CartomizerLED Battery

(GB) Instruction Manual

Thank you for choosing our E-cigarette. Congratulations on choosing to start a healthier lifestyle.

Before use, please read this manual (and other leaflets attached to the kit) carefully and keep it for future reference.

Structure

The Mild Pure kit involves smoking using cartomizers. The kit is designed for people valuing the look of an analogue cigarette and the convenience of smoking. The complete Mild Pure e-cigarette consists of 2 parts: a battery and a cartomizer. There is a light-emitting diode at the tip of the e-cigarette. The diode imitates the burning end of a traditional cigarette (the diode emits light during the inhalation of the e-cigarette).

Assembly and instructions for use

In case of an automatic battery – screw the cartomizer to the battery and take a puff. In case of a manual battery – screw the cartomizer to the battery and then press the battery button (when the diode starts to emit light, it means that the battery provides voltage to the atomizer). After pressing the button, take a puff (in the same way as when smoking a regular cigarette) and then release the button.

NOTE! When you use a new cartomizer, take several puffs to allow the liquid to get warmed up by the heating element. Take long and slow inhalations to get the most intense taste sensations and the greatest amount of smoke. The kit includes pre-filled cartomizers, so you can start smoking straight away.

2.1 Cartomizers

A cartomizer is the combination of a high-tech atomizer (the heating element) and a capacious nicotine cartridge with the cotton batting.The kit includes pre-filled refillable cartomizers (one refill can be refilled up to 3-5 times. Then, the cotton batting becomes worn.) Refills need to be refilled either when you notice a significant reduction in the amount of smoke or when you feel the change in the flavour.When you want to refill a cartomizer, remove a white rubber cap (for example, with a paperclip). Add 10 drops of e-liquid directly onto the cotton batting. Then, put the rubber cap back in place, screw the cartomizer and start smoking. We recommend using only the brand-name refill liquids: Mild, Volish, Provoq, LiQueen.

NOTE! The number of drops may vary slightly depending on how dry a cartomizer is.

Contradictions – please read the leaflet (included in the kit) to find out information concerning the e-liquid.

Always keep the thread of the battery, atomizer and cartridge clean. Use either tissues or cotton buds to clean the parts.

The warranty does not cover damage caused by either misuse or the use of non-genuine parts.

The kit parts shall be kept away from objects like keys in order to avoid dents, chips or other serious damage. The product shall be kept away from humid areas and areas of high temperature.

If there is any problem with the product, please contact the seller immediately (or the distributor of the Mild brand). Do not attempt to repair any part of the kit yourself. Repairs must to be performed by an authorized service centre. The warranty excludes damage resulting from unauthorised attempts to open the product.

2.2 Battery charging

The battery is discharged when the light-emitting diode (at the end of the battery) flashes 10 times. The battery may also need to be charged when the concentration of smoke diminishes (and there is still some liquid inside the cartomizer).

To charge the battery, remove it from the e-cigarette and screw the battery to the USB charger (included in the kit). You can charge the battery using either an USB port or 220V plug adapter (included in the kit). After connecting the battery to the charger, the battery diode should flash 5 times and the diode on the charger should start emitting a fixed blue light. The battery is fully charged when the light on the charger turns from a fixed blue light to a flashing blue one. You can remove the battery from the charger and start smoking.

NOTE! The battery charging time is approx 1,5 - 3h. The first charging process should last approx 3h (do not stop the first charging process even if the charger shows that the battery is fully charged).

2.3 Mild Sin – recommendations

The way of inhaling is extremely important. Long and slow inhalations provide the most intense taste sensations and the greatest amount of smoke. After several puffs, take a break for a moment to allow the atomizer to cool down and to allow the liquid to flow down towards the heating element, otherwise you may feel the smell of burnt cotton. If you notice that your e-cigarette produces less smoke or changes its flavour (and there is still some liquid inside the cartomizer), unscrew the cartomizer and roll it between your palms to allow the liquid reach the heating element and to ensure a uniform distribution of the liquid.

NOTE! Use only genuine Mild products and accessories. We take no responsibility for damage caused by the use of non-Mild products and accessories. Non-genuine products may reduce the device efficiency or damage it. They may be hazardous to health, too. Remember! Only genuine accessories (refills, batteries, etc.) are 100% compatible and ensure faultless and long-term operation of our devices.

1. Structure, assembly and instructions for use

2. Information on how to use the e-cigarette

3. Precautions and warranty

Recommended by

www.eSmokingWorld.com