How the first draft T-shirt was made

As the company I was making an order from could not deliver a sample in time for the photo shoot I decided to print one myself. Initially I had planned just print this

image off in photoshop as a draft first and then on to the print paper after.

But when I did so the images came out pixelated because I had originally made the logo on a smaller canvas size so it could not be blown up that much. So had to

remake the logo again but I chose to do it in InDesign this time as I had remembered being told that was the better software to print in.

After re making the logo I realized that it was not written mirrored which is how I would need to print on to the t-shirt as the image I created first shows.

I found out that by changing that percentage to minus 100% it revereses the image making it look mirrored it was also possible by selecting the text and with the size

locators dragging it across passed the image into minus but this meant you could not achieve the exact same size as you had it before which made the first way more

reliable.

After I had done this and decided on the size that I wanted, along with this process I was constantly printing onto paper trying to work out the sizes that I wanted on the

t-shirt.

The logo was printed out and to test that the paper worked well and work out how to do it I used a old t-shirt to iron on a couple prints before I did it on a brand new t-

shirt which I am glad I did because it mean the final product came out better.

After going through the test process I was ready to do it on the final piece.

The product doesn’t look like it will when the bulk order is made as they will be embroidered on to the t-shirt but this gives the consumers a idea of how the product

is going to look and myself as the brand owner.