Warm Welcome

Introduction

SETU VGFXMulti-port VoIP-GSM-FXO-FXS Gateway

Gateway offering seamless connectivity between VoIP, GSM, FXO and FXS networks

Gateway offering VoIP and GSM network connectivity to traditional PBXs

Gateway offering GSM and FXO network connectivity to an IP PBX

Gateway offering networking and universal call routing

SETU VGFX

FXO Ports GSM/3G Ports FXO Ports FXS Ports

VGFX8422 8 4 2 2

VGFX8440 8 4 4 0

VGFX8404 8 4 0 4

Variants

Target Customer

Applications

POTS

GSM

SETU VGFX

FXS

VoIP

TWT

Stand-alone Application

IP

GSM/3G

IP

Make cost-effective calls over VoIP

Save on fixed to mobile call cost

Maintain existing PBX infrastructure and dialing habits

Reduce dependency on a single network to make calls

SETU VGFXTDM PBX

Existing Infrastructure

Users

VoIP-GSM Gateway for TDM PBX

Have access to legacy PSTN network

Make GSM calls from analog phones

Deployable in all sip based VoIP networks

PSTN

SETU VGFXIP PBX

Existing Infrastructure

IP

Users

GSM/3G

VoIP-GSM Gateway for IP-PBX

Make IP calls without involving any SIP proxy server

Make free calls between multiple branch offices over IP

Short dial codes for 500 IP extensions , no need to remember IP addresses

SETU VGFX

Location A Location B

User dials 505

IPSETU VGFX

TDM PBX

Ext 202TDM PBX

Ext 505

Peer-to-peer Application

Paris

Sidney

MumbaiMake Calls to Multiple

Office Locations Over IP

Access Local PSTN Network of Paris Office From Sidney

IP

Access GSM Network of Mumbai From Sidney

Make Calls to Teleworkers Any Where In World Over

IP

PSTN

SLT

Employees working from Home

Teleworkers

GSM/UMTS(3G) NetworkGSM/3G Mobile

Extensions

Mobile Workers

Multi-Site Network Connectivity

Conventional Internet

connection

Access high speed internet over 3G/HSPA/EDGE

Take benefits of 3G/HSPA data plans offered by various service providers

Ideal for locations where there is no wired internet connectivity available>

>>

Internet network gets down

SETU VGFX

LAN Users

Internet3G/ HSPA/EDGE

Internet Accessibility over 3G/HSPA

Software Features

Access Codes

Allowed and Denied Numbers List

Auto Provisioning for Mass Deployments

Auto PSTN Fallback

Automatic Number Translation

Call Transfer (Attended/Blind)

Call Detail Records

Call Progress Tone and Rings

DHCP Server and Client

Do Not Disturb

Dynamic DNS

Emergency Number Dialing

Hotline

Internet Access over 3G/HSPA

Message Wait Indication

Peer-to-peer Calling

Port Forwarding and DMZ

SIM Balance Inquiry and Recharge

SNMP Monitoring

TLS and SRTP Support

VLAN Tagging

PBX Functionality Call Hold Call Transfer Call Forward Call Pickup Conference

Features

Allow or deny dialing of predefined outgoing numbers.

Avoid misuse and restrict unproductive calls

Program separately for VoIP, GSM, FXO and FXS ports

Call Detail Record (CDR) Monitor and keep record of incoming and outgoing calls

Analyze calls with parameters like Call Duration, Calling Number, Port Type

Store details of 2000 calls

Download and print the call detail records - as and when required

Calls can be filtered on the basis of different Ports, Date, Day, Time, PIN Number,

Called and Calling Party, etc.

Allowed and Denied Numbers

Translates the number to match with numbering pattern of the destination network

Dial without worrying about the network through which the call will be routed

Supported on VoIP, GSM, FXO and FXS ports

SETU VGFX

SETU VGFX adds +91 before dialing it out.

User dials 23551111

GSM/3G

Automatic Number Translation

PSTN

In case of IP outage, IP calls automatically get routed through PSTN

Provides continuous accessibility of network

Reduces dependency on IP

More reliable communication

IP gets down

User dials 201

IP

Ext. 201

User

SETU VGFX

Call automatically gets routed through PSTN

Auto PSTN Fallback

Different countries have different tones to indicate the process of call

activities such as Dial Tone, Ring Back Tone, Error Tone, Busy Tone, etc.

Specific cadence can be programmed to match the tone used in each country

call progress tones can be programmed country wise or can be customized as

per the user requirement

Call Progress Tones and Rings

Built-in feature

3-Party conference

Applicable if the call is originated from and terminated on FXS port

External and internal parties are possible

Conference

Display calling party’s name and number on FXS Port

Supports CLI on FXO, Mobile and SIP ports

CLIP on call transfer

Digest Authentication Ensures secured communication over IP

Allow or restrict calls between specific group of users

Automated authentication mechanism

Caller Line Identification

Daylight saving is the procedure of setting clocks ahead at a particular time of

the year to make way for additional hour of daylight in the evening

Real Time Clock (RTC) moves backward or forward automatically in tune with

the daylight saving requirement of the country

DST can be forwarded or set backward according to day-month wise or date-

month wise as per the requirement

Day Light Saving

Do Not Disturb (DND) feature enables user to have privacy of not receiving the calls

for particular time period

Outgoing calls can be made when Do Not Disturb (DND) is enabled

Applicable on FXS ports

Do Not Disturb

Allows the caller to contact local emergency services

Program up to 5 emergency numbers

Emergency number assigned on mobile port can be dialed out even if the port is not

registered or a SIM card is not present

Emergency Number Dialing

Toll Quality Voice with all Industry Standard Codecs Support

G.711 A-Law, µ-Law, G.723, G.729AB, GSM-FR Support

Voice Activity Detection (VAD) Offers Proper Bandwidth Utilization

Comfort Noise Generation (CNG) and Echo Cancellation Ensures

Superior Voice Quality

Enhanced Voice Quality

Send and Receive Fax using Efficient Media like Internet & ISDN BRI

T.38 Fax and Pass -Through for FoIP

ISDN G3 Fax

FAX over IP

PIN Authentication is to authenticate a caller to prove identity to proceed the call

from one network to another

Supported on FXO, GSM and VoIP ports

Support 500 PIN authentication entries

PIN Authentication

Hotline is supported on FXS ports

Each FXS port can have different hotline number

Provision to impose delay before hotline activation

Delay timer can be minimum 1 and maximum 9 seconds

Hotline

Different service providers have different tariffs for different regions and countries

System automatically selects the most economical route to place the call

Route selected depends on the destination number dialed

Ensure each call at least possible cost

Least Cost Routing

Provides quick and easy information of voice message

Visual and tone based indication:

Message wait LED indication on DKP and SLT

Shuttered dial tone

Voice message before dial tone

ITSP/PBX User Voice mail box

Voice message indicator blinks

Message wait tone

User SETU VGFX

Message Wait Indication

Enables to choose GSM network automatically and manually

Each GSM port can be programmed for specific service providers network

Each GSM port can be assigned priority of maximum 9 networks if set on manual

mode

Network Selection

301

234

Ext no. 301 dial number

Called party is busy or no replying

System stores called party’s no., calling party’s no. with its

extension no.

When the user calls back, call gets routed to the original extension

Call attempted from mobile port of SETU VGFX is not answered or found busy

System keeps the record in the database from which FXS port the number was dialed

to called party number

System detects called party number on the returned call and will route the call to

original caller who had attempted to call

Return Call to Original Caller

Date and time are very important parameters for some features like Call Detail

Record (CDR), Daylight Saving Time, etc.

Real time clock uses the Simple Network Time Protocol (SNTP) to get time from the

time server

Flexibility to choose one from three pre-configured free reliable time servers

Flexibility to program time server address of their preference

Real Time Clock

System log protocol is used for sending debug messages on IP network

It is a Client/Server protocol

Uses UDP as transport protocol for debugging process

Logging has several benefits

Easier and faster troubleshooting

Security enhancement

Better system administration

System Log

SIM PIN is used for security on GSM network to protect the data stored on SIM

card

PIN (Personal Identification Number) is stored in SIM

If PIN is programmed, network asks user to provide PIN on every power on

SIM PIN Number can be minimum 4 and maximum of 8 digits

SIM PIN

SPECIFICATIONS

Description SETU VGFX8422 SETU VGFX8440 SETU VGFX8404

Number of VoIP Channels 8 8 8

Number of GSM/3G Ports 4 4 4

Number of FXO Ports (RJ11) 2 4 0

Number of FXS Ports (RJ11) 2 0 4

WAN Port 1 1 1

LAN Port 1 1 1

GSM /3G Band Tri Band and Quad Band Operation

Power Supply External Adaptor 12VDC/1.25A (Universal Input Range 90-265VAC, 47- 63Hz)

Power Consumption 12 Watt (Maximum)

RF Sensitivity Better than -102dBm

LED Indications Power Supply, FXO/FXS – One per Port, GSM – One per Port

Dimensions (W x H x D) 23.0 x 5.5 x 16.3 cms (9.1”x 2.2”x 6.4”)

Unit Weight 1Kg with Wall Mount and Table Top

Specifications

SETU VGFX Multi-Port SIP based VoIP to GSM-FXO-FXS GatewaySETU VGB Multi-Port SIP based VoIP to GSM and BRI GatewaySETU VFXTH Multi-Port SIP based VoIP to FXO-FXS GatewaySETU VFX Multi-Port SIP based VoIP to FXS Gateway

SETU ATA211GSIP based Analog Telephone Adaptor with 1 FXS, 1 GSM and 2 Ethernet Ports

SETU ATA211SIP based Analog Telephone Adaptor with 1 FXO, 1 FXS and 2 Ethernet Ports

SETU ATA2S SIP based Analog Telephone Adaptor with 2 FXS Ports and 2 Ethernet Ports

SETU ATA1S SIP based Analog Telephone Adaptor with 1 FXS Port and 2 Ethernet Ports

Matrix GATEWAY RANGE OF PRODUCTS

Type of Presentation: Product Presentation Number of Slides: 35 Revised On: 1st March 2013 Version-Release Number: V1R2

For Further Information Please Contact:

Email ID: Info.Telecom@MatrixComSec.com

Visit us at www.matrixcomsec.com