Levelling Feet by GMT

Levelling Feet Range

Levelling Feet Range2

Index

Introduction—Specify your own levelling feet 3

Foot Plates polyamide / steel / zinc alloy 4—5

Foot Plates stainless steel 6—7

Foot Plates—hygienic standard stainless steel 8—9

Spindles zinc plated steel 10—11

Spindles stainless steel 12—13

Foot Plates self aligning—standard / heavy duty 14—15

Spindles self aligning 16—17

Levelling Feet eco-series 18—19

End Caps square 20—21

End Caps round 22—23

Levelling Feet for all needs pictorial overview 24

Contact GMT 25

Levelling Feet Range 3

GMT offer a wide variety of combinations of levelling feet for customers tospecify. Spindles can be combined with every type of threaded foot plate.*

Foot plates in re-inforced polyamide, steeland stainless steel

Spindels from stainless steel (AISI 304) orzinc plated steel

Oil and water resistant properties

Medical, food and hygene standardapproved levelling feet available

Steel feet available for increased load ca-pacity

Obtain the sound damping insert devicefrom the footplate

Turn in the thread of the spindle

Lower the spindle in the footplate

Put back the ultrasound silencing devicein the foot plate

In a matter of seconds you have assem-bled a levelling foot which meets the re-quired parameters exactly.

Specify your own levelling feet

Flexibility in terms of sizes and materials

Usually available from stock

Noise/sound proofing where required

High load capability

Self-aligning levelling feet available

Advantages

Materials

Assembly

* Except for self-aligning levelling feet.


STL = Steel Finish, HQZ = High Quality Zinc alloy finishFoot Plates ø 80, 100, 120mm also available with drilled holes for ground fixings.

Foot Plates polyamide

Foot Plates steel / zinc alloy

Product Code D(mm)

d(mm)

Load(daN)

GroundFixings

LEVEL-STD2163-F01 30 - 500

NoLEVEL-STD2163-F02 40 -

LEVEL-STD2163-F03 50 -

LEVEL-STD2163-F04 60 -

1000LEVEL-STD2163-F05 80 55

YesLEVEL-STD2163-F06 100 74

LEVEL-STD2163-F07 120 94

900

Product Code D(mm)

Load(daN)

Finish GroundFixings

LEVEL-STD2163-F10 30

3000

HQZ

NoLEVEL-STD2163-F11 40 HQZ

LEVEL-STD2163-F12 50 HQZ



NoLEVEL-STD2163-F15 100 HQZ


Representation of polyamide foot plate without ground fixings.ø 30, 40, 50 and 60mm

Representation of polyamide foot plate with ground fixings.ø 80, 100 and 120mm

30

D

d

30

D

30

D

30

D

Representation of foot plates ø 30, 40, 50, 60, 80, 100 and 120mm

4

3

GMT offer a wide range offoot plate sizes and materials.

The spindels shown on pages10 to 13 can be mated withany foot plate to provide therequired combination of level-ling foot.

Parts are normally availablefrom stock to ensure quickavailability.

Foot Plates

GMT foot plates are availablein re-inforced polyamide, highquality zinc alloy, steel orstainless steel (AISI 304).

The sound absorbing rubbermaterial is oil and water resis-tant to ensure product lon-gevity in cases of contamina-tion of the foot plates.

Material

GMT foot plates have beendesigned for loads up to 500,900, 1000 and 3000 daN.

The sound absorbing/damping rubber material hasa hardness of 70 Shore A.

Properties

5Levelling Feet Range


Foot Plates Stainless Steel

Product Code D(mm)

Load(daN)

GroundFixings


3000 No







30

D

30

D

Representation of stainless steel foot plates ø 30, 40, 50, 60, 80, 100 and 120mm

AISI 304

6

3

GMT offer a wide range offootplate sizes and materials.

The spindels shown on pages10 to 14 can be mated withany foot plate to provide therequired combination of level-ling foot.

Parts are normally availablefrom stock to ensure quickavailability.

Foot Plates

GMT foot plates are availablein re-inforced polyamide, highquality zinc alloy, steel orstainless steel (AISI 304).

The sound absorbing rubbermaterial is oil and water resis-tant to ensure product lon-gevity in cases of contamina-tion of the foot plates.(Note: Refer to pages 4 and 5for more foot plates)

Material

GMT foot plates have beendesigned for loads up to 500,900, 1000 and 3000 daN.

The sound absorbing/damping rubber material hasa hardness of 70 Shore A.

Properties



Hygienic Foot Plates Stainless Steel

Product Code D(mm)

h(mm)

H(mm)

Load(daN)

GroundFixings

LEVEL-STD2163-F30 60 8 37 700

LEVEL-STD2163-F31 80 8 37 700

LEVEL-STD2163-F32 100 8 37 700

No

AISI 304

8

Hygienic quality foot plates can becombined with many lengths andtypes of spindles which can befound on pages 10 to 13.

Representation of GMT hygienic footplate manufactured from a Thermo Plastic Elastomer (TPE) 70° Shore Ahardness with stainless steel upper - ø 60, 80 and 100 mm

3

GMT’s new stainless steel footplates have a unique sealedball/articulation connection.This guarantees optimumhygiene by way of a sealedcouple foot. As a result, theseleveling feet are particularlywell suited to environmentscontaining food or specialchemicals.

Available in 60, 80 and100mm sizes, these foot-plates can be combined with awide range of spindles. (referpages 10 to 13)

Foot Plates

Stainless Steel: AISI 304

Rubber: TPE 70° Shore A(Thermo-Plastic Elastomer)

Material

Rubber

UV resistant

Non-marking

US FDA Norm

Anti-bacterial

Properties



Spindles Zinc Plated Steel

Product CodeM

(mm)L

(mm) AF

LEVEL-STD2163-S01M8

40

14

LEVEL-STD2163-S02 80LEVEL-STD2163-S03

M10

45LEVEL-STD2163-S04 70LEVEL-STD2163-S05 90LEVEL-STD2163-S06 125LEVEL-STD2163-S07

M12

45LEVEL-STD2163-S08 66LEVEL-STD2163-S09 100LEVEL-STD2163-S10 125LEVEL-STD2163-S11 150LEVEL-STD2163-S12

M16

66


M20

85

22LEVEL-STD2163-S18 100LEVEL-STD2163-S19 125LEVEL-STD2163-S20 150LEVEL-STD2163-S21 200LEVEL-STD2163-S22 85

17*LEVEL-STD2163-S23 100LEVEL-STD2163-S24 125LEVEL-STD2163-S25 150LEVEL-STD2163-S26 200

M24

10

L

M

AF

Other Lengths are availableupon request

Spindle with zinc plated steelM = Spindle stud diameterL = Spindle lengthAF = Holding collar dimensionacross flats

Product CodeMaterial H

(mm)h

(mm)D

(mm)AF

(mm)M

(mm)

LEVEL-STD2163-S40 Zinc Plated Steel 22 7.5 15 14 M6i (x10)

LEVEL-STD2163-S41 Zinc Plated Steel 22 7.5 15 14 M8i (x10)

GMT Short Spindles are suitable for directly affixing foot plates by meansof standard inserts/attachments where levelling is not necessary.

Short Spindles Zinc Plated Steel

M

AF

H

h

D

* These spindles provide 2 flatsides instead of the usual 6(hexagonal)

3

GMT offer a large variety ofspindles in stainless steel orsteel finished with a zinc coat-ing.

Each spindle can be combinedwith a wide variety of footplates such as those listed onpages 4 and 6.

Parts are usually availablefrom stock. Consequently cus-tomers are able to specify thelevelling feet they require andobtain the parts quickly

Spindles

GMT spindles are made ofeither zinced coated steel orstainless steel

Material



Spindles Stainless Steel

Product CodeM

(mm)L

(mm) AF

LEVEL-STD2163-S50M8

40

14

LEVEL-STD2163-S51 80LEVEL-STD2163-S52

M10

45LEVEL-STD2163-S53 70LEVEL-STD2163-S54 90LEVEL-STD2163-S55 125LEVEL-STD2163-S56

M12


M16

66


M20

85

22LEVEL-STD2163-S67 100LEVEL-STD2163-S68 125LEVEL-STD2163-S69 150LEVEL-STD2163-S70 200LEVEL-STD2163-S71 85

17*LEVEL-STD2163-S72 100LEVEL-STD2163-S73 125LEVEL-STD2163-S74 150LEVEL-STD2163-S75 200

M24

L

M

AF

Other Lengths are availableupon request

Spindle with stainless steel AISI 304M = Spindle stud diameterL = Spindle lengthAF = Holding collar dimensionacross flats

AISI 304

12

Product CodeMaterial H

(mm)h

(mm)D

(mm)AF

(mm)M

(mm)

LEVEL-STD2163-S90 Stainless Steel 22 7.5 15 14 M6i (x10)

LEVEL-STD2163-S91 Stainless Steel 22 7.5 15 14 M8i (x10)

AISI 304 Short Spindles Stainless Steel

M

AF

H

h

D

GMT Short Spindles are suitable for directly affixing foot plates by meansof standard inserts/attachments where levelling is not necessary.

* These spindles provide 2 flatsides instead of the usual 6(hexagonal)

3

GMT offer a large variety ofspindles in stainless steel orsteel finished with a zinc coat-ing.

Each spindle can be combinedwith a wide variety of footplates such as those listed onpages 4 and 6.

Parts are usually availablefrom stock. Consequently cus-tomers are able to specify thelevelling feet they require andobtain the parts quickly

Spindles

GMT spindles are made ofeither zinced coated steel orstainless steel

Material



Foot Plates standard self-aligning

Foot Plates heavy duty self-aligning

Product Code(w/o sound damping)

D(mm)

Load(daN)

GroundFixings

LEVEL-ADJ2164-F01 60 450 No

LEVEL-ADJ2164-F02 80 500

LEVEL-ADJ2164-F03 100 600Yes

ø 60mm : Standard self-aligning foot plates fromreinforced polyamide are manufactured withoutground fixing holes.

ø 80 and 100mm : Standard self-aligning foot platesfrom reinforced polyamide are manufactured withground fixing holes.

Sound damping materialProduct Code

D(mm)

StandardSupplied

LEVEL-ADJ2164-D01 60



No

18

D

ø9Standard

22

D

ø14Heavy Duty

44

Product Code(w/o sound damping)

D(mm)

Load(daN)

GroundFixings

LEVEL-ADJ2164-F10 125 4500 Yes


D(mm)

StandardSupplied

LEVEL-ADJ2164-D04 125 No

ø 125mm : ‘Heavy Duty’self- aligning foot plates inreinforced polyamide aremanufactured with groundfixing holes.

14

The unique and varied assort-ment of GMT foot plates in-cludes both fixed and self-aligning types. The self-aligning foot plates availablecan take loads up to 4500daN.

The self-aligning foot platescan be combined with any ofthe available spindles whichare detailed on page 14.

Foot Plates

The steel ring reinforced poly-amide foot plates ensure highstrength.Sound damping material in-serts are available on request.

Material

GMT self-aligning foot platescan simply be changed into‘fixed’ foot plates upon tight-ening. The ‘heavy duty’ footplates can be loaded with asmuch as 4500daN.

Properties



Spindles self-aligning

Representation of self-aligningspindle with stainless steel (AISI304) or zinc finish.

M = Thread diameterL = Spindle LengthAF = Tightening collar

Zinc Steel FinishProduct Code

M(mm)

L(mm) AF

LEVEL-ADJ2164-S01

M12

66

22

LEVEL-ADJ2164-S02 100


LEVEL-ADJ2164-S04

M16

66






M20

Stainless SteelProduct Code

M(mm)

L(mm) AF

LEVEL-ADJ2164-S20

M12

66

22



LEVEL-ADJ2164-S23

M16

66






M20

L

M

AF

16



Foot Plates


Material


Properties



Levelling Feet eco-series

Eco Foot Plate Product Code(w/o sound damping)

D(mm)

Load(daN)

GroundFixings

LEVEL-ECO2165-F01 30

200LEVEL-ECO2165-F02 40

LEVEL-ECO2165-F03 50

No

The degree of angulationdepends upon the manner ofassembly.

Spindle Zinc CoatedProduct Code

M(mm)

L(mm)

AF

LEVEL-ECO2165-S01 M8 25

13








17









19







LEVEL-ECO2165-S23 M16 100 24

Spindle (zinc coated steel)M = Thread DiameterL = Stud lengthAF = Tightening CollarD = Foot plate diameter


D(mm)

StandardSupplied

LEVEL-ECO2165-D01 30



No

22

D

M

AF

18



Foot Plates


Material


Properties



End Caps Square

Product Code

Leg SizeB x B /thick-ness

M(mm)

B(mm)

b(mm)

L(mm)

S(mm) Load

(daN)

LEVEL-END2166-S01 30 x 301.5 thick

M1030 27.5 33 27

550LEVEL-END2166-S02 M12


M1030 26.5 33 27

LEVEL-END2166-S04 M12

LEVEL-END2166-S05

40 x 401.5 thick

M10

40 37.5 43 35

600




LEVEL-END2166-S09

40 x 402.0 thick

M10

40 36.5 43 35





LEVEL-END2166-S1440 x 403.0 thick

M12

40 34.5 43 35LEVEL-END2166-S15 M16



M12

50 47.5 55 44

1000




M12

50 46.5 55 44LEVEL-END2166-S21 M16



M12

50 45.5 55 44LEVEL-END2166-S24 M16



M12

50 44.5 55 44LEVEL-END2166-S27 M16



M1660 56.5 55 45



M1660 52.5 55


Square End Caps are manufactured in re-inforced polyamide and brass insertsB = Outer Breadthb = Inner BreadthS = Insert lengthL = Total lengthM = Thread size

20

Bb

MS

L

GMT Square End Caps havebeen devised for industrialapplications and meet thehighest quality requirements.

The applied material has beencarefully chosen and has beentested successfully to providea secure level of fixing andgood quality fit. End Caps arealso available which areround—refer to page 23 forfurther information aboutthese.

Foot Plates

GMT Square End Caps aremade of reinforced polyamidewith a brass insert andprovide for high quality andpart longevity.

Material

GMT Square End Caps can beused for loads up to 550, 600or 1000daN depending on thesize selected.

Properties



End Caps Round

Product Code Leg Dia, B /thickness

M(mm)

B(mm)

b(mm)

L(mm)

S(mm)

Load(daN)

LEVEL-END2167-R01

301mm thick

M10

30 28.4 35 29 300LEVEL-END2167-R02 M12

LEVEL-END2167-R03 M14


LEVEL-END2167-R05

381.5mm thick

M10

38 35.5 43 34 500LEVEL-END2167-R06 M12



LEVEL-END2167-R09

42.41.5mm thick

M10

42 39.9 42 34





LEVEL-END2167-R14

48.31.5mm thick

M12

48 45.8 49 38LEVEL-END2167-R15 M14



LEVEL-END2167-R18

50.91.5mm thick

M12

51 48.4 49 38 800LEVEL-END2167-R19 M14



600

Round End Caps are manufactured in re-inforced polyamide with brass insertsB = Outer Diameterb = Inner DiameterS = Insert lengthL = Total lengthM = Thread size

22

Bb

MS

L

GMT Round End Caps havebeen devised for industrialapplications and meet thehighest quality requirements.

The applied material has beencarefully chosen and has beentested successfully to providea secure level of fixing andgood quality fit. End Caps arealso available which aresquare —refer to page 21 forfurther information aboutthese.

Foot Plates

GMT Round End Caps aremade of reinforced polyamidewith a brass insert andprovide for high quality andpart longevity.

Material

GMT Round End Caps can beused for loads up to 300,500, 600 or 800daN depend-ing on the size selected.

Properties



Levelling Feet for all your needs

24

GMT RUBBER-METAL-TECHNIC LTD.THE SIDINGS, STATION ROAD, GUISELEY, LEEDS, WEST YORKSHIRE, UK, LS20 8BX

TEL: +44 (0) 1943 870 670 FAX: +44 (0) 1943 870 631EMAIL: [email protected] WEBSITE: www.gmt.gb.com

mailto:[email protected]

http://www.gmt.gb.com

Technology

Levelling Feet by GMT