Upload
cs-unitec
View
111
Download
2
Tags:
Embed Size (px)
DESCRIPTION
CS Unitec's catalog pages for quality industrial power tools including drill and drive units, tube rolling motors, tube expanding motors, electri drills and drive units, and drill motors and power drivers.
Citation preview
Electric Drills and Drive UnitsHigh-torque, multi-geared and variable-speed motors
ELEC
TRIC
DRI
LLS
AN
D D
RIV
E U
NIT
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 55
Heavy-duty Drills for Industrial andConstruction Applications:
• High-torque output
• Variable-speed, two- and four-geared drills foroptimum speed selection
• Reversible motors and electronic torque controlon selected models
• Ideal for special applications including valveturning, tube rolling and other jobs
• Safety slip clutch on 11/4" capacitiesto protect operator and tool
• Drilling capacities up to 11/4" in steel
• Special OEM motors available on request
• One-year warranty
EHB 16/1.4 S
EHB 16/2.4 S
EHB 16/2.4 R/L
EHB 16/2.4 S/RL
EAW 16/2 R/L
EHB 20/2.4EHB 32/4.2EAU 34.4* All units available in 220 Volt / 50Hz Special Motors available upon request.
7.3
10
10
10
9
10.5
15.5
20
MotorPower(Amps)
110V
110V
110V
110V
110V
110V
110V
110V
Voltage*
5/8"5/8"5/8"5/8"
N/A3/4"
11/4"
–
DrillingCapacityin Steel
12
19
19
19
8
32
112
133
TorqueOutput(ft./lbs.)
NO
NO
YES
YES
YES
NO
NO
YES
Revers-ible
6.8
7
7
7
7
9.2
15.2
19.5
Weight(lbs.)
5/8" Keyless5/8" Geared5/8" Geared5/8" Geared5/8" X 16 UN
MT2
MT3
MT3
Chuck/Arbor
0-500
0-430/0-760
430/760
0-430/0-760
510/950
250/450
110/175/245/385
80/130/360/570
Load Speed (RPM)Model No.
Model EHB 20/2.4
Model EHB 16/1.4 S Model EHB 16/2.4 SModel EHB 16/2.4 R/LModel EHB 16/2.4 S/RL
Model EHB 32/4.2
SLO
W-S
PEED
ELE
CTR
IC D
RILL
S A
ND
DRI
VE
UN
ITS
• 1-800-700-5919 • Visit our Web site at www.csunitec.com56
Slow Speed: two-geared, variable-speed reversible motors
1/2" and 3/4" Square Driveaccessories allow motorcompatibility for variousdrive applications.*
Up to 11/4" twistdrill capacity
Model EHB 32/2.2 R/RLModel ETE 32/2.3 R/RL
Model ETE 32/2.3 R/RL(shown with optionalSquare Drive adapter)
• High-torque, two-geared and variable-speedreversible motors
• Ideal for drilling, reaming and tapping steel
• Driving applications include mills, spindles, barboring, pipe beveling and valve turning
• Perfect for tube rolling and expanding for fire tube and water tube boilers
• Mechanical safety clutch prevents operator injury ordamage to the tool
• Morse Taper #3 arbor
• One-year warranty
EHB 32/2.2 R/RL
ETE 32/2.3 R/RL
** All units available in 220 Volt / 50Hz*** With Expander (Up to 2 1/2" with Bead Roller)
* 1/2" Square Drive with MT3 – Part No. 830-1230-0503/4" Square Drive with MT3 – Part No. 830-1230-075
16.3
16.3
MotorPower(Amps)
110V
110V
Voltage**
11/4"
N/A
DrillingCap. inSteel
2"
3" ***
TubeRolling(max.)
YES
YES
Revers-ible
14
15
Weight(lbs.)
MT3
MT3
Arbor
92 max.
174 max.
TorqueOutput(ft./lbs.)
YES
NO
TorqueControl
60-140 /200-470
30-75 /90-230
LoadSpeed (RPM)
Model No.
Electric Drills and Drive Units
Special Electric Motor Options
ELEC
TRIC
DRI
VE
UN
ITS
/ SP
ECIA
L M
OTO
RS
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 57
Forward/Reverse Control
Electronic Torque Control
Variable-speed Dial
Spindle Options:MT 2 / MT3
Square Driveor Threaded
Gear Selection Knob
Holes for Mounting(EAU 34.4 shown)
Control Boxesor Handles
High-torque, reversible electric drill motors for custom applications
Custom Design Options:� Forward/Reverse
� Variable Speeds
� Multiple Gears
� Spindle: MT or Special
� Control Boxesor Handles
� 1/2 to 4 HP
� Modular Design
Contact us today toconfigure the motorthat meets your specificdriving applications.
Drivingapplicationsinclude mills,spindles, bar boring,tube rolling, valveturning and more.
PNEU
MA
TIC
DRI
LLS
AN
D D
RIV
E U
NIT
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com58
Pneumatic Drills and Drive UnitsHigh-torque reversible drilling and tapping machines
Model2 1261 0010
• High-torque reversible drilling, tapping and threading machines
• Ideal for drilling, reaming, tube rolling, tube expanding and tapping
• Use for special applications including mills, spindles, slides, controllers,pipe tapping, valve turning and more
• Drill chucks and Morse Taper arbors
• Hammer drills for drilling concretewith up to 2200 blows per minute
• Special OEM air motors available on request
• One-year warranty
Pistol Drills
2 1261 0010
Hammer Drills (for concrete and underwater applications)
2 1266 0010
D-handle Drills
2 1310 0010
2 1311 0010
Morse Taper Drills w/ Feed Spindle
2 2089*
2 2506*
2 2502*
* The last four digits of the Model No. identify the type of throttle.Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
0.7
0.75
0.8
0.8
1.7
2.5
2.5
MotorPower(HP)
850
950
650
650
250
220
80
LoadSpeed(RPM)
1/2"
1/2"
1/2"5/8"
11/4"
11/4"
2"
DrillingCap. inSteel
N/A
N/A
N/A
N/A
1"
2"
21/2"
TubeRollingCap.
7 max.
7 max.
8 max.
8 max.
36 max.
63 max.
173 max.
TorqueOutput(ft./lbs)
93/4"
12"
121/2"
11"
261/2"
261/2"
261/2"
Length
N/A
N/A
N/A
N/A
15/8"
21/2"
21/2"
FeedLength
4.6
6.7
12
12
28
32
37
Weight(lbs.)
21
21
24
24
24
70
70
CFMat 90PSI
1/2" Chuck
1/2" Chuck
1/2" Chuck
MT1
MT3
MT3
MT4
Chuck/Arbor
NO
NO
NO
NO
YES
YES
YES
Revers-ibleModel No.
Model2 1310 0010
See page 60for Rotary
Hammer Drills
Pneumatic Pistol DrillsPneumatic Hammer Drills
Morse Taper Drills w/ Feed Spindle
D-handle Drills
Model2 2089 0030with reverse andsafety twist throttle
Model 2 1266 0010
ATEXATEX
Corner Drills and Drives
CO
RNER
DRI
LLS
AN
D D
RIV
ES
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 59
ATEXATEX
Pneumatic and hydraulic: high-torque drilling, reaming and driving units
Model 2 1801 0030
• Small side-to-side distancefor working in tight spaces
• Self-closing roll throttle
• Built-in oiler for motor
• Ideal for bridge reamingand drilling applications
• One-year warranty
• Visit www.csunitec.comfor dimensions
2 2081*
2 2087*†
2 2088*†
* The last four digits of the Model No. identify the type of throttle. † Square drive accessories available (see above). Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
13/16"7/8"7/8"
SquareDriveID
413
413
138
TorqueOutput(ft./lbs.)
YES
YES
YES
Revers-ible
3"
3"
2"
TubeRollingCap.
11/2"
11/2"3/4"
TappingCap.
53
53
53
CFM at90 PSI
10.9" x 26.5"
10.9" x 26.5"
10.9" x 26.5"
Height xLength
29
29
29
Weight(lbs.)
1.35
1.35
1.35
MotorPower(HP)
20
20
60
LoadSpeed (RPM)
PneumaticDrive UnitModel No.
Nonreversible
2 1602 0030
2 1701 0030
2 1801 0030
Reversible
2 2104 0030
Model No. 2 1602 0030 has a 3/8" NPT air inlet. 1/2" (13mm) hose is recommended. All other models have 3/4" NPT air inlet. A 1/2" (13mm)hose is recommended for model 2 1701 0030. A 5/8" (15mm) hose is recommended for models 2 1801 0030 and 2 2104 0030.
#1
#2
#3
#4
MorseTaper
5/8"7/8"
11/4"
21/8"
Drilling(in steel)
N/A
N/A
N/A
2"
TubeRollingCap.
7
35
53
86
TorqueOutput(ft./lbs.)
500
270
260
180
LoadSpeed(RPM)
21
49
63
71
CFM at90 PSI
12.5"
20.9"
22.5"
23.8"
Length
7
19
25
37
Weight(lbs.)
0.7
1.8
2.6
3.0
MotorPower(HP)
1/2"5/8"
1"
2"
Reaming(in steel)
PneumaticCorner DrillModel No.
2 1806 0010 #3
MorseTaper
11/4"
Drilling(in steel)
N/A
TubeRollingCap.
60
Torque Output(ft./lbs.)
220
LoadSpeed(RPM)
4 GPM@2000
OilFlow/PSI
21"
Length
25
Weight(lbs.)
3.8
MotorPower(HP)
1"
Reaming(in steel)
HydraulicCorner DrillModel No.
Corner Drills and Bridge Reamers
• Ideal for heavy-duty reaming, tube expandingand tapping
• Perfect for special driving applications,including pipe tapping and valve turning
Slow-speed, High-torqueStraight Drive Units
Model 2 2087 0010with reverse and lever throttle
Square Drive Accessories 2 2089 7020 – 7/8" Male Square Drive to 3/4" Male Square Drive2 2089 7070 – 7/8" Male Square Drive to 1" Male Square Drive6 1016 7940 – 7/8" Male Square Drive to 1" Male Square Drive
with retaining pin