Upload
alarmtech-systems-for-life
View
181
Download
1
Embed Size (px)
Citation preview
How To Replace Your Alarm System Battery
www.alarmtech.ca
Step 1Monitored Customers — have your system & pass
numbers ready & call the monitoring station (519-663-2036
or 1-800-333-7721) & ask them to put your system on test.
www.alarmtech.ca
Step 2Open the control panel door (usually located in the basement near the electrical panel or in a closet).
www.alarmtech.ca
Step 2.2If locked, look on your keychain or look nearby/on top
of the Control Panel for the key.
www.alarmtech.ca
Step 2.2 cont…If you can’t locate the panel key, contact Alarmtech (519-
434-3996) to borrow a key or get instr. on other solutions.
www.alarmtech.ca
Step 3Remove the leads from the battery—you may have
to wiggle the battery leads to get them off.
www.alarmtech.ca
Step 3.2Hold the wires so they do not touch (there is not an
electrical hazard if they do, but a fuse could short out).
www.alarmtech.ca
Step 4Remove battery from the Control Panel & set it aside to be recycled. Do not discard with household waste.
www.alarmtech.ca
Step 4.2Alarmtech will recycle your battery for you! Drop it off
at our office (549 Huron St., London, ON / 8:00am–4:30pm) or leave it outside the door during off-hours.
www.alarmtech.ca
Step 5Remove any plastic protective covers, that may be on the battery terminals to expose the metal terminals.
www.alarmtech.ca
Step 5.2Place the battery into the Control Panel and attach the
black lead to the black terminal.
www.alarmtech.ca
Step 5.3Attach the red lead to the red terminal.
www.alarmtech.ca
www.alarmtech.ca
Step 5.4Close the Control Panel door and lock it.
www.alarmtech.ca
Step 6Proceed to the keypad & acknowledge the tamper alarm
from opening the control panel door. Most panels will
need your code entered & off then enter your then code
and & off a second time.
www.alarmtech.ca
Step 7Call the Monitoring Station (519-663-2036 or 1-800-333-7721)
& remove the system from test & confirm the panel
tamper has reset.
Congrats you have changed your battery!
www.alarmtech.ca
www.alarmtech.ca
The keypad may still display ‘low battery’ for several hours. You can use the system as per
normal while the battery charges.
www.alarmtech.ca
If after several hours the ‘low battery’ does not
clear, please arm & disarm the system twice in
a row & if it still does not clear please call
at 519-434-3996 / 1-800-461-5800.