Click here to load reader
Upload
instone
View
402
Download
2
Embed Size (px)
DESCRIPTION
Installation instructions for manufactured stone veneer and natural stone veneer with a drainage system
Citation preview
2828
Adhered Veneer - ComponentsSubstrateWeeps or weep screedFlashingWater-resistive barrierDrainage mat (option)InsulationLath - typesFastenersMortar scratch coatModified mortars / adhesives Mortar setting bed / modifiedVeneer materialGrout / mortarSealer (optional)
2929
substrate
water-resistive barrier / flashing
metal lath & drainage mat behind
mortar scratch coat
fasteners
weep screed
sealer (optional)
grout / mortar
veneer
mortar setting bed
Adhered Veneer - Components
3030
Adhered Veneer System -2
Exterior SheathingWRB - 1Drianage Mat with facingLathScratch CoatMortar Setting BedVeneer UnitGrouted Joints (if required)
Optional Sealer
Flashing - 1
Flashing - 2Weep Screed
3131
Drainage Mats Recommended
• Improves drainage and drying of wall
• Prevents deterioration• Capillary break• Minimum gap of 3/16" 1
• Maximum gap of 3/4" 1
1. Masonry Veneer Manufacturers
Association
NAHB
3232
Adhered Veneers and Continuous Insulation
3333
Substrate / Insulation / z-clip / sheathing
water-resistive barrier / flashing
metal lath & drainage mat behind
mortar scratch coat
fasteners
weep screed
sealer (optional)
grout / mortar
veneer
mortar setting bed
Adhered Veneer with Insulation
3434
Adhered Veneers and Continuous Insulation
CMU Veneer - see material Air SpaceW1.7 Joint Reinforcing and W 2.8 (3/16”) TiesAir/Moisture/Vapor BarrierW 1.7 Joint ReinforcingRigid Insulation
Cement Scratch Coat
Mortar Setting Bed
Thin Adhered VeneerGrouted Joints OptionSealer if required