View
1
Download
0
Category
Preview:
Citation preview
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.1
3Crown-Operated Stop Watches
STypePin-anchor movement, 1 jewel, shock-proof, ABS-special housing, 30-minutes counter, start, stop,flyback by pressing the crown knob.
39035
Stroke Counters
TypeWith key reset, operating lever returns to zeroposition automatically after each stroke. addingnumbers in one stroke direction, stroke deflection:min. 38° - 60°, stroke direction: away from user,right-hand and left-hand driving shaft, back and frontmount.
39025
max. stroke/min. Number of digits Digit height Base area 39025 …mm mm
500 6 4,5 70 x 60 101
39025
Housing Ø Graduation 39035 …mm sec./min.
55 0,2/0,01 101
39035
Elapsed-Time Stop Watches
STypePin-anchor movement, 1 jewel, shock-proof, ABS-special housing, 30-minutes counter, start and stopby pressing the crown knob as often as necessary.Flyback by pressing the knob on the side of thehousing.
39040
Housing Ø Graduation 39040 …mm sec.
55 0,2 201
39040
Digital Stop Watches
STypeWaterproof ABS-housing, easily readable 7-digit LC-display, digit height 8mm, displays up to 9 hours, 59minutes, 59,99 seconds. Protective pouch, lanyardand battery 1,5 V, type LR 6, AA, included.
Functions: Start/Stop/Reset/Addition/ Split/Lap/Time. Memory for 5 values: 5 split and lap times.
Note:Spare batteries see cat.-no. 39900 403.
39045
Size Weight 39045 …mm approx. g
22 x 61 x 28 90 101
39045
Digital Stop Watches
STypeUltrasonic-welded display, waterproof ABS-hou-sing, 2-button operation. 1/100 min., 1/100 sec.selectable. 2,5-line LC-display: upper line with 6digits showing battery condition, lower line with 7digits, function window for lap/normal time, 2-digitmemory display, digit height 7 mm/5 mm. Displayrange: upper line up to 9.999,99 min., lower line upto 99.999,99 min. Functions at 1/100 min.:- Start/ Stop/ Reset – Split/ Lap/ Addition (split and
lap can be read simultaneously), , - time of day, date, - memory for 65 values of split and lap.
Functions at 1/100 sec.:- Start/ Stop/ Reset – Addition/ Split/ Lap /Short-Lap,- preset split time out of normal time,- Count down (count down and stop watch can be
used simultaneously),- time of day, date, - memory for 65 values with evaluation, - quick search.Incl. of lanyard, protective pouch, and battery 1,5V,type LR 03, AAA.
Note:Spare batteries see cat.-no. 39900 404.
39050
Size Weight 39050 …mm g
82 x 61 x 28 85 301
39050
eng/OP
• Stop Watches • Tachometers • Hand tachometers
www.hhw.de39.2
3Hand Tachometers
DEUMOTypeWorks on the eddy-current principle, push-buttonlocking of the respective measured value, accuracyof display +/-0,5% (referring to the final value),measuring range split into 3 scales: 40 - 500 · 400 -5000 · 4000 - 50000 1/min., complete with rubberpointed tip, rubber hollow tip, driver cone, roller discfor surface speed measurement, extension andspare tips, in case.
ApplicationFor measuring rotational speed and cutting speed(roller disc) with continuous display, for eitherdirections!
39110
Measuring range Dial 39110 …1/min. Ø mm
40 - 50.000 74 101
39110
Table Stop Watches
STypeQuartz-controlled, display 0 - 60 seconds, 0 - 60minutes, inner scale 0 - 100/100 minutes, dial faceØ 110 mm.Functions:1. Start/Stop
Reset (Flyback),2. Addition (as often as required)
Reset (Flyback), Dimensions 175 x 130x 40/95 mm, battery 1,5V,type LR 6, AA, included.
Note:Spare batteries see cat.-no. 39900 403.
39055
39055 …
101
39055
Digital Precision Hand Tachometers
iTypeExtremely robust precision instruments, housingmade of diecast aluminium. For frequent use in theindustry, for measurements of rotational speed,speed, and length.
Note:Spare batteries see cat.-no. 39900 403.
39117 101Precision hand tachometers SMT-500CTypeFixed measuring shaft, on which a measuring tip ora measuring wheel is mounted. Contact measure-ment has the advantage of much higher resolutionper measuring shaft revolution. The 60 impulses perrevolution make the SMT-500C a device for maxi-mum accuracy across the whole measuring range.
39117 102Laser hand tachometers SMT-500CLTypeContactless measurements by means of a clearlyvisible laser for distances up to 4 metres. A contactadapter allows for measuring the following with a
measuring tip or measuring wheel: rotational speed,speed, or length, in different units of measurement.
Note:Required reflective stickers for laser measuring seecat.-no. 39117 103.
39117 103Reflective stickers, sheet of 35ApplicationFor measuring with laser hand tachometer SMT-500CL see cat.-no. 39117 102.
39117 104Measuring tip made of metal with rubber insert.
39117 105Measuring cone made of metal with rubber insert.
39117 106Measuring wheel Ø 6 inch made of plastics withrubber insert.
39117 101
39117 102
Type 39117 …
SMT-500C 101SMT-500CL 102
Reflective stickers (35 pcs.) 103Measuring tip SMT-902 104
Measuring cone SMT-903 105Measuring wheel Ø 6 inch 106
39117
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.3
3
Technical SpecificationsCat.-no.: 39117 101 39117 102Type: SMT-500C SMT-500CL
. Measuring range Contact measurement: 0,1 - 25.000 RPM 6 - 25.000 RPM
. Measuring range laser measurement: - 6 - 99.999 RPM
. Type of measurement: Contact measurement Contact measurement/photooptical recording of laserOperating modes
. Rotational speed: RPM contact/RPH contact RPM contact/RPH contact
. Speed: m/min / m/h / yd/min / yd/h / ft/min / ft/h / in/min / mi/h m/min / yd/min / ft/min / in/min
. Length: m / cm / yd / ft / in m / cm / yd / ft / in
. Counting: Number of revolutions -Accuracy
. Rotational speed: 0,006% (+/- 1 RPM) / 0/- 0,06 RPM (starting at 1.000 RPM) / 0,006% (+/- 1 RPM) / +/- 0,06 RPM (starting at 1.000 RPM) / +/- 0,6 RPM (starting at 10.000 RPM) +/- 0,6 RPM (starting at 10.000 RPM)
. Speed/length: 0,4% (+/- 1 digit) -
. Measuring wheel: - 0,4%Resolution
. Rotational speed: 60 impulses/revolution 8 impulses/revolution (with adapter)
. Length: 0,00254 m/impulse (with 6" Measuring wheel) 0,01905 m/impulse
. Display: max. 2 decimal places without decimal placeDisplay
. Type of display: LCD, 5 digits, digit height 12 mm LCD, 5 digits, digit height 12 mm
. Update time: 1.000 msec 1.000 msec
. Measured value storage: min / max / last min / max / last
. Additional memory: 10 free measured values 10 free measured values
. Temperature range operation: 0 - 45° 0 - 45°
. Weight (incl. of batteries): 340 g 370 g
. Dimensions L x W x H 183 x 63 x 46 mm 203 x 63 x 46 mm
. Housing made of : diecast aluminium diecast aluminium
. Tripod mount: 1/4-20 UNC, length 8 mm 1/4-20 UNC, length 8 mmBatteries
. type: 2 x 1,5 V AA (cat.-no. 39900 403) 2 x 1,5 V AA (cat.-no. 39900 403)
. Service life: approx. 60 h approx. 35 h
. Low battery alarm: Yes Yes
. Scope of supply: tachometer SMT-500C, measuring tip, measuring cone, tachometer SMT-500CL, contact adapter, measuring tip, measuring6 inch measuring wheel, extension, operation manual, cone, 6 inch measuring wheel, extension shaft, reflective stickers, 2 x batteries type AA, carrying case operation manual, 2 x batteries type AA, carrying case
Tachometers TESTO 465/470
.39120 101TESTO 465TypeOptical measurement value recorder with modulatedlight beam. Easiest one-hand operation, Max-/Min-function, memory forof average/maximum value, lastmeasurement value after shut down, distance tomeasuring object max. 350 mm, auto-off function(30 sec.). In carrying case incl. of SoftCase (pro-tection sleeve), reflective stickers, calibrationprotocol and battery 1,5 V, type LR 6, AA.
ApplicationFor contactless measuring of rotational speed inindustry and trade, e.g. on shafts of filter pumps, onturbines and pumps, on fans and ventilators etc.
39120 100TESTO 470Similar to cat.-no. 39120 101, but mechanicalrotational speed measurement as an option.
Note:Spare batteries see cat.-no. 39900 403.
39120 102Reflective stickersSelf-adhesive, 150 mm (1 pack = 5 pcs.).
39120 100 39120 101
39120 102
Type Measuring range optical Measuring range mechanical Accuracy Dimensions Weight 39120 …rpm rpm mm g
TESTO 465 1.00 … 99.999 – +/- 0,02% of meas. val. (+/- 1 digit) 144 x 58 x 20 145 101TESTO 470 1.00 … 99.999 1.00 … 19.999 +/- 0,02% of meas. val. (+/- 1 digit) 175 x 60 x 28 190 100
Reflective stickers – – – – – 102
39120
Measuring Instrument for Rotational Speed, optical TESTO 460
.TypeOptical rotational speed measurement with LEDsighting. Max/min values. Operating temperature 0 -50 °C.
Scope of supply:TESTO 460, calibration protocol, wrist lanyard, beltbag, protection cap, batteries (2 x AAA).
Note: Reflective stickers see cat.-no. 39120 102.Spare batteries see cat.-no. 39900 404.
39121 …Type
TESTO 460 101
39121
Technical specifications: TESTO 460. Measuring range: 100…29.999 rpm. Resolution: 0,1 rpm (100…999,9 rpm)
1,0 rpm (1.000-29.999 rpm). Accuracy: +/-(0,02 % of meas. val.) +1 digit. Units: rpm, rps. Dimensions (incl. of protection cap): 119 x 46 x 25 mm
eng/OP
• Stroboscopes • Thickness Measuring Instruments
www.hhw.de39.4
3
Stroboscopes
iApplicationFor inspecting repetitive movements, determiningfrequency and rotational speed.Especially for quickmovements such as vibrations, which the humaneye cannot discern.Hand-held or on tripod.
39123 101Stroboscope SMS-400BType High brightness. Simple one-hand operation withquick frequency doubling or halving, exact fineadjustment. Phase shift for adjustment of positionand slow motion. Battery operated. With replaceableNiMH rechargeable battery and operation manual, incarrying case.
Note:Spare rechargeable battery see cat.-no. 39123 102. Spare flash tube see cat.-no. 39123 103.
39123 102Spare rechargeable batteryFor stroboscope SMS 400B (39123 101).
39123 103Spare flash tubeFor stroboscope SMS 400B (39123 101).
39124 102Stroboscope SMS-103ETypeLED manual stroboscope for industrial, measuringrange 60 - 120.000 flashes per minute. Highestprecision and constantly high brightness thanks toelectronic flash control. No wear on flash tubes.Output signal for synchronous triggering of otherflash units. Mains operation or battery operated.With NiMH rechargeable batteries (type AA), multi-purpose power supply unit and operation manual, incarrying case.
Note:Spare rechargeable batteries see cat.-no. 39905203.
39124 102
Type 39123 … 39124 …
SMS-400B 101Spare rechargeable battery 102
Spare flash 103SMS-103E 102
39123 - 39124
Technical SpecificationsCat.-no.: 39123 101 39124 102Type: SMS-400B SMS-103E
. Application range: 40 - 12.500 60 - 120.000 FPM
. Accuracy: 0,01% (+/- 1 digit) 0,02% (+/- 1 digit)
. Resolution: 0,1 - 1,0 FPM 0,1 - 10 FPM / 0,001 - 0,1 Hz (dependent on the measuring range)
. Phase shift internal trigger: 360° 360°
. External trigger: – 6° - 360° (resolution 6°)
. Delay time: – 0 - 999 msec
. Multiplier: x 2 / x 0,5 x 2 / x 0,5
. Signal output: 5V TTL 3VDC, 150 µsec
. Signal input: 5V TTL optocoupler/ 12 mA / less than 1,0 V 50 µsec min. pulse duration
. Type of display: LCD, 2 x 8 dot matrix LCD, 6-digit, illuminatedFlash
. Type: xenon, 10 W high-power LEDs, white 6500 K
. Duration of flash/flash power: 15 µsec / approx. 15 - 400 Lux at a distance of 50 cm 0,2 - 100 µsec / approx. 140 - 700 Lux at a distance of 50 cm
. Temperature range operation: 0 - 40°C 0 - 35°C
. Weight (incl. of batteries): 650 g 700 g
. Housing made of: polycarbonate aluminium
. Tripod mount: 1/4-20 UNC, length 8 mm 1/4-20 UNC, length 8 mm
. Power supply: exchangeable NiMH rechargeable battery 4 x NiMH rechargeable battery, type AA (cat.-no. 39905 203) / Power supply unit/battery charger 100 - 240 V DC (50 - 60 Hz)
. Overload protection: x x
. Operation during charging time: - x
. Scope of supply: stroboscope SMS-400B, NiMH rechargeable battery, stroboscope SMS-103E, 4 x NiMH rechargeable battery, Operation manual, carrying case, multi-purpose power supply unit, operation manual, Spare flash tube carrying case
39123 101
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.5
3
Thickness Measuring Instruments QNix® 1500 / 1500 M
Note:Spare batteries see cat.-no. 39900 405.
39150 101QNix® 1500TypePrecision thickness measurements with very easyuse. Wide range of operation for different metalundergrounds, large measuring range from 0-5000µm at both measuring methods, Fe und NFe.Normally, a minimum of four instruments arenecessary - one each for measuring the lower andupper measuring range, as well as one each forboth measuring methods.Properties:- both measuring probes Fe and NFe are built-in,- large measuring range 0 - 5000 µm,- high accuracy across the whole measuring range,- no switch-over to other measuring ranges neces-
sary- no change of probes necessary- comfortable one-hand operation- practical construction without cable and plug- high reliability under rough working conditions- no calibration necessary- automatic On/Off- measuring within hard-to-reach locations- memory for the last measurement value- duplex display for reading in any position- serial number is shown on the display- abrasion-proof measuring probes, covered by a
ruby- V-notch for measurements on axes and rods or
shafts.Scope of supply: Thickness measuring instrumentincl. of battery 9 V, type 6 LR 61, case with blankblades, test certificate and operation manual.
39150 102QNix® 1500 MTypeSimilar to QNix® 1500, with additional memory forstoring measured values, statistical information, RS232 interface for data transmission and for onlinemeasurements/evaluations with QNix® software6.21.
Note:Accessories for QNix® 1500 M such as interfacecable RS 232 with plug and socket and PC softwarefor reading and processing data available onrequest.
39150
Type RS 232 39150 …
QNix® 1500 – 101QNix® 1500 M x 102
39150
Technical specifications:. Basic material (substrate) steel and iron: Fe-probe. Non-magnetic metals, e.g. aluminium, zinc, copper, brass, stainless steel: NFe-probe. Measuring range: 0,0 - 5.000 µm and/or 0,00 - 200 mil (reversible). Display of measured values: from 0,00 - 999: µm
from 1,00 - 5,00 in mm and/orfrom 0,00 - 200 mil
. Measuring accuracy: +/- (1 µm + 2 %) of measured value from 0 - 999 µm+/- 3,5% of measurement value within range of 1,00 - 5,00 mm
. Smallest measuring surface: 10 x 10 mm
. Smallest radius of curvature: 5 mm convex / 25 mm concave
. Lowest thickness of basic material: Fe: 0,2 mm / NFe: 0,05 mm
. Temperature range: 0°C - 50°C
. Display: digital (LCD)
. Probes: 1-point, built-in
. Power supply: 9-Volt E-block (alkaline) type 6 LR 61
. Dimensions (L x W x H): 166 x 64 x 34 mm
. Weight: approx. 130 g with battery
. Storage capacity (QNix® 1500 M): memory for 3.900 values
. Storage blocks (QNix® 1500 M): up to 999
. Statistics (QNix® 1500 M): mean value, maximum, minimum
. Interface (QNix® 1500 M): RS 232
eng/OP
• Thickness Measuring Instruments • Wall thickness Measuring Instruments
www.hhw.de39.6
3
Thickness Measuring Instruments QNix® 4200 / 4500
Type High measuring accuracy across the whole measu-ring range. Only one function key. Proven echosensor technology (QuaNix® 4500 with eddy currenttechnology). One-hand operation for all measure-ment tasks. Calibration not required when usedon uncoated basic material. Integrated measuringprobe without cable or plug. Automatic switch-onand off. Metric or imperial display. Acoustic signal.LC-display for measured value, battery charge state,measurement instrument, type of operation andserial number. Scope of supply: Thickness measuring instrument, 2 x 1,5 V Mignonbatteries LR 6 AA, case with zero references, testcertificate, operation manual. Application Especially for applications in the fields automotiveand varnishing.
Note: Spare batteries see cat.-no. 39900 403.
39152 201 QNix® 4200Application For measurements of steel and iron.
39152 202 QNix® 4500Application For measurements of steel and iron as well as non-ferrous metals. The instrument can be switched fromone measuring method to the other by pushing abutton.
39152
Type 39152 …
QNix® 4200 201QNix® 4500 202
39152
Technical specifications:. Basic material (substrate) steel and iron: Fe-probe (4200/4500). Non-magnetic metals, e.g. aluminium, copper, brass: NFe-probe (4500). Measuring range: Fe: 0-3000 µm / NFe: 0-2000 µm. Measuring accuracy: +/- (2 µm + 3%*) (*of measured value). Smallest radius of curvature: 5 mm convex / 25 mm concave. Lowest thickness of basic material: Fe: 0,2 mm / NFe: 0,05 mm. Temperature range: 0°C - 50°C. Display: digital (LCD). Measuring probe: 1-point, built-in. Power supply: 2 x 1,5V Mignon batteries (alkaline) type LR 6, AA. Dimensions: 100 x 60 x 27 mm. Weight: approx. 100 g
Thickness Measuring Instruments QNix® 8500 Basic / 8500 Premium
39153 101QNix® 8500 BasicType High measuring accuracy across the whole measu-ring range. Memory for 100 measured values. 1memory block. 1 possibility of calibration. Ergonomi-cal, modern, illuminated keypad. All languages canbe installed by means of the editor. One-handoperation for all measurement tasks. The probescan be used directly as well as with the adaptercable. Automatic switch-on and off. Metric orimperial display. Acoustic signal. High-resolution,rotating display for measured values, battery,measurement instrument, operating mode and serialnumber. The digital probe has to be orderedseparately because of the modular design of theinstrument.Scope of supply: Thickness measuring instrument without measuringprobe, adapter cable for external probe, testcertificate for optional measuring probe, 2 x 1,5Mignon batteries (AA), operation manual, soft bagwith belt clip, plastic case.
39153 102QNix® 8500 PremiumTypeSimilar to Basic, but with memory of up to 13.000measured values (max. 2.000 measured value perblock). Memory blocks. 100 possibilities of calibrati-on. Choice of resolutions.
ApplicationWide range of application in the car and varnishingindustry, and in corrosion protection.
39154 101-107Accessories for QNix® 8500
Note:Other accessories such as calibration foils, zeroreference plates (also available as complete set)available on request. Please contact us! Spare batteries see cat.-no. 39900 403.
39154 107QNix® software 7.0ApplicationFor wireless, bi-directional exchange between thePC and the manual device via a USB dongle.Automatic device detection, easy set-up, simultane-ous control and management of several QuaNix®
8500 devices. All languages can be installed bymeans of the editor. Allows for downloading andinstalling software and firmware updates via theinternet. Online measurements and OnScreen help.Simple transmission and statistical evaluation ofmeasured value in Excel (data and graphics).QuaNix® software 7.0 is suitable for Windows 2000,XP and with the last SP.Scope of supply: QNix® software 7.0 (1 CD-Rom).
39153 101
39153 102
39154 107
39153 - 39154
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.7
3Type 39153 … 39154 …
QNix® 8500 Basic 101QNix® 8500 Premium 102
Digital probe Fe 2 mm 101Digital probe Fe 5 mm 102
Digital probe NFe 2 mm 103Digital probe Dual Fe 2 mm/NFe 2 mm 104Digital probe Dual Fe 5 mm/NFe 2 mm 105
USB dongle 106QNix® software 7.0 107
Technical Specifications:. Basic material (substrate) steel and iron: Fe-probe. Non-magnetic metals, e.g. aluminium, copper, brass: NFe-probe. Measuring range: Fe: 0-5000 µm / NFe: 0-2000 µm. Measuring accuracy: from 0 - 2000 µm: +/- (1 µm + 2 % of measured value)
2000 µm: +/- 3,5 % of measured value. Smallest radius of curvature: 5 mm convex / 30 mm concave. Lowest thickness of basic material: Fe: 0,2 mm / NFe: 0,05 mm. Temperature range: 0°C - 50°C. Display: digital (LCD). Measuring probe: replaceable. Power supply: 2 x 1,5V Mignon batteries (alkaline) type AA. Dimensions: 124 x 67 x 33 mm. Weight: approx. 120 g
. Thickness Measuring Instruments QNix®
Other thickness measuring instruments QuaNix® with many accessories available on request.
Please contact us!
Ultrasound Wall Thickness Measuring Instruments
TypeImpact-proof, dust-protected, water-proof basic unitwith separate probe. Ultrasound pulse echo processwith S/E probe. Velocity of sound is adjustable from1000-9999 m/s for different materials. Measuringrange 1,2 mm - 225 mm. Zero-point calibration bymeans of integrated steel plate. Frequency range: 5MHz probe. Display of mm and inch. Memory for 10measured values. Permitted surface temperaturesfrom -10° C - +60° C.
Scope of supply:Ultrasound wall thickness measuring instrument incl.of probe, 2 x LR 6 batteries and contact gel, inplastic case.ApplicationFor measuring wall thicknesses of pipes and otherhollow parts.
Note:Spare batteries see cat.-no. 39900 403.
39165 101
39165 102
Type Measuring range Graduation Error tolerance 39165 …mm mm approx. +/- mm
TT100 1,2–225 0,1 0,1 101TT130 1,2–225 0,01 0,02 102
39165
Performance requires quality.www.atorn.com
Dial indicators by ATORN:
ATORN‘s high-quality measuring tools.
eng/OP
• Hardness Testing Instruments
www.hhw.de39.8
3
SHORE Hardness Testers Analogue
Application The hardness is shown in SHORE. Minimumthickness of the material to be measured 6 mm.
Note: Test certificate and calibration available on request.SHORE hardness testers (digital version), testingbase and weight available on request.
39170 101 -102 Application For determining hardness in compliance withSHORE A, see: DIN 53505, DIN EN ISO 868, ASTMD 2240, DIN ISO 7619.
For measuring:Elastomers, casting resins, leather, rubber products,neoprene, polyester, soft rubber, soft PVC.
39170 103-104 Application For determining hardness in compliance withSHORE D, see: DIN 53505, DIN EN ISO 868, ASTMD 2240, DIN ISO 7619. For measuring: acrylic glass, cellulose acetat, printing rolls, hardplastics, ebonite, polystyrene, Resopal, stiff thermo-plastics, vinyl plates.
39170 102
SHORE Drag pointer 39170 …
A – 101A x 102D – 103D x 104
39170
Hand-Held Ball Indentation Hardness Testers
-POLDI-39175TypeMagnifying glass, gauge rod and table, in case(pocket size) included.ApplicationTesting by the Brinell method, for testing materialswith strengths between 300 and 2200 N/mm2,particularly for semi-finished stock of all kinds of
forgeable iron and steel, and for bulky or installedparts. Tensile strength and Brinell hardness canbe taken out of the chart.The specimen must be atleast 12 mm thick and 16 mm wide at the test point(or 12 mm for rounds).
39176Spare gauge rodDimensions: 12,5 x 12,5 x 150 mm.
39175
39175 … 39176 …
101 101
39176
39175 - 39176
Hardness Testing Instrument TH 170
TypeLarge measuring range. Direct, digital display of thehardness scales HLD, HRB, HRC, HB, HV, HS.Measurements possible in any position, accuracy +/-5 %. Connection to PC by means of USB 2.0. Radiistarting at R 50 mm can be measured withoutadditional adapter ring.
Scope of supply:Hardness testing instrument TH 170 incl. of integra-ted impact instrument, testing block, cleaning brush,adhesive paste, works certificate, software, USBcable, 2 x 1,5 V AAA batteries, in plastic case.
Note:Spare batteries see cat.-no. 39900 404.
39180
Technical specifications:Material HLD HRB HRC HB HV HSSteel & cast iron 300 - 900 38 - 100 20 - 68 81 - 654 81 - 955 32 - 100
Type Dimensions Weight 39180 …approx. mm approx. g
TH 170 150 x 22 x 53 130 101
39180
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.9
3
Hardness Testing Instrument TH 160
39185 101Hardness testing instrument TH 160TypePortable scleroscope with handy impact instrument.Large measuring range for the respective parame-ters. Conversion of measured hardness values intotensile strength MPa. Automatic determination ofimpact direction. Memory for up to 1000 measuredvalues. Background illumination, cordless operation.Direct display of the parameters HRC, HRB, HV, HB,HS and HL. With integrated thermal printer andinterface RS 232. Scope of supply:Hardness testing instrument TH 160 with processingdevice, impact instrument D, hardness comparisonblock, adhesive paste, 1 roll of thermal paper, mainsadapter and operation manual, in plastic case.ApplicationFor testing of hardness of large, solid workpieces.Prerequisited: Wall thickness min. 5 mm, workpiece weight min. 5 kg, workpiecesurfaces Ra 10 µm and better.
39185 102Adapter ring set, 7-part. Set contents 1 ea. of:adapter ring radius of curvature convex R10 - R15 /R14,5 - R30 / R25 - R50 / concave R11 - R13 /R12,5 - R17 / R16,5 - R30 / multi-purpose starting atR10.
39185 201Impact instrument Type CApplicationFor thin workpieces, low hardness depths orsensitive surfaces.
39185 202Impact instrument Type DCApplicationFor measuring in narrow areas such as boreholes orhard-to-reach places.
39185 203Impact instrument Type D+15ApplicationFor measuring in grooves.
39185 204Impact instrument Type DLApplicationFor measuring in narrow areas, e.g. in grooves,tooth flank Ø end piece 4,2 mm to 50 mm length.
39185 205Impact instrument Type GApplicationFor Brinell measurements (up to 650 HB).
Note:Further accessories available on request. Spare batteries see cat.-no. 39900 404.
39185 101
Hardness testing instrument TH 160Technical specifications:. Hardness scales Numerical interval Ranges. Rockwell C 0,1 HRC 20 - 68,4 HRC. Rockwell B 0,1 HRB 23,8 - 101,7 HRB. Vickers 1 HV 80 - 955 HV. Brinell 1 HB 19 - 655 HB
Impact instrumentsTechnical specifications: type C type DC type D+15 type DL type G. Impact energy Nmm: 3 11 11 11 90. Length of tester mm: 141 86 162 147 254. Workpiece weight min. kg: 1,5 5,0 5,0 5,0 15,0. Workpiece thickness min. mm: 5 5 5 5 20. Workpiece thickness affixed min. mm: 1 3 3 3 10. Thickness of the hardness layer min. mm: 0,2 0,8 0,8 0,8 –. Measuring imprint Ø mm (e.g. at 600 HV): 0,32 0,45 0,45 0,45 0,90. Measuring imprint depth µm: 8 17 17 17 41
Type Measuring range Error tolerance 39185 …HL approx. %
TH 160 170 - 960 1,5 101Set of adapter rings – – 102
39185 201-205
39185
Stationary hardness testers following the Rockwellprinciple with digital display. Quick high-precisionmeasurements with pressing a single lever. Initialload and test load are applied commonly.
For mounting large and uneven workpieces specialrests are available. Please contact us!
Test modes:
Press-on sleeve principle:
Operating principle:
Functions: AT 130: AT 200:
Measuring height/ Working radius:
Penetration depth measurement with press-on sleeve, Rockwell hardness measurement in compliance with DIN EN ISO 6508,Brinell hardness measurement based on DIN EN ISO 6506,Vickers hardness measurement based on DIN EN ISO 6507.
Resistant against against bending, yielding and overhanging of the test piece.
Initial load and total test load are applied with pressing a single lever.
Choice of scales, tolerances, calibration. In addition to that, statistical data analysis is also available.
215 mm / 220 mm.
Stationary Rockwell Hardness Testers AT 130/200
Type 39185 …
C 201DC 202
D +15 203DL 204G 205
eng/OP
• Inspection Mirrors • Workshop Mirrors • Inspection Mirror
www.hhw.de39.10
3
. Combination Hardness Testing InstrumentsHP Universal 250
A robust, yet high-precision and universally useablestationary hardness tester for all standard hardnessmeasurements. Digital and optical evaluation via built-in colour-LCD-monitor with video camera. Digitalgauge marks can be created, therefore no risk of
parallaxes. Exchange of objective not required thanksto one-step zoom objective. All necessary magnificati-ons are integrated in the basic unit.Please contact us!
Test modes:
Operating principle: Functions:
Measuring height/ Workingradius:
Technical specifications:
Rockwell all Rockwell scales with initial load 98,07 N (10 kp), Normal-Rockwell such as HRA, HRB, HRC,all Rockwell scales with initial load 29,42 N (3 kp), Super-Rockwell such as HR15N, HR30T, HRY.
Brinell 1 - 2,5 - 5 - 6,25 - 10 - 15,625 - 30 - 31,25 - 62,5 - 100 - 125 - 187,5 - 250 (750). Possible test procedu-res: 1/1 - 1/2,5 - 1/5 - 1/10 - 1/30 - 2,5/6,25 - 2,5/15,625 - 2,5/31,25 - 2,5/62,5 - 2,5/187,5 - 5/25 - 5/62,5 -5/125 - 5/250 - 10/100 - 10/250 (other and older HB procedures available on request).
Vickers 1 - 2 - 3 - 5 - 10 - 20 - 30 - 40 - 50 - 60 - 80 - 100 (other and older HV-methods available on request).
Brinell depth measurement HBT 2,5/62,5 - 2,5/187,5 - 5/250.
Vickers depth measurement HVT 30 - 100.
Ball pressure (for plastics) HMR 5/250.
Rockwell in compliance with DIN EN ISO 6508 and ASTM, Brinell in compliance with DIN EN ISO 6506 and ASTM and depth measurement HBT, Vickers in compliance with DIN EN ISO 6507 and ASTM and depth measurement HVT, Ball pressure gemäß DIN ISO 2039 T1. Load application servo-controlled. 200 freely definable programmes and customised adaptation of the software for easiest operation.400 mm / 230 mm.
. Test Machines for Universal Applications The Inspekt test machines for universal applications havebeen developed for testing materials and workpieces in theareas quality assurance and incoming goods.Application fields- Testing metals, plastics and fabrics for tension, compression,
bending, peeling. - Testing of workpieces. Mechanical setupThe Inspekt test machines for universal applications are availablein the following load frame setups (depending on load) 3 / 5 / 10 / 20 / 30 / 50 / 100 / 250 / 300 / 400 / 500 kN. Electro drive.
Evaluation - Stand-alone version (testing of workpieces, in production): Parametring of the tests directly at the control. The display showsthe maximum and break force as well as cross arm distances.
- PC version (more sensitive tests): transmission of measured values to a PC. Control and analysis oftest with the Windows-software Labmaster.
Type SetupInspekt mini 3 kN Speed 0,05 - 1000 mm/min., cross arm stroke pressure 850 mm, measuring depthmm, Inspekt mini 5 kN Measuring range 1 - 100% of the respective load cell, measuring class 1. Inspekt desk 10 kN Speed 0,05 - 500 mm/min., cross arm stroke pressure 1100 mm, measuring width 420 mm,Inspekt desk 20 kN can be used as stand-alone or desktop device,Inspekt desk 30 kN Measuring range 1 - 100% of the respective load cell, measuring class 1.Inspekt desk 50 kNInspekt 100 kN Speed 0,1-250 mm/min., cross arm stroke pressure 1100 - 1600 mm, measuring width 610 - 750 mm,Inspekt 200 kN as stand-alone,Inspekt 300 kN Measuring range 0,4 - 100% of the respective load cell, measuring class 1.Inspekt 400 kNInspekt 500 kNAccessories (clamping tools, tensometer), software LABMASTER and special load frames available on request.Also suitable for machines of other manufacturers.
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.11
3
The micro hardness tester HP-M2 (system Leica) offers great user-friendlyness,the focussing assistance helps quickly finding the focus level, especially when workingwith highly-polished microsections. Thanks to the extraordinary optics, it can also beused as a simple bright field metal microscope.
Please contact us!
. Micro Hardness Testing Instrument HP-M2 System Leica
Inspection Mirrors
39200 101Type2-part, with metal handle.
39200 102Type2-part, with plastic handle.
39200 101
Mirror Ø Length 39200 …mm mm
30 210 10124 260 102
39200 102
39200
Flexible Workshop Mirrors
,TypeMirror housing made of aluminium, flexible, brasschrome-plated metal hose. The mirror can be
adjusted to the desired angleby means of the handle.
39205
Mirror size Shank length 39205 …mm mm
50 x 70 500 101
39205
Inspection mirror
TypeInspection mirror with telescopic handle. Thanks tothe oval telescopic tube, an accidental turning of themirror is impossible.
39206 101
Mirror Ø Length 39206 ...mm from - to mm
30 240 - 680 10150 240 - 680 102
39206 102
39206
Illuminated inspection mirror
TypeFlexible shank, the angle of the mirror can beadjusted by using the thumb up to 90°. Strong lampfor the illumination of dark areas.
Note:Spare batteries see cat.-no. 39900 403.
39211
Length 39211 …mm600 101
39211
Mirror Ø 39210 …mm
14 / 24 / 30 101
Inspection Mirrors 39210
TypeWith illumination, flexible shank and plastic handlefor the battery 1,5 V, type LR 14, with 3 exchange-able mirrors, 14 mm Ø magnifying, 24 and 30 mm Ø planar. The mirrors are replaceable by means ofthe thread, this enables the user to look into smallopenings. Smallest Ø without mirror 11 mm,smallest Ø with mirror 14 mm.
ApplicationThe light falls onto the mirror and is reflected by thevisible surface of the mirror.
Note:Spare batteries see cat.-no. 39900 402.
39210
eng/OP
• Folding Pocket Magnifying Glasses • Illuminated Magnifying Glasses • Watchmaker's Magnifying Glasses • Magnifying Glasses
www.hhw.de39.12
3
Folding Pocket Magnifying Glasses
TypeMain magnification 2-x, integrated 4-x magnification.
Round plastic lens built-in in square frame. Withblack case.
39213
39213 …
101
39213
Folding Pocket Magnifying Glass Tech-Line
dTypeWith aplanatic optics, glass lens.Frame made ofblack plastics. Intuitive one-hand operation. The
intelligent design promotes calm holding andensures a perfect feel of the surface - an importantAdvantage when it comes to strong magnifications.
39215 201-205
Magnification Lens Ø 39215 …mm
6-x 22,8 2018-x 22,8 202
10-x 22,8 20315-x 22,8 20420-x 16,3 205
39215
Folding Pocket Magnifying Glasses
Type 2 lenses, housing made of brass, frame made ofzinc, chrome-plated.
39216
Magnification Lens Ø 39216 …mm
10-x 21 10120-x 21 102
39216
Biconvex folding Pocket Magnifying Glasses
TypeWith biconvex lenses made of silicate glass.Housing made of highly polished stainless steel.
39217 101dTypeMagnification 4-x and 6-x, when combined, 10-x.
39217 102TypeMagnification 3-x, 6-x, and 9-x.
39217 10239217 101
Magnification Lens Ø Number of lenses 39217 …mm
4-x/ 6-x/ 10-x 30 2 1013-x / 6-x / 9-x 30 3 102
39217
Watchmaker's Magnifying Glass Tech-Line
dTypeAplanatic lens system, helpful testing instrument
with perfect displaying characteristics. Housingsolvent-resistant and scratch-proof coated.
39220
Magnification Lens Ø 39220 …mm
6-x 22,8 2018-x 22,8 202
10-x 22,8 20315-x 16,3 204
39220
Magnification Housing dimensions 39214 …mm
4-x 86 x 54 x 6 101
Illuminated Pocket Magnifying Glasses easyPOCKET
lTypeDiffractive aspherical lens (very flat and thin) forsliding into the credit card sized housing. Housingcolour: metallic blue.- extremely flat and lightweight design: small case
for protection in any pocket- brilliant picture with 4-x magnification
- very bright LED illumination when the lens is pulledout
- very economical. The LED switches on automatic-ally, only when the lens is fully extended.
- very small, powerful SMD LED illumination withalmost unlimited service life
Batteries included (2 x Mignon 1,5 V, type2025).
39214
39214
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.13
3
Watchmaker's Magnifying Glasses
TypeWith 2 glass lenses.
39222 101
Magnification Lens Ø 39222 …mm
3-x 25 101
39222
Magnifying Glasses
TypeLens made of glass.
39223 101
Magnification Lens Ø 39223 …mm
3,5-x 62 10110-x 30 10215-x 21 103
39223 102 39223 103
39223
Magnifying Glasses
TypeBiconvex, glass lens. With plastic or wooden handle,metal frame.
39225 103d
39225 10139225 102
39225 104
39225 103
Magnification Dimensions Ø 39225 …approx. mm
2,0-x 100 x 50 1012,0-x 100 1023,5-x 100 1034,0-x 65 104
39225
Hand Magnifying Glass Tech-Line
dTypeWith very precise aplanatic glass optics.
39224 101
Magnification Lens Ø 39224 …mm
2-x / 4-x bifocal 90 / 20 1014-x 65 102
39224 102
39224
LED illuminated Magnifying Glass Tech-Line
dTypeSwivellable, exchangeable with a click. Withscratch-proof silicate glass lens. Housing solvent-re-sistant and scratch-proof coated. Bright LEDillumination with 6000K.
39221 101With aspherical lens, bifocal optics, biconvex.
39221 102-104Aplanatic optics.
39221 105Set of LED illuminated magnifying glasses Tech-Line MODULARTypeHandle with exchangeable magnifying glasses with 4-x, 10-x, and 15-x magnification. In carrying case.
Note:Spare handles with LED illumination with 4000Kbrightness for reflecting/polished surfaces and spareheads available on request. Spare batteries see cat.-no. 39990 404.
39221 101
39221 102-104
39221 105
Magnification Lens Ø 39221 …mm
2-x / 4-x bifocal 70,0 / 20,0 1018-x 30,0 102
10-x 30,0 10315-x 22,8 104
4-x / 10-x / 15-x set MODULAR 22,8 / 30,0 / 70,0 105
39221
eng/OP
• Illuminated Magnifying Glasses • Magnifying Goggles • Headband Magnifiers• Measuring Magnifying Glasses • Thread Counters
www.hhw.de39.14
3
LED illuminated Magnifying Glass Tech-Line
dTypeWith LED for illumination. Housing solvent-resistantand scratch-proof coated.
Note: Spare batteries see cat.-no. 39900 404.
39226
Magnification Lens Ø 39226 …mm
2-x / 4-x bifocal 70,0 / 20,0 1004-x 55,0 1018-x 30,0 103
10-x 22,8 10415-x 16,3 106
39226
Illuminated Magnifying Glasses
TypeBiconvex plastic lens, frame and handle made ofshockproofed plastics. Batteries not included.
39227 101TypePower supply 2 x 1,5 Volt Mignon batteries type LR 6, AA (cat.-no. 39900 403).
39227 102TypeLEDs included. Power supply 3 x 1,5 Volt Micro batteries type LR 03, AAA (cat.-no.39900 404).
39227 101
39227 102
39227
Magnification Lens Ø 39227 …mm
3-x 50 10110-x 30 102
Headband Magnifying Glasses
TypeUser-friendly thanks to adjustable headband withfastening tape. Weight only approx. 120 Gramm.Large viewing area, suitable for people wearingglasses. Hands-free. Lens 100 mm x 30 mm. 2.
Lens for higher magnification can be folded down.ApplicationFor reading, precision work, quality checks, etc.
39229
Magnification 39229 …
2,2-x - 3,3-x 101
39229
Binocular Headband Magnifiers
39230 Headband Magnifying GlassesTypeOptics made of silicate glass.Metal housing, whitevarnish, with fold-away prism holder. Attachment bymeans of an adjustable plastic-coated steel band.
Optics easily replaceable. Distance to the work-piece approx. 30 cm (1-x) up to approx. 11 cm (3-x).Suitable for people wearing glasses. Optics inclu-ded.
39232 Exchangeable optics Application For binocular headband magnifier
39230
Magnification 39230 … 39232 …
2,5-x 1012,0-x 1013,0-x 102
39230 - 39232
Magnification Working distance 39236 … 39237 …(Galilean system) approx. mm
MaxDetail 2-x 400 101MaxDetail clip 2-x 400 101
Magnifying Goggles MaxDetail and MaxDetail clip
l39236Magnifying goggles MaxDetailTypeVery lightweight, straight earpiece for comfortablefit. The included attachable earpiece ends preventsliding of the goggles. Also available for peoplewearing glasses, dioptre compensation of +/- 3 dptis possible. Large object field (approx. Ø 150 mm ata distance of 400 mm). In case.
ApplicationStress-reliefed and detailed vision at maximummobility.
39237Magnifying goggles MaxDetail clipTypeLarge object field (approx. Ø 150 mm at a distanceof 400 mm). ApplicationPeople wearing glasses can clip them to the glasses.
39236
39237
39236 - 39237
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.15
3
Binocular LED Headband Magnifying Glass Tech-Line
dBasis setTypeConsists of LED headband magnifying glass holderwith holder for exchangeable lenses of the mostcommon magnifications. Swivelling LED unit foradapting the illumation to the respective distance ofthe exchangeable optics used. Lightweight, robustmetal construction with folding function. Prismatic,silicate glass lens with metal frame. Suitable forspectacle-wearers. In storage case.
Note: Lens holders with LED illumination with furthermagnifications available on request. Spare batteries see cat.-no. 39990 404.
39228
Magnification 39228 …
2,0-x / 2,5-x / 3,0-x 101
39228
Measuring Magnifiers
TypeIlluminated, biconvex plastic lens. Frame andstand made of shockproofed plastics. Measuringplate, graduation 1 mm, scale length 60 mm and from 0 - 2.1/4. Type LR 6, AA power supply 4 x 1,5 Volt Mignon batteries. Batteries not included.
Note:Batteries see cat.-no. 39900 403.
39233
Magnification Lens Ø Height 39233 …mm approx. mm
3-x 89 133 101
39233
Measuring Magnifying Glass (thread counters)
TypeWith millimeter and inch scale.
39234
Magnification Lens Ø 39234 …mm
6-x 30 101
39234
Thread Counters
TypeAplanatic optic, silicate glass, optically ground.Brass, matt chrome finish.
39235 103dTypeSquare section, without scale.
39240TypeRound section with measuring scale, graduation 0,1mm, scale length 10 mm with 100 graduation marks.
39235
39240
Magnification Lens Ø Section Height 39235 … 39240 …mm mm mm
8-x 16,3 20 x 20 35 1038-x 16,3 Ø 20 35 101
39235 - 39240
Precision Measuring Magnifying Glasses
39245 101TypeAplanatic optic, silicate glass, optically ground.Frame and stand made of black plastics. Withmetal measuring scale, graduation 0,1 mm, scalelenght 15 mm with 150 graduation marks. Focusadjustment by revolving ocular.
39245 102TypeAplanatic optics, with lightweight lenses. Remova-ble measuring scale, graduation 0,1 mm, scalelenght 15 mm with 150 graduation marks. Framemade of black plastics, transparent, round baseØ 45mm.
39245 101
39245
39245 102
Magnification Lens Ø Height 39245 …mm approx. mm
8-x 23 45 10110-x 30 45 102
eng/OP
• Magnifying Glasses • Shop Microscopes • Measurement Microscopes • Illuminated Magnifying Glasses
www.hhw.de39.16
3
Table-top Magnifying Glasses and Dual Scales Tech-Line (single/sets)
d39246 301-304Table-top magnifying glasses, singleTypeWith aplanatic lens system, scratch-proof lensesmade of silicate glass. Housing made of impact-pro-of plastics, transparent. High contrast.
39246 303-304TypeWith Vario-Focus. Dioptre compensation up to +/- 4dpt especially for people wearing glasses.
39246 401-405Dual scale, singleTypeScales made of hard chrome, located on the bottomside of hard glass panes. Scratch-proof. 2 scales inone: macro scale (Ø 25 mm) and micro scale (Ø 2,5mm). Floating in a plastic ring to prevent scratches. ApplicationFor different measurements with table-top magnify-ing glasses Tech-Line.
39246 501Basic set of magnifying glasses with dual scaleType3-part, consists of measuring magnifing glass withVario-Focus and 8-x magnification and dual scale 1 (standard). In storage box.
39246 502Set of magnifying glasses for professionals withdual scaleType7-part, consists of measuring magnifying glass withVario-Focus and 8-x magnification and dual scale 1 (standard), dual scale 2 (polar net, angle, radius),dual scale 3 (angle), dual scale 4 (polar net), dualscale 5 (thickness ). In storage box.
39249 503Aluminium storage box for sets of magnifyingglasses, empty
Type Magnification Lens Ø Type 39246 …mm
Measuring magnifying glass (affixed) 8-x 30,0 – 301Measuring magnifying glass (affixed) 10-x 30,0 – 302
Measuring magnifying glass (vario) 8-x 22,8 – 303Measuring magnifying glass (vario) 10-x 22,8 – 304
Dual scale 1 - - standard 401Dual scale 2 - - polar net, angle, radius 402Dual scale 3 - - angle 403Dual scale 4 - - polar net 404Dual scale 5 - - thickness 405
Basic set of magnifying glasses 8-x 22,8 3-part 501Professional-grade set of magnifying glasses 8-x 22,8 7-part 502
Aluminium boy, empty – – – 503
39246
39246 40439246 403
39246 40239246 401
39246 30439246 303
39246 30239246 301
39246 405 39246 502
LED Illumination Unit Tech-Line
dTypeBright illumination with high contrast thanks to high-performance LED's. Direction of illumination canbe changed by turning the handle.
ApplicationFor Tech-Line table-top magnifying glasses (cat.-no.39246) and shop microscopes (cat.-no. 39300),when there is not enought light.
Note: Spare batteries see cat.-no. 39900 403.
39248
39248 …
101
39248
Shop Microscopes (Micro Loupes) Tech-Line
d39300 101TypeWith achromatic optics, focussing by means ofturning ring, with mirror, without scale. In case, withoperation manual.
39300 102TypeSimilar to cat.-no. 39300 101, but additionally withscale and 1 mm / 0,02 mm graduation.
39300 103Stand for shop microscopes Tech-Line.
39300 101-102
Magnification Length 39300 …mm
4050 60 -x 150 1014050 60 -x 150 102
Stand – 103
39300 103
39300
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.17
3
Measurement Microscopes
0TypeAchromatic lens system. Robust light metal housing,focussing by means of worm drive in ocular andobjective. Attached LED illumination (power supplyby means of 4 x button cells 1,5 V, type SR 44).
Scope of supply:Measuring microscope with LED illumination andbatteries in carrying case.ApplicationFor general measuring projects in length measuring,in graphic art, hardness measurement (Brinell andVickers).
Note:Spare batteries see cat.-no. 39900 101.
39249
Magnification Object field Ø Measuring range Scale division Object distance 39249 …mm mm mm mm
20-x 8,0 7 0,05 57 10140-x 5,0 4 0,02 36 10260-x 2,5 2 0,0125 26 103
39249
Measurement Microscopes
39247 101Model XC-100LTypeMagnification 100-x, ocular 10-x with reticule 0,01mm, objective 10-x. Robust housing with smoothrack and pinion drive, top-light by means of integra-ted battery.
Note:Spare batteries see cat.-no. 39900 404.
39247 201Objective 40-xApplicationFor 40-x magnification, scale interval 0,025 mm.
39247 101
Type 39247 …
Microscope XC-100L 101Objective 40-x 201
39247
Gooseneck Magnifying Glasses Tech-Line
d39250 201-202TypeAplanatic optics for a distortion-free picture all theway to the edge, anti-fog. With base made of solidcast iron with black plastic coating. Flexible metal
gooseneck, length 300 mm.
39250 201TypeWith bifocal optics.
39250 201
Magnification Lens Ø 39250 …mm
2-x / 4-x bifocal 90 / 20 2014-x 65 202
39250 202
39250
Magnification Lens Ø 39251 …mm
Magnifying lamp 2-x 132 101Additional lens 3-x - 102Lens protector - - 103
Magnifying Lamp Vario LED with LED Ring Illumination
l39251 101TypeAspherical lightweight lens for distortion-free picture upto the very edge. Surface hard-coated with ceratec®
and PXM®. Optimum positioning of the magnifier headis guaranteed by 6 articulated joints. Attachment bymeans of table clamp. Swivelling and removable lenscap. Power supply 100 V-240 V, 50-60 Hz.- Quick change between normal view and magnified
view thanks to the free-floating lens- New ring illumination design with 36 high-quality
LEDs for shadow-free viewing- LEDs with primary lens system for perfect concen-
tration of light- LEDs brightness individually adjustable: perfect
illumination for every use- Ergonomically designed- Light-weight magnifier head- Swivelling range of the magnifier head 180°
Note:Additional lens and lens protector see cat.-no.39251 102-103.
39251 102Additional lensType3-x magnification.ApplicationFor magnifying lamp Vario LED, cat.-no. 39251 101.
39251 103Lens protectorApplicationFor magnifying lamp Vario LED, cat.-no. 39251 101.
39251 101
39251 103
39251
eng/OP
• Illuminated Magnifying Glasses • Endoscopes
www.hhw.de39.18
3
. KARL STORZ GMBH & CO. KG: Experts in Endoscopy – for more than 60 Years
Endoscopes and instruments made by KARL STORZ not only signify innovation in technology, they are also used world-wide in everyday work and always prove their unique characteristics:
● unsurpassed design in the area of precision technology ● unsurpassed functionality thanks to the use of high-quality materials● components which correspond to the latest technology and can be integrated in all upcoming endoscopy systems● modular design ensures easy handling
The product range of KARL STORZ consists of more than 200 different optics as well as instruments accessories for endoscopyin the industry:● Focusing borescopes from 1,0 - 10 mm Ø
in lengths from 100 - 1780 mm, lines of sight 0° - 120°
● Focusing flexible endoscopesfrom 0,5 - 12 mm Ø in lengths from 350 - 1800 mm
● Digital and analogue documentation instruments for storing and processing of pictures obtained by means of endoscopy
● Cold light projectors for perfect illumination of the areas to be examined.
We excel in customising the endoscopic equipment of our customers with respect to their individual wishes and requirements. Our servicepersonnel will assist you with all your problems and issues when it comes to endoscopy in the technical field.
0° 30° 45° 70° 90° 120°
Lines of sight of the KARL STORZ borescopes:
Y
Precision Illuminated Magnifying Glasses (VDE-Tested)
ApplicationFor bright and shadow-free illumination of objecti-ves.
39255Precision Illuminated MagnifiersTypeWith heavy, round table stand, Ø 180 mm, plastic-coated. Bright illumination through movable loupeplate made of diecasting aluminium, plastic-coated.Lens: 4 dptr., glass, biconvex/ 100 mm. Flexibleadjustment of the lens arm by means of plastic-co-vered metal hose. Height 200 mm, working radius350 mm. With 1,25 m cable, cable switch, two-pinplug and 2 light bulbs @ 25 W, 230 V.
39257Precision Illuminated MagnifiersTypeWide radius of action thanks to strong spring-jointedarm made of steel square tubing and table clamp forfastening to tabletop and wall. Bright illumination
through movable loupe plate made of diecastingaluminium, plastic-coated. 4 dptr., glass, bicon-vex/100 mm. Height 800 mm, working radius 1.100mm. With 1,25 m cable, cable switch, two-pinplug and 2 light bulbs 25 W, 230 V.
39259 - 39261dLED illuminated magnifying glass Tech-LineTypeScratch-proof, solvent-resistant lenses made ofsilicate glass. 2 lacquered aluminium arms withadjustable plastic joints and spring-type compensati-on device. LED illumination for a bright illuminationwith high contrast of the object. With cable andtable clamp (clamping capacity approx. 18-74 m).
39255
d d
Magnification lens Ø 39255 … 39257 … 39259 … 39261 …mm
2-x 100 101 1012-x / 4-x bifocal 120 201
1,75-x 202 201
39257
39259 39261
39255 - 39261
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.19
3
Flexible Endoscopes optical/electronical
39303 301-304Flexible endoscopesType Robust ABS-housing. Halogen lamp for perfectillumination. One-hand operation for illumination andfocusing. Batteries (2x AA Mignon 1,5 V), halogenbulb included. Application Simple and time-saving diagnoses in maintenanceand repair. For visual checks in hard-to-reach placeswithout complicated preparations or dismantling.
Note: Spare batteries see cat.-no. 39900 403.
39303 301-302Optical endoscopesType Waterproof high-performance lens, suitable for theuse in liquids.
39303 303-304Electronic endoscopesTypeFor the connection with a PC or laptop via USB.Autofocus, candle power adjustable with a button onthe handle. Windows® software for transmission ofthe pictures and movies included.
39303 305-306Attachable mirrorsApplication For quick servicing, e.g. complete service of heatexchangers.
39303 305Attachable 45° mirror for endoscopes IGS Ø 4 mm,cat.-no. 39303 301-302.
39303 306Attachable 45° mirror for electronic endoscopesVIGS, cat.-no. 39303 303-304.
39303 307Spare halogen bulb.
39303 303-304
39303 301-302
39303 305-306 39303 307
Type Probe length Probe Ø Viewing area Ambient temperature Weight 39303 …mm mm degrees °C approx. g
IGS 4018 457 4 40 -20…+125 227 301IGS 4036 914 4 40 -20…+125 318 302
VIGS 1018 457 10 40 -20…+125 227 303VIGS 1036 914 10 40 -20…+125 318 304
45° mirror Ø 4 mm – – – – – 30545° mirror Ø 10 mm – – – – – 306
Spare bulb – – – – – 307
39303
Flexible Endoscopes TESTO 319-1
.39301 101TESTO 319-1 SetTypeRobust, ergonomically shaped and easy to use.Excellent optics (6.000 pixels), viewing area of 50°.The lamp illuminates the complete viewing area.Service life of the illumination: approx. 50.000 h.Lens and pipe are waterproof and can, for a shorttime, be used even in oil and petrol.Scope of supply:TESTO 319-1, gooseneck pipe, magnet attachment,mirror attachment, bag.
Note:Spare batteries see cat.-no. 39900 403.
39301 102TESTO 319-1 single
39301 103Flexible gooseneck pipeApplicationFor areas in which medium flexibility is required.
39301 105Mirror attachment, offset 45°.
39301 106Bag for basic set, cat.-no. 39301 101.
39301 101
Type Probe length Probe Ø Viewing area min. Distance of focus max. Bending radius Number of pixels Dimensions handle Weight 39301 …mm mm degrees mm mm mm approx. g
TESTO 319-1 Set 1247 +/-6 6,5 45 +/- 5 15 50 6.000 320 x 180 x 40 400 101TESTO 319-1 1247 +/-6 6,5 45 +/- 5 15 50 6.000 320 x 180 x 40 400 102
Gooseneck pipe – – – – – – 260 x 250 x 30 240 103Mirror attachment – – – – – – 110 x 90 x 25 15 105
Bag – – – – – – – – 106
39301
eng/OP
• Endoscopes • Sound Detection Devices
www.hhw.de39.20
3
Cold Light Endoscopes
VType4 x as bright as standard endoscopes thanks toxenon halogen lamp, no heat at the telescopicprobe. Anti-fog, waterproof endoscopic probe. Short-term usage even in oil and petrol. Infinitely adjusta-ble focusing of the ocular for perfect images (bluesetting ring). Minimum bending radius (30 mm) forhard-to-reach places, e.g. bends in pipes and hoses.Especially tempered achromatic optics for imageswithout colour fringes. On/off-switch with infinitelyadjustable illumination control. Quick attachment ofthe battery handle to the basic unit thanks topatented bayonet joint. Operating temperature -20 -+55°C. Eyepiece cup for people wearing glasses.Optional screw-on lateral view adapter 90°and/or 110°. Outside diameters will not be influen-ced by the optional adapters. Minimum workingdistance 5 and/or 10 mm. Mobile usage thanks tobattery handle with 3 standard dry-cell battery (up to10 h of operating time).ApplicationFor quick diagnostics without elaborate disassemblyin the industry, aviation, construction, automobile,lorry, motorbike, and marine industry.At-onceassessment of project size. Specific procurement ofspare parts before the repair.
Note: Spare batteries see cat.-no. 39900 402.
39307 101Endoscope, probe diameter 4,2 mmTypeOutside diameter 4,2 mm. Reduced torsion torquefor an easy rotation of 360° around the longitudinalaxis. 17.000 glass fibres ensure perfect resolution.Optimisation of focal distance for close viewing(starting at 5 mm). Large opening angle (40°) forgood overview. Brightness up to 15.000 Lux at adistance of 16 mm. Usable length 720 mm, flexible. Scope of supply: Endoscope, battery handle with 3 batteries (Baby,LR 14), eyepiece cup for people wearing glasses,carrying case with foam insert.
39307 102110° mirror (lateral view adapter)ApplicationFor endoscope Ø 4,2 mm (cat.-no. 39307 101). Foran increase of the viewing area to 110° openingangle.
39307 10390° mirror (lateral view adapter)ApplicationFor endoscope Ø 4,2 mm (cat.-no. 39307 101). Foran increase of the viewing area to 90° openingangle.
39307 201Endoscope, probe diameter 6,0 mmTypeAll-around viewing area thanks to rotatable endos-cope . High-resolution conducter with more than7.000 fibres, 50.000 Lux. Minimum working distance10 mm. Large opening angle (50°) for goodoverview. Brightness up to 50.000 Lux at adistance of 16 mm. Usable length 1.000 mm,flexible. Scope of supply: Endoscope, battery handle with 3 batteries (Baby,LR 14), eyepiece cup for people wearing glasses,carrying case with foam insert.
39307 202110° mirror (lateral view adapter)ApplicationFor endoscope Ø 6,0 mm (cat.-no. 39307 201). Foran increase of the viewing area to 110° openingangle.
39307 20390° mirror (lateral view adapter)ApplicationFor endoscope Ø 6,0 mm (cat.-no. 39307 201). Foran increase of the viewing area to 90° openingangle.
39307 101
Type 39307 … 39307 …
Endoscope Ø 4,2 mm 101110° mirror 10290° mirror 103
Endoscope Ø 6,0 mm 201110° mirror 20290° mirror 203
39307
Technical specificationsCat.-no.: 39307 101 39307 201Type: Endoscope Ø 4,2 mm Endoscope Ø 6,0 mm
. Diameter: 4,2 mm 6,0 mm
. Working distance min.: 5,0 mm 10,0 mm
. Brightness at a distance of 16 mm: 15.000 Lux 50.000 Lux
. Minimum bending radius: 30 mm 30 mm
. Usable length: 720 mm 1.000 mm
. Opening angle: 40° 50°
. Operating temperature: -20° - +55°C -20° - +55°C
. Illuminant/lamp: 3,5 V 3,5 V
. Special features: reduced torsion torque, rotating 360° -
39307 201
39307 10339307 102
39307 20339307 202
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.21
3
Type Weight 39317 …approx. kg
Endoscope SeeSnake micro® 0,5 101Cable extension 90 cm - 102
Camera head - 103Set of accessories 3-part - 104
Flexible electronic Endoscope SeeSnake micro®39317
j39317 101TypeEndoscope with camera Ø 17 mm and 2 adjusta-ble LED lamps. With 2,5 inch LC-display (resoluti-on 160 x 234 pixel) with control panel.Connection forvideo and data cable for external image storage.Aluminium camera head. Semi-flexible 90 cm cable,can be extended to 9 m with accessories, water-proof up to 3 m. Included are hook, magnet andmirror attachments, which are simply attached tothe camera head and increase the applicationrange. Incl. of 3-part set of accessories, data cableand 4 batteries, in carrying case.ApplicationFor inspecting and solving problems behind andinside of objects, walls, cables, lines, and otherhard-to-reach places.
Note:Spare batteries see cat.-no. 39900 403. Camera head Ø 9,5 mm for attachment to SeeSna-ke (cat.-no. 39317 101) see cat.-no. 39318 102. Cable extension 180 cm for SeeSnake (cat.-no.39317 101) see cat.-no. 39318 103.
39317 102Cable extension 90 cm for SeeSnake (cat.-no.39317 101).
39317 103Spare camera head with cable 90 cm for SeeSna-ke (cat.-no. 39317 101).
39317 1043-part accessory set: mirror, hook, and magnetattachment for SeeSnake (cat.-no. 39317 101).
39317
Flexible electronic Endoscope SeeSnake microEXPLORER
j39318 101TypeEndoscope with camera with self-levellingfunctione Ø 17 mm and 4 adjustable LEDlamps.With 3,5 inch LC-display (resolution 320 x240 pixel). Semi-flexible 90 cm cable, can beextended to 9 m with accessories, waterproof up to3 m. Included are hook, magnet and mirrorattachments, which are simply attached to thecamera head and increase the application range.SD-card slot and audio recording as an option. Incl.of 3-part set of accessories, Li-Ion rechargeablebattery with battery charger and USB cable, incarrying case.ApplicationFor inspecting and solving problems behind andinside of objects, walls, cables, lines, and otherhard-to-reach places.
39318 102Camera head Ø 9,5 mm for SeeSnake andSeeSnake microEXPLORER (cat.-no. 39317 101and 39318 101).
39318 103Cable extension 180 cm for SeeSnake andSeeSnake microEXPLORER (cat.-no. 39317 101and 39318 101).
39318 1043-part accessory set: mirror, hook, and magnetattachment for SeeSnake microEXPLORER(cat.-no. 39318 101).
39318 101
39318 102 39318 103
Type Weight 39318 …approx. kg
Endoscope SeeSnake microEXPLORER 0,8 101Camera head Ø 9,5 mm - 102Cable extension 180 cm - 103
Set of accessories 3-part - 104
39318
Sound Detection Devices
,TypeProbe tip made of steel, handle and noise cablesmade of plastics.ApplicationFor detecting and determining mechanical damageto all apparatus and devices with moving parts.Even hard-to-reach places can easily be reached.
88060 …
101
88060
88060 101
Performance requires quality.www.atorn.com
Swivel bases by ATORN:
ATORN‘s high-quality turning tools.
eng/OP
• Microscopes
www.hhw.de39.22
3
. Centring Microscopes and Projectors
The microscopes are of high-precision, perfect optical and mechanical quality as well as sidewise correct monitoring. All microscopes are supplied accurately centred.
Centring and Positioning ProjectorsFor use on measuring machines and machine tools. The projector can be fitted with a bevel protractor.
Small projectorLess than, simple projector. Screen Ø 80 mm, Ø of the ground tube 25-h5 (if desired 30-h5)
Please contact us!
Technical specifications:
Magnification 10-x 15-x 20-x 25-x 30-x 40-x 50-x 60-x 75-x 100-xVisual field Ø 13,8 9,2 6,9 5,5 4,6 3,4 2,7 2,3 1,8 1,3
Working rangeMA 112-2 185 145 105 80 65 50 40 – 25 15MA 113 260 160 115 90 80 60 50 45 35 28MA 116 225 155 115 95 80 60 45 40 30 20MA 117 SZ-3 95 50 60 50 25 – – – – –MA 121 165 120 90 65 60 45 35 30 20 115
39304 101Model ST 40-2LTypeMagnification 20-x and 40-x (up to 80-x possible),image area D=10 mm and 5 mm, prism head with45° looking angle, swivellable 360°. Eye base canbe adjusted from 51 to 75 mm. Ocular tube withdioptre compensation, oculars WF 10-x witheyecups, object holder revolver with objectives 2-xand 4-x.Toplight and through-light illumination 12 V / 10 W,working range 55 mm, max. object height 45 mm.Glass plate and plastic base black/white, tripod withcolumn and smooth rack and pinion drive on bothsides.
39304 201Ocular WF 15-x
39304 202Ocular WF 20-x
39304 203Ocular WF 10-x (1 ea.)TypeWith reticule, scale interval 0,05/0,025 mm.
Type Magnification 39304 …
Microscope ST 40-2L 20 - 40-x 101Ocular WF 10-x 203Ocular WF 15-x 201Ocular WF 20-x 202
Stereo Microscopes ST 40-2L39304
39304
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.23
3
Type Magnification 39313 … 39314 …
Ocular WF 15 / 13-x 101Ocular WF 20 / 15-x 102Ocular WF 10-x 103Front lens 0,5-x 104Front lens 2,0-x 105
CCD camera adapter (s-mount) – 106LED ring light – 201
Ring light adapter – 102
Accessories for Stereo Zoom Microscopes SZM
39314 201
39313 - 39314
Stereo Zoom Microscope LAB 2
TypeMagnification infinitely adjustable from 10-x-40-x.image area 20 mm - 5 mm. Eye base adjustablefrom 51 mm - 75 mm. Ocular tube: prism head 45°,looking angle rotatable by 360°, with dioptrecompensation. Oculars: WF 10-x - 20 mm witheyecups. Objective 1-x - 4-x. Illumination: halogentop-light and through-light 12 V / 10 W.ApplicationFor use in industry, for assembly and testing works,in laboratories, and most suitable for research andeducation.
Note:Further models and accessories available onrequest.
39315
39315 …
201
39315
39305 … 39310 … 39311 … 39312 …
201 201 201 201
Stereo-Zoom Microscopes SZM 1, 2, 3 and 439305 - 39312
39305Model SZM 1TypeMagnification 7-x up to 45-x (180x possible), imagearea D=28 mm...5 mm, binocular prism head with45° looking angle, swivellable 360°. Eye base canbe adjusted from 51 to 75 mm. Ocular tube withdioptre compensation, oculars WF10x with eyecups,adjustable halogene top-light and through-lightillumination 12V, 15W. Working range 105 mm, max.object height 75 mm. Glass plate and plastic baseblack/white, tripod 26x20x6 cm with column D=30mm and smooth rack and pinion drive on both sides.
39310 Model SZM 2 Type Similar to cat.-no. 39305, but with trinocular prismhead.The trinocular output allows photografic andvideo technical pictorial documentation.
39311 Model SZM 3 Type Similar to cat.-no. 39305, but without illumination.Overall height 48 cm, base plate Ø 25 cm, overhang45 cm.
39312 Model SZM 4 Type Similar to cat.-no. 39305, but with trinocular prismhead. Without illumination, overall height 45 cm,base plate Ø 25 cm, overhang 45 cm.
Note:Accessories see cat.-no. 39313 - 39314.
39310
39312
39305
eng/OP
• Magnifying Lamp • Observation Devices
www.hhw.de39.24
3
Illumination for Stereo Zoom Microscopes
39316 101Cold light sourceTypePowerful, electronically controlled, therefore 30%higher yield. Even illumination. Sturdy, ergonomical-ly-shaped housing with filter connection on the side.Brightness Mlx 8, output 30 W, power input 50 VA/240 V.
39316 102Gooseneck light conductorTypeFlexible, Ø 3 mm, length 500 mm.ApplicationFor use with the cold light source.
39316 103Fluorescent ring lightTypeØ 66 mm.ApplicationFor even illumination of workpieces.
39316 101
Type 39316 …
Cold-light source 101Light conductor 102
Ring light 103
39316 102
39316 103
39316
Magnifying Lamp LENTIS®
NTypeThe magnifying lamp LENTIS fulfil the hardestoptical, ergonomical and mechanical requirements.The multi-layer anti-reflection coating of the lensallows for distortion-free images (even near theedges). 2,5 dioptre lens ensures perfect magnificati-on, long working distance and a large view section.Bright fluorescent tube with long service life for crispillumination and natural images. Quick assembly,high stability and flexibility thanks to swivelling basewith ball joint.ApplicationFor inspection, manipulation, and rework of smallcomponents.
39319
Type 39319 …
LENTIS® 101
39319
Technical specificationsCat.-no.: 39319 101Type: LENTIS®
Optics. Observation lens: 2,5 dioptres. Working distance: 80 - 250 mm. View section: 250 mm
Illumination. Illuminant: 2 x 4 W. Brightness (on object): 1.700 Lux. Operating time: approx. 2.000 h
Mechanics. Overall height: 290 - 540 mm. Range: 460 - 640 mm. Swivelling range: 80° - 160°. Observation angle: 65° - 20°. Weight (head and base): 4,0 kg. Power supply: external 9 V DC mains adapter
(included)
LENTIS® is patented and a registered trade mark of Vision Engineering Ltd.
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.25
3
Observation Devices MANTIS® Compact and Compact TS
N39320TypeMagnification is clear, distortion-free, 3D, correct incolour and position. Non-tiring operation thanks todisplay. Illumination: 9400 LUX, service life of thelamp approx. 10.000 hours. Compact, ergonomicaldesign. Improved focus and enlarged view section. 2-x, 4-x and 6-x magnification, Compact projectionhead.
39320 101MANTIS® Compact. Universal base with table mount option, mainsadapter and dust protection cover. Objectives notincluded.
39320 102MANTIS® Compact TS. Table stand additionally with LED through-light (1200 - 4000 LUX). Objectives not included.
39321Screw-in interchangeable lenses for cat.-no. 39320 101 and 39320 102.
39322Protective glass for objectives cat.-no. 39321. Pack = 4 pcs.
39320 101
Observation devicesType 39320 …
MANTIS® Compact 101MANTIS® Compact TS 102
ObjectivesType Magnification Working distance View section 39321 …
mm Ø mmMCO-002 2-x 250 55,0 100MCO-004 4-x 96 27,5 101MCO-006 6-x 73 19,2 102
Protective lensesType Pack = pcs. 39322 …
MCO-010 4 101MANTIS® is patented and a registered trade mark of Vision Engineering Ltd.
39320 102
39321 100 39321 101 39322 10139321 102
39320 - 39322
Sliding table for MANTIS® Compact TS and Elite TS
NApplicationFor MANTIS® observation devices with table standtype Compact TS (cat.-no. 39320 102) and typeElite TS (cat.-no. 39330 202).
39333 101
Size 39333 …mm
100 x 100 101MANTIS® is patented and a registered trade mark of Vision Engineering Ltd.
39333
eng/OP
• Observation Devices • Measurement Microscopes
www.hhw.de39.26
3
Observation Devices MANTIS® Elite and Elite TS
N39330TypeMagnification is clear, distortion-free, 3D, correct incolour and position. Excellent optical performance.Non-tiring operation thanks to display. Illumination:11.000 LUX, service life of the lamp approx. 10.000hours. Compact, ergonomical design. Improvedfocus and enlarged view section. 2-x - 20-x magnifi-cation, Elite projection head with Quick-Changeobjective changer for 2 objectives.
39330 201MANTIS® EliteUniversal base with table mount option, mainsadapter and dust protection cover. Objectives notincluded.
39330 202MANTIS® Elite TS.Table stand additionally with LED through-light(1200 - 4000 LUX). Objectives not included.
39331Screw-in interchangeable lenses for cat.-no.39330 201 and 39330 202.
39332Protective glass for objectives cat.-no. 39331.
39330 201
Observation devicesType A B C max D E 39330 …
mm mm mm mm mmMANTIS® Elite 593 - 802 352 - 622 212 83 - 292 415 - 624 201
MANTIS® Elite TS 487 198 305 – 538 - 653 202
ObjectivesType Magnification Working distance View section Ø 39331 …
mm mmMEO-002 2-x 250 68,0 200MEO-004 4-x 96 34,0 201MEO-006 6-x 68 23,0 202
MEO-006SL 6-x 112 23,0 207MEO-008 8-x 59 17,0 203MEO-010 10-x 54 13,5 204MEO-015 15-x 40 8,8 205MEO-020 20-x 29 6,5 206
Protective lensesType Suitable for objectives type Pack = pcs. 39332 …
MEO-025 MEO-004, MEO-008, MEO-010 4 101MEO-026 MEO-006 4 102MEO-027 MEO-006SL 1 103
MANTIS® is patented and a registered trade mark of Vision Engineering Ltd.
39330 202
39331 201
39331 202
BF
A
D
E
C
39331 203 39331 20439331 205
39330 - 39332
39332 10339332 101-102
39331 206
39331 207
. I Measuring Microscope TCM 200
- Modular design - Customised microscope configurations for optical length
measurements and viewings of pictures for metallurgicaltests.
- Telecentrical interchangeable lenses of highest opticalquality
- Perfect object illumination - Roller bearing-guided measuring tables with measuring
ranges of 150 x 100 mm and 250 x 150 mm - Optoelectronical measuring systems with incrementally
graduated steel measuring rods - Computer-aided measured value processing - Digital output RS 232 - With calibration certificate- Measuring of lengths, contact and measuring force free
in 1, 2 and 3 direction of coordinates- 0,0005 mm and/or 0.00002 in digital indication- High-precision measuring thanks to very small error
tolerances, e.g. only 2,6 µm at 150 mm measuring length- High permitted table load and large free setting ranges
of distance for large testing workpieces- Surface inspections with brillant illustrations and
magnifications up to 1000-x
- Video camera connection for post-processing
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP
3
Measurement Microscopes WMS
39365 101-102Measurement Microscopes WMSTypeWith halogene illumination. Ocular 10-x, objective32-x, optional: zoom 8-x - 40-x. Halogene throughand top-light 12V, 10 W. Max. workpiece height 180mm, max. table load 20 kg.
39365 201Geometrical measurement calculator QC-200TypeLarge LC-display capable of displaying graphics,with background illumination. Easy operation due tofunction keys.ApplicationFor the calculation of geometrical elements.
39365 202CCD camera 1/2 inchTypeWith C-mount connection, incl. of mains adapter.Outlet F-BAS/S-VHS, 470.000 pixels, Pal videosignal.
39365 203Software VideoMessApplicationFor displaying and calculating pictures on a compu-ter monitor in both live and freeze image mode.
39365 204-205TV adapterApplicationFor connecting a TV.
39365 102
Type Magnification 39365 …
Microscope WMS 32-x 101Microscope WMS 8 - 40-x 102
Measurement calculator – 201CCD camera – 202
Software VideoMess – 203TV adapter 0,4 – 204TV adapter 1,0 – 205
39365 201 39365 202 39365 203
39365
www.hhw.de 39.27
eng/OP
• Projectors
www.hhw.de39.28
3
Accessories for Projector HP 300 + HP 360 H + HP 600
Note:Further accessories available on request. Pleaseask for our special catalogue or contact our techni-cal team.
39371 1062-Axis digital displayFor x and y, algebraic signs + and -, flying referencepoint, direct and relative measurement for x and y.Display sequence 0,001 mm, interface V 24/RS232.
39371 108Measurement calculator QC 220Digital LC-display, with geometrical measurementprogram. 2-axes geometry software for alignmentand for measuring points, straights, circles, andangles and their links, direct and incrementalmeasuring, display of imperial and metric units,tolerance input and many other functions. 1 serialinterface for PC, 1 parallel interface for printer.
39371 109 Measurement calculator QC 220 E Digital LC-display with photometric measurementinstrument (determination of reading point by meansof light/dark detection for through-light procedure)and geometrical measurement program. 2-axesgeometry software for alignment and for measuringpoints, straights, circles, and angles and their links,direct and incremental measuring, display ofimperial and metric units, tolerance input and manyother functions. 1 serial interface for PC, 1 parallelinterface for printer.
39371 106
39371 108
Type 39371 …
2-Axis digital display 106Measurement calculator QC 220 108
Measurement calculator QC 220 E 109
39371
Projectors HP 300
ßTypeThe precise and reliable measuring result: just threesteps with the HP 300 H.- mount workpiece, - focus, - measure.This is only possible thanks to:- high-precision components and and extremely
sturdy design,- extraordinary measuring optics, - clear and bright through-light and top-light images
with high contrast.Basic equipment- 300 mm screen with cross hairs,- gauging fixture,- bevel protractors rotatable 360°, graduation 1°,
vernier 1 min.,
- measuring range 200 x 100 mm, - tabletop dimensions 420 x 240 mm with T-slots, - needle-bearing X, Y and Z-axis, - measuring rods with a resolution of 0,001 mm, - deflection mirror for top-light, - through-light and top-light with 1 ea. 150 W
halogen lamps with cold light filter.Optional- objective 10-x (cat.-no. 39386 101), - objective 20-x (cat.-no. 39386 102), - objective 50-x (cat.-no. 39386 103), - objective 100-x (cat.-no. 39386 104), - 2-axis digital display - geometrical measurement calculator Multicount
200, - geometrical measurement calculator Multicount
200 with edge sensor see cat.-no. 39371.
Note:Objectives see cat.-no. 39386. Other optionsavailable on request.
39380 101
39380 …
101
39380
Technical specifications HP 300. Screen Ø 300 mm. Magnifications 10-x 20-x 50-x 100-x as an option. Image area 30/ 15/ 6/ 3 mm. Working distance 115/ 105 / 53 / 45 mm. max. Error 0,1‰. Accuracy of projection through-light: 0,1%
Top-light: 0,15%. Objectives Telecentrical objectives. Objective mount single mount. max. Workpiece Ø 200 mm. Sliding table: measuring range 200 mm X - 100 mm Y. Contact surface 420 x 240 mm. max. Table load 20 kg. Illumination through-light and top-light 24 V 150 W halogen,
both fan cooled, cold light filter. Dimensions W x D x H 520 x 970 x 1170. Weight 230 kg. Rating 220 - 240 VAC, 50 - 60 Hz. Power input max. 1,0 kW
Performance requires quality.www.atorn.com
Digital slide callipers by ATORN:
ATORN‘s high-quality measuring tools.
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.29
3
Horizontal Projectors HP 360 H
ßTypeThe precise and reliable measuring result: just threesteps with the HP 360 H.- mount workpiece, - focus, - measure.This is only possible thanks to:- high-precision components and and extremely
sturdy design,- extraordinary measuring optics, - clear and bright through-light and top-light images
with high contrast.Basic equipment- 360 mm screen with cross hairs,- Gauging fixture,- Bevel protractors rotatable 360°, graduation 1°,
vernier 1 min.,- Measuring range 250 x 150 mm, - Tabletop dimensions 500 x 135 mm with T-slots, - Needle-bearing X, Y and Z-axis, - Measuring rods with a resolution of 0,001 mm, - Deflection mirror for top-light, - Through and top-light with 1 ea. 150 W halogen
lamps with cold light filter.
Optional- Objective 10-x (cat.-no. 39386 101),- Objective 20-x (cat.-no. 39386 102),- Objective 50-x (cat.-no. 39386 103),- Objective 100-x (cat.-no. 39386 104,)- 2-Axis digital display - geometrical measurement calculator Multicount
200, - geometrical measurement calculator Multicount
200 with edge sensor see cat.-no. 39371.
Note:Objectives see cat.-no. 39386. Other optionsavailable on request.
39385 101
39385 …
101
39385
Technical specifications HP 360 H. Screen Ø 360 mm. Magnifications 10-x 20-x 50-x 100-x as an option. Image area 36/ 18/ 7,2/ 3,6 mm. Working distance 115/ 105/ 53/ 45 mm. max. Error 0,1‰. Accuracy of projection through-light: 0,1%
Top-light: 0,15%. Telecentrical objectives. Objective mount single mount. max. Workpiece Ø 300 mm. Sliding table: measuring range 250 mm X - 150 mm Y. Contact surface 500 x 135 mm. max. Table load 50 kg. Illumination
. Dimensions W x D x H 650 x 1250 x 1110
. Weight 280 kg
. Rating 220 - 240 VAC, 50 - 60 Hz
. Power input max. 1,0 kW
Objectives for projectors HP 300 + HP 360 H
39386 101-104ObjectivesApplicationFor projector HP 300 and HP 360 H (cat.-no. 39380-39385).
Note:Further accessories available on request. Pleaseask for our special catalogue or contact our techni-cal team.
Objectives/magnification 39386 …
10-x 10120-x 10250-x 103
100-x 104
39386
eng/OP
• Projectors
www.hhw.de39.30
3
Projectors HP 600
ßTypeThe precise and reliable measuring result: just threesteps with the HP 600.- mount workpiece, - focus, - measure.
This is only possible thanks to:- high-precision components and and extremely
sturdy design,- extraordinary measuring optics, - clear and bright through-light and top-light images
with high contrast.
Basic equipment- 600 mm screen with cross hairs,- Ggauging fixture,- Bevel protractors rotatable 360°, graduation 1°,
vernier 1 min.,- Measuring range 250 x 325 mm, - Tabletop dimensions 520 x 325 mm with T-slots, - Needle-bearing X, Y and Z-axis, - Measuring rods with a resolution of 0,001 mm, - Deflection mirror for top-light, - Through and top-light with 1 ea. 150 W halogen
lamps with cold light filter.
Optional- Objective 10-x (cat.-no. 39391 102)- Objective 20-x (cat.-no. 39391 103)- Objective 50-x (cat.-no. 39391 104)- Objective 100-x (cat.-no. 39391 105)- 2-Axis digital display - geometrical measurement calculator Multicount
200, - geometrical measurement calculator Multicount
200 with edge sensor see cat.-no. 39371.
Note:Accessories see cat.-no. 39391. Other options available on request.
39390
39390 …
101
39390
Technical specifications HP 600. Magnification 5x 10x 20x 50x 100x. Image area mm 120 x 60 x 30 x 12 x 6. Working distance mm 258 / 134 / 128 / 90 / 45. Screen diameter mm 600. Accuracy of projection 0,08 % (through-light), 0,10 % (top-light). Error max. 0,02 %. Workpiece weight on glass plate max. kg 20. Tabletop mm 520 x 325. Weight kg 450. Rating 220 - 240 V 50 - 60 Hz. Power input max. kW 1,0
Accessories for Projector HP 600
Objectives/magnification 39391 …
10-x 10220-x 10350-x 104
100-x 105Dark chamber facility 106
39391
39394 …Type
TESA-SCOPE II 300V 101
Projector TESA-SCOPE II 300 V39394
(TypeProjector with vertical beam direction. Rotatablescreen made of ground glass, turning range 360°, Ø300 mm. Cross hairs 30°, 60° and 90° with 4 foilclips. Screen rotation with sexagesimal and decimaldisplay, resolution in minutes - RAZ ABS/INC.Through-light illumination with green filter for imageswith high contrast and easy and safe measuring.Top-light with rotatable optical fibres for perfectillumination. Save-Lamp-System - automatic shut-offof the lamps a few minutes after use. Bayonetmount for a quick exchange of the measuringobjectives. Coordinate measuring tables withincrementally graduated glass scales, optoelectro-nic. Resolution 0,001 mm. Measuring range 200 x100 mm. Released, free movements of the table inthe direction of coordinates X and Y (manualversion). Right-hand and left-hand operation indirection X. Maximum table load 10 kg, without
interfering with the accuracy. With lateral copyholder, TESA calibration certificate and declarationof conformity. Protection rating IP 40. Weightapprox. 110 kg.ApplicationEspecially suitable for measuring flat workpiecesand other workpieces in precision mechanics.
Note:Objectives not included. Objectives see cat.-no.39396. Further types available on request.
Note:Further accessories available on request. Pleaseask for our special catalogue or contact our techni-cal team.
ApplicationFor projector HP 600 (cat.-no. 39390).
39391 102-105Objectives
39391 106Dark chamber facilityincl. curtain
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.31
3
ProjectorType 39395 …
TESA-SCOPE II 355H 101
ObjectivesMagnification Object field Working distance (W) Height (H) Q (D) Length of objective (C) Max. width of 39396 …
mm mm max. mm max. mm mm test specimen X=Y-(W+C) mm10-x 35,0 80 100 200 37 165 10120-x 17,5 82 100 200 35 165 10250-x 7,0 53 100 200 64 165 103
Projector TESA-SCOPE II 355 H39395 - 39396
(39395TESA-SCOPE II 355HTypeProjector with horizontal beam direction. Rotatablescreen made of ground glass, turning range 360°, Ø300 mm. Cross hairs 30°, 60° and 90° with 4 foilclips. Screen rotation with sexagesimal and decimaldisplay, resolution in minutes - RAZ ABS/INC.Through-light illumination with green filter for imageswith high contrast and easy and safe measuring.Top-light with rotatable optical fibres for perfectillumination. Save-Lamp-System - automatic shut-offof the lamps a few minutes after use. Bayonetmount for a quick exchange of the measuringobjectives. Coordinate measuring tables withincrementally graduated glass scales, optoelectro-nic. Resolution 0,001 mm. Measuring range 200 x100 mm. Released, free movements of the table inthe direction of coordinates X. Clockwise and/orcounterclockwise
operation in direction X. Maximum table load 10 kg,without interfering with the accuracy. With lateralcopy holder, TESA calibration certificate anddeclaration of conformity. Protection rating IP 40.Weight approx. 110 kg.ApplicationFor rotation-symmetrical test specimens.
39396Telecentrical measuring objectives
ProjectorType 39397 …
TESA-SCOPE II 500V 101
ObjectivesMagnification Object field Working distance (W) Height (H) Q (D) Length of objective (C) 39398 …
mm mm max. mm max. mm mm10-x 50 138 100 160 87 10120-x 25 138 100 160 82 10250-x 10 100 100 160 61 103
Projector TESA-SCOPE II 500 V39397 - 39398
(39397TESA-SCOPE II 500 VTypeProjector with vertical beam direction. Rotatablescreen made of ground glass, turning range 360°, Ø 300 mm. Cross hairs 30°, 60° and 90° with 4 foilclips. Screen rotation with sexagesimal and decimaldisplay, resolution in minutes - RAZ ABS/INC.Through-light illumination with green filter for imageswith high contrast and easy and safe measuring.Top-light with rotatable optical fibres for perfectillumination. Save-Lamp-System - automatic shut-offof the lamps a few minutes after use. Mounting railfor 2 measuring objectives (10-x / 100/x magnificati-on), indexed positioning. Bayonet mount for a quickexchange of the measuring objectives. Coordinatemeasuring tables with incrementally graduated glassscales, optoelectronic. Resolution 0,001 mm.Measuring range 200 x 100 mm. Released, freemovements of the table in direction of coordinate X.
Right-hand and left-hand operation in direction X.Maximum table load 10 kg, without interfering withthe accuracy. With lateral copy holder, TESAcalibration certificate and declaration of conformity.Incl. of objective, magnification 5-x. Protection ratingIP 40. Weight approx. 200 kg. ApplicationFor comparing the projected images with referentialdrawings.
39398Telecentrical measuring objectives
39397
39395
eng/OP
• Optical Measuring Instruments
www.hhw.de39.32
3
Optical Measuring Instruments TESA VISIO 200 MAN
(TypeIncl. of PC, keyboard, and 20" TFT monitor.Base made of natural stone. Measuring table withprecision guides and quick adjustment. Accuracy XY (E2) 2,9 m + 10L/1000 µm (L in mm),accuracy Z (E1) 2,9 m + 10L/1000 µm (L in mm).
39399 101VISIO 200 MAN TESAVISTA 2.0 with telecentricalfixed objectiveTypeWith colour camera, telecentrical objective included,magnification 2-x (optional: 0,5-x, 1-x and 4-x). Illumination: LED ring light, programm-able segments with 4x 90° quadrants, through-light.
39399 102VISIO 200 MAN TESAVISTA 2.0 with zoom lensand coaxial illuminationTypeWith colour camera and infinitely adjustable zoomlens, magnification from 0,7-x - 4,5-x. Illumination:LED ring light, programmable segments with 4x 90°quadrants, through-light and coaxial illumination.
39399 101-102
Type 39399 …
VISIO 200 MAN with telecentrical objective 101VISIO 200 MAN with zoom lens and coaxial illumination 102
39399
Optical Measuring Instruments TESA VISIO 300 / 300 DCC
(TypeWith USB2 camera (Resolution 3 million pixels).
Note:Additional measuring objectives 0,5-x - 2,0-xavailable on request. Please ask for more specificpaperwork or contact our technical service team.
39400 101TESA VISIO 300 - TESA-VISTATypeThe coordinate table is equipped with a releasesystem in every direction of coordinates. Therefore,the measuring table can be moved quickly, in orderto lokalise the inspection feature to be measured.The fixed objective allows for magnifications of 26-x,52-x, and 104-x on a 20 inch screen.Incl. of software TESA-VISTA for quick, accurate anduser-friendly measurements.
39400 102TESA VISIO 300 - PCDMISTypeSimilar to cat.-no. 39400 101, but additionally withmotor-driven zoom (0,7-x - 4,5-x). The softwareincludes a calibration routine for the zoom.Incl. of software PC-Dmis Vision for self-program-ming of the measurement processes.
39400 103TESA VISIO 300 - DCC - PCDMISTypeSimilar to cat.-no. 39400 102, but with automaticadjustment of the measuring table by means ofservo motors.
39400 101-102
Type 39400 …
TESA VISIO 300 - TESA-VISTA 101TESA VISIO 300 - PCDMIS 102
TESA VISIO 300 - DCC PCDMIS 103
39400 103
39400
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.33
3
. ( Software TESA-VISTA
TypeCompact, manual 2D-measuring instrument forworkpieces that could notbe measured usingcommon tactile tools.- Z-axis:
This coordinate axis ismoved from the front ofthemachine, directly.
- X/Y measuring tables: Both X and Y coordinatet-ables have a built-in,manually-operated release-system. This speeds upany displacement needed-to reach the measurementarea.
- Manual zoom: Your VISUAL 250 comeswith anindexable handoperatedzoom, with opticalmagnifi-cations from 0,7x - 4,5x (6,5:1).
- Illumination: The Visual 250 is fitted withtwoilluminations throughLEDs – i.e. one ringlightforepiscopic illumination (top)along with onediascopicillumination (bottom) forthe part profileprojection.Both are controlled over the softwareinterface.
- Laser pointer: A laser pointer is includedto makeeasier tracing themeasurement zone on thepartbeing inspected.
Incl. of software TESA-VISTA for quick, accurate anduser-friendly measurements.
ApplicationFeaturing a solid mechanical construction, the
machinecan equally be used in the workshop as inthe inspectionlaboratory.
Optical Measuring Instrument STANDARD GAGE - VISUAL 25039405
Typ 39405 …
STANDARD GAGE - VISUAL 250 101
Technical specifications Visual 250. Releasable X-axis x. Releasable X-axis x. Measuring volume (X/Y/Z) 250 x 150 x 200 mm. Max. admissible workpiece weight 10 kgAccuracy. MPE XY (E1 XY) 3,9 µm + L/150 * (L in mm)). MPE XY (E2 XY) 4,9 µm + L/150 * (L in mm))* m less or equal to 5 kg uniformly distributed
Video camera and optical measuring system. CCD colour camera 752 x 582 pixels. Indexable zoom 0,7-x - 4,5-x. Through-light illumination white LED. Ring light with white LED. Red laser pointer for tracingAdditional specifications. Weight (without viewing screen and computer) 180 kg. Power supply 115 - 230 Vac +/- 10 %, 50 - 60 Hz. Size (without viewing screen and computer), L x H x D 716 x 1015 x 753 mm. Reference temperature 20 °C +/- 1 °C. Operating temperature 10 °C - 40 °C. Rel. humidity less than 80 %, non-condensing. Application software TESA-VISTA x
Simple 3-D applications after only approx. 3 hours of instruction.The simple and user-friendly software TESA-VISTA enables the user to quickly and exactly measure manygeometrical mould parts.
Please contact us!
Main characteristics- Visualisation in direction of coordinates X, Y und Z, with a resolution of 0,001 mm. - Zero-setting of the coordinate display by a simple mouse click.- Metric and imperial measuring system.- Cartesian and polar coordinate system.- Memory for video images.- Depiction in drawing of the pre-set and the measured geometrical mould parts.- Automatic determination of edges.- Supported and guided measuring in direction Z.
- Point- Radius- Diameter- Quadrant- Angle- Straight line- Distance (X/Y)- Recess
- Z measurements- Aligning- Rectangularity- Parallelism- Theoretical point- Theoretical diameter- Transcription of both X and Y
coordinate zero points
Geometrical mould parts and measuring functions
39405
eng/OP
• Folding Rules • Pocket Tape Rules • Telescopic Length Gauge
www.hhw.de39.34
3
. ( Quick Measurement of Rotation-SymmetricalParts
The optoelectronical instruments TESA-Scanoffer the perfect solution for quick andcontactless measuring of rotation-symmetricparts. Several measuring methods, such asused e.g. with projectors and measurementmicroscope, are now combined in an singlemeasuring instrument. TESA offers a completerange of products for workpieces with diame-ters from 0,3 mm - 80 mm and a length up to500 mm.
Thread measurementsExternal threads are important geometricalelements of rotation-symmetrical parts. It canbe very difficult to measure them correctly.This is not true for the TESA-Scan, becausethese instruments determine the real profile ofany thread profiles. A measuring slide table(with TESA-Scan 50 Plus and TESA-Scan 80Plus swivelling around the pitch angle) fullyshows the actual profile, the groove of thethread, and the pitch, even for worm threads.
Special brochures for measuring rotation-symmetric parts available on request.
Please contact us!
Type TESA-Scan 25 TESA-Scan 50 TESA-Scan 50 plus TESA-Scan 80 TESA-Scan 80 plusMeasuring range (D) mm/inch: 25,0 / 1,0 50,0 / 1,96 50,0 / 1,96 80,0 / 3,1 80,0 / 3,1Largest workpiece mm/inch: 200,0 / 8,0 275,0 / 10,8 500,0 / 19,7 500,0 / 19,7 500,0 / 19,7Smaller numerical interval µm/inch: 0,2 / 0,00001 0,3 / 0,00001 0,3 / 0,00001 0,2 / 0,00001 0,2 / 0,00001Error tolerances (D) µm/inch: 1,5 / 0,06 2,0 / 0,08 2,0 / 0,08 1,5 / 0,06 1,5 / 0,06Error tolerances (L) µm/inch: 6,0 / 0,24 7,0 / 0,28 7,0 / 0,28 7,0 / 0,28 7,0 / 0,28Repeatability (D) (+/- 2s = 95%) mm/inch: 0,001 / 0,00004 0,001 / 0,00004 0,001 / 0,00004 0,001 / 0,00004 0,001 / 0,00004
. ( Software PC-Dmis VisionThe manifold programming possibilities of the software PC-Dmis, it is long-term solution because it can be adapted totechnological innovations. The test reports are outputted in different formats and can bealtered by the user in order to customise their appearance.
Main characteristics- Measurements in real time, all the way down to sub pixels.- Programming follows the principle -show and click-.- Automatic determination of edges (increase in positioning
velocity, accuracy of cross hairs and in repeatability). - Recording of a larger number of measuring points for
determining deviations in shape with increased accuracy.- Take-over and use of CAD files of different formats.- Offline creation of programme parts.- Easy programming.- Reverse engineering with the possibility to export files in CAD
format.- Automatic determination of the respective magnification.
Repeated calibration of the measuring objective during theprocess of programming is not necessary.
- Automatic and/or manual monitoring of the tools.- Simplified measuring in direction Z thanks to focussing in
graphics mode.- Display of the measured values on the screen, inclusive of
those concerning the position of the geometrical mould partsand the edge determination.
Please contact us!
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.35
3
Folding Rules
39510 101
qTypeMade of beechwood, black millimeter graduation onboth sides, red decimal figures, with brass-platedsteel spring joints, element thickness 3 mm,weatherproof dip coating, yellow. EC accuracyclass III.
39510 102
0Type3 mm thick elements of red beech, red decimalfigures, the edges of the measuring rods areequipped with cm and mm graduation on both sides.Built-in steel spring joints ensure the easy handlingand the unsurpassed service life of the elements.With covered rivets. EC accuracy class III.
39512
qTypeMade of aluminium, markings etched and jet-black,nickel-plated steel spring joints, element thickness1,4 mm, spring-hardened dip coating, aluminiumcolour. EC accuracy class II.
39514TypeMade of glass-fibre reinforced plastics, duplexmillimeter graduation with red decimal numbers,section links made of stainless steel, without visiblerivets, therefore full readability, white colour. EC accuracy class III.
39514 101- Overall length (folded) 130 mm.
39510 101
0 q qLength Width Number of elements 39510 … 39510 … 39512 … 39514 …
m mm1 16 6 101 1012 16 10 1022 14 10 1032 15 10 104
39510 102
39512 103
39514 104
39510 - 39514
Pocket Tape Rule Quicky
ßTypeStainless steel, white lacquered. Automatic unwin-ding Rubber ring at the tape exit for stop and gofunctions. EC accuracy class II.ApplicationReplaces a standard folding rule. The tape measureis more compact, robust, and exact. It is always flaton the ground, dimensions can therefore betransmitted better and more exact.The unwindedtape always has a continuous straight edge and canthus be perfectly used as a ruler.
39518
Length Tape width 39518 …m mm2 16 101
39518
MTypeRectangular profile made of eloxed light metal. Theprofiled rods are sliding on wear-resistant and dust-absorbing plastic guides. Retracting length readablethrough view window. Heavy-duty use thanks toinbuilt measuring tape and oversised rewindingdevice. Including carrying case.
38130
Measuring length 38130 …m5 101
Telescopic Length Gauge38130
eng/OP
• Pocket Tape Rules
www.hhw.de39.36
3
Pocket Tape Rule Video Flex
VTypeHousing made of impact-proof plastics, grey. Viewerfor inside measurements. Automatic tape retractionwith return safety device. Steel tape, yellow, lessdazzle thanks to -Anti-Reflect coating, continuous
mm graduation. Sliding end hook for stop and hookmeasurements.EC accuracy class II.
39528
Length Tape width 39528 …m mm3 13 101
39528
Pocket Tape Rules
qTypeHousing highly impact-resistant made of ABSplastics, free running tape with stop button, made ofbest-quality spring steel, white enamelled, millimetergraduation top and bottom. EC accuracy class II.
ApplicationFor outside and inside measurements, insidedimensions are read off directly in view window.
39530
Length Tape width 39530 …m mm3 13 101
39530
Pocket Tape Rules
qTypeHousing made of polyamide with stainless steelbase. Measuring tape for inside measurementswit-hout stop button (free-running - pull-push-tape).
Viewing window with magnifying glass effect,graduation is not upside-down (no reading errors).Millimeter graduation top and bottom. EC accuracy class II.
39531
Length Tape width 39531 …m mm2 13 1013 13 102
39531
Pocket Tape Rules
ßTypeHousing highly impact-resistant made of ABSplastics, coated steel tape, millimeter graduation topand bottom, automatic tape retraction. EC accuracy class II.
Length Tape width 39520 …m mm2 13 1013 13 102
39520
Length Tape width 39527 …m mm3 13 102
Pocket Tape Rules39527
iType PanoramicTypeThe lower part of the housing is protected by a U-style aluminium strip. Inside dimensions can be readoff directly in view window, coated steel tape. Endhook can be adjusted to allow for thickness of stock,to avoid errors in measurement when rule hooksover or abuts the stock. Millimeter graduation topand bottom. EC accuracy class II.
ApplicationFor outside and inside measurements.
39527
39520 10239520 101
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.37
3
Pocket Tape Rules
qTypeHousing made of ABS-plastics. With carrying loop.Automatic tape retraction with stop button, coldstrengthened, stainless spring tape made ofchrome-nickel steel, matt finish surface, printed
graduation with red metre pre-figures (enamelled),with artificial resin lacquer as wear-resistantprotection (enamelled). EC accuracy class II.ApplicationFor outside and inside measurements.
39532
Length Carrying loop 39532 …m2 - 1013 - 1025 x 103
39532
Pocket Tape Rules
ßTypeHousing highly impact-resistant made of ABSplastics, automatic tape retraction, with stop button,coated steel tape, millimeter graduation. ECaccuracy class II.ApplicationFor outside and inside measurements.
39535Without viewing window.
39536With viewing window.
39535
Length Tape width 39535 … 39536 …m mm3 13 101 1015 19 1028 25 103
39536
39535 - 39536
Length Tape width 39543 … 39543 …m mm3 16 1015 19 102 2018 25 103
0Type Ergonomically-shaped housing made of impact-pro-of ABS-plastics with rubber coating, removable clipand wrist lanyard. Matte, acrylic-coated steel tapewith mm-graduation on one side. End hook withmagnet for improved fixation. Automatic taperetraction, stop button. EC accuracy class II.
39543 201TypeWith vertical graduation.ApplicationFor simple and safe reading of height and lining-up.For ergonomical work (no turning of the head).
39543 101-103
Pocket Tape Rules 39543
ßTypeErgonomically shaped housing made of impact-pro-of ABS-plastics. Stop button. Damper system for
soft tape retraction. Tape with nylon coating.EC accuracy class II.
39541 103
Length Tape width 39541 …m mm2 16 1013 16 1025 19 1035 25 1048 25 105
10 25 106
39543 201
Pocket Tape Rules39541
eng/OP
• Tape rules • Pocket Tape Rules • Scribing Tape Measures
www.hhw.de39.38
3
Tape Rules Popular
VTypeHousing made of impact-proof plastics, red, withgrey protective coating. Automatic tape retractionwith return safety device. Steel tape, yellow, lessdazzle thanks to -Anti-Reflect coating, continuousmm graduation. Sliding end hook for stop and hookmeasurements.Two-part stop for exact engaging.Damping system for soft retraction and protection of
the end hook. With belt clip. EC accuracy class II.
39544
Length Tape width 39544 …m mm3 13 1015 19 1028 25 103
39544
Pocket Tape Rules DYNAGRIP
iTypeBi-material-housing with ergonomic design, non-sliphandle, highly impact-resistant. 0,13 mm tapemeasure: 15% thicker than standard tape measu-res, for higher thickness and stability. With lockingdevice, extra-strong return spring and soft taperetraction.
Corrosion-protected MYLAR-coating guaranteeslonger service life and protects against scratchesand chemicals. EC accuracy class II.ApplicationFor outside and inside measurements.
39547 102With 3-x riveted end hook and buffer system forend hook protection during tape retraction.
39547
Length Tape width 39547 …m mm3 16 1015 19 102
39547
iTypeWith stop button, automatic tape retraction andremovable belt clip. Yellow painted steel tape, two-colour graduation. Corrosion-protected MYLAR-coating guarantees longer service life and protectsagainst scratches and chemicals. EC accuracy class II.ApplicationFor outside and inside measurements.
39545 101-102TypeMetal housing, millimeter graduation top andbottom, extra rigid.
39545 103TypePlastic housing, millimeter and inch graduation.
39545 104-107TypePlastic housing, millimeter graduation top andbottom. Fold-out hook fixed by 3 rivets avoids brakeof the hook. Larger tape widths ensures higher bendstability. Length 10 m with buffer system.
39545
Length Tape width Housing 39545 …m Inch mm2 – 12,7 metal 1013 – 12,7 metal 1023 10 12,7 plastics 1035 – 19,0 plastics 1045 – 25,0 plastics 1058 – 25,0 plastics 106
10 – 25,0 plastics 107
Pocket Tape Rules POWERLOCK39545
Pocket Tape Rules
ßTypeErgonomical housing made of impact-proof ABSplastics with non-slip rubber coating. Stop button.Damper system for soft tape retraction. Tape withnylon coating.EC accuracy class II.
39542 102
Length Tape width 39542 …m mm3 16 1015 19 102
39542
39542 101
Performance requires quality.www.atorn.com
Digital slide callipers by ATORN:
ATORN‘s high-quality measuring tools.
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.39
3
Pocket Tape Rules -Tri-Matic-
VTypeErgonomically shaped housing made of impact-pro-of ABS-plastics. Handy size thanks to specialwinding. Anti-break thanks to reinforced end hook,2-part break for exact stopping. Non-reflectivecoating. Damper system for soft tape retraction.EC accuracy class I.
ApplicationFor outside and inside measurements.
39549
Length Tape width 39549 …m mm3 13 1005 19 1028 25 103
10 25 104
39549
TALMETER Spare tapeMeasuring length Tape width Arch 39550 … 39551 …
m mm mm2 16 1,5 101 1013 16 1,5 102 102
Scribing Tape Measures TALMETER
V39550TypeThe TALMETERscale is a self-winding steel tape, itcan be automatically fixed with a clamping force ofapprox. 5 kp (50 N) at any length. Easily extendablemeasuring tongue with a length of 100 mm allowsinside measurements with the same grade ofaccuracy and easy handling as outside measure-ments. Combined measuring and scribing by useof thin, hardened steel, no need for pencil, markingpossible even on steel. Accuracy of graduation 0,3mm on total length of scale. Reading of measure-ments without any angle errors. Ø of pipes andcylinders readable by pi-scale.
ApplicationCan be used for inside measurements, and as aparallel scriber and special divider. The tool - andnot the human eye - determines the accuracyduring marking as well as during measuring.When measuring with the TALMETER, the length isregistered by the tool and automatically stored.During marking, the length is transmitted to theworkpiece by the tool. The TALMETER can also beused as a special devider for marking measure-ments (with the edge of a workpiece as a centre).Each of the three edges can be used as a knifeedge or centre point. Marking on unhardened steel.
39551Spare tape
39550
39550 - 39551
Measuring edge andknife edge
Red numbers with measuring tongue Pi-scale
Measuring edgeand knife edge
Stopangle90°
Measuring edgeand knife edge
Markinghole in 10
cm line
Black numbers withoutmeasuring tongue
cm-scale
Free wheel button
Measuring tongueretractable
39551
Reading pointer
eng/OP
• Wind-Up Tapes in Cases • Wind-Up Tapes in Light Metal Frame
www.hhw.de39.40
3
Wind-Up Tapes in Cases
ßType3:1 ratio for quick winding and unwinding. Housingmade of impact-proof ABS plastics with non-sliprubber coating. Foldable crank. Tape with nyloncoating.
39552
Length Tape width 39552 …m mm15 9,5 10120 9,5 10230 9,5 103
39552
Wind-Up Tapes in Cases -RADIUS-
qTypeWith FLEXTOP protection, reliably preventingbreakage of the beginning of the tape. Casemade of highly shock-resistant plastics. Case withSoftfinish non-slip surface. Easy handling thanks tolarge fold-away crank. The end fitting of the tape isparked in a position that prevents breakage of thetape. The crank can be mounted on both sides forright-hand and left-hand use (1). Tolerance incompliance with EC accuracy class II (+/- 2,3 mmon 10 m length).
39555Stainless steel tapePONTARITTypecm-graduation on one side. Cold-strengthenedspring tape made of chrome-nickel steel. Mattfinished surface. Printed graduation with red meterpre-figures, enamelled. Synthetic resin lacquer forabrasion protection, enamelled.
39557Steel tape, whiteTypemm-graduation on one side. Hardened springtape made of carbon steel C75. Corrosion protectionthanks to phosphate coating. White synthetic resinlacquer, enamelled. Printed graduation with redmeter pre-figures, enamelled. Synthetic resinlacquer for abrasion protection, enamelled.
39559Steel tape, with polyamide coatingISOLANTypemm-graduation on one side. Hardened springtape made of carbon steel C75. Corrosion protectionthanks to phosphate coating. Yellow synthetic resinlacquer, enamelled. Printed graduation with redmeter pre-figures, enamelled. Full polyamide coatingfor particularly high resistant abrasion protection.Excellent protection against breaking, chemicals,fats, oils and diluted acids.
39561Glass-fibre tapeFILONTypecm-graduation on both sides. Glass-fibre threads.Extruded plastic-coating. Printed graduation with redmeter pre-figures. Synthetic resin lacquer forabrasion protection. High flexible, non-conducting,resistant against water and almost all chemicals.
39555 - 39561
Stainless steel Steel white Steel polyamide Glass fibre tapeLength Tape width 39555 … 39557 … 39559 … 39561 …
m mm10 13 101 101 101 10120 13 102 102 102 10230 13 103 103 103 10350 13 104
39555
39557
39559
39561
39555 - 39561
(1)
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.41
3
Wind-Up Tapes in Cases
qTypeSteel tape, with white lacquer, mm-graduationon one side. Hardened spring tape made of carbonsteel C75. Corrosion protection thanks to phosphatecoating. White synthetic resin lacquer, enamelled.Printed graduation with red meter pre-figures,enamelled. Synthetic resin lacquer for abrasionprotection, enamelled. Plastic case, housing madeof ABS-plastics. Crank mechanism polyamide. Withcarrying loop.Tolerance in compliance with EC accuracy classII (+/- -2,3 mm on 10 m length).
39563
Length Tape width 39563 …m mm10 10 10120 10 102
39563
Wind-Up Tapes in Light Metal Frame -ERGOLINE-
qTypeWith FLEXTOP-protection, reliably preventingbreakage of the beginning of the tape. Perfectguiding of the tape thanks to robust, silver anodisedaluminium rails, easily exchangeable. Ergonomicpistol handle eases the stress on the wrist, with softrubber non-slip surface. Comfortable windingmechanism, the ball bearings are protected againstdirt by the case. Stable, exchangeable fold-awaycrank. The end fitting of the tape is parked in aposition that prevents breakage of the tape. Thecrank can be mounted on both sides for right-handand left-hand use. (1) Tolerance in compliancewith EC accuracy class II (+/- 2,3 mm on 10 mlength).
39570Stainless steel tapePONTARITTape width 13 mm, mm-graduation on one side,straight frame. Cold strengthened spring steel tapemade of chrome-nickel steel. Matt finished surface.Printed graduation with red meter pre-figures,enamelled. Synthetic resin lacquer for abrasionprotection, enamelled.
39572Steel tape, whiteTape width 13 mm, mm-graduation on one side,straight frame. Hardened spring tape made ofcarbon steel C75. Corrosion protection thanks tophosphate coating. White synthetic resin lacquer,enamelled. Printed graduation with red meter pre-figures, enamelled. Synthetic resin lacquer forabrasion protection, enamelled.
39574Steel tape, with polyamide coatingISOLANTape width 13 mm, mm-graduation on one side.Hardened spring tape made of carbon steel C75.Corrosion protection thanks to phosphate coating.Yellow synthetic resin lacquer, enamelled. Printedgraduation with red meter pre-figures, enamelled.Full polyamide coating for particularly high resistantabrasion protection. Excellent protection againstbreaking, chemicals, fats, oils and diluted acids.
Note:cat.-no. 39574 101 with straight frame, cat.-no. 39574 103-104 with V-frame.
39576Glass-fibre tape FILONTape width 13 mm, cm-graduation on both sides,V-shaped frame, glass-fibre threads. Extrudedplastic-coating. Printed graduation with red meterpre-figures. Synthetic resin lacquer for abrasionprotection. High flexible, non-conducting, resistantagainst water and almost all chemicals.
39570 - 39574
Stainless steel Steel white Steel polyamide Glass fibre tapeLength 39570 … 39572 … 39574 … 39576 …
m20 10125 102 10230 103 103 103 10350 104 104 104
39570
39572
39574
39576
39574 - 39576
39570 - 39576
(1)
eng/OP
• Circumference Tape Rules • Rules
www.hhw.de39.42
3
Circumference Tape Rules
TypeMillimeter scale, cover strip with 0,1 mm vernierreading, accuracy in compliance with DIN ISO2268 m. Upper scale graduation shows diameter,lower one circumference.ApplicationFor simultaneous measurement of circumferenceand diameter of all round elements, e.g. rotary presscylinders.QualitySpring band steel, with etched graduation.
Note:Larger capacities and corrosion resistant types areavailable on request.
39580
39580
Precision Spring Steel Rules DIN 866/B
Type Dazzle-free surface with matte finish. Scale deep-etched and black chrome-plated. Graduation topand bottom 1/1 mm. Quality Stainless steel.
39799
39799
Flexible Rules
TypeJet black etched, with attachment eye, graduationone side both top and bottom 1/2 mm, other sideboth top and bottom 1/1 mm. Starting at 1000 mmon one side, top 1/2 mm and bottom 1/1 mm.EC accuracy class II.
QualityStainless spring strip steel, matt chrome finish.
39800
39800
Flexible Rules
qTypeDeep black graduation marking, fairly resistantagainst oils, fats and almost all chemicals. Roundededges, with attachment eye. Graduation on one side1/2 mm top, 1/1 mm bottom. EC accuracy class II.QualityStainless steel, hard-rolled spring band steelwith matt finish surface.
39803
39803
Measuring range Circumference Ø Tape width 39580 …mm mm mm
60 - 950 20 - 300 16 101940 - 2200 300 - 700 16 102
2190 - 3460 700 - 1100 16 103
Length Width x Thickness 39799 …mm mm150 13 x 0,3 101200 13 x 0,3 102300 13 x 0,3 103500 18 x 0,5 104
1000 18 x 0,5 105
Length Width x Thickness 39800 …mm mm150 13 x 0,5 101200 13 x 0,5 102300 13 x 0,5 104500 20 x 0,5 105
1000 25 x 0,5 106
Length Width x Thickness 39803 …mm mm150 13 x 0,5 102200 13 x 0,5 103300 13 x 0,5 105500 18 x 0,5 107
1000 18 x 0,5 103
ß Measuring and Laying-Out Tools, Testing Instruments
eng/OP www.hhw.de 39.43
3
Flexible Rules DIN 866/B
&TypeWith lasered graduation, with attachment eye. EC accuracy class II.QualityStainless spring strip steel, matt chrome finish.
39805Graduation top and bottom 1/1 mm.
39807Graduation top 1/2 mm, bottom 1/1 mm.
39805
39807
39805 - 39807
Measuring Rods DIN 866/B
TypeWith laser marking 1/1 mm.
QualityStainless steel, hardened.
39810
39810
Working Rules DIN 866/B
TypeParallel edges and faces machined, laser marking1/1 mm.
39815
39814 - 39815
Multi-purpose Rules
TypeDazzle-free precision scale, black markings, withprotection end on right plus inking-in edge. 1/1 mm-graduation.ApplicationThe multi-purpose rule for workshop, checking,office and handicraft applications.
QualityAluminium section drawn, anodised.
39820
39820
Inspection Rules DIN 866/A
TypeFaces machined, parallel edges finely machined,protective ends on both sides, laser marking 1/1mm.
Note:also usable as straight edge!
39825
39824 - 39825
Standard steel Stainless steelLength Width x Thickness 39824 … 39825 …
mm mm500 30 x 6 101 101
1000 40 x 8 102 1021500 40 x 8 103 1032000 50 x 10 104 104
Standard steel Stainless steelLength Width x Thickness 39824 39825 …
mm mm3000 50 x 10 105 1054000 60 x 12 106 1065000 70 x 14 107 1076000 80 x 15 108 108
Length Width x Thickness 39807 …mm mm150 13 x 0,5 101300 15 x 0,5 103300 30 x 1,0 104500 20 x 0,5 105500 30 x 1,0 106
Length width x thickness 39805 … 39807 …mm mm
1000 20 x 0,5 1071000 30 x 1,0 1081500 35 x 1,3 1092000 35 x 1,3 110
Length Width x Thickness 39810 …mm mm500 30 x 2 101
1000 30 x 2 1021500 30 x 2 103
Length Width x Thickness 39810 …mm mm
2000 30 x 2 1043000 30 x 2 105
Length Width x Thickness 39820 …mm mm300 50 x 5 101600 50 x 5 102
Length Width x Thickness 39820 …mm mm
1000 50 x 5 103
Standard steel Stainless steelLength width x thickness 39814 … 39815 …
mm mm500 25 x 5 101 101
1000 30 x 6 102 1021500 30 x 6 103 1032000 40 x 8 104 104
Standard steel Stainless steelLength width x thickness 39814 … 39815 …
mm mm3000 40 x 5 105 1054000 50 x 10 106 1065000 60 x 12 107 1076000 70 x 15 108 108
eng/OP
• Batteries • Battery Chargers
www.hhw.de39.44
3
Batteries
TypeAll batteries without mercury.
39900 401-405Industrial alkaline– Alkaline-manganese heavy-duty cells.– Latest technologies.– Optimum leak protection.– Highest quality standard.– Excellent operating range (-20 - + 55°C).
39900 101 39900 103
39900 102
39900 212
39900 213-214 39900 401 39900 402
39900 403 39900 404 39900 405
39900 215
Type Voltage Description pack = pcs. 39900 …Volt
Button cell 1,5 357, SR 44, SR 1154 1 101Button cell 3,0 CR 2032 1 102
Lady 1,5 LR 1, E 90, UM 5, N 1 103– 3,0 CR 123 AP, EL 123 AP 1 212
A23 12 A23-MN21-23GA 1 215Button cell 3,0 CR1 1 213Button cell 1,4 AC 13 E, PR 48 6 214
Mono 1,5 EN 95, LR 20, D 1 401Baby 1,5 EN 93, LR 14, C 1 402
Mignon 1,5 EN 91, LR 6, AA 4 403Micro 1,5 EN 92, LR 03, AAA 4 404
E-block 9,0 EN 22, 6 LR 61, 9 Volt 1 405
39900
Batteries (Lithium)
Type– State-of-the-are lithium technology.– Considerably less weight than alkaline batteries.
– Up to 7 times longer service life than alkalinebatteries for some applications (e.g. in digitalcameras) .
– Can be used up to 15 years.
39901 101 39901 102
Type Voltage Description pack = pcs. 39901 …Volt
Micro 1,5 FR03, L91, AAA 2 101Mignon 1,5 FR6, L91, AA 2 102
39901
Rechargeable Batteries (NiMH)
Type– Latest nickel-metal-hydride technology (NiMH)– High loading capacity, therefore longer use until
next loading– no memory-effect (re-loading possible anytime)
– environmentally friendly, thanks to cadmium-freetechnology
– Up to 1000 loading cycles, therefore extremelyeconomical
39905 201
Type Voltage Capacity Description pack = pcs. 39905 …Volt mAh
Mono 1,2 2500 D 2 201Baby 1,2 2500 C 2 202
Mignon 1,2 2450 AA 2 203Micro 1,2 850 AAA 2 204
E-block 8,4 175 9 V 2 205
39905 202 39905 203
39905 204 39905 205
39905
Battery Chargers
Type Display of capacity by means of LED's. Protectionagainst wrong insertion of rechargeable batteries.
39910 Quattro Charger Type Charges AA, AAA, and 9 V rechargeable batteries,display of charging status by means of 4 LEDs(single shaft monitoring). With overload protection.Trickle charge, reverse battery protection, andcharging current monitoring. Detection of defect
batteries.Incl. of rechargeable batteries: 2 x AAMignon 2450 mAh and 2 x AAA Micro 1000 mAh. 39911 Universal battery charger Type Automatically detects the type of rechargeablebattery (NiMH or NiCd) and the capacity of therechargeable batteries and checks the chargingprocess. Maximises the service life of the recharge-able batteries thanks to the integrated microproces-sor technology. Charging time 5 hours (NiMHrechargeable batteries, sizes AA, AAA, C, D, 9 V)
39910
39911
Quattro Multi-purposeFor rechargeable battery For rechargeable battery min. charging time 39910 … 39911 …
Sizes Technology for NiMH rechargeable batteries hours AA, AAA, 9 V NiMH, NiCd 4 301
AA, AAA, C, D, 9 V NiMH, NiCd 2 201
39910 - 39911
Recommended