View
17
Download
3
Category
Tags:
Preview:
DESCRIPTION
computador de flujo
Citation preview
1NUFLO Scanner 2000 microEFM SolutionsA convenient low-power compact flow computer
2 API 21.1 compliant
Non-volatile memory
Packaging
Easy-to-read LCD
User friendly keypad operations
Multiple enclosure and mounting options
Communications
Two RS-485 communication ports
USB local communications option
Modbus protocol (RTU and ENRON)
Two wire communication
Calibration
1 to 12 calibration points available for all inputs
Inputs/Outputs
Accurate, stable and repeatable input readings using an integral MVT
Base unit: Process temperature input Turbine meter input Digital output
(volumetric pulse output or alarm)
With expansion board: Second turbine meter input Pulse input Two analog inputs Analog output
FeaturesPower
Low-power operation
Fully autonomous operation via lithium battery pack (typically 1-year) for stand-alone installations
When device is externally powered a lithium battery pack provides backup power supply and data is protected for up to 10 years
Performance
Industry standard calculation AGA-3 AGA-7 ISO 5167 ASME MFC-12M
(averaging pitot tube) AGA-8 (detail and gross) IF-97 (steam) API-2540 (liquid)
Field recognized DP Cone meter algorithm
Archives up to 16 user-selectable parameters
Generous log capacity: 768 daily records 2304 interval records
(6392 with expansion board option) 1152 event/alarm records
Fast data transfer Full archive download in approximately
three minutes with main board only Six minutes with expansion board
option
The convenienceMaking Measurement
Easy... -To Afford -To Operate -To Integrate -To Optimize
Camerons NUFLOTM Scanner 2000
microEFM packs the gas, liquid and
ancillary measurement capabilities,
traditionally found in large flow
computers, into a compact, low-
power instrument that operates
economically as a stand-alone
chart recorder replacement, flow
computer, data logger and totalizer
making it the ideal product for test
separator measurement.
By gathering all liquid and gas
flow rates, wellhead pressure and
temperature, casing pressure,
separator pressure and temperature
into a single common platform, all
the data is immediately available
to view, log or trend via industry
standard well testing software
packages. A reduction between 15 to
20% of total transmitters and vastly
simplified wiring makes rig up of
portable test separators very quick
and simple. All the transmitters are
on a single RS485 loop.
of a low-power, compact flow computer
Simplicity and ease of use are integral to the design of the Scanner 2000. Basic parameters can be configured from a keypad inside the enclosure and all other parameters are easily configured using a PC or laptop and the ModWorX Pro software which is provided free with every Scanner 2000.
The versatility
Totalizer/TFM Mount for Allocation Measurement
Turbine Meter Mount
This scaled-to-fit ATEX and GOST certified model complements
any turbine meter installation in the world including sites
fitted with Camerons own NUFLO and BARTON turbine
meters. Cameron is a dominant manufacturer of turbine
meters to the global oil and gas industry.
Explosion-proof or weatherproof enclosure
Direct mount or pole mount
Monitors and logs up to one or two turbine inputs
with expansion board option
Data Logging
Delivers casing and tubing pressures and
wellhead temperatures
Logs daily and interval records of to 16 user-selectable
parameters and stores the data in nonvolatile memory
for up to 10 years
Explosion-proof or weatherproof enclosures
Weatherproof/General Service
Designed specifically for remote locations in harsh climates
the weatherproof package delivers full value to general
service areas.
Auxiliary solar power option
USB and serial interface options
Simultaneous Gas/Liquid/Steam Measurement
Inexpensive expansion board option delivers:
Increased device memory
Second turbine meter input
Pulse input
Analog output
Two analog inputs
3
of a low-power, compact flow computer of a common platform
Totalizer/TFM Mount for Compensated Measurement
4The benefits of making it easy
to afford to operate to optimize to integrate
Compares to the cost of a mechanical chart recorder
Eliminates the cost of charts, chart integration and manual calculations
Free interface software(ModWorX Pro)
Operates for up to12 months on aninternal battery
Often less expensive to purchase entire unit than it is to repair other popular brands
Little to no training costs
Dramatically reduced installation costs
Easy to Read LCD and Easy to Use Keypad
Keypad Functions: Configure basic parameters View daily logs Save flow totals
Easy to Use ModWorX Pro Software:
Easy to Manage Data: 768 daily records, 2304 interval
records, 1152 event/alarm records 1 to 12 calibration points Full data transfer in three minutes
Transitioning Solutions(from mechanical to electronic measurement) Low producing wells Unconventional gas Coalbed methane
Shale Air measurement Well testing/Three-phase separator measurement Chemical fracturing Rotary meter measurement LACT measurement
Expanding or ModernizingExisting Measurement Systems Check meter Custody transfer/measurement
Canada approval Gas storage Three-phase separator Salt water disposal
Application Solutions Single flow run Multiflow run Steam Compensated liquid
Single Source forMeters and Electronics:Easy Product Packages Scanner 2000 and
NUFLO Orifice Meters Scanner 2000 and
NUFLO DP Cone Meters
Scanner 2000 and NUFLO Turbine Meters
Scanner 2000 and BARTON Turbine Meters
5to afford to operate to optimize to integrate
Input/Output Ready and Able
Differential pressure Orifice Cone Pitot
Frequency Turbine Ultrasonic Positive displacement Vortex
Capacity (Base Unit) Temperature input Turbine input Digital output
Capacity (additional with expansion) Second turbine input Pulse input Two analog inputs Analog output
Communications Ready Modem Cell Radio Satellite
Custom Communications Accessory Boxes Power, communications and enclosure (CSA) General purpose or hazardous areas
Field and Install ReadyThe Scanner 2000 fits into any field application from a single unit install, to an independent mid-size operation, to large and existing SCADA system alongside field devices from almost any other manufacturer.
Single or limited unit application
Independent mid-sized network application
Existing SCADA network application
Ethernet Bluetooth USB or Serial
Modbus protocol and RS-485 communication ports (2) allow for remote communication to host systems
6z
The strength of
The ModWorX Pro software interface offers easy access to the most commonly used functions from one main display screen.
a scalable system
Dedicated button for quick and easy downloads
Documentation for quick reference
ModWorX Pro Interface SoftwareA key to the Scanner 2000s flexibility and adaptability is the ModWorX Pro Interface Software. ModWorX, which is provided free with every Scanner 2000, is easy to use and can be adapted to any Scanner 2000 configuration. A single main display screen provides access to the most commonly used functions and task-based menus guide operators through each process:
Unit configuration
Multipoint field calibration
Real-time data polling
Data downloads
Historical archiving
Reporting
Data trending
Systems, SCADA and the Scanner 2000 With measurement and flow computing there is an application, data, transmission and you. Cameron has developed a quick and simple way for you to get your data whether its right outside the door of your truck or in a remote field; whether you are accessing a stand alone unit or managing with a large and complex automation project.
SCADA Networkand Host Software
SCADAWorX
AES Solutionand
SCADA Host Drivers
Application
Scanner 2000
Orifice
DP Cone
Pitot
Turbine
Ultrasonic
Positive Displacement
Vortex
Web Interface
Radio
Modem
Cellular
GPRS
Satellite
Bluetooth
ModWorX
User
7z
The flexibility of
SCADA solution options
AnyHMI
AnyDatabase
Client Client
Server
Quorum PGAS
Flow-Cal FlowAutomation
ABB
Measurement DataManagement
ScadaWorX Host SoftwareScadaWorX is a complete SCADA software solution designed specifically for the smaller operator who sees value in owning and operating a system that can grow alongside their business. Visually, ScadaWorX is based on the simplicity of the ModWorX interface software, and so it is easy to understand and operate. The ScadaWorX tool is scaled and priced specifically for the market and includes a 12-month maintenance and support contract with no hidden fees. Functionally, ScadaWorX delivers daily and monthly data, trends, alarms and reporting as well as supports multi-communications devices.
Integrating the Scanner 2000 into existing SCADA SystemsCameron actively pursues technical and strategic relationships with key solutions providers to ensure that the Scanner 2000 operates transparently within existing measurement and SCADA systems. Camerons partnership with AutoSol enables seamless communications to EFM validation software; HMI and SCADA host software and back-end data interfaces.
Developing drivers for specific solutions has proven to be quick and economical and current drivers exist for CygNet, WonderWare, Telvent and Fekete with more being considered and added as required by our clients and applications.
82012 Cameron. All Rights Reserved. | CALDON, LEFM and BARTON are registered trademarks of Cameron. NUFLO, Scanner, ModWorX, and ScadaWorX are trademarks of Cameron. Others are trademarks of their respective corporations | SWP 2M 04/13 AD00585M
USA CANADA UK CHINA UAE ALGERIA MALAYSIA INDIA RUSSIA
HSSE Policy StatementAt Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed.
HEAL
TH S
AFE
TY S
EC
URITY
AND ENVIRONMENTA
L EXCELLENCE
CAMERON
NORTH AND SOUTH AMERICA
14450 JFK Blvd.
Houston, TX 77032
USA
Tel 281 582 9500
ms-us@c-a-m.com
MIDDLE EAST
Level 9, Al Jazira Club Tower A
P.O. Box 47280, Muroor Road
Abu Dhabi
United Arab Emirates
Tel 971 2 596 8400
ms-uk@c-a-m.com
EUROPE, AFRICA, CASPIAN
AND RUSSIA
3 Steyning Way
Southern Cross Trading Estate
Bognor Regis
West Sussex PO22 9TT
England, UK
Tel 44 1243 826741
ms-uk@c-a-m.com
ASIA PACIFIC
Suite 16.02 Menara AmFirst
No. 1 Jalan 19/3
46300 Petaling Jaya
Selangor Darul Ehsan
Malaysia
Tel 603 7954 0145
ms-kl@c-a-m.com
Visit our website
www.c-a-m.com/measurement
Recommended