Upload
nolene-fuhri
View
195
Download
0
Tags:
Embed Size (px)
DESCRIPTION
www.mcwhit.co.za
Citation preview
We proudly present to Mozambique a partnership between
McWhit – Proud distributors for UniTwist and ProClose
UNITWIST & MCWHIT
What makes UniTwist Unique?Extremely easy to use – Quick Installations few tools
needed
Unbelievably well priced SOUTH AFRICAN & INTERNATIONAL PATENT
The ONLY PUSH-FIT COMPRESSION Fitting
Having the benefits of Both a Push-fit
And Compression Fitting- LEAK-PROOF!
Withstands 1000kgs of pressure And 100 Degrees of boiling water
IT HAS NO STREET VALUE
Quick, simple & innovativeCut the desired pipe length by Making a clean straight cut (90
degree angle). This is easily done using a pipe cutter or tool of choice.
Push pipe into fitting until you cannot see the mark or until the pipe is fully seated, hand tighten nut clockwise and then finish off
with a tool of choice.
Turn nut anti-clockwise one full turn to allow the grip ring to open up
allowing the pipe to be pushed into the fitting.
Mark the pipe 3.5cm from the end of the pipe. Push the pipe into the fitting mouth until it stops. The mark should not be available.
STEP 1
STEP 2
STEP 3
STEP 4
UniTwist is an SABS approved system
UniTwist can be used for HOT and Cold water
UniTwist’s unique compression action means even Scratched pipe is no match for UniTwist
If there is a leak- Just Tighten.
UniTwist is RE-USABLE
UniTwist with a Polycop combination
UniTwist Applications
OUTSIDE INSTALLATION
SHOWER INSTALLATION WITH PRO-CLOSE STOP TAP
TOILET & SHOWER INSTALLATION
UniTwist Applications
TOILET INSTALLATION
UniTwist is Compatable with most Pipes, including PVC, Copper and Polycop
UniTwist is compatible with both multi and monolayer PEX, PP-R and copper pipe or any pipe with imperial ½" or ¾" outer diameter.
1 size fits ALL
moves UP and DOWN
SUPER-STRONGBendable Legs
• 1 Fits 15mm and 16mm Pipe• 1 Fits 20mm and 22mm• Patented Design• Virgin Material means Legs can
bend without breaking!!• Metric and Imperial sizes are no
longer a problem
UniTwist Unique Patented Design
Extremely strong and Durable PPR NUT
304 stainless steel Grip Ring
Spacer
Compression O-Ring
McWhit is also proud to offer the completely new & unique
What makes PRO-CLOSE so Unique?
NO STREET VALUEVALUE FOR MONEY- Quality
& inexpensiveDESIGNED FOR HOT AND
COLD WATER USEUNSTRIPPABLE AND
EXTREMELY DURABLEMADE IN AFRICA FOR
AFRICA
NO STREET VALUE
NO MORE LOCKING UP & CAGING AWAY YOUR TAPS!!PRO-CLOSE is better than Brass Taps because:
Brass Taps are about 70% more expensive than Composite taps and Brass Taps sacrifice on average about 30% of their Brass Material to save costs, making for POOR Quality.
Scrap value for Brass taps are increasing all continuously, this causes the theft and selling of Brass to increase and its only getting worse.
Generally, when stolen, Brass taps are Smashed off with a Hammer and this causes water leakages and spillage and often this costs the government Millions every year!
WHAT MAKES PRO-CLOSE DIFFERENT?
MADE & PATENTED IN SOUTH AFRICA AND PROUD TO BE A WORLDS FIRST!
MADE FROM HIGH QUALITY ASYTLE MAKING PRO-CLOSE SUPER STRONG!!!
SMART DESIGN MEANS WASHER DOESN’T COMPRESS AND LASTS LONGER- NO LEAKING!
BUILT IN CLUTCH ACTS AS WATER HAMMER ARRESTOR- NO DAMAGE TO PIPES AND TAP!!
PRO-CLOSE RANGE
We Thank you For your Time
Contact details:
Damien Mclintock:
Cell: +27 82 3785 939
Email: [email protected]
Alan Whitaker:
Cell: +27 79 2993 481
Email: [email protected]
www.mcwhit.co.za