April 27, 2010

Permapave was developed to filter rainwater, eliminate outfall pollution and enable clean water to recharge subterranean aquifers, an undeveloped source of urban water worldwide. Permapave products are sought after worldwide and continue to provide solutions to increasing environmental problems.

Permapave manufactures a unique range of products which provide ecologically sound Permapave manufactures a unique range of products which provide ecologically sound solutions.solutions.

•Permeable (porous) paversPermeable (porous) pavers•Storm water filtration gratesStorm water filtration grates•Bio-retention systems for storm water runoffBio-retention systems for storm water runoff•Roof PaversRoof Pavers•Deck Top PaversDeck Top Pavers

Permapave ProductsPermapave Products

Permeable PaversPermeable Pavers

• Flow through rates of up to 1.5 gallons/sec flow through per Flow through rates of up to 1.5 gallons/sec flow through per square footsquare foot

• Trafficable up to light commercial vehiclesTrafficable up to light commercial vehicles• Exclude 100% of gross pollutants from entering the storm Exclude 100% of gross pollutants from entering the storm

water systemwater system• Made from 100% stone – very unique and decorativeMade from 100% stone – very unique and decorative• Unaffected by UV – Ultra Violet RaysUnaffected by UV – Ultra Violet Rays• Exceeds standards for porous concrete or porous asphaltExceeds standards for porous concrete or porous asphalt• Easily maintained, and easily cleaned by vacuum extractionEasily maintained, and easily cleaned by vacuum extraction• Non-slip and safe for pedestrian, bicycle or vehicular trafficNon-slip and safe for pedestrian, bicycle or vehicular traffic

Sidewalks and PathwaysSidewalks and Pathways

•Provides a clean and safe surface for pedestriansProvides a clean and safe surface for pedestrians

Permeable Paver ApplicationsPermeable Paver Applications

Permeable GratesPermeable Grates

Storm Water Drainage SolutionsStorm Water Drainage Solutions

•Permapave storm water grates keep gross pollutants above the surfacePermapave storm water grates keep gross pollutants above the surface

Permeable GratesPermeable Grates

•Permapave storm water grates keep gross pollutants above the surfacePermapave storm water grates keep gross pollutants above the surface

•Porous surface allows for free flow of air and water to root systems of urban trees. Porous surface allows for free flow of air and water to root systems of urban trees.

Permapave Green RoofsPermapave Green RoofsThe New CITI Field in Queens, N.Y. Home of the NY MetsThe New CITI Field in Queens, N.Y. Home of the NY Mets

Chicago DOT: Green Alley ProjectChicago DOT: Green Alley Project• Chicago is working to incorporate Green Chicago is working to incorporate Green

principles in their network of 2,100 miles principles in their network of 2,100 miles of public alleys.of public alleys.

• The goal is to allow 80% of the rainwater The goal is to allow 80% of the rainwater falling on alley surfaces throughout the falling on alley surfaces throughout the year to pass through permeable paving year to pass through permeable paving back into the earth, thereby reducing back into the earth, thereby reducing localized flooding, localized flooding, recharging groundwater and saving recharging groundwater and saving taxpayer money that would otherwise be taxpayer money that would otherwise be spent treating stormwater.spent treating stormwater.

• PermaPave was a key component of the PermaPave was a key component of the Pilot programs to address Stormwater Pilot programs to address Stormwater Management. It was used for tree grates, Management. It was used for tree grates, diagonal parking pavement and back diagonal parking pavement and back alleys prone to flooding and where alleys prone to flooding and where pervious asphalt failed.pervious asphalt failed.

Alley with impermeable pavement and poor drainage.

Chicago DOT: Green Alley ProjectChicago DOT: Green Alley Project

Chicago DOT: Chicago DOT: Green Alley ProjectGreen Alley Project

Lumi-Coat is a highly advanced photo luminescent coating exhibiting significantly greater emitting properties than existing PL products with an exponentially longer emitting period. This powerless and environmentally friendly product tremendously improves and enhances existing emergency egress and safety marking systems, backup lighting and guidance systems as well as a host of other related applications utilizing PL technology .

Results DataLumiSystems : ASTM Report November 2005 Jalite : Jalite Marketing Materials November 2005 3M : 3M ASTM Test on web site Honeywell : Honeywell DIN Testing

Lumi-Coat Competitive Matrix Using an Xenon-arc light source and while providing a luminance of 1000lx for 5 min Chart exhibits Brightness after 10, 60 and 90 Minutes

Applications

-Illuminate exit signs, stair locations and exit paths in case of power failure or low visibility from heavy smoke.

-Fronts of steps to define the stair step rise.

-Archways, walls, floors, dark passageways, paths, garden steps and driveway edging to define edges and entrance/exits.

-Illuminates statues, monuments, patios and children’s play equipment.

-Painted on house numbers using stencils to highlight address.

-Continuous concrete garden edging emits light throughout the yard.

-Around edges and/or walls and floors of swimming pools to define edges and display unique design in the pool.

-Underground car parking garages where light emitting lane, parking, exit and directional markings can be used.

-Illuminate concrete barrier posts, wheels stops, parking stops, street of walking trail sings.

-Marine signage, buoy and shipping channel signage.

Attributes

-Stores light energy throughout the daylight hours and then gradually releases that energy as visible light throughout the night.

-Non-hazardous organic, water borne product.

-Available as a brush, roll or spray-on coating.

-Lumi-Coat is proven more visible than standard lighting in the presence of smoke.

-Cost savings over normal illumination.

-Exceeds the most stringent ASTM International standards by 148 times.

-Increases safety where there is no or limited light.

-Lumi-Coat illuminates over 12 hours – all through the night!

LED LIGHTINGLED LIGHTING

Energy efficient

Can not run in cold temps

Poor color

Emits UV

Annoying hum

High cost vs. incandescent

Contains mercury

Fragile

Solid state light classification Light emitting diodeRugged durabilityNo fragile filament No fragile tubeResistant to heat, cold, and shock

LEDs are more colorfulRange from warm to daylight

LED light bulbs work in silence LEDs are incredibly safe

90% light vs. 10% heat LED light bulbs are focused LEDs are the best for dimming

Keep there color LEDs are instant on LED emit no UV and are Mercury free

Extended through 12/31/13Benefits available from 1/1/06 thru 12/31/13Incentivized areas:LightingHVACBuilding envelopeAvailable for New Construction and Existing BuildingsAlso available for:Tenant owned lease-hold improvementsPrimary Designers of Government Buildings

247

• Convert most energy to IR

• Less than 10% is converted to perceived light

•Convert higher proportion of power to perceived light

•Still only 20% is converted to perceived light

Incandescent Fluorescent

LED Bulbs are 100% perceived light

In perspective: At 24 hours a day and 7 days a week 100,000 hours would roughly be 11 and a half years.

11.5 YEARS24/7

• LED Lighting is here and available– It saves money– Controllable with no adverse effects– Instant on/off

• Quality is important, especially when figuring if a driver is going to last as long as a LED. This may be the biggest challenge when searching for a LED Product.• LED lighting delivers a clean pure white look upon installation.

Thank you for your interest in Verigreen’s products, for more information please visit the following websites:www.verigreeninc.com

You can also contact us via mail or by phone:575 Underhill Blvd.Suite 125Syosset, NY 11791

p.516-584-2110f. 516-470-1823