7
BGMEA University of Fashion & Technology Course Name: Testing of Textiles Course Code : Tex 2104 Subject: Assignment Submission on Needle settings of Single Jersey fully-fashioned, Single Jersey Stripe tube rib fully- fashioned, Drop Stitch fully-fashioned, Honeycomb/Pineapple fully-fashioned. Submitted to Md. Ramij Howlader Lecturer Department of Textile Engineering BUFT. Submitted By Id No. Name 131-107-0-145 Tofail Haque

Needle settings of single jersey fully fashioned, single jersey stripe tube rib fully-fashioned, drop stitch fully-fashioned, honeycomb pineapple fully-fashioned

Embed Size (px)

Citation preview

BGMEA University of Fashion & TechnologyCourse Name: Testing of TextilesCourse Code : Tex 2104

Subject: Assignment Submission on Needle settings of Single Jersey fully-fashioned, Single Jersey Stripe tube rib fully-fashioned, Drop

Stitch fully-fashioned, Honeycomb/Pineapple fully-fashioned.

Submitted toMd. Ramij Howlader

Lecturer Department of Textile Engineering

BUFT.Submitted By

Id No. Name131-107-0-145 Tofail Haque131-108-0-145 Syed Khalid Mahmud131-109-0-145 Saidur Rahman131-110-0-145 Touhid Alam131-111-0-145 Ulfat Jahan Purobi131-112-0-145 Md.Sajjadul Karim Bhuiyan131-114-0-145 Shakib Siddique

Testing of Textiles (Lab)Experiment No. 05Experiment Name: Study on Needle settings of Single jersey fully-fashioned, Single Jersey Stripe tube rib fully-fashioned, Drop Stitch fully-fashioned, Honeycomb/Pineapple fully-fashioned.

Introduction : Fully fashioned knitting cuts down on the amount of material required to make a garment by eliminating selvedge, the remnants that would be left after cutting from a rectangular fabric sheet. For example, a sweater requires at least four pieces of fabric: two sleeves, the front piece, and the back piece. Prior to fully fashioned machine techniques, a full sheet of material would have to be produced, each of the four pieces would be cut out, and the remaining fabric would be discarded. With full-fashioning, the machine produces only the four required pieces.

The necessary techniques for changing the fabric width or diameter are achieved by:

1. changing knit structure (e.g. rib to interlock)2. varying the structural elements (stitch length, weft insertion, knit, tuck,

float)3. shaping through loop transfer4. wale fashioning by 'needle parking,' and5. Segmented takedown for varying rates of takedown across the width of the

fabric.

Objectives: To determine needle settings of S/J Sweater. To determine needle settings of S/J Stripe tube rib Sweater. To determine needle settings of Drop stitch Sweater. To determine needle settings of Honeycomb/Pineapple Sweater.

1. Name of the Fully-Fashioned: Single Jersey Fully-Fashioned. Properties:

1. Elasticity is good.2. Comparatively soft.3. It is mandible.4. Manufacturing by using only T/F needle bed.

Needle Settings:

2. Name of the Fully-Fashioned: Single jersey stripe tube rib fully fashioned.

Needle Settings:

3. Name of the Fully-Fashioned: Drop Stitch fully fashioned.

Needle Settings:

4. Name of the Fully-Fashioned: Honeycomb/Pineapple fully fashioned.

Needle Settings: