View
198
Download
3
Tags:
Embed Size (px)
DESCRIPTION
Citation preview
OFFICIAL © Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
Additive manufacturing for future
military equipment.
CDE competition 24 June 2014
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
Presentation overview
• Introduction to the competition
• Technical challenges
• Competition details
• Questions on the Competition
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
Introduction to competition
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
Military interest in Additive Manufacturing
• Additive manufacturing is likely to be a game changer for the
military across a wide range of areas.
09 July 2014
© Crown copyright 2013 Dstl
Procurement Compression of the time and cost to go from
prototype to in service evaluation. IP!
Logistics Manufacturing bespoke or long lead time parts
closer to point of use. Improvements in repair and
maintainability.
Equipment
optimisation Lighter weight platforms due to design freedom.
Enhanced
functionality Doing things in a radically different way!
OFFICIAL
MOD Strategy on Additive
Manufacturing
"To openly state the MOD position and direction on the
use of additive manufacture processes, tools and
techniques…...“
1. Operational & Requirements
2. Technical
3. Commercial
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
How can you demonstrate
enhanced functionality?
• Disruptive advances in military
equipment could include:
– Combination of functions e.g.
power or electronics forming part
of the structure or casing
– Modular, generic architectures to
enable interoperability
– Bespoke ‘design for mission’
structures or systems
OFFICIAL 09 July 2014
© Crown copyright 2013 Dstl
Additive manufacturing = key enabler
OFFICIAL
Technical challenges
© Crown copyright 2013 Dstl
09 July 2014
Embedded sensors Embedded rechargeable
power sources Integrated electronics
Integrated novel
stealth or camouflage
Rapid build Mimicking biological systems
OFFICIAL
Competition specifics
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
Important information
• Competition is a 2 phase approach.
• Phase 1:
– Phase 1 will be contracted through CDE.
– Phase 1 bids must articulate the scope of a
potential phase 2.
– Phase 1 deliverables must include a more detailed
costed proposal for phase 2 in order to be eligible
for follow-on funding.
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
Important information
• Phase 2:
– Promising concepts from phase 1 may be selected
for phase 2 funding, contracted through Dstl.
– Dstl does not commit to fund any follow-on work,
but will consider phase 2 proposals at a second
decision conference at the end of phase 1.
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
Funding and Technology
Readiness Levels (TRL)
Phase Total
anticipated
budget
Typical
project
funding
Typical
project
duration
Typical
TRL
1 £750 k £40 k –
£80 k
6-8 months 3-4
2 £1.5 mil £200k -
£300k
12- 24
months
5-6
© Crown copyright 2013 Dstl
09 July 2014
For a description of technology readiness levels see the
Acquisition Operating Framework
https://www.gov.uk/acquisition-operating-framework.
OFFICIAL
Important dates
• Competition close date 28 August, 5 pm BST
• Phase 1 projects complete by 30th June 2015
• See competition briefing document for full list of dates
for both phases
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL
Opportunities for further
engagement
• Technical queries can be sent to [email protected].
– Please use “Additive manufacturing” as a prefix in the title.
• Funded projects will have opportunities to participate
in project showcases after each phase.
© Crown copyright 2013 Dstl
09 July 2014
OFFICIAL 09 July 2014
© Crown copyright 2012 Dstl
• Questions?
OFFICIAL