View
1
Download
0
Category
Preview:
Citation preview
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
1
17-21 Wenlock Road –
Building a 10 Storey Hybrid
Structure in London
17-21 Wenlock Road – Bâtir un ouvrage mixte à 10 niveaux à Londres
Alex Smith
Hawkins\Brown + Canterbury School of Architecture
UK-London
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
2
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
3
17-21 Wenlock Road
1. Introduction
Hawkins\Brown's proposal was generated from the desire to maximize the amount of
daylight and ventilation available into each flat and to avoid a „dead‟ light well that is shared by too many people to make it useful as a shared amenity space. When complete
the building will become one of the tallest Cross Laminated Timber Hybrid buildings in
Europe.
The „cruciform‟ plan provides four courtyards with better visual connections to the city fostering an intimate community experience for residents. A series of twists ensures all
flats to have 2 or 3 aspects with generous terraces. The „skewed form‟ faces the views up and down the Basin rather than directly across the narrow waterway and offers a more
dynamic form when seen in long view from the Canal.
To reinforce the streetscape in a conservation area the timber clad “cross” is protected
by a dark brick grid, providing a sense of defensible space to residents inside and giving
much needed definition to Wenlock Road.
Image 1: CGI representing how the scheme will look when completed in 2015.
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
4
Image 2: First, Second and ninth floor plans. Not to scale.
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
5
2. Choosing CLT/Hybrid
Image 3: Web articles from building and construction manager about hackney‟s emerging policy
The buildings situated in the London Borough of Hackney which has been a positive sup-
porter of CLT and timber construction for some years. In 2012 the borough even consid-ered wood first policy where by applicants who wished to gain planning approval would
have to demonstrate that timber structures had been considered and sufficient just ifica-tion provided if timber was not chosen. This policy has not yet to materialise but the
emerging planning context proved crucial to the way that this scheme was considered
and the structure procured.
Hawkins\Brown have previous experience of cross laminated timber having recently
completed a large school building in Kent at Hilden Grange Preparatory school. As a re-sult of this throughout early discussions with the planners we had talked about the possi-
bility of building the scheme in CLT.
Image 4: Hawkins\brown‟s recently completed Hilden Grange School was constructed from CLT.
Image copyright Tim Crocker
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
6
The scheme at 17-21 Wenlock Road was awarded planning in 2012 and unusually one of the conditions of the approval was that the scheme be constructed in Cross Laminated
Timber. To our knowledge this is the first time that the structural material of a building has been conditioned in such a way.
It is relatively common for housing schemes in the UK to have an undefined structural system at planning stage as it allows the developer flexibility to choose the most efficient
solution at a later date. By conditioning timber the planners in Hackney were removing
the element of choice from the developer which ultimately could have put the whole pro-ject at risk. Whilst weas architects understood the potentials of the material and are
strong advocates we knew that the challenges faced in constructing such a complex scheme would mean that innovation and significant further collaborative research would
be required.
3. Possible Design solutions
During the detailed design development stage of the project the team considered 3 struc-tural options and engaged with various subcontractors and specialists to develop high
level strategies to test costs, efficiency and aesthetics. The 3 solutions considered were
as follows:
1. Waffle-like structurals labs
Giant waffle like floor structures formed from glulam beam sand CLTs labs which would occur every 2 floors to take the strain of the cantilevers. All walls and floor in
between would be solid CLT. Floors became too thick and efficiencies and aesthetics would have suffered dramati-
cally.
2. Pure CLT.
All internal walls of the structure would be formed in CLT to create a giant core like
structure. All walls become progressively thicker the further down the structure they are located. All timber would need to be lined with multiple layers of plasterboard en-
sure it is protected from fire for 90 mins. Expensive, heavy, extremely thick labs to allow cantilevers. Good for small buildings,
less suitable for building towers.
3. CLT/steel hybrid.
In the hybrid solution timber and steel are used in unison to increase efficiency and stiffen the structure. Only the floors and external structure are made from tim-
ber/steel meaning that alterations to flat layouts are possible in the future. Timber is
still the primary material by volume and its prefabrication allows an quicker construc-tion time on-site.
Uses the best attributes of timber steel and concrete make an efficient quick structure that can be built 10 Stories high and is more adaptive to future reconfiguration and re-
use.
The hybrid CLT/steel solution was the most viable option for the building as it allowed the
developer (Regal Homes) to also extend the concrete core to level 10 leading to a greater overlap of subcontractors on-site and a reduction in overall programme.
Of particular note are the fire requirements for the structure which state that it must re-
tain structural integrity for 90 minutes in the event of fire. Sign ificant costs were saved by choosing option 3 as it meant that the rewereless structural elements and the refore-
less structural material to protect.
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
7
4. Detailed Design
Ultimately B+K Structures won the contract for the CLT/Steel hybrid and the design was
developed with their engineers using a series of 3d models and 2d drawings. Of all the subcontractors considered for the project B+K structures are the best suited to hybrid
construction as their parent company Bowmer and Kirkland have significant experience in the steel and concrete in dustres meaning that they do not suffer commercially by utilis-
ing other structural materials in unison with timber.
Image 5: 3d modelling techniques were used to review, and refine the CLT detailing.
The architectural detailing around the structure is relatively simple, the building is clad in
cedars lats and dark bricks and the interior is lined throughout with plaster board to sat-isfy acoustic and fire requirements.
A light weight insulation/screed with under floor heating based system was utilised for the floor dealing with acoustic and thermal issues at once.
Whilst the buildings twisting form means that the flat layouts do not stack the services routes through the building are vertical and concealed within the external cladding or
internal riser cupboards near the central core. Pre-fabricated service cuts were co-ordinated with the services engineers to ensure that all pipe work was correctly sized at
an early stage.
Unfortunately due to fire constraints which are based on the overall height of the building exposing the timber internally proved difficult. In addition, if we were to expose the CLT
it would have been more difficult to achieve the strict air tightness requirements and run the required ventilation ducting in the ceiling. On previous lower rise educational projects
Hawkins\Brown have exposed the timber and achieved great finishes but for tall residen-tial buildings the UKs current legislation mean that this is practically not possible.
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
8
Image 6: 3d Exploded isometric drawing showing the construction components of the scheme.
5. Progress to date
The structure has reached its full height and progress is already being made to lin-ing/cladding and window installation below. To follow are some up to date progress
shots.
20. Internationales Holzbau-Forum IHF 2014
17-21 Wenlock Road – Building a 10 Storey Hybrid Structure in London | A. Smith
9
All images in section 5 are copyright Tim Crocker
Recommended