IntegraCAD 2011 - HVAC calculation and drawing software

Professional mechanical engineering software

INTEGRACAD2011

Impuls ing d.o.o. 06/2011. www.integracad.com

Professional mechanical engineering software INTEGRACAD2011


More than 20 years of continued development speak for itself. We have gone a long way from the simple heat load table calculator to a full suite of calculations, CAD, report and database modules integrated in a modern interface that is both easy to learn and simple to work with. Houses, apartments, offices, industry and public buildings, no project is too big or too small for the program to handle. From beginner to expert, there is an INTEGRACAD2011 version for everybody!

Draw2Calc technology Heating calculations Cooling calculations Ventilation ducts Potable water and drainage Program versions Licencing Software trainings and support Contacts

The right tool for the job

Contents:

The use of Draw2Calc technology enables simple building generation coupled with fast and accurate heating/cooling load calculations.


Drawing walls, windows and doors is enough for the program to generate rooms. By placing apartment identifiers the program can insert those rooms into the appropriate apartments. You can even add an orientation marker for a clearer overview of the transmission results. The transmission and ventilation losses are calculated automatically and all data is ready for your review. The Draw2Calc technology is currently available only for the European EN 12831 heat loss calculation.

Preparing the room generation: Exterior walls are green, interior walls and windows light blue and doors brown. On the right you can see the orientation marker, pointing to Northeast. Additional room data like inner room temperature, floor and ceiling settings etc. can be input manually.


Draw2Calc technology

Heat load, Radiant floor & wall heating, Radiator selection and pipeline calculation, Fan-coil selection and pipeline calculation.


From heat loss to equipment selection, all common heating calculation are available. Use the heat load data for sizing radiators, then drag&drop the real-size 3D blocks on you dwg drawing to connect with pipes and generate the pipeline. Smart features like automatic valve balancing and pipe sizing by max. pressure can save you a lot of time. After completeing all calculations the program will prepare a large array or reports including a building summary, valve balancing chart and material lists. All reports can be exported to .xls format with just one click.

Radiant floor calculation: Heating and cooling are calculated at the same time using fixed or free mass flows. Powerful CAD functions allow full drawing and calculation for different loop shapes (spiral, parallel and double parallel). Connect loops to the manifold using standard pipe drawing tools.


Heating calculations

Cooling load, Radiant floor & wall cooling, Fan-coil selection and pipeline calculation.


Draw2Calc technology can be used to generate geometric data quickly. This data can then be copied to the cooling load to speed-up the calculation process. Fan-coils can be sized for any flow/return temperature, room humidity, inner room temperature and ventilator speed. The fan-coil pipeline is designed in the same way as the radiator pipeline and supports two-pipe and four-pipe systems. You can also mix radiators and fan-coils in the same pipeline. The print reports include peak cooling loads, detailed 24-hour cooling load, highest pressure drop branches, and material lists.

Cooling load calculation: Calculate interior and exterior cooling loads with our easy to use interface. You can input persons, machines, lights, material throughput, interior and exterior transmission. Peak values can be analyzed with charts and detailed printouts.


Cooling calculations

Ventilation duct sizing and pressure drop calculations including CAD and table functionality.


It’s quick and easy to calculate ventilation ducts using our ad-vanced tools. You can size ducts by maximum speed or pressure drop and maximum height or width. Grilles are generated as soon as you input an air flow on a section. Fittings and other elements can be added from the program database or through direct data input. The program calculates the branch with the highest pres-sure drop and sizes the ducts accordingly. You can also use the CAD interface to drag&drop grilles and set their properties. The program will recognize fittings automatically with all data trans-ferred to the calculation table for your review.

Using the advanced fitting selection: You can add standard fittings on any duct section. The program will recognize the available fitting types and preload a selection (i.e. you can choose Tees only when three branches are connected). You can select the actual type and adjust the minor loss calculation variables.

Professional mechanical engineering

INTEGRACAD2011

Ventilation ducts

Potable water and drainage sizing and pressure drop calculations including CAD and table functionality.


Both calculations share the standard set of pipeline drawing tools and techniques as the radiator and fan-coil pipelines. The significant difference is that sink points do not have to be sized before use. You can drag&drop them directly from the program product catalogue. The same sink point blocks can be used both for potable water and drainage. Both calculations also feature exclusive blocks. CAD-made calculations can be adjusted in a standard calculation table. The print reports include an installation overview, material lists and drainage pipe ordering optimisation list.

Using CAD tools for accurate drawing: The picture shows a standard situation where the sink points were already drawn by the architect. To design potable water pipelines you can use the special “connection block” instead of a regular “full body” block. The calculation results for both types are the same.


Potable water and drainage

Select the program and licencing that fit best! Test the program for 30 days or buy the full year subscription to qualify for price dicounts next year!


The INTEGRACAD2011 framework contains seven versions: Sani: potable water and drainage Duct: ventilation ducts Termo: heating Professional: heating and cooling Suite: heating, cooling, potable water and drainage Premium: heating, cooling and ventilation ducts Enterprise: heating, cooling, ventilation ducts, potable water and drainage

Shared version features: The general program framework i.e. the project structure, CAD and report modules have the same functionality in all program versions. Product databases vary in different language versions. You can choose from a total of 12 language versions.


Program versions

Prices range from 229,- € to 699,- € for a 365 days license. Pricelist and online store at: http://www.integracad.com/home/howtobuy.aspx


The program is licensed with a USB dongle. This allows for flexible licensing as the software use is not restricted to one computer. The software license is obtained for a limited time period. You can purchase a 30, 90 or 365 days software license. The purchased time period is coded into every USB dongle before it leaves our office. Upon expiration the program will stop working. To continue using it you will need to renew the license. Renewals are carried out using the Internet.

Using the online store: You need to have a major credit card or PayPal account ready to be able to pay. Select the software directly from our website and complete the order process on the encrypted secure pages of the store. We will handle product shipping and technical support from the moment of purchase.


Licensing

A new program update is released every three months. A new program upgrade is released every two years. All program updates and upgrades are free while the software license is active and can be accessed directly though our website.

For all information write to [email protected] or visit http://www.integracad.com/home.aspx


Join our free webinars! We publish the dates and topics regularly on our website front page. To apply you need to register and login first. An e-mail with a link for the webinar will be sent to you upon approval. To participate just click on the link at the scheduled time and watch the live presentation in your browser. If you feel a live training would suite you best, you can arrange it with our technical support staff. Send your inquiries directly to [email protected]


Software trainings and support

Professional mechanical engineering software

INTEGRACAD2011

Impuls ing d.o.o. 06/2011.

Contacts: Impuls ing d.o.o. Furicevo 90 HR - 51216 Viskovo Croatia

tel. +385 51 545 880 [email protected] www.integracad.com

www.integracad.com

Technology

IntegraCAD 2011 - HVAC calculation and drawing software