View
638
Download
2
Category
Preview:
Citation preview
How To Make: Valentine’s Day Pendant
Materials: 7 inches of 20 gauge copper wire, 4 inches of 28 gauge copper wire, 2 crackle beads-size 6 mm, 1 glass bead-size 3 mm x 4 mm, 1 glass bead-size 10 mm x 12 mm, 1 copper bead-size 6 mm, 1 copper bead-size 3-4 mm
Tools: Round nose pliers, wire cutters
Step 1: Create 3 loops as shown in the photo. Do it in the middle of the wire
Step 2: Bend wire as shown in the photo
Step 3: Create 2 small loops then insert crackle beads onto them
Step 4: Wrap wires around the beads, then put copper bead onto both wires
Step 5: Wrap one wire around the other then trim the rest of it
Step 6: Insert beads onto the wire which is left, then create hook shape in order to make final loop, if you need to trim the wire and close the loop
Step 7: Take thin wire, and wrap one end around the base as shown in the photo
Step 8: Put the last bead onto the wire, then wrap the second end around the base. Trim the rest of the wires. Now just attach the chain. Your necklace is ready to wear!
Recommended