10 June 20031 Manual Door Operation. 10 June 20032 Operate Doors Allows you to remotely operate...

10 June 2003 1

Manual Door Operation

10 June 2003 2

Operate Doors

• Allows you to remotely operate individual doors or sets of doors– Locking– Unlocking– Updating

10 June 2003 3

Open the Operate Doors Window

• Click the Operate Doors tool bar button

OR

• Select the Operate > Doors pull-down menu option

10 June 2003 4

Operating Doors

• Door operation commands are performed on selected doors– Select the Door Class– Select the specific doors– Perform the command– View the status/results

10 June 2003 5

Door Class

• Categorizes doors by physical location– Assigned by door in the Setup > Doors section

• Allows actions to be performed by category– All, Interior, Exterior

Exterior Door Class

All Exterior Doors

10 June 2003 6

Select the Door Class

• Click on the icon corresponding to the desired door class

• Highlighted icons display the active door classes

10 June 2003 7

Select the Doors

• Click on the icon corresponding to the desired doors

• Highlighted icons display the active doors

10 June 2003 8

Selecting/Deselecting All Doors

• Quickly select all doors within a door class by clicking the button

• Quickly deselect all doors within a door class by clicking the button

10 June 2003 9

Lock Operation

• Click the button to immediately lock all selected doors

• The status of the operation is displayed

10 June 2003 10

Unlock Operation

• Click the button to immediately unlock all selected doors

• The status of the operation is displayed

10 June 2003 11

Timed Unlock Operation

• Click the button to immediately unlock all selected doors for a specific period of time– Assigned by door in the Setup > Doors section

• The status of the operation is displayed

10 June 2003 12

Update Doors Operation

• Click the button to immediately perform a database update for all selected doors’ controllers

• An intermediate status window appears, showing the individual updates being performed

• When complete, operation status is displayed

10 June 2003 13

Cancel an Operation

• Click the button to cancel an operation