Upload
pradeep-cheekatla
View
1.656
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Citation preview
A Presentation on
Land slide warning system
CONTENTS Introduction Description Hardware design Design of end device and router Sensors hardware connection Angle sensor Liquid level sensor Design of the coordinator Software design Flowchart of terminal node Conclusion
INTRODUCTIONThe combined and separated research advancement in the
fields of sensing, communication and computing has driven the research efforts in wireless sensor networks.
A wireless sensor network is composed of large number of sensor nodes that communicate with each other through multi hop wireless links.
Land slide monitoring mainly relies on two sensors
1. Liquid level sensor
2. Angle sensorsLandslide warning system is based on wireless sensor networks
using zigbee protocol.
Sensors deployment
DESCRIPTION The landslide warning system is based on Zigbee wireless communication Protocol, adopts the CC2430 chip for wireless data transmission.
System structure diagram
HARDWARE DESIGNThe hardware uses CC2430 as the processing core component.
It is a system on chip specifically suited for IEEE 802.15.4 and zigbee applications.
In a single chip it integrated zigbee RF, memory and 8051 microcontroller.
When the system is in spare mode, CC2430 automatically goes into sleeping mode and can switch between sleeping mode and active made in ultra short time.
DESIGN OF END DEVICE AND ROUTER
Schematic diagram of end device
SENSORS HARDWARE CONNECTION
ANGLE SENSOR: The landslide warning system uses SCA60C as angle sensor. It is used to detect the mountain angle.
Angle sensor hardware connection
LIQUID LEVEL SENSOR:
Liquid level sensors adopts PTP601, it integrates a pressure level sensor and a signal amplifier.
Liquid level sensor connection
DESIGN OF THE COORDINATORThe coordinator node has a GSM module and a serial
communication module. It chooses SP3223 as the serial communication module.
Schematic circuit of serial module
Circuit of GSM module
SOFTWARE DESIGNThis design adopts z-stack2006 which is free and half open
source zigbee protocol stack. It is made up of MAC layer, physical layer, network layer and
application layer.A zigbee network allows one zigbee coordinator.
FLOW CHART OF TERMINAL NODE
CONCLUSIONThe sensor nodes are the bases of wireless sensor networks. It
includes a sensor network node system for landslide based on CC2430 which can monitor the situation of mountain.