1
Tips and Tricks for Your New Lighting System Frequently we tend to hear from our customers “I wish absolutely the best led lighting system and those we will say while not a doubt “not a problem”. Over the past six years we've got learned plenty concerning ourselves as a corporation, and even a lot of concerning our product. Expertise has educated North American nation a way to hone in on precisely what customers wish, that is what makes North American nation therefore successful! Below is a unit some easy tips and tricks that we've got found to form any lighting system perfect! Problem: suspension Cables Everyone has some, and nobody desires to envision them. We’ve got a number of solutions for this quite common drawback. Cable Clamps: These handy very little clamps go with associate degree adhesive backing and may even be mounted with screws. They need a little clamp that may capture and stoppage any additional cable clamp tip and trick. Exchanging cables: Our kits return normal with 3′ cables. Sadly most kitchens don't seem to be designed with constant measurements. We’ve got found that 3′ cables offer enough length for many kitchens; however you'll continually exchange cables if they're too long or too short! Problem: Dots That fresh granite counter prime is shiny; very shiny, and it’s reflective each single diode on your panel or versatile light-emitting diode strips. To mend this issue we've got a number of totally different choices that may facilitate scale back or eliminate the “dot effect”. Alter the mounting: Conventionally it is sensible to possess a light-weight strip facing down directly at the counter prime. This can be best for task lighting, and is additionally best for the reflective angle of the LED's , but it's one in every of the most causes of the “dot effect”. Instead strive putting the lighting on the lip of the cupboard facing the rear splash. This can greatly scale back the reflection, boast your elaborate back splash, and still offer nice task lighting! Different Product: Our fresh effulgent Edge Series panels boast a sleek style, and a diffusion lens that eliminates the reflection of individual diodes. Our Designer Series Panels also are an excellent different Problem: You don’t recognize what you need!

Led hut ltd tips and tricks for your new lighting system

Embed Size (px)

Citation preview

Page 1: Led hut ltd   tips and tricks for your new lighting system

Tips and Tricks for Your New Lighting System

Frequently we tend to hear from our customers “I wish absolutely the best led lighting system”

and those we will say while not a doubt “not a problem”. Over the past six years we've got

learned plenty concerning ourselves as a corporation, and even a lot of concerning our product.

Expertise has educated North American nation a way to hone in on precisely what customers

wish, that is what makes North American nation therefore successful! Below is a unit some easy

tips and tricks that we've got found to form any lighting system perfect!

Problem: suspension Cables

Everyone has some, and nobody desires to envision them. We’ve got a number of solutions for

this quite common drawback.

Cable Clamps: These handy very little clamps go with associate degree adhesive backing and

may even be mounted with screws. They need a little clamp that may capture and stoppage any

additional cable clamp tip and trick.

Exchanging cables: Our kits return normal with 3′ cables. Sadly most kitchens don't seem to be

designed with constant measurements. We’ve got found that 3′ cables offer enough length for

many kitchens; however you'll continually exchange cables if they're too long or too short!

Problem: Dots

That fresh granite counter prime is shiny; very shiny, and it’s reflective each single diode on

your panel or versatile light-emitting diode strips. To mend this issue we've got a number of

totally different choices that may facilitate scale back or eliminate the “dot effect”.

Alter the mounting: Conventionally it is sensible to possess a light-weight strip facing down

directly at the counter prime. This can be best for task lighting, and is additionally best for the

reflective angle of the LED's, but it's one in every of the most causes of the “dot effect”. Instead

strive putting the lighting on the lip of the cupboard facing the rear splash. This can greatly

scale back the reflection, boast your elaborate back splash, and still offer nice task lighting!

Different Product: Our fresh effulgent Edge Series panels boast a sleek style, and a diffusion

lens that eliminates the reflection of individual diodes. Our Designer Series Panels also are an

excellent different

Problem: You don’t recognize what you need!