Upload
amir11601
View
234
Download
0
Embed Size (px)
DESCRIPTION
fiber cable
Citation preview
Loose Tube 9286 ds OPSYCOM PFP.doc
www.prysmiangroup.com Issued June 18, 2015, CER / Page 1 of 2
Multi loose tube steel wire armoured optical cable
Cable Design IEC/EN 60794
Central strength member (CSM): glass fibre reinforced plastic material (FRP) with or without over-sheathing.
Tube: thermoplastic material, containing single-mode optical fibres and filled
with a suitable water tightness compound.
Stranding: the required number of elements (tubes or fillers) are SZ stranded around the central strength member.
Longitudinal Water Tightness: water swellable elements (dry core).
Inner Sheath: black MDPE
Armour: galvanized steel wire
Outer Sheath: black HDPE
- not to scale -
Technical data No. of Fibres 24
Design 4x6+2x0
Approx. Inner Sheath thickness mm 1.5
Approx. Outer Sheath thickness mm 2.0
Approx. Cable Diameter mm 16.5
Approx. Approx. Cable Weight kg / km 385
Max tension N 4000
Min. bending radius mm Without Tension
20 x Cable-Ø
Under Maximum Tension
25 x Cable-Ø
Temperature range °C Installation -10 -> +70;
Transport. & Storage -40 -> +85 ;
Operation -40 -> +85
Please refer to our General Installation, Safety & Handling recommendations before handling.
Main characteristics Test Standard Value Pass criteria
Maximum Tension IEC 60794-1-2-E1 4000 N fiber strain ≤0.33%, reversible
Crush resistance IEC 60794-1-2-E3 4400 N / 10cm 0.05 dB , cable integrity
Impact IEC 60794-1-2-E4 5Nm, 25 impacts 0.05 dB, cable integrity
Cable bend IEC 60794-1-2-E11 R = 20 x cable Ø 0.05 dB, cable integrity
Temperature range IEC 60794-1-2-F1 -40 -> +85°C 0.05 dB /km
Water Penetration IEC 60794-1-2-F5B sample=3m, water=1m No water leakage after 24 hour up
to inner sheath
Optical Characteristics
See the attached cabled optical fibre data sheet for fiber acc. ITU-T G652D
OPSYCOM PFP
9286
Loose Tube 9286 ds OPSYCOM PFP.doc
www.prysmiangroup.com Issued June 18, 2015, CER / Page 2 of 2
Identification
Fibre Colours
No. 1 2 3 4 5 6
Color White Red Green Blue Yellow black
Tube Colours
No. 1 2 3 4
Color Red blue green yellow
Sheath Colour:
The outer sheath colour is black.
Sheath Marking:
The outer sheath is marked in 1 meter intervals as follows:
PRYSMIAN <month/year> SCOP OPSYCOM PFP <number of fibers> <fiber type>
<meter marking>
Logistic
Packing:
Wooden drums with protection.
Delivery Lengths:
Standard delivery length is 4 km with a tolerance of - / + 3%
© PrysmianGroup 2015, All Rights Reserved
All sizes and values without tolerances are reference values. Specifications are for product as supplied by PrysmianGroup: any modification or
alteration afterwards of product may give different result.
The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of PrysmianGroup. The information is believed to be correct at the time of issue. PrysmianGroup reserves the right to amend
this specification without prior notice. This specification is not contractually valid unless specifically authorised by PrysmianGroup.