1

NUFLO Scanner 2000 microEFM SolutionsA convenient low-power compact flow computer

2

• API 21.1 compliant

• Non-volatile memory

Packaging

• Easy-to-read LCD

• User friendly keypad operations

• Multiple enclosure and mounting options

Communications

• Two RS-485 communication ports

• USB local communications option

• Modbus® protocol (RTU and ENRON)

• Two wire communication

Calibration

• 1 to 12 calibration points available for all inputs

Inputs/Outputs

• Accurate, stable and repeatable input readings using an integral MVT

• Base unit: • Process temperature input • Turbine meter input • Digital output

(volumetric pulse output or alarm)

• With expansion board: • Second turbine meter input • Pulse input • Two analog inputs • Analog output

FeaturesPower

• Low-power operation

• Fully autonomous operation via lithium battery pack (typically 1-year) for stand-alone installations

• When device is externally powered a lithium battery pack provides backup power supply and data is protected for up to 10 years

Performance

• Industry standard calculation • AGA-3 • AGA-7 • ISO 5167 • ASME MFC-12M

(averaging pitot tube) • AGA-8 (detail and gross) • IF-97 (steam) • API-2540 (liquid)

• Field recognized DP Cone meter algorithm

• Archives up to 16 user-selectable parameters

• Generous log capacity: • 768 daily records • 2304 interval records

(6392 with expansion board option) • 1152 event/alarm records

• Fast data transfer • Full archive download in approximately

three minutes with main board only • Six minutes with expansion board

option

The convenienceMaking Measurement

Easy... -To Afford -To Operate -To Integrate -To Optimize

Cameron’s NUFLOTM Scanner® 2000

microEFM packs the gas, liquid and

ancillary measurement capabilities,

traditionally found in large flow

computers, into a compact, low-

power instrument that operates

economically as a stand-alone

chart recorder replacement, flow

computer, data logger and totalizer

making it the ideal product for test

separator measurement.

By gathering all liquid and gas

flow rates, wellhead pressure and

temperature, casing pressure,

separator pressure and temperature

into a single common platform, all

the data is immediately available

to view, log or trend via industry

standard well testing software

packages. A reduction between 15 to

20% of total transmitters and vastly

simplified wiring makes rig up of

portable test separators very quick

and simple. All the transmitters are

on a single RS485 loop.

of a low-power, compact flow computer

Simplicity and ease of use are integral to the design of the Scanner 2000. Basic parameters can be configured from a keypad inside the enclosure and all other parameters are easily configured using a PC or laptop and the ModWorX™ Pro software – which is provided free with every Scanner 2000.

The versatility

Totalizer/TFM Mount for Allocation Measurement

Turbine Meter Mount

This scaled-to-fit ATEX and GOST certified model complements

any turbine meter installation in the world – including sites

fitted with Cameron’s own NUFLO and BARTON® turbine

meters. Cameron is a dominant manufacturer of turbine

meters to the global oil and gas industry.

• Explosion-proof or weatherproof enclosure

• Direct mount or pole mount

• Monitors and logs up to one or two turbine inputs

with expansion board option

Data Logging

Delivers casing and tubing pressures and

wellhead temperatures

• Logs daily and interval records of to 16 user-selectable

parameters and stores the data in nonvolatile memory

for up to 10 years

• Explosion-proof or weatherproof enclosures

Weatherproof/General Service

Designed specifically for remote locations in harsh climates

the weatherproof package delivers full value to general

service areas.

• Auxiliary solar power option

• USB and serial interface options

Simultaneous Gas/Liquid/Steam Measurement

Inexpensive expansion board option delivers:

• Increased device memory

• Second turbine meter input

• Pulse input

• Analog output

• Two analog inputs

3

of a low-power, compact flow computer of a common platform

Totalizer/TFM Mount for Compensated Measurement

4

The benefits of making it easy

to afford to operate to optimize to integrate

Compares to the cost of a mechanical chart recorder

Eliminates the cost of charts, chart integration and manual calculations

Free interface software(ModWorX Pro)

Operates for up to12 months on aninternal battery

Often less expensive to purchase entire unit than it is to repair other popular brands

Little to no training costs

Dramatically reduced installation costs

Easy to Read LCD and Easy to Use Keypad

Keypad Functions:• Configure basic parameters• View daily logs• Save flow totals

Easy to Use ModWorX Pro Software:

Easy to Manage Data:• 768 daily records, 2304 interval

records, 1152 event/alarm records• 1 to 12 calibration points• Full data transfer in three minutes

Transitioning Solutions(from mechanical to electronic measurement)• Low producing wells• Unconventional gas• Coalbed methane

° Shale• Air measurement• Well testing/Three-phase separator measurement• Chemical fracturing• Rotary meter measurement• LACT measurement

Expanding or ModernizingExisting Measurement Systems• Check meter• Custody transfer/measurement

Canada approval• Gas storage• Three-phase separator• Salt water disposal

Application Solutions• Single flow run• Multiflow run• Steam• Compensated liquid

Single Source forMeters and Electronics:Easy Product Packages• Scanner 2000 and

NUFLO Orifice Meters• Scanner 2000 and

NUFLO DP Cone Meters

• Scanner 2000 and NUFLO Turbine Meters

• Scanner 2000 and BARTON Turbine Meters

5

to afford to operate to optimize to integrate

Input/Output Ready and Able

Differential pressure• Orifice • Cone • Pitot

Frequency• Turbine • Ultrasonic • Positive displacement • Vortex

Capacity (Base Unit)• Temperature input • Turbine input • Digital output

Capacity (additional with expansion)• Second turbine input • Pulse input • Two analog inputs • Analog output

Communications Ready• Modem• Cell• Radio• Satellite

Custom Communications Accessory Boxes• Power, communications and enclosure (CSA)• General purpose or hazardous areas

Field and Install ReadyThe Scanner 2000 fits into any field application from a single unit install, to an independent mid-size operation, to large and existing SCADA system alongside field devices from almost any other manufacturer.

Single or limited unit application

Independent mid-sized network application

Existing SCADA network application

• Ethernet• Bluetooth• USB or Serial

• Modbus protocol and RS-485 communication ports (2) allow for remote communication to host systems

6

z

The strength of

The ModWorX Pro software interface offers easy access to the most commonly used functions from one main display screen.

a scalable system

Dedicated button for quick and easy downloads

Documentation for quick reference

ModWorX Pro Interface SoftwareA key to the Scanner 2000’s flexibility and adaptability is the ModWorX Pro Interface Software. ModWorX, which is provided free with every Scanner 2000, is easy to use and can be adapted to any Scanner 2000 configuration. A single main display screen provides access to the most commonly used functions and task-based menus guide operators through each process:

• Unit configuration

• Multipoint field calibration

• Real-time data polling

• Data downloads

• Historical archiving

• Reporting

• Data trending

Systems, SCADA and the Scanner 2000 With measurement and flow computing there is an application, data, transmission and you. Cameron has developed a quick and simple way for you to get your data – whether its right outside the door of your truck or in a remote field; whether you are accessing a stand alone unit or managing with a large and complex automation project.

SCADA Networkand Host Software

SCADAWorX

AES Solutionand

SCADA Host Drivers

Application

Scanner 2000

Orifice

DP Cone

Pitot

Turbine

Ultrasonic

Positive Displacement

Vortex

Web Interface

Radio

Modem

Cellular

GPRS

Satellite

Bluetooth

ModWorX

User

7

z

The flexibility of

SCADA solution options

AnyHMI

AnyDatabase

Client Client

Server

Quorum PGAS

Flow-Cal FlowAutomation

ABB

Measurement DataManagement

ScadaWorX Host SoftwareScadaWorX is a complete SCADA software solution designed specifically for the smaller operator who sees value in owning and operating a system that can grow alongside their business. Visually, ScadaWorX is based on the simplicity of the ModWorX interface software, and so it is easy to understand and operate. The ScadaWorX tool is scaled and priced specifically for the market and includes a 12-month maintenance and support contract with no hidden fees. Functionally, ScadaWorX delivers daily and monthly data, trends, alarms and reporting as well as supports multi-communications devices.

Integrating the Scanner 2000 into existing SCADA SystemsCameron actively pursues technical and strategic relationships with key solutions providers to ensure that the Scanner 2000 operates transparently within existing measurement and SCADA systems. Cameron’s partnership with AutoSol enables seamless communications to EFM validation software; HMI and SCADA host software and back-end data interfaces.

Developing drivers for specific solutions has proven to be quick and economical and current drivers exist for CygNet®, WonderWare®, Telvent® and Fekete® with more being considered and added as required by our clients and applications.

8

©2012 Cameron. All Rights Reserved. | CALDON, LEFM and BARTON are registered trademarks of Cameron. NUFLO, Scanner, ModWorX, and ScadaWorX are trademarks of Cameron. Others are trademarks of their respective corporations | SWP 2M 04/13 AD00585M

USA • CANADA • UK • CHINA • UAE • ALGERIA • MALAYSIA • INDIA • RUSSIA

HSSE Policy StatementAt Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed.

HEALT

H S

AFE

TY S

ECURITY AND ENVIRONM

ENTAL EX

CELLENCE

CAMERON

NORTH AND SOUTH AMERICA

14450 JFK Blvd.

Houston, TX 77032

USA

Tel 281 582 9500

ms-us@c-a-m.com

MIDDLE EAST

Level 9, Al Jazira Club Tower A

P.O. Box 47280, Muroor Road

Abu Dhabi

United Arab Emirates

Tel 971 2 596 8400

ms-uk@c-a-m.com

EUROPE, AFRICA, CASPIAN

AND RUSSIA

3 Steyning Way

Southern Cross Trading Estate

Bognor Regis

West Sussex PO22 9TT

England, UK

Tel 44 1243 826741

ms-uk@c-a-m.com

ASIA PACIFIC

Suite 16.02 Menara AmFirst

No. 1 Jalan 19/3

46300 Petaling Jaya

Selangor Darul Ehsan

Malaysia

Tel 603 7954 0145

ms-kl@c-a-m.com

Visit our website

www.c-a-m.com/measurement