View
1
Download
0
Category
Preview:
Citation preview
www.domino-printing.com
The V230i thermal transfer printer
V230i/0314 We reserve the right to change the design or specification of our products without notice. Some of the information contained in this brochure is general in nature and customers should check that it is applicable to their individual circumstances.
V230i (32mm) V230i (53mm)Printer Specification Printing Modes Left hand / Right hand Print resolution Maximum print area (IM) Maximum print area (CM) Print speed (max) (IM) Speed range (CM) Print repeat rate (max) Ribbon drive technology Max ribbon length Standard Ribbon widths
Intermittent and Continuous in the same printer Both options available (convertible with no extra parts in 15 minutes) 300 dpi 32 mm x 55 mm 53 mm x 55 mm 32 mm x 500 mm 53 mm x 500 mm 400 mm/s* 10 mm/s – 750 mm/s* 6 prints / s (with a 10mm long print)* i-Tech Ribbon Drive with unique Dancing Arm tension control 770m (up to 1925m effective length with Economy Mode) 34 mm, 22 mm 55 mm, 34 mm
Ribbon save modes* Economy Mode Variable in 1% increments up to 60% Retraction Mode Less than 1 mm gap between prints Column Mode Yes Stop mid print Yes
Print features Date code format Offsets Shift codes Serial number generation Fonts Dynamic bar codes 2D codes Database linking Logos / bitmapsIn-field text highlighting
Yes Yes Yes Yes Most true type fonts Yes Yes Yes YesYes – via QuickDesign Lite
Graphical User Interface QuickStep, full colour Interface Intuitive navigation via, large, easy to read buttons and Icons. WYSIWYG print preview. Multilanguage support.
Controller options
No dedicated controller required. Options: • Domino TouchPanel (10.4”) • Domino TouchPad (5.7”) • PC based interface (via Ethernet cable or network)
Connectivity Ethernet / USB x 2 / mini USB (service)
Inputs Print Go, Encoder
Outputs Error, Ready, Ribbon Low, Spare (sofware configurable volt free contacts)
Special features Master slave, macros, password, fastmode
Label creation Onboard and via QuickDesign Lite (PC application included)
Electrical requirements 90v – 264v AC 50/60Hz, OR 24v DC (+/- 2%) at 5A (if direct)
Dimensions (W) 218mm x (H) 160mm x (D) 172mm (W) 218mm x (H) 160mm x (D) 193mm
Weight 6.9kg 7.5kg
TouchPanel Specification Type I.P. Protection Connectivity Electrical requirements Dimensions Weight
10.4 inch, full colour touchscreen (800x600 resolution) VESA mountable with optional brackets Certified to IP65 2 x USB, Ethernet 100/240 VAC, 50/60 Hz W 307mm x H 232mm x D 75mm 2.8kg
TouchPad Specification Type Connectivity Dimensions Weight
5.7 inch, full colour touchscreen (640x480 resolution). Handheld with docking station included. USB, Ethernet, Mini USB (for power / data connection to printer) (W) 173mm x (H) 128mm x (D) 34mm excluding docking station, (W) 181mm x (H) 135mm x (D) 50mm including docking station 0.4kg
PSU Specification Standard:Dimensions / Weight W 67 mm x H 34 mm x D 166 mm / 0.4kg Cable length (PSU to printer) 1.2mOptional Industrial Long Length:Dimensions / Weight W 117 mm x H 217 mm x D 63 mm / 1.0kg Cable length (PSU to printer) 2.8m
Environmental requirements Temperature: 5°C to 40°C. Humidity: 20-80%, non condensing
Exceeding your expectations for performance and value
A quick tour around the V230i
*Note: Capability is dependent upon application and substrate type as well as message length
For flexible films and labels, the V230i easily delivers the performance and coding you expect but without the costs.
QuickStep includes Built in Label Creation capability to design messages line-side at no extra cost
770m ribbon rolls for long production runs, with effective length of up to 1925m when Economy Mode is used.
Connectivity with USB and Ethernet
Continuous and Intermittent Mode functionality in the same printer – suitable for all applications
Ribbon Drive reduces ribbon use by up to 60%
Proven ‘Dancing Arm’ technology ensures no ribbon break-related downtime
10.4” TouchPanel with QuickStep interface - control one or more networked printers; IP65 rated to withstand harsh environments
5.7” Portable TouchPad with QuickStep interface - quick connection via USB allows sharing between printers and safe storage
Use any alternative PC based interface and our QuickStep App to reduce cost and complexity on your production line
A range of user interface options to suit your needs:
Technical Specification:
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DRAWNDATESCALE
DESCRIPTION
MATERIAL
FINISH
MASS (g)
CLEANLINESS
THE MASTER OF THIS DRAWING IS HELD IN THE PLM SYSTEM.
ALWAYS REFER TO PLM FOR THE CORRECT REVISION.
PAPER OR ELECTRONIC COPIES OF THIS DRAWING ARE UNCONTROLLED.
IF THIS DRAWING IS NOT WATERMARKED ITS CONTENTS SHALL NOT BE TRUSTED.
UNLESS OTHERWISE STATED DIMENSIONS IN mm
MACHINED SURFACE FINISH: 1.6µm Ra
MOULDED SURFACE FINSH: COMMERCIAL POLISH
GENERAL TOLERANCES�
0,5 - 3 0,1 >3 - 6 0,1�
>6 - 30 0,2 >30 - 120 0,3�
>120 - 400 0,5 >400 - 1000 0,8�
ANGLES 0.5
197
(53m
m P
RIN
TER
)17
6 (3
2mm
PR
INTE
R)
160
218
THIRD ANGLE
PROJECTION
THIS ASSEMBLY/PART AND ITS COMPONENTS
MUST COMPLY WITH CURRENT RoHS & REACH DIRECTIVES
UNLESS OTHERWISE STATED
GROUP COMPANY
THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE COPIED OR DISCLOSED
WITHOUT THE WRITTEN CONSENT OF DOMINO UK LTD. CAMBRIDGE. ENGLANDASSY, PRINTER, 2 INCH NEW CASSETTE
1:1SHEET
1 OF 1 741511554959 EPT009425 A2DO NOT
SCALE19 Nov 2013 Administrator, 6[.0]APPROVAL IN
PLM DATABASE
REVISIONMODIFICATIONCHANGE NUMBERDATEENGINEER
(R02)
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DRAWNDATESCALE
DESCRIPTION
MATERIAL
FINISH
MASS (g)
CLEANLINESS
THE MASTER OF THIS DRAWING IS HELD IN THE PLM SYSTEM.
ALWAYS REFER TO PLM FOR THE CORRECT REVISION.
PAPER OR ELECTRONIC COPIES OF THIS DRAWING ARE UNCONTROLLED.
IF THIS DRAWING IS NOT WATERMARKED ITS CONTENTS SHALL NOT BE TRUSTED.
UNLESS OTHERWISE STATED DIMENSIONS IN mm
MACHINED SURFACE FINISH: 1.6µm Ra
MOULDED SURFACE FINSH: COMMERCIAL POLISH
GENERAL TOLERANCES�
0,5 - 3 0,1 >3 - 6 0,1�
>6 - 30 0,2 >30 - 120 0,3�
>120 - 400 0,5 >400 - 1000 0,8�
ANGLES 0.5
197
(53m
m P
RIN
TER
)17
6 (3
2mm
PR
INTE
R)
160
218
THIRD ANGLE
PROJECTION
THIS ASSEMBLY/PART AND ITS COMPONENTS
MUST COMPLY WITH CURRENT RoHS & REACH DIRECTIVES
UNLESS OTHERWISE STATED
GROUP COMPANY
THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE COPIED OR DISCLOSED
WITHOUT THE WRITTEN CONSENT OF DOMINO UK LTD. CAMBRIDGE. ENGLANDASSY, PRINTER, 2 INCH NEW CASSETTE
1:1SHEET
1 OF 1 741511554959 EPT009425 A2DO NOT
SCALE19 Nov 2013 Administrator, 6[.0]APPROVAL IN
PLM DATABASE
REVISIONMODIFICATIONCHANGE NUMBERDATEENGINEER
(R02)
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DRAWNDATESCALE
DESCRIPTION
MATERIAL
FINISH
MASS (g)
CLEANLINESS
THE MASTER OF THIS DRAWING IS HELD IN THE PLM SYSTEM.
ALWAYS REFER TO PLM FOR THE CORRECT REVISION.
PAPER OR ELECTRONIC COPIES OF THIS DRAWING ARE UNCONTROLLED.
IF THIS DRAWING IS NOT WATERMARKED ITS CONTENTS SHALL NOT BE TRUSTED.
UNLESS OTHERWISE STATED DIMENSIONS IN mm
MACHINED SURFACE FINISH: 1.6µm Ra
MOULDED SURFACE FINSH: COMMERCIAL POLISH
GENERAL TOLERANCES�
0,5 - 3 0,1 >3 - 6 0,1�
>6 - 30 0,2 >30 - 120 0,3�
>120 - 400 0,5 >400 - 1000 0,8�
ANGLES 0.5
197
(53m
m P
RIN
TER
)17
6 (3
2mm
PR
INTE
R)
160
218
THIRD ANGLE
PROJECTION
THIS ASSEMBLY/PART AND ITS COMPONENTS
MUST COMPLY WITH CURRENT RoHS & REACH DIRECTIVES
UNLESS OTHERWISE STATED
GROUP COMPANY
THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE COPIED OR DISCLOSED
WITHOUT THE WRITTEN CONSENT OF DOMINO UK LTD. CAMBRIDGE. ENGLANDASSY, PRINTER, 2 INCH NEW CASSETTE
1:1SHEET
1 OF 1 741511554959 EPT009425 A2DO NOT
SCALE19 Nov 2013 Administrator, 6[.0]APPROVAL IN
PLM DATABASE
REVISIONMODIFICATIONCHANGE NUMBERDATEENGINEER
(R02)
166
6734
50135
181
218
160
193 (53mm Printer)/
172 32mm printer
5.7”
E
D
C
B
A
87654321
A
B
C
D
E
F
1 2 3 4 5
PROJEKTION
Dateiname des Zeichnungsobjektes:
APOLLO_RTM_TOOLINGDateityp:
ASSEMDateiname der Zeichnung:
APOLLO_RTM_TOLING
Allgemeintol.DIN ISO
2768-m-S
Werkstück
-kanten
DIN 6784
Maßstab 1:2 Gew.: 0.000 kgWerkstoff: Halbzeug:
Datum Name Benennung:
ApolloGeneral Dimensions
Bear. 11.02.2013 P. Woitzik
Gepr.
Norm
Domino Laser GmbHFangdieckstrasse 75a
D-22547 Hamburg
Zeichnungsnummer:
INFORMATIONBlatt1
1 Bl.Zust. Änderung Datum Nam. (Urspr.) (Ers.f.:) (Ers.d.:)
M5 (4x)
66.5
75
232
75
75
200
307
162.
2
214.4
75
75
200
E
D
C
B
A
87654321
A
B
C
D
E
F
1 2 3 4 5
PROJEKTION
Dateiname des Zeichnungsobjektes:
APOLLO_RTM_TOOLINGDateityp:
ASSEMDateiname der Zeichnung:
APOLLO_RTM_TOLING
Allgemeintol.DIN ISO
2768-m-S
Werkstück
-kanten
DIN 6784
Maßstab 1:2 Gew.: 0.000 kgWerkstoff: Halbzeug:
Datum Name Benennung:
ApolloGeneral Dimensions
Bear. 11.02.2013 P. Woitzik
Gepr.
Norm
Domino Laser GmbHFangdieckstrasse 75a
D-22547 Hamburg
Zeichnungsnummer:
INFORMATIONBlatt1
1 Bl.Zust. Änderung Datum Nam. (Urspr.) (Ers.f.:) (Ers.d.:)
M5 (4x)
66.5
75
232
75
75
200
307
162.
2
214.4
307
214.4
162.
210.4” 232
E D C B A
87
65
43
21
ABCDEF
12
34
5
PROJEK
TION
Datein
ame d
es Zeich
nu
ng
sob
jektes:
APO
LLO_RTM
_TOO
LING
Dateityp
:
ASSEM
Datein
ame d
er Zeich
nu
ng
:
APO
LLO_RTM
_TOLIN
G
Allg
emein
tol.
DIN
ISO2768-m
-S
Werkstü
ck
-kanten
DIN
6784
Maßstab 1
:2
Gew.:0.0
00
kgW
erkstoff:
Halb
zeug
:
Datu
m N
ame
Ben
enn
un
g:
ApolloGeneral Dim
ensions
Bear.
11.02.2013P. Woitzik
Gep
r.
No
rmDo
min
o Laser G
mb
HFan
gd
ieckstrasse 75aD
-22547 Ham
bu
rg
Zeich
nu
ng
snu
mm
er:
INFORM
ATION
Blatt1
1 B
l.Z
ust.
Än
deru
ng
Datu
mN
am.
(Ursp
r.)(Ers.f.:)
(Ers.d.:)
M5 (4x)
66.5
75
232
75
75
200
307
162.2
214.4
7566.5
Two print head width options (32mm and 53mm) offer a range of print areas at 300dpi
Scan the code to find out more about V-Series
62.5
0
The smart solution to thermal transfer coding
The V230i prints high resolution codes, text and images onto flexible foils, films and labels.
Unlike other thermal transfer coders, the V230i uses intelligent Technology to meet all your general purpose coding needs while keeping your costs as low as possible.
The i-Tech Ribbon Drive uses up to 60% less ribbon per print and virtually eliminates downtime related to ribbon break due to its unique dancing arm tension control. Ribbon change is also quick and infrequent thanks to cassette loading of larger than standard ribbon rolls.
Being small and compact, the V230i will fit into most existing thermal transfer brackets, so you can quickly upgrade your existing equipment with minimal installation cost.
A diverse range of applicationsDomino’s V230i printers are ideal for goods packed using VFFS and HFFS machines and labellers across a wide range of food and healthcare applications:
Greener credentialsDomino is committed to sound environmental practices and minimising the consumption of natural resources and energy and the creation of waste. We invest in our supply chain to ensure good social and environmental practice and we are supportive of developments to improve corporate accountability. Wherever practical our products are RoHS and WEEE compliant so that they are recyclable.
V230iInnovative design has enabled a 40% reduction in weight(compared to previous models), helping to minimiseenvironmental impact. Moreover, by enabling you to use up to60% less ribbon and no compressed air, the Domino V230i alsohelps you to reduce your carbon footprint.
Print variable product information (e.g. ingredients lists) onto generic packaging. Easily highlight specific text in compliance with European food labelling regulations
Clean, taint free technology eliminates risk of product contamination
Clear, readable codes on every pack
Ribbons to suit a wide variety of packaging materials
Performance to meet all applications
High Performing
The V230i can print consistently from low to high speeds (10-750mm/sec), exceeding the requirements of most production lines. The integrated print head heater ensures code quality is maintained, even at low operating temperatures.
Ribbons
A full range of Domino ribbon grades are available, allowing us to select the optimum grade, matching your packaging material and post processing requirements.
Quick to install and retro-fit
Versatile
Intermittent or Continuous printing modes are offered in the same printer, which can quickly convert between Left and Right handing to be ready to fit all configurations of VFFS / HFFs and labellers.
The V230i can also be used with a choice of interface devices to provide the level of control and security you require. You can even use an existing or shared PC based interface device to keep things simple on the production line.
Capable
At 300 dpi, the V230i supports text, logos, dynamic bar codes and 2D codes with ease. It can also link seamlessly with a database to download specific information for each print. Two print head width options (32mm and 53mm) offer a range of print areas.
Efficient
Domino’s i-Tech Ribbon Drive offers 4 ribbon save settings including ‘Economy Mode’ which allows you to use up to 60% less ribbon per print – without affecting print quality. As well as reducing ribbon costs this increases the effective ribbon roll length, significantly reducing costs associated with ribbon changeovers.
Quickest ribbon changeovers guaranteed with ergonomic cassette design, easy ribbon loading and fast calibration
Easy to use
QuickStep User Interface - no action is more than 3 taps away
QuickStep is our unique, simplified operator interface that gets the printer in action as quickly as possible. No complex menus or parameters, just enter the job and away you go.
• Large user friendly icons and customisable home screen for quick access to favourite menus and settings
• Create and edit messages easily using the WYSIWYG drag and drop message editor at the line side
• Intuitive 3-tier menu structure makes QuickStep quick to learn and simple to remember
• Simplified Message Store and live WYSIWYG message preview to speed up changeovers and help eliminate coding selection errors
QuickDesign Lite - Simplifying message design
QuickDesign Lite is a single, easy to use Windows® application that gives you the flexibility of creating all types of coding messages from a remote PC. It also lays the foundation for providing increased automation of your coding needs.
• Simply create, edit and send your message to your V230i by network or USB stick
• Allows simple highlighting of text in compliance with European food labelling regulations.
• Available for your V230i at no extra cost
• Easily upgradeable to QuickDesign for increase connectivity, control and Coding Automation capabilities
Print variable text, logos and 2D codes over larger areas onto papers, films and labels
Service and support excellence With over 35 years as a preferred global partner to many manufacturers and OEMs, we have built an excellent reputation for our portfolio of coding solutions and for delivering the best service. From initial consulting, through commissioning to service and support, our people’s expertise and understanding ensure we match your specific coding needs and meet your expectations as a partner you can rely on.
The V230i delivers the performance to meet all your general purpose printing and coding applications. Using a single, versatile system means you can also save on maintenance, inventory and training costs.
Lowest running costs – thanks to the i-Tech Ribbon Drive Reliable
Downtime caused by ribbon breaks is virtually eliminated by i-Tech’s unique Dancing Arms, which constantly maintain ribbon tension. Additionally, the system does not need compressed air, further improving reliability and reducing running costs.
SmartAutoAlign, our unique (patent pending) head control technology, simplifies installation. At the touch of a button, the print head automatically aligns to the optimum position, without the need for shims or tools. There is also no need supply or connect compressed air.
CompatibleThe V230i is compact, allowing it to retro-fit simply into your existing thermal transfer brackets with use of a simple adapter block.
Retro-fit can be achieved in under an hour and because the V230i is also compatible with other label
creation and printer control software packages, you can get all the benefits of V230i without re-creating all your messages or changing the way you work.
Recommended