Icom Catalogue

VHF MARINE TRANSCEIVER

In marine environments there are many sources of noise that can affect the quality of your communications, such as engine noise, breaking surf and more. The IC-M36 automatically adjusts the outgoing voice and the incoming audio to compensate for the ambient noise level: whether you're in a loud environment or in a quiet area, the IC-M36 ensures your radio conversation is sent and received as clearly as possible.

Continuing the legacy of the IC-M34, the IC-M36 floats back up to the surface if dropped overboard, even if the optional speaker microphone, HM-165, is attached.

And yes, it floats too!

(Clear Voice + Voice Boost)

Count on us!

Printed in Japan

2380 116th Avenue NE, Bellevue, WA 98004, U.S.A.Phone : +1 (425) 454-8155Fax : +1 (425) 454-1509E-mail : [email protected] : http://www.icomamerica.com

Unit 1 / 103 Garden Road,Clayton, VIC 3168 AustraliaPhone : +61 (03) 9549 7500Fax : +61 (03) 9549 7505 E-mail : [email protected] : http://www.icom.net.au

Ctra. Rubi, No. 88 "Edificio Can Castanyer" Bajos A 08174, Sant Cugat del Valles, Barcelona, SpainPhone : +34 (93) 590 26 70Fax : +34 (93) 589 04 46E-mail : [email protected] : http://www.icomspain.com

146A Harris Road, East Tamaki, Auckland, New ZealandPhone : +64 (09) 274 4062Fax : +64 (09) 274 4708E-mail : [email protected] : http://www.icom.co.nz

Glenwood Centre #150-6165 Highway 17, Delta, B.C., V4K 5B8, CanadaPhone : +1 (604) 952-4266Fax : +1 (604) 952-0090E-mail : [email protected] : http://www.icomcanada.com

Your local distributor/dealer:6F No. 68, Sec. 1 Cheng-Teh Road, Taipei, Taiwan, R.O.C.Phone : +886 (02) 2559 1899Fax : +886 (02) 2559 1874E-mail : [email protected] : http://www.asia-icom.com

Communication EquipmentAuf der Krautweide 2465812 Bad Soden am Taunus, GermanyPhone : +49 (6196) 76685-0Fax : +49 (6196) 76685-50E-mail : [email protected] : http://www.icomeurope.com

Blacksole House, Altira Park, Herne Bay, Kent, CT6 6GZ, U.K.Phone : +44 (01227) 741741Fax : +44 (01227) 741742E-mail : [email protected] : http://www.icomuk.co.uk

Zac de la Plaine, 1 Rue Brindejonc des Moulinais, BP 45804, 31505 Toulouse Cedex 5, FrancePhone : +33 (5) 61 36 03 03Fax : +33 (5) 61 36 03 00E-mail : [email protected] : http://www.icom-france.com

81-850 Sopot, ul. 3 Maja 54, PolandPhone : +48 (58) 550 7135Fax : +48 (58) 551 0484E-mail : [email protected] : http://www.icompolska.com.pl

www.icom.co.jp/world1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or other countries.


SPECIFICATIONS

08HS043B* © 2008–2010 Icom Inc.

• Frequency range :Tx 156.025–157.425MHzRx 156.050–163.275MHz

• Usable channel groups : INT, USA, CAN, WX channels• Type of emission : 16K0G3E (FM)• Current drain (at 7.4V DC) :

Tx 6W output 1.5A typicalRx AF max. 300mA typ. (Internal SP)

200mA typ. (External SP)Power save 10mA typ.

• Operating temp. range : –20°C to +60°C; –4°F to +140°F

• Antenna impedance : 50Ω (STUD)• Dimensions (W×H×D) : 62×139.5×43 mm;

(projections not included) 27⁄16×51⁄2×111⁄16 in• Weight (approx.) : 295g; 10.4oz (With BP-252,

FA-SC58V, MB-109)

• Output power (Hi/Low) : 6W/1W 2W/1W (Alkaline cells)

• Max. frequency deviation : ±5kHz• Frequency error : ±10ppm• Spurious emissions : –68dBc typ.• Adjacent channel power : 70dB• Audio harmonic distortion : Less than 10% (at 60% dev.)• Residual modulation : 40dB

• Sensitivity (at 12dB SINAD) : 0.25µV typ.• Squelch sensitivity : 0.35µV typ. (at threshold)• Adjacent Ch. selectivity : 70dB typ.• Spurious response : 70dB typ.• Intermodulation rejection : 70dB typ.• Hum and noise ratio : 40dB• Audio output power (at 10% distortion) :

Internal speaker 700mW typ. (16Ω load)External speaker 350mW typ. (8Ω load)

Measurements made in accordance with TIA/EIA-603. All statedspecifications are subject to change without notice or obligation.

GENERAL TRANSMITTER

RECEIVER

Supplied accessories:• Battery pack, BP-252 • Battery charger, BC-173• AC adapter, BC-147 • Belt clip, MB-109• Antenna, FA-SC58V • Hand strap

BC-173 DESKTOP CHARGER + BC-147*1 AC ADAPTERCharges the battery pack, BP-252, in10 hours (approx.).

FA-SC58VANTENNASoft flexible antenna. Same as supplied.

BC-162 DESKTOP CHARGER + BC-145*1 AC ADAPTERRapidly charges the battery pack, BP-252, in 2 hours (approx.).

HM-165 SPEAKER-MICROPHONE

Waterproof constructionequivalent to IPX7 (1 m depthfor 30 min.).

BP-251 BATTERY CASEBattery case for AAA (LR03)×5 alkaline cells.Output power: 2W.BP-252 Li-Ion BATTERY PACK 7.4V, 950mAh (min.) 980mAh (typ.). Provides 8 hoursoperating time (approx.). (Typical operation with Tx (Hi): Rx: standby=5:5:90)

HM-165

MB-109 BELT CLIPAlligator type. Same as supplied.

MB-109 FA-SC58V

BC-173

BC-162

BC-147

BC-145

OPTIONS Some options may not be available in some countries. Please ask your dealer for details.

LOUD buttonWhen you need an instant “boost” in thevolume, a simple push of the “LOUD” but-ton gives you full volume immediately. Inaddition, holding the “LOUD” button mutesthe audio output.

Noise cancelling microphoneThe sub-microphone on the rear panel invertsphase and cancels out ambient noise from themain microphone. As a result, the IC-M36 re-duces the affect of background noise (particu-larly trebly noise) from the transmitted signal andmakes it easier to catch voice communication.

Automatic volume adjustment When in an engine room or high noise en-vironment, the sub-microphone detects theambient noise and the IC-M36 automati-cally increases the volume output to suit thesurrounding environment.

Low power consumptionAlthough the IC-M36 delivers a high 6W RFoutput and 700mW audio output, its currentsaving circuit offers a practical 8 hours* ofoperating time with the supplied 980mAhLithium-Ion battery pack. * Typical operation with Tx (Hi): Rx: standby=5:5:90

Large buttons and slim dimensionsThanks to the large, easy-to-operate but-tons, the IC-M36 provides intuitive opera-tion. A pinched-waist slender body makes iteasy to hold and carry the radio, and is sur-prisingly compact for a floating radio.

Other features• Waterproof construction equivalent to IPX7

(1m depth for 30 minutes)• Dual/Tri-watch functions• Weather channel with weather alert• 4-step battery life indicator • Auto scan function• Instant access to Ch 16 or Ch 9

BP-252BP-251

Please note : The noise cancellation can produce little or no effect in some conditions depending on type of noise, or the position and distance between the noise source and the microphone, etc. The noise cancellation does not work when an optional external speaker-microphone is connected.

*1 BC-145/BC-147SA for 120V AC. SE for 230V AC. SV for 240V AC.

Applicable U.S. Military Specifications & IP Rating

Standard MIL 810 FMethod Procedure

Low Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4 I, IISolar Radiation 505.4 IRain 506.4 I, IIIHumidity 507.4 –Salt fog 509.4 –Dust 510.4 IImmersion 512.4 IVibration 514.5 IShock 516.5 I, IV

Also meets equivalent MIL-STD-810-C, -D and -E.Ingress Protection StandardDust & Water IP57 (Dust-protection and waterproof protection)

(NAV & COM channels for U.S.A.)

(COM channels for U.S.A.)

(NAV & COM channels for Europe)

(COM channels for Europe)

VHF AIR BAND TRANSCEIVERS

VOR navigation* The IC-A24/E has VOR navigation func-

tions. The DVOR mode shows the radial to

or from a VOR station and the CDI mode

shows the course deviation to/from a VOR

station. You can also input your intended ra-

dial to/from the VOR station and show the

course deviation on the display. In the USA

version, the duplex operation allows you to call a COM channel, while

you are using VOR navigation. (* IC-A24/E only)

External DC power jackAn external DC power jack allows for operation

with the wall charger, BC-167 or the cigarette

lighter cable, CP-20. When the battery pack is in-

stalled, simultaneous charging during operation is

also possible. In addition, an optional battery case,

BP-208N, is available.

Water resistant constructionThe water resistant construction provides reliable

operation in wet conditions.* Equivalent to IPX4 of the corresponding international

standard IEC 60529 (2001).

And more... • 200 memory channels (20 Ch × 10 banks) with

6 character names

• Dedicated 121.5MHz emergency key

• Side tone function allows you to hear your

own voice via an external aviation headset.

• 8.33kHz channel spacing (Depending on version)

• NOAA weather channels (IC-A24/A6 only)

• Tag scanning and memory bank scanning

• ANL (Auto Noise Limiter) for noise reduction

• Low battery alert

The pilot’s favorite handheld is here!Easy to use while fl yingSimple one-handed operation is the most

essential feature of the IC-A24/A6 series.

The well labeled, large keypad provides user

friendly operation. The large display shows

both letters and numbers and is easy to see,

making for fast frequency recognition. The

display is backlit, and so is the keypad. The

light stays on until you turn it off – a very

handy feature for fl ying at night.

“Flip-fl op” channel recallThe IC-A24/A6 series stores the last 10 chan-

nels used. You can easily recall those chan-

nels by pushing the “flip-flop” recall

buttons on the front panel. It is con-

venient for switching between several chan-

nels, such as NAV and COM channels.

CDI mode display

IC-A24 IC-A6

1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 Count on us!www.icom.co.jp/world

Printed in Japan

2380 116th Avenue NE,Bellevue, WA 98004, U.S.A.Phone : +1 (425) 454-8155Fax : +1 (425) 454-1509E-mail : [email protected] : http://www.icomamerica.com





146A Harris Road, East Tamaki,Auckland, New ZealandPhone : +64 (09) 274 4062Fax : +64 (09) 274 4708E-mail : [email protected] : http://www.icom.co.nz

Glenwood Centre #150-6165 Highway 17,Delta, B.C., V4K 5B8, CanadaPhone : +1 (604) 952-4266Fax : +1 (604) 952-0090E-mail : [email protected] : http://www.icomcanada.com


10C07, Long Silver Mansion, No.88, Yong DingRoad, Haidian District, Beijing, 100039, ChinaPhone : +86 (010) 5889 5391/5392/5393Fax : +86 (010) 5889 5395E-mail : [email protected] : http://www.bjicom.com




SPECIFICATIONS

04WS017N* © 2004–2012 Icom Inc.

OPC-499

LC-159

BC-121N+AD-101 (6 pcs.)

BC-157S

HM-173

IC-A24, IC-A6 IC-A24E, IC-A6E

GENERAL

Frequency range IC-A24/E Tx (COM)

Rx (COM, NAV)

IC-A6/E Tx/RX (COM)

IC-A24/A6 RX (Weather)

118.000–136.9917MHz108.000–136.9917MHz118.000–136.9917MHz161.650–163.275MHz

118.000–136.9917MHz108.000–136.9917MHz118.000–136.9917MHz

Number of memory channels 200 (20 Ch × 10 banks)

Channel spacing 8.33/25kHz or 25kHz (depending on version)

Type of emission6K00A3E (25), 5K60A3E

(8.33), 16K0G3E (WX)

6K00A3E (25kHz), 5K60A3E (8.33kHz)

Power supply requirement 7.2V DC (Battery pack), 11.0V DC (External DC Jack)

Current drain (approx.) Tx High Rx Max. audio/Stand-by

1.8A* (* 1.5A typ for 25kHz version)

500mA*/70mA typ. (* 300mA typ for 25kHz version)

Antenna impedance 50Ω nominal (BNC type)

Operating temperature range–10°C to +60°C (USA/GEN)

–10°C to +50°C (AUS)–20°C to +55°C

Dimensions (W×H×D)

(Projections not included)54×129.3×35.5 mm; 2.13×5.09×1.4 in

Weight (approx.) 430g; 15.2oz (With BP-210N and antenna)

TRANSMITTER

Output power (PEP/CW)

(at 7.2V DC)

5.0/1.5W (USA/GEN)

3.6/1.0W (AUS)

5.0/1.5W*(* 3.6/1.0W for 25kHz version)

Audio harmonic distortion Less than 10%Hum and noise ratio More than 35dB

Spurious emissionsMore than 46dB (Except

operating freq. ±62.5kHz point)

Harmonic spurious emissions Less than –26dBm (AUS)Less than –36dBm (Except

operating freq. ±1MHz point)

Frequency stability ±1ppm* (* ±5ppm for 25kHz version)

Ext. microphone connector 3-conductor 2.5 (d) mm (1/10ʺ)/more than 100kΩ

RECEIVER

Intermediate frequency (1st/2nd) 46.35MHz*/450kHz (* 30.05MHz for 25kHz version)

Sensitivity (Showing 8.33/25kHz version)

NAV COMWX

Less than 0dBµ (6dB S/N)


Less than –8dBµ (12dB SINAD)


Less than 0dBµ (12dB SINAD)

Squelch sensitivity (at threshold)

Less than 0dBµ (AM)

Less than –5dBµ (FM)

Less than 0dBµ

Selectivity 6dB60dB

More than 2.778kHz/7.5kHz (8.33/25kHz)

Less than 7.37kHz/25kHz (8.33/25kHz)

Spurious responseMore than 60dB (AM)

More than 30dB (FM)

More than 70dB

Hum and noiseMore than 40dB (USA/GEN)

More than 30dB (AUS)

More than 40dB

Audio output power (8Ω load) 470mW* typ. (* 500mW typ. for 25kHz version)

Ext. speaker connector 3-conductor 3.5 (d) mm (1⁄8ʺ)/8ΩAll stated specifi cations are subject to change without notice or obligation.

Applicable U.S. Military Specifi cations

StandardMIL 810F

Method ProcedureLow Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IRain Drip 506.4 IIIHumidity 507.4 –Salt Fog 509.4 –Dust Blowing 510.4 IVibration 514.5 IShock 516.5 I, IV

Also meets equivalent MIL-STD-810-C, -D and -E.

Supplied accessories: (* depending on version )

• Battery pack, BP-210N or battery case, BP-208N*• Belt clip, MB-103 • Carrying case, LC-159*• Wall charger, BC-167S* • Headset adapter, OPC-499*• Antenna, FA-B02AR • Handstrap

BATTERY PACK AND CASE

BP-210N Ni-MH 7.2V 1500mAh (min.) 1650mAh (typ.)

BP-208NBattery case6 × AA (LR6)

Charges the BP-210N in 2 hours (approx.).

Charges up to 6 BP-210N batteries simultaneously.

Charges the BP-210N in 2 hours (approx.).

AD-101

RAPID CHARGER RAPID CHARGER

BC-144N BC-119NBC-145S*1 BC-145S*1

RAPID MULTI-CHARGER

CP-20For operation with a 12V/24V socket

OPC-656For use with BC-121N

CIGARETTE LIGHTER CABLE &

DC POWER CABLE

SPEAKER-MICROPHONE HEADSET ADAPTER

CABLE

LEATHER BELT HANGERS

MB-96F MB-96N

BELT CLIPS

MB-86 MB-103

CARRYING CASECARRYING CASE

STANDARD ANTENNA• FA-B02AR : Same as supplied.

WALL CHARGER

BC-167S*2

*1 BC-145SA for 120V AC. SE for 230V AC. SV for 240V AC. *2 BC-167SA for 120V AC. SD for 230V AC. SV for 240V AC.

OPTIONS * Some options may not be available in some countries, or unavailable due to no T/A.

Please ask your dealer for details.


(Full keypad)

(Simple keypad)


700mW* loud audioBecause air band radios are usually operated in high-noise environments, it is essential for the radio to provide loud and clear audio. The IC-A14/S series employs a BTL amplifier that doubles the audio output, offering loud and clear audio that’ll cut throughcabin or tarmac noise. (* Internal speaker only)

Full keypad type or Simple keypad typeThe IC-A14 full keypad type allows you to input the channel or frequency directly and has an exclusive button for the 121.5MHz emergencychannel. The IC-A14 receives NAV and WXchannels. The IC-A14S simple keypad typeprovides simpler operation with a minimumof buttons that is suitable for ground crews.

Compact, light weight and rugged bodyThe IC-A14/S series is compact (only 120mm tall) and light weight (approx. 350g including antenna and BP-232N). The water resistant construction, equivalent to IPX4, provides reliable operation in wet conditions.

Large capacity Lithium-Ion battery packWith the 2000mAh large capacity Lithium-Ionbattery pack, BP-232N, the IC-A14/S seriesprovides stable output power and 18 hourslong (approx.) operating time*. The BP-261,battery case takes 6 AA (LR6) alkaline cellsfor convenient battery backup. * Typical operation, Tx:Rx: Stand-by=5:5:90. IC-A14S

200 channels with memory banksA total of 200* memory channels can be named withan 8-character channel name for easy recognition. Forfast and simple operation, these channels can begrouped into 10 memory banks*.* IC-A14 only. The IC-A14S has 100 memory channels and

memory banks are not available.

BC-179 holder type battery chargerThe battery charger, BC-179, securely holds andcharges the radio, even in bumpy conditions.

The cigarette lighter cable, CP-22, can beused with the BC-179.

Easy to Use, Rugged and Compactwith Icom's “V Speed” Audio!Easy to Use, Rugged and Compactwith Icom's “V Speed” Audio!

IC-A14

1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 Count on us!URL: http://www.icom.co.jp/world/index.html

Printed in Japan


Communication EquipmentHimmelgeister Str. 100,D-40225 Düsseldorf, GermanyPhone : +49 (0211) 346047Fax : +49 (0211) 333639E-mail : [email protected] : http://www.icomeurope.com


Unit 9, Sea St., Herne Bay, Kent, CT6 8LD, U.K.Phone : +44 (01227) 741741Fax : +44 (01227) 741742E-mail : [email protected] : http://www.icomuk.co.uk


Ctra. Rubi, No. 88 "Edificio Can Castanyer"08190, Sant Cugat del Valles, Barcelona, SpainPhone : +34 (93) 590 26 70Fax : +34 (93) 589 04 46E-mail : [email protected] : http://www.icomspain.com





Sopot, 3 maja 54, PolandPhone : +48 (58) 550 7135Fax : +48 (58) 551 0484E-mail : [email protected] : http://www.icompolska.com.pl


SPECIFICATIONS

• Frequency range : IC-A14 Tx (COM) 118.000–136.975MHz

Rx (COM, NAV) 108.000–136.975MHz(Weather) 161.650–163.275MHz

IC-A14S Tx/Rx (COM) 118.000–136.975MHz• Mode : AM (6K00A3E)

Weather (IC-A14 only) FM (16K0G3E)• Channel spacing : 25kHz• No. of memory channels :

IC-A14 200 channels with 10 banksIC-A14S 100 channels

• Antenna impedance : 50Ω (BNC type) • Power supply requirement : 7.4V DC (Icom battery pack) • Current drain (at 7.2 V DC) :

Tx 1.5ARx Max. audio 500mA

Stand-by 50mA typical• Operating temp. range : –10˚C to +60˚C ; +14˚F to +140˚F• Dimensions (W×H×D) : 53×120×36.9 mm

(projections not included) ; 23⁄32×423⁄32×17⁄16 in• Weight (approx.) : 350g; 12.3oz

(with antenna and BP-232N)

• Output power (at 7.4V DC) : 5.0/1.5W typ. (PEP/CW)• Modulation limiting : 70–100%• Frequency stability : ±5ppm• Audio harmonic distortion : Less than 10% (at 60% mod.)• Hum and noise ratio : More than 35dB• Spurious emissions : More than 46dB

(Except operating freq. ±62.5kHz point)• Microphone connector : 3-conductor 2.5 (d) mm

(1/10”)/ more than 150Ω

• Intermediate frequency : 1st/2nd 46.35MHz/450kHz• Sensitivity :

COM (at 6dB S/N) –6dBµ typ.NAV (at 6dB S/N) –3dBµ typ. (IC-A14 only)WX (at 12dB SINAD) –13dBµ typ. (IC-A14 only)

• Squelch sensitivity (at threshold) :AM Less than 0dBµFM (IC-A14 only) Less than –5dBµ

• Selectivity : More than 7.5kHz/–6dBLess than 25kHz/–60dB

07HY0190 © 2007 Icom Inc.

GENERAL TRANSMITTER

Measurement made in accordance with FCC Part 87 for USA versions. All specifications are subject to change without notice or obligation.

• Hum and noise : More than 35dB (at 30% mod.)• Spurious response :

AM More than 60dB FM (IC-A14 only) More than 30dB

• Audio output power : Internal speaker More than 700mW External speaker More than 500mW at 10% distortion with an 8Ω load, 30% modulation

• Ext. speaker connector : 3-conductor 3.5 (d) mm (1/8”)/ 8Ω

RECEIVER

OPC-499

Applicable U.S. Military Specifications & IP Rating


Low Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4-3 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IRain 506.4 I, IIIHumidity 507.4 –Salt Fog 509.4 –Dust Blowing 510.4 IVibration 514.5 I Shock 516.5 I, IVAlso meets equivalent MIL-STD-810-C, -D and -E.Ingress Protection StandardWater IPX4 (Water resistant protection)

HM-173

OPTIONS

CP-22 : Cigarette lighter cable with DC-DC converter foruse with BC-179. 12/24V DC input available.

OPC-515L : Power supply cable for use with BC-119N/160.OPC-656 : Power supply cable for use with BC-121N.

POWER SUPPLY CABLES

HM-173 : Provides conve-nient lightweight operation.

OPC-499 : For use withthird party headsets.

MB-94 : Alligator type. Same as supplied.MB-96F : Fixed type belt hanger.

SPEAKER-MIC HEADSET ADAPTERCABLE

FA-B02AR : Same as supplied.

BC-121N MULTI-CHARGER + AD-106 CHARGERADAPTER + BC-157 AC ADAPTERRapidly charges up to 6 battery packs (Six AD-106s arerequired). Charging the BP-232N in 3 hours (approx.).

MULTI-CHARGER

BC-121N+AD-106 (6 pcs.)

BC-157

BC-160 DESKTOP CHARGER+ BC-145 AC ADAPTER Charges the BP-232N in 3 hours (approx.).BC-119N + AD-106 + BC-145 is alsoavailable.

BP-230N :7.4V/980mAh Li-Ion BATTERY PACKProvides 8.5 hours* operating time (approx.). BP-232N :7.4V/2000mAh Li-Ion BATTERY PACKProvides 18 hours* operating time (approx.). BP-261 :BATTERY CASE (Available soon)Battery case for AA (LR6)×6 alkaline cells.(* Tx (Hi): Rx: standby=5:5:90.)

OPC-515L CP-22 OPC-656

BP-230N BP-232N

* Some options may not be available in some countries. Please ask your dealer for details.

BC-179 BATTERY CHARGER + BC-174 AC ADAPTER Charges the BP-232N in 12 hours (approx.). BC-171 DESKTOP CHARGER+ BC-147 AC ADAPTERCharges the BP-232N in 10 hours (approx.).

REGULAR CHARGERS

BC-174

BC-179

BC-171

MB-94

BELT CLIP AND LEATHER BELT HANGER

FA-B02AR

ANTENNA

MB-96F

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.

RAPID CHARGER

Other outstanding features• 5W typ. (PEP), 1.5W (CW) output power • Side tone function allows you to hear your own

voice via a third party aviation headset• LCD backlight for night time operation

• ANL (Auto Noise Limiter) for noise reduction• Low battery indication and beep alert• Adjustable microphone gain setting• BNC type antenna connector

BC-160 BC-145

Supplied accessories: (* depending on version )

• Battery pack, BP-232N or battery case, BP-261*• Battery charger, BC-179* • AC adapter, BC-174A/E*• Belt clip, MB-94 • Antenna, FA-B02AR• Handstrap

HF TRANSCEIVER

The IC-78 is a high performance HF transceiver. Innovative features suchas 99 memory channels, high C/N ratio, direct channel entering, data com-munication capabilities and more, offer easy operation for anyone. All thesefeatures come in a compact, rugged package that can be conveniently usedin a base station or in a vehicle, as you prefer.

Reliablestraight forward

HF communications

With the speaker facing the operator, audiosounds can be clearly heard without im-pediment during operation. It is no longernecessary to manually increase the volumeto try and capture audio sounds.

When the optional CR-338 HIGH STABILITY

CRYSTAL UNIT is installed, it allows up to±0.5 ppm of extremely high stable operation.

Durable, powerful construction

Flexible filter selection

High frequency stability

Front mounted loud speaker

An optional IF filter can be installed into thetransceiver, providing 5 passband widthsselectable in SSB, CW or RTTY modes.

VFO mode operation*

For continuous frequency operation, VFOmode operation* capability is available. It isconvenient when searching for signals,around the programmed frequencies, suchas short wave broadcasts, etc.*depending on version

Superior basic performance

A 4-element system is employed for the 1streceive mixer, providing superior receiveIMD, especially from in-band, nearby inter-fering signals. A well-designed double-con-version system to help minimize image andspurious responses for better signal fidelity,is also built-in. A newly designed PLL circuithas been adopted to improve C/N ratiocharacteristics. The combination of the 4-element system mixer and new PLL circuitallows superior basic performance.

An affordable 99 duplex memory channelsare available for storing individual transmitand receive frequencies, operating mode,filter setting, as well as 8-character channelnames. You can enter channel assign-ments easily from the 10-key pad. In addi-tion, an extra 1 call memory is available forstoring the most often used, or most impor-tant frequency. An independent, one-touchrecall switch is available.

The IC-78 is equipped with a large easy-to-read LCD. A minimum number of switchesand controls allow for superior feature se-lectability. Keys access functions directly–there’s no secondary function key. You canenter your operating frequency*, or mem-ory channel number directly from the 10-key pad.*depending on version

Simple operation

Ample 99 channels with 8-digit channel name capabilityThe IC-78 delivers a powerful 100 W of out-

put power, providing the talk power youneed to reach the most distant locations. Itsone-piece, die-cast aluminum constructioncombined with a large heat sink, helpskeep internal temperatures down and en-sures that operation is stable at high dutycycles. And its compact size of 240(W)×95(H)×239(D) mm* makes installation easy.*97⁄16(W)×33⁄4(H)×913⁄32(D) in.

Direct channel selection

A 10-key pad has been adopted onthe front panel. A channel number,or an operating frequency*, can beentered from the keypad directly.Also, memory channel editing ispossible. A large channel selectorand up/down keys are available tosuit your operating style for yourconvenience. Total and simple oper-ation is provided!*depending on version

Cloning capability

Programmed data cloning capabilitybetween transceivers is available,so that an identical transceiver set-ting can be made immediately.

Built-in 2-tone alarm*

The 2-tone alarm for an emergencysignal transmission is built-in*. Inde-pendent tone switch is adopted forquick and simple emergency calls.*depending on version

Data communications

In addition to the current voice andkey operation, FSK (First Shift Keying)type RTTY mode is available. Byconnecting a terminal unit or termi-nal node controller to the ACCsocket on the rear panel, data ac-quisition and text-base file transfersand other data communication canbe made. On RTTY, shift width, tonefrequencies and polarization arealso selectable.

Superior features support serious communications

Noise blanker

To reduce pulse-type noise, a leveladjustable noise blanker is built-in.Various levels of pulse-type noise,such as from car ignitions, etc., canbe reduced.

Pre-amp. and attenuator

A pre-amplifier and an RF attenua-tor are adopted for more pleasantreception. Convenient when weaksignals or extremely strong signalsare received, to present better qual-ity readability.

SQL/RF gain controller

In addition to the squelch control,an RF gain control is available, andthe controller is combined with thesquelch control. The RF gain ad-justs minimum response receivergain, and ignores signals weakerthan the pre-set level— providingpleasant stand-by, or scanning. TheSQL/RF GAIN controller action isselectable from squelch only, RFgain only or combined, in the SETmode according to your operatingstyle and mode.

Other features

• Built-in mic. compressor increasesaverage talk power

• Complete CW features• Variety of scanning function types • IF shift interference rejection• Built-in antenna tuner control circuit

and selectable antenna tuner• Hand microphone is supplied• VOX capability, and more...

MB-23 CARRYING HANDLEFor easy portability.

• Frequency range : Rx 0.030–29.999999 MHz*1

Tx 1.600–29.999999 MHz*2

*1Guaranteed range: 0.5–29.999999 MHz*2Not guaranteed for some frequency bands

• Mode : USB, LSB, CW, RTTY (FSK), AM• Number of memory Ch. : 99 (Duplex) +1 (Call channel)• Frequency stability : Less than ±200 Hz from 1 min. to

60 min. after power ON. After thatrate of stability less than ±30 Hz/hr.at +25˚C (+77˚F). Temperature fluc-tuations 0˚C to +50˚C (+32˚F to+122˚F) less than ±350 Hz

• Power supply requirement: 13.8 V DC ±15 % (negative ground)• Current drain (at 13.8 V DC):

Receive Stand-by 1.3 Amax. audio 2.0 A

Transmit max. power 21.0 A• Operating temp. range : –10˚C to +60˚C; +14˚F to +140˚F• Antenna connector : SO-239 (50 Ω)• Dimensions : 240(W)×95(H)×239(D) mm

(projections not included) 97⁄16(W)×33⁄4(H)×913⁄32(D) in• Weight (approx.) : 3.8 kg; 8 lb 6 oz• ACC connector : 13-pin• REMOTE connector : 2-conductor 3.5 (d) mm (1⁄8″)

• Modulation system :SSB Balanced modulationAM Low level modulation

• Output power :SSB, CW, RTTY 2–100 WAM 2–35 W

• Spurious emissions : Less than –46 dB below peak out-put power

• Carrier suppression : More than 40 dB• Unwanted sideband : More than 50 dB• Microphone connector : 8-pin connector (600 Ω)• KEY connector : 3-conductor 6.5 (d) mm (1⁄4″)• SEND connector : Phono (RCA)• ALC connector : Phono (RCA)

• Receiver system : Double-conversion superheterodyne• Sensitivity (10 dB S/N) :

SSB, CW, RTTY 0.16µV (1.600–29.999999 MHz)(0.5 µV at 12 dB SINAD)

AM 13 µV (0.5–1.599999 MHz)2 µV (1.600–29.999999 MHz)

• SQL sensitivity : Less than 5.6 µV (SSB)

• Selectivity :SSB, CW, RTTY More than 2.1 kHz/–6 dB

Less than 4.5 kHz/–60 dBAM More than 6.0 kHz/–6 dB

Less than 20 kHz/–40 dB• Spurious and image : More than 70 dB

rejection ratio (1.600–29.999999 MHz)• Audio output power : More than 2.0 W at 10% distortion

(at 13.8 V DC) with an 8 Ω load• PHONES connector : 3-conductor 6.5 (d) mm (1⁄4″)• EXT SP connector : 2-conductor 3.5 (d) mm (1⁄8″) /8 Ω


Printed in Japan












00ET008J* © 2000–2011 Icom Inc.

HF TRANSCEIVER

GENERAL

SPECIFICATIONS

OPTIONS

RECEIVER

Supplied accessories:

• Hand microphone • DC power cable• Spare fuses

HM-36 HAND MICROPHONESame as that supplied.

CT-17 CI-V LEVELCONVERTER

For remote transceiver controlfrom a PC equipped with an RS-232C port.

AH-4 AUTOMATIC ANTENNATUNER

Covers 3.5–30 MHz with a 7 m(23 ft) or longer wire antenna.

TRANSMITTER

CR-338 HIGH STABILITYCRYSTAL UNIT

Contains a temp. compensatingheater for improved frequency sta-bility. Frequency stability: ±0.5 ppm

AH-2b ANTENNA ELEMENTFor mobile operation with the AH-4. All bands between 7–30 MHzcan be matched.

455 kHz FILTERSFL-52A CW/RTTY narrow; 500Hz/–6 dBFL-53A CW narrow; 250Hz/–6 dBFL-222 SSB narrow; 1.8kHz/–6 dBFL-257 SSB wide; 3.3 kHz/–6 dB

AH-710 FOLDED DIPOLE ANTENNA

Covers from 1.9 to 30 MHz. Has aSO-239 connector. Easy to as-semble (non-kink construction).

MN-100 ANTENNA MATCHERMatch the transceiver to a dipoleantenna without applying DCpower. 8 m×2 antenna wires comeattached.

MN-100L ANTENNA MATCHERMatch the transceiver to a long-wire antenna without applying DCpower. 15 m×1 antenna wirecomes attached.

All stated specifications are typical and subject to change with-out notice or obligation.

IC-MB5 MOBILE BRACKETFor insatlling the transceiverunder a table, in a vehicle, etc.

PS-125 DC POWER SUPPLYCompact power supply with highcurrent capability. Output: 13.8 V DC (25 A max.)

SP-21 EXTERNAL SPEAKERInput impedance: 8ΩMax. input power: 5W

SP-23 EXTERNAL SPEAKER4 audio filters; headphone jack.Input impedance: 8ΩMax. input power: 5W(Not available for EU countries)

approx. 24.5 m; 80.3 ft

AT-140 HF AUTOMATIC ANTENNA TUNERCovers 1.6–30 MHz with a 7 m(23 ft) or longer wire antenna.AT-130/E is also available.

SM-27 DESKTOPMICROPHONEDynamic microphone with PTTlock switch.

SM-50 DESKTOPMICROPHONEDynamic microphone. Includes[UP]/[DOWN] switches and low cutfunction.

SM-30 DESKTOPMICROPHONECompact, lightweight electret mi-crophone. SM-20 is also available.

Digital voice recorder (DVR)Record your callsign, CQ, or other information in 4 transmit play-back memories with alphanumeric labels. A total of 90 seconds isavailable for the four memories. A front panel REC control allowsyou to record incoming signals, too! The DVR makes portable con-testing or mini-expeditions a breeze!

Flexible installation with detachable panelSmaller than the IC-706MKIIG, the IC-7000 measures only167(W)×58(H)×180(D) mm*1. With the detachable front panel*2 manyinstallation possibilities are available. *1 69⁄16(W)×29⁄32(H)×73⁄32(D) in*2 An optional separation cable is required

Remote control MicrophoneThe supplied HM-151 remote control micro-phone allows you to control often usedfunctions of the IC-7000. This includes bandhopping with Icom’s Triple Band Stack reg-isters.

2-mode band scopeThe band scope function lets you watchconditions around the band. In Centermode the band scope is centered on the re-ceiving frequency. In Fixed mode the bandscope sweeps a fixed range.

2 ×× DSPThat’s two times the DSP in the IC-7000 that will leave many basestation rigs in the noise! While it is too early to list all the great fea-tures, here are a few to keep you talking!

Improved AGC loop performanceWith Multiple AGC loops, you will never experience AGC pumpingfrom a signal filtered out by the DSP! The digital IF filter and manualnotch filter are included in the AGC loop, so you will never encounterAGC blocking. As with the 756PROIII and IC-7800, the AGC time con-stants are adjustable for slow, middle, fast for each operating mode.

Digital IF filtersAll the filters you want at your fingertips! You will never have to pur-chase “Optional” filters as the IC-7000 has 41 different filter widths.You just dial in the width you want and select whether you want asharp or soft filter shape for SSB and CW modes. Then to pull-inthe the weak ones, a quick turn of the the concentric twin PBTknobs, allow you to either narrow the IFpassband, or shift the entire passband toeliminate the QRM.

2 ×× MNF (Manual Notch Filter)Pull out the weak signals in crowded band conditions with Icom’sNEW two-point MNF manual notch filter. Apply 70 dB of rejection totwo signals at once! Notch width is ad-justable – wide, medium, and narrow – andan auto-tuning notch filter is available, too.

HM-151

Manual notch filter setting

IF filter setting screen

GENERAL• Frequency coverage*1 :

Receive 0.030–199.999MHz*2 400.000–470.000MHz*2

Transmit 1.800– 1.999MHz 3.500– 3.999MHz5.3305, 5.3465, 5.3665, 5.3715, 5.4035MHz*3

7.000– 7.300MHz 10.100–10.150MHz14.000–14.350MHz 18.068–18.168MHz21.000–21.450MHz 24.890–24.990MHz28.000–29.700MHz 50.000–54.000MHz

144.000–148.000MHz 430.000–450.000MHz*1 Showing USA version. Varies according to version.

*2 Some frequency bands are not guaranteed. *3 USB only• Mode : USB, LSB, CW, RTTY, PSK31, AM,

FM, WFM (Rx only)• No. of memory channels : 503 (495 regular, 2 call, 6 scan edges)• Antenna impedance : 50 Ω (SO-239×2 for HF/50 MHz and

VHF/UHF)• Power supply requirement : 13.8V DC ±15%• Operating temp. range : –10°C to +60°C; +14°F to +140°F• Frequency stability : Less than ±0.5ppm (+0°C to +50°C)• Current drain : Transmit Max. power 22A

Receive Standby 1.3AMax. audio 1.6A

• Dimensions (W×H×D) : 167×58×180 mm; 69⁄16×29⁄32×73⁄32 in(projections not included)

• Weight (approx.) : 2.3kg; 5.1lb

TRANSMITTER• Output power :

• Spurious emissions : Less than –50dB (Below 30MHz)Less than –60dB (Above 50MHz)

• Carrier suppression : More than 50dB• Unwanted sideband : More than 50dB

suppression

RECEIVER• Intermediate frequencies :

SSB/CW/AM/FM 124.487MHz, 455kHz, 16.15kHzWFM 134.732MHz, 10.700MHz

• Sensitivity (preamp on; except 4–4.5 and 8–9 MHz):

• Squelch sensitivity : SSB Less than 5.6µV(threshold; pre-amp on) FM Less than 0.3µV

• Selectivity :SSB (BW=2.4kHz) More than 2.4kHz/–6dB

Less than 3.9kHz/–60dBCW (BW=500Hz) More than 500Hz/–6dB

Less than 900Hz/–60dBRTTY (BW=350Hz) More than 360Hz/–6dB

Less than 650Hz/–60dBAM (BW=6kHz) More than 6.0kHz/–6dB

Less than 15kHz/–60dBFM (BW=15kHz) More than 12kHz/–6dB

Less than 20kHz/–60dB• Spurious and image rejection ratio:

HF bands More than 70dB50/144/440MHz More than 65dB

(except 144MHz IF point)• Audio output power : More than 2.0W (at 13.8V DC)

(8Ω load, 10% distortion)

1-1-32, Kamiminami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 Count on us!URL: http://www.icom.co.jp/world/index.html

Printed in Japan


Communication EquipmentHimmelgeister Str. 100, D-40225 Düsseldorf, GermanyPhone : +49 (0211) 346047Fax : +49 (0211) 333639E-mail : [email protected] : http://www.icomeurope.com

A.B.N. 88 006 092 575Unit 1 / 103 Garden Road,Clayton VIC 3168 AustraliaPhone : +61 (03) 9549 7500Fax : +61 (03) 9549 7505 E-mail : [email protected] : http://www.icom.net.au


Zac de la Plaine, 1, Rue Brindejonc des Moulinais BP 5804, 31505 Toulouse Cedex, FrancePhone : +33 (5) 61 36 03 03Fax : +33 (5) 61 36 03 00E-mail : [email protected] : http://www.icom-france.com

Crta. de Gracia a Manresa Km. 14,75008190 Sant Cugat del Valles Barcelona, SpainPhone : +34 (93) 590 26 70Fax : +34 (93) 589 04 46E-mail : [email protected] : http://www.icomspain.com






JP98/14190QA TW03/00288EM

Icom Inc. (Japan), is an ISO 9001 and ISO 14001 certification acquired company. 05WK0070 © 2005 Icom Inc.

SPECIFICATIONS OPTIONS

Supplied accessories:• Hand microphone • DC power cable • Spare fuses• Key plug • Electronic keyer plug • ACC cable

HF/50MHz 144MHz 440MHzSSB/CW/RTTY/FM 2–100W 2–50W 2–35W

AM 1–40W 2–20W 2–14W

0.5–1.8MHz 1.8–29.9MHz 50–54MHz 144/440MHzSSB/CW – 0.15µV 0.12µV 0.11µV

AM 4.0µV 2.0µV 1.0µV 1.0µVFM – 0.5µV (28–29.7) 0.25µV 0.18µV

WFM – – 10.0µV (76–108MHz) SSB/CW, AM : 10dB S/N, FM, WFM : 12dB SINAD

2.5-inch color TFT display with TV screen receive capabilityThe IC-7000’s display presents numbers and indicators in bright, con-centrated colors for easy recog-nition. You can choose from 3background colors and 2 fontstyles to suit your preference.Not only does the display pro-vide radio status, but you canwatch NTSC M or PAL B onVHF-TV channels!** Not available in all versions

One-touch operationEight of the most-used radio functions are controlled by dedicatedfunction keys grouped around the display for easy visibility. Onequick touch turns the function and off. A longer touch activates ad-justment of the function’s setting.

Memory KeyerThe internal memory keyer provides 4 memories for station infor-mation or contest exchanges, calling CQ and call sign with up to 55characters for each memory. The keyer also performs automatic re-peat, automatic contest serial numbers, and “cut-numbers”.

Other features[Installation] • Control circuit for optional antenna tuners[Operation] • Built-in voice synthesizer • CI-V control capability • Auto repeater functions • Total of 503 channels • Quick band change• Multi-function S/PWR/SWR meter • Backlit buttons • 24-hour Clock[Receiver] • Preamp • Attenuator • 100-step digital noise blanker• 16-step digital noise reduction • RIT • CTCSS, DTCS tone squelch[Transmitter] • ±0.5 ppm high frequency stability • Continuously ad-justable RF output power • Digital RF speech compressor • Pow-erful 35W on 70cm band • Bass and treble audio equalizer • Adjustable SSB transmit bandwidth • DTMF memory • ∂TX • VOX[CW] • Full break-in • CW reverse sideband • Adjustable CW pitch

• AT-180 HF+50MHz AUTOMATIC ANTENNA TUNER• AH-4 HF+50MHz AUTOMATIC ANTENNA TUNER• AH-2b ANTENNA ELEMENT• CT-17 CI-V LEVEL CONVERTER• HM-151 REMOTE-CONTROL MICROPHONE• SM-20 DESKTOP MICROPHONE

Optional OPC-589 is required.

• SP-10 EXTERNAL SPEAKER• MB-62 MOBILE BRACKET for main unit or the AT-180• MB-105 CONTROLLER MOUNTING BRACKET• MB-65 MOUNTING BASE

Optional MB-105 is required.

• MB-106 CARRYING HANDLE• OPC-1443/OPC-1444 SEPARATION CABLES

OPC-1443: 3.5 m (11 ft), OPC-1444: 5 m (16 ft)

• OPC-589 MODULAR 8-PIN CABLE ADAPTERFor using a 8-pin type microphone.

• OPC-598 ACC 13 PIN CABLE FOR AT-180 (7 m)• OPC-599 ACC 13 PIN CABLE ADAPTER

For IC-PW1/EURO• OPC-742 ACC 13 PIN CABLE FOR AT-180 WITH

2 m/70 cm LINEAR AMPLIFIER• IC-PW1/EURO HF+50 MHz 1 kW LINEAR AMPLIFIER

2 exciter inputs are available. OPC-599 is required.

This device has not been approved by the appropriate authorities in each country. This device may not be sold orleased, or be offered for sale or lease, until approval has been obtained. All stated features, appearances, screenshots and specifications may be subject to change without notice. All screens show simulated pictures.

REAR VIEW

READ ALL INSTRUCTIONS carefully and completely before using the transceiver.

Rugged and reliable for seriousground crew communicationsSetting a new standard for ground based communications,the IC-A110 /EURO provide durability and reliability in de-manding operational environments.

Capable of being installed in any vehicleIC-A110/EURO are adaptable to vehicles working on a 12 V,as well as a 24 V power source.

Front mounted loud speakerA loud speaker mounted in the front of the transceiver is free ofany obstacles blocking audio reproduction. And 10 W, of pow-erful output power is available for the external speaker.

Dial selectionWith a simple rotation of the dial, frequently used memory chan-nels, or desired frequency selection can be made.

Memory channel name capabilityUp to 7-character memory names can be assigned for eachchannel. Allows simple and quick channel recognition and se-lection.

Side tone functionOperator’s transmitted messages and calls are audio modu-lated and can be heard by standard airband headsets*, even inthe most demanding operating airport conditions.*Option OPC-871 is necessary when using standard type headset.

Convenient on hook scan functionsHanging the microphone on the mic. hanger activates the autoscan function. When released, the transceiver will return to thelast used, or priority channel, depending on the selection.

Usable in extreme cold The adopted LCD guaranteed usable in temperatures from–30˚C to +70˚C (–22˚F to +158˚F). Normal performance, as wellas display indications, are guaranteedeven in extremely cold areas.


SPECIFICATIONS

ADDITIONAL FEATURES• Additional to the predominantly used 25 kHz channel spacing, an extra

version complying to new regulations is available for 8.33 kHz channelspacing

• Equipped EEPROM system provides maintenance free memory backupcapability, without the use of a separate backup battery

• Various scan functions, such as VFO and priority scans are available• Limited number of keys for simple manipulation, but providing advanced

multi-functions

• A total of 20 memory channels are available• Ideal compact size of 150(W)×50(H)×180(D) mm* to mount in various

types of vehicles*529⁄32(W)×131⁄32(H)×73⁄32(D) in

• 36 W (pep) of powerful output• Excellent durability to cope with even the toughest workplace• Memory channel only operation possible via PC programming• Hand microphone supplied


Printed in Japan













OPTION

00YT001L © 2000–2006 Icom Inc.

OPC-871 HEADSET ADAPTERFor connection with standard airband headset.

HM-161 HAND MICROPHONESame as supplied.

• Frequency range : 118.000–136.975 MHz• Channel spacing : 8.33/25 kHz auto selection

(according to version) or 25 kHz only• Mode : 6K00A3E (AM)• No. of memory Ch. : 20• Antenna connector : SO-239 (50 Ω)• Power supply requirement:

(negative ground) 13.75 V DC or 27.5 V DC automatic selection

• Current drain (at 13.75 V DC):Transmitting 5.0 A max.Receiving 4.0 A (at AF max.)

0.5 A (at stand-by)• Operating temperature range:

IC-A110 –30˚C to +60˚C; –22˚F to +140˚F

IC-A110EURO –20˚C to +55˚C • Frequency stability :

IC-A110 ±5 ppm (–30˚C to +60˚C)IC-A110EURO ±1 ppm (0˚C to +40˚C)

• Dimensions : 150(W)×50(H)×180(D) mm(projections not incl.) 529⁄32(W)×131⁄32(H)×73⁄32(D) in

• Weight (approx.) : 1.5 kg; 3 lb 5 oz

• Output power : 36 W typ. pep (9 W typ. for CW)• Modulation limiting : 70–100% (IC-A110)• Modulation compression*: Linear 85%

Max. 95%• AF harmonic distortion : Less than 10% (at 85% mod.)• Hum and Noise ratio : More than 40 dB• Spurious emissions :

IC-A110 Less than –16 dBm IC-A110EURO

9 kHz to 1 GHz Less than –46 dBm(Less than –36 dBm for harmon-ics in 30 MHz to 1 GHz range)

1–4 GHz Less than –40 dBm (Less than –30 dBm for harmonics)

• Adjacent Ch. power* : Less than 60 dB (25 kHz)Less than 50 dB (8.33 kHz)

• Microphone connector : 8-pin modular (600 Ω)

• Receiving system : Double conversion super-heterodyne

• Intermediate freq. : 1st 38.85 MHz2nd 450 kHz

• Sensitivity (pd) : IC-A110 Less than 1 µV (at 6 dB S/N)IC-A110EURO Less than +5 dBµV

(at 12 dB SINAD)• Squelch sensitivity (pd; at threshold):

IC-A110 Less than 0.3 µVIC-A110EURO Less than –6 dBµV

• Selectivity : 25 kHz Ch. spacing More than ±8 kHz (at –6dB)

Less than ±17 kHz (at –40dB)Less than ±25 kHz (at –60dB)

8.33 kHz Ch. spacing More than ±2.778 kHz (at –6dB)Less than ±7.37 kHz (at –60dB)

• Spurious response : More than 74 dBµ (IC-A110)More than 70 dB (IC-A110EURO)

• Intermodulation rejection ratio*: More than 64 dB

• Blocking/desensitisation*: More than 70 dB • Cross modulation rejection*:

More than 70 dB • Audio output power (at 13.75 V; 10% dist.; 60% mod.):

Internal speaker 1.5 W typical w/8 Ω loadExternal speaker More than 10.0 W w/8 Ω loadHeadset (side tone) More than 0.1 W w/500 Ω load

• AF output impedance : EXT SP 8 ΩHeadset (side tone) 500 Ω

GENERAL TRANSMITTER RECEIVER

Measurements made in accordance with RTCA D0-186a(Class C/E, Class 4/6) or EN 300 676. All stated specificationsare and subject to change without notice or obligation.

*These specification items are not available for the IC-A110 due toapproval test specifications.

Type approval for the IC-A110/EURO varies between countries.Ask your dealer for availability.

Supplied Accessories Hand microphone, HM-161 DC power cable Mounting bracket kit Microphone hanger kit Fuses

Applicable U.S. Military SpecificationsIcom makes rugged products that have been tested to andpassed the following MIL-STD requirements and strict envi-ronmental standards.

Standard MIL 810 C MIL 810 D MIL 810 EMethod Proc. Method Proc. Method Proc.

Low Pressure 500.1 I 500.2 I, II 500.3 I, IIHigh Temp. 501.1 I 501.2 I, II 501.3 I, IILow Temp. 502.1 I 502.2 I, II 502.3 I, IITemp. Shock 503.1 I 503.2 I 503.3 ISolar Radiation 505.1 I 505.2 I 505.3 IRain 506.1 I, II 506.2 I, II 506.3 I, IIHumidity 507.1 I, II 507.2 II, III 507.3 II, IIISalt Fog 509.1 I 509.2 I 509.3 IDust 510.1 I 510.2 I 510.3 IVibration 514.2 VIII, X 514.3 I 514.4 IShock 516.2 I, II, IV 516.3 I, IV 516.4 I, IV

16ch (F15/F25)

Max. 4ch (F15S/F25S)

2-Tone, 5-Tone

CTCSS, DTCS

Tough and

reliable

15-16 hrs. operating

time with BP-232N

Optional voice

scrambler

VHF AND UHF TRANSCEIVERS

(UHF transceiver, toggle type)

(VHF transceiver, toggle type)

(UHF transceiver, rotary type)

(VHF transceiver, rotary type)

Tough and reliable constructionThe IC-F15/S series is built around an alu-

minum die-cast chassis and covered with

tough polycarbonate casing. This radio is

built to last. Its dual slide rail securely locks

the battery to the radio. The battery termi-

nal is covered with a non-corrosive rubber

packing. The belt clip is clamped between

the radio and the battery, making it nearly

impossible to knock loose.

Simple operationHaving only 3 buttons, volume and chan-

nel knobs, the IC-F15/S series does not

require special training to use. Positive

button action for sure operation even

when wearing gloves, allows you to get

down to the business of communicating

without fuss.

Wide frequency coverageThe IC-F15/S series covers a wide fre-

quency range with one version (136–174,

400–470MHz). Wide, middle and narrow

channel spacing* is programmable per

channel. (* Programmable 25/12.5kHz or 20/12.5kHz)

The IC-F15/S series shows Icom’s

sign. Simple operation for every

tool for your daily business. Its

sistant to shock and vibration. Th

locks the battery pack to the rad

age, Li-Ion battery pack, loud and

and option unit connector comb

performance, the IC-F15/S series

tions.

Built to last, built to work!

UT-108: Provides DTMF decoder capabilities.UT-109 (#01): Up to 32 scrambling codes are available. UT-110 (#01): Up to 1020 scrambling codes are available. UT-124: Automatically sends an emergency signal when the trans-

ceiver is left in a horizontal position for a preset time.

MB-130: Vehicle charger bracket for use with BC-160.

OPTIONS

STUBBY ANTENNAS• FA-SC56VS : 150–162MHz• FA-SC57VS : 160–174MHz• FA-SC73US : 450–490MHz

CUT ANTENNAS• FA-SC61VC : 136–174MHz• FA-SC61UC : 380–520MHzCut the antenna element to tune to a specifi c center frequency.

ANTENNAS• FA-SC25V : 136–150MHz• FA-SC55V : 150–174MHz• FA-SC25U : 400–430MHz• FA-SC57U : 430–470MHz

Some options may not be available in some countries. Please ask your dealer for details.

Lithium-Ion battery standardThe IC-F15/S series comes with a high ca-

pacity 2000mAh (typ.) Li-Ion battery pack,

BP-232N, as standard. Li-Ion batteries

have virtually no memory issues and al-

lows you fl exible charging.

Optional boardThe IC-F15/S series has an expansion

socket for adding an optional board. Voice

scrambler, man down and DTMF decoder

features are available, depending on the

installed board.

Most popular signalings built-inUse the built-in 2-Tone, 5-Tone, CTCSS

and DTCS capabilities as standard to set

up your own talk groups and quiet stand-

by when others are talking.

Multiple 2-Tone, Multiple 5-ToneUp to 10 2-Tone/8 5-Tone codes can be

decoded on a channel. When a matched

tone is received, the following items are

programmable for each code.

• Beep sound • Answer back • Stun

• LED blink • Scan

Other features• LED low battery alert

• TOT function and lock out penalty timer

• 2 step power saver

• Normal and priority scan

• 500mW loud and clear audio

• Optional VOX headset

• PC programming capability

• Embedded ESN (Electronic serial number)

• PTT ID function (Transmit only) automati-

cally sends your own ID number when

the PTT button is pushed/released

s new direction in PMR radio de-

yone but a powerful and reliable

very durable construction is re-

he dual rail guide design securely

dio. Wide range frequency cover-

d clear audio, built-in signalings

bined with Icom grade electrical

will easily exceed your expecta-

BP-240 BP-230N BP-232N BP-232H

BC-121N MULTI-CHARGER + AD-106 CHARGER ADAPTER + BC-157 AC ADAPTERRapidly charges up to 6 battery packs (Six AD-106s are required).Charging time: approx. 3 hours when BP-232N is attached.

OPC-656 DC POWER CABLE :For use with the BC-121N. (12–20V DC required).

HM-153LA : Durable earphone-microphone with revolving clip.HM-158LA : Compact and durable body with plug screw connector.HM-159LA : Full size durable speaker microphone.HM-166LA : Light-weight earphone microphone with revolving clip.SP-13 : EARPHONE Provides clear audio in noisy environments.

HS-94 : Earhook headset with fl exible boom microphone. HS-95 : Behind-the-head headset with fl exible boom microphone.HS-97 : Throat microphone fi ts around your neck and picks up

speech vibration.VS-1L : PTT/VOX unit. Required when using these headsets with

the radio.

CP-17L CIGARETTE LIGHTER CABLE, OPC-515L DC POWER CABLEFor use with the BC-160 or BC-119N. (12–16V DC required).

MB-93 : Swivel type belt clip.MB-94 : Alligator type. Same as supplied.MB-96N : Swivel type belt hanger. MB-96F : Fixed type belt hanger.

MULTI-CHARGER

BC-121N+AD-106 (6 pcs.) OPC-656 BC-157S

BELT CLIPS AND LEATHER BELT HANGERS

MB-96F MB-93

INTERNAL UNITS

UT-109 VOICE

SCRAMBLER UNIT

UT-108 DTMF

DECODER MB-130UT-124 MAN

DOWN UNIT

UT-110 VOICE

SCRAMBLER UNIT

HEADSETS and PTT/VOX UNIT

HS-95

HS-94 HS-97

SPEAKER-MICROPHONES HM-158LA

HM-159LAHM-166LA

HM-153LA

VS-1L

REGULAR CHARGER

BC-171

BC-147S BC-145S

RAPID CHARGER POWER SUPPLY CABLES

CP-17L OPC-515L

BC-160

Battery packs

Type CapacityOperating

time*Output power

(VHF/UHF)

BP-230NLi-Ion, 7.4V

950mAh (min.)

980mAh (typ.)9 hours 5W/4W

BP-232NLi-Ion, 7.4V

1900mAh (min.)


BP-232HLi-Ion, 7.4V

2250mAh (min.)


BP-240AAA (LR03) batteries × 6

– 1W

* Operating time is approximate time (at 20˚C). Tx: Rx: standby=5:5:90. Power save on.

BC-171 DESKTOP CHARGER + BC-147*1 AC ADAPTER Charges the BP-232N in 10 hours (ap-prox.).

*1 BC-145/BC-147SA for 120V AC. SE for 230V AC. SV for 240V AC.

BC-160 DESKTOP CHARGER + BC-145*1 AC ADAPTER Charges the BP-232N in 3 hours (approx.).

BC-119N + AD-106 + BC-145*1 is also

available. : Charges the BP-232N in 3

hours (approx.).

BATTERY PACKS AND CASE

VEHICLE CHARGER

BRACKET

• Frequency range :

IC-F15/IC-F15S 136–174MHz

IC-F25/IC-F25S 400–470MHz

• Number of channels : 16 (IC-F15, IC-F25)

4 (Max., IC-F15S, IC-F25S)

• Channel spacing : 12.5kHz/20kHz/25kHz

• PLL channel step : 2.5kHz, 3.125kHz (VHF)

5kHz, 6.25kHz (UHF)

• Power supply requirement : 7.2V DC

• Current drain (at 7.2V DC; approx.):

Transmit VHF (5W) 1.5A

UHF (4W) 1.6A

Receive stand-by 70mA

rated output 300mA

• Antenna impedance : 50Ω

• Usable temperature range : –25˚C to +55˚C

• Dimensions (with BP-232N) : 53 (W) ×120 (H) ×42.4 (D) mm

(projections are not included)

• Weight : 296g (approx. with BP-232N)

• Output power : 5W (VHF), 4W (UHF)

• Max. frequency deviation : ±5kHz (Wide)

±4kHz (Middle)

±2.5kHz (Narrow)

• Frequency error : ±2.5ppm

• Spurious emissions : 0.25μW (below 1GHz)

1.0μW (above 1GHz)

• Adjacent channel power :

VHF 80/80/70dB typ. (Wide/middle/narrow)

UHF 75/73/68dB typ. (Wide/middle/narrow)

• Audio harmonic distortion : 3% typ. (AF 1kHz, 40% deviation)

• Modulation limiting : 60–100% of max. deviation

• External microphone connector :

3-conductor 2.5 (d) mm /2.2kΩ

• Sensitivity : –4dBμV typ. (emf, at 20dB SINAD)

• Squelch sensitivity : –4dBμV typ. (emf, at threshold)

• Adjacent channel selectivity :

VHF 75dB typ. (Wide, middle)

65dB typ. (Narrow)

UHF 75/73/65dB typ. (Wide, middle, narrow)

• Spurious response : 70dB

• Intermodulation : 67dB typ.

• Hum and noise ratio : 55dB typ. (Wide)

(with CCITT FILTER) 53dB typ. (Middle)

50dB typ. (Narrow)

• Audio output power : 500mW typ.

(at 5% distortion with an 8Ω load)

• External speaker connector : 2-conductor 3.5 (d) mm/8Ω

Printed in Japan

Count on us!

Your local distributor/dealer:2380 116th Avenue NE, Bellevue, WA 98004, U.S.A.Phone : +1 (425) 454-8155Fax : +1 (425) 454-1509E-mail : [email protected] : http://www.icomamerica.com






6F No. 68, Sec. 1 Cheng-Teh Road, Taipei, Taiwan, R.O.C.Phone : +886 (02) 2559 1899Fax : +886 (02) 2559 1874E-mail : [email protected] : http://www.asia-icom.com

10C07, Long Silver Mansion, No.88, Yong Ding Road, Haidian District, Beijing, 100039, ChinaPhone : +86 (010) 5889 5391/5392/5393Fax : +86 (010) 5889 5395E-mail : [email protected] : http://www.bjicom.com

Blacksole House, Altira Park, Herne Bay, Kent, CT6 6GZ, U.K.Phone : +44 (0) 1227 741741Fax : +44 (0) 1227 741742E-mail : [email protected] : http://www.icomuk.co.uk




04ES012J © 2004–2012 Icom Inc.


SPECIFICATIONSGENERAL

TRANSMITTER

RECEIVER

Measurements made in accordance with EN 300-086.

All stated specifi cations are subject to change without notice or obligation.

Applicable U.S. Military Specifi cationsIcom makes rugged products that have been tested to and passed the

following MIL-STD requirements and strict environmental standards.

StandardMIL 810F

Method ProcedureLow Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IRain Blowing/Drip 506.4 I, IIIHumidity 507.4 –Salt Fog 509.4 –Dust Blowing 510.4 IVibration 514.5 IShock 516.5 I, IVAlso meets equivalent MIL-STD-810-C, -D and -E.

SUPPLIED ACCESSORIES (May differ according to version)

• Battery pack, BP-232N/H• Unit cover• Belt clip, MB-94

• UHF Antenna

• VHF Antenna

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.


(VHF Transceiver)

(UHF Transceiver)

1m depth for 30 minutes

Photo includes optional speaker-microphone, HM-138.

IPX7 waterproof protectionThe gasket sealed waterproof housing pro-vides superior wa-terproof protection,equivalent to IPX7*.Reliable and depend-able use in harshconditions such asrain, snow, suddenchange in tempera-ture, make the IC-F50/F60 the radio forall situations.* According to the international standard IEC 529

(1989). 1m depth for 30 minutes.

Built-in Tone signalingUse the built-in CTCSS, DTCS, 2-Tone and5-Tone capability to set up your own talkgroups and quiet stand-by when others aretalking. You can also set up selective callsto individuals or control a repeater.

Multiple 2-Tone, Multiple 5-ToneUp to 10 2-Tone codes can be decoded ona single memory channel. This is perfect forprofessionals who require multiple districtpaging on one channel. When a matchedtone is received, the following items areprogrammable for each code.• Bell icon • Answer back • Stun• Beep sound • Auto transmit • Scan

Firefighters, Police, Security,own unique challenges, but amunications. Icom’s IC-F50/Feasy to use. Rain or shine, th

Superior WatSupports Dem

IC-F50 IC-F60

Li-Ion battery packThe large capacity 1950mAh (typ.) Lithium-Ion (Li-Ion) battery pack, BP-227 providesa practical 10 hours* of operating time. Li-Ion batteries allow flexible charging andhave almost no memory effect. * Typical operation Tx:Rx: Stand-by=5:5:90

Up to 7 programmable buttonsThe [P0]–[P3], [Red] and [Up], [Down] but-tons are programmable to meet specificneeds. The [Red] button on the top panelcan be assigned as an emergency trigger.

Alphanumeric displayThe 8-character alphanumeric displayshows channel, bank, tone code and scan-ning channel names on the display. 7 oper-ational icons on the sub-line show variousstatus at a glance.

Wide range coverage and largechannel capacityThe IC-F50/F60 covers a wide frequencyrange in one version. The large capacity of128 memory channels with 8 memoryzones allows you to divide and store a vari-ety of channels from local to wide area net-work channels. Both wide and narrow(25/12.5kHz) channel bandwidth is program-mable to each channel.

Compact body56(W)×97(H)×36.4(D) mm* compact bodywith durable, dependable construction, hasbeen tested to MIL standard specifications.* 27⁄32(W)×313⁄16(H)×17⁄16(D) in

Built-in voice scramblerThe IC-F50/F60 has a built-in inversiontype voice scrambler in all versions. Whena more secure system is required, versionswith a rolling type voice scrambler* equiva-lent to the UT-110 are available. * Built-in, optional unit not required.

MDC 1200 CompatibleThe following selective calling and ANI featuresare available with the built-in MDC signaling.

• PTT ID • Radio check• Caller ID • Selective call• Emergency, emergency mic monitoring• Radio stun/revive • 500 Aliases• Status/message • Call alert

Intrinsically safe versionIntrinsically safe version approved by theFMRC, is suitable for use in hazardous areaswhere flammable gasses or liquids are used.See specification page for applied classes.

Other features• Built-in audio compander • 8 DTMF auto-dial memories • BIIS 1200 mode program-mable • Normal and priority scans • 2 steppower saver • Optional AA alkaline batterycase, BP-226 for battery back up • Busy, re-peater lockout functions • Power ON pass-word, and more...

Oil industry and Public utilities. Each profession has itsall have one thing in common: the need for reliable com-F60 offers a compact waterproof, MIL STD package, that’shis radio keeps you in contact in nearly any environment.

OPTIONSBP-226AA (LR6)batteries × 5

BP-227/BP-227FMLi-Ion 7.2V1850mAh (min.)1950mAh (typ.)

BP-226 BATTERY CASE: AA (LR6)×5 alkaline cells.BP-226 is water-resistant, equivalent to IPX4.BP-227/FM Li-Ion BATTERY PACK, 7.2V, 1850mAh(min.), 1950mAh (typ.). Provides 10 hours operatingtime* (approx.). Operating temp. range: –20°C to+60°C; –4°F to +140°F. * Tx: Rx: standby=5:5:90. BP-227FM is intrinsically safe version.

BC-147 BC-152 BC-119N+AD-100

BC-121N+AD-100 (6 pcs.)

HM-168 : Compact type speaker-microphone. Equivalent to IPX7. HM-169 : Rugged type speaker-microphone. Equivalent to IP57.HM-170GP : GPS speaker-microphone for BIIS mode. Equivalent to IP57.HM-138 : Full sized speaker-microphone. Equivalent to IPX7.


CP-17L : Cigarette lighter cable for use with BC-152/BC-119N.OPC-515L : DC power cable for use with BC-152/BC-119N.OPC-656 : DC power cable for use with the BC-121N.

OPC-515L

ANTENNASFA-S24V : 136–150MHzFA-S59V : 150–174MHzFA-S27U : 400–470MHzFA-S56U : 450–520MHzFA-S74U : 490–520MHz

STUBBY ANTENNASFA-S62VS : 150–162MHzFA-S63VS : 160–174MHzFA-S57US : 450–490MHz


terproof Protection manding Communication

Upper and lower case characters available.

BATTERY CHARGER

BC-145 BC-190

RAPID CHARGER RAPID CHARGER MULTI-CHARGER

BC-145

MB-86

BC-157

OPC-966 : RS-232C interface cablefor connecting with a PC.

INTERFACECABLE

CP-17LMB-96F

BC-121N MULTI-CHARGER + AD-100CHARGER ADAPTER + BC-157 AC ADAPTERRapid charges up to 6 battery packs (Six AD-100s are required) in 2–2.5 hours.


HM-170GPHM-169

SPEAKER-MICROPHONES

HM-168 OPC-656

CIGARETTE LIGHTER CABLE AND DC POWER CABLES

BC-119N DESKTOP CHARGER+ AD-100 CHARGER ADAPTER + BC-145*1 AC ADAPTER Rapidly charges the BP-227 in 2–2.5 hrs.

BC-190 DESKTOP CHARGER + BC-145*1 AC ADAPTERRapidly charges the BP-227. Charge theradio, even when the radio power is on.

BC-152 DESKTOP CHARGER + BC-147*1 AC ADAPTERRegularly charges the BP-227 in 9–10hours. *1 BC-145/BC-147SA for 120V AC. SE for 230V AC. SV for 240V AC.


Printed in Japan













03ES018L* © 2003–2009 Icom Inc.

• Frequency range : IC-F50 136–174MHzIC-F60 400–470MHz

450–512MHz (U.S.A.)450–520MHz (General)

• Number of Channels : Max. 128 channels/ 8 zones• Channel spacing : 12.5/25kHz, 15/30kHz• Antenna impedance : 50Ω (SMA Type)

• Frequency error : ±2.5ppm• PLL channel step :

IC-F50 2.5/3.125kHzIC-F60 5/6.25kHz

• Power supply requirement : 7.2V DC • Current drain (approx) :

Transmit IC-F50 1.5A/0.7A (5W/1W)IC-F60 1.5A/0.8A (4W/1W)

Receive AF max. 300mAStand-by 85mA

• Operating temperature range : –30˚C to +60˚C; –22˚F to +140˚F • Dimensions (W × H × D) : 56 × 97 × 36.4 mm ;

(projections not included) 27⁄32 × 313⁄16 × 17⁄16 in.• Weight (approx.; With BP-227) : 280g; 9.9oz

• Output power : IC-F50 5.0WIC-F60 4.0W

• Modulation system : Variable reactance frequency modulation• Max. frequency deviation : ±5kHz (wide)

±2.5kHz (narrow)

• Modulation limiting : 60–100% of Max. deviation• Audio harmonic distortion : 3% typ. (AF 1kHz, 40% deviation)

• Spurious emissions : 70dB Min.

• Adjacent channel power : 70dB Min. (wide)60dB Min. (narrow)

• FM Hum and Noise : 46dB typ. (wide)40dB typ. (narrow)

• External MIC impedance : 9-pin multi connector/2.2kΩ

• Sensitivity : 0.25µV typ. (at 12dB SINAD)

• Squelch sensitivity : 0.25µV typ. (at threshold)

• Adjacent channel selectivity : 75dB typ. (wide)65dB typ. (narrow)

• Spurious response : 70dB• Intermodulation : 74dB typ.

• Hum and noise : 45dB typ. (wide)40dB typ. (narrow)

• Audio output power : 0.5W typ. at 5% distortion with an 8Ω load

• External SP connector : 9-pin multi connector/8Ω

SPECIFICATIONSGENERAL

TRANSMITTER

RECEIVER

Measurements made in accordance with EIA-152C/204D, TIA-603.All stated specifications are subject to change without notice or obligation.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in theUnited States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.


• Battery pack, BP-227• Alligator-type belt clip, MB-98

• Antenna (Length may differ according to version)

UHF antenna

VHF antenna

There are versions that conform to intrinsically safe rating of the FMRC(Factory Mutual Research Corporation). Ask your dealer for details.

Intrinsically safe : Class Ι, ΙΙ and ΙΙΙ, Division 1, Groups C, D, E, F, and G ; Nonincendive : Class Ι, Division 2, Groups A, B, C and D hazardous locationswhen used with Icom BP-227FM battery pack. “Max. Temp. T3C at 40°C”Approved accessories: Speaker-microphone, HM-138

INTRINSICALLY SAFE TYPE APPROVAL

Standard MIL 810FMethod Procedure

Low Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4-3 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IRain Blowing/Drip 506.4 I, IIIHumidity 507.4 –Salt Fog 509.4 –Dust Blowing 510.4 IVibration 514.5 IShock 516.5 I, IV


Applicable U.S. Military SpecificationsIcom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.


VHF transceiver UHF transceiver

Limited functions.

Simple operation forinstant communication

The IC-F3003 series is so easy to use there's

no special training required. The few knobs

and buttons are generously sized for easy op-

eration and are designed to provide non-slip,

positive action – even while wearing gloves.

Easy to hear in noisy areas

The built-in bridge-tied load (BTL) amplifi er

offers powerful 800mW* audio output from

the large 45mm speaker. The radio delivers

loud and intelligible audio even in noisy envi-

ronments. * Typical with internal speaker

Longer operating time

A new high efficiency FET of the IC-F3003

series reduces consumption current and

provides 20 hours* of operating time with

the BP-265, 2000mAh battery pack. Even

when used with the BP-264, the radio offers

14 hours* of operating time.*Tx:Rx:Standby=5:5:90. Power save function ON.

Weather resistant, dust protection, military rugged

While the radio is a compact unit with a

height of only 111mm, the radio is tested

to dust protection and water resistant

equivalent to IP54 and 11 categories of MIL-

STD-810 environmental test. In short, the

IC-F3003 series is built rugged!

Internal VOX capability for hands-free operation

The radio has the internal VOX capability for

hands-free operation. Optional compatible

headset with plug adapter cable OPC-2004

can be used with the radio. Also, the VOX

gain and VOX delay time are adjustable.

Selective calling, quiet stand-by and more

2-Tone and 5-Tone signalings give you

selective calling, quiet stand-by and other

convenient functions with programming. The

radio “stun” function disables a radio over

the air and the “revive” function restores the

stunned radio.

Scan featuresThe priority scan allows you to monitor one

or two priority channels while scanning

other non-priority channels. The Tx channel

and talk back functions allow you to make

a quick response while scanning.

Other features• DTMF autodial • CTCSS/DTCS encoder/decoder

• BIIS PTT ID transmission • MDC PTT ID and emergency

• Low battery alert • 2-step power save

• PC programmable • Time out timer

• Talk around function • Lone worker function

• Enhanced emergency • 3-color LED

• Surveillance function

Dust Protection Water Resistance

Printed in Japan

Count on us!













09HS027D © 2009–2012 Icom Inc.

SPECIFICATIONS OPTIONS

BP-264 BP-265 BP-263



All trademarks are the properties of their respective holders.


Charges the BP-265 in 2.5 hours

(approx.).

BC-191BC-192BC-147S/BC-206S*1 BC-193BC-123S*2

REGULAR CHARGER

For BP-264 (Ni-MH battery)

RAPID CHARGER


RAPID CHARGER

For BP-265 (Li-Ion battery)

BC-123S*2

*1 BC-147SA for 120V AC. SV for 240V AC. BC-206SE for 230V AC. *2 BC-123SA for 120V AC. SE for 230V AC. SV for 240V AC.

Charges the BP-264 in 16 hours

(approx.).


(approx.).

MULTI-CHARGER

For BP-264/BP-265

BC-197

BC-157S

CP-23L

For use with

BC-191 or

BC-193

OPC-515L

For use with BC-191,

BC-192 or BC-193

OPC-656

For use with

BC-197


POWER SUPPLY CABLES

HS-94

Earhook type

HS-95

Behind-the-head

type

HS-97

Throat type

HEADSETS and PLUG ADAPTER CABLE

OPC-2004

Required when using any of these headsets HM-159LA

SPEAKER-MICROPHONES

VEHICLE CHARGER

BRACKET

HM-158LA

MB-130 For use with BC-191, BC-

192, BC-193

STANDARD ANTENNAS• FA-SC25V : 136–150MHz

• FA-SC55V : 150–174MHz

• FA-SC25U : 400–430MHz

• FA-SC57U : 430–470MHz

• FA-SC72U : 470–520MHz

• FA-SC01U : 350–400MHz

CUT ANTENNAS• FA-SC61VC : 136–174MHz

• FA-SC61UC : 380–520MHz

HIGH GAIN ANTENNAS• FA-SC62V : 150–160MHz

• FA-SC63V : 155–165MHz

STUBBY ANTENNAS• FA-SC56VS : 150–162MHz

• FA-SC57VS : 160–174MHz

• FA-SC73US : 450–490MHz

CHARGER ADAPTERS• AD-120 for BP-264

• AD-121 for BP-265

Either AD-120 or AD-121 charger adapters are supplied with the BC-197, depending on BC-197's version.

BELT CLIP• MB-124 Aligator type

Same as supplied.

IC-F3003 IC-F4003

GENERAL

Frequency coverage 136–174MHz

350–400MHz

400–470MHz

450–520MHz

Number of channels 16 channels

Type of emission 16K0F3E/11K0F3E

Channel spacing 12.5/25kHz

PLL channel step 2.5/3.125kHz 5/6.25kHz

Power supply requirement 7.2V DC nominal

Current drain (approx.)

Tx High

Rx Max. audio

Standby

1.3A

330mA (Internal SP)

75mA

1.3A

330mA (Internal SP)

70mA

Antenna impedance 50ΩOperating temperature range –30°C to +55°C (Radio only)


(Projections not included)

58×111×31.0mm (With BP-264)

58×111×35.5mm (With BP-265)

Weight (approx.)330g (With BP-264)

270g (With BP-265)

TRANSMITTER

Output power (at 7.2V DC) 5W, 2W, 1W (Hi, L2, L1) 4W, 2W, 1W (Hi, L2, L1)

Max. frequency deviation ± 5.0kHz/±2.5kHz (Wide/Narrow)

Frequency stability ±2.5ppm

Spurious emissions 70dB min.

FM Hum and noise 46/40dB typ. (Wide/Narrow)

Audio harmonic distortion (AF 1kHz 40% deviation)

1.0%/1.5% typ. (Wide/Narrow)

Ext. microphone connector 3-conductor 2.5 (d) mm (1/10ʺ)/2.2kΩ)

RECEIVER

Sensitivity (at 12dB SINAD) 0.25μV typ.

Adjacent channel selectivity 78/70dB typ. (W/N) 73/65dB typ. (W/N)

Spurious response rejection 70dB min.

Intermodulation rejection 75dB typ. 74dB typ.

Hum and noise(Without CCITT filter)

54/50dB typ. (W/N) 52/47dB typ. (W/N)

Audio output power

Internal SP (With 12Ω load)

External SP (With 8Ω load)

800mW typ. (at 5% distortion)


Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8ʺ)/8ΩAll stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifi cations & IP Rating

StandardMIL 810F

Method ProcedureLow Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IRain Blowing/Drip 506.4 I, IIIHumidity 507.4 –Salt Fog 509.4 –Dust Blowing 510.4 IVibration 514.5 IShock 516.5 I, IV


Ingress Protection StandardDust & Water IP54 (Dust-protection and water resistant)

Battery packs

Type and capacity

Operating time* (Approx.)

BP-263AA (LR6)

batteries × 6–

BP-264Ni-MH, 7.2V 1400mAh

14 hours

BP-265Li-Ion, 7.4V

1900mAh (min.)

2000mAh (typ.)

20 hours

* Tx: Rx: standby = 5:5:90. Power save function ON.

18 hours operating

time with BP-232H

Limited Functions only.

Compact lightweight bodyThe rounded compact* design fi ts com-

fortably in your palm and is lightweight**

for carrying around all day. The large size

programmable buttons have ample but-

ton-pitch to allow blind touch operation.

* 53(W)×120(H)×36.9(D) mm

** 300g including BP-232H

IP54 dust-protection and splash resistance The IC-F3022 series meets IP54 require-

ments for dust-protection and splash re-

sistance. The aluminum die-cast chassis

is the basis for this rugged construction,

allowing long-life usage in various envi-

ronments.

128 memory channels andbutton control memory channelThe IC-F3022 series has 128 memory

channels with 8 zones. Memory channel se-

lection can be made easily with the up/down

buttons laid out below the PTT button.


and DTCS capabilities as standard to set

up your own talk groups and quiet stand-

by when others are talking.

Multiple 2-Tone, Multiple 5-ToneUp to ten 2-Tone and eight 5-Tone codes

can be decoded on a channel. When a

matched tone is received, the following

items are programmable for each code.

• Beep sound • Answer back • Scan

• Bell icon • Radio stun/kill

Lithium-Ion battery standardSupplied 2300mAh (typ.) Li-Ion battery

pack, BP-232H, provides 18 hours* of op-

erating time. Li-Ion batteries have virtually

no memory issues and allows you fl exible

charging. * Typical operation; Tx:Rx:Stand-

by=5:5:90, power save on

Only Icom quality can offer this

featured radio. In this compact

tive features such as multiple s

ium-Ion battery and wide freque

rugged handheld easily exceed

ble performance and communic

IC-F4022S IC-F3022T

Lone worker functionWhen the radio is not operated for a pre-

set period, the radio sounds a beep and

requires you to push any button. If the

radio is not operated for a preset time, an

emergency signal automatically transmits

and informs your co-worker that some-

thing may have happened to the individ-

ual worker.

Mode dependent scanIn the mode dependent setting, the scan-

ning setting is dependent on the operating

channel. When you change the operating

channel, the scanning list automatically

changes to the list set for that channel. It

is convenient when you move to a differ-

ent operating area and change an operat-

ing channel, you don’t have to change the

scanning setting.

MDC 1200 compatibleThe following MDC features are available

with the built-in MDC signaling.

• PTT ID (Tx/Rx) • Radio check (Rx)

• Emergency* (Tx/Rx) • Stun/revive (Rx)

• 5 alias table (Max.) (* No ACK)

Optional internal unitsThe IC-F3022 series has a 40-pin expan-

sion socket for adding an optional board.

Voice scrambler, man down and DTMF

decoder features are available, depend-

ing on the installed board.

Other features• 2 step power saver

• 8 DTMF autodial memories

• Surveillance function temporarily turns

off the LED backlight and beep sound

• Optional man down unit, UT-124R

• Normal and priority scan

• Nuisance delete function temporarily

deletes a channel from the scanning list

• TOT (Time-Out-Timer) function and lock

out penalty timer

• Low battery beep function

simple to use but versatile rich

light weight body, many attrac-

signalings, large capacity Lith-

ency coverage are standard. This

ds your expectations with relia-

cation quality. BP-230N BP-232H BP-240

BATTERY PACKS AND CASE

STUBBY ANTENNAS• FA-SC56VS: 150–162MHz, 80mm

• FA-SC57VS: 160–174MHz, 80mm

• FA-SC73US: 450–490MHz, 60mm

CUT ANTENNAS• FA-SC61VC: 136–174MHz• FA-SC61UC: 380–520MHzCut the antenna element to tune to a specifi c center frequency.

ANTENNAS• FA-SC25V: 136–150MHz• FA-SC55V: 150–174MHz• FA-SC25U: 400–430MHz• FA-SC57U: 430–470MHz


BC-171 DESKTOP CHARGER + BC-147 AC ADAPTER Charges the BP-232H in 10 hours (ap-prox.).

*1 BC-145/BC-147SA for 120V AC. SE for 230V AC. SV for 240V AC.BC-145SUK for 230V AC.

BC-160 DESKTOP CHARGER + BC-145 AC ADAPTER Charges the BP-232H in 3 hours (approx.).

BC-119N + AD-106 + BC-145 is also available. : Charges the BP-232H in 3 hours (approx.).

BC-160

RAPID CHARGER

BC-145

REGULAR CHARGER

BC-147

BC-171

HS-95

HS-97

HEADSETS and PTT/VOX UNIT

HS-94: Earhook headset with fl exible boom microphone. HS-95: Behind-the-head headset with fl exible boom microphone.HS-97: Throat microphone fits around your neck and picks up

speech vibration.VS-1L: PTT/VOX unit. Required when using these headsets with

the transceiver.

CP-23L CIGARETTE LIGHTER CABLE, OPC-515L DC POWER CABLEFor use with the BC-119N. (12–16V DC required).

MB-93



MB-96F

OPC-515L CP-23L

POWER SUPPLY CABLES

UT-109R: Up to 32 scrambling codes are available. 40-pin type.

UT-110R: Up to 1020 scrambling codes are available. 40-pin type.

UT-108R: Provides DTMF decoder capabilities. 40-pin type.

UT-124R: Automatically sends an emergency signal when the transceiver is left in a horizontal position for a preset time. 40-pin type.

INTERNAL UNITS

UT-109R VOICE

SCRAMBLER UNIT

UT-110R VOICE

SCRAMBLER UNITUT-108R

DTMF DECODERUT-124R MAN

DOWN UNIT

HM-153L: Durable earphone-microphone with revolving clip.HM-158L: Compact and durable body with screw-type connector.HM-159L: Full size durable speaker microphone.HM-166L: Light-weight earphone microphone with revolving clip.

HM-159L

SPEAKER-MICROPHONESHM-158L

HM-166L

HM-153L

Battery packs

Type Capacity Operating time* Output power

BP-230NLi-Ion, 7.4V

950mAh (min.)

980mAh (typ.)7.35 hours

5W/4W(VHF/UHF)

BP-232HLi-Ion, 7.4V

2250mAh (min.)

2300mAh (typ.)18 hours

5W/4W(VHF/UHF)

BP-240AAA (LR03) batteries × 6

– 1W

* Operating time is approximate time (at 20˚C). Tx: Rx: standby=5:5:90. Power save on.

BC-197

MULTI-CHARGER

BC-157S OPC-656

SP-27 : Acoustic tube earphone with

clothing clip.

SP-13 : Provides clear audio in noisy

environments.

EARPHONES

SP-27

BC-197 MULTI-CHARGER + BC-157S AC ADAPTERRapidly charges up to 6 battery packs. Charger adapter AD-122 is supplied

with the BC-197.

OPC-656 DC POWER CABLE :For use with the BC-197. (12–20V DC required).

BC-121N + AD-106 + BC-157S is also available.

HS-94

• Frequency range :

IC-F3022T/S 136–174MHz

IC-F4022T/S 400–470MHz

• Number of channels : 128 channels/8 zones

• Channel spacing : 12.5/20/25kHz

• Type of emission : 8K50F3E, 14K0F3E, 16K0F3E

• Antenna impedance : 50Ω

• Usable temperature range : –25˚C to +55˚C

• Power supply requirement : 7.2V DC

• Current drain (at 7.2V DC; approx.):

Transmit VHF/UHF 1.5A/1.6A (at 5W/4W)

Receive Stand-by 75mA

Rated output 250mA

• Dimensions (with BP-232H) : 53 (W) ×120 (H) ×36.9 (D) mm

(projections are not included)

• Weight (approx.) VHF : 300g (with BP-232H)

UHF 320g (with BP-232H)

• Output power VHF : 5W, 2W, 1W (Hi, Low2, Low1),

UHF 4W, 2W, 1W (Hi, Low2, Low1)

• Max. frequency deviation : ±5.0/±4.0/±2.5kHz (Wide/mid/narrow)

• Frequency stability : ±2.5ppm

• Spurious emissions : 0.25μW (≤ 1GHz)

1.0μW (> 1GHz)

• Audio harmonic distortion : 3% typ. (AF 1kHz, 40% deviation)

• Modulation limiting : 60–100% of max. deviation

• Ext. microphone connector : 3-conductor 2.5 (d) mm/2.2kΩ

• Sensitivity : –4dBμV typ. (emf; at 20dB SINAD)

• Adjacent channel VHF : 75/75/65dB typ. (Wide/mid/narrow)

selectivity UHF 75/73/66dB typ. (Wide/mid/narrow)

• Spurious response : 70dB min.

• Intermodulation : 67dB typ.

• Hum and noise ratio VHF : 60/58/55dB typ. (Wide/mid/narrow)

UHF 55/53/50dB typ. (Wide/mid/narrow)

• Audio output power : 500mW typ.

(at 5% distortion with an 8Ω load)

• External speaker connector : 2-conductor 3.5 (d) mm/8Ω











Rua Pernambuco, 353 - Sala 901 Belo Horizonte, M.G. 30130-150, BrazilPhone : +55 (31) 3582 8847Fax : +55 (31) 3582 8987E-mail : [email protected]


Printed in Japan

Your local distributor/dealer:

Count on us!www.icom.co.jp/world1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013

06WS014D* © 2006–2012 Icom Inc.


SPECIFICATIONS

GENERAL

TRANSMITTER

RECEIVER


All stated specifi cations are subject to change without notice or obligation.

SUPPLIED ACCESSORIES

• Battery pack, BP-232H• Belt clip, MB-94

• UHF Antenna

• VHF Antenna

• Option plate

(May differ according to version)


All trademarks are the properties of their respective holders.

Applicable U.S. Military Specifi cationsIcom makes rugged products that have been tested to and passed the

following MIL-STD requirements and strict environmental standards.

StandardMIL 810F

Method Procedure

Low Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IRain Blowing/Drip 506.4 I, IIIHumidity 507.4 –

Salt Fog 509.4 –

Dust Blowing 510.4 IVibration 514.5 IShock 516.5 I, IV


Limited functions.

IP67



IP67 waterproof and dust-tight protectionThe IC-F3032S series provides outstanding protection against water and dust equivalent to IP67. The IC-F3032S series can withstand 1m depth of water for 30 minutes and its dust-tight construction that prevents the ingress of powder dust, sand, mud and other objects.

Longer operating timeThe supplied waterproof Li-Ion battery pack, BP-232WP (7.4V, 2300mAh (typ.)), provides 17.5 hours* of operating time. The battery has been designed for reliability in extremely cold environments. *Tx:Rx:Standby=5:5:90. Power save function ON.

Selective calling, quiet stand-by and moreThe IC-F3032S series has built-in 2-Tone, 5-Tone, CTCSS and DTCS signaling capabilities for group communication or selective calling. When a matched 2-Tone/5-Tone is received, the following actions are programmable for each code. • Answer back calls • Beep sounds • Bell icon

• Radio stun/kill/revive • Auto TX • Scan

MDC 1200 compatibleThe following selective calling and ANI features are programmable with the built-in MDC signaling. • PTT ID • Emergency (No ACK transmission)

• Radio check (RX only) • Stun/Revive (RX only)

Emergency functionA red button on the top panel can be used as an emergency button and can be used to transmit an emergency signal. Man down (optional UT-124R required) and lone worker functions can also be used for the emergency function trigger.

Scan featuresPriority scan allows you to monitor one or two priority channels while scanning other chan-nels. The mode dependent scan automatically changes the scanning list following the operat-ing channel. The Tx channel and talk back func-tions allow you to make a quick response while scanning.

Internal option units availableThe IC-F3032S series has an internal socket for a variety of option units including voice scrambler, DTMF decoder or man down unit.

Other features• Up to 128 memory channel with 8 zones

• 8-character alphanumeric LCD


• Optional HM-168LWP, waterproof speaker-mic

• BIIS PTT ID transmission

• Low battery alert • 2-step power save

• PC programmable • Time out timer

• Talk around function • Surveillance function

Superior Waterproof Protection Combined with Versatile Functions

Printed in Japan

Count on us!













12HS002A © 2012 Icom Inc.

SPECIFICATIONS

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan)

in the United States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or

other countries. All trademarks are the properties of their respective holders.


IC-F3032S IC-F4032S

GENERAL

Frequency coverage 136–174MHz 400–470MHz

Number of channels 128 channels/8 zones

Type of emission 16K0F3E/14K0F3E/8K50F3E

Channel spacing 25/20/12.5 kHz



Tx High

Rx Max. audio/Standby

1.5A (at 5W)

250mA/75mA

1.6A (at 4W)

300mA/75mA

Antenna impedance 50ΩOperating temperature range –25°C to +55°C (Radio specifi cations)


(Projections not included)53×120×37 mm (With BP-232WP)

Weight (approx.) 310g (With BP-232WP)

TRANSMITTER


Max. frequency deviation ±5.0/±4.0/±2.5kHz (Wide/Middle/Narrow)


Spurious emissions0.25μW (≤ 1GHz),

1.0μW (> 1GHz)

Residual modulations53/51/48dB typ.

(Wide/Middle/Narrow)

55/53/50dB typ.


Audio harmonic distortion 3% typ. (AF 1kHz 40% deviation)

Ext. microphone connector 3-conductor 2.5 (d) mm (1⁄10ʺ)/2.2kΩ

RECEIVER

Sensitivity (at 20dB SINAD) –4dBμV typ. emf

Adjacent channel selectivity 75/75/65dB typ.


75/73/65dB typ.


Spurious response rejection 70dB min.

Intermodulation rejection 67dB typ.

Hum and noise

(With CCITT fi lter)

60/58/55dB typ.


55/53/50dB typ.


Audio output power 500mW typ. (at 5% distortion, 8Ω load)

Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8ʺ)/8Ω


All stated specifications are subject to change without notice or obligation.


StandardMIL 810G

Method ProcedureLow Pressure 500.5 I, IIHigh Temperature 501.5 I, IILow Temperature 502.5 I, IITemperature Shock 503.5 I-CSolar Radiation 505.5 IRain Blowing/Drip 506.5 I, IIIHumidity 507.5 IISalt Fog 509.5 –Dust Blowing 510.5 IImmersion 512.5 IVibration 514.6 IShock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standard (IC-F3032S/F4032S, BP-232WP and HM-168LWP)Dust & Water IP67 (Dust-tight and waterproof protection)

BC-160

RAPID CHARGER

BC-145S*1

REGULAR CHARGER

BC-147S*1

BC-171

INTERNAL UNITS

UT-109R

Non-rolling type

voice scrambler

UT-110R

Rolling type

voice scrambler

UT-108R

DTMF

decoder

UT-124R

Man down

unit

Battery packsand cases

Type CapacityOperating

time*

BP-232WPLi-Ion7.4V

2250mAh (min.)2300mAh (typ.)

17.5 hours(Approx.)

BP-240 LR03 (AAA) batteries × 6 –

BP-261 LR6 (AA) batteries × 6 –

* Tx: Rx: standby = 5:5:90. Power save function ON.

BP-232WP BP-261

BATTERY PACK AND CASES

BP-240

Charges the BP-232WP in 8–10 hours (approx.).

Charges the BP-232WP in 3 hours (approx.).

Charges the BP-232WP in 3 hours (approx.).

HM-159LAHM-168LWP

SPEAKER-MICROPHONES

HM-158LA HM-153LA HM-166LA

*1 BC-145/BC-147SA for 120V AC. SE for 230V AC. SV for 240V AC. BC-145SUK for 230V AC.

MULTI-CHARGER

BC-197

BC-157S CP-23L

For use with

BC-119NOPC-515L

For use with BC-119N

OPC-656

For use with

BC-197


POWER SUPPLY CABLES

AD-106

RAPID CHARGER

BC-119NBC-145S*1

STUBBY ANTENNAS• FA-SC56VS: 150–162MHz• FA-SC57VS: 160–174MHz• FA-SC73US: 450–490MHz

CUT ANTENNAS• FA-SC61VC: 136–174MHz• FA-SC61UC: 380–520MHz

HIGH GAIN ANTENNAS• FA-SC62V: 150–160MHz• FA-SC63V: 155–165MHz

ANTENNAS• FA-SC25V: 136–150MHz• FA-SC55V: 150–174MHz• FA-SC25U: 400–430MHz• FA-SC57U: 430–470MHz

BELT CLIPS

MB-93

Swivel type

MB-94

Alligator type

VEHICLE CHARGER BRACKET


MB-96F

Fixed type

MB-130

For use with BC-160.MB-96N

Swivel type

SP-13

Earphone

SP-27

Tube earphone

EARPHONES


Supplied accessories: (May differ according to version)

• Battery pack, BP-232WP • Belt clip, MB-94 • Antenna

VHF AND UHF DIGITAL/ANALOG TRANSCEIVERS


Everything you expect in a business radio ... Plus Digital!

Limited functions.

IIDAAS™™ cconnvvenntioonaal & IDAAS™ ssingle-site trunking

BBuiilt-iin 22-TToonee, 55-Toonne,, CTTCSSS and DTCS

DDiggitaal/AAnaallog miixedd mmodde oopeeration

MMDDC PPTTT IDD && MDDCC eemmerrgenncyy call

88000mW ((tyypp.) llouud aanndd inttellligiible audio

IIP554 aand MMILL-STD--8100 F rugggedd cconstruction

LLonng llasstiinng bbattteryy liffe

CChaannnel aannnouunccemmeennt

Non-slip, large PTT

The large PTT button

is designed to provide

non-slip, confi dent-click,

even wearing gloves.

Long lasting battery life

Channel announcement

When you rotate the channel knob,

the radio announces the channel

number. Convenient for making ra-

dio adjustments without having to

look at the radio.

Bright 3-Color LED

The bright LED shows the operating

status: red for transmit, green for listening,

or orange for low battery, etc.

Hands-free operation

Optional headset

with plug adapter

cable OPC-2004

provides hands-

free operation.

Built military rugged!

Okay to use in the rain! Tested to IP54

and 11 categories of MIL STD-810 F

environmental tests.

Compact and light weight

58×111.5×36.5 mm

320g with BP-265. (VHF)

800mW loud audio

The large 45mm speaker

delivers up to 800mW*

of loud audio! Digital

modulation adds dis-

tinct clarity to received

voices.

* Typical wi th internal

speaker.

IDAS™ digital mode operationThe IC-F3103D series provides basic operation

in NXDN™ CAI-based IDAS digital mode.

It is also compatible with IDAS multi-site

conventional and IDAS single-site trunking.

The following IDAS features are programmable.

• PTT ID (TX) • Individual/Group call (TX)

• Block decode • RAN (Radio Access Number)

• Radio check (RX) • Stun/kill/revive (RX)

• Call alert (RX) • Remote monitor (RX)

• Emergency (TX) • Digital voice scrambler

• GPS (TX only with HM-171GP)

TX: Transmit, RX: Receive

VHF & UHF DIGITAL/ANALOG TRANSCEIVERS

Built-in 2-Tone and 5-Tone (Analog mode)

2-Tone and 5-Tone signalings give you

selective calling, quiet stand-by and other

convenient functions. The radio stun and kill

functions disable a radio over the air and the

revive function restores the stunned radio.

Scan features

The priority scan allows you to monitor one

or two priority channels while scanning

other non-priority channels. The transmit

channel and talk back functions allow you to

make a quick response while scanning.

Other features (* = analog only)

• CTCSS/DTCS encoder/decoder*

• BIIS PTT ID transmission*

• MDC PTT ID and emergency*

• DTMF autodial • Low battery alert

• 2-step power save • PC programmable

• Time out timer • Talk around function

• Lone worker function

• Surveillance function

• Forced narrow function*

More than Just Smooth Digital Migration!

Battery

pack

Type and

capacity

Operating time*

(Approx.)

BP-264Ni-MH 7.2V1400mAh

12 hours (VHF)11 hours (UHF)

BP-265Li-Ion 7.4V

1900mAh (min.)2000mAh (typ.)

17.5 hours (VHF)16 hours (UHF)

* Tx: Rx: Standby=5:5:90. Power save function ON.

This is a simple and basic setting for those

who use the radio mainly for individual

and group call. Use the 16-position rotary

channel knob to select the appropriate

individual or group call. This setting also

can be used with analog 2-tone or 5-tone

signalling.

When using the IC-F3103D series in IDAS

multi-site conventional mode, the IC-

F3103D can communicate with other IDAS

radio users working with other repeater

sites and/or virtual radio/PC dispatch stations

on the IDAS network.

When used with the optional GPS speaker-

microphone, HM-171GP, GPS position

data can be sent to other advanced IDAS

radios (PC and software required) and/or

virtual radio/PC dispatch stations.

All advantages shown represent possible system confi gurations. Ask your Icom dealer to confi gure an IDAS system that works best for you.

*Note: Private IP Network or VPN Tunnels through the Internet with static endpoints.

The IC-F3103D series can receive both

analog and digital mode signals on a

single channel and automatically selects

the received mode to reply to the received

call, while the talk back timer remains. It’s a

smart way to grow into digital radio - at your

own pace, as your budget and comfort allow.

Mix the basic IC-F3103D series with the

advanced IC-F3163 series (with UT-126H)

for efficient group managed systems.

Commands like radio stun, kill and revive

as well as the caller ID of the IC-F3103D

displayed on the administrator’s radio provide

efficient communication within the group.

The IC-F3103D series can be used in an

IDAS single-site trunking system.

The IDAS trunking system is a distributed system

(similar to the analog LTR™ trunking) with no

control channel, so more voice traffic channels

are available for increased system capacity.

Advantage 1

Advantage 4 Advantage 5

Advantage 2 Advantage 3

Advantage 6

Individual/group call Digital/analog mixed mode Perfect group communication tool, large or small

IDAS single-site trunkingMulti-site conventional mode GPS capability

The IC-F3103D: A multitude of advantages because it’s IDAS™

IC-F3163T with UT-126

(Boss)

IC-F3103D

(Staff members)

IDAS digital modeAnalog FM mode

IP Network*

IP Network*

IC-F3103D

Analog/Digital

Analog/Digital

IC-F3103D

Analog radio

IC-F3103D

IC-F3103D IC-F3103D IC-F3103D

IC-F5063

with UT-126H

IC-F3103D

with HM-171GPRC-FS10 for virtual radio/PC dispatch

RC-FS10

Printed in Japan

Count on us!













10HS022B © 2010–2012 Icom Inc.


NXDN is a trademark of Icom Incorporated and JVC KENWOOD Corporation. IDAS and IDAS logo are trademarks of Icom Incorporated. LTR is a trademark of the EF Johnson Technologies, Inc.

All other trademarks are the properties of their respective holders.

SPECIFICATIONS

VHF & UHF DIGITAL/ANALOG TRANSCEIVERS


IC-F3103D IC-F4103D

GENERAL

Frequency coverage 136–174MHz

350–400MHz

400–470MHz

450–520MHz

Number of channels 16 channels

Type of emission 16K0F3E, 14K0F3E, 4K00F1E/F1D

Channel spacing 6.25/12.5/25kHz



Tx High

Rx Max. audio

Standby

1.3A400mA (Internal SP)

90mA (Digital mode)

1.3A400mA (Internal SP)

100mA (Digital mode)

Antenna impedance 50ΩOperating temperature range –30°C to +60°C (Radio only)


(Projections not included)58×111.5×36.5mm (With BP-265)

Weight (approx.)150g (Radio only)

320g (With MB-124, BP-265 & Ant.)

150g (Radio only)

310g (With MB-124, BP-265 & Ant.)

TRANSMITTER


Max. frequency deviation ± 5.0kHz/±2.5kHz (Wide/Narrow)


Spurious emissions 70dB min.

FM hum and noise 52/46dB typ. (Wide/Narrow) 50/43dB typ. (Wide/Narrow)

Audio harmonic distortion 1.0% typ. (AF 1kHz 40% deviation)

FSK error 5.0% max.

Ext. microphone connector 3-conductor 2.5 (d) mm (1/10ʺ)/2.2kΩ)

RECEIVER

Sensitivity (at 12dB SINAD)

(at 5% BER)

0.23μV typ.

0.18μV typ.

0.24μV typ.

0.18μV typ.

Adjacent channel selectivity 77/71dB typ. (Wide/Narrow) 74/67dB typ. (Wide/Narrow)

Spurious response rejection 91dB typ. 80dB typ.

Intermodulation rejection 75dB typ.

Hum and noise 48/42dB typ. (Wide/Narrow) 47/42dB typ. (Wide/Narrow)

Audio output power

Internal SP (With 12Ω load)

External SP (With 8Ω load)






StandardMIL 810F

Method ProcedureLow Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IRain Blowing/Drip 506.4 I, IIIHumidity 507.4 –Salt Fog 509.4 –Dust Blowing 510.4 IVibration 514.5 IShock 516.5 I, IV


Ingress Protection StandardDust & Water IP54 (Dust-protection and water resistant)

CP-23L

For use with

BC-191 or

BC-193

OPC-515L


BC-192 or BC-193

OPC-656

For use with

BC-197

STUBBY ANTENNAS60–80 mm antennas. • FA-SC56VS : 150–162MHz

• FA-SC57VS : 160–174MHz

• FA-SC73US : 450–490MHz

CUT ANTENNAS• FA-SC61VC : 136–174MHz

• FA-SC61UC : 380–520MHz

HIGH GAIN ANTENNAS• FA-SC62V : 150–160MHz

• FA-SC63V : 155–165MHz

STANDARD ANTENNAS• FA-SC25V : 136–150MHz

• FA-SC55V : 150–174MHz

• FA-SC01U : 350–400MHz

• FA-SC25U : 400–430MHz

• FA-SC57U : 430–470MHz

• FA-SC72U : 470–520MHz

CHARGER ADAPTERS• AD-120 for BP-264

• AD-121 for BP-265

Ei ther AD-120 or AD-121 charger adapters are supplied with the BC-197, depending on BC-197's version.

*1 BC-147SA for 120V AC. SV for 240V AC. BC-206SE for 230V AC. *2 BC-123SA for 120V AC. SE for 230V AC. SV for 240V AC.

Charges the BP-264 in 2 hours (approx.).

BC-192 BC-191 BC-193BC-147S/BC-206S*1

BC-123S*2 BC-123S*2

Charges the BP-265 in 2.5 hours

(approx.).

REGULAR CHARGER


RAPID CHARGERS


RAPID CHARGERS

For BP-265 (Li-Ion battery)

MULTI-CHARGER

For BP-264/BP-265

BC-197

BC-157S


POWER SUPPLY CABLES

HS-94

Earhook type

HS-95

Behind-the-head

type

HS-97

Throat type

OPC-2004

Required when

using any of

these headsets

HM-159LA

SPEAKER-MICROPHONES

HEADSETS and PLUG ADAPTER CABLE

HM-158LA

HM-171GP

GPS Microphone

TUBE EARPHONE

SP-27

BATTERY PACKS AND CASE Battery packs

Type and capacity

Operating time* (Approx.)

BP-263AA (LR6)

batteries × 6–

BP-264Ni-MH, 7.2V 1400mAh

12 hours

BP-265Li-Ion, 7.4V

1900mAh (min.)

2000mAh (typ.)

17.5 hours

* Tx: Rx: standby = 5:5:90. Power save function ON.BP-264 BP-265 BP-263


(approx.).

VEHICLE CHARGER

BRACKET

BELT CLIP

MB-130


BC-192 or BC-193

MB-124

Aligator type

Same as supplied.

(IDAS digital VHF transceiver without 10-keypad)

(IDAS digital VHF transceiver with 10-keypad)

(VHF transceiver without 10-keypad)

(VHF transceiver with 10-keypad) (UHF transceiver with 10-keypad)

(UHF transceiver without 10-keypad)

(IDAS digital UHF transceiver with 10-keypad)

(IDAS digital UHF transceiver without 10-keypad)

IDAS digital/analogue FM without 10-keypad

IDAS digital/analogue FM with 10-keypad

IDAS digital/analogue FM without 10-keypad

IDAS digital/analogue FM with 10-keypad

IP55 Dust-protection and waterjet resistanceThe IC-F3162/D series meets IP55 re-quirements for dust-protection and waterjet resistance. Its durable construction isbacked up by the aluminum die-castchassis and polycarbonate casing, allow-ing reliable operation under harshweather and environmental conditions.

Lithium-Ion battery pack The 2300mAh Li-Ion battery pack, BP-232H, provides 14 hours* of operatingtime. Icom’s rugged dual-rail guide securelylocks the battery to the radio. The optionalbattery case BP-240 provides a conve-nient back up and great reassurance in anemergency.* Typical operation Tx:Rx:Stand-by=5:5:90,

power save on

Most popular signalings built-inThe 2-Tone, 5-Tone, CTCSS, DTCS andBIIS signaling capabilities are built-in forgroup communication or selective calling.Also, the IC-F3162/D series can decodeten 2-Tone codes or eight 5-Tone codeson a channel. When a matched tone is re-ceived, the following actions are program-mable for each code.• Beep sound • Bell icon• Auto TX • Answer back call• Scan • Radio stun/kill/revive

Wide frequency range andlarge channel capacityThe IC-F3162/D series covers a wide fre-quency range in one version (VHF 136–174MHz, UHF 400–470MHz). The 512 memorychannel capacity with 128 zones allowsyou to divide and store a variety of flexiblechannel groupings. Memory channel se-lection can be made with a simple rotationof the rotary channel knob. Wide, middleand narrow channel bandwidth (25/20/12.5kHz)* is also programmable.* Programmable 25/12.5kHz or 20/12.5kHz

Voting operation (Analogue mode only)

The voting mode scanning detects thesignal strength level of repeater stationsand automatically selects the strongeststation, useful for roaming between 2 ormore repeater sites. Once you programthe voting mode to a memory zone, youcan easily start voting mode operation bychanging the zone setting.

IC-F3162DT/T IC-F4162DS/S

Full dot-matrix LCDUsing a large full dot-matrix LCD (32 × 18mm), the IC-F3162/D series shows upperand lower case characters clearly. The dis-play setting is selectable from 1 line, 12characters or 2 lines 24 characters via pro-gramming. The bottom row shows as-signed functions to the [P0] to [P3] buttons.

Enhanced audio The IC-F3162/D series employs a BTLamplifier that increases the audio outputand the built-in audio compander providesclear, low noise communications.

Built-in inversion-type voicescramblerThe built-in inversion type analogue voicescrambler* provides secure conversationas standard. When a more secure systemis required, optional voice scrambler UT-109R or UT-110R are available.* Inversion type voice scrambler is not compatible

with UT-109R/UT-110R voice scrambler.

BIIS 1200 compatibleThe following selective calling and datafeatures are available with the built-in BIISsystem.• 32 abbreviated call memories• 7 group IDs • 24-status Messages• Send 12-character SDM (Short Data Message)

• Receive up to 95 characters of free text• GPS position reporting function with

optional HM-170GP

Other features• Built-in LTR™ trunking and MDC 1200

capability* (* Depending on version)• 8 DTMF autodial memories • 2 step reduced power setting • Power on password• Busy, repeater lockout functions • Surveillance function temporarily turns

off the LED backlight and beep sound• Powerful 5W output and more...


IDAS digital mode readyIDAS (Icom Digital Advanced System) is Icom’s digitalland mobile system using the 6.25kHz narrowband FDMAtechnology. IDAS has choice of an NXDN™ protocol oran ETSI dPMR™ protocol. See the IDAS and dPMR

brochures for details.

STUBBY ANTENNAS• FA-SC56VS: 150–162MHz• FA-SC57VS: 160–174MHz• FA-SC73US: 450–490MHzCUT ANTENNAS• FA-SC61VC: 136–174MHz• FA-SC61UC: 380–520MHzHIGH GAIN ANTENNAS• FA-SC62V: 150–160MHz• FA-SC63V: 155–165MHzANTENNAS• FA-SC25V: 136–150MHz• FA-SC55V: 150–174MHz• FA-SC25U: 400–430MHz• FA-SC57U: 430–470MHz

Charges the BP-232N in 10 hours. (approx.). Charges the BP-232N in 3 hours. (approx.).

REGULAR CHARGER

BELT CLIPS

MB-93Swivel type

MB-94Alligator typeSame as supplied.

MB-94RAlligator type


MB-96F MB-96N

BC-171

RAPID CHARGER

BC-160BC-145S*1BC-147S*1

HS-95Behind-the-head type

HS-97Throat type

HEADSETS AND PTT/VOX UNIT

HS-94Earhook type

HM-170GPHM-168 HM-169

SPEAKER-MICROPHONES

HM-159SC

VS-1SCRequired when

using any of these

headsets

INTERNAL UNITS

UT-109RNon-rolling type

voice scrambler

UT-110RRolling type

voice scrambler

UT-124RMan down

unit

UT-126HNXDN CAI-based

IDAS digital unit

AD-52Required when

using any of

these earphones

SP-13Earphone

SP-27Tube earphone

BC-197*2

MULTI-CHARGER

BC-157S*2 Charger adapter AD-122 is supplied with the BC-197.

OPC-515LFor use with

BC-119N

CP-23LFor use with

BC-119N

POWER SUPPLY CABLES

OPC-656For use with

BC-197

EARPHONES

AD-106

RAPID CHARGER

BC-119N

BP-230N BP-232N BP-232H BP-240

BATTERY PACKS AND CASE Battery Type and Operating time* Output powerpacks capacity

BP-230N Li-Ion 5.5 hours 5W7.4V/ 980mAh

BP-232N Li-Ion 12 hours 5W7.4V/2000mAh

BP-232H Li-Ion 14 hours 5W7.4V/2300mAh

BP-240 AAA (LR03) – 1Wbatteries × 6* Operating time is approximate time (at 20˚C). Tx: Rx: standby=5:5:90.

Power save on.

Charges the BP-232N in 3 hours. (approx.).

BC-145S*1

*1 BC-145/BC-147SA for 120V AC. SE for 230V AC. SV for 240V AC. BC-145SUK for 230V AC.

Printed in Japan

Count on us!













08WS021C © 2008–2012 Icom Inc.


SUPPLIED ACCESSORIES

• Battery pack, BP-232N

• Belt clip, MB-94

• UHF Antenna

• VHF Antenna

(May differ according to version)

Applicable U.S. Military Specifications & IP RatingIcom makes rugged products that have been tested to and passed the following MIL-STD requirements and Ingress Protection standards.

Standard MIL 810FMethod Procedure

Low Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IRain Blowing/Drip 506.4 I, IIIHumidity 507.4 –Salt Fog 509.4 –Dust Blowing 510.4 IVibration 514.5 IShock 516.5 I, IVAlso meets equivalent MIL-STD-810-C, -D and -E.

Ingress Protection StandardDust & Water IP55 (Dust-protection and water jet resistance)

SPECIFICATIONS VERSION COMPARISONIC-F3162DT/DS IC-F4162DT/DS

IC-F3162T/S IC-F4162T/S

GENERALFrequency coverage 136–174MHz 400–470MHzNumber of channels 512 channels/128 zonesChannel spacing 25/20/12.5kHz

6.25kHz (Digital version)Type of emission 16K0F3E, 14K0F3E, 8K50F3E,

4K00F1E/F1D (Digital version)Frequency stability ±1.0ppmAntenna impedance 50ΩOperating temperature range –25˚C to +55˚CPower supply voltage 7.2V DC nominalCurrent drain (at 7.2V DC)

TX 5W 1.5A 1.8ARX Stand-by 100mA 100mA

Digital 150mA 140mARated output 600mA 600mA

Dimensions (W×H×D) 53×136×38.5 mm (with BP-232N)(Projections not included)Weight (approx.) 340g (with BP-232N)

TRANSMITTEROutput power 5W, 2W, 1W (Hi, L2, L1)Max. frequency deviation ±5.0kHz/±4.0kHz/±2.5kHz (W/M/N)Spurious emissions 0.25µW (≤1GHz)

1.0µW (>1GHz)Audio harmonic distortion 3% typ. (AF 1kHz, 40% deviation)FSK error (Digital) 5% Max. Modulation limiting 60–100% of max. deviationExt. microphone connector 9-pin multi connector/2.2kΩRECEIVERSensitivity 20dB SINAD –4dBµV typ. (emf)

5% BER –8dBµV typ. (emf)Adjacent channel selectivity 75/75/68dB typ. (W/M/N)Spurious response 70dB min.Intermodulation rejection 67dB typ.Hum and noise ratio 55/53/50dB typ. (W/M/N)Audio output power 500mW typ. at 5% distortion with an 8Ω loadExt. speaker connector 9-pin multi connector/8ΩMeasurements made in accordance with EN 300-086. All stated specifications are subject to change without notice or obligation.

IC-F3162DT/DS IC-F3162DT/DS IC-F3162T/SIC-F4162DT/DS IC-F4162DT/DS IC-F4162T/S

(IDAS dPMR (IDAS NXDN (FM version)version) version)

CTCSS/DTCS (Analogue)

5-Tone enc/dec (Analogue)

2-Tone enc/dec (Analogue)

DTMF autodial (Analogue)

DTMF decoder (Analogue)

BIIS 1200 (Analogue)

MDC 1200 (Analogue) –

LTR trunking (Analogue) –

Voice scrambler (Analogue)Inversion

Non-Rolling UT-109R UT-109R UT-109RRolling UT-110R UT-110R UT-110R

Man Down Function UT-124R UT-124R UT-124R

IDAS dPMRMode 1/2 – –Mode 3 Planned – –

IDAS NXDN Conventional mode – * UT-126HSingle-site type D trunking – * UT-126HMulti-site type D trunking – * UT-126H

* UT-126H is already installed in the IDAS NXDN version.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or othercountries. IDAS, IDAS logo are trademarks of Icom Incorporated. NXDN is a trademark of Icom Incorporated and JVC KENWOOD Corporation. dPMR and the dPMR logo are trademarksof the dPMR MoU Association. LTR is a trademark of E.F. Johnson Company. All other trademarks are the properties of their respective holders.

The IC-F5022 series is ideal for small-to-mid sized sys-

tems for public safety, large industry to light commercial

users.

The IC-F5022 series offers multiple signaling, ad-

vanced scanning, improved external channel control

capability and wide frequency coverage packed in a

compact body. This rugged mobile easily exceeds your

expectations with its reliable performance and commu-

nication quality.

Features, Performance, Value For the Everyday PMR User

25W

25W

Optional internal unitsThe IC-F5022 series has a 40-pin option

slot for adding an optional internal unit.

Optional voice scrambler units, UT-109R

or UT-110R provide secure private con-

versation. Optional DTMF decoder unit,

UT-108R offers DTMF decode capability.

External memory channel control with optional ACC cableWith the optional OPC-1939 D-SUB 15-

pin ACC cable, the IC-F5022 series can

be programmed to control an operating

channel from an external device (up to 16

preprogrammed channels). The ACC con-

nector also provides an ignition sensing

function, external PTT, PC command,

horn honk, audio output and modulated

signal input depending on programming.

Other features• BIIS 1200 PTT ID transmission

• Microphone hanger action programmable

• Wide, middle and narrow channel spac-

ing (25, 20, 12.5kHz) programmable

• Optional DTMF microphone (HM-152T)

• Time-out-timer, lock-out penalty timer

and more


• Power-on password function

• Nuisance delete function

128 memory channels 128 channels (Max.) separated into 8

memory zones. Memory channels can

be identifi ed with the 8-character chan-

nel name and selected easily with the up/

down buttons.

Front mounted speaker4 watts (typ.) front mounted speaker deliv-

ers clear and loud audio. With the speaker

facing the operator, audio can be clearly

heard without impediment during opera-

tion.

6 programmable buttonsA pair of up/down and P0–P3 function

assignable buttons allow you to custom-

ize functions to meet specifi c needs. An

independent volume knob offers simple,

convenient operation.

MIL grade rugged constructionThe tough aluminum die-cast chassis

and polycarbonate front panel have been

tested to the MIL standard 810F. With this

heavy-duty construction, the IC-F5022

series provides reliable operation over the

long term in all manners of rugged envi-

ronments.


and DTCS capabilities as standard to

set up your own talk groups, PTT ID and

quiet stand-by when others are talking.

The IC-F5022 series has added CTCSS/

DTCS high speed decode.

MDC 1200 compatibleThe following MDC features are available

with the built-in MDC signaling.

• PTT ID (TX/RX) • Radio check (RX)

• Radio stun (RX) • Radio revive (RX)

• Emergency TX/RX (No ACK)

• 5 alias table (Max.)

Multiple 2-Tone, Multiple 5-ToneUp to ten 2-Tone and eight 5-Tone codes

can be decoded on a channel. When a

matched tone is received, the following

items are programmable for each code.

• Beep sound • Answer back • Scan

• Bell icon • Radio stun/kill/revive

Radio kill, stun and reviveThe radio kill/stun functions disable a lost

or stolen radio over the air, eliminating

security threats from undesired listeners.

When the stun command is received, all

functions will be temporary locked out

until the revive command is received or

the unlock password is entered.

Lone worker functionWhen the radio is not operated for a pre-

set period, the radio sounds a beep and

requires you to push any button. If the

radio is still not operated for a specifi ed

wait period, an emergency signal auto-

matically transmits and informs co-work-

ers that something may have happened

to the individual worker.

Mode dependent scan In the mode dependent setting, the scan-

ning setting is dependent on the operating

channel. When you change the operating

channel, the scanning list automatically

changes to the list set for that channel. It

is convenient when you move to a differ-

ent operating area and change operating

channel, you don’t have to change the

scanning setting.

Tx channel setting and Talk back function The Tx channel setting allows you to pro-

gram a transmission channel while scan-

ning. Start channel, last detected channel,

priority and preprogrammed channel are

selectable. Prior to the Tx channel setting,

the talk back function allows you to talk on

the last detected channel, while scanning

resumes after a preset time. The user can

easily make a quick response with this

function.

Wide frequency coverageThe IC-F5022 series covers a wide fre-

quency range in one version (VHF 136–

174, UHF 400–470MHz).

The IC-F5022/F6022 series is designed

to be a companion to our IC-F3022/F4022

series handheld transceiver. The number

of channels and banks, signaling for-

mats, programming software and voice

scrambler are compatible. Take advan-

tage of the shared functionality to com-

plete your communications requirements.

Compatible with IC-F3022/F4022 series handheld

Photo includes optional OPC-1939


Printed in Japan

Count on us!













09ES010D © 2009–2012 Icom Inc.


OPTIONS

INTERNAL UNITS


EXTERNAL SPEAKERSDESKTOP MICROPHONE

SP-10SP-5

ACC CABLES

HAND MICROPHONES

SPECIFICATIONS

UT-108R

DTMF DECODER

SP-35: 2m cable

SP-35L: 6m cable

UT-109R VOICE SCRAMBLER UNITNon-rolling type

UT-110R VOICE

SCRAMBLER UNIT

Rolling type

Supplied Accessories • Hand microphone (HM-152) • DC power cable • Mounting bracket kit • Microphone hanger • Key assign stickers

OPC-207825-pin type

OPC-193915-pin type

Applicable U.S. Military Specifi cations

StandardMIL 810F

Method ProcedureLow Pressure 500.4 I, IIHigh Temperature 501.4 I, IILow Temperature 502.4 I, IITemperature Shock 503.4 ISolar Radiation 505.4 IHumidity 507.4 –Settling Dust 510.4 IIIVibration 514.5 IShock 516.5 I, IV


HM-148THeavy duty microphonewith DTMF keypad

HM-152TDTMF microphoneHM-152 SM-26

HM-148GHeavy duty microphone

IC-F5022 IC-F6022

GENERALFrequency coverage 136–174MHz 400–470MHz

Number of channels Max. 128 Ch/ 8 zonesType of emission 16K0F3E, 14K0F3E, 8K50F3E

Channel spacing 25/20/12.5kHz

Power supply requirement 13.2V DC


Tx 25W

Rx Max. audio

Standby

5A

700mA

250mA

Antenna impedance 50Ω (SO-239)

Operating temperature range –25°C to +55°C


(Projections not included)150×40×117.5mm

Weight (approx.) 0.8kg

TRANSMITTEROutput power (at 13.2V DC) 25W, 10W, 2.5W (Hi, L2, L1)

Max. frequency deviation ±5.0kHz/±4.0kHz/±2.5kHz (W/M/N)

Frequency stability ±1.5kHz

Spurious emissions0.25μW (≤1GHz)

1.0μW (>1GHz)

Residual modulation 55/53/50dB typ. (W/M/N)

Audio harmonic distortion 3% typ. (AF 1KHz, 40% deviation)

Modulation limiting 70–100% of Max. deviation

Ext. microphone impedance 600Ω (8-pin modular)



IC-F5022 IC-F6022

RECEIVERSensitivity (at 20dB SINAD) –4dBμV typ. emf

Adjacent channel selectivity 75/75/65dB typ. (W/M/N)

Spurious response 80dB typ.

Intermodulation 67dB typ.

Hum and noise 55/53/50dB typ. (W/M/N)

Audio output power 4W typ. (at 5% distortion, 4Ω load)



19-inch rack mount, 2U heightlow profile designThe IC-FR5000 series uses only 2U height.This low profile configuration allows you tostack multiple units in an industry standard19-inch rack and provides great space effi-ciency.

Two RF modules in one unitThe IC-FR5000 series has an internalspace for installing another RF unit. TwoRF modules* can be installed and can beprogrammed and operated independently.LEDs on the front panel show both channelconditions. * Optional UR-FR5000/UR-FR6000 required.

50W output at 50% duty cycle,25W 100% duty cycle operationEmploying a high stability ±0.5ppm oscilla-tor and high performance power amplifier,the IC-FR5000 series provides a reliable100% duty cycle operation at 25W output.When operated at the high power setting of50W, the repeater operates with a 50%duty cycle.

32 channel capacity and 5 programmable buttonsThe 12-digit dot-matrix display, 5 program-mable buttons, 32 memory channels andinternal speaker allow you to use the re-peater as a simple base station or to checkrepeater activity.

Multiple CTCSS, DTCS tone andRAN code decodeThe IC-FR5000 series decodes multipleCTCSS and DTCS as well as digital RAN(Radio Access Number) codes on a per chan-nel basis (up to 16 tones/codes) and downlinksthe received signal with a specified tone/code. This function is useful for sharing achannel with multiple groups and providesquiet stand-by while using other groups.

D-SUB 25-pin accessory connectorThe IC-FR5000 series has a programma-ble D-SUB 25-pin accessory connector forconnecting various trunking controllers orexternal remote control devices. Also, mod-ulation/demodulation signals can be input/output from the D-SUB connector.

Two RF units can be installed inside. (Left side is an option.)

Value, Performance and F

Superior receiver performanceThe IC-FR5000 series has class leadingreceiver performance of selectivity and in-termodulation rejection. It improves thequality of the repeater service even undercongested band conditions.

Voice scramblerThe built-in inversion type* voice scramblerprovides secure conversation as standard.When a more secure system is required,the 32 code non-rolling type voice scram-bler UT-109R* and 1020 code rolling typeUT-110R* are available as an option. InIDAS digital mode, a 15-bit encryption keyprovides over 32,000 scrambling codes.* These voice scramblers (inversion type, UT-109R

and UT-110R) are available with analog mode only.

Built-in audio compander*

The built-in audio compander improves thesignal to noise ratio and provide clearaudio. * Analog mode only.

Other features• PTT priority setting (Local Mic., external PTT

or repeater operation)• 5-Tone and DTMF encoder/decoder* • CW ID transmitter • Analog wide/narrow (12.5/25kHz) channel

spacing programmable*• Wide frequency range: VHF 136–174MHz,

UHF: 400–470 or 450–520MHz• Normal and priority scan • Convenient key assign stickers supplied• Quick and easy programming from a PC• Beat cancel capability• Low voltage alert* * For analog mode only

Group A

Group B

Group C

Channel=Ch1DTCS=023NChannel=Ch1DTCS=023N

Repeater

Channel=Ch1CTCSS=88.5HzChannel=Ch1CTCSS=88.5Hz

Example shows;3 groups are sharing1 channel with different tone/code settings.

Multiple-table

Channel=Ch1CTCSS=123HzChannel=Ch1CTCSS=123Hz

d Flexibility: All Standard

6.25kHz IDAS digital

6.25kHz digital trunking

25/12.5kHz Analog

VPN

Conventional wide area IP network isavailable later

The IC-FR5000 series can receive both analog and digital mode signals on a single channel. You can partially introduce IDAS digital radios, while still maintaining the existing analog radios in the system.

The IDAS system utilizes 6.25kHz narrow channel spacing, which within a 12.5kHz channel, you can create two offset channels. (i.e. doubling the channel efficiency and capacity)

Being digital, integration and convergence with IP technology as well as multiple data applications will be possible to enhance the basic system.

Enjoy noise free audio over a greater comparable area than analog FM. The IDAS radio uses the AMBE+2™ codec the latest evolution in vocoding technology.

The optional UC-FR5000 offers single site digital trunking capability for effective channel management. Its distributed system (similar to the analog LTR™ trunking) does not require a dedicated control channel. Up to 30 channels (RF units) per site can be set up.

The above is a system image only. Actual release timing and system capabilities are still to be decided.

The IC-FR5000 series is ready for IDAS digital and IDAS trunking.

Flexible migration path from analog to digital

Double your channel capacity

Flexible application possibilities

Improved audio quality and coverage

IDAS trunking with optional UC-FR5000

Repeater Repeater

Analog Radio

Dispatch console*

VPN

VPN

NetworkInterface*

NetworkInterface*

Remote setting

Digital Radio

Digital Radio

Digital Trunking

Digital Radio

GPSMicrophone

Digital Radio

Trunking Repeater

Ch3

Ch2

Ch1

Ch30

IC-FR5000/FR6000

UC-FR5000

BUS

Ch1

Ch1

Ch1 Ch1 Ch30 Ch30

Ch30 1 unitrequiredper channel


Printed in Japan












VHF AND UHF REPEATERS

08YD0080* © 2008 Icom Inc.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. AMBE+2 is a trademark and property of Digital Voice Systems Inc. All other trademarks are the properties of their respective holders.

OPTIONS• HM-152 HAND MICROPHONE

Regular hand microphone.

• SM-25 DESKTOP MICROPHONEEquipped with a monitor switch.

• SP-22 EXTERNAL SPEAKERCompact and easy-to-install.

• UT-109R VOICE SCRAMBLER UNIT* Provides operating security. Up to 32non-rolling scrambling codes areavailable. (Analog mode only)

• UT-110R VOICE SCRAMBLER UNIT*Up to 1020 rolling scrambling codesare available. (Analog mode only)

* UT-109R/UT-110R voice scramblers are notcompatible with Inversion type voice scrambler.

• UR-FR5000 VHF CHANNEL MODULE136–174MHz, 50W

• UR-FR6000 UHF CHANNEL MODULE400–470MHz, 450–520MHz, 50W

• UC-FR5000 IDAS TRUNKING BOARDProvides IDAS digital trunking capabil-ity. The IDAS trunking system canhave up to 30 channels per site. OneUC-FR5000 is required per channel.Most of the UC-FR5000 settings canbe configured from a web browser.

SP-22SM-25HM-152 UT-109R UT-110R UR-FR5000UR-FR6000

UC-FR5000

TX AntennaConnector

RX AntennaConnector

Installation space for optional channel module.

D-SUB 25-PinAccessory Connector

External SpeakerConnector

To DC PowerReceptacle

REAR VIEW

SPECIFICATIONS

• Frequency coverage : IC-FR5000 136–174MHz,IC-FR6000 400–470, 450–520MHz

• Number of channels : Max. 32 channels• Channel spacing : 6.25/12.5/25kHz

7.5/15.0/30kHz• PLL channel step : 2.5, 3.125kHz • Frequency stability : ±0.5ppm• Operating temperature : –30˚C to +60˚C

range ; –22˚F to +140˚F• Power supply voltage : 13.6V DC• Current drain (at 13.6V DC) :

TX 50W 15ARX Max. audio 1.9A

Stand-by 500mA400mA (FAN, LCD backlight off)

• Antenna impedance : 50Ω (Type-N × 2)• Dimensions (W×H×D) : 483×88×260 mm

; 191⁄32×315⁄32×101⁄4 in• Weight : 5.6kg ; 12.3lb (approx.)

• Output power : 50W (adjustable to 5W) 25W at 100% duty cycle

• Max. frequency deviation : ±5.0/2.5kHz (wide/narrow)• Spurious emissions : 80dB typ.• Adjacent channel power : 73/67dB typ. (wide/narrow)• FM hum and noise : 50/45dB typ. (wide/narrow)• Audio harmonic distortion : 1% typ. (40% deviation)• Microphone impedance : 600Ω (8-pin modular)

• Sensitivity FM (W/N) : 0.30μV typ. (at 12dB SINAD)Digital 0.25μV typ. (at 5% BER)

• Spurious response : 90dB typ.• Intermodulation rejection : 78dB typ.• Hum and noise ratio : 50/45dB typ. (wide/narrow)• Audio output power : 4.0W typ. at 5% distortion with

a 4Ω load• External speaker connector : 2-conductor 3.5 (d) mm

(1⁄8″)/4Ω

GENERAL

Measurements made in accordance with TIA-603 (for AnalogFM). All stated specifications are subject to change withoutnotice or obligation.

TRANSMITTER RECEIVER


High Temperature 501.4 I, IILow Temperature 502.4 I, IIDust 510.4 IVibration 514.5 IShock 516.5 I


Applicable U.S. Military SpecificationsIcom makes rugged products that have been tested to and passed thefollowing MIL-STD requirements and strict environmental standards.

Supplied Accessories• DC power cable • Handle kits• Key assign stickers

Offers an integrated system

IC-F3161D seriesIC-F5061D series

Take advantage of Icom’s integrated system design fora total digital system. The IC-F3161D and IC-F5061Dseries are designed for the IDAS compatible terminalcomponents with the following digital features.• IDAS conventional • IDAS trunking• Selective call, group call and talk group ID• Status call/request • Radio check• Radio stun/kill/revive • Data call• Digital voice scrambler • Emergency call• Call alert • Call log

Compact, easy to use and a great value

Compact, easy to use and a great value

MA-500TR AIS Transponder compatible

Count on us!

Printed in Japan












10ES0130 © 2010 Icom Inc.


• Frequency range : Tx 156.025–157.425MHzRx 156.050–163.275MHzCh.70 156.525MHz

• Usable channel : USA, CAN, INT, WX groups channels

• Type of emission : 16K0G3E, 16K0G2B

• Power supply : 13.8V DC ±15%

• Current drain : Tx 5.5A (at 25W output)

(at 13.8V DC) Rx 1.5A (at AF max.)

• Operating temperature range : –20°C to +60°C; –4°F to +140°F

• Antenna impedance : 50Ω (SO-239)

• Dimensions (W×H×D, projections not included) : 164×78×139.5mm ; 615⁄32×31⁄16×51⁄2 in.

• Weight (approx.) : 1060g; 2.3lb

• NMEA formats : Input RMC, GGA, GNS, GLL Output DSC, DSE

• Output power : 25W/1W (Hi/Low)

• Max. freq. deviation : ±5.0kHz

• Frequency tolerance : ±10ppm

• Spurious emissions : Less than –70dBc (at 25W)

• Adj. channel power : More than 70dB

• Audio harmonic : Less than 10% (at 60% dev.)

distortion

• Residual modulation : More than 40dB

• Sensitivity : 0.22μV typical at 12dB SINAD

• Squelch sensitivity : Less than 0.4μV

• Adj. Ch. selectivity : More than 70dB

• Spurious response : More than 70dB

• Intermodulation : More than 70dB

• Hum and noise : More than 40dB

• Audio output power : 4.5W typical at 10% distortion with a 4Ω load

GENERAL TRANSMITTER

RECEIVER

Measurements made in accordance with TIA/EIA 603. All stated

specifications are subject to change without notice or obligation.


AquaQuake and Force5Audio are trademarks of Icom Incorporated. All other products or brands are registered trademarks or trademarks of their respective holders.

SPECIFICATIONS

FEATURES

Color versions:• Black • Super white

Supplied accessories:• Hand microphone • DC power cable

• Mounting bracket kit

Class D Digital selective calling The built-in Class D DSC provides ad-

ditional safety at sea. The built-in DSC

watch function monitors Ch 70 (DSC chan-

nel) activity, even while you are receiving

another channel. Distress, individual, group,

all ships, position request/reply, polling re-

quest/reply and DSC test calls can be sent.

DSC messages can be received and auto-

matically stored in the message memory.

IPX7 submersible protectionThe IC-M412 can withstand submersion

in 1m of water for up to 30 minutes (except

cables). The supplied microphone also has

submersible protection.

Easy to see large displayThe large backlit LCD (23.5(H)×64(W)mm; 15⁄16×

217⁄32 in) shows a full sized channel number.

A 10 character scrolling message shows

the channel name and can show position,

time and DSC messages.

Common GPS/NAV interfaceWhen connected to an external GPS re-

ceiver, current position and time are shown

on the IC-M412's display. When receiving

position information from another vessel,

the IC-M412 can transfer it to a navigational

device via NMEA 0183 connectivity.

Superior receiver sensitivity,Superior speaker audioThe IC-M412 has 0.22μV (typical at 12dB

SINAD) superior sensitivity for class-leading

receiver performance. The front facing speaker

offers 4.5W (typical) of loud, clear reception.

And more• AquaQuake™ draining function blows

water away from the speaker grill

• Priority and normal scan using simple tag

scanning system

• External speaker connection

• Low voltage indicator

• Transmitting power selection with microphone

• HM-164B/SW HAND MICROPHONE

Black or super white are available.

Same as supplied.

• MB-69 FLUSH MOUNT KIT

For flush-mount-

ing the IC-M412 to

a flat surface such

as an instrument

control panel.

OPTIONS

MB-69

External SP

NMEA IN NMEA OUT

DC power

connector

Antenna connector

REAR PANEL VIEW

148 (513/16)

139.5

(5

1/2

)78 (

31/1

6)

164 (615/32) 28.3

(11/8)

14.2

(9/16)111.2

(43/8)

60.6

(2

3/8

)

Unit: mm (inch)

DIMENSIONS

HF MARINE TRANSCEIVER

Standard 4 ×× 8 remote controllerThe IC-M802 offers an industry-standard 4-inch tall (10.16cm) remote controller. When set up with the IC-M502 VHFradio, Icom offers you a complete communications station.

Large LCD with dot matrix charactersYou can easily read the alphanumeric name of any of the1355 ITU channels at a glance with the large LCD dis-play. Nighttime operation is no problem with 10 levels(plus OFF) adjustable backlit display and keypad.

Easy to use in all conditionsThe IC-M802 offers two large dials – bank and channel– for easy channel selection. Up to 16 banks of 20(max.) each for user channels, and 17 banks for ITUchannels are available.

Built-in digital selective callingFor added safety at sea, the IC-M802 offers thelatest in one-touch DSC emergency communica-tions technology. (ITU Class E standard.) The emer-gency button is covered by a red, spring loadedhatch to avoid accidental DSC activation.

Digital signal processor advantageThe speech compressor, utilizing DSP, increasesaverage talk power. Flexible filter settings providefor narrow band signals like e-mail, SITOR, FSKand other operation without an optional filter.

150W (PEP) of powerful output 150 Watts of power offers superior worldwidecommunications. A one piece, die cast alu-minum chassis and a large cooling fan allow

continuous transmission at full output power –very important for data communications, like e-mail.

One-touch e-mail accessAn SSB first! The IC-M802 can be set to memorize your

HF e-mail access frequency, mode and bandwidth settings.At sea e-mail has never been easier. * Please consult with an HF e-mail provider for details.

Automatic antenna tuner, AT-140An optional automatic antenna tuner, AT-140, easily con-nects to the IC-M802. When the tuner cannot tune the an-tenna, the IC-M802 bypasses the tuner and displays awarning indicator on the LCD.

Other features• Wide band receive coverage (0.5 – 29.9999MHz)• Remote control mic allows you to select channels directly• Accessory RS-232C port allows connection of modem, etc.• GPS input, NMEA 0183 version 3.01• A headphone jack in front of the controller

The latest ICOM Digital Signal Processor technology with a compact remote head

The latest ICOM Digital Signal Processortechnology with a compact remote head

HF MARINE TRANSCEIVER

• Frequency coverage (Unit : MHz): Rx 0.5–29.9999 (continuous)Tx 1.6– 2.9999, 4.0– 4.9999, 6.0– 6.9999

8.0– 8.9999, 12.0–13.9999, 16.0–17.999918.0–19.9999, 22.0–22.9999, 25.0–27.5000

• Type of emission : J3E (SSB), J2B (AFSK), F1B(FSK), A1A (CW), H3E (AM*) (*Rx only)

• Number of channels : 1355 (max.)(160 programmable channels; 249 ITU SSB duplex; 72 ITUSSB simplex; 662 ITU FSK duplex; 160 e-mail; 21 ITU4MHz simplex; 31 ITU 8MHz simplex)

• Antenna impedance : 50Ω (SO-239)

• Power supply requirement : 13.6V DC ±15%

• Max. current drain (at 13.6V DC):Tx (Max. power) 30A (typ.)Rx (Max. audio) 3.0A

• Operating temp. range : –30°C to +60°C; –22°F to +140°FGuaranteed range : –20°C to +55°C; –4°F to +131°F

• Frequency stability : ±10Hz (at –20°C to +55°C)

• Dimensions (W×H×D; projections not included):Main unit 240×94×238.4mm; 97⁄16×311⁄16×93⁄8 inController 220×110×84.4mm; 821⁄32×411⁄32×35⁄16 inSpeaker 110×110×84.4mm; 411⁄32×411⁄32×35⁄16 in

• Weight : Main unit 4.7kg; 10.36lb Controller 570g; 1.26lb Speaker 370g; 0.81lb

• Output power : 150, 60, 20W PEP (Selectable)

• Spurious emissions : –62dB• Unwanted sideband : 55dB• Carrier suppression : 40dB• Microphone impedance : 2.4kΩ

• Sensitivity (at 10dB S/N) :

• Spurious response rejection ratio:Tx/Rx (1.6–29.9999MHz) More than 70dB DSC (Except 1st IF image) More than 50dB

(1st IF image) More than 60dB • Audio output power : 4.0W at 10% distortion

(at 13.6V DC) with a 4Ω load

• Audio output impedance: 4–8Ω• Clarity variable range : ±150Hz• GPS interface : NMEA 0183 version 3.01

GENERAL

TRANSMITTER

RECEIVER

SPECIFICATIONS

All stated specifications are subject to change withoutnotice or obligation.

approx. 24.5 m; 80.3 ft

OPTIONS SYSTEM OVERVIEW

AH-710 FOLDED DIPOLEANTENNA

Matches the transceiver to a long wireantenna with little insertion loss. Cableconnections are easy to install.AT-130 is also available.

Covers 1.9 to 30MHz band. Has an SO-239connector and 30m (98.4ft) coaxial cable.Easy to assemble (non-kink construction).

Water resistant, remote function mic. Same as supplied.

Match the transceiver to a longwire an-tenna. Covers all HF bands from 1.5 to30MHz. A 15m (49.2ft) antenna wirecomes attached.

• RC-25 REMOTE CONTROLLERRemote controller head. Same as supplied.

• OPC-1106 SEPARATION CABLE5m (16.4ft) separation cable between con-troller and main unit. Same as supplied.

For mounting the controller or speakerto a panel.

4×4-inch external speaker. Same as sup-plied. Input impedance: 4Ω. Max. inputpower: 7W.

SP-24 EXTERNAL SPEAKER

AT-140HF AUTOMATICANTENNATUNER

MN-100 ANTENNA MATCHER MN-100L ANTENNA MATCHER

MB-75 FLUSH MOUNT KIT

0.5 – 1.5999MHz1.6 – 1.7999MHz1.8 – 3.9999MHz4.0 –29.9999MHz

J3E, A1A6.3μV0.89μV

0.5μV

J2B, F1B–

0.89μV

0.5μV

H3E32μV6.3μV3.2μV

–

DSC (J2B)

0.5μV(at 1%

error rate)

Supplied accessories: Separation cable, OPC-1106 (5m; 16.4ft) Hand microphone, HM-135 External speaker, SP-24 Mounting bracket kits Microphone hanger DC power cables ACC plugs Spare fuses

GPS receiver

RC-25SP-24

HF e-mailor PC remote control

To ACC connector orAF/MOD connector

PC control withNMEA format

HM-135HAND MICROPHONE

Match the transceiver to a dipole an-tenna. Covers all HF bands from 1.5 to30MHz. Two 8m (26.2ft) antenna wirescome attached.

OPC-1147/NSHIELDED CONTROLCABLE

10m (32.8ft) shielded control cable con-nects between AT-140 and transceiver.OPC-1147N is for use with AT-140 Version 36.



Printed in Japan


Communication EquipmentHimmelgeister Str. 100, D-40225 Düsseldorf, GermanyPhone : +49 (0211) 346047Fax : +49 (0211) 333639E-mail : [email protected] : http://www.icomeurope.com

Unit 1 / 103 Garden Road,Clayton VIC 3168 AustraliaPhone : +61 (03) 9549 7500Fax : +61 (03) 9549 7505 E-mail : [email protected] : http://www.icom.net.au








02YS007J © 2002–2006 Icom Inc.


Count on us!

Printed in Japan












SPECIFICATIONS

11ES0010 © 2011 Icom Inc.

• Frequency range : TX 156.025–157.425MHz RX 156.050–163.275MHz

• Usable channel groups : INT, USA, CAN, WX channels

• Type of emission : 16K0G3E (FM)

• Current drain (at 3.7V DC) : Tx High 2.3A Rx AF max. 350mA typ.

Power save 8mA typ.

• Operating temp. range : –20°C to +60°C; –4°F to +140°F

• Antenna impedance : 50Ω (Stud)

• Dimensions (W×H×D) : 58.5×128.5×34.5 mm;

(projections not included) 2.3×5.06×1.36 in

• Weight (approx.) : 260g; 9.2oz (With BP-266,

FA-SC58V, MB-124)

• Output power (Hi/Low) : 5W/1W approx.• Max. frequency deviation : ±5kHz• Frequency stability : ±10ppm• Spurious emissions : –68dBc typ.

• Adjacent channel power : 70dB• Audio harmonic distortion : Less than 10% (at 60% dev.)

• Residual modulation : 40dB

• Sensitivity (at 12dB SINAD) : 0.25µV typ.

• Squelch sensitivity : 0.35µV typ. (at threshold)

• Adjacent channel selectivity : 70dB typ.

• Spurious response : 70dB typ.

• Intermodulation rejection : 70dB typ.

• Hum and noise ratio : 40dB• Audio output power : 600mW typ.

( at 10% distortion, 8Ω load)

Measurements made in accordance with TIA/EIA-603. All stated

specifications are subject to change without notice or obligation.

GENERAL TRANSMITTER

RECEIVER

MB-124 FA-SC58VBC-199S* Charges BP-266 in 8.5 hours (approx.).


Float’n fl ash*With its innovative flashing red LED light, an

overboard IC-M24 is easy to find, day or night.

The light flashes even if the radio is turned off.

* US patent pending.

Smallest and lightest in the worldAs a 5W VHF marine transceiver, the IC-M24

has the smallest and lightest body in the world.*

* As of December, 2010, researched by Icom.

Energy-saving 3.7V circuitryThe IC-M24 is powered by the 3.7V Lithium-Ion

battery pack, BP-266, to reduce the volume and

weight of the radio. A newly developed PA circuit

provides 5W (approx.) RF output and powerful

600mW (typ.) audio even at this low voltage,

while saving battery consumption for 10 hours of

operating time.*

* Typical operation with Tx (Hi): Rx: standby=5:5:90.

US patent pending.

Easy to see large LCD The large, easy to

see LCD (32×16

mm) offers a clear

2 - d i g i t c h a n n e l

number indication.

Built-in regular charger circuitryRecharge the IC-M24 by plugging the wall

charger directly in to the radio. By eliminating

exposed metal charging points, the IC-M24 is

even more protected from water damage.

Volume loud and mute functionsThe volume loud/mute functions temporarily

change the volume to the maximum/minimum

level with two touches of a button. Depending

on the background noise level, you can easily

change the volume level to capture the received

message.

Other features• Submersible construction equivalent to IPX7

(1m depth for 30 minutes)

• Dual/Tri-watch functions • Auto scan function

• One-touch access to Ch 16

• 4-step battery life indicator

• Tag scan and Favorite channel functions

• Weather channel with weather alert (USA version)

• AquaQuake™ draining function

BP-266 3.7V, 1500/1590 mAh (min./typ.)

* BC-199SA/BC-145SA for 120V AC. SE for 230V AC. SV for 240V AC. BP-266 must be removed from the radio for charging in the BC-119N.

Applicable IP Rating and environmental test

Ingress Protection Standard

Waterproof IPX7 (Submersible protection)

Environmental Test Standard

Vibration IEC60945

RAPID DESKTOP CHARGER

BC-145S* BC-119N+AD-123*

CIGARETTE LIGHTER CABLEwith built-in DC-DC converter

BELT CLIP ANTENNA

CP-24

Li-Ion battery pack WALL CHARGER

Charges BP-266 in 2.5 hours. (approx.).

• Battery charger, BC-199S • Battery pack, BP-266

• Belt clip, MB-124 • Antenna, FA-SC58V

• Hand strap


FEATURES

OPTIONS


AQUAQUAKE is a trademark of Icom Incorporated. All other products or brands are registered trademarks or trademarks of their respective holders.

AnastasiaW

Highlight

Technology

Icom Catalogue