9286 Ds Opsycom Pfp

Loose Tube 9286 ds OPSYCOM PFP.doc

www.prysmiangroup.com Issued June 18, 2015, CER / Page 1 of 2

Multi loose tube steel wire armoured optical cable

Cable Design IEC/EN 60794

Central strength member (CSM): glass fibre reinforced plastic material (FRP) with or without over-sheathing.

Tube: thermoplastic material, containing single-mode optical fibres and filled

with a suitable water tightness compound.

Stranding: the required number of elements (tubes or fillers) are SZ stranded around the central strength member.

Longitudinal Water Tightness: water swellable elements (dry core).

Inner Sheath: black MDPE

Armour: galvanized steel wire

Outer Sheath: black HDPE

- not to scale -

Technical data No. of Fibres 24

Design 4x6+2x0

Approx. Inner Sheath thickness mm 1.5

Approx. Outer Sheath thickness mm 2.0

Approx. Cable Diameter mm 16.5

Approx. Approx. Cable Weight kg / km 385

Max tension N 4000

Min. bending radius mm Without Tension

20 x Cable-Ø

Under Maximum Tension

25 x Cable-Ø

Temperature range °C Installation -10 -> +70;

Transport. & Storage -40 -> +85 ;

Operation -40 -> +85

Please refer to our General Installation, Safety & Handling recommendations before handling.

Main characteristics Test Standard Value Pass criteria

Maximum Tension IEC 60794-1-2-E1 4000 N fiber strain ≤0.33%, reversible

Crush resistance IEC 60794-1-2-E3 4400 N / 10cm 0.05 dB , cable integrity

Impact IEC 60794-1-2-E4 5Nm, 25 impacts 0.05 dB, cable integrity

Cable bend IEC 60794-1-2-E11 R = 20 x cable Ø 0.05 dB, cable integrity

Temperature range IEC 60794-1-2-F1 -40 -> +85°C 0.05 dB /km

Water Penetration IEC 60794-1-2-F5B sample=3m, water=1m No water leakage after 24 hour up

to inner sheath

Optical Characteristics

See the attached cabled optical fibre data sheet for fiber acc. ITU-T G652D

OPSYCOM PFP

9286

Loose Tube 9286 ds OPSYCOM PFP.doc

www.prysmiangroup.com Issued June 18, 2015, CER / Page 2 of 2

Identification

Fibre Colours

No. 1 2 3 4 5 6

Color White Red Green Blue Yellow black

Tube Colours

No. 1 2 3 4

Color Red blue green yellow

Sheath Colour:

The outer sheath colour is black.

Sheath Marking:

The outer sheath is marked in 1 meter intervals as follows:

PRYSMIAN <month/year> SCOP OPSYCOM PFP <number of fibers> <fiber type>

<meter marking>

Logistic

Packing:

Wooden drums with protection.

Delivery Lengths:

Standard delivery length is 4 km with a tolerance of - / + 3%

© PrysmianGroup 2015, All Rights Reserved

All sizes and values without tolerances are reference values. Specifications are for product as supplied by PrysmianGroup: any modification or

alteration afterwards of product may give different result.

The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of PrysmianGroup. The information is believed to be correct at the time of issue. PrysmianGroup reserves the right to amend

this specification without prior notice. This specification is not contractually valid unless specifically authorised by PrysmianGroup.