AIRCRAFT CABLE • WIRE ROPE •RIGGING … cable • wire rope •rigging hardware chain •lifting slings •tie-downs

AIRCRAFT CABLE • WIRE ROPE •RIGGING HARDWARE

CHAIN •LIFTING SLINGS •TIE-DOWNS

Peak Trading Corporation does not make any warranties of merchantability or fitness for any particular purpose or any other warranty, express or implied. Unless specifically stated, products are of commercial quality and standards. Buyer must determine suitability for the products particular use or purpose and will assume any and all risk and liability what-soever resulting from the use of all products, whether used singly or in combination with other products or components. If requested and/or applicable, manufacturer’s material certifications may be provided with no representations made as to their accuracy.

ORDERING INFORMATIONOrdering hours are 8:00 AM to 5:00 PM, EST, Monday through Friday. If faxing an order, please include a daytime phone number.

PRICING We will do our best to maintain current prices. However, due to fluctuating prices of raw materials, pricing is subject to change without notice.

CREDIT CARDSWe accept the following major credit cards: VISA, MasterCard, Discover and American Express.

INVOICE TERMSBilling terms are net 30 days from the date of invoice for approved credit accounts. The minimum invoice amount is $50.00.

SALES TAX New York State sales tax is required on all orders picked up or delivered in New York unless your New York State tax exemption certificate is on file with our office. All other applicable taxes are the purchaser’s responsibility.

RETURNED CHECKSA $20.00 fee will be charged for any check returned to Peak Trading.

FREIGHT CHARGESAll materials are sold F.O.B. Shipping Point. Freight prepaid on orders over 1,000 lbs. Peak Trading reserves the right to ship by the carrier of its choice. Any damage in transit or loss of freight is the responsibility of the carrier. Claims should be made directly to the freight carrier.

TERMS & CONDITIONS LATE CHARGESA finance charge of 1.5% per month will be added to all past due accounts. Accounts with a past due balance are ineligible for additional shipments until the outstanding balance and finance charges are paid in full.

NOTICE OF DEFECT OR DAMAGEBuyer is responsible to inspect all products upon receipt of order. Claims for damages, shortages or defects must be made within 30 days of original receipt of goods. All claims not made, in writing to Peak Trading Corporation within 30 days of original receipt of goods shall be deemed waived.

Peak Trading Corporation will not pay any claim for labor, delays, or damage by reason of their use. No products shall be returned without prior consent and Return Authorization Number (RA Number).

To request a Return Authorization Number by phone, please call 800.952.7325 or 845.338.1325 between 8:30 am – 5:00 pm EST. To contact us by email, be sure to include your order number, account number, and the item number(s) for the item(s) you want to return.

RETURNED MERCHANDISEOur goal is 100% customer satisfaction. If merchandise needs to be returned, it must have an RGA number. Merchan-dise cannot be returned without prior approval from Peak Trading. Requests for returns must be made within 30 days of original receipt of goods. All returns must be in salable condition. If the merchandise is being returned as a result of customer error, we will charge a 15% restocking fee plus any outbound and inbound freight charges. Custom assemblies and custom lengths of cable, wire rope, and chain are not returnable.

2 Phone: 800.952.7325 Fax: 845.338.1372Products and pricing are subject to availability, and may change without notice.

Table of Contents

Aircraft CableAircraft Cable-Galvanized �� 3Aircraft Cable-Galvanized Vinyl Coated �� 3Aircraft Cable-SS �� 4

BlocksSnatch Blocks �� 30Wire Rope Blocks (Small)�� 28Wood Shell Blocks �� 31

ChainG100 Lifting Chain �� 19G30 Proof Coil Chain �� 19G30 Proof Coil Chain SS �� 19G70 Transport Chain YC �� 19Jack Chain, Single-Double �� 19Loop Chain, Single-Double �� 19

Lifting SlingsChain Slings �� 16Roundslings �� 17Synthetic Web Slings �� 17Wear Pads �� 18Wire Rope Bridles �� 15Wire Rope Slings �� 14

Rigging HardwareBeam Clamps �� 31Clevis Grab Hooks �� 23Clevis Slip Hooks �� 24Cold Shuts �� 25Connecting Links �� 25Eye Hoist Hooks �� 23Eye Bolts �� 27Eye Nuts �� 25Fist Grips �� 10Forged Links �� 24Hammerlocks �� 25Lag Eye Screws �� 28Lap Links �� 25Quick Links �� 25Quick Links - SS �� 26S Hooks �� 26Shackles �� 22Spring Hooks �� 25Swage Fittings �� 11Swage Stops �� 12Swivels �� 29Thimbles �� 12Turnbuckles �� 20Wire Rope Clips �� 10

Rope3-Strand Rope �� 36

StrandStrand - Galvanized �� 5

Tie Down EquipmentBinder Chains �� 35Load Binders �� 35Ratchet Straps �� 35

Tools-Cutting & SwagingBolt-Chain Cutters �� 34Swaging Tools �� 32Wire Rope Cutters �� 34

Wire RopeWire Rope-Bright General Purpose �� 5Wire Rope-Galvanized General Purpose �� 7Wire Rope-Stainless Steel �� 9

Our MissionWe at Peak Trading Corporation are 100% committed to exceeding your expectations in pricing, service and satisfaction. Understanding our customers’ needs and responding to them promptly are the cornerstone of our company philosophy. You will always be greeted by our friendly and knowledgeable staff who will help in any way they can. We carry a substantial amount of stock for immediate shipment. If you don’t see what you are looking for in this catalog, please ask and we will be happy to fulfill your request. Our commitment to you is sincere. Our purpose is to create opportunity, enrichment and extraordinary achievement for everyone we touch.

VISIT OUR WEBSITE...www.peaktrading.comTo find our complete line of

PRODUCTS

Free Shipping on Orders Over 1,000 lbs* Some restrictions apply to overweight items.

3

Aircraft Cable-Galvanized

7x7 Galvanized Aircraft Cable�•��Made�in�accordance�with�Federal�Specification�

RR-W-410G• Available in a variety of put-ups

Item ID Size MBS (lbs) Available Put Ups

106-GAC7/062-XXXX 1/16” 480 250’, 500’, 1000’, 5000’

106-GAC7/093-XXXX 3/32” 920 250’, 500’, 1000’, 5000’

106-GAC7/125-XXXX 1/8” 1700 250’, 500’, 1000’, 5000’

106-GAC7/156-XXXX 5/32” 2600 250’, 500’, 1000’, 5000’

106-GAC7/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’

106-GAC7/250-XXXX 1/4” 6100 250’, 500’, 1000’, 5000’

7x7 Galvanized Aircraft Cable Korean�•��Made�in�accordance�with�Federal�Specification�



106K-GAC7/062-XXXX 1/16” 1700 250’, 500’, 1000’, 5000’

106K-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’

106K-GAC7/125-XXXX 1/8” 480 250’, 500’, 1000’, 5000’

106K-GAC7/156-XXXX 5/32” 2600 250’, 500’, 1000’, 5000’

106K-GAC7/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’

106K-GAC7/250-XXXX 1/4” 6100 250’, 500’, 1000’, 5000’




106-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’

106-GAC9/125-XXXX 1/8” 2000 250’, 500’, 1000’, 5000’

106-GAC9/156-XXXX 5/32” 2800 250’, 500’, 1000’, 5000’

106-GAC9/187-XXXX 3/16” 4200 250’, 500’, 1000’, 5000’

106-GAC9/218-XXXX 7/32” 5600 250’, 500’, 1000’, 5000’

106-GAC9/250-XXXX 1/4” 7000 250’, 500’, 1000’, 5000’

106-GAC9/312-XXXX 5/16” 9800 250’, 500’, 1000’, 5000’

106-GAC9/375-XXXX 3/8” 14,400 250’, 500’, 1000’, 5000’




106K-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’

106K-GAC9/125-XXXX 1/8” 2000 250’, 500’, 1000’, 5000’

106K-GAC9/156-XXXX 5/32” 2800 250’, 500’, 1000’, 5000’

106K-GAC9/187-XXXX 3/16” 4200 250’, 500’, 1000’, 5000’

106K-GAC9/218-XXXX 7/32” 5600 250’, 500’, 1000’, 5000’

106K-GAC9/250-XXXX 1/4” 7000 250’, 500’, 1000’, 5000’

106K-GAC9/312-XXXX 5/16” 9800 250’, 500’, 1000’, 5000’

106K-GAC9/375-XXXX 3/8” 14,400 250’, 500’, 1000’, 5000’

7x7 Vinyl Coated Galvanized Aircraft Cable Clear�•��Made�in�accordance�with�Federal�Specification�



107-VGAC7047/062-XXXX 3/64-1/16 270 250’, 500’, 1000’, 5000’

107-VGAC7062/093-XXXX 1/16-3/32” 480 250’, 500’, 1000’, 5000’

107-VGAC7062/125-XXXX 1/16-1/8” 480 250’, 500’, 1000’, 5000’

107-VGAC7093/125-XXXX 3/32-1/8” 920 250’, 500’, 1000’, 5000’

107-VGAC7093/187-XXXX 3/32-3/16” 920 250’, 500’, 1000’, 5000’

107-VGAC7125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’

7x7 Vinyl Coated Galvanized Aircraft Cable Black�•��Made�in�accordance�with�Federal�Specification�



107-VGAC7B062/093-XXXX 1/16-3/32” 480 250’, 500’, 1000’, 5000’

107-VGAC7B062/125-XXXX 1/16-1/8” 480 250’, 500’, 1000’, 5000’

107-VGAC7B093/125-XXXX 3/32-1/8” 920 250’, 500’, 1000’, 5000’

107-VGAC7B093/187-XXXX 3/32-3/16” 920 250’, 500’, 1000’, 5000’

107-VGAC7B125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’


Aircraft Cable

7x19 Vinyl Coated Galvanized Aircraft Cable Clear • Made in accordance with E3:H15h Federal Specification�RR-W-410G

• Available in a variety of put-ups


107-VGAC9125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’

107-VGAC9187/250-XXXX 3/16-1/4” 3700 250’, 500’, 1000’, 5000’

107-VGAC9250/312-XXXX 1/4-5/16” 6400 250’, 500’, 1000’, 5000’

107-VGAC9312/375-XXXX 5/16-3/8” 5400 250’, 500’, 1000’, 5000’

107-VGAC9375/437-XXXX 3/8-7/16” 14,400 250’, 500’, 1000’, 5000’

7x19 Vinyl Coated Galvanized Aircraft Cable Black�•��Made�in�accordance�with�Federal�Specification�



107-VGAC9B125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’

107-VGAC9B187/250-XXXX 3/16-1/4” 3700 250’, 500’, 1000’, 5000’

107-VGAC9B250/312-XXXX 1/4-5/16” 6400 250’, 500’, 1000’, 5000’

107-VGAC9B312/375-XXXX 5/16-3/8” 5400 250’, 500’, 1000’, 5000’

107-VGAC9B375/437-XXXX 3/8-7/16” 14,400 250’, 500’, 1000’, 5000’

7x7 Stainless Steel Aircraft Cable T304�•��Made�in�accordance�with�Federal�Specification�



109-SSAC7/304/062-XXXX 1/16” 480 250’, 500’, 1000’, 5000’

109-SSAC7/304/093-XXXX 3/32” 920 250’, 500’, 1000’, 5000’

109-SSAC7/304/125-XXXX 1/8” 1700 250’, 500’, 1000’, 5000’

109-SSAC7/304/156-XXXX 5/32” 2400 250’, 500’, 1000’, 5000’

109-SSAC7/304/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’




109-SSAC9/304/125-XXXX 1/8” 1760 250’, 500’, 1000’, 5000’

109-SSAC9/304/156-XXXX 5/32” 2400 250’, 500’, 1000’, 5000’

109-SSAC9/304/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’

109-SSAC9/304/218-XXXX 7/32” 5000 250’, 500’, 1000’, 5000’

109-SSAC9/304/250-XXXX 1/4” 6400 250’, 500’, 1000’, 5000’

109-SSAC9/304/312-XXXX 5/16” 9000 250’, 500’, 1000’, 5000’

109-SSAC9/304/375-XXXX 3/8” 12,000 250’, 500’, 1000’, 5000’




109-SSAC7/316/062-XXXX 1/16” 360 250’, 500’, 1000’, 5000’

109-SSAC7/316/093-XXXX 3/32” 700 250’, 500’, 1000’, 5000’

109-SSAC7/316/125-XXXX 1/8” 1360 250’, 500’, 1000’, 5000’




109-SSAC9/316/125-XXXX 1/8” 1300 250’, 500’, 1000’, 5000’

109-SSAC9/316/187-XXXX 3/16” 2900 250’, 500’, 1000’, 5000’

109-SSAC9/316/250-XXXX 1/4” 4900 250’, 500’, 1000’, 5000’

109-SSAC9/316/312-XXXX 5/16” 7600 250’, 500’, 1000’, 5000’

109-SSAC9/316/375-XXXX 3/8” 11,000 250’, 500’, 1000’, 5000’


5

Strand / Wire Rope

1x7 Common Strand • Our 1x7 Common Grade Galvanized Strand (Guy

Strand) is very pliable and great for splicing. This common strand is used for many of the same applications as our Extra High Strength Galvanized Strand, but it is easily manipulated by hand. When bending, common grade strand will�stay�bent.�Galvanized�finish�provides�strength and corrosion protection over time. We stock 1x7 common strand in 1/8, 3/16, 1/4, 5/16 and 3/8 inch diameters. Sold in custom lengths and coil form. Meets ASTM A-475-03 Class�A�specification.


112-GSTR7/125-XXXX 1/8” 540 250’, 500’

112-GSTR7/187-XXXX 3/16” 1150 250’, 500’

112-GSTR7/250-XXXX 1/4” 1900 250’, 500’

112-GSTR7/312-XXXX 5/16” 3200 250’, 500’

112-GSTR7/375-XXXX 3/8” 4250 250’, 500’

1x7 EHS Strand • Our 1x7 Extra High Strength (EHS) Galvanized

Strand (Guy Strand) is commonly used by arborists and linemen for bracing and tensioning applications because it has excellent tensile strength�and�very�little�stretch.�Galvanized�finish�provides strength and corrosion protection over time. For use with Tree Grips or Cable Clips or other Guy Grip Products. Cannot be spliced. Sold in custom lengths and coil form. Meets ASTM A-475-03�Class�A�specification.


112-GSTR7EHS187-XXXX 3/16” 3990 250’, 500’

112-GSTR7EHS250-XXXX 1/4” 6650 250’, 500’

112-GSTR7EHS312-XXXX 5/16” 11,200 250’, 500’

112-GSTR7EHS375-XXXX 3/8” 15,400 250’, 500’

6x25 Fiber Core Bright Wire Rope• Made in accordance with Federal Specification�RR-W-410D

• It is available in Improved Plow Steel and Extra Improved Plow Steel

Item ID Size MBS (tons) Put Up (ft)

140-F19IPS0250-0000 1/4” 2.74 Per ft

140-F25IPS0312-0000 5/16” 4.26 Per ft

140-F25IPS0375-0000 3/8” 6.1 Per ft

140-F25IPS0437-0000 7/16” 8.3 Per ft

140-F25IPS0500-0000 1/2” 10.7 Per ft

140-F25IPS0562-0000 9/16” 13.5 Per ft

140-F19IPS0625-0000 5/8” 16.7 Per ft

140-F25XIP0750-0000 3/4” 23.8 Per ft

140-F25XIP0875-0000 7/8” 32.2 Per ft

6x25 IWRC Bright Wire Rope• Made in accordance with Federal Specification�RR-W-410G

• Available in Improved Plow Steel and Extra Improved Plow Steel


140-S19XIP0250-0000 1/4” 3.4 Per ft

140-S25XIP0312-0000 5/16” 5.27 Per ft

140-S25XIP0375-0000 3/8” 7.55 Per ft

140-S25XIP0437-0000 7/16” 10.2 Per ft

140-S25XIP0500-0000 1/2” 13.3 Per ft

140-S25XIP0562-0000 9/16” 16.8 Per ft

140-S25XIP0625-0000 5/8” 20.6 Per ft

140-S25XIP0750-0000 3/4” 29.4 Per ft

140-S25XIP0875-0000 7/8” 39.8 Per ft

6x25 Fiber Core Bright Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G



140K-F25XIP0250-0000 1/4” 2.74 Per ft

140K-F25XIP0312-0000 5/16” 4.26 Per ft

140K-F25XIP0375-0000 3/8” 6.1 Per ft

140K-F25XIP0437-0000 7/16” 8.27 Per ft

140K-F25XIP0500-0000 1/2” 10.7 Per ft

140K-F25XIP0562-0000 9/16” 13.5 Per ft

140K-F25XIP0625-0000 5/8” 16.7 Per ft

140K-F25XIP0750-0000 3/4” 32.2 Per ft

140K-F25XIP0875-0000 7/8” 32.2 Per ft

We Make Custom Assemblies!Wire Rope Winchlines / Slings / Assemblies

Aircraft Cable Winchlines / Slings / Assemblies Synthetic Rope Winchlines / Slings / Assemblies

Chain Slings / Assemblies


Wire Rope-Bright General Purpose

6x25 IWRC Bright Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G

• Extra Improved plow steel


140K-S25XIP0250-0000 1/4” 3.4 Per ft

140K-S25XIP0312-0000 5/16” 5.27 Per ft

140K-S25XIP0375-0000 3/8” 7.55 Per ft

140K-S25XIP0437-0000 7/16” 7.55 Per ft

140K-S25XIP0500-0000 1/2” 13.3 Per ft

140K-S25XIP0562-0000 9/16” 16.8 Per ft

140K-S25XIP0625-0000 5/8” 20.6 Per ft

140K-S25XIP0750-0000 3/4” 29.4 Per ft

140K-S25XIP0875-0000 7/8” 32.2 Per ft

140K-S25XIP1000-0000 1” 51.7 Per ft

140K-S25XIP1125-0000 1-1/8” 65 Per ft

140K-S25XIP1250-0000 1-1/4” 79 Per ft

140K-S25XIP1375-0000 1-3/8” 96 Per ft

140K-S25XIP1500-0000 1-1/2” 114 Per ft

6x37 Fiber Core Bright Wire Rope• Made in accordance with Federal Specification�RR-W-410G



140-F37IPS0250-0000 1/4” 2.74 Per ft

140-F37IPS0312-0000 5/16” 4.26 Per ft

140-F37IPS0375-0000 3/8” 6.1 Per ft

140-F37IPS0437-0000 7/16” 8.27 Per ft

140-F37IPS0500-0000 1/2” 10.7 Per ft

140-F37IPS0562-0000 9/16” 13.5 Per ft

140-F37IPS0625-0000 5/8” 16.7 Per ft

140-F37IPS0750-0000 3/4” 23.8 Per ft

140-F37IPS0875-0000 7/8” 32.2 Per ft

6x37 Fiber Core Bright Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G



140K-F37XIP0250-0000 1/4” 2.74 Per ft

140K-F37XIP0312-0000 5/16” 4.26 Per ft

140K-F37XIP0375-0000 3/8” 6.1 Per ft

140K-F37XIP0437-0000 7/16” 8.27 Per ft

140K-F37XIP0500-0000 1/2” 10.7 Per ft

140K-F37XIP0562-0000 9/16” 13.5 Per ft

140K-F37XIP0625-0000 5/8” 20.9 Per ft

140K-F37XIP0750-0000 3/4” 29.4 Per ft

140K-F37XIP0875-0000 7/8” 29.8 Per ft

6x37 IWRC Bright Wire Rope• Made in accordance with Federal Specification�RR-W-410G



140-S37XIP0250-0000 1/4” 3.4 Per ft

140-S37XIP0312-0000 5/16” 5.27 Per ft

140-S37XIP0375-0000 3/8” 7.55 Per ft

140-S37XIP0437-0000 7/16” 10.2 Per ft

140-S37XIP0500-0000 1/2” 13.3 Per ft

140-S37XIP0562-0000 9/16” 16.8 Per ft

140-S37XIP0625-0000 5/8” 20.9 Per ft

140-S37XIP0750-0000 3/4” 29.4 Per ft

140-S37XIP0875-0000 7/8” 29.8 Per ft


7

Wire Rope

6x37 IWRC Bright Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G



140K-S37XIP0250-0000 1/4” 3.4 Per ft

140K-S37XIP0312-0000 5/16” 5.27 Per ft

140K-S37XIP0375-0000 3/8” 7.55 Per ft

140K-S37XIP0437-0000 7/16” 10.2 Per ft

140K-S37XIP0500-0000 1/2” 13.3 Per ft

140K-S37XIP0562-0000 9/16” 16.8 Per ft

140K-S37XIP0625-0000 5/8” 20.6 Per ft

140K-S37XIP0750-0000 3/4” 29 Per ft

140K-S37XIP0875-0000 7/8” 39.8 Per ft

140K-S37XIP1000-0000 1” 51.7 Per ft

140K-S37XIP1125-0000 1-1/8” 65 Per ft

140K-S37XIP1250-0000 1-1/4” 79.9 Per ft

140K-S37XIP1375-0000 1-3/8” 96 Per ft

140K-S37XIP1500-0000 1-1/2” 114 Per ft

140K-S37XIP1625-0000 1-5/8” 132 Per ft

140K-S37XIP1750-0000 1-3/4” 153 Per ft

140K-S37XIP2000-0000 2” 198 Per ft

6x25 Fiber Core Galv Wire Rope• Made in accordance with Federal Specification�RR-W-410G



141-F19IPS0375-0000 3/8” 5.49 Per ft

141-F19IPS0437-0000 7/16” 7.4 Per ft

141-F19IPS0500-0000 1/2” 9.63 Per ft

141-F19IPS0562-0000 9/16” 12 Per ft

141-F19IPS0625-0000 5/8” 15 Per ft

141-F19IPS0750-0000 3/4” 21.4 Per ft

141-F19IPS0875-0000 7/8” 29 Per ft

6x25 Fiber Core Galv Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G



141K-F25XIP0375-0000 3/8” 6.8 Per ft

141K-F25XIP0437-0000 7/16” 9.2 Per ft

141K-F25XIP0500-0000 1/2” 12 Per ft

141K-F25XIP0625-0000 5/8” 18.5 Per ft

141K-F25XIP0562-0000 9/16” 15 Per ft

141K-F25XIP0750-0000 3/4” 26.5 Per ft

141K-F25XIP0875-0000 7/8” 35.8 Per ft

141K-F25XIP1000-0000 1” 46.5 Per ft

141K-F25XIP1125-0000 1-1/8” 58.5 Per ft

141K-F25XIP1250-0000 1-1/4” 71.9 Per ft

141K-F25XIP1375-0000 1-3/8” 102 Per ft

141K-F25XIP1500-0000 1-1/2” 118.8 Per ft

6x25 IWRC Galv Wire Rope• Made in accordance with Federal Specification�RR-W-410G

• Extra Improved Plow Steel


141-S25XIP0375-0000 3/8” 6.8 Per ft

141-S25XIP0437-0000 7/16” 9.2 Per ft

141-S25XIP0500-0000 1/2” 12 Per ft

141-S25XIP0562-0000 9/16” 15.1 Per ft

141-S25XIP0625-0000 5/8” 18.5 Per ft

141-S25XIP0750-0000 3/4” 26.5 Per ft

141-S25XIP0875-0000 7/8” 35.8 Per ft


Wire Rope-Galvanized General Purpose

6x25 IWRC Galv Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G

• Extra Improved Plow Steel


141K-S25XIP0375-0000 3/8” 6.8 Per ft

141K-S25XIP0437-0000 7/16” 9.2 Per ft

141K-S25XIP0500-0000 1/2” 12 Per ft

141K-S25XIP0562-0000 9/16” 15.1 Per ft

141K-S25XIP0625-0000 5/8” 18.5 Per ft

141K-S25XIP0750-0000 3/4” 26.5 Per ft

141K-S25XIP0875-0000 7/8” 35.8 Per ft

141K-S25XIP1000-0000 1” 46.8 Per ft

141K-S25XIP1125-0000 1-1/8” 58.5 Per ft

141K-S25XIP1250-0000 1-1/4” 71.9 Per ft

141K-S25XIP1375-0000 1-3/8” 86.4 Per ft

141K-S25XIP1500-0000 1-1/2” 102.6 Per ft

6x37 Fiber Core Galv Wire Rope• Made in accordance with Federal Specification�RR-W-410G



141-F37XIP0250-0000 1/4” 2.47 Per ft

141-F37XIP0312-0000 5/16” 3.83 Per ft

141-F37XIP0375-0000 3/8” 5.49 Per ft

141-F37XIP0437-0000 7/16” 7.4 Per ft

141-F37XIP0500-0000 1/2” 9.6 Per ft

141-F37XIP0562-0000 9/16” 12.2 Per ft

141-F37XIP0625-0000 5/8” 15 Per ft

141-F37XIP0750-0000 3/4” 21.4 Per ft

141-F37XIP0875-0000 7/8” 29 Per ft

6x37 Fiber Core Galv Wire Rope Korean• Our Wire Rope is made in accordance with�Federal�Specification�RR-W-410G



141K-F37XIP0250-0000 1/4” 2.47 Per ft

141K-F37XIP0312-0000 5/16” 3.83 Per ft

141K-F37XIP0375-0000 3/8” 5.5 Per ft

141K-F37XIP0437-0000 7/16” 7.4 Per ft

141K-F37XIP0500-0000 1/2” 9.63 Per ft

141K-F37XIP0562-0000 9/16” 12.2 Per ft

141K-F37XIP0625-0000 5/8” 15 Per ft

141K-F37XIP0750-0000 3/4” 21.4 Per ft

141K-F37XIP0875-0000 7/8” 29 Per ft

6x37 IWRC Galv Wire Rope• Made in accordance with Federal Specification�RR-W-410G



141-S37XIP0250-0000 1/4” 3.1 Per ft

141-S37XIP0312-0000 5/16” 4.7 Per ft

141-S37XIP0375-0000 3/8” 6.8 Per ft

141-S37XIP0437-0000 7/16” 9.2 Per ft

141-S37XIP0500-0000 1/2” 12 Per ft

141-S37XIP0562-0000 9/16” 15 Per ft

141-S37XIP0625-0000 5/8” 18.5 Per ft

141-S37XIP0750-0000 3/4” 26.5 Per ft

141-S37XIP0875-0000 7/8” 35.8 Per ft


9

Wire Rope

6x37 IWRC Galvanized Wire Rope Korean• Made in accordance with Federal Specification�RR-W-410G



141K-S36XIP0250-0000 1/4” 3.1 Per ft

141K-S37XIP0312-0000 5/16” 4.7 Per ft

141K-S37XIP0375-0000 3/8” 6.8 Per ft

141K-S37XIP0437-0000 7/16” 9.2 Per ft

141K-S37XIP0500-0000 1/2” 12 Per ft

141K-S37XIP0562-0000 9/16” 12 Per ft

141K-S37XIP0625-0000 5/8” 15.1 Per ft

141K-S37XIP0750-0000 3/4” 18.5 Per ft

141K-S37XIP0875-0000 7/8” 26.5 Per ft

141K-S37XIP1000-0000 1” 46.5 Per ft

141K-S37XIP1125-0000 1-1/8” 58.5 Per ft

141K-S37XIP1250-0000 1-1/4” 71.9 Per ft

141K-S37XIP1375-0000 1-3/8” 86.4 Per ft

141K-S37XIP1500-0000 1-1/2” 102.6 Per ft

6x25 IWRC SS T304 Wire Rope• Our Wire Rope is made in accordance with�Federal�Specification�RR-W-410G


Item ID Size MBS (lbs) Put Up (ft)

142-S25/304/0437-0000 7/16” 16,300 Per ft

142-S25/304/0500-0000 1/2” 22,800 Per ft

142-S25/304/0562-0000 9/16” 28,500 Per ft

142-S25/304/0625-0000 5/8” 35,000 Per ft

142-S25/304/0750-0000 3/4” 49,600 Per ft

142-S25/304/0875-0000 7/8” 66,500 Per ft

142-S25/304/1000-0000 1” 85,400 Per ft

6x37 IWRC SS T304 Wire Rope• Our Wire Rope is made in accordance with�Federal�Specification�RR-W-410G


Item ID Size MBS (lbs) Put Up (ft)

142-S37/304/0437-0000 7/16” 16,300 Per ft

142-S37/304/0500-0000 1/2” 22,800 Per ft

142-S37/304/0562-0000 9/16” 28,500 Per ft

142-S37/304/0625-0000 5/8” 35,000 Per ft

142-S37/304/0750-0000 3/4” 49,600 Per ft

142-S37/304/0875-0000 7/8” 58,000 Per ft

142-S37/304/1000-0000 1” 85,400 Per ft

INCORRECT CORRECT

To Properly measure wire rope, measure the greatest distance of the outer circle. It is very important to

measure wire rope correctly to an accurate rope size.

Measuring Wire Rope


Wire Rope Clips

Malleable Wire Rope Clips• High-Quality Electro-Galvanized Steel

Item ID Size Min Clips Weight

115-WRCM0062 1/16” 2 0.02 lbs

115-WRCM0125 1/8” 2 0.03 lbs

115-WRCM0187 3/16” 2 0.06 lbs

115-WRCM0250 1/4” 2 0.11 lbs

115-WRCM0312 5/16” 2 0.14 lbs

115-WRCM0375 3/8” 2 0.21 lbs

115-WRCM0500 1/2” 3 0.36 lbs

115-WRCM0437 7/16” 4 0.44 lbs

115-WRCM0562 9/16” 4 0.59 lbs

115-WRCM0625 5/8” 4 0.54 lbs

115-WRCM0750 3/4” 4 0.79 lbs

115-WRCM0875 7/8” 4 1.16 lbs

115-WRCM1000 1” 5 1.43 lbs

Drop Forged Wire Rope Clips•��Our�Drop�Forged�Wire�Rope�Clips�are�

constructed of high quality hot dip galvanized, drop forged steel

Item ID Size Min Clips Min Turn Back (in) Weight

115-WRCDF0125 1/8” 2 3.25” 0.06 lbs

115-WRCDF0187 3/16” 2 3.75” 0.10 lbs

115-WRCDF0250 1/4” 2 4.75” 0.20 lbs

115-WRCDF0312 5/16” 2 5.25” 0.31 lbs

115-WRCDF0375 3/8” 2 6.50” 0.47 lbs

115-WRCDF0437 7/16” 2 7” 0.76 lbs

115-WRCDF0500 1/2” 3 11.5” 0.80 lbs

115-WRCDF0562 9/16” 3 12” 1.02 lbs

115-WRCDF0625 5/8” 3 12” 1.04 lbs

115-WRCDF0750 3/4” 4 18” 1.50 lbs

115-WRCDF0875 7/8” 4 19” 2.40 lbs

115-WRCDF1000 1” 5 26” 2.60 lbs

115-WRCDF1125 1-1/8” 7 44” 4.00 lbs

115-WRCDF1250 1-1/4” 7 44” 4.44 lbs

115-WRCDF1375 1-3/8” 8 54” 4.63 lbs

115-WRCDF1500 1-1/2” 8 54” 5.90 lbs

115-WRCDF1750 1-3/4” 8 58” 9.34 lbs

115-WRCDF2000 2” 8 71” 13.00 lbs

Fist Grip Wire Rope Clips• Our Fist Grip Wire rope Clips are used in

combination with wire rope and a thimble to make a secure wire loop

• Clips are galvanized for corrosion resistance•��These�clips�meet�Federal�Specification�

FF-C-450 Type III, Class 1, except for those provisions required of the contractor


115-WRCFG0187/250 3/16-1/4” 2 4” 0.23 lbs

115-WRCFG0312 5/16” 2 5” 0.30 lbs

115-WRCFG0375 3/8” 2 5-1/4” 0.40 lbs

115-WRCFG0437/500 7/16-1/2” 3 11” 0.62 lbs

115-WRCFG0562/625 9/16-5/8” 3 13-1/2” 1.03 lbs

115-WRCFG0750 3/4” 3 16” 1.75 lbs

115-WRCFG0875 7/8” 4 26” 2.25 lbs

115-WRCFG1000 1” 5 37” 3.00 lbs

SS Malleable Wire Rope Clips• Our SS Malleable Wire Rope Clips are

constructed of high quality Type 304 stainless steel


116-304-WRCM0062 1/16” 2 0.03 lbs

116-304-WRCM0125 1/8” 2 0.04 lbs

116-304-WRCM0187 3/16” 2 0.07 lbs

116-304-WRCM0250 1/4” 2 0.19 lbs

116-304-WRCM0312 5/16” 2 0.19 lbs

116-304-WRCM0375 3/8” 3 0.22 lbs

116-304-WRCM0500 1/2” 3 0.39 lbs

SS Drop Forged Wire Rope Clips• Stainless Steel• Forged Type 304


116-304-WRCDF0062 1/16” 2 0.05 lbs

116-304-WRCDF0125 1/8” 2 0.05 lbs

116-304-WRCDF0187 3/16” 2 0.10 lbs

116-304-WRCDF0250 1/4” 2 0.18 lbs

116-304-WRCDF0312 5/16” 2 0.31 lbs

116-304-WRCDF0375 3/8” 3 0.47 lbs

116-304-WRCDF0500 1/2” 3 0.75 lbs

Also available in Type 316 stainless steel



11

Fist Grips / Swage Sleeves

SS Fist Grip Wire Rope Clips• Our Fist Grip Wire rope Clips are used in

combination with wire rope and a thimble to make a secure wire loop

• Clips are galvanized for corrosion resistance•��These�clips�meet�Federal�Specification�

FF-C-450 Type III, Class 1, except for those provisions required of the contractor


341-S0122-C007 1/4” 2 4” 0.23 lbs

341-S0122-C008 5/16” 2 5” 0.30 lbs

341-S0122-C010 3/8” 2 5-1/4” 0.40 lbs

341-S0122-C013 1/2” 3 11” 0.62 lbs

341-S0122-C016 5/8” 3 13-1/2” 1.03 lbs

341-S0122-C020 3/4” 3 16” 1.75 lbs

Aluminum Swage Sleeves• Capable of supporting 95% of the rated

breaking strength of the cable to which they are applied

Item ID Size Material Weight

115-ASL062 1/16” Aluminum 0.01 lbs








Copper Swage Sleeves• Capable of supporting the rated breaking

strength of the cable when properly applied


115-CSL062 1/16” Copper 0.01 lbs

115-CSL093 3/32” Copper 0.01 lbs

115-CSL125 1/8” Copper 0.02 lbs

115-CSL156 5/32” Copper 0.02 lbs

115-CSL187 3/16” Copper 0.05 lbs

115-CSL250 1/4” Copper 0.08 lbs

115-CSL312 5/16” Copper 0.12 lbs

115-CSL375 3/8” Copper 0.16 lbs

ZP Copper Swage Sleeves• Capable of supporting the rated breaking

strength of the cable when properly applied


115-CSL062ZP 1/16” Zinc Plated Copper 0.01 lbs










115-CSL500ZP 1/2” Zinc plated Copper 0.39 lbs

SS Swage Sleeves• Use SS Sleeves to lap and eye-splice

stainless steel cable and wire rope• Ideal for general outdoor, marine,

corrosive and other harsh environments

Item ID Size Weight

116-304-SL046 3/64” 0.01 lbs

116-304-SL062 1/16” 0.01 lbs

116-304-SL093 3/32” 0.01 lbs

116-304-SL125 1/8” 0.01 lbs

116-304-SL187 3/16” 0.02 lbs

116-304-SL218 7/32” 0.03 lbs

116-304-SL250 1/4” 0.04 lbs

116-304-SL312 5/16” 0.06 lbs

When properly applied, Aluminum Swage Sleeves are capable of supporting 95% of the rated breaking strength of the cable.

Copper Swage Sleeves are capable of holding the rated breaking strength of the

aircraft cable.


Swage Stops

Aluminum Swage Stops• Capable of holding only 1/3 to 1/2 of

the rated breaking strength of the cable to which they are attached

Item ID Size Weight

115-AST062 1/16” 0.01 lbs

115-AST093 3/32” 0.01 lbs

115-AST125 1/8” 0.01 lbs

115-AST156 5/32” 0.01 lbs

115-AST187 3/16” 0.01 lbs

115-AST250 1/4” 0.02 lbs

115-AST312 5/16” 0.02 lbs

115-AST375 3/8” 0.05 lbs

Copper Swage Stops• Capable of holding only 1/3 to 1/2 of

the rated breaking strength of the cable to which they are attached

Item ID Size Weight

115-CST062 1/16” 0.01 lbs

115-CST093 3/32” 0.01 lbs

115-CST125 1/8” 0.01 lbs

115-CST156 5/32” 0.01 lbs

115-CST187 3/16” 0.01 lbs

115-CST250 1/4” 0.06 lbs

115-CST312 5/16” 0.05 lbs

115-CST375 3/8” 0.04 lbs

AN Type Thimbles• Enhance the longevity of the cable by

protecting loop ends from wearing out and causing fraying

• Zinc Plated, Carbon Steel•��Meet�all�AN-100�Specifications

Item ID Size Weight

115-TAN062 1/16” 0.01 lbs

115-TAN093/125 3/32 & 1/8” 0.01 lbs

115-TAN187 3/16” 0.01 lbs

115-TAN250 1/4” 0.02 lbs

115-TAN312 5/16” 0.04 lbs

115-TAN375 3/8” 0.09 lbs

Standard Duty Thimbles• Meets the performance requirements of�Federal�Specification�FF-T-276b�Type�III, except for those provisions required of the contractor

•��Hot�Dip�Galvanized�Steel

Item ID Size Weight

115-TSD0125 1/8” 0.03 lbs

115-TSD0187 3/16” 0.03 lbs

115-TSD0250 1/4” 0.04 lbs

115-TSD0312 5/16” 0.04 lbs

115-TSD0375 3/8” 0.06 lbs

115-TSD0500 1/2” 0.13 lbs

115-TSD0625 5/8” 0.25 lbs

115-TSD0750 3/4” 0.50 lbs

115-TSD0875 7/8” 0.85 lbs

115-TSD1000 1” 1.04 lbs

Swage Stops are capable of holding 1/3 to 1/2 the rated breaking strength.


13

Thimbles

Heavy Duty Thimbles• Longer service life and greater

protection against wear and deformation of the wire rope eye

• Meets the performance requirements of�Federal�Specification�FF-T-276b�Type�III, except for those provisions required of the contractor

•��Hot�Dip�Galvanized�Steel

Item ID Size Weight

115-THD0250 1/4” 0.07 lbs

115-THD0312 5/16” 0.11 lbs

115-THD0375 3/8” 0.24 lbs

115-THD0500 1/2” 0.51 lbs

115-THD0625 5/8” 0.75 lbs

115-THD0750 3/4” 1.32 lbs

115-THD0875 7/8” 1.76 lbs

115-THD1000 1” 2.20 lbs

SS AN Type Thimble• Our Stainless Steel AN Type Thimbles

are designed to meet the most demanding marine, aircraft or industrial requirements

Item ID Size Weight

116-304-TAN062 1/16” 0.01 lbs

116-304-TAN093 3/32” 0.01 lbs

116-304-TAN125 1/8” 0.01 lbs

116-304-TAN187 3/16” 0.01 lbs

116-304-TAN250 1/4” 0.02 lbs

116-304-TAN312 5/16” 0.04 lbs

116-304-TAN375 3/8” 0.07 lbs

SS Standard Duty Thimbles• Made from Type 304 Stainless Steel.

Item ID Size Weight

116-304-TSD0250 1/4” 0.03 lbs

116-304-TSD0312 5/16” 0.05 lbs

116-304-TSD0375 3/8” 0.06 lbs

116-304-TSD0500 1/2” 0.11 lbs

116-304-TSD0625 5/8” 0.25 lbs

116-304-TSD0750 3/4” 0.28 lbs

116-304-TSD1000 1” 0.46 lbs

116-304-TSD0062 1/16” 0.03 lbs

SS Heavy Duty Thimbles• Type 304 Stainless Steel• Our Stainless Steel AN Type Thimbles are

designed to meet the most demanding marine, aircraft or industrial requirements

Item ID Size Weight

116-304-THD0250 1/4” 0.07 lbs

116-304-THD0312 5/16” 0.11 lbs

116-304-THD0375 3/8” 0.25 lbs

116-304-THD0500 1/2” 0.51 lbs

116-304-THD0625 5/8” 0.75 lbs

116-304-THD0750 3/4” 1.20 lbs

116-304-THD1000 1” 2.20 lbs




For Pricing: Contact your Sales Rep or email us at [email protected]


Wire Rope Slings

Eye & Eye Wire Rope Slings Import• Premium wire rope slings made to�exacting�specifications�by�our�fabrication team

• High quality Korean wire rope with flemish�eye�splices�and�mechanically�swaged steel sleeves

• Individually tagged with rated capacities�per�OSHA�specifications

Item ID Wire Size

Vertical WLL (tons)

Choker WLL (tons)

Base Length (ft)

050K-S25/0250X002 1/4” 0.65” 0.48 2’

050K-S25/0312X002 5/16” 1 0.74 2’

050K-S25/0375X002 3/8” 1.4 1.1 2’

050K-S25/0437X002 7/16” 1.9 1.4 2’

050K-S25/0500X002 1/2” 2.5 1.9 2’

050K-S25/0625X003 5/8” 3.9 2.9 3’

050K-S25/0875X004 7/8” 7.6 5.6 4’

050K-S25/1000X005 1” 9.8 7.2 5’

050K-S25/0750X004 3/4” 5.6 4.1 4’

050K-S37/1125X005 1-1/8” 12 9.1 5’

050K-S37/1250X006 1-1/4” 15 11 6’

Eye & Eye Wire Rope Slings Domestic• Premium wire rope slings made to�exacting�specifications�by�our�fabrication team

•��High�quality�Domestic�wire�rope�with�flemish�eye�splices�and�mechanically�swaged steel sleeves


Item ID Wire Size Vertical WLL (tons)

Choker WLL (tons)

Base Length (ft)

050D-S25/0250X002 1/4” 0.65” 0.48 2’

050D-S25/0312X002 5/16” 1 0.74 2’

050D-S25/0375X002 3/8” 1.4 1.1 2’

050D-S25/0437X002 7/16” 1.9 1.4 2’

050D-S25/0500X002 1/2” 2.5 1.9 2’

050D-S25/0625X003 5/8” 3.9 2.9 3’

050D-S25/0750X004 3/4” 5.6 4.1 4’

050D-S25/0875X004 7/8” 7.6 5.6 4’

050D-S25/1000X005 1” 9.8 7.2 5’

050D-S36/1125X005 1-1/8” 12 9.1 5’

050D-S36/1250X006 1-1/4” 15 11 6’

Thimble & Thimble Wire Rope Slings Import• Premium wire rope slings made to�exacting�specifications�by�our�fabrication teamHigh quality American wire�rope�with�flemish�eye�splices�and�mechanically swaged steel sleeves


Item ID Wire Size

Vertical WLL (tons)

Choker WLL (tons)

Base Length (ft)

050K-S25T/0250X002 1/4” 0.65” 0.48 2’

050K-S25T/0312X002 5/16” 1 0.74 2’

050K-S25T/0375X002 3/8” 1.4 1.1 2’

050K-S25T/0437X002 7/16” 1.9 1.4 2’

050K-S25T/0500X002 1/2” 2.5 1.9 2’

050K-S25T/0625X004 5/8” 3.9 2.9 3’

050K-S25T/0750X003 3/4” 5.6 4.1 4’

050K-S25T/0875X004 7/8” 7.6 5.6 4’

050K-S25T/1000X004 1” 9.8 7.2 5’

Thimble & Thimble Wire Rope Slings Domestic • Premium wire rope slings made to�exacting�specifications�by�our�fabrication teamHigh quality American wire�rope�with�flemish�eye�splices�and�mechanically swaged steel sleeves


Item ID Wire Size

Vertical WLL (tons)

Choker WLL (tons)

Base Length (ft)

050D-S25T/0250X002 1/4” 0.65 0.48 2’

050D-S25T/0312X002 5/16” 1 0.74 2’

050D-S25T/0375X002 3/8” 1.4 1.1 2’

050D-S25T/0437X002 7/16” 1.9 1.4 2’

050D-S25T/0500X002 1/2” 2.5 1.9 2’

050D-S25T/0625X003 5/8” 3.9 2.9 3’

050D-S25T/0750X004 3/4” 5.6 4.1 4’

050D-S25T/0875X004 7/8” 7.6 5.6 4’

050D-S25T/1000X005 1” 9.8 7.2 5’


15

Wire Rope Slings

Grade 100 Alloy Chain Sling Working Load Limits (lbs)

Size Single Leg Double Leg / Single Basket Triple and Quad Leg / Double Basket

1/4” 4,300 7,400 6,100 4,300 11,200 9,100 6,4005/16” 5,700 9,900 8,100 5,700 14,800 12,100 8,5003/8” 8,800 15,200 12,400 8,800 22,900 18,700 13,2001/2” 15,000 26,000 21,200 15,000 39,000 31,800 22,5005/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,9003/4” 35,300 61,100 49,900 35,300 91,700 74,900 53,000

6090 60 60

30 30 3045 45 45

Wire Rope Bridle Slings

Bridle Slingswith

Single Part Body

2- Leg Bridle 3- Leg Bridle 4- Leg Bridle

RopeDia.(in)

Min Sling

Length

Eye Hook Cap.

OblongLinkDia.

OblongLinkDia.

OblongLinkDia.

1/4” 1’ 3” 1 1.1 .91 .65 1/2 1.7 1.4 .97 1/2 2.2 1.8 1.3 1/25/16” 1’ 6” 1 1.7 1.4 1.0 1/2 2.6 2.1 1.5 1/2 3.5 2.8 2.0 3/4

3/8” 1’ 8” 11/2 2.5 2.0 1.4 1/2 3.7 3.0 2.2 3/4 5.0 4.1 2.9 3/47/16” 1’ 10” 2 3.4 2.7 1.9 3/4 5.0 4.1 2.9 3/4 6.7 5.5 3.9 1

1/2” 2’ 3 4.4 3.6 2.5 3/4 6.6 5.4 3.8 1 8.8 7.1 5.1 19/16” 2’ 2” 41/2 5.5 4.5 3.2 3/4 8.3 6.8 4.8 1 11 9.0 6.4 11/4

5/8” 2’ 4” 41/2 6.8 5.5 3.9 1 10 8.3 5.9 11/4 14 11 7.8 11/2

3/4” 2’ 9” 7 9.7 709 5.6 11/4 15 12 8.4 11/2 19 16 11 13/4

7/8” 3’ 3” 11 13 11 7.6 11/4 20 16 11 11/2 26 21 15 21 ” 3’ 6” 11 17 14 9.8 11/2 26 21 15 13/4 34 28 20 21/4

11/8” 4’ 15 21 17 12 11/2 31 26 18 13/4 42 34 24 23/4

11/4” 4’ 6” 15 26 21 15 13/4 38 31 22 2 51 42 30 23/4

13/8” 5’ 22 31 25 18 13/4 46 38 27 21/4 - - - -11/2” 5’ 6” 22 37 30 21 2 55 45 32 21/4 - - - -13/4” 6’ 6” 30 49 40 28 21/4 - - - - - - - -

2” 8’ 37 63 52 37 23/4 - - - - - - - -

304560

304560

304560

6 X 1

9 EI

P, IW

RC6X

37 EI

P, IW

RC

Wire Rope SlingsRope

Dia.(in) Vertical Choker Vertical Basket Min Sling Length Standard

Eye Size Thimbled Eye Size

1/4” .65 .48 1.3 1’6” 2 x 4 7/8 x 15/8

5/16” 1.0 .74 2.0 1’9” 21/2 x 5 11/16 x 11/8

3/8” 1.4 1.1 2.9 2’0” 3 x 6 11/8 x 21/8

7/16” 1.9 1.4 3.9 2’3” 31/2 x 7 11/4 x 21/4

1/2” 2.5 1.9 5.1 2’6” 4 x 8 11/2 x 23/4

9/16” 3.2 2.4 6.4 2’9” 41/2 x 9 11/2 x 23/4

5/8” 3.9 2.9 7.8 3’0” 5 x 10 13/4 x 31/4

3/4” 5.6 4.1 11 3’6” 6 x 12 2 x 33/4

7/8” 7.6 5.6 15 4’0” 7 x 14 21/2 x 41/4

1 ” 9.8 7.2 20 4’6” 8 x 16 21/2 x 41/2

11/8” 12 9.1 24 5’0” 9 x 18 27/8 x 51/8

11/4” 15 11 30 5’6” 10 x 20 31/2 x 61/2

13/8” 18 13 36 6’0” 11 x 22 31/2 x 61/4

11/2” 21 16 42 7’0” 12 x 24 31/2 x 61/4

13/4” 28 21 57 8’0” 14 x 28 41/2 x 92” 37 28 73 9’0” 16 x 32 6 x 12

21/4” 44 35 89 10’0” 18 x 36 7 x 1421/2” 54 42 109 11’0” 20 x 40 -

2-Leg Bridle 3-Leg Bridle 4-Leg Bridle

• Premium wire rope bridles made to exacting specifications�by�our�fabrication team

• High quality alloy hardware is attached to wire rope with�flemish�eye�splices�and�mechanically swaged steel sleeves

• Individually tagged with rated capacities per OSHA specifications

• Available in Import or Domestic

1/4” 1’3” 1 1.1 .91 0.65 1/2 1.7 1.4 .97 1/2 2.2 1.8 1.3 1/2

5/16” 1’6” 1 1.7 1.4 1 1/2 2.6 2.1 1.5 1/2 3.5 2.8 2 3/4

3/8” 1’8” 11/2 2.5 2.0 1.4 1/2 3.7 3.0 2.2 3/4 5 4.1 2.9 3/4

7/16” 1’10” 2 3.4 2.7 1.9 3/4 5 4.1 2.9 3/4 6.7 5.5 3.9 1

1/2” 2’ 3 4.4 3.6 2.5 3/4 6.6 5.4 3.8 1 8.8 7.1 5.1 1

9/16” 2’2” 41/2 5.5 4.5 3.2 3/4 8.3 6.8 4.8 1 11 9 6.4 11/4

5/8” 2’4” 41/2 6.8 5.5 3.9 1 10 8.3 5.9 11/4 14 11 7.8 11/2

3/4” 2’9” 7 9.7 7.9 5.6 11/4 15 12 8.4 11/2 19 16 11 13/4

7/8” 3’3” 11 13 11 7.6 11/4 20 16 11 11/2 26 21 15 2

1” 3’6” 11 17 14 9.8 11/2 26 21 15 13/4 24 28 20 21/4

11/8” 4’ 15 21 17 12 11/2 31 26 18 13/4 42 34 24 23/4

11/4” 4’6” 15 26 21 15 13/4 38 31 22 2 51 42 30 23/4

13/8” 5’ 22 31 25 18 13/4 46 38 27 21/4 — — — —

11/2” 5’6” 22 37 30 21 2 55 45 32 21/4 — — — —

13/4” 6’6” 30 49 40 28 21/4 — — — — — — — —

2” 8’ 37 63 52 37 23/4 — — — — — — — —

6X19

EIP

, IW

RC

6X37

EIP

, IW

RC

Note: Length Tolerances: Single Part Wire Rope Slings - Standard length tolerance is plus or minus two rope diameters, or plus or minus 0.5% of the sling length, whichever us greater. The legs of bridle slings, or matched slings are normally held to within one rope diameter

Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°

Using slings at an angle can become deadly if that angle is not taken into consideration when selecting the sling to be used. The tension on each leg of the sling is increased as the angle of lift, from horizontal, decreases. It is most desirable for a sling to have a larger angle of lift, approaching 90°. Lifts with angles of less than 30° from horizontal are not recommended. If you can measure the angle of lift or the length and height of the sling as rigged, you can determine the properly rated sling for your lift.

Important Consideration - Before buying or using a sling, know as much as possible about the lift you will make to minimize the potential danger to personnel, product and property


Chain Slings

Single

Grade 100 Alloy Chain Sling Working Load Limits (lbs)

Size Single Leg Double Leg / Single Basket Triple and Quad Leg / Double Basket

1/4” 4,300 7,400 6,100 4,300 11,200 9,100 6,4005/16” 5,700 9,900 8,100 5,700 14,800 12,100 8,5003/8” 8,800 15,200 12,400 8,800 22,900 18,700 13,2001/2” 15,000 26,000 21,200 15,000 39,000 31,800 22,5005/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,9003/4” 35,300 61,100 49,900 35,300 91,700 74,900 53,000

6090 60 60

30 30 3045 45 45

Wire Rope Bridle Slings

Bridle Slingswith

Single Part Body

2- Leg Bridle 3- Leg Bridle 4- Leg Bridle

RopeDia.(in)

Min Sling

Length

Eye Hook Cap.

OblongLinkDia.

OblongLinkDia.

OblongLinkDia.

1/4” 1’ 3” 1 1.1 .91 .65 1/2 1.7 1.4 .97 1/2 2.2 1.8 1.3 1/25/16” 1’ 6” 1 1.7 1.4 1.0 1/2 2.6 2.1 1.5 1/2 3.5 2.8 2.0 3/4

3/8” 1’ 8” 11/2 2.5 2.0 1.4 1/2 3.7 3.0 2.2 3/4 5.0 4.1 2.9 3/47/16” 1’ 10” 2 3.4 2.7 1.9 3/4 5.0 4.1 2.9 3/4 6.7 5.5 3.9 1

1/2” 2’ 3 4.4 3.6 2.5 3/4 6.6 5.4 3.8 1 8.8 7.1 5.1 19/16” 2’ 2” 41/2 5.5 4.5 3.2 3/4 8.3 6.8 4.8 1 11 9.0 6.4 11/4

5/8” 2’ 4” 41/2 6.8 5.5 3.9 1 10 8.3 5.9 11/4 14 11 7.8 11/2

3/4” 2’ 9” 7 9.7 709 5.6 11/4 15 12 8.4 11/2 19 16 11 13/4

7/8” 3’ 3” 11 13 11 7.6 11/4 20 16 11 11/2 26 21 15 21 ” 3’ 6” 11 17 14 9.8 11/2 26 21 15 13/4 34 28 20 21/4

11/8” 4’ 15 21 17 12 11/2 31 26 18 13/4 42 34 24 23/4

11/4” 4’ 6” 15 26 21 15 13/4 38 31 22 2 51 42 30 23/4

13/8” 5’ 22 31 25 18 13/4 46 38 27 21/4 - - - -11/2” 5’ 6” 22 37 30 21 2 55 45 32 21/4 - - - -13/4” 6’ 6” 30 49 40 28 21/4 - - - - - - - -

2” 8’ 37 63 52 37 23/4 - - - - - - - -

304560

304560

304560

6 X 1

9 EI

P, IW

RC6X

37 EI

P, IW

RC

Wire Rope SlingsRope

Dia.(in) Vertical Choker Vertical Basket Min Sling Length Standard

Eye Size Thimbled Eye Size

1/4” .65 .48 1.3 1’6” 2 x 4 7/8 x 15/8

5/16” 1.0 .74 2.0 1’9” 21/2 x 5 11/16 x 11/8

3/8” 1.4 1.1 2.9 2’0” 3 x 6 11/8 x 21/8

7/16” 1.9 1.4 3.9 2’3” 31/2 x 7 11/4 x 21/4

1/2” 2.5 1.9 5.1 2’6” 4 x 8 11/2 x 23/4

9/16” 3.2 2.4 6.4 2’9” 41/2 x 9 11/2 x 23/4

5/8” 3.9 2.9 7.8 3’0” 5 x 10 13/4 x 31/4

3/4” 5.6 4.1 11 3’6” 6 x 12 2 x 33/4

7/8” 7.6 5.6 15 4’0” 7 x 14 21/2 x 41/4

1 ” 9.8 7.2 20 4’6” 8 x 16 21/2 x 41/2

11/8” 12 9.1 24 5’0” 9 x 18 27/8 x 51/8

11/4” 15 11 30 5’6” 10 x 20 31/2 x 61/2

13/8” 18 13 36 6’0” 11 x 22 31/2 x 61/4

11/2” 21 16 42 7’0” 12 x 24 31/2 x 61/4

13/4” 28 21 57 8’0” 14 x 28 41/2 x 92” 37 28 73 9’0” 16 x 32 6 x 12

21/4” 44 35 89 10’0” 18 x 36 7 x 1421/2” 54 42 109 11’0” 20 x 40 -

Double

Triple/Quad

Grade 100 Alloy Sling Working Load Limit Specs (lbs)

Type SOO Type SOS Type SOG Type SOF Type SSS Type SGG Type SSG

Type DOS Type DOG Type DOF

Type TOS Type TOG Type QOS Type QOG

1/4” 4300 7400 6100 4300 11,200 9,100 6,400

5/16” 5700 9900 8100 5700 14,800 12,100 8,500

3/8” 8800 15,200 12,400 8800 22,900 18,700 13,200

1/2” 15,000 26,00 21,200 15,000 39,000 31,800 22,500

5/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,900

3/4” 35,300 61,100 49,900 35,300 91,700 74,900 53,000


17

Synthetic Web Slings

Liftex® Flat Synthetic Pro-Edge® Web Slings HD�•��Made�with�flat�loop�eye�on�each�end• Can be used with vertical, basket & choker hitch

types• Pro-Edge® structural edge reinforcement and

abrasion resistance provides maximum sling service life

Item ID Width Ply Vertical WLL (lbs) Choker WLL (lbs)

319-EE1-901XXX 1” 1 1600 1280

319-EE2-901XXX 1” 2 3100 2480

319-EE4-901XXX 1” 4 6200 4960

319-EE1-902XXX 2” 1 3100 2480

319-EE2-902XXX 2” 2 6200 4960

319-EE4-902XXX 2” 4 12,400 9920

319-EE1-903XXX 3” 1 4,650 3720

319-EE2-903XXX 3” 2 9,300 7440

319-EE4-903XXX 3” 4 18,600 14,880

319-EE1-904XXX 4” 1 6,200 4,960

319-EE2-904XXX 4” 2 11,000 8800

319-EE4-904XXX 4” 4 22,000 17,600

Liftex® Endless Synthetic Pro-Edge® Web Slings HD • Continuous loop formed by joining ends of

webbing together with a load-bearing splice•��Design�allows�for�rotation�of�bearing�points• Can be used with vertical, basket & choker hitch

types• Pro-Edge® structural edge reinforcement and

abrasion resistance provides maximum sling service life

Item ID Width Ply Vertical WLL (lbs) Choker WLL (lbs)

319-EN1-901XXX 1” 1 2,200 1,760

319-EN2-901XXX 1” 2 6,200 4,960

319-EN3-901XXX 1” 3 9,300 7,440

319-EN1-902XXX 2” 1 6,200 4,960

319-EN2-902XXX 2” 2 12,400 9,920

319-EN3-902XXX 2” 3 18,600 14,880

Liftex Roundslings • Sling life is extended through rotation of bearing

points• Tighter choker with easier release• Reduce rigging weight and risk of injury

Item ID Color Vertical WLL (lbs) Choker WLL (lbs)

319-ENR01XXX Purple 2600 2100

319-ENR03XXX Yellow 8400 6700

319-ENR02XXX Green 5300 4200

319-ENR04XXX Tan 10,600 8500

319-ENR05XXX Red 13,200 10,600

319-ENR10XXX Orange 25,000 20,000

319-ENR11XXX Orange 53,000 42,400

319-ENR12XXX Orange 66,000 52,800

319-ENR13XXX Orange 90,000 72,000

Also available in Twisted Eye. Recommended when using slings in Choker Hitch

Instructions for Use: Roundslings

Synthetic slings are not be shortened at all, if a shorter sling is needed for a job use a different sling that is properly suited for the application.

Capacities for lifting slings are based on�a�Design�Factor�or�5:1.


Wear Pads

Liftex® Quick-Sleeves Web Wear Pads Heavy Polyester • Abrasion resistant heavy poly protects slings• Hook and loop closure for quick install and

removal

Item ID Sleeve Width Fits Width

319-QSF02XXX-HP 4” 1” & 2”

319-QSF04XXX-HP 6” 3” & 4”

319-QSF06XXX-HP 8” 6”

Liftex® Quick-Sleeves Web Wear Pads Cordura • Abrasion resistant cordura protects slings• Hook and loop closure for quick install and

removal


319-QSF02XXX-C 4” 1” & 2”

319-QSF04XXX-C 6” 3” & 4”

319-QSF06XXX-C 8” 6”

Liftex® Quick-Sleeves Roundsling Wear Pads Heavy Polyester • Abrasion resistant heavy poly protects slings• Hook and loop closure for quick install and

removal


319-QSR02XXX-HP 6” 6”

319-QSR05XXX-HP 8” 8”

319-QSR07XXX-HP 10” 10”

319-QSR09XXX-HP 12” 12”

319-QSR11XXX-HP 14” 14”

319-QSR13XXX-HP 16” 16”

Liftex® Quick-Sleeves Roundsling Wear Pads Cordura • Abrasion resistant cordura protects slings• Hook and loop closure for quick install and

removal


319-QSR02XXX-C 6” 6”

319-QSR05XXX-C 8” 8”

319-QSR07XXX-C 10” 10”

319-QSR09XXX-C 12” 12”

319-QSR11XXX-C 14” 14”

319-QSR13XXX-C 16” 16”

We offer a variety of specialty webbing products to suite your special application.

If you do not see what you are looking for please contact customer service to help determine the sling

to suite your CUSTOM SIZE and application needs.•� Custom�widths�and�lengths�can�be�produced�to�fit�your�specific�requirement• Custom Bridle/Multi-Leg slings are available with sling hooks•� Web�slings�can�be�fitting�with�triangle�and�choker�fittings�• Specialty eye treatments are available to reduce the wear in the eye area thereby extending sling life.• Wear resistant webbing is available for abrasive, environmentally or chemically harsh environments and applications. •� RFID�chips�are�optional�on�Pro-Edge�slings�

EMAIL [email protected]


19

Chain

G30 Proof Coil Chain SC • Made From Low Carbon Steel•�Self�Colored�(SC)�finish•�Do�not�use�for�overhead�lifting


120-G30/0187-XXXX 3/16” 750 250’,750’1500’

120-G30/0250-XXXX 1/4” 1250 133’,400’800’

120-G30/0312-XXXX 5/16” 1900 92’,275’,550’

120-G30/0375-XXXX 3/8” 2650 66’,200’,400’

120-G30/0500-XXXX 1/2” 4,500 33’,100’,200’, 200’

120-G30/0625-XXXX 5/8” 6,900 75’,150’

120-G30/0750-XXXX 3/4” 10,600 100’

G30 Proof Coil Chain EG • Made From Low Carbon Steel•��Electoplated�finish•��Do�not�use�for�overhead�lifting


121-G30/0187-XXXX 3/16” 750 250’,750’1500’

121-G30/0250-XXXX 1/4” 1250 133’,400’800’

121-G30/0312-XXXX 5/16” 1900 92’,275’,550’

121-G30/0375-XXXX 3/8” 2650 66’,200’,400’

121-G30/0500-XXXX 1/2” 4500 33’,100’,200’

121-G30/0625-XXXX 5/8” 6900 75’,150’

G30 Proof Coil Chain HG • Imported, hot-dip galvanized and made from

low carbon steel• Excellent general-purpose chain of standard

commercial quality• G30 Proof Coil Chain is frequently used for

fabricating towing chains, binding chains, tie down chains and logging chains

•�Do�not�use�for�overhead�lifting


122-G30/0187-XXXX 3/16” 750 250’,750’1500’

122-G30/0250-XXXX 1/4” 1250 133’,400’800’

122-G30/0312-XXXX 5/16” 1900 92’,275’,550’

122-G30/0375-XXXX 3/8” 2650 66’,200’,400’

122-G30/0500-XXXX 1/2” 4500 33’,100’,200’

122-G30/0625-XXXX 5/8” 6900 75’,150’

122-G30/0750-XXXX 3/4” 10,600 100’

G30 Proof Coil Chain SS • Type 316 stainless steel• Offers superior strength and rust resistance•��Do�not�use�for�overhead�lifting

Item ID Size WLL (lbs) Available Put Ups

124-G30/316/0125-XXXX 1/8” 375 per ft, 1000’, 2000’, 2000’

124-G30/316/0187-XXXX 3/16” 1200 per ft, 500’, 750’, 1500’

124-G30/316/0250-XXXX 1/4” 2000 per ft, 400’, 800’

124-G30/316/0312-XXXX 5/16” 2850 per ft, 275’, 550’’

124-G30/316/0375-XXXX 3/8” 3550 per ft, 200’, 400’

124-G30/316/0500-XXXX 1/2” 6500 per ft, 100’, 200’

G70 Transport Chain YC • Imported Transport Chain with a yellow chromate�finish

• Made from heat treated carbon steel•��Do�not�use�for�overhead�lifting

Item ID Size WLL (lbs) Available Put Ups

123-G70/0250-XXXX 1/4” 3150 133’, 400’, 800’

123-G70/0312-XXXX 5/16” 4700 92’, 275’, 550’

123-G70/0375-XXXX 3/8” 6600 66’, 200’, 400’

123-G70/0625-XXXX 1/2” 11,300 33’, 100’, 200’

123-G70/0625-XXXX 5/8” 15,800 75’, 150’

Crosby® G100 Lifting Chain Alloy• Alloy Steel• Heat Treated• Finish – Black rust preventative coating• Proof Tested at 2 times the Working Load�Limit�with�certification

Item ID Size WLL (lbs) Put Up (ft) Weight

307-272710-000 1/4” 4300 Per ft 0.73 lbs

307-273710 1/4” 4300 500 376.00 lbs

307-273729-000 5/16” 5700 Per ft 1.03 lbs

307-273729 5/16” 5700 500 565.00 lbs

307-273738-000 3/8” 8800 Per ft 1.40 lbs

307-273738 3/8” 8800 500 740.00 lbs

307-273747-000 1/2” 15,000 Per ft 2.60 lbs

307-273747 1/2” 15,000 300 747.00 lbs

307-273756-000 5/8” 22,600 Per ft 3.38 lbs

307-273756 5/8” 22,600 200 757.00 lbs

307-273858 3/4” 35,300 100 584.00 lbs

307-273876 1” 59,700 75 1010.00 lbs

Double Loop Chain EG• Ideal for playground and gymnasium

equipment, farm and animal chain• Low Carbon Steel• Electro Galvanized Finish

Item ID Size MBS (lbs) Put Up (ft) Weight

126-DL03-0100 #3 90 100’ 5.75 lbs

126-DL2/0-0250 2/0 255 250’ 44.00 lbs

Single Jack Chain EG•��Ideal�for�fixture�and�novelty�suspension,�

and/or general utility• Low Carbon Steel• Electro Galvanized, SC Finish

Item ID Size MBS (lbs) Put Up (ft) Weight

126-SJ06-0100 #6 95 100’ 35.00 lbs

126-SJ08-0250 #8 60 250’ 52.00 lbs

126-SJ10-0250 #10 47 250’ 38.00 lbs

126-SJ12-0250 #12 29 250’ 24.00 lbs


Turnbuckles

Hook & Hook Turnbuckles•��Drop�forged• Hot dip galvanized

Item ID Size Take-up Closed OAL (in)

WLL (lbs) Weight

115-TBHH0250X04 1/4” 4” 8.25” 400 0.30 lbs

115-TBHH0312X04.5 5/16” 4-1/2” 9.56” 700 0.53 lbs

115-TBHH0375X06 3/8” 6” 11.88” 1000 0.75 lbs

115-TBHH0500X06 1/2” 6” 13.30” 1500 1.50 lbs

115-TBHH0500X09 1/2” 9” 16.30” 1500 1.80 lbs

115-TBHH0500X12 1/2” 12” 19.30” 1500 2.19 lbs

115-TBHH0625X06 5/8” 6” 15.50” 2250 2.75 lbs

115-TBHH0625X09 5/8” 9” 18.50” 2250 3.00 lbs

115-TBHH0625X12 5/8” 12” 21.50” 2250 3.50 lbs

115-TBHH0750X06 3/4” 6” 17.00” 3000 3.75 lbs

115-TBHH0750X09 3/4” 9” 20.00” 3000 4.50 lbs

115-TBHH0750X12 3/4” 12” 23.00” 3000 5.75 lbs

115-TBHH0750X18 3/4” 18” 29.00” 3000 7.00 lbs

115-TBHH0875X12 7/8” 12” 24.63” 4000 9.35 lbs

115-TBHH0875X18 7/8” 18” 30.63” 4000 10.25 lbs

115-TBHH1000X06 1” 6” 20.63” 5000 11.10 lbs

115-TBHH1000X12 1” 12” 26.63” 5000 12.00 lbs

Eye & Hook Turnbuckles•��Drop�forged• Hot dip galvanized

Item ID Size Take-up Closed OAL (in) WLL (lbs) Weight

115-TBEH0250X04 1/4” 4” 8.25” 400 0.30 lbs

115-TBEH0312X04.5 5/16” 4-1/2” 9.56” 700 0.53 lbs

115-TBEH0375X06 3/8” 6” 11.88” 1000 0.75 lbs

115-TBEH0500X06 1/2” 6” 13.30” 1500 1.60 lbs

115-TBEH0500X09 1/2” 9” 16.30” 1500 1.82 lbs

115-TBEH0500X12 1/2” 12” 19.30” 1500 2.18 lbs

115-TBEH0625X06 5/8” 6” 15.50” 2250 2.71 lbs

115-TBEH0625X09 5/8” 9” 18.50” 2250 2.84 lbs

115-TBEH0625X12 5/8” 12” 21.50” 2250 3.67 lbs

115-TBEH0750X06 3/4” 6” 17.00” 3000 3.75 lbs

115-TBEH0750X09 3/4” 9” 20.00” 3000 4.50 lbs

115-TBEH0750X12 3/4” 12” 23.00” 3000 5.75 lbs

115-TBEH0750X18 3/4” 18” 29.00” 3000 7.25 lbs

115-TBEH0875X12 7/8” 12” 24.63” 3000 8.38 lbs

115-TBEH0875X18 7/8” 18” 30.63” 4000 10.25 lbs

115-TBEH1000X06 1” 6” 20.63” 4000 11.10 lbs

115-TBEH1000X12 1” 12” 26.63” 5000 12.00 lbs

Eye & Eye Turnbuckles •��Drop�forged• Hot dip galvanized


WLL (lbs) Weight

115-TBEE0250X04 1/4” 4” 8.25” 500 0.30 lbs

115-TBEE0312X04.50 5/16” 4-1/2” 9.56” 800 0.50 lbs

115-TBEE0375X06 3/8” 6” 11.88” 1200 0.75 lbs

115-TBEE0500X06 1/2” 6” 13.31” 2200 1.46 lbs

115-TBEE0500X09 1/2” 9” 16.31” 2200 1.75 lbs

115-TBEE0500X12 1/2” 12” 19.31” 2200 2.19 lbs

115-TBEE0625X06 5/8” 6” 15.50” 3500 2.63 lbs

115-TBEE0625X09 5/8” 9” 18.50” 3500 3.00 lbs

115-TBEE0625X12 5/8” 12” 21.50” 3500 3.50 lbs

115-TBEE0750X06 3/4” 6” 17.00” 5200 4.25 lbs

115-TBEE0750X09 3/4” 9” 20.00” 5200 5.00 lbs

115-TBEE0750X12 3/4” 12” 23.00” 5200 5.46 lbs

115-TBEE0750X18 3/4” 18” 29.00” 5200 7.25 lbs

115-TBEE0875X12 7/8” 12” 24.63” 7200 8.88 lbs

115-TBEE0875X18 7/8” 18” 30.63” 7200 10.25 lbs

115-TBEE1000X06 1” 6” 20.63” 10,000 11.10 lbs

115-TBEE1000X12 1” 12” 26.63” 10,000 11.25 lbs

115-TBEE1000X18 1” 18” 32.63” 15,200 14.00 lbs

115-TBEE1000X24 1” 24” 38.63” 15,200 17.00 lbs

115-TBEE1250X12 1-1/4” 12” 29.88” 15,200 21.20 lbs

115-TBEE1250X18 1-1/4” 18” 35.88” 15,200 24.10 lbs

115-TBEE1250X24 1-1/4” 24” 41.88” 15,200 25.00 lbs

115-TBEE1500X12 1-1/2” 12” 30.50” 21,400 27.00 lbs

115-TBEE1500X18 1-1/2” 18” 36.50” 21,400 31.00 lbs

115-TBEE1500X24 1-1/2” 24” 42.50” 21,400 38.00 lbs

115-TBEE2000X24 2” 24” 51.70” 37,000 88.00 lbs

Stub & Stub Turnbuckles •��Drop�forged• Hot dip galvanized• Stub End Turnbuckles are not rated


WLL (lbs) Weight

115-TBSS0375X06 3/8” 6” 16.00” 1,200 0.75 lbs

115-TBSS0500X06 1/2” 6” 16.00” 2,200 1.25 lbs

115-TBSS0625X06 5/8” 6” 16.00” 3,500 2.11 lbs

115-TBSS0750X06 3/4” 6” 17.00” 5,200 3.27 lbs

115-TBSS0875X06 7/8” 6” 18.00” 7,200 4.78 lbs

115-TBSS1000X06 1” 6” 19.00” 10,000 6.36 lbs

115-TBSS1500X06 1-1/2” 6” 20.50” 21,000 15.00 lbs


21

Turnbuckles

Eye & Jaw Turnbuckles•��Drop�forged• Hot dip galvanized


WLL (lbs) Weight

115-TBEJ0250X04 1/4” 4” 8.29” 500 0.32 lbs

115-TBEJ0312X04.5 5/16” 4-1/2” 9.78” 800 0.47 lbs

115-TBEJ0375X06 3/8” 6” 11.88” 1200 0.76 lbs

115-TBEJ0500X06 1/2” 6” 13.31” 2200 1.50 lbs

115-TBEJ0500X09 1/2” 9” 16.31” 2200 1.75 lbs

115-TBEJ0500X12 1/2” 12” 19.25” 2200 2.20 lbs

115-TBEJ0625X06 5/8” 6” 15.50” 3500 2.65 lbs

115-TBEJ0625X09 5/8” 9” 18.50” 3500 3.00 lbs

115-TBEJ0625X12 5/8” 12” 21.50” 3500 3.78 lbs

115-TBEJ0750X06 3/4” 6” 17.00” 5200 4.50 lbs

115-TBEJ0750X09 3/4” 9” 20.00” 5200 5.00 lbs

115-TBEJ0750X12 3/4” 12” 21.50” 5200 5.76 lbs

115-TBEJ0750X18 3/4” 18” 27.19” 5200 7.50 lbs

115-TBEJ0875X12 7/8” 12” 22.34” 7200 9.00 lbs

115-TBEJ1000X18 1” 18” 30.34” 10,000 0.00 lbs

115-TBEJ1000X24 1” 24” 36.34” 10,000 16.80 lbs

115-TBEJ0875X18 7/8” 18” 28.34” 7200 10.25 lbs

115-TBEJ1000X06 1” 6” 18.34” 10,000 11.10 lbs

115-TBEJ1000X12 1” 12” 24.34” 10,000 12.00 lbs

115-TBEJ1250X12 1-1/4” 12” 26.82” 15,200 21.20 lbs

115-TBEJ1500X12 1-1/2” 12” 28.50” 21,400 27.00 lbs

115-TBEJ1250X18 1-1/4” 18” 32.82” 15,200 24.20 lbs

115-TBEJ1250X24 1-1/4” 24” 38.82” 15,200 28.00 lbs

115-TBEJ1500X18 1-1/2” 18” 34.50” 21,400 35.00 lbs

115-TBEJ1500X24 1-1/2” 24” 40.50” 21,400 44.00 lbs

Jaw & Jaw Turnbuckles•��Drop�forged• Hot dip galvanized

Item ID Size Take-up

Closed OAL (in)

WLL (lbs) Weight

115-TBJJ0250X04 1/4” 4” 8.29” 500 0.39 lbs

115-TBJJ0312X04.5 5/16” 4-1/2” 9.78” 800 0.54 lbs

115-TBJJ0375X06 3/8” 6” 11.88” 1200 0.81 lbs

115-TBJJ0500X06 1/2” 6” 13.31” 2200 1.57 lbs

115-TBJJ0500X09 1/2” 9” 16.31” 2200 1.95 lbs

115-TBJJ0500X12 1/2” 12” 19.31” 2200 2.18 lbs

115-TBJJ0625X06 5/8” 6” 15.50” 3500 2.90 lbs

115-TBJJ0625X09 5/8” 9” 18.50” 3500 3.35 lbs

115-TBJJ0625X12 5/8” 12” 21.50” 3500 4.00 lbs

115-TBJJ0750X06 3/4” 6” 17.00” 5200 4.30 lbs

115-TBJJ0750X09 3/4” 9” 20.00” 5200 4.50 lbs

115-TBJJ0750X12 3/4” 12” 23.00” 5200 5.88 lbs

115-TBJJ0750X18 3/4” 18” 29.00” 5200 7.53 lbs

115-TBJJ0875X12 7/8” 12” 24.63” 7200 8.63 lbs

115-TBJJ0875X18 7/8” 18” 30.63” 7200 10.25 lbs

115-TBJJ1000X06 1” 6” 20.63” 10,000 9.44 lbs

115-TBJJ1000X12 1” 12” 26.63” 10,000 11.65 lbs

115-TBJJ1000X18 1” 18” 32.63” 10,000 16.10 lbs

115-TBJJ1000X24 1” 24” 34.72” 10,000 17.00 lbs

115-TBJJ1250X12 1-1/4” 12” 25.34” 15,200 19.00 lbs

115-TBJJ1250X18 1-1/4” 18” 31.34” 15,200 26.35 lbs

115-TBJJ1250X24 1-1/4” 24” 37.34” 15,200 31.00 lbs

115-TBJJ1500X12 1-1/2” 12” 26.50” 21,400 27.00 lbs

115-TBJJ1500X18 1-1/2” 18” 32.50” 21,400 31.20 lbs

115-TBJJ1500X24 1-1/2” 24” 38.50” 21,400 38.20 lbs

115-TBJJ2000X24 2” 24” 50.75” 37,000 198.00 lbs

Turnbuckles

HOOK & HOOK EYE & HOOK EYE & EYE

EYE & JAW JAW & JAW STUB & STUB


Shackles

Screw Pin Anchor Shackles• Forged with alloy pins• Meets the performance requirements of Federal�Specification�RR-C-271D�Type�IVA, Grade A, Class 1, except for those provisions required of the contractor

• Working load limit permanently shown on every shackle

Item ID Size WLL (tons) Weight

115-SHACKSPA0187 3/16” 0.5 0.06 lbs

115-SHACKSPA0250 1/4” 0.5 0.10 lbs

115-SHACKSPA0312 5/16” 0.75 0.19 lbs

115-SHACKSPA0375 3/8” 1 0.31 lbs

115-SHACKSPA0437 7/16” 1.5 0.38 lbs

115-SHACKSPA0500 1/2” 2 0.72 lbs

115-SHACKSPA0625 5/8” 3.25 1.37 lbs

115-SHACKSPA0750 3/4” 4.75 2.35 lbs

115-SHACKSPA0875 7/8” 6.5 3.50 lbs

115-SHACKSPA1000 1” 8.5 5.03 lbs

115-SHACKSPA1125 1-1/8” 9.5 7.00 lbs

115-SHACKSPA1250 1-1/4” 12 9.50 lbs

115-SHACKSPA1375 1-3/8” 13.5 13.53 lbs

115-SHACKSPA1500 1-1/2” 17 17.20 lbs

115-SHACKSPA1750 1-3/4” 25 27.78 lbs

115-SHACKSPA2000 2” 35 45.00 lbs

115-SHACKSPA2500 2-1/2” 55 86.00 lbs

Round Pin Anchor Shackles• Forged with alloy pins• Meets the performance requirements of Federal Specification�RR-C-271D�Type�IVA,�Grade�A,�Class�1, except for those provisions required of the contractor

• Working load limit permanently shown on every shackle


115-SHACKRPA0187 3/16” 0.33 0.15 lbs

115-SHACKRPA0250 1/4” 0.5 0.15 lbs

115-SHACKRPA0312 5/16” 0.75 0.20 lbs

115-SHACKRPA0375 3/8” 1 0.29 lbs

115-SHACKRPA0437 7/16” 1.5 0.38 lbs

115-SHACKRPA0500 1/2” 2 0.75 lbs

115-SHACKRPA0625 5/8” 3.25 0.00 lbs

115-SHACKRPA0750 3/4” 4.75 2.00 lbs

115-SHACKRPA0875 7/8” 6.5 0.00 lbs

115-SHACKRPA1000 1” 8.5 5.32 lbs

115-SHACKRPA1125 1-1/8” 9.5 7.00 lbs

Bolt Type Anchor Shackles• Bolt Type Anchor Shackle with thin head

bolt - nut with cotter pin• Forged with alloy pins• Meets the performance requirements of Federal�Specification�RR-C-271D�Type�IVA, Grade A, Class 3, except for those provisions required of the contractor

• Working load limit permanently shown on every shackle. Hot dip galvanized


115-SHACKBTA0250 1/4” 0.5 0.17 lbs

115-SHACKBTA0312 5/16” 0.75 0.22 lbs

115-SHACKBTA0375 3/8” 1 0.40 lbs

115-SHACKBTA0437 7/16” 1.5 0.48 lbs

115-SHACKBTA0500 1/2” 2 0.79 lbs

115-SHACKBTA0625 5/8” 3.25 1.54 lbs

115-SHACKBTA0750 3/4” 4.75 2.53 lbs

115-SHACKBTA0875 7/8” 6.5 3.95 lbs

115-SHACKBTA1000 1” 8.5 5.95 lbs

115-SHACKBTA1125 1-1/8” 9.5 7.00 lbs

T304 SS Screw Pin Anchor Shackles• Type 304 Stainless Steel Screw Pin

Anchor Shackle meets the performance requirements�of�Federal�Specification�RR-C-271D,�Type�IVA,�Class�2

• Forged with alloy pins• Meets the performance requirements of Federal�Specification�RR-C-271D�Type�IVA,�Grade A, Class 3, except for those provisions required of the contractor

• Working load limit permanently shown on every shackle. Hot dip galvanized

Item ID Size WLL (tons Weight

116-304-SHACKSPA0187 3/16” 0.33 0.04 lbs

116-304-SHACKSPA0250 1/4” .5 0.12 lbs

116-304-SHACKSPA0312 5/16” .75 0.18 lbs

116-304-SHACKSPA0375 3/8” 1 0.31 lbs

116-304-SHACKSPA0437 7/16” 1.5 0.44 lbs

116-304-SHACKSPA0500 1/2” 2 0.70 lbs

116-304-SHACKSPA0625 5/8” 3.25 1.00 lbs

116-304-SHACKSPA0750 3/4” 4.75 1.67 lbs

116-304-SHACKSPA0875 7/8” 6.5 2.53 lbs

116-304-SHACKSPA1000 1” 8.5 5.50 lbs

116-304-SHACKSPA1125 1-1/8” 9.5 6.00 lbs



23

Eye Hoist / Grab Hooks

Eye Hoist Hooks Carbon• Our Carbon Eye Hoist Hooks are quenched and

tempered to give maximum strength

Item ID WLL (tons) Weight

115-HKEHC0.75TL 0.75 0.62 lbs

115-HKEHC01TL 1 0.82 lbs

115-HKEHC01.5TL 1.5 1.45 lbs




115-HKEHC07.5TL 7.5 15.12 lbs

115-HKEHC10TL 10 21.60 lbs

115-HKEHC15TL 15 39.50 lbs

Eye Hoist Hooks Alloy• Our Alloy Eye Hoist Hooks are quenched

and tempered to give maximum strength

Item ID WLL (tons) Weight

115-HKEHA01TL 1 0.60 lbs

115-HKEHA01.5TL 1.5 0.90 lbs



115-HKEHA04.5TL 4.5 4.30 lbs



115-HKEHA11TL 11 15.12 lbs

115-HKEHA15TL 15 21.60 lbs

Clevis Grab Hooks G43• Hot forged, heat treated and tempered•��Designed�for�use�with�welded�chain• Not recommended for overhead lifting sling

applications

Item ID Size Type WLL (lbs) Weight

115-HKCG43/250EG 1/4” Zinc Plated 2600 0.34 lbs

115-HKCG43/250SC 1/4” Self-colored 2600 0.34 lbs







Clevis Grab Hooks G70• Hot forged, heat treated and tempered•��Designed�specifically�for�transport�grade�70�chain• Note: Not recommended for overhead lifting sling

applications

Item ID Size WLL (lbs) Weight

115-HKCG70/250YC 1/4” 3150 0.36 lbs

115-HKCG70/312YC 5/16” 4700 0.62 lbs

115-HKCG70/375YC 3/8” 6600 1.00 lbs

115-HKCG70/500YC 1/2” 11,300 2.35 lbs

MONTHLY SPECI ALS

We have monthly Sales & Promotions! EMAIL US

at [email protected] to get on our Email & Fax lists


Clevis Slip Hooks / Pear Links

Clevis Slip Hooks G43• Wide throat for shackles,

chain tied loads• For use with Grade 30 proof

coil or grade 40 high test chain

• Not recommended for overhead lifting

• ‘L’ - Latch type


115-HKCS43/250EG 1/4” 1950 0.58 lbs

115-HKCS43/250EGL 1/4” 1950 0.58 lbs

115-HKCS43/312EG 5/16” 2875 0.86 lbs

115-HKCS43/312EGL 5/16” 2875 0.86 lbs

115-HKCS43/375EG 3/8” 4000 1.21 lbs

115-HKCS43/375EGL 3/8” 4000 1.21 lbs

115-HKCS43/500EG 1/2” 6500 2.20 lbs

115-HKCS43/500EGL 1/2” 6500 2.85 lbs

Clevis Slip Hooks G70• Wide throat for shackles, chain tied loads• For use with Grade 70

Transport Chain• Not recommended for

overhead lifting• ‘L’ - Latch type


115-HKCS70/250YC 1/4” 3150 0.50 lbs

115-HKCS70/250YCL 1/4” 3150 0.58 lbs

115-HKCS70/312YC 5/16” 4700 0.91 lbs

115-HKCS70/312YCL 5/16” 4700 0.91 lbs

115-HKCS70/375YC 3/8” 6600 1.61 lbs

115-HKCS70/375YCL 3/8” 6600 1.61 lbs

115-HKCS70/500YC 1/2” 11,300 2.80 lbs

115-HKCS70/500YCL 1/2” 11,300 3.00 lbs

Pear Links Carbon Import SC• 100% Proof Tested• Carbon Steel• Quenched and Tempered


115-PL0375 3/8” 1800 0.25 lbs

115-PL0500 1/2” 2900 0.55 lbs

115-PL0625 5/8” 4200 1.12 lbs

115-PL0750 3/4” 6000 1.90 lbs

115-PL0875 7/8” 8300 2.70 lbs

115-PL1000 1” 10,800 4.60 lbs

Master Links• 100% Proof Tested•��Drop�Forged�Using�Special�Bar�Quality�

Alloy Steel• Quenched and Tempered


115-ML0500 1/2” 2900 0.84 lbs

115-ML0625 5/8” 4200 1.52 lbs

115-ML0750 3/4” 12,300 2.20 lbs

115-ML1000 1” 20,300 5.00 lbs

115-ML1250 1-1/4” 36,000 9.10 lbs

115-ML1500 1-1/2” 54,300 16.25 lbs

115-ML1750 1-3/4” 84,900 26.15 lbs

115-ML2000 2” 102,600 38.05 lbs


RIGGING HARDWARE


25

Connecting Links

Eye Nuts• Made of high quality drop forged steel• Loads are based on a safety factor of 5

to 1 Note: Loads shown apply to Eye Nuts only, based on a vertical pull, and not to any connecting bolt or stud

Item ID Size Tap Size WLL (lbs) Weight

115-EYENUT0250/312 1/4” 5/16” 850 0.10 lbs

115-EYENUT0312/375 5/16” 3/8” 1250 0.16 lbs

115-EYENUT0375/500 3/8” 1/2” 2250 0.28 lbs

115-EYENUT0500/625 1/2” 5/8” 3600 0.60 lbs

115-EYENUT0625/750 5/8” 3/4” 5200 1.00 lbs

115-EYENUT0750/875 3/4” 7/8” 7200 1.70 lbs

115-EYENUT0750/1000 3/4” 1” 7200 1.60 lbs

115-EYENUT0875/1000 7/8” 1” 10,000 2.75 lbs

115-EYENUT1000/1000 1” 1” 10,000 3.85 lbs

Connecting Links• Electro Galvanized• Commercial grade

Item ID Size Material WLL (lbs) Weight

115-CLINK187EG 3/16” Zinc Plated 800 0.03 lbs






Lap Links• Commercial grade


115-LLINK125 1/8” Zinc Plated 120 0.20 lbs






Hammerlocks • Commercial grade


115-GR80HL281 9/32” 3500 0.02 lbs

115-GR80HL375 3/8” 7100 0.08 lbs

115-GR80HL200 1/2” 12,000 0.17 lbs

Cold Shuts • Commercial grade


115-CSHUT187 3/16” Zinc Plated 750 0.02 lbs





Oval Quick Links• Made from mild stee• Zinc Plated


115-QL125 1/8” 220 0.02 lbs

115-QL187 3/16” 400 0.05 lbs

115-QL250 1/4” 880 0.07 lbs

115-QL312 5/16” 1760 0.16 lbs

115-QL375 3/8” 2200 0.29 lbs

115-QL500 1/2” 2860 0.48 lbs

115-QL562 9/16” 3300 0.77 lbs

115-QL625 5/8” 4000 1.10 lbs


Connecting Links

Wide Jaw Quick Links• Made from mild steel• Zinc plated•��Do�not�use�for�lifting


115-QLW125 1/8” 1102 0.04 lbs

115-QLW187 3/16” 3086 0.06 lbs

115-QLW250 1/4” 880 0.09 lbs

115-QLW312 5/16” 1760 0.10 lbs

115-QLW375 3/8” 1760 0.30 lbs

SS Oval Quick Links• Made from Type 316 stainless steel•��Do�not�use�for�lifting


116-316-QL125 1/8” 200 0.02 lbs

116-316-QL187 3/16” 800 0.05 lbs

116-316-QL250 1/4” 1200 0.07 lbs

116-316-QL312 5/16” 2000 0.16 lbs

116-316-QL375 3/8” 3500 0.29 lbs

116-316-QL500 1/2” 5000 0.48 lbs

116-316-QL562 9/16” 7700 0.77 lbs

S Hooks ZP• S Hooks ZP are used in low-working

load limit applications for attaching accessories to chain.

Item ID Size Shank Length Finish Weight

115-SHOOK062X01 1/16” 1” Zinc Plated 0.01 lbs

115-SHOOK125X01 1/8” 1” Zinc Plated 0.01 lbs

115-SHOOK156X01.75 5/32” 1-3/4” Zinc Plated 0.01 lbs





#2450 Springhooks• Zinc Plated• Commercial grade

Item ID Size Finish WLL (lbs) Weight

115-SPHK2450-187N 3/16” Zinc Plated 220 0.03 lbs





#2451 Springhooks w Eyes• Zinc Plated• Commercial grade


115-SPHK2451-187E 3/16” Zinc Plated 220 0.03 lbs




SS #2450 Springhooks• 316 Stainless Steel• Commercial grade


116-316-SPHK2450-187N 3/16” Stainless Steel 220 0.04 lbs



SS #2451 Springhooks w Eyes• 316 Stainless Steel• Formed and commercial grade

Item ID Size Finish WLL (tons) Weight

116-316-SPHK2451-187E 3/16” Stainless Steel 220 0.04 lbs




27

Eyebolts

Machinery Eye Bolts•��Drop�forged�steel• Heat treated

Item ID Size Shank Length WLL (lbs) Weight

115-MEB0250X01 1/4” 1” 500 0.06 lbs

115-MEB0312X01.125 5/16” 1-1/8” 900 0.06 lbs

115-MEB0437X01.375 7/16” 1-3/8” 2000 0.21 lbs

115-MEB0500X01.5 1/2” 1-1/2” 2600 0.38 lbs

115-MEB0625X01.75 5/8” 1-3/4” 4000 0.75 lbs

115-MEB0750X2.00 3/4” 2” 5000 0.88 lbs

115-MEB0875X02.25 7/8” 2-1/4” 7000 1.35 lbs

115-MEB1000X02.50 1” 2-1/2” 9000 2.35 lbs

Machinery Shoulder Eye Bolts•��Drop�forged�steel• Heat treated

Item ID Size Shank Length WLL (lbs) Weight

115-MEBSH0250X01 1/4” 1” 500 0.06 lbs

115-MEBSH0312X01.125 5/16” 1-1/8” 900 0.10 lbs

115-MEBSH0375X01.25 3/8” 1-1/4” 1600 0.16 lbs

115-MEBSH0437X01.375 7/16” 1-3/8” 2000 0.21 lbs

115-MEBSH0500X01.50 1/2” 1-1/2” 2400 0.30 lbs

115-MEBSH0562X01.625 9/16” 1-5/8” 3000 0.49 lbs

115-MEBSH0625X01.75 5/8” 1-3/4” 4000 0.74 lbs

115-MEBSH0750X02 3/4” 2” 5000 1.00 lbs

115-MEBSH0875X02.25 7/8” 2-1/4” 7000 1.73 lbs

115-MEBSH1000X02.50 1” 2-1/2” 9000 2.35 lbs

115-MEBSH1250X03.00 1-1/4” 3” 15,000 4.63 lbs

Forged Nut Eye Bolts•��Drop�forged�steel• Heat treated• Machine threaded

Item ID Size Length WLL (lbs) Weight

115-NEB0250X02 1/4” 2” 500 0.06 lbs

115-NEB0250X04 1/4” 4” 500 0.12 lbs

115-NEB0312X02.25 5/16” 2-1/4” 800 0.13 lbs

115-NEB0312X04.25 5/16” 4-1/2” 800 0.25 lbs

115-NEB0375X02.5 3/8” 2-1/2” 1200 0.24 lbs

115-NEB0375X04.5 3/8” 4-1/2” 1200 0.31 lbs

115-NEB0375X06 3/8” 6” 1200 0.43 lbs

115-NEB0500X03.25 1/2” 3-1/4” 2200 0.50 lbs

115-NEB0500X06 1/2” 6” 2200 0.62 lbs

115-NEB0500X08 1/2” 8” 2200 0.75 lbs

115-NEB0500X10 1/2” 10” 2200 0.88 lbs

115-NEB0500X12 1/2” 12” 2200 1.00 lbs

115-NEB0625X04 5/8” 4” 3500 0.95 lbs

115-NEB0625X06 5/8” 6” 3500 1.17 lbs

115-NEB0625X08 5/8” 8” 3500 1.29 lbs

115-NEB0625X10 5/8” 10” 3500 1.43 lbs

115-NEB0625X12 5/8” 12” 3500 1.66 lbs

115-NEB0625X15 5/8” 15” 3500 1.98 lbs

115-NEB0625X18 5/8” 18” 3500 2.19 lbs

115-NEB0625X21 5/8” 21” 3500 2.49 lbs

115-NEB0625X24 5/8” 24” 3500 2.82 lbs

115-NEB0750X04.5 3/4” 4-1/2” 5200 1.68 lbs

115-NEB0750X06 3/4” 6” 5200 1.80 lbs

115-NEB0750X08 3/4” 8” 5200 2.00 lbs

115-NEB0750X10 3/4” 10” 5200 2.38 lbs

115-NEB0750X12 3/4” 12” 5200 2.52 lbs

115-NEB0750X15 3/4” 15” 5200 2.75 lbs

115-NEB0875X05 7/8” 5” 7200 2.50 lbs

115-NEB0875X08 7/8” 8” 7200 2.96 lbs

115-NEB1000X06 1” 6” 10,000 3.01 lbs

115-NEB1000X09 1” 9” 10,000 3.83 lbs

115-NEB1000X12 1” 12” 10,000 4.50 lbs

115-NEB0875X06 7/8” 6” 7200 2.84 lbs

115-NEB0875X12 7/8” 12” 7200 3.87 lbs

Shoulder EyeboltThe threaded shank must protrude through the load�sufficiently�to�allow�full�engagement� of the nut.

If the eyebolt protrudes so far through the load that the nut can’t be tightened securely against the load, use properly sized washers to take up the excess space between the nut and the load.

Thickness of spacers must exceed this distance between the bottom of the load and the last thread of the eyebolt.


Eyebolts

Forged Shoulder Eye Bolts•��Drop�Forged�Steel• Galvanized Finish• Heat Treated• Machine Threaded and assembled with

hex nuts tapped oversize


115-SHEB0250X02 1/4” 2” 500 0.07 lbs

115-SHEB0250X04 1/4” 4” 500 0.08 lbs

115-SHEB0312X02.25 5/16” 2-1/4” 800 0.13 lbs

115-SHEB0312X04.25 5/16” 4-1/4” 800 0.17 lbs

115-SHEB0375X02.5 3/8” 2-1/4” 1200 0.21 lbs

115-SHEB0375X04.5 3/8” 4-1/4” 1200 0.32 lbs

115-SHEB0375X06 3/8” 6” 1200 0.38 lbs

115-SHEB0500X03.25 1/2” 3-1/4” 2200 0.38 lbs

115-SHEB0500X06 1/2” 6” 2200 0.57 lbs

115-SHEB0500X08 1/2” 8” 2200 0.63 lbs

115-SHEB0625X04 5/8” 4” 3500 0.69 lbs

115-SHEB0625X06 5/8” 6” 3500 1.00 lbs

115-SHEB0750X04.5 3/4” 4-1/4” 5200 1.45 lbs

115-SHEB0750X06 3/4” 6” 5200 2.00 lbs

115-SHEB1000X06 1” 6” 10,000 3.75 lbs

115-SHEB1000X09 1” 9” 10,000 4.29 lbs

115-SHEB0500X10 1/2” 10” 2200 1.25 lbs

115-SHEB0500X12 1/2” 12” 2200 1.50 lbs

Shoulder Lag Eye Screws HG• Use for connecting hand lines, spiders webs to trees and more

on challenge courses• Not To be used for life support!• Hot dipped galvanized


115-SLES250X02 1/4” 2” 500 0.05 lbs

115-SLES312X02.25 5/16” 2-1/4” 800 0.06 lbs

115-SLES375X02.50 3/8” 2-1/2” 1200 0.20 lbs

115-SLES500X03.25 1/2” 3-1/4” 2200 0.42 lbs

115-SLES625X04 5/8” 4” 3500 0.65 lbs

115-SLES750X04.50 3/4” 4-1/2” 5200 1.20 lbs

Fixed Eye Single Wire Rope Block• Combination of bronze and steel bushings, designed

for high load and medium speed applications• Oiled Bushings for permanent self-lubrication

Item ID Max Cable Length (in) WLL (lbs) Style Weight

300-01568 3/16” 525 0.50 lbs

300-02068 3/16” 600 0.70 lbs

300-02068-SN 3/16” 600 Snatch Block 0.70 lbs

300-02568 1/4” 685 1.00 lbs

300-03068 1/4” 800 1.40 lbs


300-03568 5/16” 1550 3.10 lbs


300-04068 3/8” 1700 3.50 lbs


300-05068 3/8” 1850 5.10 lbs

Fixed Eye Double Wire Rope Block• Combination of bronze and steel bushings, designed



300-01568-2 3/16” 525 1.00 lbs

300-02068-2 3/16” 600 2.00 lbs

300-02068-2-SN 3/16” 600 Snatch Block 1.50 lbs

300-02568-2 1/4” 685 2.00 lbs

300-03068-2 1/4” 800 2.50 lbs


300-03568-2 5/16” 1550 5.00 lbs


300-04068-2 3/8” 1700 6.40 lbs


300-05068-2 3/8” 1850 9.30 lbs


29

Wire Rope Blocks

Flat Mount Single Wire Rope Block• Combination of bronze and steel bushings,

designed for high load and medium speed applications

• Oiled Bushings for permanent self-lubrication


300-01558 3/16” 525 0.30 lbs

300-02058 3/16” 600 0.50 lbs


300-02558 1/4” 685 2.00 lbs

300-03058 1/4” 800 1.00 lbs


300-03558 5/16” 1550 2.30 lbs


300-04058 3/8” 1700 3.10 lbs


300-05058 3/8” 1850 4.60 lbs

Flat Mount Double Wire Rope Block• Combination of bronze and steel bushings,




300-01558-2 3/16” 525 0.50 lbs

300-02058-2 3/16” 600 1.00 lbs


300-02558-2 1/4” 685 2.00 lbs

300-03058-2 1/4” 800 2.50 lbs


300-03558-2 5/16” 1550 4.00 lbs


300-04058-2 3/8” 1700 5.50 lbs


300-05058-2 3/8” 1850 8.30 lbs

Swivel Eye Single Wire Rope Block• Combination of bronze and steel bushings, designed



300-01548 3/16” 525 0.50 lbs

300-02048 3/16” 600 0.70 lbs


300-02548 1/4” 685 1.00 lbs

300-03048 1/4” 800 1.40 lbs


300-03048-SN-5/16 5/16” 800 Snatch Block 1.40 lbs

300-03548 5/16” 1550 3.10 lbs

300-03548-SN 5/16” 800 Snatch Block 3.10lbs


300-04048 3/8” 1550 3.60 lbs


300-05048 3/8” 1850 5.20 lbs

Swivel Eye Double Wire Rope Block• Oiled Bushings for permanent self-

lubrication


300-01548-2 3/16” 525 1.00 lbs

300-02048-2 3/16” 600 1.50 lbs


300-02548-2 1/4” 685 2.50 lbs

300-03048-2 1/4” 800 2.50 lbs


300-03548-2 5/16” 1550 5.00 lbs


300-04048-2 3/8” 1700 6.30 lbs


300-05048-2 3/8” 1850 9.10 lbs


Wire Rope Blocks

Swivel Hook Single Wire Rope Block• Stainless steel Hook latch• Combination of bronze and steel bushings, designed for

high load and medium speed applications• Oiled Bushings for permanent self-lubrication

Item ID Max Cable Length (in)

WLL (lbs) Style Weight

300-01578-SL 3/16” 525 0.50 lbs

300-02078-SL 3/16” 600 0.70 lbs

300-02078-SN-SL 3/16” 525 Snatch Block 0.70 lbs

300-02578-SL 1/4” 685 1.00 lbs

300-03078-SL 1/4” 800 1.40 lbs


300-03578-SL 5/16” 1550 3.10 lbs



300-04078-SL 3/8” 1700 3.80 lbs


300-05078-SL 3/8” 1850 5.30 lbs


Swivel Hook Double Wire Rope Block• Stainless Steel Hook Latch• Combination of bronze and steel bushings,



Item ID Max Cable Length (in)

WLL (lbs) Style Weight

300-01578-2-SL 3/16” 525 1.00 lbs

300-02078-2-SL 3/16” 600 1.50 lbs

300-02078-2-SN-SL 3/16” 600 Snatch Block 1.50 lbs

300-02578-2-SL 1/4” 685 2.00 lbs

300-03078-2-SL 1/4” 800 2.50 lbs


300-03578-2-SL 5/16” 1550 5.50 lbs


300-04078-2-SL 3/8” 1700 6.50 lbs


300-05078-2-SL 3/8” 1850 9.30 lbs

Snatch Blocks Hook•��Equipped�with�bronze�bushings�and�grease�fitting• Swivel hook & latch connection

Item ID WLL (tons) Sheave Size (in) Wire Rope Size (in) Weight

340-6I-2T3 2 3” 5/16-3/8” 5.10 lbs

340-6I-4T4 4 4.5” 3/8-1/2” 13.25 lbs

340-6I-8T6 8 6” 5/8-3/4” 27.00 lbs

340-6I-8T8 8 8” 5/8-3/4” 36.00 lbs

340-6I-15T10 15 10” 3/4-7/8” 75.00 lbs

340-6I-15T8 15 8” 3/4-7/8” 60.00 lbs

Snatch Blocks Shackle• Screw pin shackles that attach quickly and securely to D-rings�or�boom�end

• Suitable for wire rope


340-6I-SW2T 2 3” 5/16-3/8” 5.05 lbs

340-6I-SW4T 4 4.5” 3/8-1/2” 13.50 lbs

340-6I-SW8T 8 6” 5/8-3/4” 27.40 lbs

Snatch Blocks with Chain• All BA Products Snatch Blocks feature bronze�bushings�with�greased�fittings

• Easy opening side plates open without coming apart

• WARNING: Never Exceed the Working Load Limit.


340-6I-2TSW30 2 3” 5/16-3/8” 8.23 lbs

340-6I-4TSW30 4 4” 3/8-1/2” 18.25 lbs


31

Blocks

Campbell® Single Sheave Wood Shell Block• Round Loose Hook “AF”•��Drop�Forged�Fittings• Galvanized Metal Parts

Item ID Sheave Size (in) Rope Size WLL (lbs) Weight

306-7205336 3” 3/8” 500 1.00lbs

306-7205436 4” 1/2” 1000 2.00 lbs

306-7205536 5” 5/8” 1200 2.50 lbs

306-7205636 6” 3/4” 1800 4.00 lbs

Campbell® Double Sheave Wood Shell Block• Round Loose Hook “AF”•��Drop�Forged�Fittings• Galvanized Metal Parts


306-7206836 3” 3/8” 800 3.00lbs

306-7206936 4” 1/2” 1400 3.00 lbs

306-7207036 5” 5/8” 1800 4.00 lbs

306-7207136 6” 3/4” 2500 6.50 lbs

Beam Clamps•��Reduces�flange�stress�by�distributing�the�load�away�from�the�flange�edge

• For Permanent or Temporary Mounting

Item ID WLL (tons) Flange Width Weight

115-BC-1 1 3-9” 10.13 lbs

115-BC-2 2 3 - 9” 10.13 lbs

115-BC-3 3 3.2-12.5” 21.79 lbs

115-BC-5 5 3.6-12.5” 25.48 lbs

For Pricing: Contact your Sales Rep or email us at [email protected]

Campbell® Triple Sheave Wood Shell Block• Round Loose Hook “AF”•��Drop�Forged�Fittings• Galvanized Metal Parts


306-7208536 4” 1/2” 1800 4.00 lbs

306-7208636 5” 5/8” 2400 5.50lbs

306-7208736 6” 3/4” 3200 9.00 lbs

NoteAll blocks have a common iron bearing and a becket. Shackle or swivel hook, roller bearing, and self-lubricating bearing also available.

CALL US!800 952 7325

Questions?

EMAIL [email protected]


Swaging Tools

ARM® Swaging Tools Multi Cavity• Hand Operated• All models are supplied with go-no go

gauge

Item ID Size Weight

618-HSC-350 1/16-1/8” 2.43 lbs

618-HSC-600 1/16-3/16” 6.00 lbs

ARM® Swaging Tools Bench Style• Multi-compression jaws to swage• Bolts to your work bench and is excellent

for mass production of snares, drowner slides, cabled stakes, snare extension

Item ID Size Weight

618-HSC-600BB 1/16-3/16” 11.02 lbs

Locoloc® Swaging Tools Single Cavity• Has a single compression die for oval

and stop sleeve swaging

Item ID Size Length Weight

621-0-3/32 3/32” 20” 4.20 lbs

621-0-1/8 1/8” 20” 4.20 lbs

621-0-3/16 3/16” 20” 4.20 lbs

621-0-7/32 7/32” 28” 5.00 lbs

621-0-1/4 1/4” 28” 5.81 lbs

621-0-5/16 5/16” 28” 5.00 lbs

Locoloc® Swaging Tools Multi Cavity• Cuts up to 7/32” diameter• This Tool is for Copper and Aluminum

Sleeves Only

Item ID Length (in) Weight

621-1-SC 26” 6.50 lbs

Locoloc® Swaging Tools Bench Style• This Tool is for Copper and Aluminum

Sleeves Only


621-1-BSC 22-1/2” 6.60 lbs

Locoloc® Swaging Tool Gauges• Proper swaging of Locoloc aluminum,

copper and stainless steel sleeves.• Locoloc Sleeve Gauges GA-1P will

measure all oval or stop sleeves used on 1/32”, 3/64”, 1/16”, 3/32”, 1/8”, 5/32”, and 3/16” oval and stop sleeves

Item ID Measures (in) Weight

621-GA-1P 1/32”, 3/64”, 1/16”, 3/32”, 1/8”, 5/32”, & 3/16”

0.13 lbs

621-GA-2P 7/32”, 1/4”, 9/32”, & 5/16” 0.12 lbs

Nicopress® #63 & #64 Swaging Tools• Nicopress® Nos. 63 and 64 Swaging

Tools are multiple sleeve-pressing groove hand tools

• The No. 63V-XPM has three grooves• The No. 64CGMP has four grooves

Item ID Size Weight

323-63V-XPM 1/8”, 5/32”, 3/16” 6.50 lbs

323-64-CGMP 1/16”, 3/32”, 1/8”, 5/32” 6.50 lbs

Nicopress® #51 Swaging Tools• Single sleeve-pressing groove for a

particular size of cable

Item ID Size Weight

323-51-MJ 3/32-7/32” 5.00 lbs

Nicopress® #3 Swaging Tools• Used for No. 18-13-G9 and No. 28-13-

G9 Oval Sleeves for 5/16” cable. Tool length is 33”

Item ID Size Weight

323-3-F6-950 1/4” 13.00 lbs


33

Swaging Tools

Nicopress® #10 & #300 Bench Tools• For cable sizes 1/8” through 5/32”

only, one press is made per splice•��Prices�Do�Not�Include�Heads�Heads�Are�

Sold Seperately

Item ID Model # Weight

323-300 300 19.00 lbs

323-510 510 6.00 lbs

Nicopress® Swaging Tool Heads• Nicopress® Tool heads are exclusively

for Nicopress brand tools

Item ID Size Weight

323-63V-XPMHEAD 1/8-3/16” 2.20 lbs

323-3-F6-950HEAD 1/4” 4.40 lbs

Locoloc® Swaging Tools Hydraulic• A hand swager, exerting 14 tons of pressure• A few strokes of handle bring the dies from wide�open�to�contact�with�the�fitting�to�be�swaged

• The internal valve automatically shifts from the low pressure pump stage to the high pressure compression stage


621-#3-H 24” 15.00 lbs

Locoloc® HC-5010-R Swaging Tool•��Operates�in�confined�spaces�and�

accommodates one hand operation• 6 ton output• HC-5010-R comes with 1 carrying case, a

battery charger, two (2) TBP-80 Lithium Ion Batteries and a carrying strap. One battery can be used while the other is charging.�REPLACEABLE�DIES�-�Sold�Separately


621-HC-5010-R 22” 8.75 lbs

Nicopress® 5606 Swaging Tool• Battery-powered• Jaws rotate 360°•��REPLACEABLE�DIES�-�Sold�Separately

Item ID Size Weight

323-5606 3/64” - 3/8” 17.60 lbs

Locoloc® Swaging Tool Kit• The Kit Includes: (1) 1SC Swaging tool w/

NoGo Gauge (1) Felco C7 Cable Cutter (100) 1/16, 3/32, 1/8, 5/32, 3/16 Swage Sleeves (100) 3/32, 1/8 Swage Stops

• Available with either aluminum or copper fittings

Item ID Material Weight

621-SWKITASL-1SC Aluminum 19.00 lbs

621-SWKITCSL-1SC Copper 32.00 lbs

Cable Alum & Copper SS

Diameter Oval Sleeves Stop Sleeves Oval Sleeves

3/64” 2 1 1

1/16” 2 1 1

3/32” 2 2 1

1/8” 3 2 2

5/32” 3 2 3

3/16” 4 2 4

7/32” 4 2 4

1/4” 4 3 5

9/32” 4 3 -

5/16” 5A/4C 3 -

3/8” - 3 -

All compressions must be gauged to assure maximum holding strength, and it is recommended that all assemblies should be proof tested�

*Only applies to Locoloc® Swaging Tools

NUMBER OF COMPRESSIONS


Swaging Tools

Locoloc® Dies for HC-3010, HC-5010• Heat treated steel• Each die includes top & bottom (die set)

and gauge

Item ID Size Weight

621-DI2-4 1/8” 0.22 lbs

621-DI2-6 3/16” 0.21 lbs

621-DI2-8 1/4” 0.19 lbs

Bolt-Chain Cutters Import• Jaws made of drop forged high-grade

alloy tool steel• Heat-treated, precision cutting edges

Item ID Capacity (in) Length (in) Jaw Type Weight

205-BOLTCUTTER18 5/16” 18” Center Cut 4.41 lbs




Felco® Wire Rope Cutters• Swiss made, these cable cutters are

recognized throughout the world for their precision manufacture and cutting capabilities

• Made from the highest quality case hardened tool steel, Felco’s proprietary tempering process ensures the hardest and longest lasting cutting blade surfaces

•��Plastic�coated�handles�provide�a�firm�comfortable grip

• All cutters are tested before leaving the factory

Item ID Length (in) Max Cut (in) Weight

746-C7 8” 3/16” 0.63 lbs

746-C9 13” 1/4” 1.50 lbs

746-C12 19” 3/8” 3.00 lbs

746-C16 23” 5/8” 5.00 lbs

746-C112 29” 1/2” 8.25 lbs

C7

C9

C12 & C16

C112

ARM® Wire Rope Cutters• Used for cutting 1/16 to 5/8 inch cable


618-RC-8 3/16” 1.00lbs

618-RC-450 17-3/4” 4.00lbs

618-RC-800 31-1/2” 8.70lbs

RC-8

RC-450

RC-800

Nicopress® 6 Series Dies Copper•��Specifically�engineered�and�designed�to�

be used with Nicopress Copper Sleeves•��Nicopress�6�Series�Dies�come�with�top�

and bottom die (die set) and gauge

Item ID Weight

323-6-OVAL-B4 0.50 lbs

323-6-OVAL-C 1/16” 0.50 lbs

323-6-OVAL-M 1/8” 0.50 lbs

323-6-OVAL-X 3/16” 0.50 lbs

323-6-OVAL-F6 1/4” 0.50 lbs

Nicopress® 12 Series Dies Copper•��Specifically�engineered�and�designed�to�

be used with Nicopress Copper Sleeves•��Nicopress�12�Series�Dies�come�with�top�

and bottom die (die set) and gauge

Item ID Size Weight

323-12-OVAL-X 3/16” 0.50 lbs

323-12-OVAL-F6 1/4” 0.50 lbs

323-12-OVAL-G9 5/16” 0.50 lbs

323-12-OVAL-H5 3/8” 0.50 lbs

323-12-OVAL-K8 1/2” 0.50 lbs


35

Tie Down Equipment

2” Ratchet Straps w Flat Hooks• Standard webbing• Flat hooks on each end

Item ID Web Width (in) Length (ft) WLL (lbs) Weight

200-TDRA2X27/10000F 2” 27’ 3335 5.80 lbs

1” Ratchet Straps w Wire Hooks• Standard webbing• Wire hook on each end


200-TDRA1X016/1000W 1” 16’ 1000 1.56 lbs

2” Ratchet Straps w Wire Hooks• Standard webbing• Wire hook on each end


200-TDRA2X27/10000W 2” 27’ 3335 6.08 lbs

Lever Load Binders•��Powder�painted�finish

Item ID Size WLL (lbs) Take Up (in) Weight

200-LBLEVER250/312 1/4-5/16” 2600 3” 3.80 lbs

200-LBLEVER312/375 5/16-3/8” 5400 4.25” 7.02 lbs

200-LBLEVER375/500 3/8-1/2” 9200 4” 12.50 lbs

G70 Grab Grab Binder Chains • High quality import grade 70 chain and hooks• Assembled chain with (1) grab hook on each

end

Item ID Chain Size WLL (lbs) Base Length (ft)

200-BCG70GG312XXX 5/16” 4700 6’

200-BCG70GG375XXX 3/8” 6600 6’

G70 Slip Grab Binder Chains • High quality import grade 70 chain and hooks• Assembled chain with (1) slip hook and (1) grab

hook• Slip hook includes latch

Item ID Chain Size WLL (lbs) Base Length (ft)

200-BCG70SG375XXX 3/8” 6600 6’

200-BCG70SG312XXX 5/16” 4700 6’

Ratchet Load Binders•��Powder�painted�finish

Item ID Size WLL (lbs) Take Up (in) Weight

200-LBRATCHET312/375 5/16-3/8” 6600 8” 10.00 lbs

200-LBRATCHET375/500 3/8-1/2” 9200 8” 12.90 lbs

200-LBRATCHET500/625 1/2-5/8” 13,000 8” 14.55 lbs


TIE DOWN EQUIPMENT

Never exceed the Working Load Limit. Do not operate the binder while you or anyone else is on the load. When applying the binder, always position the load binder so the handle is tightened in a downward manner.


3-Strand Rope

Nylon 3-Strand Rope • 3-Strand White Nylon Rope is one of the strongest�synthetic�fiber�ropes,�offering�superior�elasticity and excellent abrasion resistance

Item ID Size Color MBS (lbs) Available Put ups

166-3S0250WH-XXXX 1/4” White 1650 100, 600, 1200

166-3S0375WH-XXXX 3/8” White 3700 100, 600, 1200

166-3S0500WH-XXXX 1/2” White 6400 100, 600, 1200

166-3S0625WH-XXXX 5/8” White 10,400 100, 600, 1200

166-3S0750WH-XXXX 3/4” White 14,200 100, 600

166-3S1000WH-XXXX 1” White 25,000 100, 600

Poly Dac 3-Strand Rope • Perfect choice to use in combination with 5/8”

rope grab


168-3S0500WH-XXXX 1/2” White 3,780 600, 1200

168-3S0625WH-XXXX 5/8” White 7200 600, 1200

168-3S0750WH-XXXX 3/4” White 7,650 600, 1200

168-3S0250WH-XXXX 1/4” White 1,300 600, 1200

168-3S0375WH-XXXX 3/8” White 2,881 600, 1200

168-3S1000WH-XXXX 1” White 17,000 600

Never exceed the Working Load Limit. Attachments must have at least the same working load limit as the rope used. Keep out from under a raised load. Destroy, rather than discard retired rope. Inspect rope frequently and store properly. Avoid overheating, shock loads, chemicals, rust and abrasion.

Avoid abrasion and unnecessary wear. Outer fibers as well as inner contribute to a rope’s strength. When outer fibers are worn by chafing or dragging, rough or gritty surfaces, the rope worn will become weakened.

Fiber Type Nylon Poly�Dac Manila

Strength Excellent Good Poor

Wet vs. Dry Strength 85% 100% 115%

Shock Load Ability Excellent Good Poor

Water Absorption 6% 0% 100%

Melting Point 480 °F 305 °F N/A

Abrasion Resistance Good Good Good

Resistance to Sun Good Good Good

Resistance to Rot Excellent Excellent Poor

Resistance to Acid Poor Good Poor

Flexing Endurance Excellent Good Poor

Storage Requirements Wet or Dry Wet or Dry Dry Only

Rope Fiber Information

Manila 3-Strand Rope • Premium grade with 36 min becker value.


172-3S0250-XXXX 1/4” Natural 540 100, 600, 1200

172-3S0312-XXXX 5/16” Natural 900 600, 1200

172-3S0375-XXXX 3/8” Natural 1,215 100, 600, 1200

172-3S0500-XXXX 1/2” Natural 2,385 100, 600, 1200

172-3S0625-XXXX 5/8” Natural 3,960 100, 600, 1200

172-3S0750-XXXX 3/4” Natural 4,860 100, 600, 1200

172-3S0875-XXXX 7/8” Natural 6,930 600, 1200

172-3S1000-XXXX 1” Natural 8,100 100, 600, 1200

IMPORTANT – READ WARNINGS BEFORE USING All products are sold with the understanding that the purchaser is familiar with their safe use and correct application. Peak Trading Corporation assumes no

responsibility for the use or misapplication of any product it sells. Responsibility for design and use decisions rests with the user.

SAFETY WARNINGS RAISED LOADKeep out from under a raised load. Take notice of the recommendation from the National Safety Council Accident Prevention manual concerning all lifting operations:

All employees working with cranes or hoists or assisting in hooking or arranging a load should be in-structed to keep out from under the load. From a safety standpoint, one factor is paramount: Conduct all lifting operations in such a manner, that if there were an equip-ment failure, no personnel would be injured. This means keep out from under a raised load and keep out of the line of force of any load.

REGULAR INSPECTION Inspect products regularly for visible damage, cracks, wear, elongation, rust, etc. Protect all products from corrosion. No product can keep operating at its rated capacity indefi-nitely. Periodic inspections help determine when to replace a product and reduce rigging hazards. Keep inspection records to help pinpoint problems and to ensure periodic inspection intervals.

Frequency of inspection will depend on environmental conditions, application, storage of product prior to use, frequency of use, whether or not life, limb, or valuable property are at risk, etc. When in doubt, inspect products prior to each use. Carefully check each item for wear, de-formation, cracks, or elongation — a sure sign of imminent failure. Immediately withdraw such items from service. Rust damage is another potential hazard. When in doubt about the extent of corrosion or other damage, withdraw the items from service.

Destroy, rather than discard, items that have been judged defective. They might be used by someone not aware of the hazard of the defect.

IMPORTANT WARNINGSRemember that any product will break if abused, misused or overused. Therefore:• Never exceed the working load limit.• Match components properly.• Keep out from under a raised load.• Avoid shock loads.• Inspect products regularly.

WORKING LOAD LIMITSNever exceed the working load limit (WLL), safe working load (SWL), or rated capacity. The working load limit is the maximum load which should never be applied to the product, even when the product is new and when the load is uniformly applied - straight line pull only. Avoid side loading. All catalog ratings are based upon usual environmental conditions, and consideration must be given to unusual conditions such as high or low temperatures, chemical solutions or vapors, prolonged immersion in salt water, etc.. Such conditions or high-risk applications may necessitate reducing the working load capacity. Working load limit will not apply if product has been welded or otherwise modified.

MATCHING COMPONENTSComponents must match. Make certain that components such as hooks, links, shackles, etc., used with wire rope (or chain or cordage), are of suitable material and strength to provide adequate safety protection. Attachments must be properly installed and must have a working load limit at least equal to the products with which they are used. Remember that any chain is only as strong as its weakest link.

SHOCK LOADSAvoid impacting, jerking, or swinging of load – working load limit will not apply. A shock load is generally significantly greater than the static load. Avoid shock loads.

Wire Rope

Chain

• Stainless Steel • Galvanized • Bright • Aircraft Cable

• IWRC• Fiber Core• Cable Laid • Crane Cables

• PVC Coated • Strand• Specialty• Roll-Off Cables

• G30 Proof Coil • G43 High-Test• G70 Transport• G80 Alloy• G100 Alloy

• Jack• Binder• STAC• Stainless Steel• BBB

• Plastic• Aluminum• Tire• Tow• Weldless

• Cable Fittings • Stainless Steel• Gripples • Turnbuckles• Adjustable Clamps

• Strandvises• Eyebolts• Rapid Links• Beam Clamps • Hooks

• Shackles• Snaps• Swivels• Wire Rope Clips • Sheaves

• Bull Pins• Swage Tools• Erection Wrenches • Klien Pliers• Load Binders• Electric Hoists

• Haven Grips• Tool Bags• Bottle Jacks• Bolt Cutters• Come-A-Longs• Winches

• Griphoist• Wire Mesh Grip• Cable Cutters• Lineman Wrenches• Cable Pullers• Load Cells

• Polyester• Nylon• Dacron (poly)• Polypro• Sisal• Sash Cord

• Bungee Cord• Truck Rope• Cargo Nets• Safety Nets• Solid Braid• Double Braid

• Manila• 3-Strand• Theatrical Rope• Arborist Ropes• Dynamic Climbing• 12-Strand

• Conduit Assemblies• Miniature Assemblies

• Coated Cable Assemblies• Custom Assemblies

• Light Safety Cables• Security Cables• Lanyards• Cable Ladders

Hardware

Cable Assemblies

Rope Hoists and Tools

• Carabiners• Figure Eights• Ascenders• Descenders

• Harness Gear• Daisy Chains• Retrieval Winch

• Swivels• Pulleys• Gloves• Tripods

• Wire Rope Slings• Chain Slings• Nylon Slings

• Roundslings• Winches• Winch Bars

• Winch Straps• Rubber Straps• Ratchet Straps

• Full Body Harnesses• Ladder Systems• Vertical Lifelines• Anchor Systems

• Safety Glasses• Hardhats• Lanyards• Horizontal Lifelines

• Retractable Lifelines• Rope Grabs• Shock Absorbers

• Crane Blocks• Manilla Rope Blocks

• Sheaves• Swivels• Snatch Blocks

• Overhaul Balls• Spreader Bars• Block and Falls

Rope/Rescue Equipment

Lifting Slings and Tie Downs

Safety

Blocks and Accessories

Manufacturers We Carry (partial list)Block DivisionCaldwellCampbellChicago HardwareCMICoffingColumbus McKinnon

CrosbyDBI/SALAFelcoGrippleGriplockGunnebo JohnsonJET

Kinedyne Klein ToolsLift-AllLiftexOmega PacificPetzlNew England Ropes

NicopressSamson RopeSterling RopeSuncorWirecoYale Rope

SHOP ONLINE at www.peaktrading.com

Register! To see pricing instantly!

● In-stock products ordered by 3 pm ship same day! ● Same-day quotes from your dedicated Sales Rep!

& *Registration will take 1 day or less

PEAK TRADING CORPA direct importer and domestic wholesale distributor1 Tomsons Road #100, Saugerties, NY 12477

800.952.7325/845.338.1325 F: 845.338.1372 E: [email protected]

1997 CELEBRATING 20 YEARS 2017

Peak Trading Corp 1 Tomsons Rd, #100Saugerties, NY 12477

Documents

AIRCRAFT CABLE • WIRE ROPE •RIGGING … cable • wire rope •rigging hardware chain •lifting slings •tie-downs