13
A-ZONE WiFi Camera Kit Email Alert Settings

How to set Email Alert on A-ZONE WIFI Camera Kit

Embed Size (px)

Citation preview

Page 1: How to set Email Alert on A-ZONE WIFI Camera Kit

A-ZONE WiFi Camera Kit Email Alert Settings

Page 2: How to set Email Alert on A-ZONE WIFI Camera Kit

1. Right-click the main interface "System Settings" -> "Network Settings" -> "E-Mail", as shown below:

Page 3: How to set Email Alert on A-ZONE WIFI Camera Kit
Page 4: How to set Email Alert on A-ZONE WIFI Camera Kit

• After entering the E-Mail setup interface, you need to configure the following:

• (E-Mail Function: Select Open)

• (SMTP Server: Enter the format smtp.live.com)

• (Port: set to 25)

• (Username: your mailbox user name (eg: your mailbox is [email protected] then your username is [email protected])

• ( Password: Enter your email password)

• ( Encryption Type: Default: Do not choose, If you click on 'test' but it shows failed, then modified the type to SSL)

• (From: Enter your full email address (eg: [email protected]))

• (To: Enter your email to receive alarm messages (eg: [email protected]))

• (theme: default on, you can change your own theme named)

• (interval: time interval to receive mail (if an alarm is triggered a high frequency, the time interval is too short can cause a mailbox full))

• ( Health mailbox on: normal operation for detecting input DVR)

• ( Health mailbox interval: the number of minutes during normal operation if the video recorder to send a message to the recipient that you set at intervals)

• (As shown below:)

Page 5: How to set Email Alert on A-ZONE WIFI Camera Kit
Page 6: How to set Email Alert on A-ZONE WIFI Camera Kit

After finishing the above settings, click the Test, show success, as shown below:

Page 7: How to set Email Alert on A-ZONE WIFI Camera Kit

• The video detection trigger E-Mail, the main interface, right-click the "System Settings" -> "Recording Settings", you need to detect the type of E-Mail triggered there, select the "motion detection", "video loss" or "video block", check "E-Mail notification", click OK, as shown below:)

Page 8: How to set Email Alert on A-ZONE WIFI Camera Kit
Page 9: How to set Email Alert on A-ZONE WIFI Camera Kit

The alarm detection trigger E-Mail, the main interface, right-click the "System Settings" -> "Recording Settings" -> "Alarm Settings", "channel", "work mode", "alarm duration", "video channel" settings, check the "E-Mail notification," click "OK", as shown below:)

Page 10: How to set Email Alert on A-ZONE WIFI Camera Kit
Page 11: How to set Email Alert on A-ZONE WIFI Camera Kit

When you are finished, if some triggered event occurs, you set the recipient mailboxes to receive mail event information. As shown (here is the motion detection QQ mailbox to receive mail messages received by the trigger occurs)

Page 12: How to set Email Alert on A-ZONE WIFI Camera Kit
Page 13: How to set Email Alert on A-ZONE WIFI Camera Kit

Thanks for watching.