Simulation of Eye diagramUsing LTspice

Bee Technologies Inc

http://www.bee-tech.info/

1All Rights Reserved Copyright (C) Bee

Technologies Inc.2010

Simulation Circuit

2All Rights Reserved Copyright (C) Bee

Technologies Inc.2010

.OPTIONS “baudrate”

• Add .options “baudrate” for enable eye diagrams on the schematic.

Set “Baudrate” = {1/PER} / 1Bit in 1Baud

3All Rights Reserved Copyright (C) Bee

Technologies Inc.2010

Simulation Settings

[*10] to run show number of eye and

adds [1.2ns] are delay [s]

4All Rights Reserved Copyright (C) Bee

Technologies Inc.2010

Plot Settings> Eye Diagram> Enable

Select “Enable”

5All Rights Reserved Copyright (C) Bee

Technologies Inc.2010

Delay[s] and No. of eyes settings

Right click on plot to change

6All Rights Reserved Copyright (C) Bee

Technologies Inc.2010

Simulation Circuit

7All Rights Reserved Copyright (C) Bee

Technologies Inc.2010

Simulation Result

No. of eyes = 1

No. of eyes = 10

No. of eyes = 1

C Respond

8All Rights Reserved Copyright (C) Bee

Technologies Inc.2010