Upload
emtek-llc
View
35
Download
0
Embed Size (px)
Citation preview
V100 Controller Now Compatible with Laser Particle Counters
Both laser particle counters and microbial air samplers are critical tools used for determining the quality
of the air in clean room and other environments, as well as compressed air and gas systems. But the two
pieces of air sampling equipment have very different methods of operation, and offer different
environmental data for the user. For this reason, most critical environments require the combined use
of the two types of devices to assess the status of those environments, or systems.
To better understand why you need both devices for effective air sampling in your facilities, here’s a
brief overview of what makes them similar and different:
Differences
Laser particle counters (LPCs) allow for a total count of
the particulates in a given air volume of both ambient air
and compressed air and gasses. The total count given
includes both viable and non-viable (microbes)
particulates, but does not differentiate between the two
sources. LPCs also categorize by size, with many
common particle counters offering particle channel
sizing from 0.3 to >15 micron particle sizes. LPCs also offer a variety of sample rates, ranging from 0.1
liters per minute (LPM) to 100 LPM. Microbial air samplers, on the other hand, asses the viable, or
microbial particulates, in the air, not the raw total particulates.
There’s also a big difference in terms of time to result. Laser particle counters can deliver results almost
instantly, while microbial air samplers require two to seven days of incubation time before a result can
be delivered. LPCs help cover the gap in time while you are waiting on results from the microbial air
samples, since they immediately offer results on the total load of particulates in your environment. If
trended over time, these results can quickly tell you if your environment, or system is in a normal state
of control and within appropriate limits for operations to occur (e.g., HVAC system is operating correctly,
equipment is not malfunctioning and shedding unwanted materials, etc.)
Similarities
There are quite a few similarities shared between many popular laser particle counters and EMTEK’s
V100 Controller, which operates its’ microbial air samplers (e.g., R2S, RAS, and RCG). Most 1 CFM (28.3
LPM) to 100 LPM Portable LPC’s and the V100 Controller, provide vacuum to a remote sampling device
(probe, or air sampler), allowing for remote monitoring of critical areas, such as ISO 5 Filling Lines,
Isolators, etc.. This minimizes risk of contaminating that environment, and allows for closer placement
of the probe, or air sampler to the critical sampling location (e.g., by filling needles, stopper bowl,
capping station, etc.), while the controller/vacuum source can be well outside of the critical zone.
Additionally, the EMTEK V100 Controller offers similar flow rates to the most popular LPCs on the
market, with flow rates of 28.3, 50, and 100 LPM, allowing for the collection of the same sample volume,
in the same time period, as the LPCs.
EMTEK has also assured their devices offer plenty of
flexibility in terms of programmed collection times,
and onboard options. As with most popular LPCs,
EMTEK’s V100 controller, along with the various
sampling head options (the R2S, RAS, and RCG),
allows for substantial programmability with user
specified sample delay, sample run, and sample hold
times, as well as control of total sample volume or
time. Additionally, as is common with LPCs, an on-
board thermal paper/label printer is included to
output all the key sample parameters, that may be affixed to your test media, or attached to your
sampling documents, for easier data transfer, and significantly better data traceability when compared
to other microbial air samplers.
As required by most firms, and regulatory agencies, a complete air sampling program includes both
viable (microbial) and non-viable (total particulate) test equipment to monitor and control your critical
environments, or systems. Having compatible monitoring devices, which have similar programmable
collection functions, flow rates, etc., substantially simplifies your sampling plan with great gains in
efficiency, allows you to keep proper environmental control, and meet regulatory guidance.
For more information, please visit www.emtekair.com or contact us at 877.850.4244.