Identification systems for industrial production control and mobile machines

101

Identification systems forindustrial production control

and mobile machines.

years

W

ARRANTY

on ifm products

ww

w.if

m.c

om

/gb

/id

enti

fica

tio

nId

enti

fica

tio

n s

yste

ms

Gesamtkatalog EN 2015_Stilvorlage LK FrutigerOT_2010 DE_GB.qxd 17.11.14 12:50 Seite 3

HF system13.56 MHz

RFID systemDTM

LF system125 KHz

RFID systemDTS125

Opticalcode reader

Multicode readertype O2I

LF/HF system125 KHz13.56 MHz

UHF system868 MHz (EU)913 MHz (USA)

RFID systemDTE100

RFID systemDTE800

2

Identification systems from ifm electronic.The optimum solution for every requirement.

For industrialapplications

Systems formobile machines

Type overview

Range

Field

bus

Stora

ge cap

acity

tag

Hard ta

g, adap

ted to

the a

pplicat

ion co

ndition

Smar

t tag

,

low

-cost

adhes

ive ta

pe

–Identification inmobile machines.

–up to 100 mm AS-i 16 bitIdentificationin routingconveyors.

– –up to 2 m

RS232EthernetTCP/IP

Ethernet/IP

1D bar codes,2D Matrix

codes,Text

Identification of1D and 2D codes forthe monitoring ofprocess operations.

up to 10 mEthernetTCP/IP

EtherNet/IP

240 bit EPC512 bit user

up to 100 mm

SAP/ERP

Profibus DPProfinet DPEtherNet/IP

TCP/IPEthercat

8 KBIdentificationin conveyors.Large data volumes,high speed.

Identification inproduction and logistics.Long ranges,many tags.

100 mm CANopen 8 KB

3

Op

tica

lco

de

read

erR

FID

ro

uti

ng

con

veyo

rsR

FID

con

veyo

rsR

FID

pro

du

ctio

nan

d lo

gis

tics

RFI

D m

ob

ilem

ach

ines

4 - 5

6 - 7

8 - 9

10 - 11

12 - 13

14 - 15

4

High reading reliability:Automatic setting of theexposure time, adaptation bysegmented lighting for criticalsurfaces.

Intelligence in the sensor:Verifier system reduces datatransmission.

Flexible connection:RS-232, Ethernet TCP/IP andEthetnet/IP interface.

Quick in the process:Object speeds of up to 7 m/s.

Compact integration:Illumination, optics, evaluationand interfaces in an industriallycompatible housing.

Easy handling:The system is configured andready for use within a fewminutes – with PC software ordirectly on the sensor.

Multicode reader type O2IThe compact all-rounder.

The compact unit is installed using thesuitable mounting set and connectedto the controller (PLC) via the processinterface.Parameter setting is done via anEthernet cable using a common PC.

Powerfulidentification.

Independent oforientation andnumber of codesthe multicodereader automati-cally decodes1D and 2D codes.

The new versionalso solves OCRtasks, e.g. for pro-duct identificationby type design-ations or serialnumbers.All informationsuch as expirydate or productiondate can now beread directly.

Further functionsinclude the outputof the codeposition via theprocess interface,


5

Optimumillumination.

In addition to anautomatic expo-sure setting,manual adjustmentis also possible.Four lightingsegments can bedeactivated andactivated manu-ally. So optimumresults are achiev-ed even withhighly reflectivemetal surfaces.

The ifm multicode reader detectsnumerous 2D and 1D codes.The standardised 2D code can beapplied in different ways: printed onpaper, engraved by laser or dot-peened onto a metal surface.

One of many examples: Based on theData Matrix code, the multicodereader identifies hygienically packedcotton swabs on a conveyor beltdynamically.

O2I in theapplication.

The ifm multicodereader is used in awide range of in-dustrial applica-tions. It providesproduct tracking,production controlor product identi-fication in themost varied areas:automotive, elec-tronic and food in-dustries, conveyortechnology or inmachine tools andprinting machines.

The standardisedprocess interfacesRS-232, EthernetTCP/IP and Ether-Net/IP ensure fastand easy integra-tion in industrialcontrol techno-logy.

Further information atwww.ifm.com/gb/multicodereader

Orientation-independent identificationof 1D and 2D codes.

QR code

PDF code

DMC code

Bar code

Text

adjustable totalquality parame-ters, individualillumination set-tings for eachconfiguration in agroup, integratedfault memory andaccess protectionwith password.

The professionalsoftware of themulticode readertakes the highreading reliabilityof the Data Matrixcode to a newdimension.

Top choice forprice/performance:the multicodereader provideshigh functionalityand performanceat the price of asensor.

710377582942

Op

tica

lco

de

read

erR

FID

ro

uti

ng

con

veyo

rsR

FID

con

veyo

rsR

FID

pro

du

ctio

nan

d lo

gis

tics

RFI

D m

ob

ilem

ach

ines

6

Plug and play:Cost reduction with quick andeasy set-up.

Efficient:Connection of up to 31 RFIDreaders to one AS-i master.

Safe:High reading reliability forcompact design.

Ready for operationat once:No programming for read / writesystems with AS-Interface.The stored value is automaticallyprovided by the transponderwhen the antenna is passed.

Certified:The AS-Interface certificationguarantees interoperability inautomation technology.

RFID system DTS125Keep track of the workpiece.

Plug and Play also for the hardware:connection via M12 connector or AS-isplitter box. The DTS125 system canbe integrated into AS-i networks inno time and is ready for operationimmediately. In addition to the lowercost for hardware, this also saves timeduring set-up.

The DTS125 RFID system ensuressmooth logistics flow on a productionline for transmissions. All workpiececarriers can be identified by meansof RFID. Optical processes such as barcodes were eliminated due to thesevere operating conditions (oils,metal swarf).

The DTS125 RFidentificationsystem from ifm isan industriallycompatible identi-fication system in125 KHz techno-logy. It is the firstRFID system forAS-Interfaceworldwide.

The compact read /write heads in-clude, in additionto the antenna,the complete eva-luation and theinterface to AS-i. So the units can beoperated directlyon the AS-Inter-face and enabledata transmissionto the controller.


http://www.ifm.com/products/gb/ds/DTS125.htm


7

The RFID system DTS125 – ideal forsolving tasks in assembly and con-veying technology as well as in hand-ling automation. It detects objects ontransport systems at a travel speed ofup to 0.5 m/s.

ifm offers thesystem solutionapp “RFID DTA”for a particularease of handlingof the RFID dataand communica-tion with higher-level networks.Download andconfiguration ofthe app is madevia the integratedweb interface, i.e.all requiredsettings can beconveniently madeusing a device withinternet browser.

ID tags for assem-bly and conveyorsystems. The robusttransponders,which do notrequire any batter-ies, are particularlysuited for use inhigh temperatureranges.

filling systems.The system is alsothe optimumchoice for markingworkpiece carriers.

DTS125 in theapplication.

The DTS125 RFIDsystem has beendesigned forproduction controlin assembly andconveying technol-ogy, handling,packaging and

Further information atwww.ifm.com/gb/dts125

PLC

SmartPLC asgateway to thefieldbus

RFI

D r

ou

tin

gco

nve

yors

RFI

Dco

nve

yors

RFI

D p

rod

uct

ion

and

log

isti

csR

FID

mo

bile

mac

hin

esO

pti

cal

cod

e re

ader

ifm systemsolutions appRFID DTA

LF RFID system withintegrated AS-Interface.



8

Clear:Status display via LED andintegrated web server.

Flexible:Connection of RFID antennas ordigital inputs / outputs. Antennaand transponder combinations ofsome bits to several Kbytes.

Easy:Connection of the antennas withunshielded standard cables upto 20 m.

Integrable:Function blocks enable easyintegration into the higher levelautomation or process control.

Certified:The fieldbus certificationguarantees interoperability inautomation technology.

Robust:Protection rating IP 67 for harshindustrial environments.

RFID system DTE100The “electronic route card”.

The LF or HF read / write antennas inan industrially compatible housing aresimply connected to the evaluationunit via a standard M12 connector.

RFID system withevaluation unit,antennas andtransponders.

ifm electronic hasdeveloped a newRFID system forproduction andconveying in par-ticular.

The integratedweb server enableseasy parametersetting via theweb browser.The requirementsof harsh industrialenvironments aremet by a robusthousing, a widetemperaturerange and thehigh protectionrating IP 67.

Scan code and watch the video

on the DTE100 system!


http://www.ifm.com/products/gb/ds/DTE100.htm


9

The RFID evalua-tion units DTE10xhave four antennaconnections,which can alter-natively be used asdigital I/Os.The antennas areconnected viastandardisedM12 connectors.

The standard pinassignment of theI/O connectionsensures thatcommon sensorsor actuators aredirectly connectedand powered fromthe RFID evalua-tion unit.

LF and HFtransponder.

In addition to LFtransponders withup to 2-Kbit mem-ory, the productportfolio of ifmalso covers HFtransponders with8 Kbits as FRAMversion which canbe rewritten anunlimited numberof times.

Differentinterfaces.

DTE100 withProfibus DP: eva-luation unit withintegrated Profi-bus DP interface.

DTE101 withProfinet: Evalua-tion unit withintegrated Profinetinterface.

DTE102 withEtherNet/IP:evaluation unitwith integratedEtherNet/IPinterface.

DTE104 withTCP/IP andSAP/ERP connec-tivity: Ideal fordirect connectionto PCs, industrialPCs or PLCs thathave no standar-dised fieldbusinterface.Users can accessall connected an-tennas, sensorsand actuators viaTCP/IP protocol.

All connections are for standard M12connectors. Current is also directlysupplied via an M12 connection.The wide range of accessories suchas Profibus connection cables andterminating resistors facilitate thesystem set-up.

DTE100 in theapplication.

The RFID systemplatform is widelyused in productionfor identifyingtools or monitor-ing productionsteps.

Data can be savedand read in thetransponder as onan electronic routecard.

Further applica-tions can be foundin quality assur-ance, in the auto-motive industry aswell as in automa-tion and convey-ing.

Easy use andflexible parametersetting allow theuser to solve eachidentification taskprecisely andwithout any prob-lems.

Further information atwww.ifm.com/gb/dte100

PLC

RFID evaluationunit

Web browser

LF/HF RFID with integratedfieldbus interface.

Op

tica

lco

de

read

erR

FID

ro

uti

ng

con

veyo

rsR

FID

con

veyo

rsR

FID

pro

du

ctio

nan

d lo

gis

tics

RFI

D m

ob

ilem

ach

ines

TCP/IP SAP/ERP


10

Clear:Status display via LED andintegrated web server.

Flexible:Ultra low, low, mid and widerange antennas for everyapplication.

Easy:UHF evaluation unit with fourexternal antenna terminals.

Integrated:Ethernet TCP/IP and Ethernet IPinterface for parameter settingand data transmission.

Robust:The protection ratings IP 65 /IP 67 meet all requirements forharsh industrial environments.

RFID system DTE800Long ranges for

production and logistics.

UHF evaluationunits.

As components ofthe UHF systemplatform, theUHF evaluationunits DTE800 andDTE900 are comp-liant with the UHFbands in Europeand the USArespectively.The setting ofcorrespondingcountry profilesenables use of theunits in manyother countries.

The stationaryunits in the UHFrange allow longread / write rangeswith passive tags.

Up to 10 m:Wide range antenna for the simul-taneous detection of large quantities,e.g. boxes on pallets when gates arepassed.

Connection of4 antennas.

Only for ifm:UHF evaluation

unit with differenttypes of antenna,

also for mixed ope-ration. With Ether-

net interface anddigital inputs and

outputs.


11

Up to 2 m:Mid range antenna for the reliableidentification of larger units, e.g.on a conveyor belt.

Ultra low and lowrange antennas.

These antennasare designed toopeate in the nearfield. In order toachieve a highselectivity, thesmallest possibledesigns are usedenabling shortreading ranges.

Mid rangeantennas.

Due to its smallerdimensions themid range an-tenna is chosen forapplications in thenear / far fieldwith reading ran-ges of up to 2 m.

Wide rangeantennas.

With an angle ofaperture of 30°these antennashave been deve-loped for appli-cations in the farfield wherereading ranges ofup to 10 m arerequired.

Up to 20 cm:(Ultra) low range antenna for theselective detection of individualproducts in the close range.

DTE800 in theapplication.

The UHF systemplatform from ifmelectronic is usedin production,intralogistics andconveying due tothe application-specific antennas.

Goods such aspackaging orpallets can bedetected withoutcontact.

The UHF RFID isoptimised forapplications inproduction andmaterial flowcontrol, the assetand supply chainmanagement aswell as track &trace.

Further information atwww.ifm.com/gb/dte800

PLC

RFID evaluationunit

Systematic UHF RFID transparency.

Op

tica

lco

de

read

erR

FID

ro

uti

ng

con

veyo

rsR

FID

con

veyo

rsR

FID

pro

du

ctio

nan

d lo

gis

tics

RFI

D m

ob

ilem

ach

ines


12

Integrated:Antenna, evaluation andCANopen interface in a compactM18 or M30 housing.

Insensitive:Extended temperature range of-40...85 °C.

Approved:E1 type approval.

Robust:Optimised for outdoor use withIP 67 and IP 69K, shock resistantto EN60068-2-27, vibrationresistant to EN60068-2-64.

Compatibility:CANopen protocol, optimisedfor use with ifm ecomatmobilecontrollers.

RFID system DTMRobust and for mobile use.

RFID compactunit suitable formobile use.

The robust RFIDcompact unit withCANopen inter-face has beendeveloped foridentification tasksin agriculturalmachines, muni-cipal vehicles andconstructionmachines.

It can be used toautomaticallydetect differentattachments andconfigure thecorrespondingsettings in thecontroller.

Completeness check:The presence of different tools on thecorresponding fixtures is detected.


13

This automaticidentification sim-plifies the creationof user-specificsystem set-ups.

Information onmaintenanceintervals and oper-ating times canautomatically begenerated andstored since thecontroller automa-tically detectswhen and howlong a specific ma-chine set-up runs.Downtime is keptto a minimum,productivity isincreased.

Identification of fittings and tools.This allows the detection and evalua-tion of operating times and mainten-ance intervals.

RFID compact unit withintegrated CANopen interface.

Further information atwww.ifm.com/gb/dtm

Op

tica

lco

de

read

erR

FID

ro

uti

ng

con

veyo

rsR

FID

con

veyo

rsR

FID

pro

du

ctio

nan

d lo

gis

tics

RFI

D m

ob

ilem

ach

ines

Different fittings are detected.The application parameters in thecontroller and in the operating devicesare automatically adjusted.

DTM in theapplication.

ifm as an automa-tion specialist hasknow-how ofmany years in thearea of mobilemachines, wherecontrol systems

and sensors fromifm have beenestablished in themarket.The competencesand experience ofthese both diffe-rent areas havenow been com-bined in the RFIDsolution formobile machines.

RFID evaluationunit and antenna

Control systemwith display

14

Operating distance [mm]

Field of view size [mm]

50

20 x 14 36 x 26 68 x 50

100 200

Order no. red light O2I300 O2I302

LF RFID system DTS125 · 125 KHzRead / write systems / antennas Order no.

RFID read / write system, AS-Interface, range max. 10 mm DTA100

RFID read system, AS-Interface, range max. 20 mm DTA101



O2I304

Order no. red light O2I350 O2I352 O2I354

Order no. infrared O2I301 O2I303 O2I305

Order no. infrared O2I351 O2I353 O2I355

50

46 x 32 77 x 56 140 x 100

100 200 200

40 x 30



Transponders Order no.

ID tag / M18 x 1 / 01 E80311

ID tag / Ø 12 x 2 / 01 E80312

ID tag / Ø 20 x 2.15 / 01 E80317

ID tag / Ø 30 x 2.15 / 01 E80318

ID tag / Ø 50 x 2.2 / 01 E80319

ID tag / ISO CARD / 01 E80320

Multicode reader type O2I

LF/HF RFID system DTE100 · 125 KHz · 13.56 MHzEvaluation units / antennas Order no.

RFID evaluation unit, Profibus DP DTE100

RFID evaluation unit, Profinet DP DTE101

RFID evaluation unit, EtherNet/IP DTE102

RFID evaluation unit, EtherCAT DTE103

RFID evaluation unit, Ethernet TCP/IP DTE104

RFID antenna 13.56 MHz, M12, flush installation ANT410

RFID antenna 13.56 MHz, M12, non-flush installation ANT411





RFID antenna 125 KHz, 66 x 40 x 40 mm ANT512

RFID antenna 13.56 MHz, 66 x 40 x 40 mm ANT513

RFID antenna 13.56 MHz, 48 x 20 x 7 mm, cable 1 m ANT515

RFID antenna 13.56 MHz, 48 x 20 x 7 mm, cable 2 m ANT516


ID tag / Ø 30 x 2.5 / 05 – 125 KHz 256 bit E80360

ID tag / Ø 30 x 2.5 / 05 – 125 KHz 2048 bit E80361

ID tag / Ø 30 x 2.8 / 03 – 13.56 MHz 16 Kbit – FRAM E80370

ID tag / Ø 30 x 2.5 / 06 – 13.56 MHz 896 bit E80371

ID tag / Ø 20 x 2.5 / 06 – 13.56 MHz 896 bit E80377

ID tag / label 80 x 50 / 03 – 13.56 MHz 896 bit E80379

ID tag / Ø 30 x 2.8 / 03 – 13.56 MHz 64 Kbit E80380

ID tag / Ø 4,35 x 3.6 / 03 – 13.56 MHz 896 bit E80381

ID tag / label 65 x 30 / 03 – 13.56 MHz 896 bit E80382


200 x 150 400 x 300

1000 2000

Identification systems from ifm electronic.The choice is yours.



http://www.ifm.com/products/gb/ds/O2I300.htm


http://www.ifm.com/products/gb/ds/DTA100.htm
















http://www.ifm.com/products/gb/ds/E80311.htm











http://www.ifm.com/products/gb/ds/ANT410.htm




















15

All types at a glance.

UHF RFID system DTE800 · 868 MHz (EU) · 913 MHz (USA)Evaluation units Order no.

RFID UHF evaluation unit, Ethernet TCP/IP EU/ETSI DTE800

RFID UHF evaluation unit, Ethernet TCP/IP US/FCC DTE900

RFID UHF evaluation unit, EtherNet/IP EU/ETSI DTE810

RFID UHF evaluation unit, EtherNet/IP US/FCC DTE910

RFID UHF sensor, Ethernet TCP/IP DTE820

Antennas

RFID UHF low range antenna, EU/ETSI

RFID UHF ultra low range antenna, EU/ETSI/US/FCC

RFID UHF low range antenna, US/FCC

RFID UHF mid range antenna, EU/ETSI/US/FCC

RFID UHF mid range antenna, US/FCC

RFID system DTM · 13.56 MHzEvaluation units Order no.

RFID evaluation unit / antenna 13.56 MHz, M18,CANopen interface, flush installation DTM424

RFID evaluation unit / antenna 13.56 MHz, M18,CANopen interface, non-flush installation DTM425

RFID evaluation unit / antenna 13.56 MHz, M30,CANopen interface, flush installation DTM434

RFID evaluation unit / antenna 13.56 MHz, M30,CANopen interface, non-flush installation DTM435

BasicDisplay XL 4.3", CAN interface CR0452



ID tag / Ø 30 x 2.5 / 06 – 13.56 MHz 896 bit E80371

ID tag / Ø 20 x 2.5 / 06 – 13.56 MHz 896 bit E80377

ID tag / Ø 30 x 2.8 / 03 – 13.56 MHz 64 Kbit E80380

ID tag / Ø 4.35 x 3.6 / 03 – 13.56 MHz 896 bit, 10 pcs. E80381

ID tag / label 65 x 30 / 03 – 13.56 MHz 896 bit, 500 pcs. E80382

ID tag / label 80 x 50 / 03 – 13.56 MHz 896 bit, 500 pcs. E80379

Order now?

Visit our e-shop at

www.ifm.com

Order no.

ANT805

ANT810

ANT910

ANT815

ANT920

RFID UHF mid range antenna, 100°/100° EU/ETSI

RFID UHF wide range antenna, 70°/70° EU/ETSI

RFID UHF wide range antenna, 70°/70° US/FCC

ANT820

ANT830

ANT930

Transponders

RFID-UHF on metal ID tag / Ø 55 x 13 / 04

RFID-UHF ID tag / Ø 50 x 3.3 / 04

ID tag / Ø 30 x 10 / 04

ID tag / Ø 40 x 10 / 04

Order no.

E80350

E80351

E80353

E80354

More designs at www.ifm.com

Control system with display Order no.






http://www.ifm.com/products/gb/ds/DTM424.htm




http://www.ifm.com/products/gb/ds/CR0452.htm




















Visit our website:

www.ifm.com

ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-mail [email protected]

Over 70 locations worldwide –at a glance at www.ifm.com

Position sensors

Sensors formotion control

Industrial imaging

Safety technology

Process sensors

Condition monitoringsystems

Industrialcommunication

Identification systems


Connectiontechnology

Overviewifm product range:

Accessories

ifm a

rtic

le n

o. 7

8001

716

· We

rese

rve

the

right

to

mak

e te

chni

cal a

ltera

tions

with

out

prio

r no

tice.

· Pr

inte

d in

Ger

man

y on

non

-chl

orin

e bl

each

ed p

aper

. 09

/15

Technology

Identification systems for industrial production control and mobile machines