• The standard of the electrical installations in Brazil for wall switches and sockets may be installed 10x10cm (Box 4x4) boxes or boxes 10x5cm (Box 4x2).

• Usually are installed on box 4x2, for single or two button to control one or two electrical circuits

Wireless Wall Touch Switch

• The standard of the electrical installations in Brazil use only Live wire (Hot) and Load wire.

• We don’t use neutral wire in home electrical installations

Wireless Wall Touch Switch

• It’s necessary adapt wireless wall touch switch (single key and two key) WL-SFB-C01 and WL-SFB-C02 to box 4x2 (10x5cm)

• Also you need change the WL-SFB-C01, WL-SFB-C02, WL-SFB-C03 and WL-SFB-C04 to use Live(Hot) and Load wire(see on slide 2)

Wireless Wall Touch Switch

Wireless Smart Socket

• It is necessary change the electric plug and connector for Brazilian standard

Wireless Gateway

• Some suggestions for Wireless Gateway controller• Friendly Web Management interface• Wi-Fi: 802.11n to act as Wi-Fi access point or repeater access point