Key College Technical Assistance
Key College Technical AssistanceClassroom InstructorMark
RoseClick anywhere to continue to next page
Court Reporting Machine Setup Instructions
Click anywhere to continue to next pageTo hear audio, hover
mouse over speaker and click on the play button.
Here we will setup the correct writer model and com port.Click
On Settings From The Eclipse Toolbar Menu
Click anywhere to continue to next page
Click on the input tab to open writer settings.
Click anywhere to continue to next page
Select appropriate writer by using the dropdown menu.
Click anywhere to continue to next page
Click on the setup tab to check for proper com port
settings.
Click anywhere to continue to next page
Note the com port number and then click on the device manager
tab.
Click anywhere to continue to next page
If the com port number is different from the previous Eclipse
menu, close this window and change the com port to this number
under USB to Serial device.
Using the dropdown menu, expand the line, Ports (COM &
LPT).
This is the end of the tutorial.
Click ok until you exit all menus.You may need to reboot your
system to update the changes.
If needed, change the port number to what was noted in the
previous slide using the dropdown menu.
