Embed Size (px)
Citation preview
We know how to connect
TESTDESIGN DEVELOP SIMULATE MANUFACTURE TEST
DESIGN, MANUFACTURE & TEST
In order to compliment our existing services and internal tester hardware resources, we are now pleased to announce the addition of a V93000 C-Class test system. As a supplier of test hardware, we understand the need for high performance testers to be 100% compatible between development and production.By selecting the C-Class V93000 there are adequate resources to facilitate a highly efficient multisite test architecture and advanced instruments to support complex system on chip (SoC) products.
The Synergie-CAD V93000 combines the high speed & large memory depth digital pins with superior speed & performance analogue, and newly developed high density power supplies. For more information, please email [email protected]
“Supporting customers on V93000”
http://www.synergie-cad.com
MBAV8+ : LF,HF and VHF Mixed Signal communications including LTE Advanced, 802.11ac, WiMAX
DPS128 : DC Scale DPS128 High voltage and High Current power with fast sequencer control.
PS1600 : Digital 1.6G 1mV accuracy universal pin.
The C-Class Smart scale 712 pin tester is based at our facility in Munich and has been loaded with the following instruments;
Synergie-CAD offer test development support, test access or manual test services on this additional test system and consider it to be an Engineering resource with flexible architecture, good accessibility and fully licensed instrumentation.
EUROPE
Toulouse FRA
Munich GER
Milan IT
Casablanca MAR
Lincoln UK
Colombe FRA
Meyreuil FRA
Carros (Headquarter) FRAASIA
Seoul KOREA
Hsin chu TAIWAN
Muntinlupa PHILIPPINES
Singapore
USA
Dallas TEXAS
DESIGN DEVELOP SIMULATE MANUFACTURE TEST
DESIGN, MANUFACTURE & TEST
We design and manufacture high density probe cards (pad pitch down to 35um) for numerous markets including Logic, Microprocessor, Memory, RF and Imaging devices. By combining PCB design and probe assembly technologies we minimize resistivity and noise in testing up to to 10GHz.
Our team of qualified engineers and technicians are at your disposal for burn-in boards design. We also offer a new leading edge universal driver solution with micro-Processor control which is fully software and hardware configurable. A desktop characterisation version is also available.
With our in-house Advantest and Teradyne tester platforms we aim to support customers hardware verification, test program development and test platform transfer. Working closely with the Probe card team we have access to 200mm wafer probe handlers, (300mm in June 2016). ATE Systems are available for customers to access, supported development or remote access.We can support Qualification & Characterisation electrical testing.
QualificationTestWafer Probe ManufactureWith seven Engineering design centres based throughout Europe, Asia and USA, we manufacture and build controlled impedance multilayer boards and Micro BGA PCB down to 0.3mm pitch. PCB operating temperature from -55degC to 250degC and frequencies above 20GHz.
http://www.synergie-cad-test.fr
http://www.synergie-cad.frhttp://www.synergie-cad-probe.fr
http://www.synergie-instruments.it
