 lbs
115-WRCM0625 5/8” 4 0.54 lbs
115-WRCM0750 3/4” 4 0.79 lbs
115-WRCM0875 7/8” 4 1.16 lbs
115-WRCM1000 1” 5 1.43 lbs
Drop Forged Wire Rope Clips•��Our�Drop�Forged�Wire�Rope�Clips�are�
constructed of high quality hot dip galvanized, drop forged steel
Item ID Size Min Clips Min Turn Back (in) Weight
115-WRCDF0125 1/8” 2 3.25” 0.06 lbs
115-WRCDF0187 3/16” 2 3.75” 0.10 lbs
115-WRCDF0250 1/4” 2 4.75” 0.20 lbs
115-WRCDF0312 5/16” 2 5.25” 0.31 lbs
115-WRCDF0375 3/8” 2 6.50” 0.47 lbs
115-WRCDF0437 7/16” 2 7” 0.76 lbs
115-WRCDF0500 1/2” 3 11.5” 0.80 lbs
115-WRCDF0562 9/16” 3 12” 1.02 lbs
115-WRCDF0625 5/8” 3 12” 1.04 lbs
115-WRCDF0750 3/4” 4 18” 1.50 lbs
115-WRCDF0875 7/8” 4 19” 2.40 lbs
115-WRCDF1000 1” 5 26” 2.60 lbs
115-WRCDF1125 1-1/8” 7 44” 4.00 lbs
115-WRCDF1250 1-1/4” 7 44” 4.44 lbs
115-WRCDF1375 1-3/8” 8 54” 4.63 lbs
115-WRCDF1500 1-1/2” 8 54” 5.90 lbs
115-WRCDF1750 1-3/4” 8 58” 9.34 lbs
115-WRCDF2000 2” 8 71” 13.00 lbs
Fist Grip Wire Rope Clips• Our Fist Grip Wire rope Clips are used in
combination with wire rope and a thimble to make a secure wire loop
• Clips are galvanized for corrosion resistance•��These�clips�meet�Federal�Specification�
FF-C-450 Type III, Class 1, except for those provisions required of the contractor
Item ID Size Min Clips Min Turn Back (in) Weight
115-WRCFG0187/250 3/16-1/4” 2 4” 0.23 lbs
115-WRCFG0312 5/16” 2 5” 0.30 lbs
115-WRCFG0375 3/8” 2 5-1/4” 0.40 lbs
115-WRCFG0437/500 7/16-1/2” 3 11” 0.62 lbs
115-WRCFG0562/625 9/16-5/8” 3 13-1/2” 1.03 lbs
115-WRCFG0750 3/4” 3 16” 1.75 lbs
115-WRCFG0875 7/8” 4 26” 2.25 lbs
115-WRCFG1000 1” 5 37” 3.00 lbs
SS Malleable Wire Rope Clips• Our SS Malleable Wire Rope Clips are
constructed of high quality Type 304 stainless steel
Item ID Size Min Clips Weight
116-304-WRCM0062 1/16” 2 0.03 lbs
116-304-WRCM0125 1/8” 2 0.04 lbs
116-304-WRCM0187 3/16” 2 0.07 lbs
116-304-WRCM0250 1/4” 2 0.19 lbs
116-304-WRCM0312 5/16” 2 0.19 lbs
116-304-WRCM0375 3/8” 3 0.22 lbs
116-304-WRCM0500 1/2” 3 0.39 lbs
SS Drop Forged Wire Rope Clips• Stainless Steel• Forged Type 304
Item ID Size Min Clips Weight
116-304-WRCDF0062 1/16” 2 0.05 lbs
116-304-WRCDF0125 1/8” 2 0.05 lbs
116-304-WRCDF0187 3/16” 2 0.10 lbs
116-304-WRCDF0250 1/4” 2 0.18 lbs
116-304-WRCDF0312 5/16” 2 0.31 lbs
116-304-WRCDF0375 3/8” 3 0.47 lbs
116-304-WRCDF0500 1/2” 3 0.75 lbs
Also available in Type 316 stainless steel
Also available in Type 316 stainless steel
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
11
Fist Grips / Swage Sleeves
SS Fist Grip Wire Rope Clips• Our Fist Grip Wire rope Clips are used in
combination with wire rope and a thimble to make a secure wire loop
• Clips are galvanized for corrosion resistance•��These�clips�meet�Federal�Specification�
FF-C-450 Type III, Class 1, except for those provisions required of the contractor
Item ID Size Min Clips Min Turn Back (in) Weight
341-S0122-C007 1/4” 2 4” 0.23 lbs
341-S0122-C008 5/16” 2 5” 0.30 lbs
341-S0122-C010 3/8” 2 5-1/4” 0.40 lbs
341-S0122-C013 1/2” 3 11” 0.62 lbs
341-S0122-C016 5/8” 3 13-1/2” 1.03 lbs
341-S0122-C020 3/4” 3 16” 1.75 lbs
Aluminum Swage Sleeves• Capable of supporting 95% of the rated
breaking strength of the cable to which they are applied
Item ID Size Material Weight
115-ASL062 1/16” Aluminum 0.01 lbs
115-ASL093 3/32” Aluminum 0.01 lbs
115-ASL125 1/8” Aluminum 0.02 lbs
115-ASL156 5/32” Aluminum 0.02 lbs
115-ASL187 3/16” Aluminum 0.01 lbs
115-ASL250 1/4” Aluminum 0.03 lbs
115-ASL312 5/16” Aluminum 0.04 lbs
115-ASL375 3/8” Aluminum 0.06 lbs
Copper Swage Sleeves• Capable of supporting the rated breaking
strength of the cable when properly applied
Item ID Size Material Weight
115-CSL062 1/16” Copper 0.01 lbs
115-CSL093 3/32” Copper 0.01 lbs
115-CSL125 1/8” Copper 0.02 lbs
115-CSL156 5/32” Copper 0.02 lbs
115-CSL187 3/16” Copper 0.05 lbs
115-CSL250 1/4” Copper 0.08 lbs
115-CSL312 5/16” Copper 0.12 lbs
115-CSL375 3/8” Copper 0.16 lbs
ZP Copper Swage Sleeves• Capable of supporting the rated breaking
strength of the cable when properly applied
Item ID Size Material Weight
115-CSL062ZP 1/16” Zinc Plated Copper 0.01 lbs
115-CSL093ZP 3/32” Zinc Plated Copper 0.02 lbs
115-CSL125ZP 1/8” Zinc Plated Copper 0.02 lbs
115-CSL156ZP 5/32” Zinc Plated Copper 0.02 lbs
115-CSL187ZP 3/16” Zinc Plated Copper 0.05 lbs
115-CSL218ZP 7/32” Zinc Plated Copper 0.05 lbs
115-CSL250ZP 1/4” Zinc Plated Copper 0.08 lbs
115-CSL312ZP 5/16” Zinc Plated Copper 0.12 lbs
115-CSL375ZP 3/8” Zinc Plated Copper 0.16 lbs
115-CSL437ZP 7/16” Zinc Plated Copper 0.28 lbs
115-CSL500ZP 1/2” Zinc plated Copper 0.39 lbs
SS Swage Sleeves• Use SS Sleeves to lap and eye-splice
stainless steel cable and wire rope• Ideal for general outdoor, marine,
corrosive and other harsh environments
Item ID Size Weight
116-304-SL046 3/64” 0.01 lbs
116-304-SL062 1/16” 0.01 lbs
116-304-SL093 3/32” 0.01 lbs
116-304-SL125 1/8” 0.01 lbs
116-304-SL187 3/16” 0.02 lbs
116-304-SL218 7/32” 0.03 lbs
116-304-SL250 1/4” 0.04 lbs
116-304-SL312 5/16” 0.06 lbs
When properly applied, Aluminum Swage Sleeves are capable of supporting 95% of the rated breaking strength of the cable.
Copper Swage Sleeves are capable of holding the rated breaking strength of the
aircraft cable.
12 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Swage Stops
Aluminum Swage Stops• Capable of holding only 1/3 to 1/2 of
the rated breaking strength of the cable to which they are attached
Item ID Size Weight
115-AST062 1/16” 0.01 lbs
115-AST093 3/32” 0.01 lbs
115-AST125 1/8” 0.01 lbs
115-AST156 5/32” 0.01 lbs
115-AST187 3/16” 0.01 lbs
115-AST250 1/4” 0.02 lbs
115-AST312 5/16” 0.02 lbs
115-AST375 3/8” 0.05 lbs
Copper Swage Stops• Capable of holding only 1/3 to 1/2 of
the rated breaking strength of the cable to which they are attached
Item ID Size Weight
115-CST062 1/16” 0.01 lbs
115-CST093 3/32” 0.01 lbs
115-CST125 1/8” 0.01 lbs
115-CST156 5/32” 0.01 lbs
115-CST187 3/16” 0.01 lbs
115-CST250 1/4” 0.06 lbs
115-CST312 5/16” 0.05 lbs
115-CST375 3/8” 0.04 lbs
AN Type Thimbles• Enhance the longevity of the cable by
protecting loop ends from wearing out and causing fraying
• Zinc Plated, Carbon Steel•��Meet�all�AN-100�Specifications
Item ID Size Weight
115-TAN062 1/16” 0.01 lbs
115-TAN093/125 3/32 & 1/8” 0.01 lbs
115-TAN187 3/16” 0.01 lbs
115-TAN250 1/4” 0.02 lbs
115-TAN312 5/16” 0.04 lbs
115-TAN375 3/8” 0.09 lbs
Standard Duty Thimbles• Meets the performance requirements of�Federal�Specification�FF-T-276b�Type�III, except for those provisions required of the contractor
•��Hot�Dip�Galvanized�Steel
Item ID Size Weight
115-TSD0125 1/8” 0.03 lbs
115-TSD0187 3/16” 0.03 lbs
115-TSD0250 1/4” 0.04 lbs
115-TSD0312 5/16” 0.04 lbs
115-TSD0375 3/8” 0.06 lbs
115-TSD0500 1/2” 0.13 lbs
115-TSD0625 5/8” 0.25 lbs
115-TSD0750 3/4” 0.50 lbs
115-TSD0875 7/8” 0.85 lbs
115-TSD1000 1” 1.04 lbs
Swage Stops are capable of holding 1/3 to 1/2 the rated breaking strength.
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
13
Thimbles
Heavy Duty Thimbles• Longer service life and greater
protection against wear and deformation of the wire rope eye
• Meets the performance requirements of�Federal�Specification�FF-T-276b�Type�III, except for those provisions required of the contractor
•��Hot�Dip�Galvanized�Steel
Item ID Size Weight
115-THD0250 1/4” 0.07 lbs
115-THD0312 5/16” 0.11 lbs
115-THD0375 3/8” 0.24 lbs
115-THD0500 1/2” 0.51 lbs
115-THD0625 5/8” 0.75 lbs
115-THD0750 3/4” 1.32 lbs
115-THD0875 7/8” 1.76 lbs
115-THD1000 1” 2.20 lbs
SS AN Type Thimble• Our Stainless Steel AN Type Thimbles
are designed to meet the most demanding marine, aircraft or industrial requirements
Item ID Size Weight
116-304-TAN062 1/16” 0.01 lbs
116-304-TAN093 3/32” 0.01 lbs
116-304-TAN125 1/8” 0.01 lbs
116-304-TAN187 3/16” 0.01 lbs
116-304-TAN250 1/4” 0.02 lbs
116-304-TAN312 5/16” 0.04 lbs
116-304-TAN375 3/8” 0.07 lbs
SS Standard Duty Thimbles• Made from Type 304 Stainless Steel.
Item ID Size Weight
116-304-TSD0250 1/4” 0.03 lbs
116-304-TSD0312 5/16” 0.05 lbs
116-304-TSD0375 3/8” 0.06 lbs
116-304-TSD0500 1/2” 0.11 lbs
116-304-TSD0625 5/8” 0.25 lbs
116-304-TSD0750 3/4” 0.28 lbs
116-304-TSD1000 1” 0.46 lbs
116-304-TSD0062 1/16” 0.03 lbs
SS Heavy Duty Thimbles• Type 304 Stainless Steel• Our Stainless Steel AN Type Thimbles are
designed to meet the most demanding marine, aircraft or industrial requirements
Item ID Size Weight
116-304-THD0250 1/4” 0.07 lbs
116-304-THD0312 5/16” 0.11 lbs
116-304-THD0375 3/8” 0.25 lbs
116-304-THD0500 1/2” 0.51 lbs
116-304-THD0625 5/8” 0.75 lbs
116-304-THD0750 3/4” 1.20 lbs
116-304-THD1000 1” 2.20 lbs
Also available in Type 316 stainless steel
Also available in Type 316 stainless steel
Also available in Type 316 stainless steel
For Pricing: Contact your Sales Rep or email us at cs@peaktrading.com
14 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Wire Rope Slings
Eye & Eye Wire Rope Slings Import• Premium wire rope slings made to�exacting�specifications�by�our�fabrication team
• High quality Korean wire rope with flemish�eye�splices�and�mechanically�swaged steel sleeves
• Individually tagged with rated capacities�per�OSHA�specifications
Item ID Wire Size
Vertical WLL (tons)
Choker WLL (tons)
Base Length (ft)
050K-S25/0250X002 1/4” 0.65” 0.48 2’
050K-S25/0312X002 5/16” 1 0.74 2’
050K-S25/0375X002 3/8” 1.4 1.1 2’
050K-S25/0437X002 7/16” 1.9 1.4 2’
050K-S25/0500X002 1/2” 2.5 1.9 2’
050K-S25/0625X003 5/8” 3.9 2.9 3’
050K-S25/0875X004 7/8” 7.6 5.6 4’
050K-S25/1000X005 1” 9.8 7.2 5’
050K-S25/0750X004 3/4” 5.6 4.1 4’
050K-S37/1125X005 1-1/8” 12 9.1 5’
050K-S37/1250X006 1-1/4” 15 11 6’
Eye & Eye Wire Rope Slings Domestic• Premium wire rope slings made to�exacting�specifications�by�our�fabrication team
•��High�quality�Domestic�wire�rope�with�flemish�eye�splices�and�mechanically�swaged steel sleeves
• Individually tagged with rated capacities�per�OSHA�specifications
Item ID Wire Size Vertical WLL (tons)
Choker WLL (tons)
Base Length (ft)
050D-S25/0250X002 1/4” 0.65” 0.48 2’
050D-S25/0312X002 5/16” 1 0.74 2’
050D-S25/0375X002 3/8” 1.4 1.1 2’
050D-S25/0437X002 7/16” 1.9 1.4 2’
050D-S25/0500X002 1/2” 2.5 1.9 2’
050D-S25/0625X003 5/8” 3.9 2.9 3’
050D-S25/0750X004 3/4” 5.6 4.1 4’
050D-S25/0875X004 7/8” 7.6 5.6 4’
050D-S25/1000X005 1” 9.8 7.2 5’
050D-S36/1125X005 1-1/8” 12 9.1 5’
050D-S36/1250X006 1-1/4” 15 11 6’
Thimble & Thimble Wire Rope Slings Import• Premium wire rope slings made to�exacting�specifications�by�our�fabrication teamHigh quality American wire�rope�with�flemish�eye�splices�and�mechanically swaged steel sleeves
• Individually tagged with rated capacities�per�OSHA�specifications
Item ID Wire Size
Vertical WLL (tons)
Choker WLL (tons)
Base Length (ft)
050K-S25T/0250X002 1/4” 0.65” 0.48 2’
050K-S25T/0312X002 5/16” 1 0.74 2’
050K-S25T/0375X002 3/8” 1.4 1.1 2’
050K-S25T/0437X002 7/16” 1.9 1.4 2’
050K-S25T/0500X002 1/2” 2.5 1.9 2’
050K-S25T/0625X004 5/8” 3.9 2.9 3’
050K-S25T/0750X003 3/4” 5.6 4.1 4’
050K-S25T/0875X004 7/8” 7.6 5.6 4’
050K-S25T/1000X004 1” 9.8 7.2 5’
Thimble & Thimble Wire Rope Slings Domestic • Premium wire rope slings made to�exacting�specifications�by�our�fabrication teamHigh quality American wire�rope�with�flemish�eye�splices�and�mechanically swaged steel sleeves
• Individually tagged with rated capacities�per�OSHA�specifications
Item ID Wire Size
Vertical WLL (tons)
Choker WLL (tons)
Base Length (ft)
050D-S25T/0250X002 1/4” 0.65 0.48 2’
050D-S25T/0312X002 5/16” 1 0.74 2’
050D-S25T/0375X002 3/8” 1.4 1.1 2’
050D-S25T/0437X002 7/16” 1.9 1.4 2’
050D-S25T/0500X002 1/2” 2.5 1.9 2’
050D-S25T/0625X003 5/8” 3.9 2.9 3’
050D-S25T/0750X004 3/4” 5.6 4.1 4’
050D-S25T/0875X004 7/8” 7.6 5.6 4’
050D-S25T/1000X005 1” 9.8 7.2 5’
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
15
Wire Rope Slings
Grade 100 Alloy Chain Sling Working Load Limits (lbs)
Size Single Leg Double Leg / Single Basket Triple and Quad Leg / Double Basket
1/4” 4,300 7,400 6,100 4,300 11,200 9,100 6,4005/16” 5,700 9,900 8,100 5,700 14,800 12,100 8,5003/8” 8,800 15,200 12,400 8,800 22,900 18,700 13,2001/2” 15,000 26,000 21,200 15,000 39,000 31,800 22,5005/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,9003/4” 35,300 61,100 49,900 35,300 91,700 74,900 53,000
6090 60 60
30 30 3045 45 45
Wire Rope Bridle Slings
Bridle Slingswith
Single Part Body
2- Leg Bridle 3- Leg Bridle 4- Leg Bridle
RopeDia.(in)
Min Sling
Length
Eye Hook Cap.
OblongLinkDia.
OblongLinkDia.
OblongLinkDia.
1/4” 1’ 3” 1 1.1 .91 .65 1/2 1.7 1.4 .97 1/2 2.2 1.8 1.3 1/25/16” 1’ 6” 1 1.7 1.4 1.0 1/2 2.6 2.1 1.5 1/2 3.5 2.8 2.0 3/4
3/8” 1’ 8” 11/2 2.5 2.0 1.4 1/2 3.7 3.0 2.2 3/4 5.0 4.1 2.9 3/47/16” 1’ 10” 2 3.4 2.7 1.9 3/4 5.0 4.1 2.9 3/4 6.7 5.5 3.9 1
1/2” 2’ 3 4.4 3.6 2.5 3/4 6.6 5.4 3.8 1 8.8 7.1 5.1 19/16” 2’ 2” 41/2 5.5 4.5 3.2 3/4 8.3 6.8 4.8 1 11 9.0 6.4 11/4
5/8” 2’ 4” 41/2 6.8 5.5 3.9 1 10 8.3 5.9 11/4 14 11 7.8 11/2
3/4” 2’ 9” 7 9.7 709 5.6 11/4 15 12 8.4 11/2 19 16 11 13/4
7/8” 3’ 3” 11 13 11 7.6 11/4 20 16 11 11/2 26 21 15 21 ” 3’ 6” 11 17 14 9.8 11/2 26 21 15 13/4 34 28 20 21/4
11/8” 4’ 15 21 17 12 11/2 31 26 18 13/4 42 34 24 23/4
11/4” 4’ 6” 15 26 21 15 13/4 38 31 22 2 51 42 30 23/4
13/8” 5’ 22 31 25 18 13/4 46 38 27 21/4 - - - -11/2” 5’ 6” 22 37 30 21 2 55 45 32 21/4 - - - -13/4” 6’ 6” 30 49 40 28 21/4 - - - - - - - -
2” 8’ 37 63 52 37 23/4 - - - - - - - -
304560
304560
304560
6 X 1
9 EI
P, IW
RC6X
37 EI
P, IW
RC
Wire Rope SlingsRope
Dia.(in) Vertical Choker Vertical Basket Min Sling Length Standard
Eye Size Thimbled Eye Size
1/4” .65 .48 1.3 1’6” 2 x 4 7/8 x 15/8
5/16” 1.0 .74 2.0 1’9” 21/2 x 5 11/16 x 11/8
3/8” 1.4 1.1 2.9 2’0” 3 x 6 11/8 x 21/8
7/16” 1.9 1.4 3.9 2’3” 31/2 x 7 11/4 x 21/4
1/2” 2.5 1.9 5.1 2’6” 4 x 8 11/2 x 23/4
9/16” 3.2 2.4 6.4 2’9” 41/2 x 9 11/2 x 23/4
5/8” 3.9 2.9 7.8 3’0” 5 x 10 13/4 x 31/4
3/4” 5.6 4.1 11 3’6” 6 x 12 2 x 33/4
7/8” 7.6 5.6 15 4’0” 7 x 14 21/2 x 41/4
1 ” 9.8 7.2 20 4’6” 8 x 16 21/2 x 41/2
11/8” 12 9.1 24 5’0” 9 x 18 27/8 x 51/8
11/4” 15 11 30 5’6” 10 x 20 31/2 x 61/2
13/8” 18 13 36 6’0” 11 x 22 31/2 x 61/4
11/2” 21 16 42 7’0” 12 x 24 31/2 x 61/4
13/4” 28 21 57 8’0” 14 x 28 41/2 x 92” 37 28 73 9’0” 16 x 32 6 x 12
21/4” 44 35 89 10’0” 18 x 36 7 x 1421/2” 54 42 109 11’0” 20 x 40 -
2-Leg Bridle 3-Leg Bridle 4-Leg Bridle
• Premium wire rope bridles made to exacting specifications�by�our�fabrication team
• High quality alloy hardware is attached to wire rope with�flemish�eye�splices�and�mechanically swaged steel sleeves
• Individually tagged with rated capacities per OSHA specifications
• Available in Import or Domestic
1/4” 1’3” 1 1.1 .91 0.65 1/2 1.7 1.4 .97 1/2 2.2 1.8 1.3 1/2
5/16” 1’6” 1 1.7 1.4 1 1/2 2.6 2.1 1.5 1/2 3.5 2.8 2 3/4
3/8” 1’8” 11/2 2.5 2.0 1.4 1/2 3.7 3.0 2.2 3/4 5 4.1 2.9 3/4
7/16” 1’10” 2 3.4 2.7 1.9 3/4 5 4.1 2.9 3/4 6.7 5.5 3.9 1
1/2” 2’ 3 4.4 3.6 2.5 3/4 6.6 5.4 3.8 1 8.8 7.1 5.1 1
9/16” 2’2” 41/2 5.5 4.5 3.2 3/4 8.3 6.8 4.8 1 11 9 6.4 11/4
5/8” 2’4” 41/2 6.8 5.5 3.9 1 10 8.3 5.9 11/4 14 11 7.8 11/2
3/4” 2’9” 7 9.7 7.9 5.6 11/4 15 12 8.4 11/2 19 16 11 13/4
7/8” 3’3” 11 13 11 7.6 11/4 20 16 11 11/2 26 21 15 2
1” 3’6” 11 17 14 9.8 11/2 26 21 15 13/4 24 28 20 21/4
11/8” 4’ 15 21 17 12 11/2 31 26 18 13/4 42 34 24 23/4
11/4” 4’6” 15 26 21 15 13/4 38 31 22 2 51 42 30 23/4
13/8” 5’ 22 31 25 18 13/4 46 38 27 21/4 — — — —
11/2” 5’6” 22 37 30 21 2 55 45 32 21/4 — — — —
13/4” 6’6” 30 49 40 28 21/4 — — — — — — — —
2” 8’ 37 63 52 37 23/4 — — — — — — — —
6X19
EIP
, IW
RC
6X37
EIP
, IW
RC
Note: Length Tolerances: Single Part Wire Rope Slings - Standard length tolerance is plus or minus two rope diameters, or plus or minus 0.5% of the sling length, whichever us greater. The legs of bridle slings, or matched slings are normally held to within one rope diameter
Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°
Using slings at an angle can become deadly if that angle is not taken into consideration when selecting the sling to be used. The tension on each leg of the sling is increased as the angle of lift, from horizontal, decreases. It is most desirable for a sling to have a larger angle of lift, approaching 90°. Lifts with angles of less than 30° from horizontal are not recommended. If you can measure the angle of lift or the length and height of the sling as rigged, you can determine the properly rated sling for your lift.
Important Consideration - Before buying or using a sling, know as much as possible about the lift you will make to minimize the potential danger to personnel, product and property
16 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Chain Slings
Single
Grade 100 Alloy Chain Sling Working Load Limits (lbs)
Size Single Leg Double Leg / Single Basket Triple and Quad Leg / Double Basket
1/4” 4,300 7,400 6,100 4,300 11,200 9,100 6,4005/16” 5,700 9,900 8,100 5,700 14,800 12,100 8,5003/8” 8,800 15,200 12,400 8,800 22,900 18,700 13,2001/2” 15,000 26,000 21,200 15,000 39,000 31,800 22,5005/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,9003/4” 35,300 61,100 49,900 35,300 91,700 74,900 53,000
6090 60 60
30 30 3045 45 45
Wire Rope Bridle Slings
Bridle Slingswith
Single Part Body
2- Leg Bridle 3- Leg Bridle 4- Leg Bridle
RopeDia.(in)
Min Sling
Length
Eye Hook Cap.
OblongLinkDia.
OblongLinkDia.
OblongLinkDia.
1/4” 1’ 3” 1 1.1 .91 .65 1/2 1.7 1.4 .97 1/2 2.2 1.8 1.3 1/25/16” 1’ 6” 1 1.7 1.4 1.0 1/2 2.6 2.1 1.5 1/2 3.5 2.8 2.0 3/4
3/8” 1’ 8” 11/2 2.5 2.0 1.4 1/2 3.7 3.0 2.2 3/4 5.0 4.1 2.9 3/47/16” 1’ 10” 2 3.4 2.7 1.9 3/4 5.0 4.1 2.9 3/4 6.7 5.5 3.9 1
1/2” 2’ 3 4.4 3.6 2.5 3/4 6.6 5.4 3.8 1 8.8 7.1 5.1 19/16” 2’ 2” 41/2 5.5 4.5 3.2 3/4 8.3 6.8 4.8 1 11 9.0 6.4 11/4
5/8” 2’ 4” 41/2 6.8 5.5 3.9 1 10 8.3 5.9 11/4 14 11 7.8 11/2
3/4” 2’ 9” 7 9.7 709 5.6 11/4 15 12 8.4 11/2 19 16 11 13/4
7/8” 3’ 3” 11 13 11 7.6 11/4 20 16 11 11/2 26 21 15 21 ” 3’ 6” 11 17 14 9.8 11/2 26 21 15 13/4 34 28 20 21/4
11/8” 4’ 15 21 17 12 11/2 31 26 18 13/4 42 34 24 23/4
11/4” 4’ 6” 15 26 21 15 13/4 38 31 22 2 51 42 30 23/4
13/8” 5’ 22 31 25 18 13/4 46 38 27 21/4 - - - -11/2” 5’ 6” 22 37 30 21 2 55 45 32 21/4 - - - -13/4” 6’ 6” 30 49 40 28 21/4 - - - - - - - -
2” 8’ 37 63 52 37 23/4 - - - - - - - -
304560
304560
304560
6 X 1
9 EI
P, IW
RC6X
37 EI
P, IW
RC
Wire Rope SlingsRope
Dia.(in) Vertical Choker Vertical Basket Min Sling Length Standard
Eye Size Thimbled Eye Size
1/4” .65 .48 1.3 1’6” 2 x 4 7/8 x 15/8
5/16” 1.0 .74 2.0 1’9” 21/2 x 5 11/16 x 11/8
3/8” 1.4 1.1 2.9 2’0” 3 x 6 11/8 x 21/8
7/16” 1.9 1.4 3.9 2’3” 31/2 x 7 11/4 x 21/4
1/2” 2.5 1.9 5.1 2’6” 4 x 8 11/2 x 23/4
9/16” 3.2 2.4 6.4 2’9” 41/2 x 9 11/2 x 23/4
5/8” 3.9 2.9 7.8 3’0” 5 x 10 13/4 x 31/4
3/4” 5.6 4.1 11 3’6” 6 x 12 2 x 33/4
7/8” 7.6 5.6 15 4’0” 7 x 14 21/2 x 41/4
1 ” 9.8 7.2 20 4’6” 8 x 16 21/2 x 41/2
11/8” 12 9.1 24 5’0” 9 x 18 27/8 x 51/8
11/4” 15 11 30 5’6” 10 x 20 31/2 x 61/2
13/8” 18 13 36 6’0” 11 x 22 31/2 x 61/4
11/2” 21 16 42 7’0” 12 x 24 31/2 x 61/4
13/4” 28 21 57 8’0” 14 x 28 41/2 x 92” 37 28 73 9’0” 16 x 32 6 x 12
21/4” 44 35 89 10’0” 18 x 36 7 x 1421/2” 54 42 109 11’0” 20 x 40 -
Double
Triple/Quad
Grade 100 Alloy Sling Working Load Limit Specs (lbs)
Type SOO Type SOS Type SOG Type SOF Type SSS Type SGG Type SSG
Type DOS Type DOG Type DOF
Type TOS Type TOG Type QOS Type QOG
1/4” 4300 7400 6100 4300 11,200 9,100 6,400
5/16” 5700 9900 8100 5700 14,800 12,100 8,500
3/8” 8800 15,200 12,400 8800 22,900 18,700 13,200
1/2” 15,000 26,00 21,200 15,000 39,000 31,800 22,500
5/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,900
3/4” 35,300 61,100 49,900 35,300 91,700 74,900 53,000
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
17
Synthetic Web Slings
Liftex® Flat Synthetic Pro-Edge® Web Slings HD�•��Made�with�flat�loop�eye�on�each�end• Can be used with vertical, basket & choker hitch
types• Pro-Edge® structural edge reinforcement and
abrasion resistance provides maximum sling service life
Item ID Width Ply Vertical WLL (lbs) Choker WLL (lbs)
319-EE1-901XXX 1” 1 1600 1280
319-EE2-901XXX 1” 2 3100 2480
319-EE4-901XXX 1” 4 6200 4960
319-EE1-902XXX 2” 1 3100 2480
319-EE2-902XXX 2” 2 6200 4960
319-EE4-902XXX 2” 4 12,400 9920
319-EE1-903XXX 3” 1 4,650 3720
319-EE2-903XXX 3” 2 9,300 7440
319-EE4-903XXX 3” 4 18,600 14,880
319-EE1-904XXX 4” 1 6,200 4,960
319-EE2-904XXX 4” 2 11,000 8800
319-EE4-904XXX 4” 4 22,000 17,600
Liftex® Endless Synthetic Pro-Edge® Web Slings HD • Continuous loop formed by joining ends of
webbing together with a load-bearing splice•��Design�allows�for�rotation�of�bearing�points• Can be used with vertical, basket & choker hitch
types• Pro-Edge® structural edge reinforcement and
abrasion resistance provides maximum sling service life
Item ID Width Ply Vertical WLL (lbs) Choker WLL (lbs)
319-EN1-901XXX 1” 1 2,200 1,760
319-EN2-901XXX 1” 2 6,200 4,960
319-EN3-901XXX 1” 3 9,300 7,440
319-EN1-902XXX 2” 1 6,200 4,960
319-EN2-902XXX 2” 2 12,400 9,920
319-EN3-902XXX 2” 3 18,600 14,880
Liftex Roundslings • Sling life is extended through rotation of bearing
points• Tighter choker with easier release• Reduce rigging weight and risk of injury
Item ID Color Vertical WLL (lbs) Choker WLL (lbs)
319-ENR01XXX Purple 2600 2100
319-ENR03XXX Yellow 8400 6700
319-ENR02XXX Green 5300 4200
319-ENR04XXX Tan 10,600 8500
319-ENR05XXX Red 13,200 10,600
319-ENR10XXX Orange 25,000 20,000
319-ENR11XXX Orange 53,000 42,400
319-ENR12XXX Orange 66,000 52,800
319-ENR13XXX Orange 90,000 72,000
Also available in Twisted Eye. Recommended when using slings in Choker Hitch
Instructions for Use: Roundslings
Synthetic slings are not be shortened at all, if a shorter sling is needed for a job use a different sling that is properly suited for the application.
Capacities for lifting slings are based on�a�Design�Factor�or�5:1.
18 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Wear Pads
Liftex® Quick-Sleeves Web Wear Pads Heavy Polyester • Abrasion resistant heavy poly protects slings• Hook and loop closure for quick install and
removal
Item ID Sleeve Width Fits Width
319-QSF02XXX-HP 4” 1” & 2”
319-QSF04XXX-HP 6” 3” & 4”
319-QSF06XXX-HP 8” 6”
Liftex® Quick-Sleeves Web Wear Pads Cordura • Abrasion resistant cordura protects slings• Hook and loop closure for quick install and
removal
Item ID Sleeve Width Fits Width
319-QSF02XXX-C 4” 1” & 2”
319-QSF04XXX-C 6” 3” & 4”
319-QSF06XXX-C 8” 6”
Liftex® Quick-Sleeves Roundsling Wear Pads Heavy Polyester • Abrasion resistant heavy poly protects slings• Hook and loop closure for quick install and
removal
Item ID Sleeve Width Fits Width
319-QSR02XXX-HP 6” 6”
319-QSR05XXX-HP 8” 8”
319-QSR07XXX-HP 10” 10”
319-QSR09XXX-HP 12” 12”
319-QSR11XXX-HP 14” 14”
319-QSR13XXX-HP 16” 16”
Liftex® Quick-Sleeves Roundsling Wear Pads Cordura • Abrasion resistant cordura protects slings• Hook and loop closure for quick install and
removal
Item ID Sleeve Width Fits Width
319-QSR02XXX-C 6” 6”
319-QSR05XXX-C 8” 8”
319-QSR07XXX-C 10” 10”
319-QSR09XXX-C 12” 12”
319-QSR11XXX-C 14” 14”
319-QSR13XXX-C 16” 16”
We offer a variety of specialty webbing products to suite your special application.
If you do not see what you are looking for please contact customer service to help determine the sling
to suite your CUSTOM SIZE and application needs.•� Custom�widths�and�lengths�can�be�produced�to�fit�your�specific�requirement• Custom Bridle/Multi-Leg slings are available with sling hooks•� Web�slings�can�be�fitting�with�triangle�and�choker�fittings�• Specialty eye treatments are available to reduce the wear in the eye area thereby extending sling life.• Wear resistant webbing is available for abrasive, environmentally or chemically harsh environments and applications. •� RFID�chips�are�optional�on�Pro-Edge�slings�
EMAIL US!cs@peaktrading.com
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
19
Chain
G30 Proof Coil Chain SC • Made From Low Carbon Steel•�Self�Colored�(SC)�finish•�Do�not�use�for�overhead�lifting
Item ID Size MBS (lbs) Available Put Ups
120-G30/0187-XXXX 3/16” 750 250’,750’1500’
120-G30/0250-XXXX 1/4” 1250 133’,400’800’
120-G30/0312-XXXX 5/16” 1900 92’,275’,550’
120-G30/0375-XXXX 3/8” 2650 66’,200’,400’
120-G30/0500-XXXX 1/2” 4,500 33’,100’,200’, 200’
120-G30/0625-XXXX 5/8” 6,900 75’,150’
120-G30/0750-XXXX 3/4” 10,600 100’
G30 Proof Coil Chain EG • Made From Low Carbon Steel•��Electoplated�finish•��Do�not�use�for�overhead�lifting
Item ID Size MBS (lbs) Available Put Ups
121-G30/0187-XXXX 3/16” 750 250’,750’1500’
121-G30/0250-XXXX 1/4” 1250 133’,400’800’
121-G30/0312-XXXX 5/16” 1900 92’,275’,550’
121-G30/0375-XXXX 3/8” 2650 66’,200’,400’
121-G30/0500-XXXX 1/2” 4500 33’,100’,200’
121-G30/0625-XXXX 5/8” 6900 75’,150’
G30 Proof Coil Chain HG • Imported, hot-dip galvanized and made from
low carbon steel• Excellent general-purpose chain of standard
commercial quality• G30 Proof Coil Chain is frequently used for
fabricating towing chains, binding chains, tie down chains and logging chains
•�Do�not�use�for�overhead�lifting
Item ID Size MBS (lbs) Available Put Ups
122-G30/0187-XXXX 3/16” 750 250’,750’1500’
122-G30/0250-XXXX 1/4” 1250 133’,400’800’
122-G30/0312-XXXX 5/16” 1900 92’,275’,550’
122-G30/0375-XXXX 3/8” 2650 66’,200’,400’
122-G30/0500-XXXX 1/2” 4500 33’,100’,200’
122-G30/0625-XXXX 5/8” 6900 75’,150’
122-G30/0750-XXXX 3/4” 10,600 100’
G30 Proof Coil Chain SS • Type 316 stainless steel• Offers superior strength and rust resistance•��Do�not�use�for�overhead�lifting
Item ID Size WLL (lbs) Available Put Ups
124-G30/316/0125-XXXX 1/8” 375 per ft, 1000’, 2000’, 2000’
124-G30/316/0187-XXXX 3/16” 1200 per ft, 500’, 750’, 1500’
124-G30/316/0250-XXXX 1/4” 2000 per ft, 400’, 800’
124-G30/316/0312-XXXX 5/16” 2850 per ft, 275’, 550’’
124-G30/316/0375-XXXX 3/8” 3550 per ft, 200’, 400’
124-G30/316/0500-XXXX 1/2” 6500 per ft, 100’, 200’
G70 Transport Chain YC • Imported Transport Chain with a yellow chromate�finish
• Made from heat treated carbon steel•��Do�not�use�for�overhead�lifting
Item ID Size WLL (lbs) Available Put Ups
123-G70/0250-XXXX 1/4” 3150 133’, 400’, 800’
123-G70/0312-XXXX 5/16” 4700 92’, 275’, 550’
123-G70/0375-XXXX 3/8” 6600 66’, 200’, 400’
123-G70/0625-XXXX 1/2” 11,300 33’, 100’, 200’
123-G70/0625-XXXX 5/8” 15,800 75’, 150’
Crosby® G100 Lifting Chain Alloy• Alloy Steel• Heat Treated• Finish – Black rust preventative coating• Proof Tested at 2 times the Working Load�Limit�with�certification
Item ID Size WLL (lbs) Put Up (ft) Weight
307-272710-000 1/4” 4300 Per ft 0.73 lbs
307-273710 1/4” 4300 500 376.00 lbs
307-273729-000 5/16” 5700 Per ft 1.03 lbs
307-273729 5/16” 5700 500 565.00 lbs
307-273738-000 3/8” 8800 Per ft 1.40 lbs
307-273738 3/8” 8800 500 740.00 lbs
307-273747-000 1/2” 15,000 Per ft 2.60 lbs
307-273747 1/2” 15,000 300 747.00 lbs
307-273756-000 5/8” 22,600 Per ft 3.38 lbs
307-273756 5/8” 22,600 200 757.00 lbs
307-273858 3/4” 35,300 100 584.00 lbs
307-273876 1” 59,700 75 1010.00 lbs
Double Loop Chain EG• Ideal for playground and gymnasium
equipment, farm and animal chain• Low Carbon Steel• Electro Galvanized Finish
Item ID Size MBS (lbs) Put Up (ft) Weight
126-DL03-0100 #3 90 100’ 5.75 lbs
126-DL2/0-0250 2/0 255 250’ 44.00 lbs
Single Jack Chain EG•��Ideal�for�fixture�and�novelty�suspension,�
and/or general utility• Low Carbon Steel• Electro Galvanized, SC Finish
Item ID Size MBS (lbs) Put Up (ft) Weight
126-SJ06-0100 #6 95 100’ 35.00 lbs
126-SJ08-0250 #8 60 250’ 52.00 lbs
126-SJ10-0250 #10 47 250’ 38.00 lbs
126-SJ12-0250 #12 29 250’ 24.00 lbs
20 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Turnbuckles
Hook & Hook Turnbuckles•��Drop�forged• Hot dip galvanized
Item ID Size Take-up Closed OAL (in)
WLL (lbs) Weight
115-TBHH0250X04 1/4” 4” 8.25” 400 0.30 lbs
115-TBHH0312X04.5 5/16” 4-1/2” 9.56” 700 0.53 lbs
115-TBHH0375X06 3/8” 6” 11.88” 1000 0.75 lbs
115-TBHH0500X06 1/2” 6” 13.30” 1500 1.50 lbs
115-TBHH0500X09 1/2” 9” 16.30” 1500 1.80 lbs
115-TBHH0500X12 1/2” 12” 19.30” 1500 2.19 lbs
115-TBHH0625X06 5/8” 6” 15.50” 2250 2.75 lbs
115-TBHH0625X09 5/8” 9” 18.50” 2250 3.00 lbs
115-TBHH0625X12 5/8” 12” 21.50” 2250 3.50 lbs
115-TBHH0750X06 3/4” 6” 17.00” 3000 3.75 lbs
115-TBHH0750X09 3/4” 9” 20.00” 3000 4.50 lbs
115-TBHH0750X12 3/4” 12” 23.00” 3000 5.75 lbs
115-TBHH0750X18 3/4” 18” 29.00” 3000 7.00 lbs
115-TBHH0875X12 7/8” 12” 24.63” 4000 9.35 lbs
115-TBHH0875X18 7/8” 18” 30.63” 4000 10.25 lbs
115-TBHH1000X06 1” 6” 20.63” 5000 11.10 lbs
115-TBHH1000X12 1” 12” 26.63” 5000 12.00 lbs
Eye & Hook Turnbuckles•��Drop�forged• Hot dip galvanized
Item ID Size Take-up Closed OAL (in) WLL (lbs) Weight
115-TBEH0250X04 1/4” 4” 8.25” 400 0.30 lbs
115-TBEH0312X04.5 5/16” 4-1/2” 9.56” 700 0.53 lbs
115-TBEH0375X06 3/8” 6” 11.88” 1000 0.75 lbs
115-TBEH0500X06 1/2” 6” 13.30” 1500 1.60 lbs
115-TBEH0500X09 1/2” 9” 16.30” 1500 1.82 lbs
115-TBEH0500X12 1/2” 12” 19.30” 1500 2.18 lbs
115-TBEH0625X06 5/8” 6” 15.50” 2250 2.71 lbs
115-TBEH0625X09 5/8” 9” 18.50” 2250 2.84 lbs
115-TBEH0625X12 5/8” 12” 21.50” 2250 3.67 lbs
115-TBEH0750X06 3/4” 6” 17.00” 3000 3.75 lbs
115-TBEH0750X09 3/4” 9” 20.00” 3000 4.50 lbs
115-TBEH0750X12 3/4” 12” 23.00” 3000 5.75 lbs
115-TBEH0750X18 3/4” 18” 29.00” 3000 7.25 lbs
115-TBEH0875X12 7/8” 12” 24.63” 3000 8.38 lbs
115-TBEH0875X18 7/8” 18” 30.63” 4000 10.25 lbs
115-TBEH1000X06 1” 6” 20.63” 4000 11.10 lbs
115-TBEH1000X12 1” 12” 26.63” 5000 12.00 lbs
Eye & Eye Turnbuckles •��Drop�forged• Hot dip galvanized
Item ID Size Take-up Closed OAL (in)
WLL (lbs) Weight
115-TBEE0250X04 1/4” 4” 8.25” 500 0.30 lbs
115-TBEE0312X04.50 5/16” 4-1/2” 9.56” 800 0.50 lbs
115-TBEE0375X06 3/8” 6” 11.88” 1200 0.75 lbs
115-TBEE0500X06 1/2” 6” 13.31” 2200 1.46 lbs
115-TBEE0500X09 1/2” 9” 16.31” 2200 1.75 lbs
115-TBEE0500X12 1/2” 12” 19.31” 2200 2.19 lbs
115-TBEE0625X06 5/8” 6” 15.50” 3500 2.63 lbs
115-TBEE0625X09 5/8” 9” 18.50” 3500 3.00 lbs
115-TBEE0625X12 5/8” 12” 21.50” 3500 3.50 lbs
115-TBEE0750X06 3/4” 6” 17.00” 5200 4.25 lbs
115-TBEE0750X09 3/4” 9” 20.00” 5200 5.00 lbs
115-TBEE0750X12 3/4” 12” 23.00” 5200 5.46 lbs
115-TBEE0750X18 3/4” 18” 29.00” 5200 7.25 lbs
115-TBEE0875X12 7/8” 12” 24.63” 7200 8.88 lbs
115-TBEE0875X18 7/8” 18” 30.63” 7200 10.25 lbs
115-TBEE1000X06 1” 6” 20.63” 10,000 11.10 lbs
115-TBEE1000X12 1” 12” 26.63” 10,000 11.25 lbs
115-TBEE1000X18 1” 18” 32.63” 15,200 14.00 lbs
115-TBEE1000X24 1” 24” 38.63” 15,200 17.00 lbs
115-TBEE1250X12 1-1/4” 12” 29.88” 15,200 21.20 lbs
115-TBEE1250X18 1-1/4” 18” 35.88” 15,200 24.10 lbs
115-TBEE1250X24 1-1/4” 24” 41.88” 15,200 25.00 lbs
115-TBEE1500X12 1-1/2” 12” 30.50” 21,400 27.00 lbs
115-TBEE1500X18 1-1/2” 18” 36.50” 21,400 31.00 lbs
115-TBEE1500X24 1-1/2” 24” 42.50” 21,400 38.00 lbs
115-TBEE2000X24 2” 24” 51.70” 37,000 88.00 lbs
Stub & Stub Turnbuckles •��Drop�forged• Hot dip galvanized• Stub End Turnbuckles are not rated
Item ID Size Take-up Closed OAL (in)
WLL (lbs) Weight
115-TBSS0375X06 3/8” 6” 16.00” 1,200 0.75 lbs
115-TBSS0500X06 1/2” 6” 16.00” 2,200 1.25 lbs
115-TBSS0625X06 5/8” 6” 16.00” 3,500 2.11 lbs
115-TBSS0750X06 3/4” 6” 17.00” 5,200 3.27 lbs
115-TBSS0875X06 7/8” 6” 18.00” 7,200 4.78 lbs
115-TBSS1000X06 1” 6” 19.00” 10,000 6.36 lbs
115-TBSS1500X06 1-1/2” 6” 20.50” 21,000 15.00 lbs
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
21
Turnbuckles
Eye & Jaw Turnbuckles•��Drop�forged• Hot dip galvanized
Item ID Size Take-up Closed OAL (in)
WLL (lbs) Weight
115-TBEJ0250X04 1/4” 4” 8.29” 500 0.32 lbs
115-TBEJ0312X04.5 5/16” 4-1/2” 9.78” 800 0.47 lbs
115-TBEJ0375X06 3/8” 6” 11.88” 1200 0.76 lbs
115-TBEJ0500X06 1/2” 6” 13.31” 2200 1.50 lbs
115-TBEJ0500X09 1/2” 9” 16.31” 2200 1.75 lbs
115-TBEJ0500X12 1/2” 12” 19.25” 2200 2.20 lbs
115-TBEJ0625X06 5/8” 6” 15.50” 3500 2.65 lbs
115-TBEJ0625X09 5/8” 9” 18.50” 3500 3.00 lbs
115-TBEJ0625X12 5/8” 12” 21.50” 3500 3.78 lbs
115-TBEJ0750X06 3/4” 6” 17.00” 5200 4.50 lbs
115-TBEJ0750X09 3/4” 9” 20.00” 5200 5.00 lbs
115-TBEJ0750X12 3/4” 12” 21.50” 5200 5.76 lbs
115-TBEJ0750X18 3/4” 18” 27.19” 5200 7.50 lbs
115-TBEJ0875X12 7/8” 12” 22.34” 7200 9.00 lbs
115-TBEJ1000X18 1” 18” 30.34” 10,000 0.00 lbs
115-TBEJ1000X24 1” 24” 36.34” 10,000 16.80 lbs
115-TBEJ0875X18 7/8” 18” 28.34” 7200 10.25 lbs
115-TBEJ1000X06 1” 6” 18.34” 10,000 11.10 lbs
115-TBEJ1000X12 1” 12” 24.34” 10,000 12.00 lbs
115-TBEJ1250X12 1-1/4” 12” 26.82” 15,200 21.20 lbs
115-TBEJ1500X12 1-1/2” 12” 28.50” 21,400 27.00 lbs
115-TBEJ1250X18 1-1/4” 18” 32.82” 15,200 24.20 lbs
115-TBEJ1250X24 1-1/4” 24” 38.82” 15,200 28.00 lbs
115-TBEJ1500X18 1-1/2” 18” 34.50” 21,400 35.00 lbs
115-TBEJ1500X24 1-1/2” 24” 40.50” 21,400 44.00 lbs
Jaw & Jaw Turnbuckles•��Drop�forged• Hot dip galvanized
Item ID Size Take-up
Closed OAL (in)
WLL (lbs) Weight
115-TBJJ0250X04 1/4” 4” 8.29” 500 0.39 lbs
115-TBJJ0312X04.5 5/16” 4-1/2” 9.78” 800 0.54 lbs
115-TBJJ0375X06 3/8” 6” 11.88” 1200 0.81 lbs
115-TBJJ0500X06 1/2” 6” 13.31” 2200 1.57 lbs
115-TBJJ0500X09 1/2” 9” 16.31” 2200 1.95 lbs
115-TBJJ0500X12 1/2” 12” 19.31” 2200 2.18 lbs
115-TBJJ0625X06 5/8” 6” 15.50” 3500 2.90 lbs
115-TBJJ0625X09 5/8” 9” 18.50” 3500 3.35 lbs
115-TBJJ0625X12 5/8” 12” 21.50” 3500 4.00 lbs
115-TBJJ0750X06 3/4” 6” 17.00” 5200 4.30 lbs
115-TBJJ0750X09 3/4” 9” 20.00” 5200 4.50 lbs
115-TBJJ0750X12 3/4” 12” 23.00” 5200 5.88 lbs
115-TBJJ0750X18 3/4” 18” 29.00” 5200 7.53 lbs
115-TBJJ0875X12 7/8” 12” 24.63” 7200 8.63 lbs
115-TBJJ0875X18 7/8” 18” 30.63” 7200 10.25 lbs
115-TBJJ1000X06 1” 6” 20.63” 10,000 9.44 lbs
115-TBJJ1000X12 1” 12” 26.63” 10,000 11.65 lbs
115-TBJJ1000X18 1” 18” 32.63” 10,000 16.10 lbs
115-TBJJ1000X24 1” 24” 34.72” 10,000 17.00 lbs
115-TBJJ1250X12 1-1/4” 12” 25.34” 15,200 19.00 lbs
115-TBJJ1250X18 1-1/4” 18” 31.34” 15,200 26.35 lbs
115-TBJJ1250X24 1-1/4” 24” 37.34” 15,200 31.00 lbs
115-TBJJ1500X12 1-1/2” 12” 26.50” 21,400 27.00 lbs
115-TBJJ1500X18 1-1/2” 18” 32.50” 21,400 31.20 lbs
115-TBJJ1500X24 1-1/2” 24” 38.50” 21,400 38.20 lbs
115-TBJJ2000X24 2” 24” 50.75” 37,000 198.00 lbs
Turnbuckles
HOOK & HOOK EYE & HOOK EYE & EYE
EYE & JAW JAW & JAW STUB & STUB
22 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Shackles
Screw Pin Anchor Shackles• Forged with alloy pins• Meets the performance requirements of Federal�Specification�RR-C-271D�Type�IVA, Grade A, Class 1, except for those provisions required of the contractor
• Working load limit permanently shown on every shackle
Item ID Size WLL (tons) Weight
115-SHACKSPA0187 3/16” 0.5 0.06 lbs
115-SHACKSPA0250 1/4” 0.5 0.10 lbs
115-SHACKSPA0312 5/16” 0.75 0.19 lbs
115-SHACKSPA0375 3/8” 1 0.31 lbs
115-SHACKSPA0437 7/16” 1.5 0.38 lbs
115-SHACKSPA0500 1/2” 2 0.72 lbs
115-SHACKSPA0625 5/8” 3.25 1.37 lbs
115-SHACKSPA0750 3/4” 4.75 2.35 lbs
115-SHACKSPA0875 7/8” 6.5 3.50 lbs
115-SHACKSPA1000 1” 8.5 5.03 lbs
115-SHACKSPA1125 1-1/8” 9.5 7.00 lbs
115-SHACKSPA1250 1-1/4” 12 9.50 lbs
115-SHACKSPA1375 1-3/8” 13.5 13.53 lbs
115-SHACKSPA1500 1-1/2” 17 17.20 lbs
115-SHACKSPA1750 1-3/4” 25 27.78 lbs
115-SHACKSPA2000 2” 35 45.00 lbs
115-SHACKSPA2500 2-1/2” 55 86.00 lbs
Round Pin Anchor Shackles• Forged with alloy pins• Meets the performance requirements of Federal Specification�RR-C-271D�Type�IVA,�Grade�A,�Class�1, except for those provisions required of the contractor
• Working load limit permanently shown on every shackle
Item ID Size WLL (tons) Weight
115-SHACKRPA0187 3/16” 0.33 0.15 lbs
115-SHACKRPA0250 1/4” 0.5 0.15 lbs
115-SHACKRPA0312 5/16” 0.75 0.20 lbs
115-SHACKRPA0375 3/8” 1 0.29 lbs
115-SHACKRPA0437 7/16” 1.5 0.38 lbs
115-SHACKRPA0500 1/2” 2 0.75 lbs
115-SHACKRPA0625 5/8” 3.25 0.00 lbs
115-SHACKRPA0750 3/4” 4.75 2.00 lbs
115-SHACKRPA0875 7/8” 6.5 0.00 lbs
115-SHACKRPA1000 1” 8.5 5.32 lbs
115-SHACKRPA1125 1-1/8” 9.5 7.00 lbs
Bolt Type Anchor Shackles• Bolt Type Anchor Shackle with thin head
bolt - nut with cotter pin• Forged with alloy pins• Meets the performance requirements of Federal�Specification�RR-C-271D�Type�IVA, Grade A, Class 3, except for those provisions required of the contractor
• Working load limit permanently shown on every shackle. Hot dip galvanized
Item ID Size WLL (tons) Weight
115-SHACKBTA0250 1/4” 0.5 0.17 lbs
115-SHACKBTA0312 5/16” 0.75 0.22 lbs
115-SHACKBTA0375 3/8” 1 0.40 lbs
115-SHACKBTA0437 7/16” 1.5 0.48 lbs
115-SHACKBTA0500 1/2” 2 0.79 lbs
115-SHACKBTA0625 5/8” 3.25 1.54 lbs
115-SHACKBTA0750 3/4” 4.75 2.53 lbs
115-SHACKBTA0875 7/8” 6.5 3.95 lbs
115-SHACKBTA1000 1” 8.5 5.95 lbs
115-SHACKBTA1125 1-1/8” 9.5 7.00 lbs
T304 SS Screw Pin Anchor Shackles• Type 304 Stainless Steel Screw Pin
Anchor Shackle meets the performance requirements�of�Federal�Specification�RR-C-271D,�Type�IVA,�Class�2
• Forged with alloy pins• Meets the performance requirements of Federal�Specification�RR-C-271D�Type�IVA,�Grade A, Class 3, except for those provisions required of the contractor
• Working load limit permanently shown on every shackle. Hot dip galvanized
Item ID Size WLL (tons Weight
116-304-SHACKSPA0187 3/16” 0.33 0.04 lbs
116-304-SHACKSPA0250 1/4” .5 0.12 lbs
116-304-SHACKSPA0312 5/16” .75 0.18 lbs
116-304-SHACKSPA0375 3/8” 1 0.31 lbs
116-304-SHACKSPA0437 7/16” 1.5 0.44 lbs
116-304-SHACKSPA0500 1/2” 2 0.70 lbs
116-304-SHACKSPA0625 5/8” 3.25 1.00 lbs
116-304-SHACKSPA0750 3/4” 4.75 1.67 lbs
116-304-SHACKSPA0875 7/8” 6.5 2.53 lbs
116-304-SHACKSPA1000 1” 8.5 5.50 lbs
116-304-SHACKSPA1125 1-1/8” 9.5 6.00 lbs
Also available in Type 316 stainless steel
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
23
Eye Hoist / Grab Hooks
Eye Hoist Hooks Carbon• Our Carbon Eye Hoist Hooks are quenched and
tempered to give maximum strength
Item ID WLL (tons) Weight
115-HKEHC0.75TL 0.75 0.62 lbs
115-HKEHC01TL 1 0.82 lbs
115-HKEHC01.5TL 1.5 1.45 lbs
115-HKEHC02TL 2 2.00 lbs
115-HKEHC03TL 3 4.25 lbs
115-HKEHC05TL 5 8.30 lbs
115-HKEHC07.5TL 7.5 15.12 lbs
115-HKEHC10TL 10 21.60 lbs
115-HKEHC15TL 15 39.50 lbs
Eye Hoist Hooks Alloy• Our Alloy Eye Hoist Hooks are quenched
and tempered to give maximum strength
Item ID WLL (tons) Weight
115-HKEHA01TL 1 0.60 lbs
115-HKEHA01.5TL 1.5 0.90 lbs
115-HKEHA02TL 2 1.45 lbs
115-HKEHA03TL 3 2.00 lbs
115-HKEHA04.5TL 4.5 4.30 lbs
115-HKEHA05TL 5 5.00 lbs
115-HKEHA07TL 7 8.30 lbs
115-HKEHA11TL 11 15.12 lbs
115-HKEHA15TL 15 21.60 lbs
Clevis Grab Hooks G43• Hot forged, heat treated and tempered•��Designed�for�use�with�welded�chain• Not recommended for overhead lifting sling
applications
Item ID Size Type WLL (lbs) Weight
115-HKCG43/250EG 1/4” Zinc Plated 2600 0.34 lbs
115-HKCG43/250SC 1/4” Self-colored 2600 0.34 lbs
115-HKCG43/312EG 5/16” Zinc Plated 3900 0.62 lbs
115-HKCG43/312SC 5/16” Self-colored 3900 0.64 lbs
115-HKCG43/375EG 3/8” Zinc Plated 5400 1.00 lbs
115-HKCG43/375SC 3/8” Self-colored 5400 1.00 lbs
115-HKCG43/500EG 1/2” Zinc Plated 9200 2.35 lbs
115-HKCG43/500SC 1/2” Self-colored 9200 2.35 lbs
Clevis Grab Hooks G70• Hot forged, heat treated and tempered•��Designed�specifically�for�transport�grade�70�chain• Note: Not recommended for overhead lifting sling
applications
Item ID Size WLL (lbs) Weight
115-HKCG70/250YC 1/4” 3150 0.36 lbs
115-HKCG70/312YC 5/16” 4700 0.62 lbs
115-HKCG70/375YC 3/8” 6600 1.00 lbs
115-HKCG70/500YC 1/2” 11,300 2.35 lbs
MONTHLY SPECI ALS
We have monthly Sales & Promotions! EMAIL US
at cs@peaktrading.com to get on our Email & Fax lists
24 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Clevis Slip Hooks / Pear Links
Clevis Slip Hooks G43• Wide throat for shackles,
chain tied loads• For use with Grade 30 proof
coil or grade 40 high test chain
• Not recommended for overhead lifting
• ‘L’ - Latch type
Item ID Size WLL (lbs) Weight
115-HKCS43/250EG 1/4” 1950 0.58 lbs
115-HKCS43/250EGL 1/4” 1950 0.58 lbs
115-HKCS43/312EG 5/16” 2875 0.86 lbs
115-HKCS43/312EGL 5/16” 2875 0.86 lbs
115-HKCS43/375EG 3/8” 4000 1.21 lbs
115-HKCS43/375EGL 3/8” 4000 1.21 lbs
115-HKCS43/500EG 1/2” 6500 2.20 lbs
115-HKCS43/500EGL 1/2” 6500 2.85 lbs
Clevis Slip Hooks G70• Wide throat for shackles, chain tied loads• For use with Grade 70
Transport Chain• Not recommended for
overhead lifting• ‘L’ - Latch type
Item ID Size WLL (lbs) Weight
115-HKCS70/250YC 1/4” 3150 0.50 lbs
115-HKCS70/250YCL 1/4” 3150 0.58 lbs
115-HKCS70/312YC 5/16” 4700 0.91 lbs
115-HKCS70/312YCL 5/16” 4700 0.91 lbs
115-HKCS70/375YC 3/8” 6600 1.61 lbs
115-HKCS70/375YCL 3/8” 6600 1.61 lbs
115-HKCS70/500YC 1/2” 11,300 2.80 lbs
115-HKCS70/500YCL 1/2” 11,300 3.00 lbs
Pear Links Carbon Import SC• 100% Proof Tested• Carbon Steel• Quenched and Tempered
Item ID Size WLL (lbs) Weight
115-PL0375 3/8” 1800 0.25 lbs
115-PL0500 1/2” 2900 0.55 lbs
115-PL0625 5/8” 4200 1.12 lbs
115-PL0750 3/4” 6000 1.90 lbs
115-PL0875 7/8” 8300 2.70 lbs
115-PL1000 1” 10,800 4.60 lbs
Master Links• 100% Proof Tested•��Drop�Forged�Using�Special�Bar�Quality�
Alloy Steel• Quenched and Tempered
Item ID Size WLL (lbs) Weight
115-ML0500 1/2” 2900 0.84 lbs
115-ML0625 5/8” 4200 1.52 lbs
115-ML0750 3/4” 12,300 2.20 lbs
115-ML1000 1” 20,300 5.00 lbs
115-ML1250 1-1/4” 36,000 9.10 lbs
115-ML1500 1-1/2” 54,300 16.25 lbs
115-ML1750 1-3/4” 84,900 26.15 lbs
115-ML2000 2” 102,600 38.05 lbs
VISIT OUR WEBSITE...www.peaktrading.comTo find our complete line of
RIGGING HARDWARE
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
25
Connecting Links
Eye Nuts• Made of high quality drop forged steel• Loads are based on a safety factor of 5
to 1 Note: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud
Item ID Size Tap Size WLL (lbs) Weight
115-EYENUT0250/312 1/4” 5/16” 850 0.10 lbs
115-EYENUT0312/375 5/16” 3/8” 1250 0.16 lbs
115-EYENUT0375/500 3/8” 1/2” 2250 0.28 lbs
115-EYENUT0500/625 1/2” 5/8” 3600 0.60 lbs
115-EYENUT0625/750 5/8” 3/4” 5200 1.00 lbs
115-EYENUT0750/875 3/4” 7/8” 7200 1.70 lbs
115-EYENUT0750/1000 3/4” 1” 7200 1.60 lbs
115-EYENUT0875/1000 7/8” 1” 10,000 2.75 lbs
115-EYENUT1000/1000 1” 1” 10,000 3.85 lbs
Connecting Links• Electro Galvanized• Commercial grade
Item ID Size Material WLL (lbs) Weight
115-CLINK187EG 3/16” Zinc Plated 800 0.03 lbs
115-CLINK250EG 1/4” Zinc Plated 1325 0.06 lbs
115-CLINK312EG 5/16” Zinc Plated 1950 0.10 lbs
115-CLINK375EG 3/8” Zinc Plated 2750 0.17 lbs
115-CLINK500EG 1/2” Zinc Plated 4750 0.36 lbs
115-CLINK625EG 5/8” Zinc Plated 7250 0.70 lbs
Lap Links• Commercial grade
Item ID Size Material WLL (lbs) Weight
115-LLINK125 1/8” Zinc Plated 120 0.20 lbs
115-LLINK187 3/16” Zinc Plated 240 0.03 lbs
115-LLINK250 1/4” Zinc Plated 400 0.06 lbs
115-LLINK312 5/16” Zinc Plated 950 0.10 lbs
115-LLINK375 3/8” Zinc Plated 1250 0.22 lbs
115-LLINK500 1/2” Zinc Plated 1525 0.54 lbs
Hammerlocks • Commercial grade
Item ID Size WLL (lbs) Weight
115-GR80HL281 9/32” 3500 0.02 lbs
115-GR80HL375 3/8” 7100 0.08 lbs
115-GR80HL200 1/2” 12,000 0.17 lbs
Cold Shuts • Commercial grade
Item ID Size Material WLL (lbs) Weight
115-CSHUT187 3/16” Zinc Plated 750 0.02 lbs
115-CSHUT250 1/4” Zinc Plated 1250 0.08 lbs
115-CSHUT312 5/16” Zinc Plated 1900 0.17 lbs
115-CSHUT375 3/8” Zinc Plated 3500 0.23 lbs
115-CSHUT500 1/2” Zinc Plated 3500 0.51 lbs
Oval Quick Links• Made from mild stee• Zinc Plated
Item ID Size WLL (lbs) Weight
115-QL125 1/8” 220 0.02 lbs
115-QL187 3/16” 400 0.05 lbs
115-QL250 1/4” 880 0.07 lbs
115-QL312 5/16” 1760 0.16 lbs
115-QL375 3/8” 2200 0.29 lbs
115-QL500 1/2” 2860 0.48 lbs
115-QL562 9/16” 3300 0.77 lbs
115-QL625 5/8” 4000 1.10 lbs
26 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Connecting Links
Wide Jaw Quick Links• Made from mild steel• Zinc plated•��Do�not�use�for�lifting
Item ID Size WLL (lbs) Weight
115-QLW125 1/8” 1102 0.04 lbs
115-QLW187 3/16” 3086 0.06 lbs
115-QLW250 1/4” 880 0.09 lbs
115-QLW312 5/16” 1760 0.10 lbs
115-QLW375 3/8” 1760 0.30 lbs
SS Oval Quick Links• Made from Type 316 stainless steel•��Do�not�use�for�lifting
Item ID Size WLL (lbs) Weight
116-316-QL125 1/8” 200 0.02 lbs
116-316-QL187 3/16” 800 0.05 lbs
116-316-QL250 1/4” 1200 0.07 lbs
116-316-QL312 5/16” 2000 0.16 lbs
116-316-QL375 3/8” 3500 0.29 lbs
116-316-QL500 1/2” 5000 0.48 lbs
116-316-QL562 9/16” 7700 0.77 lbs
S Hooks ZP• S Hooks ZP are used in low-working
load limit applications for attaching accessories to chain.
Item ID Size Shank Length Finish Weight
115-SHOOK062X01 1/16” 1” Zinc Plated 0.01 lbs
115-SHOOK125X01 1/8” 1” Zinc Plated 0.01 lbs
115-SHOOK156X01.75 5/32” 1-3/4” Zinc Plated 0.01 lbs
115-SHOOK250X02.25 1/4” 2-1/4” Zinc Plated 0.07 lbs
115-SHOOK281X02.50 9/32” 2-1/2” Zinc Plated 0.05 lbs
115-SHOOK312X02.875 5/16” 2-7/8” Zinc Plated 0.12 lbs
115-SHOOK187X01.75 3/16” 1-3/4” Zinc Plated 0.03 lbs
#2450 Springhooks• Zinc Plated• Commercial grade
Item ID Size Finish WLL (lbs) Weight
115-SPHK2450-187N 3/16” Zinc Plated 220 0.03 lbs
115-SPHK2450-250N 1/4” Zinc Plated 260 0.06 lbs
115-SPHK2450-312N 5/16” Zinc Plated 500 0.14 lbs
115-SPHK2450-375N 3/8” Zinc Plated 770 0.28 lbs
115-SPHK2450-500N 1/2” Zinc Plated 990 0.55 lbs
#2451 Springhooks w Eyes• Zinc Plated• Commercial grade
Item ID Size Finish WLL (lbs) Weight
115-SPHK2451-187E 3/16” Zinc Plated 220 0.03 lbs
115-SPHK2451-250E 1/4” Zinc Plated 260 0.06 lbs
115-SPHK2451-312E 5/16” Zinc Plated 500 0.14 lbs
115-SPHK2451-375E 3/8” Zinc Plated 770 0.28 lbs
SS #2450 Springhooks• 316 Stainless Steel• Commercial grade
Item ID Size Finish WLL (lbs) Weight
116-316-SPHK2450-187N 3/16” Stainless Steel 220 0.04 lbs
116-316-SPHK2450-250N 1/4” Stainless Steel 260 0.06 lbs
116-316-SPHK2450-375N 5/16” Stainless Steel 500 0.28 lbs
SS #2451 Springhooks w Eyes• 316 Stainless Steel• Formed and commercial grade
Item ID Size Finish WLL (tons) Weight
116-316-SPHK2451-187E 3/16” Stainless Steel 220 0.04 lbs
116-316-SPHK2451-250E 1/4” Stainless Steel 260 0.05 lbs
116-316-SPHK2451-312E 5/16” Stainless Steel 500 0.15 lbs
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
27
Eyebolts
Machinery Eye Bolts•��Drop�forged�steel• Heat treated
Item ID Size Shank Length WLL (lbs) Weight
115-MEB0250X01 1/4” 1” 500 0.06 lbs
115-MEB0312X01.125 5/16” 1-1/8” 900 0.06 lbs
115-MEB0437X01.375 7/16” 1-3/8” 2000 0.21 lbs
115-MEB0500X01.5 1/2” 1-1/2” 2600 0.38 lbs
115-MEB0625X01.75 5/8” 1-3/4” 4000 0.75 lbs
115-MEB0750X2.00 3/4” 2” 5000 0.88 lbs
115-MEB0875X02.25 7/8” 2-1/4” 7000 1.35 lbs
115-MEB1000X02.50 1” 2-1/2” 9000 2.35 lbs
Machinery Shoulder Eye Bolts•��Drop�forged�steel• Heat treated
Item ID Size Shank Length WLL (lbs) Weight
115-MEBSH0250X01 1/4” 1” 500 0.06 lbs
115-MEBSH0312X01.125 5/16” 1-1/8” 900 0.10 lbs
115-MEBSH0375X01.25 3/8” 1-1/4” 1600 0.16 lbs
115-MEBSH0437X01.375 7/16” 1-3/8” 2000 0.21 lbs
115-MEBSH0500X01.50 1/2” 1-1/2” 2400 0.30 lbs
115-MEBSH0562X01.625 9/16” 1-5/8” 3000 0.49 lbs
115-MEBSH0625X01.75 5/8” 1-3/4” 4000 0.74 lbs
115-MEBSH0750X02 3/4” 2” 5000 1.00 lbs
115-MEBSH0875X02.25 7/8” 2-1/4” 7000 1.73 lbs
115-MEBSH1000X02.50 1” 2-1/2” 9000 2.35 lbs
115-MEBSH1250X03.00 1-1/4” 3” 15,000 4.63 lbs
Forged Nut Eye Bolts•��Drop�forged�steel• Heat treated• Machine threaded
Item ID Size Length WLL (lbs) Weight
115-NEB0250X02 1/4” 2” 500 0.06 lbs
115-NEB0250X04 1/4” 4” 500 0.12 lbs
115-NEB0312X02.25 5/16” 2-1/4” 800 0.13 lbs
115-NEB0312X04.25 5/16” 4-1/2” 800 0.25 lbs
115-NEB0375X02.5 3/8” 2-1/2” 1200 0.24 lbs
115-NEB0375X04.5 3/8” 4-1/2” 1200 0.31 lbs
115-NEB0375X06 3/8” 6” 1200 0.43 lbs
115-NEB0500X03.25 1/2” 3-1/4” 2200 0.50 lbs
115-NEB0500X06 1/2” 6” 2200 0.62 lbs
115-NEB0500X08 1/2” 8” 2200 0.75 lbs
115-NEB0500X10 1/2” 10” 2200 0.88 lbs
115-NEB0500X12 1/2” 12” 2200 1.00 lbs
115-NEB0625X04 5/8” 4” 3500 0.95 lbs
115-NEB0625X06 5/8” 6” 3500 1.17 lbs
115-NEB0625X08 5/8” 8” 3500 1.29 lbs
115-NEB0625X10 5/8” 10” 3500 1.43 lbs
115-NEB0625X12 5/8” 12” 3500 1.66 lbs
115-NEB0625X15 5/8” 15” 3500 1.98 lbs
115-NEB0625X18 5/8” 18” 3500 2.19 lbs
115-NEB0625X21 5/8” 21” 3500 2.49 lbs
115-NEB0625X24 5/8” 24” 3500 2.82 lbs
115-NEB0750X04.5 3/4” 4-1/2” 5200 1.68 lbs
115-NEB0750X06 3/4” 6” 5200 1.80 lbs
115-NEB0750X08 3/4” 8” 5200 2.00 lbs
115-NEB0750X10 3/4” 10” 5200 2.38 lbs
115-NEB0750X12 3/4” 12” 5200 2.52 lbs
115-NEB0750X15 3/4” 15” 5200 2.75 lbs
115-NEB0875X05 7/8” 5” 7200 2.50 lbs
115-NEB0875X08 7/8” 8” 7200 2.96 lbs
115-NEB1000X06 1” 6” 10,000 3.01 lbs
115-NEB1000X09 1” 9” 10,000 3.83 lbs
115-NEB1000X12 1” 12” 10,000 4.50 lbs
115-NEB0875X06 7/8” 6” 7200 2.84 lbs
115-NEB0875X12 7/8” 12” 7200 3.87 lbs
Shoulder EyeboltThe threaded shank must protrude through the load�sufficiently�to�allow�full�engagement� of the nut.
If the eyebolt protrudes so far through the load that the nut can’t be tightened securely against the load, use properly sized washers to take up the excess space between the nut and the load.
Thickness of spacers must exceed this distance between the bottom of the load and the last thread of the eyebolt.
28 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Eyebolts
Forged Shoulder Eye Bolts•��Drop�Forged�Steel• Galvanized Finish• Heat Treated• Machine Threaded and assembled with
hex nuts tapped oversize
Item ID Size Length WLL (lbs) Weight
115-SHEB0250X02 1/4” 2” 500 0.07 lbs
115-SHEB0250X04 1/4” 4” 500 0.08 lbs
115-SHEB0312X02.25 5/16” 2-1/4” 800 0.13 lbs
115-SHEB0312X04.25 5/16” 4-1/4” 800 0.17 lbs
115-SHEB0375X02.5 3/8” 2-1/4” 1200 0.21 lbs
115-SHEB0375X04.5 3/8” 4-1/4” 1200 0.32 lbs
115-SHEB0375X06 3/8” 6” 1200 0.38 lbs
115-SHEB0500X03.25 1/2” 3-1/4” 2200 0.38 lbs
115-SHEB0500X06 1/2” 6” 2200 0.57 lbs
115-SHEB0500X08 1/2” 8” 2200 0.63 lbs
115-SHEB0625X04 5/8” 4” 3500 0.69 lbs
115-SHEB0625X06 5/8” 6” 3500 1.00 lbs
115-SHEB0750X04.5 3/4” 4-1/4” 5200 1.45 lbs
115-SHEB0750X06 3/4” 6” 5200 2.00 lbs
115-SHEB1000X06 1” 6” 10,000 3.75 lbs
115-SHEB1000X09 1” 9” 10,000 4.29 lbs
115-SHEB0500X10 1/2” 10” 2200 1.25 lbs
115-SHEB0500X12 1/2” 12” 2200 1.50 lbs
Shoulder Lag Eye Screws HG• Use for connecting hand lines, spiders webs to trees and more
on challenge courses• Not To be used for life support!• Hot dipped galvanized
Item ID Size Length WLL (lbs) Weight
115-SLES250X02 1/4” 2” 500 0.05 lbs
115-SLES312X02.25 5/16” 2-1/4” 800 0.06 lbs
115-SLES375X02.50 3/8” 2-1/2” 1200 0.20 lbs
115-SLES500X03.25 1/2” 3-1/4” 2200 0.42 lbs
115-SLES625X04 5/8” 4” 3500 0.65 lbs
115-SLES750X04.50 3/4” 4-1/2” 5200 1.20 lbs
Fixed Eye Single Wire Rope Block• Combination of bronze and steel bushings, designed
for high load and medium speed applications• Oiled Bushings for permanent self-lubrication
Item ID Max Cable Length (in) WLL (lbs) Style Weight
300-01568 3/16” 525 0.50 lbs
300-02068 3/16” 600 0.70 lbs
300-02068-SN 3/16” 600 Snatch Block 0.70 lbs
300-02568 1/4” 685 1.00 lbs
300-03068 1/4” 800 1.40 lbs
300-03068-SN 1/4” 800 Snatch Block 1.40 lbs
300-03568 5/16” 1550 3.10 lbs
300-03568-SN 5/16” 1550 Snatch Block 3.10 lbs
300-04068 3/8” 1700 3.50 lbs
300-04068-SN 3/8” 1700 Snatch Block 3.50 lbs
300-05068 3/8” 1850 5.10 lbs
Fixed Eye Double Wire Rope Block• Combination of bronze and steel bushings, designed
for high load and medium speed applications• Oiled Bushings for permanent self-lubrication
Item ID Max Cable Length (in) WLL (lbs) Style Weight
300-01568-2 3/16” 525 1.00 lbs
300-02068-2 3/16” 600 2.00 lbs
300-02068-2-SN 3/16” 600 Snatch Block 1.50 lbs
300-02568-2 1/4” 685 2.00 lbs
300-03068-2 1/4” 800 2.50 lbs
300-03068-2-SN 1/4” 800 Snatch Block 2.50 lbs
300-03568-2 5/16” 1550 5.00 lbs
300-03568-2-SN 5/16” 1550 Snatch Block 5.00 lbs
300-04068-2 3/8” 1700 6.40 lbs
300-04068-2-SN 3/8” 1700 Snatch Block 6.40 lbs
300-05068-2 3/8” 1850 9.30 lbs
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
29
Wire Rope Blocks
Flat Mount Single Wire Rope Block• Combination of bronze and steel bushings,
designed for high load and medium speed applications
• Oiled Bushings for permanent self-lubrication
Item ID Max Cable Length (in) WLL (lbs) Style Weight
300-01558 3/16” 525 0.30 lbs
300-02058 3/16” 600 0.50 lbs
300-02058-SN 3/16” 600 Snatch Block 0.50 lbs
300-02558 1/4” 685 2.00 lbs
300-03058 1/4” 800 1.00 lbs
300-03058-SN 1/4” 800 Snatch Block 1.00 lbs
300-03558 5/16” 1550 2.30 lbs
300-03558-SN 5/16” 1550 Snatch Block 2.30 lbs
300-04058 3/8” 1700 3.10 lbs
300-04058-SN 3/8” 1700 Snatch Block 3.10 lbs
300-05058 3/8” 1850 4.60 lbs
Flat Mount Double Wire Rope Block• Combination of bronze and steel bushings,
designed for high load and medium speed applications
• Oiled Bushings for permanent self-lubrication
Item ID Max Cable Length (in) WLL (lbs) Style Weight
300-01558-2 3/16” 525 0.50 lbs
300-02058-2 3/16” 600 1.00 lbs
300-02058-2-SN 3/16” 600 Snatch Block 1.00 lbs
300-02558-2 1/4” 685 2.00 lbs
300-03058-2 1/4” 800 2.50 lbs
300-03058-2-SN 1/4” 800 Snatch Block 2.50 lbs
300-03558-2 5/16” 1550 4.00 lbs
300-03558-2-SN 5/16” 1550 Snatch Block 4.00 lbs
300-04058-2 3/8” 1700 5.50 lbs
300-04058-2-SN 3/8” 1700 Snatch Block 5.50 lbs
300-05058-2 3/8” 1850 8.30 lbs
Swivel Eye Single Wire Rope Block• Combination of bronze and steel bushings, designed
for high load and medium speed applications• Oiled Bushings for permanent self-lubrication
Item ID Max Cable Length (in) WLL (lbs) Style Weight
300-01548 3/16” 525 0.50 lbs
300-02048 3/16” 600 0.70 lbs
300-02048-SN 3/16” 525 Snatch Block 0.70 lbs
300-02548 1/4” 685 1.00 lbs
300-03048 1/4” 800 1.40 lbs
300-03048-SN 1/4” 685 Snatch Block 1.00 lbs
300-03048-SN-5/16 5/16” 800 Snatch Block 1.40 lbs
300-03548 5/16” 1550 3.10 lbs
300-03548-SN 5/16” 800 Snatch Block 3.10lbs
300-03548-SN-3/8 3/8” 1550 Snatch Block 3.10 lbs
300-04048 3/8” 1550 3.60 lbs
300-04048-SN 3/8” 1550 Snatch Block 3.60 lbs
300-05048 3/8” 1850 5.20 lbs
Swivel Eye Double Wire Rope Block• Oiled Bushings for permanent self-
lubrication
Item ID Max Cable Length (in) WLL (lbs) Style Weight
300-01548-2 3/16” 525 1.00 lbs
300-02048-2 3/16” 600 1.50 lbs
300-02048-2-SN 3/16” 600 Snatch Block 1.50 lbs
300-02548-2 1/4” 685 2.50 lbs
300-03048-2 1/4” 800 2.50 lbs
300-03048-2-SN 1/4” 800 Snatch Block 1.40 lbs
300-03548-2 5/16” 1550 5.00 lbs
300-03548-2-SN 5/16” 1550 Snatch Block 5.00 lbs
300-04048-2 3/8” 1700 6.30 lbs
300-04048-2-SN 3/8” 1700 Snatch Block 6.30 lbs
300-05048-2 3/8” 1850 9.10 lbs
30 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Wire Rope Blocks
Swivel Hook Single Wire Rope Block• Stainless steel Hook latch• Combination of bronze and steel bushings, designed for
high load and medium speed applications• Oiled Bushings for permanent self-lubrication
Item ID Max Cable Length (in)
WLL (lbs) Style Weight
300-01578-SL 3/16” 525 0.50 lbs
300-02078-SL 3/16” 600 0.70 lbs
300-02078-SN-SL 3/16” 525 Snatch Block 0.70 lbs
300-02578-SL 1/4” 685 1.00 lbs
300-03078-SL 1/4” 800 1.40 lbs
300-03078-SN-SL 1/4” 685 Snatch Block 1.40 lbs
300-03578-SL 5/16” 1550 3.10 lbs
300-03578-SN 5/16” 800 Snatch Block 3.10 lbs
300-03578-SN-3/8 3/8” 1550 Snatch Block 3.10 lbs
300-04078-SL 3/8” 1700 3.80 lbs
300-04078-SN-SL 3/8” 1700 Snatch Block 3.80 lbs
300-05078-SL 3/8” 1850 5.30 lbs
300-05078-SN-SL 3/8” 1850 Snatch Block 5.30 lbs
Swivel Hook Double Wire Rope Block• Stainless Steel Hook Latch• Combination of bronze and steel bushings,
designed for high load and medium speed applications
• Oiled Bushings for permanent self-lubrication
Item ID Max Cable Length (in)
WLL (lbs) Style Weight
300-01578-2-SL 3/16” 525 1.00 lbs
300-02078-2-SL 3/16” 600 1.50 lbs
300-02078-2-SN-SL 3/16” 600 Snatch Block 1.50 lbs
300-02578-2-SL 1/4” 685 2.00 lbs
300-03078-2-SL 1/4” 800 2.50 lbs
300-03078-2-SN-SL 1/4” 800 Snatch Block 2.50 lbs
300-03578-2-SL 5/16” 1550 5.50 lbs
300-03578-2-SN 5/16” 1550 Snatch Block 5.50 lbs
300-04078-2-SL 3/8” 1700 6.50 lbs
300-04078-2-SN-SL 3/8” 1700 Snatch Block 6.50 lbs
300-05078-2-SL 3/8” 1850 9.30 lbs
Snatch Blocks Hook•��Equipped�with�bronze�bushings�and�grease�fitting• Swivel hook & latch connection
Item ID WLL (tons) Sheave Size (in) Wire Rope Size (in) Weight
340-6I-2T3 2 3” 5/16-3/8” 5.10 lbs
340-6I-4T4 4 4.5” 3/8-1/2” 13.25 lbs
340-6I-8T6 8 6” 5/8-3/4” 27.00 lbs
340-6I-8T8 8 8” 5/8-3/4” 36.00 lbs
340-6I-15T10 15 10” 3/4-7/8” 75.00 lbs
340-6I-15T8 15 8” 3/4-7/8” 60.00 lbs
Snatch Blocks Shackle• Screw pin shackles that attach quickly and securely to D-rings�or�boom�end
• Suitable for wire rope
Item ID WLL (tons) Sheave Size (in) Wire Rope Size (in) Weight
340-6I-SW2T 2 3” 5/16-3/8” 5.05 lbs
340-6I-SW4T 4 4.5” 3/8-1/2” 13.50 lbs
340-6I-SW8T 8 6” 5/8-3/4” 27.40 lbs
Snatch Blocks with Chain• All BA Products Snatch Blocks feature bronze�bushings�with�greased�fittings
• Easy opening side plates open without coming apart
• WARNING: Never Exceed the Working Load Limit.
Item ID WLL (tons) Sheave Size (in) Wire Rope Size (in) Weight
340-6I-2TSW30 2 3” 5/16-3/8” 8.23 lbs
340-6I-4TSW30 4 4” 3/8-1/2” 18.25 lbs
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
31
Blocks
Campbell® Single Sheave Wood Shell Block• Round Loose Hook “AF”•��Drop�Forged�Fittings• Galvanized Metal Parts
Item ID Sheave Size (in) Rope Size WLL (lbs) Weight
306-7205336 3” 3/8” 500 1.00lbs
306-7205436 4” 1/2” 1000 2.00 lbs
306-7205536 5” 5/8” 1200 2.50 lbs
306-7205636 6” 3/4” 1800 4.00 lbs
Campbell® Double Sheave Wood Shell Block• Round Loose Hook “AF”•��Drop�Forged�Fittings• Galvanized Metal Parts
Item ID Sheave Size (in) Rope Size WLL (lbs) Weight
306-7206836 3” 3/8” 800 3.00lbs
306-7206936 4” 1/2” 1400 3.00 lbs
306-7207036 5” 5/8” 1800 4.00 lbs
306-7207136 6” 3/4” 2500 6.50 lbs
Beam Clamps•��Reduces�flange�stress�by�distributing�the�load�away�from�the�flange�edge
• For Permanent or Temporary Mounting
Item ID WLL (tons) Flange Width Weight
115-BC-1 1 3-9” 10.13 lbs
115-BC-2 2 3 - 9” 10.13 lbs
115-BC-3 3 3.2-12.5” 21.79 lbs
115-BC-5 5 3.6-12.5” 25.48 lbs
For Pricing: Contact your Sales Rep or email us at cs@peaktrading.com
Campbell® Triple Sheave Wood Shell Block• Round Loose Hook “AF”•��Drop�Forged�Fittings• Galvanized Metal Parts
Item ID Sheave Size (in) Rope Size WLL (lbs) Weight
306-7208536 4” 1/2” 1800 4.00 lbs
306-7208636 5” 5/8” 2400 5.50lbs
306-7208736 6” 3/4” 3200 9.00 lbs
NoteAll blocks have a common iron bearing and a becket. Shackle or swivel hook, roller bearing, and self-lubricating bearing also available.
CALL US!800 952 7325
Questions?
EMAIL US!cs@peaktrading.com
32 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Swaging Tools
ARM® Swaging Tools Multi Cavity• Hand Operated• All models are supplied with go-no go
gauge
Item ID Size Weight
618-HSC-350 1/16-1/8” 2.43 lbs
618-HSC-600 1/16-3/16” 6.00 lbs
ARM® Swaging Tools Bench Style• Multi-compression jaws to swage• Bolts to your work bench and is excellent
for mass production of snares, drowner slides, cabled stakes, snare extension
Item ID Size Weight
618-HSC-600BB 1/16-3/16” 11.02 lbs
Locoloc® Swaging Tools Single Cavity• Has a single compression die for oval
and stop sleeve swaging
Item ID Size Length Weight
621-0-3/32 3/32” 20” 4.20 lbs
621-0-1/8 1/8” 20” 4.20 lbs
621-0-3/16 3/16” 20” 4.20 lbs
621-0-7/32 7/32” 28” 5.00 lbs
621-0-1/4 1/4” 28” 5.81 lbs
621-0-5/16 5/16” 28” 5.00 lbs
Locoloc® Swaging Tools Multi Cavity• Cuts up to 7/32” diameter• This Tool is for Copper and Aluminum
Sleeves Only
Item ID Length (in) Weight
621-1-SC 26” 6.50 lbs
Locoloc® Swaging Tools Bench Style• This Tool is for Copper and Aluminum
Sleeves Only
Item ID Length (in) Weight
621-1-BSC 22-1/2” 6.60 lbs
Locoloc® Swaging Tool Gauges• Proper swaging of Locoloc aluminum,
copper and stainless steel sleeves.• Locoloc Sleeve Gauges GA-1P will
measure all oval or stop sleeves used on 1/32”, 3/64”, 1/16”, 3/32”, 1/8”, 5/32”, and 3/16” oval and stop sleeves
Item ID Measures (in) Weight
621-GA-1P 1/32”, 3/64”, 1/16”, 3/32”, 1/8”, 5/32”, & 3/16”
0.13 lbs
621-GA-2P 7/32”, 1/4”, 9/32”, & 5/16” 0.12 lbs
Nicopress® #63 & #64 Swaging Tools• Nicopress® Nos. 63 and 64 Swaging
Tools are multiple sleeve-pressing groove hand tools
• The No. 63V-XPM has three grooves• The No. 64CGMP has four grooves
Item ID Size Weight
323-63V-XPM 1/8”, 5/32”, 3/16” 6.50 lbs
323-64-CGMP 1/16”, 3/32”, 1/8”, 5/32” 6.50 lbs
Nicopress® #51 Swaging Tools• Single sleeve-pressing groove for a
particular size of cable
Item ID Size Weight
323-51-MJ 3/32-7/32” 5.00 lbs
Nicopress® #3 Swaging Tools• Used for No. 18-13-G9 and No. 28-13-
G9 Oval Sleeves for 5/16” cable. Tool length is 33”
Item ID Size Weight
323-3-F6-950 1/4” 13.00 lbs
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
33
Swaging Tools
Nicopress® #10 & #300 Bench Tools• For cable sizes 1/8” through 5/32”
only, one press is made per splice•��Prices�Do�Not�Include�Heads�Heads�Are�
Sold Seperately
Item ID Model # Weight
323-300 300 19.00 lbs
323-510 510 6.00 lbs
Nicopress® Swaging Tool Heads• Nicopress® Tool heads are exclusively
for Nicopress brand tools
Item ID Size Weight
323-63V-XPMHEAD 1/8-3/16” 2.20 lbs
323-3-F6-950HEAD 1/4” 4.40 lbs
Locoloc® Swaging Tools Hydraulic• A hand swager, exerting 14 tons of pressure• A few strokes of handle bring the dies from wide�open�to�contact�with�the�fitting�to�be�swaged
• The internal valve automatically shifts from the low pressure pump stage to the high pressure compression stage
Item ID Length (in) Weight
621-#3-H 24” 15.00 lbs
Locoloc® HC-5010-R Swaging Tool•��Operates�in�confined�spaces�and�
accommodates one hand operation• 6 ton output• HC-5010-R comes with 1 carrying case, a
battery charger, two (2) TBP-80 Lithium Ion Batteries and a carrying strap. One battery can be used while the other is charging.�REPLACEABLE�DIES�-�Sold�Separately
Item ID Length (in) Weight
621-HC-5010-R 22” 8.75 lbs
Nicopress® 5606 Swaging Tool• Battery-powered• Jaws rotate 360°•��REPLACEABLE�DIES�-�Sold�Separately
Item ID Size Weight
323-5606 3/64” - 3/8” 17.60 lbs
Locoloc® Swaging Tool Kit• The Kit Includes: (1) 1SC Swaging tool w/
NoGo Gauge (1) Felco C7 Cable Cutter (100) 1/16, 3/32, 1/8, 5/32, 3/16 Swage Sleeves (100) 3/32, 1/8 Swage Stops
• Available with either aluminum or copper fittings
Item ID Material Weight
621-SWKITASL-1SC Aluminum 19.00 lbs
621-SWKITCSL-1SC Copper 32.00 lbs
Cable Alum & Copper SS
Diameter Oval Sleeves Stop Sleeves Oval Sleeves
3/64” 2 1 1
1/16” 2 1 1
3/32” 2 2 1
1/8” 3 2 2
5/32” 3 2 3
3/16” 4 2 4
7/32” 4 2 4
1/4” 4 3 5
9/32” 4 3 -
5/16” 5A/4C 3 -
3/8” - 3 -
All compressions must be gauged to assure maximum holding strength, and it is recommended that all assemblies should be proof tested�
*Only applies to Locoloc® Swaging Tools
NUMBER OF COMPRESSIONS
34 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
Swaging Tools
Locoloc® Dies for HC-3010, HC-5010• Heat treated steel• Each die includes top & bottom (die set)
and gauge
Item ID Size Weight
621-DI2-4 1/8” 0.22 lbs
621-DI2-6 3/16” 0.21 lbs
621-DI2-8 1/4” 0.19 lbs
Bolt-Chain Cutters Import• Jaws made of drop forged high-grade
alloy tool steel• Heat-treated, precision cutting edges
Item ID Capacity (in) Length (in) Jaw Type Weight
205-BOLTCUTTER18 5/16” 18” Center Cut 4.41 lbs
205-BOLTCUTTER24 3/8” 24” Center Cut 6.90 lbs
205-BOLTCUTTER30 1/2” 30” Center Cut 11.02 lbs
205-BOLTCUTTER36 5/8” 36” Center Cut 14.88 lbs
Felco® Wire Rope Cutters• Swiss made, these cable cutters are
recognized throughout the world for their precision manufacture and cutting capabilities
• Made from the highest quality case hardened tool steel, Felco’s proprietary tempering process ensures the hardest and longest lasting cutting blade surfaces
•��Plastic�coated�handles�provide�a�firm�comfortable grip
• All cutters are tested before leaving the factory
Item ID Length (in) Max Cut (in) Weight
746-C7 8” 3/16” 0.63 lbs
746-C9 13” 1/4” 1.50 lbs
746-C12 19” 3/8” 3.00 lbs
746-C16 23” 5/8” 5.00 lbs
746-C112 29” 1/2” 8.25 lbs
C7
C9
C12 & C16
C112
ARM® Wire Rope Cutters• Used for cutting 1/16 to 5/8 inch cable
Item ID Length (in) Weight
618-RC-8 3/16” 1.00lbs
618-RC-450 17-3/4” 4.00lbs
618-RC-800 31-1/2” 8.70lbs
RC-8
RC-450
RC-800
Nicopress® 6 Series Dies Copper•��Specifically�engineered�and�designed�to�
be used with Nicopress Copper Sleeves•��Nicopress�6�Series�Dies�come�with�top�
and bottom die (die set) and gauge
Item ID Weight
323-6-OVAL-B4 0.50 lbs
323-6-OVAL-C 1/16” 0.50 lbs
323-6-OVAL-M 1/8” 0.50 lbs
323-6-OVAL-X 3/16” 0.50 lbs
323-6-OVAL-F6 1/4” 0.50 lbs
Nicopress® 12 Series Dies Copper•��Specifically�engineered�and�designed�to�
be used with Nicopress Copper Sleeves•��Nicopress�12�Series�Dies�come�with�top�
and bottom die (die set) and gauge
Item ID Size Weight
323-12-OVAL-X 3/16” 0.50 lbs
323-12-OVAL-F6 1/4” 0.50 lbs
323-12-OVAL-G9 5/16” 0.50 lbs
323-12-OVAL-H5 3/8” 0.50 lbs
323-12-OVAL-K8 1/2” 0.50 lbs
Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.
35
Tie Down Equipment
2” Ratchet Straps w Flat Hooks• Standard webbing• Flat hooks on each end
Item ID Web Width (in) Length (ft) WLL (lbs) Weight
200-TDRA2X27/10000F 2” 27’ 3335 5.80 lbs
1” Ratchet Straps w Wire Hooks• Standard webbing• Wire hook on each end
Item ID Web Width (in) Length (ft) WLL (lbs) Weight
200-TDRA1X016/1000W 1” 16’ 1000 1.56 lbs
2” Ratchet Straps w Wire Hooks• Standard webbing• Wire hook on each end
Item ID Web Width (in) Length (ft) WLL (lbs) Weight
200-TDRA2X27/10000W 2” 27’ 3335 6.08 lbs
Lever Load Binders•��Powder�painted�finish
Item ID Size WLL (lbs) Take Up (in) Weight
200-LBLEVER250/312 1/4-5/16” 2600 3” 3.80 lbs
200-LBLEVER312/375 5/16-3/8” 5400 4.25” 7.02 lbs
200-LBLEVER375/500 3/8-1/2” 9200 4” 12.50 lbs
G70 Grab Grab Binder Chains • High quality import grade 70 chain and hooks• Assembled chain with (1) grab hook on each
end
Item ID Chain Size WLL (lbs) Base Length (ft)
200-BCG70GG312XXX 5/16” 4700 6’
200-BCG70GG375XXX 3/8” 6600 6’
G70 Slip Grab Binder Chains • High quality import grade 70 chain and hooks• Assembled chain with (1) slip hook and (1) grab
hook• Slip hook includes latch
Item ID Chain Size WLL (lbs) Base Length (ft)
200-BCG70SG375XXX 3/8” 6600 6’
200-BCG70SG312XXX 5/16” 4700 6’
Ratchet Load Binders•��Powder�painted�finish
Item ID Size WLL (lbs) Take Up (in) Weight
200-LBRATCHET312/375 5/16-3/8” 6600 8” 10.00 lbs
200-LBRATCHET375/500 3/8-1/2” 9200 8” 12.90 lbs
200-LBRATCHET500/625 1/2-5/8” 13,000 8” 14.55 lbs
VISIT OUR WEBSITE...www.peaktrading.comTo find our complete line of
TIE DOWN EQUIPMENT
Never exceed the Working Load Limit. Do not operate the binder while you or anyone else is on the load. When applying the binder, always position the load binder so the handle is tightened in a downward manner.
36 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.
3-Strand Rope
Nylon 3-Strand Rope • 3-Strand White Nylon Rope is one of the strongest�synthetic�fiber�ropes,�offering�superior�elasticity and excellent abrasion resistance
Item ID Size Color MBS (lbs) Available Put ups
166-3S0250WH-XXXX 1/4” White 1650 100, 600, 1200
166-3S0375WH-XXXX 3/8” White 3700 100, 600, 1200
166-3S0500WH-XXXX 1/2” White 6400 100, 600, 1200
166-3S0625WH-XXXX 5/8” White 10,400 100, 600, 1200
166-3S0750WH-XXXX 3/4” White 14,200 100, 600
166-3S1000WH-XXXX 1” White 25,000 100, 600
Poly Dac 3-Strand Rope • Perfect choice to use in combination with 5/8”
rope grab
Item ID Size Color MBS (lbs) Available Put ups
168-3S0500WH-XXXX 1/2” White 3,780 600, 1200
168-3S0625WH-XXXX 5/8” White 7200 600, 1200
168-3S0750WH-XXXX 3/4” White 7,650 600, 1200
168-3S0250WH-XXXX 1/4” White 1,300 600, 1200
168-3S0375WH-XXXX 3/8” White 2,881 600, 1200
168-3S1000WH-XXXX 1” White 17,000 600
Never exceed the Working Load Limit. Attachments must have at least the same working load limit as the rope used. Keep out from under a raised load. Destroy, rather than discard retired rope. Inspect rope frequently and store properly. Avoid overheating, shock loads, chemicals, rust and abrasion.
Avoid abrasion and unnecessary wear. Outer fibers as well as inner contribute to a rope’s strength. When outer fibers are worn by chafing or dragging, rough or gritty surfaces, the rope worn will become weakened.
Fiber Type Nylon Poly�Dac Manila
Strength Excellent Good Poor
Wet vs. Dry Strength 85% 100% 115%
Shock Load Ability Excellent Good Poor
Water Absorption 6% 0% 100%
Melting Point 480 °F 305 °F N/A
Abrasion Resistance Good Good Good
Resistance to Sun Good Good Good
Resistance to Rot Excellent Excellent Poor
Resistance to Acid Poor Good Poor
Flexing Endurance Excellent Good Poor
Storage Requirements Wet or Dry Wet or Dry Dry Only
Rope Fiber Information
Manila 3-Strand Rope • Premium grade with 36 min becker value.
Item ID Size Color MBS (lbs) Available Put ups
172-3S0250-XXXX 1/4” Natural 540 100, 600, 1200
172-3S0312-XXXX 5/16” Natural 900 600, 1200
172-3S0375-XXXX 3/8” Natural 1,215 100, 600, 1200
172-3S0500-XXXX 1/2” Natural 2,385 100, 600, 1200
172-3S0625-XXXX 5/8” Natural 3,960 100, 600, 1200
172-3S0750-XXXX 3/4” Natural 4,860 100, 600, 1200
172-3S0875-XXXX 7/8” Natural 6,930 600, 1200
172-3S1000-XXXX 1” Natural 8,100 100, 600, 1200
IMPORTANT – READ WARNINGS BEFORE USING All products are sold with the understanding that the purchaser is familiar with their safe use and correct application. Peak Trading Corporation assumes no
responsibility for the use or misapplication of any product it sells. Responsibility for design and use decisions rests with the user.
SAFETY WARNINGS RAISED LOADKeep out from under a raised load. Take notice of the recommendation from the National Safety Council Accident Prevention manual concerning all lifting operations:
All employees working with cranes or hoists or assisting in hooking or arranging a load should be in-structed to keep out from under the load. From a safety standpoint, one factor is paramount: Conduct all lifting operations in such a manner, that if there were an equip-ment failure, no personnel would be injured. This means keep out from under a raised load and keep out of the line of force of any load.
REGULAR INSPECTION Inspect products regularly for visible damage, cracks, wear, elongation, rust, etc. Protect all products from corrosion. No product can keep operating at its rated capacity indefi-nitely. Periodic inspections help determine when to replace a product and reduce rigging hazards. Keep inspection records to help pinpoint problems and to ensure periodic inspection intervals.
Frequency of inspection will depend on environmental conditions, application, storage of product prior to use, frequency of use, whether or not life, limb, or valuable property are at risk, etc. When in doubt, inspect products prior to each use. Carefully check each item for wear, de-formation, cracks, or elongation — a sure sign of imminent failure. Immediately withdraw such items from service. Rust damage is another potential hazard. When in doubt about the extent of corrosion or other damage, withdraw the items from service.
Destroy, rather than discard, items that have been judged defective. They might be used by someone not aware of the hazard of the defect.
IMPORTANT WARNINGSRemember that any product will break if abused, misused or overused. Therefore:• Never exceed the working load limit.• Match components properly.• Keep out from under a raised load.• Avoid shock loads.• Inspect products regularly.
WORKING LOAD LIMITSNever exceed the working load limit (WLL), safe working load (SWL), or rated capacity. The working load limit is the maximum load which should never be applied to the product, even when the product is new and when the load is uniformly applied - straight line pull only. Avoid side loading. All catalog ratings are based upon usual environmental conditions, and consideration must be given to unusual conditions such as high or low temperatures, chemical solutions or vapors, prolonged immersion in salt water, etc.. Such conditions or high-risk applications may necessitate reducing the working load capacity. Working load limit will not apply if product has been welded or otherwise modified.
MATCHING COMPONENTSComponents must match. Make certain that components such as hooks, links, shackles, etc., used with wire rope (or chain or cordage), are of suitable material and strength to provide adequate safety protection. Attachments must be properly installed and must have a working load limit at least equal to the products with which they are used. Remember that any chain is only as strong as its weakest link.
SHOCK LOADSAvoid impacting, jerking, or swinging of load – working load limit will not apply. A shock load is generally significantly greater than the static load. Avoid shock loads.
Wire Rope
Chain
• Stainless Steel • Galvanized • Bright • Aircraft Cable
• IWRC• Fiber Core• Cable Laid • Crane Cables
• PVC Coated • Strand• Specialty• Roll-Off Cables
• G30 Proof Coil • G43 High-Test• G70 Transport• G80 Alloy• G100 Alloy
• Jack• Binder• STAC• Stainless Steel• BBB
• Plastic• Aluminum• Tire• Tow• Weldless
• Cable Fittings • Stainless Steel• Gripples • Turnbuckles• Adjustable Clamps
• Strandvises• Eyebolts• Rapid Links• Beam Clamps • Hooks
• Shackles• Snaps• Swivels• Wire Rope Clips • Sheaves
• Bull Pins• Swage Tools• Erection Wrenches • Klien Pliers• Load Binders• Electric Hoists
• Haven Grips• Tool Bags• Bottle Jacks• Bolt Cutters• Come-A-Longs• Winches
• Griphoist• Wire Mesh Grip• Cable Cutters• Lineman Wrenches• Cable Pullers• Load Cells
• Polyester• Nylon• Dacron (poly)• Polypro• Sisal• Sash Cord
• Bungee Cord• Truck Rope• Cargo Nets• Safety Nets• Solid Braid• Double Braid
• Manila• 3-Strand• Theatrical Rope• Arborist Ropes• Dynamic Climbing• 12-Strand
• Conduit Assemblies• Miniature Assemblies
• Coated Cable Assemblies• Custom Assemblies
• Light Safety Cables• Security Cables• Lanyards• Cable Ladders
Hardware
Cable Assemblies
Rope Hoists and Tools
• Carabiners• Figure Eights• Ascenders• Descenders
• Harness Gear• Daisy Chains• Retrieval Winch
• Swivels• Pulleys• Gloves• Tripods
• Wire Rope Slings• Chain Slings• Nylon Slings
• Roundslings• Winches• Winch Bars
• Winch Straps• Rubber Straps• Ratchet Straps
• Full Body Harnesses• Ladder Systems• Vertical Lifelines• Anchor Systems
• Safety Glasses• Hardhats• Lanyards• Horizontal Lifelines
• Retractable Lifelines• Rope Grabs• Shock Absorbers
• Crane Blocks• Manilla Rope Blocks
• Sheaves• Swivels• Snatch Blocks
• Overhaul Balls• Spreader Bars• Block and Falls
Rope/Rescue Equipment
Lifting Slings and Tie Downs
Safety
Blocks and Accessories
Manufacturers We Carry (partial list)Block DivisionCaldwellCampbellChicago HardwareCMICoffingColumbus McKinnon
CrosbyDBI/SALAFelcoGrippleGriplockGunnebo JohnsonJET
Kinedyne Klein ToolsLift-AllLiftexOmega PacificPetzlNew England Ropes
NicopressSamson RopeSterling RopeSuncorWirecoYale Rope
SHOP ONLINE at www.peaktrading.com
Register! To see pricing instantly!
● In-stock products ordered by 3 pm ship same day! ● Same-day quotes from your dedicated Sales Rep!
& *Registration will take 1 day or less
PEAK TRADING CORPA direct importer and domestic wholesale distributor1 Tomsons Road #100, Saugerties, NY 12477
800.952.7325/845.338.1325 F: 845.338.1372 E: cs@peaktrading.comwww.peaktrading.com
1997 CELEBRATING 20 YEARS 2017
Peak Trading Corp 1 Tomsons Rd, #100Saugerties, NY 12477
Recommended